Database Info

Stuck at screen adjusting!! (Broken screen on p3600)

Hi i recently got this htc p3600 with broken touchscreen, the lcd is fine but the touchscreen have some cracks in it.
I don't know anything about what versions of roms etc is in it. All i know is that windows mobile's in it.
When i start up the phone i get a green windows mobile screen witch says that i should click anywhere on the screen to calibrate the screen. I do htat because i can't do anything else and then this X shows up and i am suopposed to click on it in order to calibrate the screen.
I'm doing this, first in the middle then it moves to each corner but when i clicked all the corners i goes back to the middle nad starts over agaiN!!
I've clinged this stupid X for like 15 minutes now but nothing seems to happen!! Whats the problem? Can it be locked to the sim-card i've inserted??? Please help me!

guess you will have to replace the digitizer.othewise, you may try connect it with active sync and delete the call program from auto run - hopefully theres some default cal data in it.

Don't really understand what you're saying, im new to this phone and i got i broken. ALready ordered a digitizer but i want to test it out now. Tried to add a calibration value to the registry but i cant do anything because its locked.
So i think enableing rapi will o the trick but i cant start the phone to start the enable rapi program :/:/
Is there any other way to bypass this screen? Like killing the process with some taskmanager??

go search for remotecalibration.exe

[Q] HTC Touch Pro 2 Problem.!

Hi.! I need help fast.! I am an American. My name is Kenisha and I have the HTC Touch Pro 2. My phone has been acting funny everyday since I recieved it from AT&T. I try to use the keyboard but if I slide my phone too hard, the phone will power off. Same way if I want to slide my phone back to its original position. I do not know why this is happening. The latest problem I have had is that my phone has a weird screen on it. Four colors from top to bottom: Red, Green, Blue and White. I tried to reset my phone, it had no effect, I tried to take the battery out and see what happened. Also, I tried to reset the phone by pressing the the call button and end button and power button all at the same time. Again nothing worked. The words also say that there is "No File". Please help because i do not know what is wrong. I have only had this phone for two months

Take it to an At&t store, and get it swapped, did you try to install a rom or something

Black screen but phone boots, Z3.

Hello All,
Basically what happened is this:
I got phone D6603 with "Vodafone protect" lock on and owner gave me a possible code for phone. I replaced screen and then found that lock requires only numeric pin, not what I was given. So, he then reset pin and deactivated lock, but I still had it on no matter what. So, I tried to flash new firmware into it for same phone and got it done, but now phone screen stays black all the time with only backlight on. Phone seemingly loads something (probably the new phone welcome screen after flash), which I cannot see, but when connected to computer from fastboot or something then all system files are visible.
When I boot phone from off position, it boots to a point where I can use side button to switch on and off the screen but touch does not respond because nowhere it reacts to touch or maybe I do not know where and what to click on screen.
What could be the likely solution? I do not think that phone is bricked, but something is wrong with system as it does not light up the screen properly. I tired flashing 2 times successfully with same result.
Any advice would e appreciated.

Hi, can this thread be deleted because I am getting phone swapped and thread no longer relevant? Thanks.

Galaxy S8+ black screen?

Hey there,
I have got a Samsung Galaxy S8+,SM-G955N.
Some days before,my phone was stolen by a thief,then I asked for the police for help.The police found the phone for me in the end.
I was so happy at first for my phone was survived.But then I found my phone's screen is always black.When I connect my phone with the wireless charger and charger,I can hear the sound of connecting the power,and I can hear the notification sound,when someone calls me,I can hear the ring!And "hi,bixby"also works!I wonder why?!
I have rebooted so many times,and tried to reboot the phone to recovery mode and download mode.I ended up with failure.
(My phone has been flashed a custom ROM and TWRP.My phone has a lock screen password and lock screen protect which means you can't reboot and power off.)
I really don't know what the thief had done......But my phone wasn't fall off from high places I can be sure......For the phone has a perfect body.)
Then I tried many times to reboot one day the screen recovered! But I found that the screen is not stable,which means it has many bars,it will disappear and then appears at another zone.Just like the old TV set.
I want to wipe /data,then I rebooted to recovery mode.But.:crying:the screen then do not working...... Just like before.
Then I tried many times,I entered the recovery mode.The screen works in the end,but the colours seems very strange,a little purple.and the touch screen don't work at all.I used the mouse to swith the brightness in TWRP,but when I turn the brightness to over 80% or lower than 40%,the screen looks dark.I can hardly see the contents.
So I want to ask you all for help,is this a hardware or a software issue?How can I solve it?
Thank you all and I love you all!!!!!!!!!:crying:
I am a student......And I am so poor.....
Thank you all again!!!!!!!!!!!

I'm hoping you have warranty. Seems like you have done a thorough job at trying to problem solve. I'd head to a repair place for a quick confirmation and maybe repair.

seems like a broken/damaged flex in the screen

Only splash screen even in Android

So, first I thought my brother's A51 was water damaged because it was wet a little bit and charging was being interrupted. I left the phone turned off for the night and wanted to look at it again the next morning. The problem is that the screen or something else stopped working.
The screen works fine in Download mode, Recovery mode, or at splash screen with phone's model name, the problem begins when it's booting to Android. It's still stuck at the splash screen. no boot animation, no lock screen visible, just a model name. It's not bricked, because I can still unlock the phone (didn't have a password) and I can hear the unlock sound or charging sound (it started working again).
I tried factory reset through recovery - didn't help, flashing fresh firmware from Frija - didn't help. The only thing that changed is now the splash screen brightness goes down a bit and I noticed that until I am touching the screen so the phone can't lock itself it doesn't turn off the splash screen, but when I press the lock button it turns off the screen and I can't turn it back on, but the phone still works because I can hear charging sounds and it shows up in Device manager.
I also opened it because I wanted to see if there's any water damage, but I didn't see any water marks or burnt components. I cleaned the charging board with alcohol and let it dry but that didn't help.
I'm worried that there's something wrong with the motherboard or the charging board because it has a screen connector.
I can also see that some people here have similar issues:
Unbrick A51 - Stuck on samsung logo
Hi, My phone is stuck on A51 logo for days now it charges - I can enter download mode easily - I can sometimes enter recovery mode some other times it doesn't let me I tried flashing different stock ROMs of android 10, 11 for the phone with...
forum.xda-developers.com
black screen after splash and unable to factory reset, possibly frp?
Apologies for formatting, typing up on my phone during my break at work. To be more specific, I have a samsung a51 that recently had a black screen of death with no known cause. The samsung splash screen as well as the recovery menus alll work...
forum.xda-developers.com
I should also add that I don't have access to settings so I can't unlock OEM and flash custom recovery / ROM. I also cannot downgrade to Android 10 (duh)

I have exactly the same behaviour here.
I ordered a "defect" A51 on Ebay which was not working. I opened it an saw a water damage at the USB-C charging board. Since there was a lot of oxydated parts I ordered a replacement for this board.
After cleaning an replacing the charging board I have the same issue as szerbi. I see the charging screen (while powered off), I can enter download mode and transfering stock firmware using Odin, I can enter recovery mode. While all these states the display works well and I cannot see any damages like a broken display.
I even got it working correctly after several Odin firmware update and recovery mode / factory reset attempts and I could install some apps and set up my google account. I was very happy. But after some hours again: no screen while Android is running.
Now, when Android is running I hear the charging and the screen shot (pressing volume-down + power buttons) sounds and the phone will be visible as a storage device while connecting to a PC.
Conclusion: The display is black while Android is running. Since it was shortly active I assume either a loose contact on one of the flex cable connetions or a water damage at the displays flex board. Unfortunately latter cannot be checked without dividing the display from the display frame. I assume this is an irreversible process.