All
my XDaIIi keeps on failing to make a connection to the internet, yjis is either through WLAN/or GPRS. I keep getting the following errpor message;
Unable to connect; you have no modem entries created, and no network card present.
Any ideas on what this means and how to resolve it at all please?
Thanks
Pete
Related
small problem connecting to the internet. message comes up , unable to connect you have no modem entries created and no network card present .
Just had the same problem on orange
The connection info got corupted, dont know how. I had to add it again.
This is what I did:
Goto; Settings, connections tab, connections icon, add new connection option.
Give it a name, and pick Cellular Line GPRS.
My Access point was called oraneinternet, I rang orange to get this but I have found the old corupted connection setting and the info was still readable.
Hope this helps
Hi all, I am new here and to smart phones, did the "cc" tweak for the volume, worked great, I now have a wifi issue, i have signal, the phone see's the signal, but when i launch IE it say's "your internet comm is not config properly. Please verify your settings in data connection" I have looked at things and cannot find anything that loks wrong. I find connections but not data connections. If anyone can help.. I am deployed in Iraq and have very little access to any kind of help...Thanks-- ps..feel free to use email
It may be that internet explorer is set up to only use WAP and therefore not able to get a connection. In your IE options, make sure it says Internet or Work depending on how you set your wifi up.
Stay safe.
Hi guys
Every time my Trinity Sync with my PC I get the following error message:
"Unable to obtain server assigned IP address. Try again later or enter an IP address in Network settings"
Can someone please tell me what does it mean and how can I get rid of it. The synchronisation process works fine and all my data is synchronised OK.
Thank you
Would like to hear the answer as well...
It happens every now and then, usually 15 minutes or so after I disconnected my TyTN from a network (gprs, wifi or activesync usb).
Jörg
Is it possible to permanently affect my Wizard's internet connection by over flashing??
I'm having a problem connecting to the internet. It doesn't connect via WiFi whether on an open or WEP network (I'm testing it with 2 routers -- mine and my neighbors). It connects to GPRS just fine as long as I put the right ISP info. But when I try to load a page in IE it comes back with 1 of 2 error messages:
1)
Error 502 - Bad Request
The server could not resolve your request for uri:
2)
Cannot obtain a server-assigned IP address. Try again later or enter an IP address in Network settings.
I was running a custom made vanilla 1413 for the longest time. Then yesterday tried MFrazzz's 1913 and now ANTC's. Between one of those two I am not unable to connect to the internet. I even flashed back to the 2.24 official T-Mo ROM and even with the factory settings it still not working for either GPRS or WiFi. In the past hour I've tried T-Mob official, ANTC 2.0 and XM6R4...all the same problem.
So that virtually eliminates the possibility that it was either a bad radio, corrupted Ext ROM or a bad flash. It definately seems like my Wizard isn't being given an IP address. So that would be a software/ROM/registry problem, right? Well then why is it not working with 3 fresh ROM flashes??
Any suggestions??
If I connect it to my PC via usb/activesync and use the PC's internet connection then it will go ahead and load webpages.
As soon as I disconnect the USB cable then it'll load up the GPRS connection and try to load a webpage and timeout with one of the errors above.
One strange thing I noticed is that when it gives the 502 error it removes the domain from the uri. Example:
Target URI:
http://mobreader.com/proxy.aspx?s=http://test.com...
Response:
Error 502 - Bad Request
The server could not resolve your request for uri: /proxy.aspx?s=http%3A%2F%2Ftest%2Ecom...
seems your proxy is not functioning correctly
reflash with original rom and then this rom you would like
you can also try and delete all connections but i doubt it helps..
I'm on T-Mobile full internet plan, not T-Zones or anything, so no need to set a proxy. Just put in the access point as wap.voicestream.com and it should work.
I've input the data manually as well as tried with the t-mobile wap setting cabs. Doesn't make a difference. Also since these are freshly installed ROMs (including an official T-mobile ROM) there shouldn't be any proxy settings pre-set, right?
yes i am aware of that..
i need to explain myself more , sorry for that..
what i mean is the proxy inside the phone , not the one u setup with t-zones
or any related..
Ok a little update...
I was able to connect via Wifi this morning, it was either
A) Registry changes to HKLM>Comm>TNETWLN1>Params>HTCPreloadStatus to value of "1"
B) Registry change to HKLM>Comm>TNETWLN1>Params>HTCPreloadWifi to value of "1"
The router assigned me an IP address now and fully connected. I'm able to pull up websites now. Sometimes the above registry settings mysteriously change back to "0" value and if that happens then I won't be able to pull up a website. So I know what was causing the WiFi issues.
But still don't know what's the problem with GPRS. Still can't load a website via URL or even IP address. Is there a similiar registry edit that I can make that will restore GPRS connection ability?
Thanks in advance guys.
I disabled the Sprint proxies using the guide http://forum.xda-developers.com/showthread.php?t=1283229 here and now I get an error message "Unable to establish wireless connection MIP: 75" every time I boot up the phone. The thing is, it connects fine. This wouldn't be an issue but the error message won't leave my notification bar. Please help!