small problem connecting to the internet. message comes up , unable to connect you have no modem entries created and no network card present .
Just had the same problem on orange
The connection info got corupted, dont know how. I had to add it again.
This is what I did:
Goto; Settings, connections tab, connections icon, add new connection option.
Give it a name, and pick Cellular Line GPRS.
My Access point was called oraneinternet, I rang orange to get this but I have found the old corupted connection setting and the info was still readable.
Hope this helps
Related
Hi all, I am new here and to smart phones, did the "cc" tweak for the volume, worked great, I now have a wifi issue, i have signal, the phone see's the signal, but when i launch IE it say's "your internet comm is not config properly. Please verify your settings in data connection" I have looked at things and cannot find anything that loks wrong. I find connections but not data connections. If anyone can help.. I am deployed in Iraq and have very little access to any kind of help...Thanks-- ps..feel free to use email
It may be that internet explorer is set up to only use WAP and therefore not able to get a connection. In your IE options, make sure it says Internet or Work depending on how you set your wifi up.
Stay safe.
HI all,
first of all i want to thankyou all for this awsome site and keeping the good work going.
I need some help with wifi setup.
I tried to setup my wifi with my 8125 using wifi companion and wifi fofum and both detected my network and connected to it successfully however, when i try to connect to the net using internet explorer a msg pops up saying that "cannot connect" Dialed +some number and then it says No modem at above number. To check connections settings change them if needed. I upgraded my rom to the latest one from cingular how ever i never entered this number which it is showing. Can some one help me with this issue and tell me what should i do.
thanks in advance.
Ps:- I tried wifi companion and wifi fofum separately not together.
thanks.
sounds like internet explorer is trying to connect to gprs or cellular modem or somthing.
you need to go to settings, connections, advanced, select networks, and make sure the drop down lists are set to "My Work Network"
Also check under setting, wireless lan, powermode and move the slider all the way to the left for best performance. I cannot connect to any routers when it is in the middle (the default setting). I have no problems connecting anywhere with it set to best performance.
Is it possible to permanently affect my Wizard's internet connection by over flashing??
I'm having a problem connecting to the internet. It doesn't connect via WiFi whether on an open or WEP network (I'm testing it with 2 routers -- mine and my neighbors). It connects to GPRS just fine as long as I put the right ISP info. But when I try to load a page in IE it comes back with 1 of 2 error messages:
1)
Error 502 - Bad Request
The server could not resolve your request for uri:
2)
Cannot obtain a server-assigned IP address. Try again later or enter an IP address in Network settings.
I was running a custom made vanilla 1413 for the longest time. Then yesterday tried MFrazzz's 1913 and now ANTC's. Between one of those two I am not unable to connect to the internet. I even flashed back to the 2.24 official T-Mo ROM and even with the factory settings it still not working for either GPRS or WiFi. In the past hour I've tried T-Mob official, ANTC 2.0 and XM6R4...all the same problem.
So that virtually eliminates the possibility that it was either a bad radio, corrupted Ext ROM or a bad flash. It definately seems like my Wizard isn't being given an IP address. So that would be a software/ROM/registry problem, right? Well then why is it not working with 3 fresh ROM flashes??
Any suggestions??
If I connect it to my PC via usb/activesync and use the PC's internet connection then it will go ahead and load webpages.
As soon as I disconnect the USB cable then it'll load up the GPRS connection and try to load a webpage and timeout with one of the errors above.
One strange thing I noticed is that when it gives the 502 error it removes the domain from the uri. Example:
Target URI:
http://mobreader.com/proxy.aspx?s=http://test.com...
Response:
Error 502 - Bad Request
The server could not resolve your request for uri: /proxy.aspx?s=http%3A%2F%2Ftest%2Ecom...
seems your proxy is not functioning correctly
reflash with original rom and then this rom you would like
you can also try and delete all connections but i doubt it helps..
I'm on T-Mobile full internet plan, not T-Zones or anything, so no need to set a proxy. Just put in the access point as wap.voicestream.com and it should work.
I've input the data manually as well as tried with the t-mobile wap setting cabs. Doesn't make a difference. Also since these are freshly installed ROMs (including an official T-mobile ROM) there shouldn't be any proxy settings pre-set, right?
yes i am aware of that..
i need to explain myself more , sorry for that..
what i mean is the proxy inside the phone , not the one u setup with t-zones
or any related..
Ok a little update...
I was able to connect via Wifi this morning, it was either
A) Registry changes to HKLM>Comm>TNETWLN1>Params>HTCPreloadStatus to value of "1"
B) Registry change to HKLM>Comm>TNETWLN1>Params>HTCPreloadWifi to value of "1"
The router assigned me an IP address now and fully connected. I'm able to pull up websites now. Sometimes the above registry settings mysteriously change back to "0" value and if that happens then I won't be able to pull up a website. So I know what was causing the WiFi issues.
But still don't know what's the problem with GPRS. Still can't load a website via URL or even IP address. Is there a similiar registry edit that I can make that will restore GPRS connection ability?
Thanks in advance guys.
My Polaris regularly loses the connection to my cellular operator (Vodafone in the Netherlands).
It happens more than once a day and even in areas with good reception.
The display then shows "No Service" where normally the operator name is shown and the icon for signal strength shows an antenna with a cross.
This in itself wouldn't be such a problem, if the phone tries to find the operator after the connection is lost. But it doesn't. Once it is lost, it stays lost.
I have to disable the phone in the communication manager and enable it againt to force the Polaris to search for the operator network.
My previous phone (a Nokia) didn't experience this problem and was used with the same SIM.
Does anyone else experience this problem?
And more important: is there some kind of setting (registry key?) to force my phone to search for my operator?
I too have the same problem. This happens for EDGE connection also on my mobile. When ever i connect and disconnected the device to my laptop, the connection to my EDGE connection is disconnected. Even if i open a new internet address, it will say cannot connect to server. I need to soft reset the device to connect to internet. I am having T-mobile USA connection. Please help. It disturbs a lot.
I was wondering if there is any way that when phone needs to connect to the internet it pops up a message asking which internet access i want to use, i have a fuze and dont have an internet plan and i noticed that most of the times i do something it connects to the att internet instead of my wireless network.
thanks in advance
settings---> connections and modify the connection so that it can't automatically connect to it. there are also programs that I think can stop the gprs/edge from coming on, something similar to nogprs or something like that.
"http://www.benrichards.co.uk/downloads/NOGPRS.zip DEAD
This will allow you to shut off your gprs connection, it will not set up your wifi connection. You must get that to work also.
Here is the site where the link was posted
http://www.benrichards.co.uk/?p=180 "
snatched from eagle1 on hofo
try this one.
http://forum.xda-developers.com/attachment.php?attachmentid=40638&d=1180860606
Here's an explanation of how it works by stewD!http://forum.xda-developers.com/showthread.php?t=310087
Tested, works like a charm. Just run cab, and look for a no data icon in programs. CLick connection and toggle. Make sure the connection is deactivated in comm manager first, for nodata to work. Try connecting, and voila ! No gprs.
pce
thanks man thats really what i needed, 1 question when deactivated does it still show the 3g on the top of the phone?