Please tell me how I can arrange all contacts consistently on my O2 XDA ll; for some reason new contacts appear either with the surname first or sometimes with the Christian name first.
Thanks!
A possible workaround:
I correct them in Outlook. Haven't found a way to do it right with the XDA.
Regards,
Mark
(On XDA itself) Where you input the name of the person within Contacts, type in their full name and then tap the arrow next to this field.
You will see that the second part of the name has been placed into the surname field. If you cut this back up to the first name field and behind the first name, the first name will now appear first within contacts.
Hope this helps
Related
Say a person that is not in my contact list calls me on my XDA, although I can see the number in the phone application, I cannot just copy it or easily create a new contact using the number unless I write it down on paper first, a bit of an oversight by MS or am I missing something?
you can do it by going into call history and pressing and holding with the stylus on the number you want to save.
J
And what to do if I want to add the number to an existing contact?
Is there a solution?
Thanks in advance for the answer,
Uros
Think you are stuck unless there is some third party software that can do it.
Hi all,
@Urosh:
Just create a new contact the way junglejim discribed, open this new contact, mark the number, press and hold pen, copy the phone number to the other contact. Thats all. Without using a paper to write the number down.
Perhaps it is a long way to get there, but it works.
Greetings, Kaputter :shock:
How about; press-and-hold, then select 'send sms', then copy from 'to' field into your existing contact.
Still a bit long, but getting there!
hi
I want to add a number from Call History to one of my existing contacts (i.e, add to home telephone of an existing contact)
However, when hold and tap number in Call History, it open a new contact instead of letting us choose an existing contact
Any program that can let us do that
My device is O2 XDA IIi
Thanks
Tuan
There isn't any way around this, though maybe there will be in WM2005 or through a third party program.
It's something that annoys me, too. The way round it is to get it up as a New contact, then copy the number and cancel saving the contact, go to the correct contact and add it that way.
Bit long winded, but other than writing it down by hand or remembering it I don't think there's any other way.
Cheers
Ant
Hey Guys..
Simple trick....
Tap and hold the number in the call history
Then select option "Send Text Message"
Then copy/cut that Number and paste in the contacts
Then cancel the message
I hope, this sounds OK
In my contacts I have a mobilephonenumber and want to enter a second mobile number.
I want if I create an new textmessage charge a in the field: having two mobilenumbers for selecting without having to lay out the contact twice.
Maybe, the second idea ist to allow a textmassage to a landlinenumber…..
Fact is....if I create a new massage, write into the field: TO...there is just showing the mobilenumber....and just ONE.....
Do you have any ideas…Thanks a lot.
Greetings
sonox
I have a small problem with the touch pro..
in my contacts i have several contacts with the same first name but different last names.
in my TyTnII, when writing an SMS or email, in the to: space i used to write the first two characters of the first name, space then one or two of the last name then i usually get the required contact.
in teh Touch pro, it's different, i write the two letters from the first name, it doesn't show all the contacts with the same first name.
when i put space it chooses the name displayed, it doesn't give me the chance to enter the second name.
this is really irritating me.
do you have a solution for this?
You know that you can use the arrows on either side of the one it finds first so you can scroll through the rest, right?
Not quite what you're wanting, but you didn't mention it, so, just in case!
this is exactly what I'm doing, but it doesn't show all the contacts...
that's why i have to find a way to enter the second name.
start typing with th last name, not the first.
this works for me
hmmm...
starting by second name was OK for some names, but it does no good when there's a contact who's first name is the same like another contact's second name.... (seems complex now)
it directly chooses the first one!!
i guess if someone has the CAB file for the messaging software same as TyTnII, it would be the ultimate solution for me.
can anyone help please?
Maybe I'm naive and unknowledgable on this, but wouldn't something like this be something to put forward to HTC support? They most likely will not solve it for you right away, but at least they would have a record of this being an issue and might rethink the software and give the user an option between which selection method is used.
If you tap on the "To:" it brings up the contacts app and you can browse for and select your intended recipient from there.
Hope that helps
I accidentally discovered a solution!!
after writing the first couple of letters of the first name, then CTRL+SPACE, then the first letters of the last name....
CTLR was the trick... as SPACE alone would choose the first displayed name.
thanks all for helping.
I have contacts with the same format as yours. I usually type the first two or three letters of the first name, then use the down arrow on the QWERTY. I haven't tried the virtual keyboard yet, but sure the D-pad would work in the same fashion.
FYI for those with similiar issues. It does only reflect one name at a time, but does let you scroll the contact list.
How can you specify which Name should be displayed when linking contacts in WP7?
According to MS this should be possible (see ***.microsoft.com/windowsphone/en-us/howto/wp7/people/link-two-or-more-contacts.aspx)
"When you link two or more contact cards that have different profile pictures or names, you can choose which picture and name will represent the whole. To learn how, see Add a picture to a contact."
But there is only a description for the contact picture, not for the names...
Does anybody know how to do that?
Cheers
Meinrad
mjeanrichard said:
How can you specify which Name should be displayed when linking contacts in WP7?
According to MS this should be possible (see ***.microsoft.com/windowsphone/en-us/howto/wp7/people/link-two-or-more-contacts.aspx)
"When you link two or more contact cards that have different profile pictures or names, you can choose which picture and name will represent the whole. To learn how, see Add a picture to a contact."
But there is only a description for the contact picture, not for the names...
Does anybody know how to do that?
Cheers
Meinrad
Click to expand...
Click to collapse
Open the desired contact and then tap "edit" in the bottom bar. Right beneath the profile picture you'll find "name". Tapping that opens a form where you can enter first name, last name etc. That name will be displayed in your contacts hub according to the settings you made for how your contacts are shown (last name first and so on).
Thanks for your reply, but i doesen't quite answer my question. I know that I can edit this information, but thats not what i want.
I'll try to be a bit more specific:
I have a Windows Live contact with the name 'abcd' and an Outlook contact with the name 'Aaaa, Bbb'. On my phone i linked these two contacts (since they represent the same real person). But my phone always uses the name from the Live contact. When I edit the image, i can choose if i want the image from the Live account or from the Outlook contact (and from what i understand from the MS doc this should be possible for the name as well).
-> the only workaround I found so far, is to delete the name entry form the live contact. (Contact -> edit -> edit Windows Live -> delete)
Can't test it right now (on a different phone) but it depends on what linked profile comes first.
For example I link a Live and Facebook contact and to show the Live name, it needs to be the first one... if any of that made sense.
Sent from XDA App
Yeah,... I know what you mean, but the live contact is always the first in the list. It doesn't matter if I select the Outlook contact first and then add a link to the Live contact or the other way round.
Can you reorder them?
Something not quite right linking contacts.
Linking contacts seems only half implemented.Ive also had this problem,renaming the linked contact card only works sometimes, but always renames the first linked contact, I dont wont that.Also there does nt seem to be any logic to which name it chooses for the card.I ve stopped linking contacts anyway because in text messages you get several message threads from the same person with no idea of what number its from to text or call back ( if they have more than one mobile number ). Lastly I would like to be able to rename the catergory of the number ( Mobile,Company, etc ).Because I would like moblie 2 or Work Moblie.I Hated having to look at the phone numbers all the time to decide which one is right to use.
Call Mobile
**********
Call Mobile
**********
Call Mobile
**********
Text Mobile
**********
Text Mobile
**********
Text Mobile
**********
mjeanrichard said:
Yeah,... I know what you mean, but the live contact is always the first in the list. It doesn't matter if I select the Outlook contact first and then add a link to the Live contact or the other way round.
Can you reorder them?
Click to expand...
Click to collapse
Sorry if I can't see it on my WP7 device atm, but I do remember being able to use the Facebook profile first and the Live profile came second.... have ya tried open Outlook contact, press link and then chose the Live contact ?
im not quite sure what u mean but here goes:
if you have 2 contacts. One is named ABC and the other one is AB. If you want to link them both but keep the ABC name, then you need to go to ABC and link it with AB.
Similarly if you want to keep the AB name, then u need to go to AB and link it with ABC.
ammarmalik said:
im not quite sure what u mean but here goes:
if you have 2 contacts. One is named ABC and the other one is AB. If you want to link them both but keep the ABC name, then you need to go to ABC and link it with AB.
Similarly if you want to keep the AB name, then u need to go to AB and link it with ABC.
Click to expand...
Click to collapse
Unfortunatley that method dos nt work for me
I have the same problem, I want to view my contacts by the facebook name and I can't... :/