Is there a SW available on the XDA II that allows me to send a SMS msg to a group? I used to be available to do it on my ipaq using simple SMS.
I select category say "personal" from my contacts and viola, the msg will be sent.
AFAIK you can either select multiple recipients from you contacts list or you could set up a contact named "my-group" or so and put all the phone numbers in the mobile field, seperated by semicolons. It works here, but I have not yet tried more than a dozen at once.
Martin
martin kopplow said:
AFAIK you can either select multiple recipients from you contacts list or you could set up a contact named "my-group" or so and put all the phone numbers in the mobile field, seperated by semicolons. It works here, but I have not yet tried more than a dozen at once.
Martin
Click to expand...
Click to collapse
How did you do it Martin? I created a new contact and put multiple of mobile phone numbers saparated by semicolons, but the semicolons don't appear on the SMS program. In other words, the SMS program removes all semicolons and appends all the numbers.
tried this, but when i send a message I get the error:
"You cannot send this message as both an SMS and an e-mail message. Please remove either the SMS or the e-mail address and send again"
Needless to say, I created a new contact with two telephone numbers in the mobile phone section seperated with one ;
Ashby
group sms
hi guys
i tried to do this as well but it didnt work i had a nokia comunicator and i was able to do this with no problems.
regards kevin b :lol:
Thanks guys for the replies. I guess I have to live with sending SMS messages manually
It is really strange that an expensive pda+phone with a powerful operating system doesn't have this simple functionality.
I might sound strange, but this function is very important to me coz I send an average of 8 SMS messages to a group of people on daily basis.
I miss my T610
gropu sms
i agree kufi these phones arent cheap.
when i do into my sms box and say new i can add more contacts and seperate them with ; without any problem
havent tried sending it though so i'm not sure if it would fail but i can add more then one contact thats for sure
Yes this is how I do it too; the manual way which is time consuming and annoying. The optimal way is to assign a group of contacts under one name, but as you can see, it is not possible.
Hoping an application will be avaialable soon, coz this is driving me crazy.
group sms
I got this software, I think it works great. you have to first creat a group list, when saving the number, you have to save it in the group. I don't have any link for it, but its group sms ver1.1 by shailesh ashar, google it, or find the cab laying around here. hope it helped.
http://www.shubaroo.com/index.php?module=group_sms
Did you search?
http://www.google.com/cse?cx=000825...p+sms&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
^ search for "group sms", see first hit
please help me....
i am using O2 XDA Flame model, i need to know if there is any application for forwarding sms from inbox to group contacts by selecting the group name. i have used software for sending new sms to group contacts but have not seen any application helping to forward inbox sms to group contacts... hope i have clearly mentioned my query.
thank you.
If you are sending the same group of people text messages I send the message in the normal way - this requires you adding each of the recipients one at a time.
When you are finished and you send the mail - go back into your messages and select the 'sent' option form the drop down. You can now highlight the recipients and use the 'copy' option.
Then, go to the 'NOTES' section of your XDA and paste in the list and save it using whatever title you want.
Every time you want to send a message to these recipients, open your 'NOTES' and copy/paste the list into your message - it is not perfect...but it does work and does save time.
I have only just joined the forum. Anyone still having problems sending texts to multiple contacts on you htc tp2 try this I think it may help you.
Create a new contact any name and type the contacts numbers in as laid out below.
12345678999>; <12345678999>; <12345678999>; and so on. You need six spaces between each number, no left side arrow in front of the first number as the phone puts that in by default and no right side arrow after the last number. I have tried it with upto ten numbers no probs it might work with more.
Also if if one of the contacts in your group sent you the original message you wont wanna send it back to him so if you hit menu then hit check names hey presto it will put all the contact names in relevant to the numbers, touch on the one you want to delete and then hit your back space key and its gone. Good luck.
chk out my signature for group sms app that I made
Say a person that is not in my contact list calls me on my XDA, although I can see the number in the phone application, I cannot just copy it or easily create a new contact using the number unless I write it down on paper first, a bit of an oversight by MS or am I missing something?
you can do it by going into call history and pressing and holding with the stylus on the number you want to save.
J
And what to do if I want to add the number to an existing contact?
Is there a solution?
Thanks in advance for the answer,
Uros
Think you are stuck unless there is some third party software that can do it.
Hi all,
@Urosh:
Just create a new contact the way junglejim discribed, open this new contact, mark the number, press and hold pen, copy the phone number to the other contact. Thats all. Without using a paper to write the number down.
Perhaps it is a long way to get there, but it works.
Greetings, Kaputter :shock:
How about; press-and-hold, then select 'send sms', then copy from 'to' field into your existing contact.
Still a bit long, but getting there!
Hi all, when I receive a phone call from an unknown number, I can open the
context menu for this call in my call history and create a new contact with this
new number. But is it possible to add this new number to an already
stored contact, like it is possible with Symbian devices?
Greetings and TIA, Matthias
Select "Send text message" from context menu then copy the number at "To:" box. Open new contact then paste the number from clipboard.
no "out of the box" solution, without clipboard?
since i was using the SEP900, it was very easy for me to that, but now i have to do it like the mentioned way.
i couldn't find a dirct way to do it.
too bad, but thx anyway!
Hey guys,
I was wondering if its possible to add a sms button next to the little phone button below a contact in the "Peoples" Tab in TF3D...???
It would be great not to tap the contact and have the Microsoft contact window popup and then do "send text message"...
When you add a contact to that page, you can select the "Send a text..." from the contact's lists instead of their cell/work/home #. It will then take you to the SMS composer when you tap the line under their picture.
Unfortunately, you can't have more than 1 of any contact in there, so you can't have one for calling and one for texting. Hopefully someone will find a way to extend the functionality a bit more... maybe the next TF3D revision?
Is there an easy way to add a new contact from a txt? What I mean is, say you get a txt from someone not in your contacts. Instead of their name, their number shows up. Is there a way to make a new contact with them without have to write the number down and adding it manually?
MANTI5 said:
Is there an easy way to add a new contact from a txt? What I mean is, say you get a txt from someone not in your contacts. Instead of their name, their number shows up. Is there a way to make a new contact with them without have to write the number down and adding it manually?
Click to expand...
Click to collapse
don't think so...you have to copy it and then paste into the dialer and then save to contacts
When your in the txt message, press menu key and then you'll get the option add to person, and then make a new contact with that number. That is how it works with mine so it should work on yours to.
short press on the message from the number that isn't in your contacts, then select add contact.