HI There
(first XDA, with last upgrade from o2 site)
I am in UK, on O2 and have several pop3 accounts configured
I am wanting to keep GPRS connected whilst i check each account
but after checking one account it disconnects, and I have to redial as I move through each individual account
Where is the setting to Keep my XDA GPRS connected as I cycle through each pop3 account?.
Also anyone know of a better pop3 email software which handles better than the one it comes with?
Thanks
Re: How do I keep GPRS connected
Helou, in registry change or add the key [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ConnMgr\Planner\Settings]
"SuspendResume"="~GPRS!"
Georg
Georg,
How do you get into the registry to do this? Do you have to do a hard reset in conjunction with this?
gratefuled said:
Georg,
How do you get into the registry to do this? Do you have to do a hard reset in conjunction with this?
Click to expand...
Click to collapse
No hard reset - only on/off radio
Georg,
This is un-chartered waters for me. I could easily wreck the ship.
I downloaded the file and unzipped it. Now what do I do?
If you feel that only someone with good technical ability should try this approach please tell me. Otherwise I could try the hard reset approach suggested by others in another thread. I understand that one, but this approach I do not. I'm an Engineer, but I fix buildings and structures not PPCs.
What I do like about your fix is that it sounds as if I will not have to reload all my applications after I complete the tasks, and this is attractive to me.
What do I do with your download? How do I set radio on/off? Could you provide me detailed instructions? Sorry if this is a bother, and if I'm being unreasonable just let me know.
Ed
gratefuled said:
Georg,
This is un-chartered waters for me. I could easily wreck the ship.
I downloaded the file and unzipped it. Now what do I do?
If you feel that only someone with good technical ability should try this approach please tell me. Otherwise I could try the hard reset approach suggested by others in another thread. I understand that one, but this approach I do not. I'm an Engineer, but I fix buildings and structures not PPCs.
What I do like about your fix is that it sounds as if I will not have to reload all my applications after I complete the tasks, and this is attractive to me.
What do I do with your download? How do I set radio on/off? Could you provide me detailed instructions? Sorry if this is a bother, and if I'm being unreasonable just let me know.
Ed
Click to expand...
Click to collapse
Sorry, my english is poor for this.
What language do you speak?
gratefuled said:
What language do you speak?
Click to expand...
Click to collapse
Czech language.
Thanks - but what does this do?
HI There
Thanks for your reply/help!
But how does this "fix" work (ie, what will it do once I have installed it)
is it a design fault on the XDA the fact that GPRS won't disconnect?
Thanks
Re: Thanks - but what does this do?
davidandrews said:
HI There
Thanks for your reply/help!
But how does this "fix" work (ie, what will it do once I have installed it)
is it a design fault on the XDA the fact that GPRS won't disconnect?
Thanks
Click to expand...
Click to collapse
Is it quality setting, it is not error.
XDA1 always be GPRS up
XDA2 is only sometimes GPRS up (according to operator)
Here be more accurate setting.
( Englishment by the help of PC Translator )
More accurately setting succeed
When
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ConnMgr\Planner\Settings] "SuspendResume"="~GPRS!"
Then
[HKEY_LOCAL_MACHINE\ControlPanel\Phone]
"Flags2"=dword:00000000 = no button disconect in buble con.
"Flags2"=dword:00000008 = button disconect on buble con.
"Flags2"=dword:00000010 = button disconect and time con. on buble conection (hex)
[HKEY_CURRENT_USER\ControlPanel\PhoneExtendFunction]
"NoGPRSAutoAttach"=dword:00000001 = search GPRS on con.
"NoGPRSAutoAttach"=dword:00000000 = search GPRS on radio on
Georg
David,
What ROM are you using on your device?
gratefuled said:
David,
What ROM are you using on your device?
Click to expand...
Click to collapse
1.60.00 WWE ROM
1.60.21 Extended_ROM
1.06.01 Radio_ROM
PH10 Qtek
Georg,
I have everything you list except my ExtROM is 1.60.06.
I know that Georg has a language barrier with these postings.
Is there any one else out there that can explain this fix to me in full English? I do not know what Georg's dowload is for or how to get into the radio to do what he is suggesting.
Ed
Small GPRS applet
http://forum.xda-developers.com/viewtopic.php?p=27147#27147
Related
I wasnt able to work with Nicetrack and found that the link to their site is dead.
Is there any other software that works similarly to nicetrack on WM6.
Im on nfrazz62a ROM.with Radio ROM 02.47.11
maybe you can fill us in on exactly what nicetrack does, because this is the first time ive seen or heard of it and maybe for others as well.
Hi mdajunkie,
Its a software which gives us the information about the signal strength in dBm.
well I know you asked for something similar and the only thing that I could think of that has something similar or close to what you might need is batterystatus. That gives you a percentage on how strong your signal is, also does a few other very useful tricks. I wish I could leave you with a link or something to download and try but unfortunately im not at home, otherwise I post it for you. hate to say it but use the search for batterystatus or hopefully someone else has some better input than I could give.
Here is batterystatus
Hi Binder
Thanks for the link.....
And thankyou mdajunkie for the info...
I will try this out and will post back.
Emm,
Nothin upto Nice track.
That was really perfect !
You can download nice track still
I downloaded nice track 8/14 here. I agree that nothing matched nicetrack for maintaining a database of signal strength, cell towers, and even locations when it is hooked up with GPS. However, I have met nothing but failure in trying to get it to work on WM6 - It needs to know the COM port for GSM, and none of the available ones work - either no signal, or it locks the application. Because I really need it in the current cell-strength purgatory I find myself, I might be going back to WM5 if I can't bumble my way through it.
The author released the source code (waaaay beyond my skills) at the same website.
PLEASE let me know if anyone gets it working on WM6. I am currently running Jaguar2 on a wizard.
THANKS.
Please, could anyone send me a copy of the Nicetrack 1.6 sources (binaries would be fine too but I need the source) ?The website is down...
At the moment the site is up to work
Look http://www.nicecuppa.net/
Anyone has any news? I need of a Nicetrack for HTC Touch Pro. Or exist the similar software ?
+ 1
but NiceTrack.exe didnt see Cell ID's on my Qtek S100 wm2003..
iRiKi said:
+ 1
but NiceTrack.exe didnt see Cell ID's on my Qtek S100 wm2003..
Click to expand...
Click to collapse
Try binary from
http://piotr.trzcionkowski.pl/programy/poket/nicetrack.html
It has also support for WM5, WM6
KonikBujany said:
Try binary from
http://piotr.trzcionkowski.pl/programy/poket/nicetrack.html
It has also support for WM5, WM6
Click to expand...
Click to collapse
I tried from my HTC Touch Pro and does not work. The software has a lower resolution and can not read anything.
Any ideea ? Thank you very much
Hi guys. Has anyone found a working version yet?
Cheers
KonikBujany said:
Try binary from
http://piotr.trzcionkowski.pl/programy/poket/nicetrack.html
It has also support for WM5, WM6
Click to expand...
Click to collapse
YES! it is working on my Qtek S100 with wm2003se !!! very nice m8
BUT i can't get it to work with wm6.1 well, the 2008 versions that site actually *WORK* (you can see the cells already being detected) but it has a small resolution. Versions from 2006 have correct resolution, but don't work at all. I'll try contacting the developer, as i don't have any coding skills whatsoever
PS: i tried the batterystatus today plug-in from previous page, but it reveals to be a huge battery hog (at least for me). the constant refreshing of data probably is to blame.
KonikBujany said:
Try binary from
http://piotr.trzcionkowski.pl/programy/poket/nicetrack.html
It has also support for WM5, WM6
Click to expand...
Click to collapse
Do you know how to contact the author? Maybe he is registered to xda...
I have a motorola q9h smartphone and nicetrack doesn't start because of an useless error i've already seen that is related to the smartphone/ppc little differences... If i could look at his source code....
well i tried emailing him, but the form on his site doesnt work.
also, for wm6.1 i now use rk-Location Switch, while nicetrack continues to work flawlessly in wm2003
iRiKi,
1 i now use rk-Location Switch
What program is that ?
http://forum.xda-developers.com/showthread.php?t=328114
Hi everyone
Does anyone have the NetworkWizard.cab for WM6? Please post it here if you do.
thank you.
UP~
shencn said:
UP~
Click to expand...
Click to collapse
@shencn: DONT POST IF YOU HAVE DAMN NOTHING TO CONTRIBUTE!!!
IT ONLY MAKE YOU LOOK STUPID!
Hey, leave the guy alone. Any member of our online society can contribute by doing what it knows better. There's a jester in every kingdom! Human stupidity sometimes can be really helpful, for example it uncovered a lost thread about Network Wizard.
By the way, what's that Network Wizard you're asking for? I've never heard of it!
@NitroGenious
thanks responding. I read in the Htc's WM6 documentation. Its meant for Carrier settings.
Did you try this little app I've posted last week? http://forum.xda-developers.com/showthread.php?t=340586
@Nitrogenious
I just tried yours and it works fine. Attached is the original package from Htc which works to a certain extend. I have to tweak by 'hand' some parameters to make mms/gprs to work.
Using the relevant carrier settings from your cab, I copied to my DataConnection cab. It works without any 'hand' tweaking necessary.
To use my cab, extract to main memory and run from there.
Thanks a lot.
PS Have you tried SmarttoolKit http://www.e-natives.com/download/id/25/SmartToolkit_1_0_0_RC07.html?
illi said:
PS Have you tried SmarttoolKit http://www.e-natives.com/download/id/25/SmartToolkit_1_0_0_RC07.html?
Click to expand...
Click to collapse
Who hasn't?
my reason for asking is that you may omit softwares such as ClockOnTop in your future ROM releases.
Thank you.
Hello!
After reading and reading the Wiki for flashing the ROM to my Tytn II, I think I am ready. I still have a few questions ...
I have chosen to use the MicroSD card route as that seems easier to me. I just bought my Tytn a couple of days ago so I have the WM6 Professional CE-OS 5.2.1620 Build 18125.0.4.2 ROM version 1.56.413.2 Radio Version 1.27.12.11 running. It is in Swedish and I want the language to be in English. Do I have to downgrade first in order to be able to flash the WWE version ... in effect flashing twice?
Also, when I dowload and rename the ROM image I want, do I put the whole thing on the formated MicroSD card?
I have never synced my phone with my PC so that shouldn't be a problem right?
Thanks for the help!
Scarlet
Hi Scarlet,
Without actually answering any of your questions (sorry...), just a comment: with a Swedish TyTN II you have a Swedish keyboard also, don't you? I'm not 100 percent sure that the WWE ROM supports the Swedish keyboard layout so once you finished flashing you will have to expect issues with this...
abubasim said:
Hi Scarlet,
Without actually answering any of your questions (sorry...), just a comment: with a Swedish TyTN II you have a Swedish keyboard also, don't you? I'm not 100 percent sure that the WWE ROM supports the Swedish keyboard layout so once you finished flashing you will have to expect issues with this...
Click to expand...
Click to collapse
Hi Abubasim!
You are correct, my keyboard does have åäö swedish characters. I was thinking I could flash the WWE ROM and then use the Swedish CAB to fix the keyboard mapping ... eller hur?
Jag är inte saker. Förstår du vad jag menar?
Scarlet
Hej Scarlet,
Although I haven't tried it myself, it sounds like worth a try. Check with other Swedes (or Turnips ) in this forum or maybe even other TyTN II owners back home there in Sweden.
Yes, I understand "jag är inte saker", means literally "I am not things" if you skipped the umlaut over the a in saker on purpose (Jag är finsk själv, men med svenskt medborgarskap.)
abubasim said:
Hej Scarlet,
Although I haven't tried it myself, it sounds like worth a try. Check with other Swedes (or Turnips ) in this forum or maybe even other TyTN II owners back home there in Sweden.
Yes, I understand "jag är inte saker", means literally "I am not things" if you skipped the umlaut over the a in saker on purpose (Jag är finsk själv, men med svenskt medborgarskap.)
Click to expand...
Click to collapse
Good morning!
I have written to a couple of swedes, but no help there ... boooo!
No you caught me, I missed an umlaut ... swedish is my second language, I am originally from sunny southern california .
I think I am going to go for it on my own. I have had this phone burning a whole in my pocket for days and I can't stand it!
Wish me luck!
Yes, good luck to you. Be careful and read the updating threads and the Wiki thoroughly before attempting. I messed up my previous phone, the i-mate JASJAM when attempting ROM flashing by using a microSD card (the phone crashed in the middle of the update and became a brick but luckily I got it repaired under warranty[!]) so I will not try this path with my new TyTN II until I see real benefit worth the risk.
BTW, you have the best profile photo I have seen on this site. Is that you?
I hear you. I gave up on the MicroSD method and am now trying to use the Kaiser CustomRUU to extract and install the nbh file. I think there is something wrong with the NBH file I am trying to you (or i did something wrong ). Either way, I downloaded it and put it in the same folder as the KaiserCustomRUU program but i get a file error once I run the utility?? I am looking for a new file now to try!
Yes, that is me ... thanks for the nice words. I seem to be the only chick around that is way to into technology and cell phones ... I'm always attempting some type of shananigans ....
I sent you a PM by the way!
Vi hörs
Scarlet
Re: SD Flash
Personally I'd recommend just using the USB flash method since that's what the vast majority of us use without flaw. The overriding important thing would be to make sure you install HardSPLv1 (available from the stickies in Kaiser Upgrading) to keep from bricking your device should the flash fail for any reason.
As for the keyboard, a cab file, or Schaps Advanced Config v1.1, or a registry edit will work just fine. What you'll end up with after one of those three is your English device with a keyboard that inputs exactly what you see (Swedish characters too).
The one downside to this is the word completion...when you switch the keyboard's language you'll have to also install that languages' dictionary for word completion to work, and in your case that would mean Swedish word completion. Although It may be possible to link the English dictionary? I never tried it myself with the German Hermes I had...
-Q
Thanks so much for the suggestions guys! I FINALLY FIGURED IT OUT AND GOT IT GOING!!!! Turns out I didn't unpack the ROM rar file first. I just downloaded and renamed it ... duh! Once i figured out to *unzip* the rar file using WinRAR, then I found the right file, renamed it and used the CustomRUU deal. ROM was changed along with the language in about 10 minutes. I used the CAB file also to fix my keyboard to still give me the right mapping for the swedish keyboard! I have been working on this phone for 2 LOOOONNG days and I finally figured it out.
Now I have to figure out why my internet is not working ... I'm trying to download my one free map from TOMTOM and i'm getting no love! I'll get it ... more reading to do!
Thanks so much for the support ...
Hugs and kisses!
Scarlet
RE: Internet
SVIK73 said:
...
Now I have to figure out why my internet is not working ... I'm trying to download my one free map from TOMTOM and i'm getting no love! I'll get it ... more reading to do!
Click to expand...
Click to collapse
Depending on what ROM you used its likely your settings are not proper for your provider (or do not exist at all). Personally I prefer the latter since all the "automatic" T-Mobile configurations only use the slow APN.
I recommend searching for settings for your provider and inputting them as necessary. Unless you're talking about Wi-Fi in which case you'll probably have to go under connection settings and specify that your network card connects to "The Internet" (it defaults to Work).
-Q
Quentin- said:
Depending on what ROM you used its likely your settings are not proper for your provider (or do not exist at all). Personally I prefer the latter since all the "automatic" T-Mobile configurations only use the slow APN.
I recommend searching for settings for your provider and inputting them as necessary. Unless you're talking about Wi-Fi in which case you'll probably have to go under connection settings and specify that your network card connects to "The Internet" (it defaults to Work).
-Q
Click to expand...
Click to collapse
Thanks for the tip Quentin! I got the internet going now. My next project is my email ... i used IMAP before with push software, but looks like that is not available. I'm reading .... Are you guys using windows live to have push email functionality or just setting the phone to check every so often?
Scarlet
Having Similar Problems Changing Lang from German to English
Good Evening,
I am New and Not Certain if this is venue to pose a question regarding how and where the Information regarding the Link or ?? Change My Language on my Branded HTC TyTN II (Kaiser 130 ) from German to English. The Telephone is Swiss German and I do Not Read, Speak nor Understand the Language. I was however able to Unlock the Sim in the First Stage and then do a Hard Spl V1 and everything is Excellent. But now I am having a Delima in finding a reference point to change the German to English language. Would you direct me to where I am able to go regarding the Flash Rom in English.
Thank you in advance for your assistance in this matter.
You may send me an Email at [email protected] regarding the Info.
Have a Happy New Year !!
frenchgq said:
Good Evening,
I am New and Not Certain if this is venue to pose a question regarding how and where the Information regarding the Link or ?? Change My Language on my Branded HTC TyTN II (Kaiser 130 ) from German to English. The Telephone is Swiss German and I do Not Read, Speak nor Understand the Language. I was however able to Unlock the Sim in the First Stage and then do a Hard Spl V1 and everything is Excellent. But now I am having a Delima in finding a reference point to change the German to English language. Would you direct me to where I am able to go regarding the Flash Rom in English.
Thank you in advance for your assistance in this matter.
You may send me an Email at [email protected] regarding the Info.
Have a Happy New Year !!
Click to expand...
Click to collapse
Sorry, I didn't read all of your post - you've already got HardSPL but I'll leave the info in to helps anyone else if they need it..
Possibly not the correct place to post the question, but it was so politely written I can't resist answering
Most of the roms cooked in this forum are in English language (maybe all of them except some versions of Schaps). For someone new who wants a good stable rom without having to do too many customisations I'd recommend the full versions of Dutty's latest, Schaps 4.30 or Sleuth.
Don't forget to hard SPL before you flash any ROMS and also check which radio will work with which rom here. If you get stuck with HardSPL, DO NOT flash any roms until you get this sorted (rom flashing is easier than HardSPL).
Most importantly, READ, READ and READ again before trying anything until you become more familiar. Start with the WIKI which is the root of all knowledge.
Oh yes, welcome to the forum
Hi Everyone
I'm looking for a program that could tell me the Cell ID information for the tower that I'm connecting to.
Does anyone know of such an app?
Hi Pieter.
There are several windows mobile apps that can determine the cell ID info, but none of them seems to work on our Universal...
Phonealarm
Phonealarm is a phone suite program that gives the numeric number of the cell tower and lets you create a name for the tower.
Harry Tuttle said:
Phonealarm is a phone suite program that gives the numeric number of the cell tower and lets you create a name for the tower.
Click to expand...
Click to collapse
Thanks ... will search for it.
Try this....
There's a program called CellProfiler. I've previously used it and it's really comprehensive when it reports nearby Cell Towers.
Give it a try, and see.
tansoftware said:
There's a program called CellProfiler. I've previously used it and it's really comprehensive when it reports nearby Cell Towers.
Give it a try, and see.
Click to expand...
Click to collapse
Thanks looking for it right now.
Pieter,
If you find anything that actually works on our Universal, please let us know!!
Well, CellProfiler should theoretically work. Too bad the forum seems to be hacked, and it's not free
None of them so far works properley on the Universal but I'm still looking.
I guess you need a special rilgsm.dll - as with the HTC Fieldtest-tool. Search the forum ...
Cheers,
-mARKUS
HTC FieldTest?
What can you tell us about it? That is BOUND to work on Uni, or to be easily adaptable!
See the attached file. Launch it on your device and you'll see that most of the information is missing. I'm not sure whether there is a patched rilgsm.dll for Uni available somewhere....
Cheers,
-mARKUS
mbirth said:
I guess you need a special rilgsm.dll - as with the HTC Fieldtest-tool. Search the forum ...
Cheers,
-mARKUS
Click to expand...
Click to collapse
Will start playing with it now to see what we can do with it.
I don't know if you noticed, but BeastyLeo's amalgam ROM uses the Radio service of the HTC Himalayan. And I can't find the rilgsm.dll you've been talking about, is it in the Windows directory, or somewhere deeper?
mzalan said:
I don't know if you noticed, but BeastyLeo's amalgam ROM uses the Radio service of the HTC Himalayan. And I can't find the rilgsm.dll you've been talking about, is it in the Windows directory, or somewhere deeper?
Click to expand...
Click to collapse
In the Windows directory but you must use Total Commander to see it.
Oh, okay. I was using the ActiveSync explorer. I'll try to mod something into it soon...
Hi,
I'm not sure whether there is a patched rilgsm.dll for Uni available somewhere....
Click to expand...
Click to collapse
any news about extended rilgsm.dll???
What steps are necessary to patch it??
You got any hint what to use as a starting point?
Regards,
scholbert
I found it at http://www.mpx.gen.tr and I have been using it with no problems.
Windows Mobile 6.1 Powered by Adil YILDIZ:
Code:
[URL="http://rapidshare.com/files/138795484/G500_3_English_Adil_YILDIZ.200808.1958.rar"]http://rapidshare.com/files/138795484/G500_3_English_Adil_YILDIZ.200808.1958.rar[/URL]
It has:
Office 6.1
Windows Live Messenger
ClearTemp
Esmertec Java 3D 2008
MoBlue (for bluetooth connection)
Vito Audio Notes
GPRS Manager (for the problems of GPRS configuration)
TCPMP Player (supports many video/audio formats)
WM5torage (to access the flash memory when using a pc)
XnView
Picsel Viewer
Opera Browser
Slide Panel Theme
CeleTask Profile manager
CeleTask Task manager (very useful)
THANKS TO adilyildiz
AFTER INSTALLING IT YOU MAY WANT TO CONFIGURE SOME BASIC FEATURES (MMS,...)
http://www.toshiba-europe.com/mobil...te&WCE=&WCU=;LANG=1;PID=179;TYP=0;PNT=0;SEC=0
If you want to use other T9 (it only has turkish) you can install this cab
languages:
English
Spanish
French
Italian
German
Portuguese
Dutch
Czech
NOTE: manual as an attachment
is in the forum any rom for the toshiba g710 / vodafone vda gps ? sorry i cant read turkish!
sorry for my bad english!
thx a lot
reiga said:
sorry i cant read turkish! ...
thx a lot
Click to expand...
Click to collapse
Sorry, me neither
Nice!
I have tried other WM6.1 ROM, but there was problem with EDGE/GPRS radio, it was not connecting to the internet. I hope this one will be working. I will come with comments soon!
Good job! The gprs radio is working good, the connection to the internet is now possible.
The look of this ROM is nice, also it has suitable programs, so I have to say after some time: upgrade it, if you can!
GSM network
How can force GSM network, it only works with 3G, my operator is YOIGO from Spain.
Thank You
T9 polish
If someone need in enclosure dictionary is Polish T9
Just updated my g500 everything went pretty smooth and took only few minutes.. Phone works much much better and faster - that's really fantastic! GPRS, EDGE, BT OBEX and AD2P perform flawless, looks like this rom is really stable, thanks to adilyildiz and emilio666 for posting it here.
One question for those who also updated - do you have 3G network working fine?
thanks a lot, gonna try it!
GPRS % MMS for Yoigo (Spain)
Someone have parameters of configuration for them?
How can be changed between GPRS and 3G from Registry?
I've been using another WM6.1 ROM which let me change this setting from the Control Panel, but this one doesn't seem to have it.
Thanks in advance
ithecat25 said:
Someone have parameters of configuration for them?
Click to expand...
Click to collapse
Have you tried this?
http://www.toshiba-europe.com/mobil...te&WCE=&WCU=;LANG=1;PID=179;TYP=0;PNT=0;SEC=0
Please tell me if it works, I'm interested in this update but I don't wanna loose my settings!
I have problem I use this flash and I don't have Internet (GPRS) and MMS. I have configuration but this doesn't work.
I use network PLAY
Country: Poland
theopulus said:
How can be changed between GPRS and 3G from Registry?
I've been using another WM6.1 ROM which let me change this setting from the Control Panel, but this one doesn't seem to have it.
Thanks in advance
Click to expand...
Click to collapse
It doesn't have Mode change option in Phone Setting and looks like 3G won't work. I spent half day trying to find registry hack but no luck. There is another ROM from Darex (www.myg500.pl) where 3G works and bands can be changed.
lineus: Thanks a lot. Now I'm running Polish version (0.38a I think) and I think it's a bit better that the other one.
Anyway, GPRS and MMS is not possible for me. I'm using Spanish YOIGO. Even Toshiba assistant doesn't send me any configuration now (firmware maybe?)
theopulus said:
lineus: Thanks a lot. Now I'm running Polish version (0.38a I think) and I think it's a bit better that the other one.
Anyway, GPRS and MMS is not possible for me. I'm using Spanish YOIGO. Even Toshiba assistant doesn't send me any configuration now (firmware maybe?)
Click to expand...
Click to collapse
Could you please give me a direct link to this ROM? I can't read polish!
And please tell me if you know any other ROM's for this mobile (even WM5), I'm trying to make a backup of my original one from Yoigo.
Thanks!
Just bought this Smartphone to replace my beloved Tornado (SP5), and sucessfully updated to WM6.1 with this ROM.
Everything seems to be working perfectly, but I will need some more time to test everything out.
Good work and thanks for sharing!
kaamos said:
Could you please give me a direct link to this ROM? I can't read polish!
Click to expand...
Click to collapse
Here it is
http://g500.wdrozenia.net.pl/index.php?option=com_weblinks&view=category&id=34:g500-fw61&Itemid=48
Ok, after some hours of testing, I only found two problems with this WM6.1 ROM for the Toshiba G500:
-after running the integrated Windows Live Messenger for the first time, and activating the Home Screen tab, I noticed there are icons missing on this tab. Instead of those I'm getting a red cross picture.
-everytime I open a SMS, it appears slightly paged down, hiding the sent date and time information on top. I must press "Up" once to reveal this information.
Overall this seems a great ROM indeed, a must have for all G500 owners!
can someone tell me where i can find the password? my polish is ... not good