Database Info

XDA Exec and Tom Tom 5

Can anyone tell me how to install tom tom 5 to the xda exec? I copy the files direct to my sd card and it's supposed to auto install after re-installing the sd into the exec.The start up screen comes up and goes off - nothing else.Needless to say I've installed the same onto my xda II without any problems - any help appreciated.

WM5 + tomtom
Hi,
Tomtom is not compatible with WM2005, according to the tomtom site. they dont have any news on when it will be.
cheers
Paul

Thanx for the quick reply Paul, it saves me pulling any more of my hair out.Seems as always I should have waited until they ironed all the problems out.
Cheers mate!!

Search the forum, you can use TomTOm 5.1 with the XDA Exec apparently if you install the CABs to the Storage card. It has to be the update 5.1, V5 won't work at all.
HTH
Fin

Although they offer no support it does work but the standard installer will not work. The maps are really nice on the higher res screen.
You have to copy the CAB files to your SD card and run them manually. EG double click them.
You will need TomTom 5.1
The files you need are
ttn.cab
gps.cab
wzd.cab
PIMAddin.cab
I run them in that order. Then i use Checkpoint version 5 for the POI warnings like speedcameras etc.
My TomTom BT Receiver is found automatically but a friend has a third party BT Receivers and we had to mess about a lot to get it to work. There are instructions in another thread on here for that if you need it.

Again thanx to everyone for the info, in reading that I managed to get it up and running - what a vast improvement to the last version and with superior graphics.
Cheers for the help!!!

Tom Tom 5 with XDA Exec + Pharos igps
Dingo, you're right about 3rd party gps receivers. Can't seem to find any gps signal at all, when pairing the two it comes up with a question mark and the name of the receiver ( no question mark on the xda2).Is there drivers to download and if so where do you download them to or can you re-direct me to the site/post you're talking about. Thanx matey....

TT5 on WM5 5.10 install manual, activation probs on maps
HI,
Did as said but have problems once firin' up TT5.
It comes up blank with say Great Britain i choose, it asks for activation.
I entered on TT website but said not valid, neway around this ?
Thanks in advance,
Olly

LocationFree for PPC

Ok - I am looking for some way to run Sony's LocationFree on my PPC. There used to be a solution called NetFront LocationFree Player, but it is no longer being sold. Even the places that say they have it - don't.
Is there any other frontend software that I can use. I don't want to changes solutions completely (aka Slingbox or Orb) since I use my PSP heavily with this service.
Any help or advice would be greatly appreciated. (Or if you know where I can buy that software would work too!) Thanks!

Bump...
Im looking for this too, I just got a location free box. Anyone know how to get this working with ppc?
Thanks

Well you guys should checkout ORB.COM. Its easy, free!, and does everything.
It turns your PC into a server (location free) that just runs in the background.
works perfect on my tilt!

I need this too!
Anyone care to send me a copy? I'm having trouble finding this, legally or illegally ;-)
There has been a whole load of LFPK1s being sold off recently for £25/$20 by Staples USA and PC World/Currys in the UK, making it a bargain.
Thank you in advance. It's crazy of Sony not to offer this software anymore.

I'm also looking for a CAB of this...I've actually even emailed hadango, I'm hoping they'll eventually get back to me on this one.

I have Netfront Location Free Player
I am not sure if I can post it on the forum, or about it's legality. I don't see how it would be a problem since it apparently is abandonware now.
If I get the go ahead from XDA I would happily provide the cab.
EDIT: Attached zip of the cab file.

Hannigan174 said:
I am not sure if I can post it on the forum, or about it's legality. I don't see how it would be a problem since it apparently is abandonware now.
If I get the go ahead from XDA I would happily provide the cab.
Click to expand...
Click to collapse
the cab actually wont help because there is no way to get a serial. trust me on this. ive even emailed netfront/access about it. serials only work on one unit and no one who uses this is giving up their code.

Seggzy said:
Well you guys should checkout ORB.COM. Its easy, free!, and does everything.
It turns your PC into a server (location free) that just runs in the background.
works perfect on my tilt!
Click to expand...
Click to collapse
I'm a little confused. All the media that I want like pictures and videos, I can easily put right on my phone. The only reason I would want Orb would be to stream my cable tv. After spending the money on a decent tuner card, I could have just bought a Slingbox. What are the advantages of Orb?

any update on this?
i do not want to use orb as it means having my pc on all the time,
i would like to use my locationfree player as it works so well with my psp.
gutted if i cant use this

anyone have it to send me? i have bought it i just cant download it anywhere

Hi, I am interested in the cab for this abandonware software....plz. post a link to this cab. I purchased location free basestation 2 months ago.....i have htc touch pro and would like to put it to good use.
thanks

I attached a zip of the cab in Post 6 if anyone wants. I do not feel comfortable placing a registration key on the site, but if anyone needs one you can try to IM (please don't PM me, I rarely check it).

hi i'm intrested on this software and and i thank you for the NLFplayer cab
if you please can send me the serial key to [email protected] thank you

tom tom on td2

have a qeustion wil tomtom 6.030 work on touch diamond 2 because i have dis one all ready
i really hope its gonna work
tnx
hope somebody response

No, you'll need Tomtom 7, which you can get from this forum. Tomtom 7 does not work with your version 6 maps, so you'll have to purchase new maps. Yes it sucks. Also, you cannot move your Tomtom services, such as Traffic, over to your TD2. This is because Tomtom refuse to support the device.
Sorry for the bad news.
Personally, I'm so pissed off with Tomtom that I'm seriously considering using something else like IGo.

tom tom
yes i'am not gonna buy the tom tom 7 i'am really mad too
i have igo 8 also then i'm just gonna put that one on my td2
really tom tom sucks for not make tom tom 6 work on td2
thanks for your answer you really help me out
GRTZ

tomtom 6 with tt6 maps works fine on TD2, I had 6.75 working with all maps of europe.

Why work with tomtom6 when you can get tomtom7.9 with the latest 830 maps..??

hi, sorry for being a noob but....
I just installed tomtom 7 7.910.9185 VGA but it wont show an icon in my all programs' list.
the only way to run it is running it through file explorer. has anyone faced this problem too or is there a sollution to this?
thanks in advance

hinsen said:
hi, sorry for being a noob but....
I just installed tomtom 7 7.910.9185 VGA but it wont show an icon in my all programs' list.
the only way to run it is running it through file explorer. has anyone faced this problem too or is there a sollution to this?
thanks in advance
Click to expand...
Click to collapse
Sounds like a pirated version?

tomtom
Hey all! On my phone it is that version that works perfectly! If there are problems with the voices, simply copy the voices folder on your memory card!
http://rghost.ru/310020

I got ttn7.915.9196.vga_black_yarda working here perfectly with with Western-Europe 830.2307. It came in my All-programs list and i added it myself to the "today"-screen with comes with your HTC.

Hello
Where should I put the voices folder?
When I start the tt7 they ask me to add a new card, then I go directly on the website to choose the card I download it but then where should I install it ?
Thank you

Voices goes in the root directory of the SD card. Same as the maps directory.

Latest tt7 bought from tt on 4GB microSD does'nt install nor work
delfsegek said:
I got ttn7.915.9196.vga_black_yarda working here perfectly with with Western-Europe 830.2307. It came in my All-programs list and i added it myself to the "today"-screen with comes with your HTC.
Click to expand...
Click to collapse
How did you do it, man?
I bought the SD-Card TomTom 7 with Europe_1GB maps (825 built 2159) offered on TomTom's website since some weeks.
Neither install, manual install, TomTom Home nor something else works.
The extracted "TomTom Navigator.exe" and also the Home app 2.6 refused to support my O2 TDII device.
Then I installed 7.910.9185 black VGA, but I was only able to download one city map. My bought Europe maps are recogniced, but rejected when I select it through menu "maps change".
How can I make use of my Product code now? Or is there any chance at all?
Please help, or send me some hints by PM.

hinsen said:
hi, sorry for being a noob but....
I just installed tomtom 7 7.910.9185 VGA but it wont show an icon in my all programs' list.
the only way to run it is running it through file explorer. has anyone faced this problem too or is there a sollution to this?
thanks in advance
Click to expand...
Click to collapse
You have to make a shortcut to windows\startmenu\programs.
You can copy the file and paste it as a shortcut to the programs folder with explorer. If you don't like the name "Shortcut ..." you can rename the shortcut to whatever you like.
If you now look at your programs than you will see your shortcut. There is also the problem of the clipped voice. You can run any audio program except Media Player with a silent audio file, then the voice clipping is gone.
You can also search for the audio problem fix. Someone has made a cab file to fix al the problems in one installation.
http://forum.xda-developers.com/showthread.php?t=513621

Tomtom 6 'memory access violation' ideas wanted!
Had Tomtom 6 (fully legal) working fine on my Kaiser. On TD2/Topaz, whatever I do (soft,hard reset, load from different sources) I get the same 'Tomtom cannot start: memory access violation' msg. Internet search shows lots of people with same prob, but no answers or workarounds. Seems to me might be screen/display related as TT starts to load but with squashed format before hanging. Reluctant simply to buy TT7 in case a) that exhibits the same prob and TT specifically do not support the TD2/Topaz at the mo and b) some people seem to have got TT6 working fine on TD2.
Any ideas gratefully appreciated- might have to have a look at iGo as previous poster suggested, which is a shame as have used Tomtom since v2.
Thanks,
Tony

2tone said:
Had Tomtom 6 (fully legal) working fine on my Kaiser. On TD2/Topaz, whatever I do (soft,hard reset, load from different sources) I get the same 'Tomtom cannot start: memory access violation' msg. Internet search shows lots of people with same prob, but no answers or workarounds. Seems to me might be screen/display related as TT starts to load but with squashed format before hanging. Reluctant simply to buy TT7 in case a) that exhibits the same prob and TT specifically do not support the TD2/Topaz at the mo and b) some people seem to have got TT6 working fine on TD2.
Any ideas gratefully appreciated- might have to have a look at iGo as previous poster suggested, which is a shame as have used Tomtom since v2.
Thanks,
Tony
Click to expand...
Click to collapse
Although I haven't tried it myself I believe it is mainly a screen size issue, if you use the "WVGAFIX3_BY_Cotulla" http://forum.xda-developers.com/showthread.php?t=455974 and change the res TT6 will work.
If you try let us know how you get on.

WM6.5 and Avaya as dialler

Hi,
I am new on this portal but I read a lot in the last days and was very surprised of the solutions you find and also the apps you made working. Great
I know its not looking very good to ask as newbie for help but I hope you can help me... I am searching for more than a week for a solution and tried even to edit the registry but unfortunately I am not good enough to find the solution
So what do I want do to?
I have a HD2 (branding free) and I want to install Avaya One-X mobile.
Well the installation was succesfull and I also get it running inside my company and also the private modus. But since I have it installed I hear no ringtone. It always plays an "ding" and thats all.
So right now I always have to keep my eyes on my mobile to see if someone calls me or not.
And the second problem is that I also get no caller picture displayed..
But as soon as I deinstall the one-x everything is working (phone rings and caller picture is displayed)????
So you are my last hope to find a solution. Please can you help me?
If you need any further infos please let me know
Thanks
Frank
oh... the one-x mobile software is free for download on the avaya webiste
I can post you the link later (I am not allowed to post it right now...)

i'm getting mad with it...
Now I am a step further.. I now that the software deactivates the onboard call handler. I think it is only a registry setting to reenable it. after done the caller name+picture should be displayed and even the call-slider should be back.
Does someone have an idea where I can find the entry?

well now I know exactly the differents between the registry with one-x installed vs without. But I have no experiences in reading/interpreting my results.
Is a Dword something which can be used as name? or is it only a value?
Does someone has a guide for beginners please?

Did you contact Avaya support for assistance?

I have recently taken over all our telecoms at the office (avaya system)
Saw your post on One-x and been reading a little on it. Where did you get the install files from and did you get it working in the end?
I have a support contact with a company called central so I can contact them for free advice if needed

is this the version you are using?
http://support.avaya.com/css/appman...loads/P0438/5.2.x/C201012083328498084#summary
I'll take a look at what the installer does as I've not heard of it before but it's not letting me register to download it .

yep that's the software I am trying to download
Could not create an account either
I have emailed my support company and they will be sending the software to me on a disc.

thanks for your responses.
I installed the version for pocketpc WM6 (not the UC version) and yes it is working fine
But:
The problem I have is that since I have it installed it
- my mobile does not play a ringtone any more
- "slide to answer" and "show caller name+picture" is away

When I get the disc tomorrow ill post up the results.
This app will be very helpful if i get it working
As for the no ringtone issue I am not sure.

I would attach it... but i have no permissions...
@ fards: there are two versions. one for "Windows mobile 5"and the other one for "Windows mobile pocket pc" (here you can find it for WM6). the first is a UC versions. For this you need an internet connection and a uc-server running in your company. the other one is for normal mobile use. it calls via the phone connection the server and then your call is managed by the server.

support.avaya.com/css/appmanager/public/support/Downloads/P0483/C20090710162819340875658#files
you can find it here for free and you need no login

I do not see the HD2 listed as compatible device.
Did you get it working or still having problems?
How does the Avaya interface on the mobile phone look like?
Is it replacing the WM dialer completly or only while Avaya software is running in the background?

I have just installed it onto my HD2. The install hung at the end for about 20 mins. Reset device and the software has replaced my dialer. Appears to be working but im reading on how to configure the ini file now.
Tested on personal mode and call connected fine.

it replaces the dialer completly...
for the ini file you need the settings of your ACM. here you have to enter different extensions for each function...
you also has to to enter your mobile number in the ACM. Because your are identified via your number.
But can you test if you get a ringtone for incoming calls? thats my problem. I get no

Just to draw a conclusion to this This topic. This solution does not work correctly on HD2. Unless someone has managed to do this and has not shared?

sry... I was offline for a while... Does somesone find the solution?

No i gave up in the end..... bloody crap

Voip ?

Hi all !
I want to use a voip application in my touch2, however, it's seams this functionallity was banned by htc.
does anyone achieved to install and work with it?
I tried to follow a tutorial, but it disconnect my gps radio ...

Try nimbuzz, it supports sip too.

Yes,
It may supports, but I don't achieve to get it working on my touch2.
Is there any other alternative?

I take PortSIP, this app works well.
Look for the portsipcabwm6.cab. This one is perfect for our Touch2.
You can use with all standard SIP-Provider. I use SPARVOIP, they are very cheap (for short calls free of charge) in germany and some other countries.
There is also a checkbox and then die Main-Speaker is disabled.
So you get no "speaker-problem", that´s absolute great.
Only the contact-Button causes a problem.
It looks like a softwar shutdown, but after you quit the message it works.

I confirm PortSIP good working program. Sound is output on the headset, but not speaker.

try skype 2
I tryed skype and works well.

portsip help please.
hello everyone, this is my first time i write in a forum and i hope i am doing so in the right place. Moderator please move post if needed.
First of all hi to everyone and thank you for sharing your knowledge with me too, without knowing in the past few months you all have been very helpful to me.
I have now a little problem with portsip that is driving me insane.
I have a HTC touch 2 (t3333 / mega) and i had installed portsip for voipstunt using wifi, Everything was working fine until 2 days ago. I was able to make calls to landlines as well as to other voipstunt users.
2 days ago everything went wrong, after a full day of trying, i found out that i can now make calls to landline only for it to work fine.
When i try to call an other voipstunt user it rings normally, from the otherside they can pick the phonecall up, but my mic would be mute so they cant hear me.
i tried everything, unistall and reinstall portsip and even hard reset the htc, nothing worked, it is like portsip doesnt see the htc microfone anymore, but only when calling an othe sip user, when calling a landline everything is fine.
could somebody help me please, i feel like giving up, and also it is very frustrating as everything was working perfectly,and i was very happy with it,now i feel like getting rid of it.
thank you in advance for your help.
Gaeuk82

works great
http://forum.xda-developers.com/showthread.php?t=596682

Can I use voipcheap with PortSIP? How?

mcemeren said:
Try nimbuzz, it supports sip too.
Click to expand...
Click to collapse
I agree
nimbuz works with no problem on Touch 2 with sip feature< been making loads of calls via nimbuzz, alternativley there is a cab somehere native wm6.5 voip cab which works ok with schaps sipconfig tool but I dont recommend the wm6.5 cab as requires faffing around with dlls etc etc to get the codecs work on may sip providers etc etc. Nimbuz is very simple and works great if not you can always try fring I believe it has sip feature

rvrosa said:
Can I use voipcheap with PortSIP? How?
Click to expand...
Click to collapse
I use it with SJPhone, sjlabs.com/sjp.html and chose
SJphone CE .cab for Pocket PC 2003 v.1.60.303c, 10.26.05
Works fine and allows many other profiles and you can change between operators quickly.

fring
What about fring?
Does it work on wm 6.5?

Sorry to insist, but anyone knows if fring works on our device?

arseven said:
Sorry to insist, but anyone knows if fring works on our device?
Click to expand...
Click to collapse
yesssssss.....but Portsip is better, i suggest you to try it...
ciao

VOIP
I use a free application called Fring.
Works perfectly, easily configured and also works with ICQ etc

Where did you get skype 2 from. May i have a link plz. Ehen I tried downloading skype mobile for the HTC Touch2 windows mobile 6.5 the site said there isnt one available for the model- I have been trying for ages!!
Jatin