I need Thumb Keyboard driver for PPC 2003 - MDA II, XDA II, 2060 Accessories

Any boady can help me with this
Regards
Khalid

XDA II Thumbboard drivers for Targus ClickNType
If you modify the connector layout (to fix the physical pinout issues), then this driver works nicely on Pocket PC 2003 and the iMate / XDA II...
http://www.targus.com/us/Downloads/PA745v12.exe
I'm guessing that it may well work with a whole host of standard serial thumb-boards.
Give it a go.
Andy

Andy, do you know if this driver will work with the UK O2 version of the Thumb Keyboard (which is a Darfon G3B1)? If not do you know where that driver can be found

Thumb board
Should work fine - As long as the thumboard is serial and if from the same OEM - I'd give it a go.. Make sure you've got your data sync'ed - and try it!
A

Andy, Tried it but doesnt work. So does anybody out there have the driver and could email it to me?

I ended up returning my keyboard because I could not get drivers that would work at all and no drivers from HTC or OEM manufacturers!

These drivers work fine on the Darfon Keyboard I bought today for my XDAII. These are the UK drivers straight off of the cd supplied with the thumbpad
Download HERE
I am using them at the moment to compose SMS inbetween posting on here.

Dear all,
Any people have driver for Thumb Keyboard for O2 XDA II Windows 2003 SE.
Can you send me by email: [email protected].
Thank you

O2 employee, this is the message I get from that link.
The requested URL /thumbpaduk.exe was not found on this server.
Apache/1.3.31 Server at www.factor-xtech.co.uk Port 80

Related

Bluetooth audiodrivers for Win CE usable

http://www.atinav.com/bluetooth/bt_audiodriver.htm
Maybe someone could ahve alook at this link/page ?
I think it might be usable for audio through Bluetooth headset from MDA/XDA II/Qtec 2020 ?
ttt, looks decent to me. I didn't try, but it looks like you might be able to register and download it if you go the the downloads section. I might try it later if I get some time.
I registered, signed an aggreement, then they want me to fax an agreement and then contact them to arrange delivery blah blah blah.
Thanks you for your interest in Atinav's aveLink Bluetooth protocol Stack
for WIN CE
Please fill out the attached License Agreement and fax back to us at +1
732.412 2145. After receiving this agreement we will contact you
regarding the delivery options of the software.
If you have any problem to view the attachment please REPLY to this
message with your FAX Number, we will FAX you the Evaluation Agreement.
Thanks
Atinav Sales
Just tried to download but they want you to sign and fax back an evaluation agreement :idea:
I emailed & asked for a trial of their bluetooth audio driver for windows (for valid reasons; if I get it to work I can probably use it in a solution for my customers)
They emailed me back a login & pw. The login appears to work for downloading other versions of their s/w. You could try that approach.
Bear in mind that a) the trial I got was for 15 days only and if it's crackable then it's way beyond my abilities & b) their sales people will contact you to ask how you got on with the trial. :roll:
Totallytechie
totallytechie said:
I emailed & asked for a trial of their bluetooth audio driver for windows (for valid reasons; if I get it to work I can probably use it in a solution for my customers)
Totallytechie
Click to expand...
Click to collapse
Let us know if it works for you. Thanks.
henrylim said:
Let us know if it works for you. Thanks.
Click to expand...
Click to collapse
It didn't, but don't let that necessarily put you off. I'm using a Sony TR5MP laptop with an onboard Sony bluetooth chipset, which their stack doesn't seem to support. Note that Sony's chipset and/or drivers are notoriously a bit iffy, and wouldn't pair with anything except other Sony kit until XP SP2 came out.
What it does support (they claim) is any USB BT module. I'm currently trying to borrow a laptop from one of my colleagues, stick a USB BT adaptor in it and test out the stack.
However for "borrow" you can read "wrench from the lifeless hands of", so it might take a little while.
Totallytechie

How to make Pocket PC 2003 input software work on WM 5? (Celluon Laserkey)

I'm pissed. I ordered the Celluon Laserkey CL800BT as a mobile keyboard. But it appears it still has not had drivers/installation software created for WM 5. Nowhere on the seller's website did it mention this very critical piece of information. The Celluon website utterly fails to even mention the existence of WM 5 as something they either support or don't support, it's like they're stuck in 2003.
So, the question is... Is it possible to get this thing working on WM 5? I'm not sure if the input panel changes from 2003 to 5 are so big that the drivers supplied won't work or if it might be possible to just fiddle with the registry keys enough to get it to use the 2003 drivers. I figured out that certain registry structure changes were made in how the input software gets listed and so I tried to "upgrade" the entry for the Laserkey and that got the "Projection Keyboard" appearing in the list, but when I select it it just switches to the built-in WM keyboard input.
So, please, all you super clever people, help!!!
Quincy
Wow, that's a neat product. Thing is there is no difference in software keyboards between WM 5 and 2003 but what you have is a hardware keyboard that connects via BT.
If the drivers don't work it means they don't support your devices hardware or BT stack.
Unfortunately short of writing new drivers i do not see a solution to this.
I assume you tried installing it using the WM 2003 setup?
If it doesn't work i think you should ask for your money back.
Thanks, yeah, I tried the install for PPC 2003 and that completes, but as I mentioned the "Projection Keyboard" option in the SIP list does NOT appear. So I figured how what registry tweaking would make it appear but selecting it doesn't work. I changed the registry to point to the DLL I presumed should be called (there were only 2 that came with it, and I tried both) but nothing. I assume the SIP hooks into the DLL/etc. have changed from 2003 to 5.
It is an amazing product, if only it worked. Celluon must be in bad shape or something for them not to have current drivers (I contacted their tech support and have not heard back yet...). There are few things more annoying than having in your hands something that is amazingly cool and having absolutely no ability to use it.
I talked to the seller and it looks like they'll take it back, but I'm stunned they wouldn't have a big warning or at least a little warning/mention of the fact that it won't work on the current PPC OS.
So, warning to all, don't buy the Celluon Laserkey if you've got WM 5!
Quincy
One thing I just thought of, probably should have mentioned it before (this is really stupid of me):
Maybe the DLL you are messing with is not a SIP DLL at all? This is a hardware keyboard and it should work no matter what software keyboard is selected.
So try to do a clean installation (so your registry tweaks won't get in the way) and just open Word for example and type.
Also maybe it needs parring or some special BT settings?
Good suggestion, Levenum. I don't know exactly it is supposed to work, but I do know that you use the SIP selector to choose the "Projection Keyboard" and then it takes input from the keyboard. So, I'm pretty sure it really does act as a SIP. I've tried re-installing a few times, along the lines you suggest, having cleared everything out but still no luck.
I guess I'll wait another couple days and ship it back. I've written several times to Celluon but have yet to hear anything.
Quincy
Hmm, if they have written it this way (its possible of course) it would be a very stupid approach.
I had a chance to use a couple of hardware keyboards and they usually work separately from the SIP system be it BT or IR keyboard.
Strange that company creating a product primarily for mobile devices seems to know so little about them.
I too have the same problem with my IPAQ hx2490b running WM5.
I have found this web site which hosts a Celluon Laserkey driver for WM5 which installs OK without any registry changes.
The problem is that when the Projection Keyboard is seleted from the Input list and from the keyboard icon, I get a message to say BTM Cannot get current state. If I exit from the driver screen, I then get an error to say that the serial port is in use by another device which should be stopped before trying to use the Projection Keyboard again.
I have removed all of my other BT pairings, done a hard reset and started from scratch to no avail.
The CL800BT pairs OK until I load the driver. If anyone has any ideas for a workaround or has had success in getting this keyboard to work under WM5 I would be grateful for your advice.
I have emailed Celluon but have had no reply. The UK distributor has been trying to sort this for me for a week with no success.
IPAQ hx2490b
ROM 1.02.h
OS 5.1.1702 (Build 14366.1.0.1)
http://www.plawa.com/support/downloads/drivers/laserkey/
Laserkey and hp2490
Thanks for the info guys I found the web site and installed the 2005 drivers but as I expected I have the same problemb< ihave tried Celluon (waste of time never reply)
Looks like my new toy will have to go back unless anyone finds the answer
sucessfull test
Dear all,
there is a WM5-driver on the plawa page aviable -
and it's working as well on WM6 (testet with Hermes)!
okay, that's not a surprise - but the german shortcuts
are working as well!
can I have a link to the plawa page you refer to? I want to use it on wm6 too.
thanks

Where is BB Connect

I cant count the number of times I have read the new release about HTC supporting BB Connect on the S710...but i just got mine and no sign...
Tried the BB Connect that works on my Dash but not luck...PIN Pending.
RD
Whenever I hit "register now" it just goes to the homescreen really wanna get this working....
Same problem
Ciao.
I'm from Italy and I have same problem. No way to get BB Connect work on my HTC S710.
I can't find the PIN to activate it. Infact when I install the BB the phone try to connect but don'f find the PIN and stop the connection (as you told back in home page!!).
I tried to contact HTC customer service and they told me that HTC and RIM maybe will support BB Connect just with Carriers (i.e. TIM or VODAFONE in ITaly, ORANGE in France and UK, etc..). But why a lot of peaple can use BB connect with the carriers they wont and me no???? As you can see, also DOPOD ASIA support BBconnect in HTC devices!! So let's try together to find a way !!!
I really believe in this.
Thank you to everybody.
Davide.
I am guessing we are all using the BB Connect client from the s620... I think we need a new client for the S710
We will likely have to wait, just like last time
until it gets released by Dopod. They seem to get the BB Connect clients out first, and I have never seen a BB Connect client that wasn't model specific, so it will have to be a Vox variant to work on the Vox most likely. Start sniffing and asking around on Dopod boards, at least then they will know we are looking....
There will be a BBC client for the vox. This will be bbc v4, watch this space (or the ftp )
doedoe said:
There will be a BBC client for the vox. This will be bbc v4, watch this space (or the ftp )
Click to expand...
Click to collapse
Do you have it?
I am dying for BB Connect too, if it's 4.0 that would be awesome!!! I will ditch my dash when that comes out...
Not yet but I will do soon.
There is a full WM6 version waiting in the wings, lets hope it appears soon.
Here you are
It works great in HTC S710 spanish. Good luck.
http://www.hutch.in/blackberryconnect/bbc4[1].0.0.76.zip
You are my hero! I am trying it out on my dash right now on WM5, then will try wm6...though I may end up getting a vox this week now I can have bb connect!!!!
nmanero said:
It works great in HTC S710 spanish. Good luck.
http://www.hutch.in/blackberryconnect/bbc4[1].0.0.76.zip
Click to expand...
Click to collapse
well, maybe you´ll try cortado
it works with active sync fantastic on my s710
www.cortado.com (or .de; .co.uk and so on...)
sting0r said:
You are my hero! I am trying it out on my dash right now on WM5, then will try wm6...though I may end up getting a vox this week now I can have bb connect!!!!
Click to expand...
Click to collapse
I have downloaded, the bb connect and notice that it is meant for the windows 5 platform. Although it works on the dash, i dunno whether it will work on the vox as the vox is wm 6. This is my observation from having the hermes where if the hermes is flasg to wm6 the BB connect 4 meant for WM5 doesnot work unless there is some ehex editing on the device to make it look like WM6. Any useH anybody git it to connect on the vox yet.
i am also about to rush out and buy the Vox and just want to confirm this detail before doing so, any body tried it yet?
Just got the stuff,its a dopod C500 and i can safely say that it is working and receiving email. Thank you and apology for doubting the earlier post. All i can say is yippee
I read the XML in the cab, and it says this will work for all WM 5.x versions
This applies to Windows Mobile 5 and Windows Mobile 6 (internal version is 5.2). So, I know this works on my Vox(Win Mobile 6), as I am downloading emails just fine with it now, but does it work on the Dash/S620, etc as well? If it does, what versions does it work on? Just Windows Mobile 6, or also Windows Mobile 5? It should work on both. Now the next question, does it work on other devices like the Samsung BlackJack(Windows Mobile 5)? This would make this the closest we have seen to a universal Blackberry Connect client! One can hope, right?
work fine also in italy by tim
is the best many thanks tp DAVIDE......
It doesn't work on Samsung i600. There is an error when installing.
I may soond noob for this one ... but
WTF is BBConnect ???
blackberry connect
What's the point of using a blackberry app on a HTC smartphone???
KevinSephiroth said:
What's the point of using a blackberry app on a HTC smartphone???
Click to expand...
Click to collapse
I use it on HTC on S710 whith French Orange operator
it work fine

Pocket Controller Pro 6.01

Anyone use this software with the touch cruise?
I have been an avid user of this software for a long time now, and it just seems soooooo slow on the cruise.
I was previously using it with an HTC Apache and it seemed much more responsive...
Anyone else have similar issue?
========
Update: I enabled turbo mode and edited some other settings and enabled data compression and it seems to improve the functionality.
Hope this helps someone else
I've been using 6.01 build 1256 on my Kaiser and now for some weeks on my TC and it's performing the same, fast and good.
No problems at all here.
I'm using it with an Orbit 2 and it seems fine to me, just like the Orbit, TytN and Tytn 2 I've used it with. The only niggle is that I use it to type out SMS messages when I'm at a PC but the word suggestion feature on the Orbit 2 (which seems to be a replacement for the usual Windows Mobile one), gets in the way a bit so that I have to type s-l-o-w-l-y or it drops characters. I'd love to know how to switch the Orbit 2 back to using the normal word suggestion thing.
Pocket controller
Use this programme and Shall I again this problem - I can't draw down skin HTC Touch Cruise .
You can me him send ?
[email protected]
The skin for the Touch Cruise?
It won't let me download it either...you have to have a "registered version" of the program and have a valid lisence to download skins for the updated phones...it's not a big deal though, I just use the default skin, it looks fine.
surgex0 said:
The skin for the Touch Cruise?
It won't let me download it either...you have to have a "registered version" of the program and have a valid lisence to download skins for the updated phones...it's not a big deal though, I just use the default skin, it looks fine.
Click to expand...
Click to collapse
I've registered it so I've got the skin, but TBH I always use it with the skin feature turned off anyway, it's too much window around the screen. The phone is usually close enough to hand to press the physical buttons if I need to.
I have got skin on all possible to phones but Cruise far from it nor and registered PCP Shall I
Can you please help me with Pocket Controller.
I just installed it to both Pc (and when connected the cruise with USB active sync) , to the device. I can not connect to the TC.
When I press Connect it tries to oconnect:
Please Wait...
connecting using LAN/WAN...
connecting to 169.254.2.1...
establishing connection...
But nothing happens. not connection at all
thanks
There are other alternatives like EveryWAN RemoteSupport
Do you think that a free tool limited to cable/USB remote control of a PDA would be useful ?
e.g.: the product referenced here: EveryWAN RemoteSupport, is capable of much more, but I could decide to make a free version to help developer community.
The product which is designed to work over cellular networks and wifi would be restricted to cable/USB connection and totally free of charge or time-bomb.
PS: I am part of the company making the product ... which is a companion to our flagship Mobile Device Management and security product called EveryWAN MobilityManager
andyturner said:
I've registered it so I've got the skin, but TBH I always use it with the skin feature turned off anyway, it's too much window around the screen. The phone is usually close enough to hand to press the physical buttons if I need to.
Click to expand...
Click to collapse
Can you please send us the HTC Touch Cruise skin?
EveryWAN
hasta_la_vista said:
Do you think that a free tool limited to cable/USB remote control of a PDA would be useful ?
e.g.: the product referenced here: EveryWAN RemoteSupport, is capable of much more, but I could decide to make a free version to help developer community.
The product which is designed to work over cellular networks and wifi would be restricted to cable/USB connection and totally free of charge or time-bomb.
PS: I am part of the company making the product ... which is a companion to our flagship Mobile Device Management and security product called EveryWAN MobilityManager
Click to expand...
Click to collapse
Doesn't go draw down nor after clerkish needed data
athanaso77 said:
Can you please send us the HTC Touch Cruise skin?
Click to expand...
Click to collapse
Not to be a stickler, but I don't think uploading the skin onto here would be a good idea, since you can only get it if you have the registered version of the program.
EveryWan looks like the Enterprise version of pocket controller..
It looks very interesting, and I'm glad to see that there are people making amazing software like that for free.
Personally, I do not need all of the extra features which is why I'll stick with PCPro, and also the reason why I didn't download the enterprise version.
thenkssssssss

remote desktop client

I searched for it in the forum but didn't find anything about it: can anyone suggest me a remote desktop client to access my PC using a WM 6.5 device? Thank you in advance!
Hi,
try the attached file.
It's from WM6.1, but it works with no problems on WM6.5 (at least, for me)
Good luck
Thank you for fast response, i'll try it ASAP.
WM6.5 have a RDP client default
search ended with this
search for zaDesktopSP.cab it works fine on wm6.5
&
zaTunnel.CAB
it really works with great features
which device and ROM you use? I think it should already be present....no need to install additional software
thank you for sending suggestions. Maybe in Tael ROM rdp client is not included, or at least I can't find it... in wich folder is supposed to be? How the filename looks like?
@ a2287884: Thank you, zaDesktopSP is the only one I can use, since it has the ability to specify the port number (I use port forwarding: at office we all share the same public IP but each PC use a different port number to access 3389 port). It works on WM 6.5.
If somebody finds it useful, here's the official link: http://www.zatelnet.com/zadesktop/main.php
mastazi said:
@ a2287884: Thank you, zaDesktopSP is the only one I can use, since it has the ability to specify the port number (I use port forwarding: at office we all share the same public IP but each PC use a different port number to access 3389 port). It works on WM 6.5.
If somebody finds it useful, here's the official link: http://www.zatelnet.com/zadesktop/main.php
Click to expand...
Click to collapse
I'm using same ROM and yes rdp client is not included. I tried RDP_61.cab but not works. I mean it says connecting and nothing happens. So i tried zaDesktopSP and works perfect. is this free?
I should say something. You can use RDP_61.cab with port number if its works in your device. ip addressort number.
For example 192.xxx.xxx.xxx:3422
@cem_ari: yes it's free (free as "free beer", not free as "open source"), check on the developer's site (link in my previous post).
@cem_ari: yes that's the way i set port number in win xp client, but in RDP_61.cab I wasn't able to set port number using :1234 format at the end of the IP address, because ":" is not an accepted character, you can only use numbers and dot (.)

Categories

Resources