Database Info

XDA II - BACKpack Solution

I have used the backpack, really very slowwwwww with screen mirror! anyone face the same problem? Pls help!

tcnk said:
I have used the backpack, really very slowwwwww with screen mirror! anyone face the same problem? Pls help!
Click to expand...
Click to collapse
Well, I have been saying that for ages, you are the first one who share this with me!
Yep, it is too slowwwwww with me too, but I found a little trick to avoid that!
In the Screen Mirror, go to "Refresh", set the "Predefined Settings" to "PIM, Word, Database". This will make Screen Mirror quite fast and acceptable.
If you set it to be "Photo/Presentation", then the imate will be too slowwwww, while if you set it to be "Animation" or "MPEG video", then the Screen Mirror will never work again!!! and there is no way to use it or make a presentation. I had to Hard-Reset my iamte to change the settings to "PIM, Word, Database"!!
Any way, I was able to make a prsentation on the setup of "PIM, Word, Database", but can not make the display in landscape!!, or, I can run the show in the normal portrait display, using "stretch" option in "layout" but it looks ugly!!
What did you do in this regard?

Luckily, I didn't buy the backpack that I planned to buy soon.
That means I've better to use my notebook to do presentation.
Thanks guys for your comments.

chris_khho said:
Luckily, I didn't buy the backpack that I planned to buy soon.
That means I've better to use my notebook to do presentation.
Thanks guys for your comments.
Click to expand...
Click to collapse
The presentation software that comes with the backPack is fantastic. Do not confuse it with Screen Mirror which is the apllication that simply projects your entire PDA screen. Screen Mirror is certainly handy for training in PDA software applications but not used for powerpoint presentations.
One feature the BackPack presentation software has that the laptop does not is the ability to project only the presentation slides (via the lcd projector) but display both the speakers notes and the presentation slides on the screen of the PPC. I find this very handy as I use the speakers notes for questions and answers as part of my test for understanding slides.
Ed

I guess "Chris" and most users (including me) are looking for Powerpoint presentations, if you only need the BackPack for presentation, it will not help at all!! unless you need it to use CF Card!, then it might be useflul to have it, and as you "Ed" mentioned, to make a presentation about xda, to project the data, then yes, it is good to have as well.
Note that Windows 2003SE (2nd Edition) has good features that will help in presentations! (the Landscape View and 640X480 resolution)! I am waiting for it to update my imate and then try BackPack for presentation once again!

Sorry GoldenSands I don't understand
I think the backPack works great for powerpoint presentations, that's the main thing I use it for. I have the presentations saved either on an SD card or a CF if I have to take a lot of large files. But even from the SD or main memory the presentation software works a treat. The backpacks battery is smaller but it does prolong battery life and that is a bonus too. Without the BackPack I cannot use my XDA II for presentations.
What do you mean
if you only need the BackPack for presentation, it will not help at all!!
Click to expand...
Click to collapse
Sorry not trying to be silly I just miss your point.
Ed

Dear Ed, may be I did not express my thoughts very well. When I did a presentation using the backpack, I had the following problems:
1- Imate is slow.
2- Presnetation is in portrate, not in landscape (as normal Power Point presentation).
3- Small size (small resolution) not in 640X480.
4- If I use Stretch Option (to get large projection), then quality is poor.
Now, taking above points into consideration, presentaion done through backpack is not powerful and I can not do any presentaion, although I need it badly, I do about 3 to 4 presentaions a week!
That's what I meant by buying it for presentaions (to do Powerpoint ones) will not help since I have to design the Powerpoint presentation in certain size to fit the backpack limitations.
My questions:
1- Are you able to make the presentaion in Landscape?
2- Were you able to use 640X480 resolution?
3- How fast is your imate or xda2 when you use Speed Mirror?
4- What is the version of Speed Mirror you have? (mine is Ver 2.01)
5- In VGA Refresh Settings, do you set it to be "PIM, Word, Database"? or something else?
Regarding the battery, I agree with you, it is a small added value component (600 mAm) only, but it is good to have any way.

GoldenSands said:
My questions:
1- Are you able to make the presentaion in Landscape?
2- Were you able to use 640X480 resolution?
3- How fast is your imate or xda2 when you use Speed Mirror?
4- What is the version of Speed Mirror you have? (mine is Ver 2.01)
5- In VGA Refresh Settings, do you set it to be "PIM, Word, Database"? or something else?
Regarding the battery, I agree with you, it is a small added value component (600 mAm) only, but it is good to have any way.
Click to expand...
Click to collapse
OK, seems like you do things different than me.
Firstly I do not use ScreenMirror for presentations, I use ClearVue Presentation Suite v2.3.377 which came on the CD with my backpack.
Presentations work at "normal" speed with transition effects etc. And as I said earlier I do like ability to see the speakers notes on my XDA II but only project the slides to the LCD projector.
Next in answer to your questions above.
Q1. Yes (Using ClearVue)
Q2, Yes (Using ClearVue), 640 x 480 x 64k @ 85Hz or 800 x 600 x 64K @ 60Hz
Q3. As I said I do not use SpeedMirror for presentations. By the way, my Mirror application is called ScreenMirror v2.01, NOT SpeedMirror, are they different? Anyway, when I use ScreenMirror yes it can be slow but is OK for how to teach using PPC applications etc and it only operates in Portrait. I do not use it for power point slide shows.
Q4. When I use it, and that is not often, I usually have it on PIM, Word, Database. For example It has been OK on how to teach people to use SpriteBackupPremium at a PPC user group meeting. No need for landscape as it is an application to Mirror the PPC screen, that is it only projects the PPC exactly as it looks in on your hand unit. That is why it is good for teaching how to use the PPC applications.
Hope this helps.
Ed

ednap said:
OK, seems like you do things different than me.
Click to expand...
Click to collapse
Dear Ed,
Yep, I guess I was totally not aware about making the presentation through the ClearVue PPT directly (without using the Screen Mirror)!
I went to "Setup" / "Preferences" in ClearVue, then was surprised about the option that allows me to use External Video Adaptor! That was the reason; I was using Screen Mirror (not Speed Mirror).
Thanks for your advice, that's the benefit of this forum, we learn from each other. However, I need a little advice from you, when I choose to use the "External Video Adaptor" in ClearVue, using VGA as an Output. Then try to open a presentation, an error message appears saying "Another Presentation viewer is running, please close the other viewer and try again". While there is nothing else is running. I have even re-installed the VGA Package!
Well, one time after several trials, I got different message: "The External display is in use by another application. Would you like to continue to use the external display?" whatever I chose, nothing appears in the screen.
Note that I am making all these tests using the Monitor, not the projector, do you think this make a different?
ednap said:
Hope this helps.
Click to expand...
Click to collapse
Yep, it helped a lot. Please let me know if you had experienced such problems with the imate and BackPack.
Thank you..

Well I'm glad my coments helped and we are both talking the same language now
I just tried using ClearVue and the backpack connected to my PC monitor rather than my LCD projector and it still worked fine for me. No errors like you mention in your post. So what you are doing should work.
I presume you tried performing a softreset with backpack and monitor connected, then before starting any other applications load clearvue, open your presentation file, then tap on the slideshow icon?
Not sure what else to suggest but please post your results.
BTW, where abouts in Saudi are you? (from your flag) I worked there for a couple of years about 7 years ago. I was in Al Jubail but managed to explore the entire country including the empty quarter. Had a great time and still have some friends there.

ednap said:
Well I'm glad my coments helped and we are both talking the same language now .
I just tried using ClearVue and the backpack connected to my PC monitor rather than my LCD projector and it still worked fine for me. No errors like you mention in your post. So what you are doing should work.
Click to expand...
Click to collapse
I was away for a short business trip. However, I was trying to do more tests and more research. I still get the same error, but what surprised me more today, even if I try to open any presentation using ClearVeu (selecting the option of using External VGA) while the BackPack is not attached; I still get the same error. I also connected the imate to my projector, it works OK with Screen Mirror, but never worked with the ClearVue. I did a lot of trials and restarts.
I also did a little research, and I found this useful link. But I guess I am alone getting this error!!
http://www.ppcw.net/index.php?itemid=1916
Remaining one more test to do, I will use the imate of my brother-in-low, I am going to install the Screen Mirror Software along with ClearVue (of course) and will try to run a presentation, lets see what error we get! hope it works, if so, it means then my imate (or Windows) might have a problem since BackPack works OK.
By the way, what Rom version are you using, is it 1.72 or 1.66?
ednap said:
BTW, where abouts in Saudi are you? (from your flag) I worked there for a couple of years about 7 years ago. I was in Al Jubail but managed to explore the entire country including the empty quarter. Had a great time and still have some friends there.
Click to expand...
Click to collapse
That's nice, Juabial is not far from where do I live. I live now in Dhahran (almost 100Km away from Jubail). I have not been in Empty quarter or even a lot of places, except major cities in Kingdom!!

I'm using the 1.66 ROM , standard rom from when I purchased the unit. I have been happy with it so did not upgrade to another.
I'm surprised with your error and I do hope you can get it sorted out as the ClearVue really is fantastic software.
Ed

ednap said:
I'm using the 1.66 ROM , standard rom from when I purchased the unit. I have been happy with it so did not upgrade to another.
I'm surprised with your error and I do hope you can get it sorted out as the ClearVue really is fantastic software.
Click to expand...
Click to collapse
Mmmm, you gave me a good hint again! I will test ClearVue with BackPack and try to make a presentation on 2 imates, one with 1.72 ROM and another one with 1.66 ROM. If it worked, then will see away to downgrade mine to 1.66!! I will try to do this test ASAP. Thanks a lot dear.

Bug in ClearVue
I'm having the same bug with ClearVue with the message "another presentation viewer is running, ...".
I visited the Westtek website and found that there's an updated release of the software. They want money for the update.
I think that the whole thing is offensive. Selling an untested application is offensive, asking for more money to fix it is offensive. I wish I could throw the product back in the face of the Dubai Duty Free employee.
BTW, no one should downgrade their ROM to get one crappy application to function.

Just wondered if you guys had seen this page, on O2 site for a ClearVue update for 1.72
http://www.sourceo2.com/O2_Developers/Devices/O2_Xda_II/VGA_Backpack.htm
I don't have a backpack, so I can't test it but it might solve your problems!
HTH
Fin

Bug in ClearVue and the Expansion Pack
I tested the update and it didn't work. I wrote to club i-mate support.
I'll keep you posted on their reply.
Thanks to all for the forum.

Dear "findus", thanks a lot for the link, but as "OZK" has mentioned, it did not work, hope some one has a solution!

Replies regarding the Presentation Viewer Bug
Club i-Mate:
Thank you for writing in, I personally tested the i-mate back pack with version 1.72 and did not come up with any error messages.
Westtek:
I have not been able to reproduce the problem. Please try the following and let me know at what step you get the error message.
1. Soft reset your device
2. Open ClearVue Presentation
3. Open a Presentation file
4. Run a Slide Show on your pocket PC (without configuring external video)
5. Exit the Slide Show and exit ClearVue Presentation.
6. Plug in the backpack and open ClearVue Presentation
7. Open a Presentation file
8. Configure the External Video Adapter in ClearVue Presentation (do not open the mirror software)
9. Run a slide show
I tried the steps and the problem is still there.
Now I'm out of ways to get help and being in the Middle East, there's no way I can get my money back (no one protects consumers here).

Update to Back Pack Driver
After having denied that they had a problem with the dirver, Club i-mate have posted an update:
http://www.clubimate.com/Support/BackpackDriver.sa.CAB
They never bothered themseleves to reply to my emails, I found the update by chance.
If the above fix doesn't solve the back pack problem, try hard resetting. Hard reseting worked for me even without the updated driver.

How to make Pocket PC 2003 input software work on WM 5? (Celluon Laserkey)

I'm pissed. I ordered the Celluon Laserkey CL800BT as a mobile keyboard. But it appears it still has not had drivers/installation software created for WM 5. Nowhere on the seller's website did it mention this very critical piece of information. The Celluon website utterly fails to even mention the existence of WM 5 as something they either support or don't support, it's like they're stuck in 2003.
So, the question is... Is it possible to get this thing working on WM 5? I'm not sure if the input panel changes from 2003 to 5 are so big that the drivers supplied won't work or if it might be possible to just fiddle with the registry keys enough to get it to use the 2003 drivers. I figured out that certain registry structure changes were made in how the input software gets listed and so I tried to "upgrade" the entry for the Laserkey and that got the "Projection Keyboard" appearing in the list, but when I select it it just switches to the built-in WM keyboard input.
So, please, all you super clever people, help!!!
Quincy

Wow, that's a neat product. Thing is there is no difference in software keyboards between WM 5 and 2003 but what you have is a hardware keyboard that connects via BT.
If the drivers don't work it means they don't support your devices hardware or BT stack.
Unfortunately short of writing new drivers i do not see a solution to this.
I assume you tried installing it using the WM 2003 setup?
If it doesn't work i think you should ask for your money back.

Thanks, yeah, I tried the install for PPC 2003 and that completes, but as I mentioned the "Projection Keyboard" option in the SIP list does NOT appear. So I figured how what registry tweaking would make it appear but selecting it doesn't work. I changed the registry to point to the DLL I presumed should be called (there were only 2 that came with it, and I tried both) but nothing. I assume the SIP hooks into the DLL/etc. have changed from 2003 to 5.
It is an amazing product, if only it worked. Celluon must be in bad shape or something for them not to have current drivers (I contacted their tech support and have not heard back yet...). There are few things more annoying than having in your hands something that is amazingly cool and having absolutely no ability to use it.
I talked to the seller and it looks like they'll take it back, but I'm stunned they wouldn't have a big warning or at least a little warning/mention of the fact that it won't work on the current PPC OS.
So, warning to all, don't buy the Celluon Laserkey if you've got WM 5!
Quincy

One thing I just thought of, probably should have mentioned it before (this is really stupid of me):
Maybe the DLL you are messing with is not a SIP DLL at all? This is a hardware keyboard and it should work no matter what software keyboard is selected.
So try to do a clean installation (so your registry tweaks won't get in the way) and just open Word for example and type.
Also maybe it needs parring or some special BT settings?

Good suggestion, Levenum. I don't know exactly it is supposed to work, but I do know that you use the SIP selector to choose the "Projection Keyboard" and then it takes input from the keyboard. So, I'm pretty sure it really does act as a SIP. I've tried re-installing a few times, along the lines you suggest, having cleared everything out but still no luck.
I guess I'll wait another couple days and ship it back. I've written several times to Celluon but have yet to hear anything.
Quincy

Hmm, if they have written it this way (its possible of course) it would be a very stupid approach.
I had a chance to use a couple of hardware keyboards and they usually work separately from the SIP system be it BT or IR keyboard.
Strange that company creating a product primarily for mobile devices seems to know so little about them.

I too have the same problem with my IPAQ hx2490b running WM5.
I have found this web site which hosts a Celluon Laserkey driver for WM5 which installs OK without any registry changes.
The problem is that when the Projection Keyboard is seleted from the Input list and from the keyboard icon, I get a message to say BTM Cannot get current state. If I exit from the driver screen, I then get an error to say that the serial port is in use by another device which should be stopped before trying to use the Projection Keyboard again.
I have removed all of my other BT pairings, done a hard reset and started from scratch to no avail.
The CL800BT pairs OK until I load the driver. If anyone has any ideas for a workaround or has had success in getting this keyboard to work under WM5 I would be grateful for your advice.
I have emailed Celluon but have had no reply. The UK distributor has been trying to sort this for me for a week with no success.
IPAQ hx2490b
ROM 1.02.h
OS 5.1.1702 (Build 14366.1.0.1)
http://www.plawa.com/support/downloads/drivers/laserkey/

Laserkey and hp2490
Thanks for the info guys I found the web site and installed the 2005 drivers but as I expected I have the same problemb< ihave tried Celluon (waste of time never reply)
Looks like my new toy will have to go back unless anyone finds the answer

sucessfull test
Dear all,
there is a WM5-driver on the plawa page aviable -
and it's working as well on WM6 (testet with Hermes)!
okay, that's not a surprise - but the german shortcuts
are working as well!

can I have a link to the plawa page you refer to? I want to use it on wm6 too.
thanks

Keyboard evolution

Guys it's just me or it is a fact that the progress of windows mobile is really slow?
I mean there are several versions of windows mobile, 6.0 got our before 5.0 was even running well enough (not to mention several bugs in 5.0 that were barely fixed) and I wonder: wouldn't it be better to stick to an OS version for a longer period of time and make it run really good?
I won't go into a debate mac vs pc or anything of this kind, but isn't the standard windows mobile interface a bit boring? I like the iPhone for the innovative interface and design only, or another model I've seen m8 from meizu.
Something should change, not just a fancy gradient in the titlebar and the menubar!!!!!
I have a problem with the keyboards too. The MS sip is the same since 2002 pocket pcs!!! And that is really a lot of time of using the same cra.ppy system, and forgive me for overreacting but I think entering texts is a main concern, we all use these devices mainly as communicators or for various information storage that needs to be edited, moved from a location to another an all these actions require user input...
I know there are lots of experienced users on this forum, so this is a call to all of them , I need their suggestions in what would be the best choice for a text-input software for Pocket PCs?
I was using the SPB keyboard for about 2 years now I really like it, it's just that it covers all my text (yeah, I know it's fulscreen ), and I would like to try some similar variants: concern #1 : it must have big keys or it's useless to me.
Thanks for your time, everyone!

I'm using ZTA4 SIP, it's mainly for Chinese input but also can be used for English typing.
Cheers,
Vibranze

thanks, any link for that?

xda-addict said:
Guys it's just me or it is a fact that the progress of windows mobile is really slow?
I mean there are several versions of windows mobile, 6.0 got our before 5.0 was even running well enough (not to mention several bugs in 5.0 that were barely fixed) and I wonder: wouldn't it be better to stick to an OS version for a longer period of time and make it run really good?
I won't go into a debate mac vs pc or anything of this kind, but isn't the standard windows mobile interface a bit boring? I like the iPhone for the innovative interface and design only, or another model I've seen m8 from meizu.
Something should change, not just a fancy gradient in the titlebar and the menubar!!!!!
I have a problem with the keyboards too. The MS sip is the same since 2002 pocket pcs!!! And that is really a lot of time of using the same cra.ppy system, and forgive me for overreacting but I think entering texts is a main concern, we all use these devices mainly as communicators or for various information storage that needs to be edited, moved from a location to another an all these actions require user input...
I know there are lots of experienced users on this forum, so this is a call to all of them , I need their suggestions in what would be the best choice for a text-input software for Pocket PCs?
I was using the SPB keyboard for about 2 years now I really like it, it's just that it covers all my text (yeah, I know it's fulscreen ), and I would like to try some similar variants: concern #1 : it must have big keys or it's useless to me.
Thanks for your time, everyone!
Click to expand...
Click to collapse
Try the skinnable Resco keyboard, several options available. See screenshot and download link below.

xda-addict said:
thanks, any link for that?
Click to expand...
Click to collapse
I attached here, try it yourself
Instead of choosing the unknown chinese character, you can choose Abc so you will be able to type in English.
Cheers,
Vibranze

hotdog53 said:
Try the skinnable Resco keyboard, several options available. See screenshot and download link below.
Click to expand...
Click to collapse
Something happened to screen shot. Here's another one.

hotdog53 said:
Something happened to screen shot. Here's another one.
Click to expand...
Click to collapse
Thanks for the post!
Unfortunatelly Resco has too small keys, almost like the default SIP, I can't use it
vibranze I'm gonna try it asap!

vibranze said:
I attached here, try it yourself
Instead of choosing the unknown chinese character, you can choose Abc so you will be able to type in English.
Cheers,
Vibranze
Click to expand...
Click to collapse
Vibranze thanks for the efforts but the ZTA4 SIP DOESN'T WORK ON MY DEVICE.
I have attached a screenshot, it loads, but it is unusable. Still it seems to have pretty small keys, but I'm not sure as it doesn't load properly, what could I do?

wow Guys, check this out:
http://forum.xda-developers.com/showthread.php?t=322441
now this is a keyboard!

xda-addict said:
Vibranze thanks for the efforts but the ZTA4 SIP DOESN'T WORK ON MY DEVICE.
I have attached a screenshot, it loads, but it is unusable. Still it seems to have pretty small keys, but I'm not sure as it doesn't load properly, what could I do?
Click to expand...
Click to collapse
Hi,
Attached is the screenshot taken from my device. Altough it's a bit small but if you use stylus it's far far better than the normal keyboard, and some more it's also support keypad typing
Cheers,
Vibranze

WM Torrent Client???

Hi guys,
Plz help me out with this....I want a WM Torrent client....i have downloaded one recently, WinMobile, but its a trial version....
Anyone know about any free available full version bit torrent client???
Thanks in advance...

afaik there is no free torrent sw for pocketpc, and the one I use is adisastas wmTorrent. Works very well, as you might already know.
I use my PPC to download stuff during the night by means of WiFi, because my PC is that loud and there is no door between the bedromm and where my PC is located

bommel0815 said:
afaik there is no free torrent sw for pocketpc, and the one I use is adisastas wmTorrent. Works very well, as you might already know.
I use my PPC to download stuff during the night by means of WiFi, because my PC is that loud and there is no door between the bedromm and where my PC is located
Click to expand...
Click to collapse
Thanks man....but the main problem is that I have got WinMobile...but it is a trial version...not a freeware....
Can you provide an activation id or a crack or something...
Thanks.

dont request warez in this forum
it's not allowed here

Rudegar said:
dont request warez in this forum
it's not allowed here
Click to expand...
Click to collapse
Sorry....just wanted a full version application from a fellow member...he possesses one!

yes, and I payed for it.
you can't be serious to ask for a crack here!?!
if you need the software, the USD 20,-- should't be a problem.
If its not worth that much to you, you obviously don't need it.
I am a Software Engineer by trade and I am pretty sure Adisasta put some work in this application. As said, it works very well. It has a nice interface too, btw.
edit: http://www.adisasta.com/wmTorrent.html
hit the "Add to Cart" button and feel better afterwards...

bommel0815 said:
yes, and I payed for it.
you can't be serious to ask for a crack here!?!
if you need the software, the USD 20,-- should't be a problem.
If its not worth that much to you, you obviously don't need it.
I am a Software Engineer by trade and I am pretty sure Adisasta put some work in this application. As said, it works very well. It has a nice interface too, btw.
edit: http://www.adisasta.com/wmTorrent.html
hit the "Add to Cart" button and feel better afterwards...
Click to expand...
Click to collapse
Thanks man...will get it as soon as possible...

Okay.....I was just thinking....will this application work in WM6.1 environment???

yes, it will.
actually, I tried it on my WM 6.1 equipped e-ten.

bommel0815 said:
yes, it will.
actually, I tried it on my WM 6.1 equipped e-ten.
Click to expand...
Click to collapse
okay boss...

Has anyone got wmtorrent to work properly. I keep getting "no tracker" from any torrent I try to leech.

I have same problem, and almost every where I try to dl it says: "Client Banned" or something like that : /

I just sent their "support" team a email about this problem. If they give me a solution, I will post it here for others to see.

Thank you for your email.
‘No Tracker’ means wmTorrent cannot reach the tracker URL.
Either the url is out of reach because it is a tracker-less torrent or your Internet connection is faulty.
In the first case, wmTorrent currently does not support tracker-less torrent.
In the second case, you need to check your connection settings.

It appears the Wmtorrent isn't even trying to establish a data connection. It's just sitting there, I never see my 3G icon change. Anyone know a solution?

wmtorrent issues
I used wmtorrent for some time now so I know the program pretty good.You have to establish a connection to the internet before connecting in wmtorrent.I usually use a program like im+ to connect to the internet or u can turn it on in comm manager, then in wmtorrent menu,tools,check connect you should see a green circle with on in upper left corner.If you click the notepad looking tab with a gear in front,thats your log it should show activity.

LOL,, I was just about to post this. I have to open Beejives IM client to get the data connection up. Thank's for your post. I wonder if this is a bug they plan to fix.
D1ab70 said:
I used wmtorrent for some time now so I know the program pretty good.You have to establish a connection to the internet before connecting in wmtorrent.I usually use a program like im+ to connect to the internet or u can turn it on in comm manager, then in wmtorrent menu,tools,check connect you should see a green circle with on in upper left corner.If you click the notepad looking tab with a gear in front,thats your log it should show activity.
Click to expand...
Click to collapse

I have it working, but for some reason my data connection will drop. What do you mean by, "cut it on in comm manage". I don't see any setting that will bring up the data connection automatically, and keep it up.
D1ab70 said:
I used wmtorrent for some time now so I know the program pretty good.You have to establish a connection to the internet before connecting in wmtorrent.I usually use a program like im+ to connect to the internet or u can turn it on in comm manager, then in wmtorrent menu,tools,check connect you should see a green circle with on in upper left corner.If you click the notepad looking tab with a gear in front,thats your log it should show activity.
Click to expand...
Click to collapse

connection
1jaxstate1 said:
I have it working, but for some reason my data connection will drop. What do you mean by, "cut it on in comm manage". I don't see any setting that will bring up the data connection automatically, and keep it up.
Click to expand...
Click to collapse
depending on which comm manager(using new on/off style) it should say data connection or old style (green bkground w/ buttons) i believe its the buttons with arrows pointing to each other, if anything you can go in connection settings and connect from there,i personally use wktask bc it has a functions menu when u click in the most upper right in today screen,that allows you to connect/disconnect with your set connection.
btw i remember adidasta the developers for wmtorrent posted in their support forum about developing wmtorrent v3!! this was a month / two ago afaik they stated it will released after the d wnload accelerator app which is been out quite some time, and nowadays if you go to their forum that posting you can no longer find!! so im guessing they no longer developing it.This a shame because they had good fixes lined up including auto connect,dht,download structure (no more one file download,works like azureus) ,and etc.

D1ab70 said:
btw i remember adidasta the developers for wmtorrent posted in their support forum about developing wmtorrent v3!! this was a month / two ago afaik they stated it will released after the d wnload accelerator app which is been out quite some time, and nowadays if you go to their forum that posting you can no longer find!! so im guessing they no longer developing it.This a shame because they had good fixes lined up including auto connect,dht,download structure (no more one file download,works like azureus) ,and etc.
Click to expand...
Click to collapse
Sorry for the disappearing of the pertinent post, it was a sincere mistake of our team, we accidentally deleted the database while upgrading the forum.
I can assure you that we are still developing wmTorrent. There are lot of problems we have to address before we can release the latest version, it is indeed a huge undertaking for us and with very limiting income that this project has generated so far, we are really struggling to keep it alive. It is the love of programming and BT protocol that make me fund and develop this project in the beginning and also because of that, I will never abandon the project. For better or worst.
I believe, you know the condition of software developers for WM.
Recently I have to switch our resources to another project, wmZip, due to immediate demands from vertical markets. By so doing, unfortunately, it contributes to the delay of wmTorrent v.3 release date. I hope I can put it back on track soon.
I would also like to take this opportunity to thank all of you who have supported us so far, believe us, we will live up to your expectation and deliver a better version in the future. Be patient

My Mobiler alternative?

For some reason, I can't use my keyboard to input any data through My Mobiler, nor can I use the copy/paste feature. My keyboard only works on the home screen for dialling numbers!?
So basically, is there another way to connect to my Vox (6.1) using my PC?
Is there a VNC server for the phone?
Shame My Mobiler doesn't work. It's great to use, but keyboard input is my main concern.
A program called True connect works perfectly but it's ugly and costs £15!!
Thanks

I'm having the same issue as well on a HTC S620... Seems to not work on keyboard input

crushedlizard said:
For some reason, I can't use my keyboard to input any data through My Mobiler, nor can I use the copy/paste feature. My keyboard only works on the home screen for dialling numbers!?
So basically, is there another way to connect to my Vox (6.1) using my PC?
Is there a VNC server for the phone?
Shame My Mobiler doesn't work. It's great to use, but keyboard input is my main concern.
A program called True connect works perfectly but it's ugly and costs £15!!
Thanks
Click to expand...
Click to collapse
there are several other apps like that, umm.. soti pocket controller, sparus software everywan, I think the everywan is free.

Guys, always make sure you thoroghly read the articles I post. I've dedicated a full roundup to this question some 1-2 weeks ago; see http://forum.xda-developers.com/showthread.php?t=496296

A suggestion
Menneisyys said:
Guys, always make sure you thoroghly read the articles I post. I've dedicated a full roundup to this question some 1-2 weeks ago; see http://forum.xda-developers.com/showthread.php?t=496296
Click to expand...
Click to collapse
Could you add Celio Redfly Desktop Mobile Viewer Beta to your comparison list, please? I don't know if it is worthwhile but as you are a pro in this field and pride yourself in doing this sort of testing, if only for the sake of thoroughness ... it would satiate my curiosity.
Thanks,
Wovens

wovens said:
Could you add Celio Redfly Desktop Mobile Viewer Beta to your comparison list, please? I don't know if it is worthwhile but as you are a pro in this field and pride yourself in doing this sort of testing, if only for the sake of thoroughness ... it would satiate my curiosity.
Thanks,
Wovens
Click to expand...
Click to collapse
OK, I will. I'll let you know when it's ready. (Some days at least.)

wovens said:
Could you add Celio Redfly Desktop Mobile Viewer Beta to your comparison list, please? I don't know if it is worthwhile but as you are a pro in this field and pride yourself in doing this sort of testing, if only for the sake of thoroughness ... it would satiate my curiosity.
Thanks,
Wovens
Click to expand...
Click to collapse
Started testing it. So far, looks VERY cool.

I'm having a problem with the mute, I manually muted my phone (on the touch pad) and later I un-muted it with the mouse by clicking on the my mobiler display and now my phone is stuck with the speaker off, if I answer a call I can't hear anything (but they can hear me). Any suggestions on how to fix this? I really need help.