Related
Hi guys,
As mentioned in a previous thread, my F1 is soft bricked, only with the Oppo logo, no fastboot or recovery. I need to flash it again with a soft called QFIL (soft for Qualcomm devices). But it can't be done with the ordinary stock roms, I need a specific rom compatible with QFIL, like the ones used in the service centers. Is there anyone who can provide me with such a rom, or a link to download one in order to save my device?
Thank you
Can someone owning a Oppo f1 use QFIL to extract all the necessary files in order to flash them to my phone? I would be very grateful.
I have the, flashing tool and rom needed to unbrick the f1 from any softbricked state.
Let me know if you still need it, and I'll upload it somewhere and write a quick guide.
Worked for me even after I killed the bootloader.
tb303lava said:
I have the, flashing tool and rom needed to unbrick the f1 from any softbricked state.
Let me know if you still need it, and I'll upload it somewhere and write a quick guide.
Worked for me even after I killed the bootloader.
Click to expand...
Click to collapse
Hi, good news, I would be glad and would appreciate if you could send them to me.
Thanks in advance.
QDLoader Flasher Drivers and Firmware.
This will unbrick the Oppo F1f even if bootloader has been corrupted.
How to:
Download and extract this archive.
Install the QDLoader driver found in the DRIVER directory of the extracted archive.
Switch phone off, hold Vol-Up and connect USB cable between phone Pc .
Run Msm8x39DownloadTool.exe (in F1EX_11_A.05_160128 directory) as Administrator.
Select phone type (16GB or 32GB)
Choose the port your phone is connected to from the list. (It will be the one which says Com Device as Device Type.
Tick "Reset when .."
Click Start.
Let it do its thing, and bam! working stock F1f.
warning this will delete all user data.
Any questions PM me.
Al
tb303lava said:
QDLoader Flasher Drivers and Firmware.
This will unbrick the Oppo F1f even if bootloader has been corrupted.
How to:
Download and extract this archive.
Install the QDLoader driver found in the DRIVER directory of the extracted archive.
Switch phone off, hold Vol-Up and connect USB cable between phone Pc .
Run Msm8x39DownloadTool.exe (in F1EX_11_A.05_160128 directory) as Administrator.
Select phone type (16GB or 32GB)
Choose the port your phone is connected to from the list. (It will be the one which says Com Device as Device Type.
Tick "Reset when .."
Click Start.
Let it do its thing, and bam! working stock F1f.
warning this will delete all user data.
Any questions PM me.
Al
Click to expand...
Click to collapse
Hi, I downloaded the zip, followed your steps and...my phone is alive and everything works perfectly. Thank you so much for your help. Couldn't have been done without you.
How to choose the port?? I am not able to choose the port. When i connect it to pc whole holding volume up button it doesn't show anything.
sir is your file is from optus australia
tb303lava said:
QDLoader Flasher Drivers and Firmware.
This will unbrick the Oppo F1f even if bootloader has been corrupted.
How to:
Download and extract this
Install the QDLoader driver found in the DRIVER directory of the extracted archive.
Switch phone off, hold Vol-Up and connect USB cable between phone Pc .
Run Msm8x39DownloadTool.exe (in F1EX_11_A.05_160128 directory) as Administrator.
Select phone type (16GB or 32GB)
Choose the port your phone is connected to from the list. (It will be the one which says Com Device as Device Type.
Tick "Reset when .."
Click Start.
Let it do its thing, and bam! working stock F1f.
warning this will delete all user data.
Any questions PM me.
Al
Click to expand...
Click to collapse
oppo f1f from optus australia need qfill firmware
i m from india set come to me for sim unlock
i follow this guide (How To unlock Oppo F1f - Guide unlock network Oppo mobile F1f from youtube) to flash modified firmware
but at the first step i flashed magictricks.zip & set goes to qdloader 9008 mode after reboot
so i need optus australia firmware,thanks in advance
Need some help - Msm8x39DownloadTool.exe not finding phone
Qualcomm HS-USB QSLoader9008 on COM3, according to Device Manager, yet Msm8x39DownloadTool.exe doesn't want to find it at all - Device not connected.
Any help would be really appreciated.
Edit: I have made some progress with some steps not included above.
1) Disable 'Driver Signature Enforcement' in Windows (Google is your friend)
2) Before installing the provided drivers, hold the Volume Up button on your phone, and insert USB from PC > Phone. This places the phone into QHSUSB mode and will be found in Device Manager, under Ports (The Android Bootloader Interface (fastboot) device has an ID of '18D1-D00D', while the QHSUSB device ID is '05C6-9008'.. bingo!).
3) Install the driver as directed. This will change the device from QHSUSB mode to HS-USB QDLoader 9008 on COM3.
Continue with the rest of the guide.
Stock recovery will be returned (v1.2 Rooted - I don't remember this). From here you can install Project Spectrum again, and return back to ColorOS after that.
Hopefully this helps.
tb303lava said:
QDLoader Flasher Drivers and Firmware.
This will unbrick the Oppo F1f even if bootloader has been corrupted.
How to:
Download and extract this archive.
Install the QDLoader driver found in the DRIVER directory of the extracted archive.
Switch phone off, hold Vol-Up and connect USB cable between phone Pc .
Run Msm8x39DownloadTool.exe (in F1EX_11_A.05_160128 directory) as Administrator.
Select phone type (16GB or 32GB)
Choose the port your phone is connected to from the list. (It will be the one which says Com Device as Device Type.
Tick "Reset when .."
Click Start.
Let it do its thing, and bam! working stock F1f.
warning this will delete all user data.
Any questions PM me.
Al
Click to expand...
Click to collapse
I tried this my phone has no Fastboot but recovery says V1.2(Rooted)
I tried this multiple times without luck.
As you still have access to stock recovery, you dont need to use download mode.
Simply put a stock rom zip on your sdcard and flash via the stock recovery. (might have to wipe data also if flashing a different version of the rom).
That will fix your phone.
To get access to fastboot (should you need to flash TWRP recovery), flash magictricks.zip via recovery.
If your phone is so busted you no longer have access to fastboot and recovery it will automatically default to QDloader mode (download mode).
If you want to access download mode while your recovery is still ok, switch phone off, hold Vol-Up (or Vol-down, can't recall) and plug in the usb cable.
AS LONG AS YOU HAVE ACCESS TO RECOVERY, USE THAT TO FLASH A STOCK FIRMWARE, GETTING THE QDLOADER DRIVERS CORRECTLY INSTALLED ON WINDOWS CAN BE RATHER TRICKY.
tb303lava said:
I have the, flashing tool and rom needed to unbrick the f1 from any softbricked state.
Let me know if you still need it, and I'll upload it somewhere and write a quick guide.
Worked for me even after I killed the bootloader.
Click to expand...
Click to collapse
Hey man can you help I've soft bricked my oppo, please need flashing tool and rom
phaw16 said:
I tried this my phone has no Fastboot but recovery says V1.2(Rooted)
I tried this multiple times without luck.
Click to expand...
Click to collapse
HEY BRO HOW DID YOU FIX YOUR F1f SAME PROBLEM HERE I TRY THE STEPS ABOVE BOT INSTALLATION FAILED WHEN FLASHING A ROM please HElp me ver 1.2(rooted)
after flashing my f1f just going to RECOVERY then its auto turn ON and recovery again. bootloop to recovery any fix?
tb303lava said:
QDLoader Flasher Drivers and Firmware.
This will unbrick the Oppo F1f even if bootloader has been corrupted.
How to:
Download and extract this
Install the QDLoader driver found in the DRIVER directory of the extracted archive.
Switch phone off, hold Vol-Up and connect USB cable between phone Pc .
Run Msm8x39DownloadTool.exe (in F1EX_11_A.05_160128 directory) as Administrator.
Select phone type (16GB or 32GB)
Choose the port your phone is connected to from the list. (It will be the one which says Com Device as Device Type.
Tick "Reset when .."
Click Start.
Let it do its thing, and bam! working stock F1f.
warning this will delete all user data.
Any questions PM me.
Al
Click to expand...
Click to collapse
thanks sir, its work
Edabigael said:
after flashing my f1f just going to RECOVERY then its auto turn ON and recovery again. bootloop to recovery any fix?
Click to expand...
Click to collapse
u neeed to flash OTA firmware from recovery, that what i did.. i use F1EX_11_OTA_002_all_201601170010.. put on your sd card and install
After experiencing help from the fantastic meizu community i have decided to make a guide for unbricking this device. This guide is aimed to help people with M3 or M3s that cannot boot. Please only follow these steps to unbrick your device
I am not responsible for bricked devices and exploding phones due to following these steps.
By following these steps you agree that it is you, yourself that chose to follow these steps and I will not take any responsibility for your loss.
Before Starting
1. Can you boot ?
No. Go to Question 2.
Yes. You have came to the wrong place, but feel free to finish reading.2. Do you see the flyme logo when you boot?
Yes. Goto Stuck on Flyme Logo
No. Go to Question 33. Do you see the Meizu Logo and phone reboots over and over
Yes. Go to Testing
No. You flashed a wrong or damaged preloader, chances of unbricking LOW, Go to Sp Flash Tool
Testing
1. Shutdown your phone by holding power button (if you can)
2. Turn on phone with power + volume up until vibrates
I see a flyme logo & recovery options, Goto Stuck on Flyme Logo
Still rebooting, Continue
3. Turn on phone with power + volume down until vibrates
I see the words 'fastboot' at bottom, Go to Sp Flash Tool
I see nothing, your preloader is dead, I cannot help you :crying:.
Sp Flash Tool
Requirements
Micro USB cable (plug phone to pc)
Computer (prefer windows)
Internet to download
1. Download SP_Flash_Tool Link below
2. Download Firmware for your device (latest)
M3 Link https://downloads.meizufans.eu/?dir=m3/firmware/stable
M3s Link https://downloads.meizufans.eu/?dir=m3s/firmware/stable3. Download scatter file 'MT6750_android_scatter.txt' Link below
4. Use sp_flashtool (flashtool.exe)
A. Uncompress SP_Flash_Tool.zip into pc
B. Uncompress 'update.zip' (the firmware)
C. Copy downloaded scatter file 'MT6750_android_scatter.txt' to update folder
D. 'Run as Administrator' flash_tool.exe file
E. Go to the menu Options -> connection - > usb full speed with battery
F. For download agent select DA_PL.BIN from the same folder
G. Load the downloaded scatter file 'MT6750_android_scatter.txt' in update folder
H. Select the 'download only' option (don't press download yet)
I. Untick all the ROM at the bottom.
J. Suggest to select and flash one ROM at a time (except userdata and boot)
recovery
m1img
md1dsp
md1arm7
md3img
lk
lk2
tee1
tee2WARNING do NOT flash 'preloader'
K. Flash by clicking download
L. Turn on and connect phone to computer when vibrate
M. Wait for download to complete, with a green tick.
N. After flashing all ROM, now flash boot.5. Power on your phone.
6. Did it work?
No, Still in reboot cycle, Retry from the top, or use different update.zip
Yes, i have boot to flyme logo but stuck in boot logo, goto Stuck on Flyme Logo
Yes, i have boot to flyme logo and my phone is back, Congrats.
Links
Scatter File: https://drive.google.com/file/d/0B3pRT6ewL6tqeWZhQThFRGVwbE0/view?usp=sharing
SP Flash Tool.zip:
https://drive.google.com/file/d/0B3pRT6ewL6tqSW8tNTQ1OFY2eXc/view?usp=sharing
Stuck on Flyme Logo
You see the flyme logo, and the logo spins couple every couple of sec and waited for over 30 min and still does not boot.
Get in recovery mode, two ways choose one.
Method one (easy)
1. Turn off Phone (Force by holding power button)
2. Turn on Phone with power + volume
If it does not work go to Sp Flash Tool or Method two
Yes, my devices is now in recovery mode, continue the steps, skip Method two
Method two (need computer and harder)
1. Turn on the Phone where the logo spins
2. install adb on computer (link http://forum.xda-developers.com/showthread.php?t=2588979)
3. Plug phone into computer and get drivers for adb
4. Type 'adb devices' in cmd
5. If you get a device in the list continue by Typing 'adb reboot recovery'
'adb devices' not displaying devices (try method one or install driver)
'adb reboot recovery' reboots phone but not to recovery, this confirms that the recovery partition is damaged follow the steps in Sp Flash Tool
Yes, my devices is now in recovery mode, continue the stepsDownload Firmware for your device (latest)
M3 Link https://downloads.meizufans.eu/?dir=m3/firmware/stable
M3s Link https://downloads.meizufans.eu/?dir=m3s/firmware/stable
Plug Phone (in recovery mode) to computer. Copy the downloaded file 'update.zip' into the removable device named 'recovery' (do not unzip)
Tick the top option (system upgrade) and click 'start'
Wait be patient.:fingers-crossed:
Special Thanks
Kokotonix, this is a build up of Kokotonix's post link here: https://forum.meizufans.eu/topic/65...om-bootloop-meizu-logo-and-constant-reboot/11
Meizufans, thanks for this website and everyone in it, where i got most of the information from.
Questions & Answers
Q. Why is my phone unrepairable if i can get to fastboot?
A. By not being able to access fastboot means the preloader partition is damaged and SP Flash Tool will not work.Q. Why is my phones not bootable.
A. It could be caused by many factors but mainly caused by failure in updating firmware due to no battery or incorrect flashing of ROM.Q. Why is it so hard to recover meizu phones
A. Meizu phone uses the new mt67xx which is not supported by MTK droid tool causing problems for users to obtain the scatter file, and also the locked bootloader leading the users not being able to recover the devices the traditionally using fastboot.Q. I have a m3 note can i use this method?
A. Yes if anyone gets there hands on the mt6755 scatter file for meizu. But if not NoQ. HELP ME IT'S NOT WORKING!!!
A. Calm down, follow the steps again, if not comment below.Q. How do i brick my device
A. Get root and flashify and flash a random .img as the kernel. (it works i tried)
Thank you for Reading and wish you for the best on this device.
Comment below for help and also share you success.
reserved
phone is dead(
More info? You lost your preloader
Sent from my M3s using XDA-Developers mobile app
bluecub1st said:
More info? You lost your preloader
Sent from my M3s using XDA-Developers mobile app
Click to expand...
Click to collapse
after installing damaged rom its completely dont turn on only when you plug it to pc it recognize it like MTK Usb Port
logirus said:
after installing damaged rom its completely dont turn on only when you plug it to pc it recognize it like MTK Usb Port
Click to expand...
Click to collapse
Any display? or just black?
What rom did you install? If official you might be able to get a replacement through warranty.
Try SP Flash Tools, instruction in the first post. Chances are low but test if it detects after pressing download.
bluecub1st said:
Any display? or just black?
What rom did you install? If official you might be able to get a replacement through warranty.
Try SP Flash Tools, instruction in the first post. Chances are low but test if it detects after pressing download.
Click to expand...
Click to collapse
i installed from official firmware after installing it rebooted and never turn on no vibration nothing(no warranty i bought it from china on aliexpres) and please look at error ive got sp flash tool
Wrong download agent use the one I used in guide DA_PL.BIN
Sent from my M3s using XDA-Developers mobile app
Looks like it detects it phone u have hope
Sent from my M3s using XDA-Developers mobile app
bluecub1st said:
Wrong download agent use the one I used in guide DA_PL.BIN
Sent from my M3s using XDA-Developers mobile app
Click to expand...
Click to collapse
i used DA_PL.BIN and got the same error, maybe bootloader is locked thats why this error?
The error shows when your device started before the software can flash anything. SP flash tools works with locked bootloader, maybe your preloader is 100% dead
Sent from my M3s using XDA-Developers mobile app
bluecub1st said:
The error shows when your device started before the software can flash anything. SP flash tools works with locked bootloader, maybe your preloader is 100% dead
Sent from my M3s using XDA-Developers mobile app
Click to expand...
Click to collapse
and no way to repair it?:crying: i think im gonna trash this chinese cellphone away and never buy meizu again
No recovery, Fastboot mode is working. What should I do with this error?
Is there a way to work on me with meizu m3 max
Hi,
SPFlashtools fails to connect dead bricked Meizu M3S
Connecting to USB system recognizes as
MediaTek DA USB VCOM Port (COM7)
But other ports including Preloader are not
Do I have any hope to recover phone?
After following these steps, one by one, no matter if all went OK, my phone (m3s) won’t boot and it seems it is completely dead now. It can’t turn on. Power button looks unresponsive. What should I do? Is there any help?
many thanks for this guide @bluecub1st . The problem I have with my M3s is that it boots perfectly fine and works well, i just cannot enter recovery by using Volume + and power, and flashing a new firmware from inside Flyme OS just reboots the phone. I can enter fastboot though no problem, but i tried to do the SP Flash tool method listed and I just get this error message:
ERROR : S_TIMEOUT (0x412)
Any ideas how to fix this and get my recovery back? Really need some help so i can flash flyme 6...
i got error from sp_flashtool
ERROR : STATUS_SEC_DL_FORBIDDEN (0X0020004)
help me please sir
ERROR : STATUS_SEC_WRITE_DATA_NOT_ALLOWED
what to do ?
phone dead... thnks
Hey there... I was trying to get my OnePlus 7 -That I just bought - to a rooted Android 10, updating was the easy part but while trying to "fastboot flash boot twrp.img" I think I somehow got myself stuck making the bootloader (aka fastboot mode ) as my main thing the phone load into and now when I turn on the phone it goes straight to fastboot mode I go and try to "fastboot flash boot twrp.img" it says OKAY twice but I can't load into recovery it takws me back to the fast boot again.... Idk what to do... Help
More into:
I got to the twrp before once during the process and idk why dumb me rebooted when I couldn't access my phone files from pc I wanted to put the image of OOS on a flash drive and via OTG but once I restarted by mistake after that whatever choice I make on the fastboot screen will quickly restart and get back to the same screen, so I can do "fastboot flash boot twrp.img" successfully but I can't load to it I hit reboot to recover or Start or Reboot Bootloader nothing takes me to twrp,
Also when I try "fastboot flash recovery twrp.img"
It says sending recovery okay, writing recovery failed, (remote: (recovery_b) no such partition)
I hope to get any help and I'm sorry if it's an obvious thing I couldn't notice, I'm not the sharpest between my brothers. Momma says. ? with me. I'll appreciate it I promise.
Have you tried this Fastboot ROMS?
Use this:
https://forum.xda-developers.com/oneplus-7/how-to/unbrick-tool-oneplus-7-msmtool-hydrogen-t3953240
After that just put offical Rom zip for your region on internal memory and after that install update. voila
Unbrick tool also available for OxygenOS pie https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325 :good:
Help
same issue with me...whenever i try to recover using fastboot method,it gives an error like product name is sdm845 and required is msmnile
and when i use the msm tool , it gives an error of sahara server....
any help is highly appreciated.
sourabhone said:
same issue with me...whenever i try to recover using fastboot method,it gives an error like product name is sdm845 and required is msmnile
and when i use the msm tool , it gives an error of sahara server....
any help is highly appreciated.
Click to expand...
Click to collapse
"sahara server" problem : disable driver signature / update drivers
https://www.howtogeek.com/167723/ho...8.1-so-that-you-can-install-unsigned-drivers/
Qualcomm dr: https://gsmusbdrivers.com/download/android-qualcomm-usb-driver/
you must to press power button at the same time you plug in usb cable.....keep trying and your computer will start installing drivers for Port 9008
(you can use Google Search for more Info about "sahara" problem)
First of all twrp.img is a recovery image. You would normally use fastboot flash recovery twrp.img.
Secondly, you aren't supposed to flash twrp.img but use fastboot boot twrp.img and then boot to twrp and flash the twrp installer. If you can boot into fastboot, type fastboot boot twrp.img(twrp.70 for android q) and then flash twrp installer and oos. And if you can't boot into recovery you will have to use the msm tool.
daitalos said:
"sahara server" problem : disable driver signature / update drivers
Qualcomm dr:
you must to press power button at the same time you plug in usb cable.....keep trying and your computer will start installing drivers for Port 9008
(you can use Google Search for more Info about "sahara" problem)
Click to expand...
Click to collapse
Thanks daitalos for the reply..
the drivers for 9008 are installed as visible in device manager...
the msm tool shows the phone as connected, when i start the process, it waits for loading firehose binary and waits there for 10 sec.....after that throws error of sahara communication failed (FH:258)
i again tried the volume up + power button combo but to no avail...
also there is no red led light on the phone while charging
sourabhone said:
Thanks daitalos for the reply..
the drivers for 9008 are installed as visible in device manager...
the msm tool shows the phone as connected, when i start the process, it waits for loading firehose binary and waits there for 10 sec.....after that throws error of sahara communication failed (FH:258)
i again tried the volume up + power button combo but to no avail...
also there is no red led light on the phone while charging
Click to expand...
Click to collapse
In device manager you can see "Qualcomm HS -USB QDLoader 9008 (com3 for example) ?
You tried another usb port (?)
in windows 10 it is better for the computer to have the "developer mode" enabled
Close any antivirus temporarily..
Run msm tool as Administrator ofcourse..
(I don't know but If you try with msm tool from here : https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
you should see the models it supports (GM1900, GM1901, GM1903, GM1905)
_I think the problem is on the computer and the communication with the device...
sry for english
Thanks
daitalos said:
In device manager you can see "Qualcomm HS -USB QDLoader 9008 (com3 for example) ?
You tried another usb port (?)
in windows 10 it is better for the computer to have the "developer mode" enabled
Close any antivirus temporarily..
Run msm tool as Administrator ofcourse..
(I don't know but If you try with msm tool from here : h t tp s: // forum . xda-developers . com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
you should see the models it supports (GM1900, GM1901, GM1903, GM1905)
_I think the problem is on the computer and the communication with the device...
sry for english
Click to expand...
Click to collapse
Thank you so much daitalos.
At last i was able to recover my phone from being a paperweight.Used my other laptop and it worked perfectly first time.Maybe my 1st laptop was having some issues.
Hi everyone, I tried to flash a patched Magisk boot image on my Ulefone Armor 8 Pro via fastboot but the device is now stuck in bootloop. I have already read some threads about trying to flash the stock firmware using the proprietary SP Flash Tool, but the phone doesn't remain in download mode for more than a few seconds. I can't even boot in recovery/fastboot mode again to try to flash the stock boot image since the phone just keeps rebooting. If someone could give me a hint it would be really appreciated.
stwm25 said:
Hi everyone, I tried to flash a patched Magisk boot image on my Ulefone Armor 8 Pro via fastboot but the device is now stuck in bootloop. I have already read some threads about trying to flash the stock firmware using the proprietary SP Flash Tool, but the phone doesn't remain in download mode for more than a few seconds. I can't even boot in recovery/fastboot mode again to try to flash the stock boot image since the phone just keeps rebooting. If someone could give me a hint it would be really appreciated.
Click to expand...
Click to collapse
You need write the model of device.
Currently I know of 3 models: 4GB RAM(Armor 8); 6&8GB RAM(Armor 8 Pro).
So with the correct stock ROM you can flash the device.
To use SPFT you need to specify which OS you have: Linux; Win7_8_10; other
This is to know if you actually installed the USB MTK drivers correctly and if further action is needed.
Also, write if you have the device with the bootloader locked or unlocked.
I have the 6GB RAM and have downloaded a time ago the GQ3090RH3_KSX70H_Ulefone_20210902_V01(Non-EU).zip file aka stock ROM. That's aka Non_EEA model. In the Ulefone site have SP_MDT_exe_v3.2048.02.00(Client).zip aka flash tool.
You used that tool?
Thanks for the reply. I have the model with 6GB of RAM as well and I am currently trying to recover my phone by using Windows 11 in a virtual machine. The bootloader is unlocked and I tried to flash the EU version of the stock ROM (GQ3090RH3_KSX70H_Ulefone_EEA_20210902_V01(EU).zip) by using SP_MDT_exe_v3.2048.02.00(Client).zip (after installing the required drivers), but as I have already specified I can't boot in download mode for more than a few seconds. My computer recognises the device as "MediaTek MT65xx Preloader" but the phone immediately reboots and I am not able to flash the stock ROM.
stwm25 said:
Thanks for the reply. I have the model with 6GB of RAM as well and I am currently trying to recover my phone by using Windows 11 in a virtual machine. The bootloader is unlocked and I tried to flash the EU version of the stock ROM (GQ3090RH3_KSX70H_Ulefone_EEA_20210902_V01(EU).zip) by using SP_MDT_exe_v3.2048.02.00(Client).zip (after installing the required drivers), but as I have already specified I can't boot in download mode for more than a few seconds. My computer recognises the device as "MediaTek MT65xx Preloader" but the phone immediately reboots and I am not able to flash the stock ROM.
Click to expand...
Click to collapse
Win11 is not good to use SP tool.
Maybe using Win10?!
"MediaTek MT65xx Preloader" is normal but need installing drivers correctly. You can try this: Driver_Auto_Installer_EXE_v5.1632.00.zip - 8.8MB
Reboot VM and try with the device turned off!
For using SPFT or SP_MDT your device not need in the bootloader mode. Device turned off - conect USB - look about USB PORT COM - Scan - Start All
If you not know how to do so Read Upgrade software guide for factory assembly line.pdf
Here file and more about: Upgrade tools and USB driver - Armor 8 Pro
___________________________
UP: Maybe SP need more than you know.
I used the SPFT and worked good to me with Win10.
May be SPFT can help more than SP: SP_Flash_Tool_v5.2124_Win
For using SPFT your device not need in the bootloader mode. Device turned off - open sxcatter file - look for Download Only option (NOT use FORMAT+....!!!!) - now with the device turned off conect USB - press DOWNLOAD (Ctrl + D).
Well, you saved my phone. Thanks for the help, I really appreciate that. I installed Windows 10 and the drivers you linked me and via SP Flash Tool I managed to flash the stock ROM after connecting the device with a USB cable. Thanks again.
How do I get this phone into download mode? Cannot seem to get it to flash
I've followed your tips but I cannot get the phone recognized by the flash tool.
I've collected full details here: https://android.stackexchange.com/questions/248035/bootloop-in-ulefone-armor-8-pro
Can SPFT be used with Linux?
jlbradl said:
How do I get this phone into download mode? Cannot seem to get it to flash
Click to expand...
Click to collapse
I know the fastboot mode. It is entered by pressiong Volume + and power button simultaneously.
stwm25 said:
Thanks for the reply. I have the model with 6GB of RAM as well and I am currently trying to recover my phone by using Windows 11 in a virtual machine. The bootloader is unlocked and I tried to flash the EU version of the stock ROM (GQ3090RH3_KSX70H_Ulefone_EEA_20210902_V01(EU).zip) by using SP_MDT_exe_v3.2048.02.00(Client).zip (after installing the required drivers), but as I have already specified I can't boot in download mode for more than a few seconds. My computer recognises the device as "MediaTek MT65xx Preloader" but the phone immediately reboots and I am not able to flash the stock ROM.
Click to expand...
Click to collapse
did you fix your phone?
Alex76rod said:
did you fix your phone?
Click to expand...
Click to collapse
i have the same problem.
it wont stay turn off
so the sp tool can't flash it.
Hi , yesterday I was flashing the MIUI official rom via the Spflash Tool and I unplugged it accidentally , after that I tried to reconnect it and it appear "Unknown USB Device (Descriptor Request Failed)" in the device manager. Is this fixable with software such as hydra , spflash tool or reinstalling the drivers? (Sorry for my bad English.)
phone is booting to OS or did you brick it?
yaro666 said:
phone is booting to OS or did you brick it?
Click to expand...
Click to collapse
I guess its bricked , I was flashing the miui 12 via the spflash tool but I unplugged the cable accidentally so now it became Unknown USB Device in the device management.
does it boot to fastboot?
yaro666 said:
does it boot to fastboot?
Click to expand...
Click to collapse
no , it even can't boot to the MediaTek mode (the mode which uses spflash tool).
then you bricked it. try edl or seqrch for someone with box
Okay so now the unknown usb device problem is fixed but theres a new problem. When I use the MediaTek EDL mode to flash the MIUI , it appeared a error "ext ram expectioned". It stucked at the "Download DA" process and after 60s the device disconnected from my pc and appeared that error.