hi, today i tried to install twrp on my phone but i got an error written in the attached image, any help?
Mmm, do they mean the AVB0 footer on the recovery image?
How did you flash the TWRP?
Was what you wrote as big as the partition?
Renate said:
Mmm, do they mean the AVB0 footer on the recovery image?
How did you flash the TWRP?
Was what you wrote as big as the partition?
Click to expand...
Click to collapse
i flashed the twrp with odin
Renate said:
Mmm, do they mean the AVB0 footer on the recovery image?
How did you flash the TWRP?
Was what you wrote as big as the partition?
Click to expand...
Click to collapse
Therefore? how can I do?
gerryscottiano said:
I flashed the twrp with odin
Click to expand...
Click to collapse
So, how big was the file that you flashed?
If what you flashed is smaller than the partition then the old AVB0 footer from the stock recovery is there.
That wouldn't agree with the position of the new AVB0 header for TWRP.
Or maybe you're supposed to defeat AVB somewhere?
See: https://android.googlesource.com/platform/external/avb/+/master/libavb/avb_footer.h
Disclaimer: I don't know Samsung and I've never run into trouble with AVB.
Renate said:
So, how big was the file that you flashed?
If what you flashed is smaller than the partition then the old AVB0 footer from the stock recovery is there.
That wouldn't agree with the position of the new AVB0 header for TWRP.
Or maybe you're supposed to defeat AVB somewhere?
See: https://android.googlesource.com/platform/external/avb/+/master/libavb/avb_footer.h
Disclaimer: I don't know Samsung and I've never run into trouble with AVB.
Click to expand...
Click to collapse
the file weighs 50 kb (I don't know what to do because it's the first time I enter the world of modding)
@gerryscottiano instead of asking this question in a new thread, it would be a better idea to ask in the thread where you got TWRP from.
Also, the TWRP image for this device is about 42MB, not 50KB.
i was wrong it is 50 mb, however i downloaded it on twrp official site
gerryscottiano said:
i was wrong it is 50 mb, however i downloaded it on twrp official site
Click to expand...
Click to collapse
Link for the file please and describe how you flashed it
V0latyle said:
Link for the file please and describe how you flashed it
Click to expand...
Click to collapse
https://dl.twrp.me/a30s/ the 3.7.0.img.tar
gerryscottiano said:
https://dl.twrp.me/a30s/ the 3.7.0.img.tar
Click to expand...
Click to collapse
Ok, and how did you flash it?
V0latyle said:
Ok, and how did you flash it?
Click to expand...
Click to collapse
so, i downloaded odin3, i put the file in the ap and i removed the auto reboot option and i connected the phone in download-mode
gerryscottiano said:
so, i downloaded odin3, i put the file in the ap and i removed the auto reboot option and i connected the phone in download-mode
Click to expand...
Click to collapse
Sounds good so far, then you try to reboot into recovery?
What exact version of Odin, and where did you download it from?
V0latyle said:
Sounds good so far, then you try to reboot into recovery?
What exact version of Odin, and where did you download it from?
Click to expand...
Click to collapse
when I try to reboot into recovery it gives me the error, the odin version is 3.14.4 and I installed it from here: https://samfw.com/Odin/Samfw.com_Odin3_v3.14.4.zip
gerryscottiano said:
when I try to reboot into recovery it gives me the error, the odin version is 3.14.4 and I installed it from here: https://samfw.com/Odin/Samfw.com_Odin3_v3.14.4.zip
Click to expand...
Click to collapse
AFAIK there is no 3.14.4, the latest Odin is 3.14.1.
I recommend you get rid of that and use the latest from this thread
V0latyle said:
AFAIK there is no 3.14.4, the latest Odin is 3.14.1.
I recommend you get rid of that and use the latest from this thread
Click to expand...
Click to collapse
is a modded version
gerryscottiano said:
is a modded version
Click to expand...
Click to collapse
That's fine, but what is in the XDA thread is what we consider safest.
V0latyle said:
AFAIK there is no 3.14.4, the latest Odin is 3.14.1.
I recommend you get rid of that and use the latest from this thread
Click to expand...
Click to collapse
I have a problem, I was trying to flash the recovery with the odin3 that you sent me but the oem block has been activated again and now that I have accepted to delete all the data it doesn't work for me in the firmware because there is the error of the recovery, how do I do?
gerryscottiano said:
I have a problem, I was trying to flash the recovery with the odin3 that you sent me but the oem block has been activated again and now that I have accepted to delete all the data it doesn't work for me in the firmware because there is the error of the recovery, how do I do?
Click to expand...
Click to collapse
You didn't lock the bootloader again, did you?
Related
After flashing paranoid android rom 5.1 on my nexus 5 i tried to flash gapps but i had an error executing updater binary in zip. What shall i do?
TWRP recovery?
i got 2.8.6.0
GiwrgosP- said:
i got 2.8.6.0
Click to expand...
Click to collapse
Then update it.
Primokorn said:
Then update it.
Click to expand...
Click to collapse
Well im not sure about how to do that. Shall i just connect my phone with my pc and via fastboot just flash the new one (like i did with this one?). I mean im not sure on how to flash new recovery when i already got a custom one..
GiwrgosP- said:
Well im not sure about how to do that. Shall i just connect my phone with my pc and via fastboot just flash the new one (like i did with this one?). I mean im not sure on how to flash new recovery when i already got a custom one..
Click to expand...
Click to collapse
Yes fastboot flash recovery recovery.img.
But TWRP can flash recovery.img itself. Switch to IMG instead of ZIP in the Install menu.
Primokorn said:
Yes fastboot flash recovery recovery.img.
But TWRP can flash recovery.img itself. Switch to IMG instead of ZIP in the Install menu.
Click to expand...
Click to collapse
with fastboot flash recovery recovery.img will i lose my backup? Or everything will be fine?
GiwrgosP- said:
with fastboot flash recovery recovery.img will i lose my backup? Or everything will be fine?
Click to expand...
Click to collapse
Nothing You can flash it. Your data will still be there.
Primokorn said:
Nothing You can flash it. Your data will still be there.
Click to expand...
Click to collapse
Thanks
GiwrgosP- said:
Thanks
Click to expand...
Click to collapse
BTW update your bootloader while you are at it
Primokorn said:
BTW update your bootloader while you are at it
Click to expand...
Click to collapse
I didnt catch that..
GiwrgosP- said:
I didnt catch that..
Click to expand...
Click to collapse
What is your bootloader version? It should be HHZ12h if you are running Android 5.1.1. It can create issues if you still have an old one.
Primokorn said:
What is your bootloader version? It should be HHZ12h if you are running Android 5.1.1. It can create issues if you still have an old one.
Click to expand...
Click to collapse
Yeah i got HHZ12h. Would you like to help me with that? What shall i do?
GiwrgosP- said:
Yeah i got HHZ12h. Would you like to help me with that? What shall i do?
Click to expand...
Click to collapse
Nothing to do since you already have the good one
Primokorn said:
Nothing to do since you already have the good one
Click to expand...
Click to collapse
Oh yeah i didnt notice exactly what you said.. I thought you said that i should have had another bootloader.. Thanks for helping me though!
hi all i don't know if this is the right section, in case i'm sorry but i'm a bit desperate x.x this is my problem:
i've a ze551ml deluxe version while flashing some things (supersu,kernel ecc..) i've flashed also a file called splashscreen.img(i don't know if it's the cause of my problem) but after that my phone It starts only in fastboot mode recovery doesn't work,i've tried to flash some img files like (boot.img,recovery ecc..) but nothing it's happend, if try to flash a raw file by asus flash tool give an error while flashing "remote: not allowed to flash this partition" i don't know what to do please help me :'(
UserName_K said:
hi all i don't know if this is the right section, in case i'm sorry but i'm a bit desperate x.x this is my problem:
i've a ze551ml deluxe version while flashing some things (supersu,kernel ecc..) i've flashed also a file called splashscreen.img(i don't know if it's the cause of my problem) but after that my phone It starts only in fastboot mode recovery doesn't work,i've tried to flash some img files like (boot.img,recovery ecc..) but nothing it's happend, if try to flash a raw file by asus flash tool give an error while flashing "remote: not allowed to flash this partition" i don't know what to do please help me :'(
Click to expand...
Click to collapse
Which partition has been flashed with "splashscreen.img" and whioch tool did you use for it?
LS.xD said:
Which partition has been flashed with "splashscreen.img" and whioch tool did you use for it?
Click to expand...
Click to collapse
i've flashed by recovery so i don't know:crying:
there is a way for fix it? =(
UserName_K said:
i've flashed by recovery so i don't know:crying:
there is a way for fix it? =(
Click to expand...
Click to collapse
Do you have a link to the file? You can't flash .img files directly by recovery...
LS.xD said:
Do you have a link to the file? You can't flash .img files directly by recovery...
Click to expand...
Click to collapse
it was a mistake :crying: anyway i don't have the link for splashscreen.img but if i remember well i've download it when i've unlocked the bootloader, i can solve in some way?Even by lost all data,all solutions are good !
UserName_K said:
it was a mistake :crying: anyway i don't have the link for splashscreen.img but if i remember well i've download it when i've unlocked the bootloader, i can solve in some way?Even by lost all data,all solutions are good !
Click to expand...
Click to collapse
What happens when you flash boot.img + recovery.img using fastboot? Any error messages?
LS.xD said:
What happens when you flash boot.img + recovery.img using fastboot? Any error messages?
Click to expand...
Click to collapse
just try for security , both operation working fine no error
UserName_K said:
just try for security , both operation working fine no error
Click to expand...
Click to collapse
And once done you can't boot stock recovery?
LS.xD said:
And once done you can't boot stock recovery?
Click to expand...
Click to collapse
nope, boot always in fastboot mode
UserName_K said:
nope, boot always in fastboot mode
Click to expand...
Click to collapse
Are you using the .img files from latest firmware UL-Z00A-WW-4.21.40.184-user ??
LS.xD said:
Are you using the .img files from latest firmware UL-Z00A-WW-4.21.40.184-user ??
Click to expand...
Click to collapse
just tried and nothing seems changed
UserName_K said:
just tried and nothing seems changed
Click to expand...
Click to collapse
Download latest TWRP
Try to boot is as followed:
fastboot boot twrp-3.0.2-0-Z00A.img
LS.xD said:
Download latest TWRP
Try to boot is as followed:
fastboot boot twrp-3.0.2-0-Z00A.img
Click to expand...
Click to collapse
done but it's the same, boot in fastboot mode i'm really confused never happend something like this
UserName_K said:
done but it's the same, boot in fastboot mode i'm really confused never happend something like this
Click to expand...
Click to collapse
I'm really curious what file you flashed to which partition, its awkward that you can't exactly remember what you did to make the phone beeing like this.
Just by the way: is your bootloader still unlocked?
LS.xD said:
I'm really curious what file you flashed to which partition, its awkward that you can't exactly remember what you did to make the phone beeing like this.
Just by the way: is your bootloader still unlocked?
Click to expand...
Click to collapse
mmh i've follow the guide for bootloader here http://forum.xda-developers.com/zenfone2/general/root-newbie-root-instructions-zenfone-2-t3114063
and probably here i've get the splashscreen, when you unlock the bootloader the splashscreen become white, the file img restore the default asus's splashscreen anyway how can check the status of bootloader?
UserName_K said:
mmh i've follow the guide for bootloader here http://forum.xda-developers.com/zenfone2/general/root-newbie-root-instructions-zenfone-2-t3114063
and probably here i've get the splashscreen, when you unlock the bootloader the splashscreen become white, the file img restore the default asus's splashscreen anyway how can check the status of bootloader?
Click to expand...
Click to collapse
I just minded that your device has a own section.
UNBRICK GUIDE
Your problem should be posted HERE
LS.xD said:
I just minded that your device has a own section.
UNBRICK GUIDE
Your problem should be posted HERE
Click to expand...
Click to collapse
ok i'll try thanks
Just here to share the link
https://twrp.me/oneplus/oneplus6.html
Over to you developers...:good:
Can I update to official TWRP with the unofficial TWRP?
ah great!
Awesome
How to flash it?
Sconny said:
How to flash it?
Click to expand...
Click to collapse
I flashed it, but stock is not booting with magisk
djrocks said:
Just here to share the link
https://twrp.me/oneplus/oneplus6.html
Over to you developers...:good:
Click to expand...
Click to collapse
Sconny said:
How to flash it?
Click to expand...
Click to collapse
Literally all you have to do is click the link in the original post...
b.huss2 said:
Literally all you have to do is click the link in the original post...
Click to expand...
Click to collapse
Do you think I can update to official with the unofficial TWRP?
No MTP
DocRambone said:
No MTP
Click to expand...
Click to collapse
You can use adb push xxx /sdcard command,
habobababo said:
I flashed it, but stock is not booting with magisk
Click to expand...
Click to collapse
hmm i dont know what you did, but its working great here.
1 . boot official twrp
2. flash TWRP installer
3. reboot to recovery (dont know if its necessary)
4. flashed magisk
5. reboot and you are done
Kollachi said:
hmm i dont know what you did, but its working great here.
1 . boot official twrp
2. flash installer
3. reboot to recovery (dont know if its necessary)
4. flashed magisk
5. reboot and you are done
Click to expand...
Click to collapse
flash installer?you mean magisk?
Kevinkuensken said:
flash installer?you mean magisk?
Click to expand...
Click to collapse
No the twrp zip from official Page
Magisk was the Key, its booting
Kevinkuensken said:
flash installer?you mean magisk?
Click to expand...
Click to collapse
no the twrp installer.
I installed the official TWRP and I still have the same problem to make a system backup, specifically with the partition /data always gives error:
createtarfork () process ended with error 255
please someone knows the reason?
If i update OOS by flashing the OOS zip , do I just install twrp image after I install oos, or the do i install the image and zip after a update?
xino22 said:
I installed the official TWRP and I still have the same problem to make a system backup, specifically with the partition /data always gives error:
createtarfork () process ended with error 255
please someone knows the reason?
Click to expand...
Click to collapse
its because you have used parallel apps. i had the same problem.
clean flash fix that error.
xino22 said:
I installed the official TWRP and I still have the same problem to make a system backup, specifically with the partition /data always gives error:
createtarfork () process ended with error 255
please someone knows the reason?
Click to expand...
Click to collapse
Well known issue. Connected to parallel apps
Sent from my OnePlus6 using XDA Labs
lollyjay said:
Well known issue. Connected to parallel apps
Sent from my OnePlus6 using XDA Labs
Click to expand...
Click to collapse
Kollachi said:
its because you have used parallel apps. i had the same problem.
clean flash fix that error.
Click to expand...
Click to collapse
If I try this application to duplicate applications but I uninstalled it and I still have the problem, how can I solve it?
https://play.google.com/store/apps/details?id=com.oasisfeng.island
xino22 said:
If I try this application to duplicate applications but I uninstalled it and I still have the problem, how can I solve it?
https://play.google.com/store/apps/details?id=com.oasisfeng.island
Click to expand...
Click to collapse
Only a cleanup of the 999 files will solve the problem
They don't go away
Sent from my OnePlus6 using XDA Labs
I got a Motorola G8 Power, and as far as I know, it will not get Android 12, so I was wondering if there is already any Android 12 stable GSI (because I doubt that there are any ROMS, and even less likely for this device).
Also, if I installed it, would I get any OTA updates? What about Google Play Services? Would it be better to just install a ROM like HavocOS (GSI) and wait for them to release the Android 12 update?
Thanks in advance.
Apparently now their is. Check https://ci.android.com/builds/branches/aosp-android12-gsi/grid?
Tell me how it goes!
KevinKraze said:
Apparently now their is. Check https://ci.android.com/builds/branches/aosp-android12-gsi/grid?
Tell me how it goes!
Click to expand...
Click to collapse
Thanks! Will try to flash it and I'll tell you
ByteSeb said:
Thanks! Will try to flash it and I'll tell you
Click to expand...
Click to collapse
Did it work?
kelvinchinedu said:
Did it work?
Click to expand...
Click to collapse
It did not work for me. I just think that this has to do with Android 11, as I tried to install other ROMS and none of them worked. Well, one did, but it was stuck in a bootloop. I am planning on trying again, though.
When u xtract the zip file did u get system img
kelvinchinedu said:
When u xtract the zip file did u get system img
Click to expand...
Click to collapse
Yes. You have to get the version that corresponds to your phone. For example, my Moto G8 Power is an ARM64 device, so I visited this website and downloaded this zip file containing the boot images, the system image and the vbmeta image.
How did u flash it
kelvinchinedu said:
How did u flash it
Click to expand...
Click to collapse
I am trying to flash it via Fastboot, so I rebooted my phone into the bootloader and entered the commands:
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
It has not worked for me, as I get the "Preflash validation failed" error, but it could work for you
I have latest twrp I can use it.
kelvinchinedu said:
I have latest twrp I can use it.
Click to expand...
Click to collapse
Yes, just flash the images one by one instead of flashing the zip
How?
One by one
kelvinchinedu said:
How?
One by one
Click to expand...
Click to collapse
In TWRP, Go to Install, then tap on "Install Image" and select the images
What about the vendor am I going to flash it?
please help
im looking for the stock firmware for my GT-n8013?
tried sammobile but waste of time..
darko454 said:
please help
im looking for the stock firmware for my GT-n8013?
tried sammobile but waste of time..
Click to expand...
Click to collapse
I would recomment to use the frija download tool, you can find it here on xda (or google it).
html6405 said:
I would recomment to use the frija download tool, you can find it here on xda (or google it).
Click to expand...
Click to collapse
thank you but
Could not fetch info for GT-N8013/XAA. Please verify the input or use manual info
Could not fetch info for GT-N8013/XAS. Please verify the input or use manual info
pleasehelp
darko454 said:
thank you but
Could not fetch info for GT-N8013/XAA. Please verify the input or use manual info
Could not fetch info for GT-N8013/XAS. Please verify the input or use manual info
pleasehelp
Click to expand...
Click to collapse
Never mind i figured it out ..
I have inserted CODE_N8013UEUCOI1_813049_REV00_user_low_ship.tar.md5 on AP slot and hit start everything passed but my gt-n8013 keeps bootlooping
any ideas?
darko454 said:
Never mind i figured it out ..
I have inserted CODE_N8013UEUCOI1_813049_REV00_user_low_ship.tar.md5 on AP slot and hit start everything passed but my gt-n8013 keeps bootlooping
any ideas?
Click to expand...
Click to collapse
Try to boot into the recovery mode and do a factory reset,
or download a 4 part firmware (enable binary nature).
Thanks but frija download tool has only 3 files, where can i get 4 part firmware?
How do i enable binary nature?
If i boot to recovery It boots to TWRP
thanks
darko454 said:
Thanks but frija download tool has only 3 files, where can i get 4 part firmware?
Click to expand...
Click to collapse
Thats ok, because it doesn't has a modem.
darko454 said:
How do i enable binary nature?
Click to expand...
Click to collapse
In the settings of frija, but if you have already a 3 part firmware...
darko454 said:
If i boot to recovery It boots to TWRP
Click to expand...
Click to collapse
Ok and did you try to do a factory reset?
html6405 said:
Thats ok, because it doesn't has a modem.
In the settings of frija, but if you have already a 3 part firmware...
Ok and did you try to do a factory reset?
Click to expand...
Click to collapse
I tried to flash in each respective slot
Yes I tried to factory reset and I tried to flash a recent TWRP but it always boot in the same recovery
Please help
darko454 said:
Yes I tried to factory reset and I tried to flash a recent TWRP but it always boot in the same recovery
Click to expand...
Click to collapse
This means that your eMMC is locked and needs to be replaced.
html6405 said:
This means that your eMMC is locked and needs to be replaced.
Click to expand...
Click to collapse
How do I replace the eMMC?
Thanks
darko454 said:
How do I replace the eMMC?
Thanks
Click to expand...
Click to collapse
You would have todo something similiar like here for the i9300:
I'm doing this as a professional, maybe there's someone else in your country who could do this?