my j3 has a broken home button and i tried a custom kernel that supposedly works with android 9 but instead it broke both my recovery and the os. i can't boot into download mode since it thinks my home button is always pressed in because of water damage a few months ago. can anyone help?
Related
Hi
I cannot get my Samsung Galaxy Tab 7.0 Plus (GT-P6200) to boot in recovery mode.
I tried the following:
1) Switch off the Tab.
2) Press the Power + Volume Up buttons simultaneously until I see the "Samsung Galaxy Tab 7.0 Plus" screen, then release the Power button and keep pressing the Volume Up button. The tab then get's stuck on the Samsung screen, even if I release the Volume Up button. It stays on this screen indefinitely, only option is to reboot by keeping the power button pressed for 5 seconds.
Any help will be appreciated.
Thanks!
same issue
I am having the same issue as well. My tab gets stuck on the "Samsung Galaxy Tab 7.0 Plus" screen and does not move on from that. When i try to boot in recovery mode the screen is just black and slightly illuminated. Please help
Ces123 said:
Hi
I cannot get my Samsung Galaxy Tab 7.0 Plus (GT-P6200) to boot in recovery mode.
I tried the following:
1) Switch off the Tab.
2) Press the Power + Volume Up buttons simultaneously until I see the "Samsung Galaxy Tab 7.0 Plus" screen, then release the Power button and keep pressing the Volume Up button. The tab then get's stuck on the Samsung screen, even if I release the Volume Up button. It stays on this screen indefinitely, only option is to reboot by keeping the power button pressed for 5 seconds.
Any help will be appreciated.
Thanks!
Click to expand...
Click to collapse
Same problem
any help ???
On which verison thar ur on???? have u tried to wiping data in stock recovery
??
same problem I'm having with my Samsung Gt-p6200, it just boot-loops to the "samsung galaxy tab 7.0" boot loading screen and hangs.. these happened after i flashed my firmware from stock honeycomb to jellybean(the austria firmware, i think that's been posted in this forum).
here's what happened before the problem:
-I flash the stock honeycomb firmware with the jellybean one that i found here..
-after i flashed using ODIN, the new firmware works great, i was even informed that i have free 50GB worth of dropbox space,
the file was named P6200XXMC3_P6200OXAMC3_ATO
- I have used it for a day, until the battery drains and i have to charge, but when i opened it again, it already does this "boot loop" problem
- i have tried flashing CWM with ODIN(as i've read here somewhere that it might help) and do that wipe cache and factory reset thing but that didnt help solved the problem.
hope anyone could help me, im also thinking flashing it back to it's original stock firmware but I dont have a backup of that and I dont know where to get one, I've been searching the net for two days for that stock rom but all i found are the new jellybean ones and some old ones but is uploaded to hotfile which is now deleted or locked.
I hope you guys could help me out and thanks in advance!
try flashing a new , latest firmware on odin
just try it.
ovox0 said:
I am having the same issue as well. My tab gets stuck on the "Samsung Galaxy Tab 7.0 Plus" screen and does not move on from that. When i try to boot in recovery mode the screen is just black and slightly illuminated. Please help
Click to expand...
Click to collapse
Hello guys! Im also having this same issue.
*Using the same firmware that was posted here in xda because i was having trouble downloading those official jellybean firmwares
*The battery got drained
then if i charge it, it will remain in a "blank slightly illuminated screen"
* after a few munutes, the tab gets really warm.
*but if i dont charge it, it will get drained again because it keeps on turning on itself back to this time to the "galaxy tab plus screen"
I cant access recovery mode.
I can access odin mode and can flash successfully with cwm or the same firmware back but the problem still persist.
I havent tried other firmwares though.
4 days passed already and i cant figure this out
Please help
So I had this happen to me yesterday, where it rebooted randomly on me, only to freeze on the Galaxy Tab 7.0 Plus screen. I had custom recovery (TWRP) don't know if that matters, but I was able to access it by holding Power+UpVol but keep it held. It would freeze on the same spot but since I was still holding the keys it reboots a second time and this time it would go into recovery.
I then wipes cache and dalvik, no go. Sadly did a full wipe. Still no going past the tab plus text. So I flash MF1 official 4.1.2 firmware (I was previously on 4.1.2 UK official) still no go. Put in latest 2.8 TWRP and booted into it still with some trouble as I mentioned above. Did another wipe and it then hung on blank screen or so I thought. Took a long time to boot and after a long time, and the Android is upgrading message, by some weird chance I was on the MF1 official rom but all my apps settings everything was saved.
Working 100% now and I still don't really know what the hell happened. But if this helps anyone then all the better!
My samsung p6200 is woking almost fine but i am not able to go into the download mode when i press volume down button and power the screen is at samsung logo it stays for a while and then it restarts from there,its the stock rom that's messd up i belive any help how to go into downlod mose other way would b apriciated
hello everyone,
i have no usable nexus s since 2 weeks ( im using a terrible NOKIA phone : http://upload.wikimedia.org/wikipedia/commons/7/7f/Nokia_2600.png )
, something like one month ago my power button went down, i was using "volume wake" feature on a rom i dont remember, it was working perfectly i just had to remove the battery to turn it off and when i put the battery back it was booting automatically. I had no problems ...
...since i decided to flash a devil kernel (via twrp touch recovery) but i get an infinite boot, my phone is stuck on boot logo.
I cant access manually to recovery cause of the non working power button.
Is there a way to get my nexus working again, how, and is there a way to extract my photos ( a lot of photos ), to buy a power button( i live in france) ?
im using kubuntu 12.10 ( i can find a windows pc if needed )
EDIT : I just fixed the power button with an electrical cleaner so no problems now
Hi
I have been helping a friend repair their phone after it got water damaged
THe battery has been replaced and the phone boots and can go into Android
I have since Unlocked the bootloader
Installed TWRP
Rooted it
Installed a Cusom Rom
And installed a Custom Kernel with no issue.
So In my eyes this Phone is 100% working
The Problem i am stuck with is that whenever the phone is turned on it goes straight into the Bootloader screen and the Option bit on the top (Start, Recovery, Reboot BootLoader and Power off)
Constantly scrolls through each option as though the volume key is being pressed
if i press the power button as each option appears the phone will boot into the option i have chosen
While in Android all the buttons work correctly.
Vol up and Down and the power either going to sleep or bringing up the power menu.
Any ideas would be a great help
Probably HW related, but not sure
Sirklip said:
Hi
I have been helping a friend repair their phone after it got water damaged
THe battery has been replaced and the phone boots and can go into Android
I have since Unlocked the bootloader
Installed TWRP
Rooted it
Installed a Cusom Rom
And installed a Custom Kernel with no issue.
So In my eyes this Phone is 100% working
The Problem i am stuck with is that whenever the phone is turned on it goes straight into the Bootloader screen and the Option bit on the top (Start, Recovery, Reboot BootLoader and Power off)
Constantly scrolls through each option as though the volume key is being pressed
if i press the power button as each option appears the phone will boot into the option i have chosen
While in Android all the buttons work correctly.
Vol up and Down and the power either going to sleep or bringing up the power menu.
Any ideas would be a great help
Click to expand...
Click to collapse
after 3 years did u find any solution. exactly same issue happen today :crying:
Try updating to the latest bootloader. But I assume the buttons get stuck sometimes. Try smacking the buttons s a couple of times. Hope that works.
Just wanted to share my experience rooting my S6 successfully.
Don't know yet if I have the deep sleep bug yet - but I will update this thread after a few days of use.
Model: S6 64GB SM-G920i
Firmware: G920IDVU1AOD1 (Updated OTA before rooting)
Steps I tried:
- Used Odin v3.10.6
1. Tried flashing twrp-2.8.6.0-zeroflte.img.tar.
This failed. When trying to go into recovery mode (volume up + home + power button), I just went to normal recovery.
My phone was still functional at this point - but no custom recovery and no root.
2. Tried flashing "CF-Auto-Root-zeroflte-zerofltedv-smg920i.tar.md5"
This resulted in my phone being stuck on the black and white Galaxy S6 boot screen.
Luckily I could still get into download mode (volume down + home + power button). I had to do volume down + power for 6 seconds to hard reset the phone as you can no longer pull the battery out.
3. Then i tried flashing "CF-Auto-Root-zerofltetmo-zerofltetmo-smg920t.tar.md5"
The phone rebooted, then rebooted by itself a 3 times (without reaching launcher), then finally the launcher/lock screen came up!
I downloaded Root Checker and confirmed that I now have root!
I hope my experience can help others out there....
Happy rooting!
Awesome thanks for sharing this tip.
Do post if you have any unusual battery drain with the sleep mode bug. Hopefully it doesn't impact you and us.
Sent from my SM-G920I using XDA Free mobile app
Mine's got deep sleep issue after rooting
1ns4nity said:
Just wanted to share my experience rooting my S6 successfully.
Don't know yet if I have the deep sleep bug yet - but I will update this thread after a few days of use.
Model: S6 64GB SM-G920i
Firmware: G920IDVU1AOD1 (Updated OTA before rooting)
Steps I tried:
- Used Odin v3.10.6
1. Tried flashing twrp-2.8.6.0-zeroflte.img.tar.
This failed. When trying to go into recovery mode (volume up + home + power button), I just went to normal recovery.
My phone was still functional at this point - but no custom recovery and no root.
2. Tried flashing "CF-Auto-Root-zeroflte-zerofltedv-smg920i.tar.md5"
This resulted in my phone being stuck on the black and white Galaxy S6 boot screen.
Luckily I could still get into download mode (volume down + home + power button). I had to do volume down + power for 6 seconds to hard reset the phone as you can no longer pull the battery out.
3. Then i tried flashing "CF-Auto-Root-zerofltetmo-zerofltetmo-smg920t.tar.md5"
The phone rebooted, then rebooted by itself a 3 times (without reaching launcher), then finally the launcher/lock screen came up!
I downloaded Root Checker and confirmed that I now have root!
I hope my experience can help others out there....
Happy rooting!
Click to expand...
Click to collapse
Help Me A Lot... Thanks
Thank you so much. This saved my brand new Samsung S6.
For anyone in Australia on Telstra, our S6 build number is: LRX22G.G9X0IDVU1AOD1, at least mine is and I went through exactly the same process as OP.
I can't believe the root for the G920I is labelled as such on the CF-Auto-Root Repository when it bricks this version of the G920I.
Thanks again...:good::good::good::good::good::good::good:
I am running a SM-G920i with a build number LRX22G.G920IDVU1BOE3 (New Zealand-Spark) and can confirm the above fix does indeed work. I was tearing my hair out after using the Autoroot download for the 920i and it reporting as successful in Odin but then remaining stuck on the blue download screen and when hard rebooted using the volume buttons and power button it remained stuck on the samsung startup screen.
I Flashed the 920T version in Odin and the same thing appeared to happen, successful install reported, blue download screen remained, but when I did the hard reboot it went into recovery, installed root as I expected and after rebooting a couple of times is fully operational.
Thanks for the fix (that sinking feeling that occurs when something goes wrong with your new toy has gone).
1ns4nity said:
Just wanted to share my experience rooting my S6 successfully.
Don't know yet if I have the deep sleep bug yet - but I will update this thread after a few days of use.
Model: S6 64GB SM-G920i
Firmware: G920IDVU1AOD1 (Updated OTA before rooting)
Steps I tried:
- Used Odin v3.10.6
1. Tried flashing twrp-2.8.6.0-zeroflte.img.tar.
This failed. When trying to go into recovery mode (volume up + home + power button), I just went to normal recovery.
My phone was still functional at this point - but no custom recovery and no root.
2. Tried flashing "CF-Auto-Root-zeroflte-zerofltedv-smg920i.tar.md5"
This resulted in my phone being stuck on the black and white Galaxy S6 boot screen.
Luckily I could still get into download mode (volume down + home + power button). I had to do volume down + power for 6 seconds to hard reset the phone as you can no longer pull the battery out.
3. Then i tried flashing "CF-Auto-Root-zerofltetmo-zerofltetmo-smg920t.tar.md5"
The phone rebooted, then rebooted by itself a 3 times (without reaching launcher), then finally the launcher/lock screen came up!
I downloaded Root Checker and confirmed that I now have root!
I hope my experience can help others out there....
Happy rooting!
Click to expand...
Click to collapse
hey plz help me tried everything and using cf auto root method my phone keeps on rebooting....any suggestions?
thanks in advance..
My Galaxy S7 G930F is stuck at the Samsung Screen. I cant turn it off, however if I press the Power Button, click the Home button, and Volume Down, the screen goes black and goes back to the Samsung Screen.
Events Leading up:
I rooted my phone with CF-Auto-Root. It worked flawlessly. I then turned off the OEM Unlocked in developer options (stupid me). After that, I got SuperSu and updated the binary then restarted. FRP stopped me from booting back up. I used Odin download manager and flashed G930FXXU1APB6 (again, even more stupid). I was supposed to flash G930FXXU1BPH6. So, after flashing I get stuck at the Samsung screen. Please help.
Update: I did figure out how to get into Odin Mode by Vol Down, Home, and Power at the same time for 30 seconds. Downloading G930FXXU1BPH6 and will flash it when it's done.