Hello,
i want to go back from Dr. Ketan ROM to the stock one. I'm not 100% sure how to do that.
Can I just download the Stock Firmware with Fuija and patch the AP file with Magisk?
Then install BL, AP (Patched) ,CP and Home CSC with Odin ?
Is this going to work ?
Do I have to manually do a factory reset after or is the S22 going to do that automatically?
Thanks
kaischuett said:
Hello,
i want to go back from Dr. Ketan ROM to the stock one. I'm not 100% sure how to do that.
Can I just download the Stock Firmware with Fuija and patch the AP file with Magisk?
Then install BL, AP (Patched) ,CP and Home CSC with Odin ?
Is this going to work ?
Do I have to manually do a factory reset after or is the S22 going to do that automatically?
Thanks
Click to expand...
Click to collapse
Use the CSC.tar instead of HOME_CSC.tar. This will force a factory reset.
Otherwise, you are on track.
Alternatively, you may find it easier to flash Magisk in TWRP, using these steps:
Put device in download mode
Put the appopriate files in the appropriate slots in Odin - BL in BL, AP in AP, etc. Make sure you use CSC.tar for a factory reset
Uncheck the "Auto reboot" box"
Flash device. When complete, reboot to download mode again
Flash TWRP in the AP slot, again uncheck "Auto reboot"
Reboot your device into recovery mode
Transfer Magisk to your device and install in TWRP
Reboot to system. You should have root.
Related
hey guys, was gonna update to a 5.1.1 rom but i forgot to transfer the rom files into the phone before flashing the modem and bootloader.
twrp doesnt seem to let me use mtp mode to transfer large files either. anyone has any workarounds?
my current game plan :
1) download 5.1.1 (XXU2BOFJ) firmware from sammobile and completely flash the firmware over download mode with odin
(do i load it in AP? i forgot)
2) boot the phone, transfer roms
3) flash twrp in odin, go into twrp and wipe data/cache
4) flash rom.
am i on the right track? thanks!
Alternative is to connect your S6 to a PC and flash via odin.
So I flashed TWRP and root with SuperSU just fine with the intention of flashing the Superman ROM, with the OEM setting enabled. Then I made a full nandroid backup, realized I had forgotten the bootloader and modem from the Superman OP; I flashed those and then the TWRP again. but now I'm stuck on the Samsung startup screen.
ODIN still recognizes my phone and presumably still flash it, I can still install SuperSU without errors in TWRP.
My question is, should I flash the stock firmware from Updato to fix the phone, or should I try installing a custom rom?
If I flash the stock firmware, do I flash all 4 files AP, BL, CP, and CSC, and which options to I tick?
To flash stock, flash all 4 parts, AP, BL, CP and CSC, don't change any options in ODIN
Phone will be like new after flashing
If you don't want to factory reset, flash HOME_CSC, but I generally find it's a better option for bricks to reset
Odin passes and everythig on my s6 7.0 but does not actually root.. Any solutions?
If you are installing TWRP do not tick Auto-Reboot option in ODIN because it rewrites the stock one back when reboot.Hold the Recovery key combo to go into TWRP when first boot after flash.
When u have TWRP installed , flash magisk because SuperSU is abandoned i think from the developer(chainfire).
Hello, i have the SM-G9200ZH (Hong Kong version)
I disabled some system apps through pdp and got into a bootloop, after trying many things i did a factory reset and flashed through odin this firmware which is the latest
G9200ZHU2ERK2_G9200ZZH2ERK2_G9200ZHU2ERK2_HOME.tar the phone showed the bootanimation and then restarted to itself to bootlogo, over and over again.
So then i found a Pit file, and correct AP, BL, CSC, CP files for my device G9200ZHU2EQL1_G9200ZZH2EQL1_7.0, i flashed through odin selecting Nand Reset and Re-partition too.
At this point i still have the same issue, Phone goes into the bootanimation and then restarts itself over and over again.
The only way i have made the phone boot is by installing a custom ROM with TWRP, but i cant use any because it doesnt recognize the sim while using them.
Every time i flashed a firmware, When first booting i got a blue screen on the stock recovery that goes to 32% and then fails and says erasing.
Also im not using my Original Cable
So, can someone help me to make it work again? or to Tell me which custom rom actually works for my phone.
Did you try "wide /data" right after you've flashed the stock ROM?
forumber2 said:
Did you try "wide /data" right after you've flashed the stock ROM?
Click to expand...
Click to collapse
I did wipe data right after flashing through Odin, and also tried not wiping data after flashing through Odin. None of these worked, I don't know what to do
You can try flash twrp through odin then magisk/ supersu through twrp
Must Have An Unlocked Bootloader To Do This!
This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery along with Disable VBMETA image. The tar file will also automatically install magisk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required
Info For Bootloader Unlocks Can Be Found In Post 2
I Do Not Recommend Mixing Bit 5 With Higher Firmware!!!!
Unless Using Bit Safe Firmware That Is Patched​
Downloads
SM-N975U/U1/W- Model
USERDATA_AIO_N975_FORCE_WIPE_10_10_21.tar.md5 --Use on android 10 or 11
This will force a wipe of data no mater what.
Full Odin 3.1.1 Bit1 Safe Firmware
N975USQS7FUH3_BIT5_SAFE.7z
This are odin files and will safely update all image files too bit 7 and keep bit 5 bootloaders. Unfortunately this will wipe data this is beyond my control as it seems to be a side affect of mixing firmware it causes data not to mount and therefore my AIO will format it. This is full firmware with USERDATA_AIO. This will put you on U firmware. Before flashing I recommend removing your google account and make sure in download mode you are not frp locked
If above USERDATA_AIO_N975_FORCE_WIPE_08_30_21.tar.md5 is newer than the one in this zip use the newer one from above
Odin3_v3.14.1_3B_PatcheD.zip
Files For SM-N970 Found Here
TWRP Recovery Provide by @afaneh92
Be prepared to have your data wiped. The process tries to determine if you do or do not need to have data wipe but as a precaution just assume your data will be wiped. Especially if using U1 or W firmware
Install Instructions For Newly Unlocked Devices
You must be OEM Unlocked Bootloader
1. On Initial unlock of phone you must through setup and be signed into your google account.
2. Reboot phone too download mode and make sure KG STATUS=CHECKING (see pic) and not PRENORMAL. If PRENORMAL then do step 1 again
View attachment 5217631
3. Use patched 3.14 odin and load file USERDATA_SLOT_*9**U_**.tar.md5 you must choose one of the FORCE_WIPE files and load in the USERSDATA slot of odin and flash file
4. Phone will reboot to TWRP and remove encryption which will wipe phone. Phone will reboot back too TWRP to finish install then reboot to setup
Install Instructions For Updating Firmware On Phone Already Unlocked
1. Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above
2. Use patched 3.14 odin and load stock firmware in appropriate slots use regular CSC file in the CSC slot and load file one of the USERDATA_SLOT_*9**U_**.tar.md5 in the USERSDATA slot of odin and flash firmware. Do not use the User Data file that comes with firmware.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not
Install Instructions If Updating Images With TWRP
1. When done flashing images in TWRP Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above.
2. Use patched 3.14 odin and load file USERDATA_AIO_*9**_NO_WIPE_NO_BL.tar.md5 in the USERSDATA slot of odin and flash file.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not.
4. Alternatively to using USERDATA_AIO_*9**_NO_WIPE_NO_BL.tar.md5 in odin you can use AIO_Magisk_21_4_N10U_US_Series_Android_R.zip found in post 2
Features
No patches or mod zips are needed phone will already be rooted
Fix Safetynet
Bluetooth is patched for pairing to survive reboots
Samsung Health working
Bugs
Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms
Thanks To People That Make My Life Easier
@elliwigy
@klabit87
@Krog18
@me2151
@stang5litre
@Raymonf for modified odin
@rayan-refoua for boot animation
@TheMadScientist
@afaneh92
@kdrag0n for safetynet fix
3arthur6 for bluetooth patch zip
@JDBarlow for test S20 stuff
Info For Bootloader Unlocks Can Be Found
[Android][UNSAMLOCK] Bootloader Unlock for Samsung US/Canada Devices
This thread is @svetius approved Important notice: Do not update to April 2023 security update (XXXXXXXXXXWCX) or later. Examples: G998USQS6EWCA, N986USQU4HWD1. Samsung has patched the bootloader unlock again on those updates. NOTE: The OneUI...
forum.xda-developers.com
jrkruse said:
This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery along with Disable VBMETA image. The tar file will also automatically install magisk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required
Click to expand...
Click to collapse
I am interested in how to make this kind of files with everything intact, can you point out the procedures for me? Thanks!
I'm already rooted and running android 10 would anything here help me upgrade to android 11?
Can I use this method on my Note 10+ SM N975U running on Android 9 One U.I 1.5? I recently unlocked the bootloader.
wingmanob said:
Can I use this method on my Note 10+ SM N975U running on Android 9 One U.I 1.5? I recently unlocked the bootloader.
Click to expand...
Click to collapse
yes