Hello everyone, I may be planning to resell my Poco X3 Pro, and for that, I want to reflash the stock ROM and relock the bootloader.
As I understand it, there are different ROM versions, India, Global, EU, etc, and flashing the wrong ROM and unlocking will brick the device, is that correct? I bought my phone from Iran, but as Xiaomi phones are often imported unofficially, the actual version of the phone may not be clear. Is there any way I can find out the stock ROM version so I can relock the bootloader? I still have the box, btw.
Thanks.
You can Figure out which Version you have by Baseband Version in System settings.
No clue which one is which though^^
Haldi4803 said:
You can Figure out which Version you have by Baseband Version in System settings.
No clue which one is which though^^
Click to expand...
Click to collapse
I have updated the firmware several times, doesn't that matter?
i_devour_babies said:
I have updated the firmware several times, doesn't that matter?
Click to expand...
Click to collapse
As long as the ROM version is the same or newer than Firmware you won't have any problems.
i_devour_babies said:
Hello everyone, I may be planning to resell my Poco X3 Pro, and for that, I want to reflash the stock ROM and relock the bootloader.
As I understand it, there are different ROM versions, India, Global, EU, etc, and flashing the wrong ROM and unlocking will brick the device, is that correct? I bought my phone from Iran, but as Xiaomi phones are often imported unofficially, the actual version of the phone may not be clear. Is there any way I can find out the stock ROM version so I can relock the bootloader? I still have the box, btw.
Thanks.
Click to expand...
Click to collapse
Can try this website:
Xiaomi Full INFO CHECKER - FREE | XiaomiCheck.com | XiaomiCheck.com
Check Xiaomi Mi Status by IMEI or Lock code and make sure the MI status is Off before you buy or sell a Xiaomi device | MI Find Device Check | Mi Account Check
xiaomicheck.com
This is not official Xiaomi website.
Holy **** they know your phone number and Email address just by IMEI
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bought mine on Amazon. So only 1 year warranty
Haldi4803 said:
Holy **** they know your phone number and Email address just by IMEI
View attachment 5925103
Bought mine on Amazon. So only 1 year warranty
Click to expand...
Click to collapse
Purchase Country: Germany
The actual warranty should be according to where it is from.
In general, Global is 1 year, while Europe is 2 years. UK is also 2 years.
Could ask Xiaomi/POCO about it.
Mi Deutschland
www.mi.com
POCO Deutschland
www.po.co
POCO Deutschland
www.po.co
The non-official website could show the information probably due to the "Mi-Activation lock: On", in order for the "Find my device" function to work.
You can log into Official Xiaomi and check and or un-link
https://global.account.xiaomi.com/fe/service/login/password?_locale=en_US
https://i.mi.com
i_devour_babies said:
Hello everyone, I may be planning to resell my Poco X3 Pro, and for that, I want to reflash the stock ROM and relock the bootloader.
As I understand it, there are different ROM versions, India, Global, EU, etc, and flashing the wrong ROM and unlocking will brick the device, is that correct? I bought my phone from Iran, but as Xiaomi phones are often imported unofficially, the actual version of the phone may not be clear. Is there any way I can find out the stock ROM version so I can relock the bootloader? I still have the box, btw.
Thanks.
Click to expand...
Click to collapse
Just flash Global ROM and lock bootloader. It doesn't matter the region.
Download original ROM from here: https://xiaomifirmwareupdater.com/miui/vayu/
Use fastboot rom, don't use recovery.
Related
So as far as I know, ALL docomo XZ SO-01J come with status "bootloader unlock allowed: NO", and I have yet to see otherwise.
But is there a difference to the AU version, or the Softbank? Is either more likely to be unlockable? anybody have experience in that regard?
I also want to do a root or rom installation
my DoCoMo unlock status yes, but im afraid for Root or install global rom. Is it root and global install or custom ROM effect on the SIM card locked?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SO-01J using Tapatalk
OK so Ill just answer my own post. It really depends on where you bought the phone and how it was unlocked.
If it was unlocked by just putting in the unlock code generated from a provider, Bootloader will still be locked, BLU status NO
If it was unlocked through flashmode and the code input that way (I have not done it but you get the idea), It should be able to unlock UBL YES
Most sellers are lazy basically, and just punch in the code and be done with it. there are sellers who do it the hard way, but you have to ask around. I asked around 15 sellers, and 3 of them said it was, 1 wasn't unlockable after all (i returned the unit), another one was, and the 3rd was a docomo but I havent ordered a unit.
Docomos can be unlockable, BUT they have some hardware / low level software quirks, and can be buggy when flashing non-docomo ROMs
Au and Softbank are pretty much the same, but I heard (cant confirm so far) NFC is not working on Softbank phones after flashing global ROMs, on AU it should work.
aliciafree said:
my DoCoMo unlock status yes, but im afraid for Root or install global rom. Is it root and global install or custom ROM effect on the SIM card locked?View attachment 4726252View attachment 4726253
Sent from my SO-01J using Tapatalk
Click to expand...
Click to collapse
I would test flash an official docomo ROM just to be comfortable with the process and knowing "that it works, and you have to downgrade to a marshmellow official ROM first anyway for a TA backup. then you can most likely go back in case something doesnt work.
ven1x said:
OK so Ill just answer my own post. It really depends on where you bought the phone and how it was unlocked.
If it was unlocked by just putting in the unlock code generated from a provider, Bootloader will still be locked, BLU status NO
If it was unlocked through flashmode and the code input that way (I have not done it but you get the idea), It should be able to unlock UBL YES
Most sellers are lazy basically, and just punch in the code and be done with it. there are sellers who do it the hard way, but you have to ask around. I asked around 15 sellers, and 3 of them said it was, 1 wasn't unlockable after all (i returned the unit), another one was, and the 3rd was a docomo but I havent ordered a unit.
Docomos can be unlockable, BUT they have some hardware / low level software quirks, and can be buggy when flashing non-docomo ROMs
Au and Softbank are pretty much the same, but I heard (cant confirm so far) NFC is not working on Softbank phones after flashing global ROMs, on AU it should work.
I would test flash an official docomo ROM just to be comfortable with the process and knowing "that it works, and you have to downgrade to a marshmellow official ROM first anyway for a TA backup. then you can most likely go back in case something doesnt work.
Click to expand...
Click to collapse
I can confirm that NFC doesn't work anymore on 601SO after flashing global rom. Not a big deal though as I doesn't use NFC often.
upbeatwrench said:
I can confirm that NFC doesn't work anymore on 601SO after flashing global rom. Not a big deal though as I doesn't use NFC often.
Click to expand...
Click to collapse
Can i flash a global rom to So-01J docomo
ytheekshana said:
Can i flash a global rom to So-01J docomo
Click to expand...
Click to collapse
I tried it once and it can't
ytheekshana said:
Can i flash a global rom to So-01J docomo
Click to expand...
Click to collapse
try this
https://forum.xda-developers.com/showpost.php?p=78396811&postcount=29
Where can I get Poco X3 firmwares to flash custom ROMs , I mean only the firmware and not the whole ROM to whom I have to flash via fastboot.
https://sourceforge.net/projects/nitrogen-project/files/surya/11.0/firmware+vendor/
You could also try the following:
pnin said:
POCO X3 NFC (surya) Firmware Downloads
https://xiaomifirmwareupdater.com/firmware/surya/
Click to expand...
Click to collapse
.
pnin said:
You could also try the following:
.
Click to expand...
Click to collapse
I hope this does not count as necro bumping but how can I tell the difference between Europe and Global version?
my model number is M2007J20CG but I could not figure out the rest.
yuri0r said:
I hope this does not count as necro bumping but how can I tell the difference between Europe and Global version?
my model number is M2007J20CG but I could not figure out the rest.
Click to expand...
Click to collapse
From what I've heard..., the EUROPE version is a custom rom based on MIUI and is debloated.
ThatDamnFrog said:
From what I've heard..., the EUROPE version is a custom rom based on MIUI and is debloated.
Click to expand...
Click to collapse
so I can flash either firmware? the only thing I know for certain is that I don't have the Indian version (my X3 was a present)
yuri0r said:
so I can flash either firmware? the only thing I know for certain is that I don't have the Indian version (my X3 was a present)
Click to expand...
Click to collapse
install Orange fox recovery, boot into it, look at the initial screen, find out the row with text fingerprint: there you can see your actual fw and QJGMIXM is what you should look for and flash firmware with tag QJGMIXM (or whatever you'll see there on your phone)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yuri0r said:
I hope this does not count as necro bumping but how can I tell the difference between Europe and Global version?
Click to expand...
Click to collapse
ThatDamnFrog said:
From what I've heard..., the EUROPE version is a custom rom based on MIUI and is debloated.
Click to expand...
Click to collapse
Just to clarify this: ThatDamnFrog seems to be confusing the custom Xiaomi.eu ROM with the European version of the official MIUI stock ROM.
The European official ROM (marked with a QJGEUXM code) is different from the real MIUI global ROM (which has a QJGMIXM code).
pnin said:
Just to clarify this: ThatDamnFrog seems to be confusing the custom Xiaomi.eu ROM with the European version of the official MIUI stock ROM.
The European official ROM (marked with a QJGEUXM code) is different from the real MIUI global ROM (which has a QJGMIXM code).
Click to expand...
Click to collapse
Oh yeah my bad...sorry for that one @yuri0r
I've a OP 7 Pro Sprint Variant, Model: GM1925. When I was in stock ROM, the latest build was 10.0.7.GM25CC. Few weeks earlier, I followed the guide here and was able to successfully convert it to EU firmware. The reason behind this conversion is to get the latest OOS updates asap. But it seems the updates for 5G phones are lagging far behind. My phone is running on 10.0.11.GM27BA currently.
Further, I tried to convert my phone to International variant by following the guide here but failed. More specifically, it stopped after 'Param preload'.
Now, I badly want to convert it to International variant. I don't mind if losing 5G would enable dual sim functionality on my phone.
Is there any way?
[I've attached a screenshot of my phone's About section]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I got the same problem. Have you got any solution of this??
Shahid Islam said:
I got the same problem. Have you got any solution of this??
Click to expand...
Click to collapse
alive.dew said:
I've a OP 7 Pro Sprint Variant, Model: GM1925. When I was in stock ROM, the latest build was 10.0.7.GM25CC. Few weeks earlier, I followed the guide here and was able to successfully convert it to EU firmware. The reason behind this conversion is to get the latest OOS updates asap. But it seems the updates for 5G phones are lagging far behind. My phone is running on 10.0.11.GM27BA currently.
Further, I tried to convert my phone to International variant by following the guide here but failed. More specifically, it stopped after 'Param preload'.
Now, I badly want to convert it to International variant. I don't mind if losing 5G would enable dual sim functionality on my phone.
Is there any way?
[I've attached a screenshot of my phone's About section]
View attachment 5285229
Click to expand...
Click to collapse
Late on the replies but converting to international is impossible due to different partitions. Dual sim WILL NEVER WORK because we don't have the config files for dsds on the X50 modem. Because of the 5G, updates are behind and will be for basically the phone's EOL. Custom roms are a grey area as modem needs porting and rotation needs fixing, and Android 11 custom roms won't work (due to no modem functionality)
TheGoldenNopler said:
Late on the replies but converting to international is impossible due to different partitions. Dual sim WILL NEVER WORK because we don't have the config files for dsds on the X50 modem. Because of the 5G, updates are behind and will be for basically the phone's EOL. Custom roms are a grey area as modem needs porting and rotation needs fixing, and Android 11 custom roms won't work (due to no modem functionality)
Click to expand...
Click to collapse
Thanks for this important information. I won't wast more time for this.
Pretty sure all this is working now
Azukegi said:
Pretty sure all this is working now
Click to expand...
Click to collapse
Hello. Can now somehow go to the latest version of Android for this phone? Sprint 1925 carrier unlocked.
FollowRed said:
Hello. Can now somehow go to the latest version of Android for this phone? Sprint 1925 carrier unlocked.
Click to expand...
Click to collapse
yep, join the Telagram channel and and feel free to ask any questions there. all the tools you need will be there also. https://t.me/+BEQp7TnD7ls1NmZh
Hello,
I've just bought a refurbished device on amazon, but when i started it, it shows me the screen with "The bootloader is unlocked and software integrity cannot be guaranteed"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The warranty is gone, but it's ok.
I have relock the device with fastboot, the name of the rom seems legit.
My question : is there still any security risk ?
Thanks
Unless it was specifically advertised as unlocked and you specifically bought it for that reason, I'd reset the phone with an MSM tool or similar.
Maybe I'm just OCD. I factory reset every electronic device I buy before setting it up.
SMcC2 said:
Unless it was specifically advertised as unlocked and you specifically bought it for that reason, I'd reset the phone with an MSM tool or similar.
Maybe I'm just OCD. I factory reset every electronic device I buy before setting it up.
Click to expand...
Click to collapse
Thanks, i'm a begginer, do you have any guide on how factory reset phone with MSM ?
Voaddd said:
Thanks, i'm a begginer, do you have any guide on how factory reset phone with MSM ?
Click to expand...
Click to collapse
Do you know what model phone and what region it is?
SMcC2 said:
Do you know what model phone and what region it is?
Click to expand...
Click to collapse
Yes,
model : motorola one vision
region : EU (France)
Thanks
Voaddd said:
Yes,
model : motorola one vision
region : EU (France)
Thanks
Click to expand...
Click to collapse
I can't find a copy of the device reset tool on the forums or the manufacturer website.
I would research the issue further on the following sites:
How to Reset the Motorola one vision
Motorola One Vision Questions and Answers (XDA)
Voaddd said:
Hello,
I've just bought a refurbished device on amazon, but when i started it, it shows me the screen with "The bootloader is unlocked and software integrity cannot be guaranteed"
View attachment 5379097
The warranty is gone, but it's ok.
I have relock the device with fastboot, the name of the rom seems legit.
My question : is there still any security risk ?
Thanks
Click to expand...
Click to collapse
Having a device's bootloader locked simply means that device only will boot into / run Stock ROM: This has nothing to do with whether Android is safe or not.
jwoegerbauer said:
Having a device's bootloader locked simply means that device only will boot into / run Stock ROM: This has nothing to do with whether Android is safe or not.
Click to expand...
Click to collapse
thanks, yes i have relock the device myself.
But is it sure that it’s now using the original stock rom ? And not a hacked one ?
YES, because original Stock ROM is signed by manufacturer: the bootloader verifies this signature.
Thanks a lot.
Has anyone else received this update? Is there anything new in it?
I personally can't find anything changed, it looks and feels exactly like MIUI 13. Couldn't find any new features either.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Xiaomi 12 EEAStable BetaRecoveryV14.0.5.0.TLCEUXM13.04.8 GB2023-01-17
Changelog:[System]
Updated Android Security Patch to January 2023. Increased system security.
[More features and improvements]
Search in Settings is now more advanced. With search history and categories in results, everything looks much crisper now.
Hi the only major thing detected are customizable folders for now. The system speed and accu drain are same for me compared to A13 miui 13. Notifications are working for me some reported delayed push notifications.
actual battery statistic for 7 days used Miui 14
what a second this version is a beta and its out?
I still have miui global 13.0.13 stable SLIEUXM security patch 1/10/2022
Why miui 14 is TLI and not SLI???
Can somebody update only the update file? I can find only the method with fastboot.
lagos911 said:
what a second this version is a beta and its out?
I still have miui global 13.0.13 stable SLIEUXM security patch 1/10/2022
Why miui 14 is TLI and not SLI???
Click to expand...
Click to collapse
SLI=
Android 12Snow Cone
TLI=
Android 13Tiramisu
https://xiaomifirmwareupdater.com/archive/miui/cupid/
there is anyway to update to android 13 without unlock or root my device with recovery or fastboot?
My Global version just got this update, everything looks good so far! based in the UK.
I am stuck with miui 13 version 13.0.13.0 3 times the lucky number
hello, anyone knows if cupid with product model: 2201123g is european or global?
beastbrain said:
hello, anyone knows if cupid with product model: 2201123g is european or global?
Click to expand...
Click to collapse
There are only 2 models, CN or Global.
The Global version has an EEA or Global rom depending on the seller and/or the country of purchase.
ok so I have a 2201123g bought in Europe, I want to flash back the original rom, should I do global or eea? Also if you do clean and lock you lock the bootloader? I want to relock without bricking it or anything
beastbrain said:
ok so I have a 2201123g bought in Europe, I want to flash back the original rom, should I do global or eea? Also if you do clean and lock you lock the bootloader? I want to relock without bricking it or anything
Click to expand...
Click to collapse
Use this tool:
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
From what you say EEA(RGPD+sound restrictions), Global is better and better than stock:
Xiaomi European Community | MIUI ROM Since 2010
MIUI ROM Global Language creators since 2010 providing support for Xiaomi MIUI and Mi Home products
xiaomi.eu
if I use global and lock bootloader is there going to be a problem?
beastbrain said:
if I use global and lock bootloader is there going to be a problem?
Click to expand...
Click to collapse
With this version of phone(Global) you can flash and lock the bootloader with any rom version except CN.
NOSS8 said:
With this version of phone(Global) you can flash and lock the bootloader with any rom version except CN.
Click to expand...
Click to collapse
ok thanks, I will try the global rom first without lock maybe and then try to lock
beastbrain said:
ok thanks, I will try the global rom first without lock maybe and then try to lock
Click to expand...
Click to collapse
The data will be erased each time.