As the title says!Go get'em!
AT&T A13 40B Luns
ATT V60 A13 40B - Google Drive
drive.google.com
Verizon A13 40A Luns
Verizon A13 40A - Google Drive
drive.google.com
Surgemanxx said:
As the title says!Go get'em!
AT&T A13 40B Luns
ATT V60 A13 40B - Google Drive
drive.google.com
Verizon A13 40A Luns
Verizon A13 40A - Google Drive
drive.google.com
Click to expand...
Click to collapse
Upgraded to a13 40b
Thank you dear
Please give me an instructions how to write. I am confused how to load in qfil.
reimon123 said:
Please give me an instructions how to write. I am confused how to load in qfil.
Click to expand...
Click to collapse
Follow this post here!This will explain how to backup and restore in LUN format.
[Tutorial] Full Flash Backup And Restore
This tutorial shows how to make a full backup of the phone flash and how to restore it. Codes fit LG G8 which with some minor modifications they can be used for any other Qualcomm based devices. If you provide me the "PartitionsList.xml" of other...
forum.xda-developers.com
Thanks a lot, finally updated to A13!
Thank you so much.
Hola amigo, no le entiendo al tutorial que mencionas en tus mensajes quiero actualizar a android 13 tengo la version de AT&T tengo poco tiempo trabajando con dispositivos LG, por ende hay conceptos que no manejo y no quiero arruinar el celular podrias hacer un tuto espeficiamente para el dispositivo para que este completo, saludos y gracias por el apoyo
I crossed to TM. Is there any different with ATT A13 ??
altawashm said:
I crossed to TM. Is there any different with ATT A13 ??
Click to expand...
Click to collapse
Personally I think it's a little more stable compared to T-Mobile's firmware.
Surgemanxx said:
As the title says!Go get'em!
AT&T A13 40B Luns
ATT V60 A13 40B - Google Drive
drive.google.com
Verizon A13 40A Luns
Verizon A13 40A - Google Drive
drive.google.com
Click to expand...
Click to collapse
I did restore the VM luns, after erase the data the phone boot up but no fingerprint!, After i repair the fingerprint i lost the sound in the phone, even after erase the data still nothing (no sound at all)!!
ghani mal said:
I did restore the VM luns, after erase the data the phone boot up but no fingerprint!, After i repair the fingerprint i lost the sound in the phone, even after erase the data still nothing (no sound at all)!!
Click to expand...
Click to collapse
Have you tried restoring just a kdz with lgup to see if the sound returns?I have used this backup a couple of times myself,and it works fine on my Verizon variant?
Surgemanxx said:
Have you tried restoring just a kdz with lgup to see if the sound returns?I have used this backup a couple of times myself,and it works fine on my Verizon variant?
Click to expand...
Click to collapse
I did not found a13KDZ for the VM in the internet, can you link one?, I did crosflash it with the EA a13 KDZ but it didn't work (igot OPID mismatch even after i erase ftm,opa,opb......)
This is probably dumb but I’m new to android,
Do I need to root before I do backups and restores through LUN.
And the restore should work fine with any att model?
Related
Hello.
Hey someone knows anything about the version "J4" without the "+" i have one, the Samsung Galaxy J4 Model: SM-J400M i'm trying to unlock the bootloader using this instructions but i do the thing but nothing happend. Also i tried changing the date, resetting the phone or enabling and disabling the knox feature etc etc... but the OEM line does not appears in developer options.
Specs info: CPU-Z
help?
Also the phone it tends a lot of random unexpectedly shutting down, especially playing games... :crying:
kapmino269 said:
Also J4+
Does your phone support treble Rom ?
Click to expand...
Click to collapse
How i can check that?
kapmino269 said:
Write in play store
check treble
And download app .
Click to expand...
Click to collapse
supposedly Yes.
New Picture. https://prnt.sc/n26sz5
kapmino269 said:
@Jorgeapp
Upload picture in another site this site is unsafe or upload it by xda labs apk .
I can't find picture in that site .
Also you don't need to ask for that just google "how to check treble support ".
Click to expand...
Click to collapse
I finally finish the Prenormal RMM state and when i turn ON the OEM unlock the phone restart and return to the factory mode, i check again and the OEM unlock is missing like nothing happend... i dont know what to do, no one has rooted my device... all tutorials are for others models. i also try using kingroot and similars and nothing.
what a disappointment.
Jorgeapp said:
I finally finish the Prenormal RMM state and when i turn ON the OEM unlock the phone restart and return to the factory mode, i check again and the OEM unlock is missing like nothing happend... i dont know what to do, no one has rooted my device... all tutorials are for others models. i also try using kingroot and similars and nothing.
what a disappointment.
Click to expand...
Click to collapse
Hi! I've the same model as you, and it looks like samsung it's updating without the option now.
I wrote about this about 2 month ago i think, if you want you can read it here:
https://forum.xda-developers.com/general/help/oem-t3892877
But, if you want modify some layers read about Andromeda and Substratum here:
https://forum.xda-developers.com/apps/substratum/official-starting-substratum-andromeda-t3798316
kapmino269 said:
Reflash stock and try again alo you can root your j400f:
Unlock oem from DEVELOPERS DEVELOPERS OPTION
Then
- Go to download mode .
-Flash this with odin .
https://github.com/TwrpBuilder/andr....2.3-TwrpBuilder-j4ltejx-2018-10-22_17-38.tar
-Reboot twrp recovery.
-Then flash this by twrp
Rmm disable security :
Link:
https://forum.xda-developers.com/attachment.php?attachmentid=4481843&d=1524258795
-then flash magisk :
Link:
https://github.com/topjohnwu/Magisk/releases/download/v18.1/Magisk-v18.1.zip
---------- Post added at 08:52 PM ---------- Previous post was at 08:49 PM ----------
Don't flash stock send picture from download mode may by another phone and upload it .
Click to expand...
Click to collapse
wow.. i just bought this phone and want root access due to dev needings. i study programming and i was looking for twrp and some way to get root. and you just posted this!. :laugh::laugh::highfive:
just want to know if this works? becuase i already found twrp for the j4+ but was looking for the normal J4.
also i need to learn everything about the prenormal stuff and all that before rooting. but you're a lifesaver.
kapmino269 said:
Flash RMM-State_Bypass_Mesa_v2.zip after installing twrp .
Click to expand...
Click to collapse
I'll do soon as I can.
Forgot to say.. how do you enable oem unlock on this device? Do I have to wait a whole week with it turned on? I want all the necessary information before installing TWRP and rooting. Also.. what about Android pie? Because Samsung posted that they will update this device to Android Pie, same for the j4+ one. I don't want to softbrick the phone or lose root when updating.
Sent from my Samsung SM-J400M using XDA Labs
Alguien tiene algun kernel para el j4lte que funciome para el nethunter ?
Es lo mismo J400 M que J400F
No entiendo ,porque parten hablando del j400 M y terminan dando remedios para el J400 F ....
Just came here as a way to thank everyone for this thread and say that the twrp for j4lte works perfect fine for SM-J400m on latest version android 10. Just enable OEM lock and flash it through ODIN.
[QUOTE = "endmjwknj, postagem: 84400367, membro: 11390151"]
Vim aqui como uma forma de agradecer a todos por este tópico e dizer que o twrp para j4lte funciona perfeitamente bem para SM-J400m na versão mais recente do Android 10. Basta habilitar o bloqueio de OEM e atualizá-lo através do ODIN.
[/CITAR]
can you help me install twrp on android 10 on j400m?
can you help me install twrp on android 10 on j400m?
brunoyp said:
[QUOTE = "endmjwknj, postagem: 84400367, membro: 11390151"]
Vim aqui como uma forma de agradecer a todos por este tópico e dizer que o twrp para j4lte funciona perfeitamente bem para SM-J400m na versão mais recente do Android 10. Basta habilitar o bloqueio de OEM e atualizá-lo através do ODIN.
[/CITAR]
can you help me install twrp on android 10 on j400m?
Click to expand...
Click to collapse
i could but there are guys who are more experienced to help you through all the process. Join this telegram group https://t.me/SamsungGalaxyJ4 and they're certainly assist you without a doubt.
Exynos Galaxy J4 is kind of similar to J3 2017 in terms of chipset and resolution so TWRP and ROMs of J3 2017 may work on J4.
Samsung Galaxy J3 (2017) ROMs, Kernels, Recoveries
Improve your Samsung Galaxy J3 (2017)'s battery life, performance, and look by rooting it and installing a custom ROM, kernel, and more.
forum.xda-developers.com
Basically, all the ROMs I've found and used on my cell phone
According to Nokia support, all variants are the same, only the supported SIMs vary
So
Support Variant: TA-1028, TA-1038, TA-1032, TA-1020 (Theoretically)
Tested only on TA-1028
some are for mounting with SP tools, and others through the option Update From SDcard, in the recovery
And one for OSTLA(to recover bricks)
>>>OSTLA<<<
OSTLA Software
Version: 7.1
NE1-215H-0-00WW-B02.nb0
>>>SPTools<<<
SPTools(DA Included)
Version: 7.1(2.15H)December 2017
NE1-215H-0-00WW-B02
Version: 8.0(3.380) July 2018
NE1-3380-0-00WW-B01
Version: 8.1(4.42D) December 2018
NE1-442D-0-00WW-B01
>>>RECOVERY<<<
Version: 8.1(4.43E) May 2019
NE1-443E-0-00WW-B01(update)
Version: 9.0(5.120) May 2019
NE1-5120-0-00WW-B01(update)
all SPTool version they have their scatter inside
P.D:I am not an English speaker, so if you notice that everything is misread, it is to translate
Thanks
Thank you I'll try those stock rom on my hard brick Nokia 1028.. any other rom with ost (no working just connect your phone at the bottom) or flash tool works.. (flash tool ask for auth file)
Can't find tool
Can you upload all the tools you used? I can't find a working one
Upload a working driver too
tadpole975 said:
Thank you I'll try those stock rom on my hard brick Nokia 1028.. any other rom with ost (no working just connect your phone at the bottom) or flash tool works.. (flash tool ask for auth file)
Click to expand...
Click to collapse
Normally, when you request AUTH file, it is because you are using the wrong button combination, or you have not selected the correct download-agent
xuanhaivptthn said:
Can you upload all the tools you used? I can't find a working one
Upload a working driver too
Click to expand...
Click to collapse
added files.
DA included in the sptools folder.
The drivers you can use are in the OSTLA folder
djxpro said:
added files.
DA included in the sptools folder.
The drivers you can use are in the OSTLA folder
Click to expand...
Click to collapse
Thanks!
Anyways, my friend had a Nokia 3 TA-1032 on Android 9 lasted security build (i dont remember that) but he was trying to unlock bootloader. There are some tutorials on how to do that, but they all using Android 7 and/or Android 8.1 so he used SP Flash Tool to downgrade to Android 7 and now his phone is bricked. Do you have any idea on how to fix his phone?
---------- Post added at 12:52 PM ---------- Previous post was at 12:46 PM ----------
Extra information, after flashing his phone using SP Flash Tool, the phone won't turn on, it just keep vibrating, like bootloop. So he formatted whole flash using SP Flash Tool, he thought that he can just format and flash again like with Windows, but now it doesn't even vibrate
xuanhaivptthn said:
Thanks!
Anyways, my friend had a Nokia 3 TA-1032 on Android 9 lasted security build (i dont remember that) but he was trying to unlock bootloader. There are some tutorials on how to do that, but they all using Android 7 and/or Android 8.1 so he used SP Flash Tool to downgrade to Android 7 and now his phone is bricked. Do you have any idea on how to fix his phone?
---------- Post added at 12:52 PM ---------- Previous post was at 12:46 PM ----------
Extra information, after flashing his phone using SP Flash Tool, the phone won't turn on, it just keep vibrating, like bootloop. So he formatted whole flash using SP Flash Tool, he thought that he can just format and flash again like with Windows, but now it doesn't even vibrate
Click to expand...
Click to collapse
use OSTLA (ROM Android 7.1), if it works on the first try, fine.
If the process fails (after flashing the bootloader, according to the application states), try again with sptools (Rom 7.1).
if it doesn't work either, try ROM 8.0 with sptools
I went through a lot of bricks, and managed to fix them trying anyway. Just try until you turn on.
in this same forum, there is the correct way to unlock the bootloader in android 9, since what changes are the commands to use in the ADB
djxpro said:
use OSTLA (ROM Android 7.1), if it works on the first try, fine.
If the process fails (after flashing the bootloader, according to the application states), try again with sptools (Rom 7.1).
if it doesn't work either, try ROM 8.0 with sptools
I went through a lot of bricks, and managed to fix them trying anyway. Just try until you turn on.
in this same forum, there is the correct way to unlock the bootloader in android 9, since what changes are the commands to use in the ADB
Click to expand...
Click to collapse
OSTLA doesn't recognize his phone, but I read online that SP Tools only works if the bootloader has been unlocked so...?
I will try those ROM anyways
Download miracle thunder from this link https://androidfilehost.com/?fid=11410963190603915389 Now Install in your pc click on write button and select scatter file (Android 7.1 ROM) you can see there is universal written just click on that and select Nokia 3...Now click on start button and connect your phone press volume up down button to detect your device and it will definitely unbrick your phone after that you need to write your IMEI cause previously you done with format all + download this will delete entire emmc partition nvram...
Thanks me later it will work?
To unlock bootloader of NOKIA 3 in Android pie 9.0 follow my thread I wrote the instructions ????
https://forum.xda-developers.com/nokia-3/how-to/method-to-unlock-bootloader-nokia-3-pie-t4012285
Sent from my NE1 using XDA Labs
Arin59 said:
Download miracle thunder from this link https://androidfilehost.com/?fid=11410963190603915389 Now Install in your pc click on write button and select scatter file (Android 7.1 ROM) you can see there is universal written just click on that and select Nokia 3...Now click on start button and connect your phone press volume up down button to detect your device and it will definitely unbrick your phone after that you need to write your IMEI cause previously you done with format all + download this will delete entire emmc partition nvram...
Thanks me later it will work
To unlock bootloader of NOKIA 3 in Android pie 9.0 follow my thread I wrote the instructions ??
https://forum.xda-developers.com/nokia-3/how-to/method-to-unlock-bootloader-nokia-3-pie-t4012285
Sent from my NE1 using XDA Labs
Click to expand...
Click to collapse
Doesn't work. Any ideas?
Gracias hermano, sucede que instale una ROM sin estar desbloqueado mi telefono, ni el blootloader, asi que me quedo en la pantalla de recovery y de ahi no pasaba, me descargue el recovery que dejaste, lo instale desde la SD y recupere el sistema, ahora si puede desbloquear el cargador de inicio de manera correcta y todo quedo solucionado.
MIL GRACIAS EN VERDAD PROBÉ DE TODO Y ESTE FUE EL ÚNICO QUE ME FUNCIONO, DIOS TE BENDIGA.
Kofseven said:
Gracias hermano, sucede que instale una ROM sin estar desbloqueado mi telefono, ni el blootloader, asi que me quedo en la pantalla de recovery y de ahi no pasaba, me descargue el recovery que dejaste, lo instale desde la SD y recupere el sistema, ahora si puede desbloquear el cargador de inicio de manera correcta y todo quedo solucionado.
MIL GRACIAS EN VERDAD PROBÉ DE TODO Y ESTE FUE EL ÚNICO QUE ME FUNCIONO, DIOS TE BENDIGA.
Click to expand...
Click to collapse
acabo de ver estos msg viejo, estuve fuera mucho tiempo por culpa del trabajo.
genial que hayas podido arreglarlo.
es bueno ser de ayuda D:
I hope someone can make a tutorial to unlock BL and get root permission。So that people can better use the black shark mobile phone
ÿeah, me too
......
johnny886 said:
中国人已经成功测试了与《黑鲨3》系列相同的解锁方法,但他们不会免费共享信息!
----------
MOD EDIT: English Translation Below
The Chinese have successfully tested the same unlocking method as the "Black Shark 3" series, but they will not share information for free!
Click to expand...
Click to collapse
I feel sad.
johnny886 said:
中国人已经成功测试了与《黑鲨3》系列相同的解锁方法,但他们不会免费共享信息!
----------
MOD EDIT: English Translation Below
The Chinese have successfully tested the same unlocking method as the "Black Shark 3" series, but they will not share information for free!
Click to expand...
Click to collapse
Well is it the same way and files? If it works like the black shark 3. I think you would need a different twrp but it should work the same.
johnny886 said:
中国人已经成功测试了与《黑鲨3》系列相同的解锁方法,但他们不会免费共享信息!
Click to expand...
Click to collapse
It's actually free, but you didn't find it
求教程
http://www.viprom.cn/list/6706.html Here's the black shark 3 unlock tutorial
没有人一样,这手机只在国内发了吧?
ZaneCode6574 said:
没有人一样,这手机只在国内发了吧?好像是···
Click to expand...
Click to collapse
Dont waste your money, Think before you buy. They NEVER released BLACK SHARK 1,2,2PRO,3,3PRO,3S KERNELSOURCES. I think YouTube reviewers need to point that as well
Jbazt_katuforzs said:
Dont waste your money, Think before you buy. They NEVER released BLACK SHARK 1,2,2PRO,3,3PRO,3S KERNELSOURCES. I think YouTube reviewers need to point that as well
Click to expand...
Click to collapse
Personally I don't need sources, but just TWRP to debloat. I would be fine with the regular ROM
I just use this phone for gaming like if it was a videoconsole, for customizing I have my POCO F1 as my daily driver.
anyone who tried this?
How to Root Xiaomi Black Shark 4 – Two Working Methods!
In this guide, I will show you how to root Xiaomi Black Shark 4 using magisk. Because in this article we will share with you working method.
magiskupdate.com
migsymigs said:
anyone who tried this?
How to Root Xiaomi Black Shark 4 – Two Working Methods!
In this guide, I will show you how to root Xiaomi Black Shark 4 using magisk. Because in this article we will share with you working method.
magiskupdate.com
Click to expand...
Click to collapse
That is a useless placeholder site, that just uses each brand and model and sets the exact same page for the effect
They say "download the latest TWRP from twrp.me" but obviously, there is not TWRP for Black Shark 4 yet (and I have my doubts it will ever be since generally Black Shark phones have been mostly disregarded in terms of development since core kernels are never released)
Let's see how it goes.
aa2994576 said:
I hope someone can make a tutorial to unlock BL and get root permission。So that people can better use the black shark mobile phone
Click to expand...
Click to collapse
You need a modified firehose to flash in edl to unlock BL. Google helps on how to do this
The method isn't even "chinese" but from qualcomm (basically for oem's).
Jbazt_katuforzs said:
Dont waste your money, Think before you buy. They NEVER released BLACK SHARK 1,2,2PRO,3,3PRO,3S KERNELSOURCES. I think YouTube reviewers need to point that as well
Click to expand...
Click to collapse
Well most youtubers (especially those reviewing 100000$ phones) get those phones from oems and oem's dont like the custom rom development--> they will just cut the free phones for the reviewers (kinda like Nvidia tried with hardware unboxed). Also those reviewers probably cant even install a custom rom....
MiSSigNNo said:
Personally I don't need sources, but just TWRP to debloat. I would be fine with the regular ROM
I just use this phone for gaming like if it was a videoconsole, for customizing I have my POCO F1 as my daily driver.
Click to expand...
Click to collapse
Don't debloat a phone without any possibilities of getting back a working stock rom from oem with TWRP (also debloating in TWRP on a phone with super partition will break everything, leaving u with a 700 bucks paper weight) use magisk and system app debloater (if sth goes wrong disable module/root and you are back to stock)
Do you feel save with a recovery (which can easily be modified to always have access to everything u do on the phone) without any sources and from some shady chinese guy who wants to make money with it? He could just remotely lock your phone and make you pay to get the unlock token... and then do it again xD
With kernel sources you will also get a working and propper TWRP recovery, without you will always be bound to stock kernel (which you cant update bcs blackshark doesn't supply stock roms/doesn't update rooted phones) at least...
wertus33333 said:
You need a modified firehose to flash in edl to unlock BL. Google helps on how to do this
Click to expand...
Click to collapse
Can you elaborate on this? I have not found anything relevant regarding this topic
MiSSigNNo said:
Can you elaborate on this? I have not found anything relevant regarding this topic
Click to expand...
Click to collapse
https://github.com/Naveen3Singh/BLUnlocker but bs does not have official stock firmware downloads... so wait for a mayor (android) update until you update your phone to get the update download link using adb
Compré la versión china de Black Shark 4 y no la versión global, el problema que lo hace va fatal, el GPS no funciona bien, los servicios de google tampoco, ¿hay alguna forma de pasar la rom china a la rom global? No he encontrado una forma en ninguna página todavía, si alguien pudiera ayudarme con esto lo agradecería, o al menos alguien que me enseñe cómo erradicar los servicios de Google o cuál es la mejor manera para que funcionen No es necesario root o instalar twrp porque hasta ahora es imposible
Español
Compré la versión china de Black Shark 4 y no la versión global, el problema que lo hace va fatal, el GPS no funciona bien, los servicios de google tampoco, ¿hay alguna forma de pasar la rom china a la rom global? No he encontrado una forma en ninguna página todavía, si alguien pudiera ayudarme con esto lo agradecería, o al menos alguien que me enseñe erradicar los servicios de Google o cuál es la mejor manera para que funcionen sin necesidad de ser root o instalar twrp porque hasta ahora es imposible
Hi everyone.
Hi bought this Tablet Xiaonxin Lenovo J607F and I try to change the Rom with a Global Rom but unlikely in the process of do it, i brick the tablet. I would like to re-install the same ROM. Everyone have the rom for the Lenovo TB-J607F?
Thanks
Top one on this page?
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
in this list there is not the firmware/rom for the J607F. I can only found the J607Z which is different because the tablet is with a SIM card support.
I wish you the best of luck in your search. Locating chinese ROM's is a challenge.
Any version is fine, the important is must be a J607F Rom.
Thanks btw
Try the Chinese Lenovo forums using google translate, or contact your seller for assistance.
Does anybody know if we can use the TB-607Z firmware in the TB-607F? I want to use the global rom so badly.
ok. Good news for the owner of Lenovo J607F.
Yesterday after a long research, translation and adventure in the Chinese world forum and various group, I finally solve few of my problem.
1. I get the Original Rom/Firmware of the TB-J607F (but i still don't know how to attach or upload here because is large 2.5gb so i will attache the link).
TB-J6070F CN Firmware Wifi:
https://hkfront.wxwork.qq.com/downloadobject?fileid=08011204313330332210313638383835323933373533313832342a0131322438333730346531352d373962622d343165632d613739362d31616132626238333161353938948cb2800a421466e7bc63552ed4763f86807256cc700c22ab96dc48015802600768b8177207333030303030309001cc80958b069a0100a001faf003&filename=TB-J607F_CN_WIFI_USER_Q00010.0_R_ZUI_12.6.142_ST_210801_qpst.7z&authkey=7008001004187022701c36ff2d7563ec81a014014e77512b4fd88e27b258ab443799286dcdbdcb17dbd435ee4f94eb2ab60d1500a2b7117563d11592f84c3f62de7eb082c35288e5b17f09f70fd6b078144fd415392853d1c0ecb2781f96ece1e25de20498e443c2ca56797a34563957acfd8edf983bae2aa7&weixinnum=13102673015097907
2. You have to change the Firmware of the tablet with the J607Z Rom because the original ROM is CN Version (do not exist the Global Rom).
3. if you decide to change the Rom then just download from here the Firmware and Procedure with the QFIL: https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/
PS. the J607Z is a SIM tablet and the J607F Wifi Tablet, becareful the Mobile service will not work after you change the Rom because the J607F is not a Sim Tablet. Also there is a risk to brick the tablet.
Hope I helped a lot of people with this problem.
Thanks
franper00 said:
ok. Good news for the owner of Lenovo J607F.
Yesterday after a long research, translation and adventure in the Chinese world forum and various group, I finally solve few of my problem.
1. I get the Original Rom/Firmware of the TB-J607F (but i still don't know how to attach or upload here because is large 2.5gb so i will attache the link).
TB-J6070F CN Firmware Wifi:
https://hkfront.wxwork.qq.com/downloadobject?fileid=08011204313330332210313638383835323933373533313832342a0131322438333730346531352d373962622d343165632d613739362d31616132626238333161353938948cb2800a421466e7bc63552ed4763f86807256cc700c22ab96dc48015802600768b8177207333030303030309001cc80958b069a0100a001faf003&filename=TB-J607F_CN_WIFI_USER_Q00010.0_R_ZUI_12.6.142_ST_210801_qpst.7z&authkey=7008001004187022701c36ff2d7563ec81a014014e77512b4fd88e27b258ab443799286dcdbdcb17dbd435ee4f94eb2ab60d1500a2b7117563d11592f84c3f62de7eb082c35288e5b17f09f70fd6b078144fd415392853d1c0ecb2781f96ece1e25de20498e443c2ca56797a34563957acfd8edf983bae2aa7&weixinnum=13102673015097907
2. You have to change the Firmware of the tablet with the J607Z Rom because the original ROM is CN Version (do not exist the Global Rom).
3. if you decide to change the Rom then just download from here the Firmware and Procedure with the QFIL: https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/
PS. the J607Z is a SIM tablet and the J607F Wifi Tablet, becareful the Mobile service will not work after you change the Rom because the J607F is not a Sim Tablet. Also there is a risk to brick the tablet.
Hope I helped a lot of people with this problem.
Thanks
Click to expand...
Click to collapse
this link is dead bro
franper00 said:
está bien. Buenas noticias para el propietario de Lenovo J607F.
Ayer, después de una larga investigación, traducción y aventura en el foro mundial chino y varios grupos, finalmente resolví algunos de mis problemas.
1. Obtuve la Rom/Firmware original del TB-J607F (pero aún no sé cómo adjuntar o cargar aquí porque tiene un tamaño de 2,5 gb, así que adjuntaré el enlace).
TB-J6070F CN Firmware Wifi:
[URL desplegarse = "true"] https://hkfront.wxwork.qq.com/downl...cfd8edf983bae2aa7&weixinnum=13102673015097907 [/ URL]
2. Tienes que cambiar el Firmware de la tablet con la Rom J607Z porque la ROM original es la Versión CN (no existe la Rom Global).
3. Si decide cambiar la Rom, simplemente descargue desde aquí el Firmware y el Procedimiento con el QFIL: https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/
PD. la J607Z es una tableta SIM y la tableta Wifi J607F, tenga cuidado de que el servicio móvil no funcione después de cambiar la Rom porque la J607F no es una tableta Sim. También existe el riesgo de bloquear la tableta.
Espero haber ayudado a mucha gente con este problema.
Gracias
Click to expand...
Click to collapse
Mí amigo el enlace no funciona...crees podrías ayudarme? Te podría pagar por el servicio..!! De antemano gracias
You can flash 607Z (P11 5G global) rom onto 607F (XiaoXin Pad Plus).
Process of converting it to global firmware, broadly, is
1) Change region from China/undefined to global
https://www.ppomppu.co.kr/zboard/view.php?id=androidtab&page...
There are a couple of XDA threads on doing this region switch too. My 607F was already switched to global when I bought it (from Aliexpress, had a pseudo-global firmware on it)
2) Using Lenovo Rescue Assistant in rescue mode, setting it to P11 5G
you cannot flash the lolinet firmwares with QFIL - the packages don't seem to be correctly configured for QFIL flashing - so you must use Lenovo Assistant to "rescue" the tablet to flash. It will download its own copy of the firmware.
Note: It didn't work for me on windows 10 - I had to use a windows 7 machine to get it working.
suuperboom said:
You can flash 607Z (P11 5G global) rom onto 607F (XiaoXin Pad Plus).
Process of converting it to global firmware, broadly, is
1) Change region from China/undefined to global
https://www.ppomppu.co.kr/zboard/view.php?id=androidtab&page...
There are a couple of XDA threads on doing this region switch too. My 607F was already switched to global when I bought it (from Aliexpress, had a pseudo-global firmware on it)
2) Using Lenovo Rescue Assistant in rescue mode, setting it to P11 5G
you cannot flash the lolinet firmwares with QFIL - the packages don't seem to be correctly configured for QFIL flashing - so you must use Lenovo Assistant to "rescue" the tablet to flash. It will download its own copy of the firmware.
Note: It didn't work for me on windows 10 - I had to use a windows 7 machine to get it working.
Click to expand...
Click to collapse
Did you change the firmware on your xioxin plus to the p11 5g rom? Is it an official firmware? Im asking because i want to improve the speakers performance on my xioxin plus (pseudo global). I understood that on the pseudo global its not possible to enhance the speakers performance? Any ideas would be a huge help
I have no idea about speakers and firmware.
I changed by xiaoxin pad plus from Aliexpress with pseudoglobal to the official P11 5G rom, using LMSA to "rescue" the tablet. I think the setting in LMSA is P11 5G & "61".
My tablet came with the region already set to global when I checked, so I did not have to do that step.
Yes instructions are in Russian, but it is well detailed Google Translate helped me.
franper00 said:
ok. Good news for the owner of Lenovo J607F.
Yesterday after a long research, translation and adventure in the Chinese world forum and various group, I finally solve few of my problem.
1. I get the Original Rom/Firmware of the TB-J607F (but i still don't know how to attach or upload here because is large 2.5gb so i will attache the link).
TB-J6070F CN Firmware Wifi:
https://hkfront.wxwork.qq.com/downloadobject?fileid=08011204313330332210313638383835323933373533313832342a0131322438333730346531352d373962622d343165632d613739362d31616132626238333161353938948cb2800a421466e7bc63552ed4763f86807256cc700c22ab96dc48015802600768b8177207333030303030309001cc80958b069a0100a001faf003&filename=TB-J607F_CN_WIFI_USER_Q00010.0_R_ZUI_12.6.142_ST_210801_qpst.7z&authkey=7008001004187022701c36ff2d7563ec81a014014e77512b4fd88e27b258ab443799286dcdbdcb17dbd435ee4f94eb2ab60d1500a2b7117563d11592f84c3f62de7eb082c35288e5b17f09f70fd6b078144fd415392853d1c0ecb2781f96ece1e25de20498e443c2ca56797a34563957acfd8edf983bae2aa7&weixinnum=13102673015097907
2. You have to change the Firmware of the tablet with the J607Z Rom because the original ROM is CN Version (do not exist the Global Rom).
3. if you decide to change the Rom then just download from here the Firmware and Procedure with the QFIL: https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/
PS. the J607Z is a SIM tablet and the J607F Wifi Tablet, becareful the Mobile service will not work after you change the Rom because the J607F is not a Sim Tablet. Also there is a risk to brick the tablet.
Hope I helped a lot of people with this problem.
Thanks
Click to expand...
Click to collapse
Did you re-install the j607f rom successfully? I’m using the j607z rom. Now i want to re-install the j607f.
Thank you!
franper00 said:
ok. Good news for the owner of Lenovo J607F.
Yesterday after a long research, translation and adventure in the Chinese world forum and various group, I finally solve few of my problem.
1. I get the Original Rom/Firmware of the TB-J607F (but i still don't know how to attach or upload here because is large 2.5gb so i will attache the link).
TB-J6070F CN Firmware Wifi:
https://hkfront.wxwork.qq.com/downloadobject?fileid=08011204313330332210313638383835323933373533313832342a0131322438333730346531352d373962622d343165632d613739362d31616132626238333161353938948cb2800a421466e7bc63552ed4763f86807256cc700c22ab96dc48015802600768b8177207333030303030309001cc80958b069a0100a001faf003&filename=TB-J607F_CN_WIFI_USER_Q00010.0_R_ZUI_12.6.142_ST_210801_qpst.7z&authkey=7008001004187022701c36ff2d7563ec81a014014e77512b4fd88e27b258ab443799286dcdbdcb17dbd435ee4f94eb2ab60d1500a2b7117563d11592f84c3f62de7eb082c35288e5b17f09f70fd6b078144fd415392853d1c0ecb2781f96ece1e25de20498e443c2ca56797a34563957acfd8edf983bae2aa7&weixinnum=13102673015097907
2. You have to change the Firmware of the tablet with the J607Z Rom because the original ROM is CN Version (do not exist the Global Rom).
3. if you decide to change the Rom then just download from here the Firmware and Procedure with the QFIL: https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/
PS. the J607Z is a SIM tablet and the J607F Wifi Tablet, becareful the Mobile service will not work after you change the Rom because the J607F is not a Sim Tablet. Also there is a risk to brick the tablet.
Hope I helped a lot of people with this problem.
Thanks
Click to expand...
Click to collapse
I can't download the CN rom. can some one pls re-upload it
raiso said:
I can't download the CN rom. can some one pls re-upload it
Click to expand...
Click to collapse
Xiaoshin Pad Plus Chinese ROM 12.6.142 Firmware
https://drive.google.com/file/d/11JbIGoC1-sucYjBaQY-omJ7ce1BzRj_W/view?usp=sharing
Xiaoshin Pad Plus Chinese ROM 12.5.040 Firmware
https://drive.google.com/file/d/1EEtPfkt-ilj-Z6-7kdB4qRJg011LAqNe/view?usp=sharing
Do you know how to go back the CN rom?
kiendta said:
Xiaoshin Pad Plus Chinese ROM 12.6.142 Firmware
https://drive.google.com/file/d/11JbIGoC1-sucYjBaQY-omJ7ce1BzRj_W/view?usp=sharing
Xiaoshin Pad Plus Chinese ROM 12.5.040 Firmware
https://drive.google.com/file/d/1EEtPfkt-ilj-Z6-7kdB4qRJg011LAqNe/view?usp=sharing
Do you know how to go back the CN rom?
Click to expand...
Click to collapse
Yes, very simple
I flash base on Win 7. You have to download minimal ADB, QPST, all driver.....
1. unlock your pad plus
-Visit here to get the unlock file (The serial number case-sensitive)
https://www.zui.com/iunlock
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Your wait for about 10min, Lenovo send the unlock file to your email (sn.img)
- Copy sn.img to ADB folder.
- Restart your pad plus to fastboot:
adb reboot bootloader
- Then you type these code:
fastboot flash unlock sn.img
fastboot oem unlock-go
2. Flash rom
- After unlock bootloader, turn off your pad plus.
- press and hold volume + button, then plug cable to pc/laptop (9008 mode)
- go to QPST install folder (maybe C:\Program Files (x86)\Qualcomm\QPST\bin), run QFIL.exe.
- Then Load content (rom folder), choose content.xml
- press download content button, wait for 5 minute and relax
raiso said:
Yes, very simple
I flash base on Win 7. You have to download minimal ADB, QPST, all driver.....
1. unlock your pad plus
-Visit here to get the unlock file (The serial number case-sensitive)
https://www.zui.com/iunlock
View attachment 5586103
- Your wait for about 10min, Lenovo send the unlock file to your email (sn.img)
- Copy sn.img to ADB folder.
- Restart your pad plus to fastboot:
adb reboot bootloader
- Then you type these code:
fastboot flash unlock sn.img
fastboot oem unlock-go
2. Flash rom
- After unlock bootloader, turn off your pad plus.
- press and hold volume + button, then plug cable to pc/laptop (9008 mode)
- go to QPST install folder (maybe C:\Program Files (x86)\Qualcomm\QPST\bin), run QFIL.exe.
- Then Load content (rom folder), choose content.xml
- press download content button, wait for 5 minute and relax
View attachment 5586125
Click to expand...
Click to collapse
I have known what you said. I did go to the ZUI unlock website an fill in all the required information and click on the submit application button to apply for device-specific unlock. But the web said “请输入正确的序列号” (Please enter the correct IMEI1). I’m sure I filled serial number correctly. Until now, i have not got the unlock img. Please help me to get the unlock img, my device serial number is HA1GZ2HA, my email is: [email protected]. Thank you!
I have received an official email later.
Offer some possible suggestions:
1. To activate the tablet account and wait for more than 24 hours (I'm not sure)
2. The sn.img contains the serial number of the machine, so other people's sm.img cannot be used
kiendta said:
Xiaoshin Pad Plus Chinese ROM 12.6.142 Firmware
https://drive.google.com/file/d/11JbIGoC1-sucYjBaQY-omJ7ce1BzRj_W/view?usp=sharing
Xiaoshin Pad Plus Chinese ROM 12.5.040 Firmware
https://drive.google.com/file/d/1EEtPfkt-ilj-Z6-7kdB4qRJg011LAqNe/view?usp=sharing
Do you know how to go back the CN rom?
Click to expand...
Click to collapse
I can't download the CN rom. can some one pls re-upload it
tengo duda sobre la nueva actulización de oxigen OS en el Oneplus 9 (no pro)...
¿esta actualización también restaura el acceso a la cámara auxiliar GCam en este modelo?
tengo entendido que en el modelo Pro si lo hace, pero quisiera saber si en el modelo normal también está disponible con la ultima actulización.
I have doubts about the new oxygen OS update on the Oneplus 9 (not pro)...
Does this update also restore access to the GCam auxiliary camera on this model?
I understand that in the Pro model it does, but I would like to know if in the normal model it is also available with the latest update.
does anyone know how to unlock it? (No Pro version)
The Camer2 Probe says this phone is compatible, at least on A11 with a LE2110 on OOS
akboy7015 said:
The Camer2 Probe says this phone is compatible, at least on A11 with a LE2110 on OOS
Click to expand...
Click to collapse
mine doesn't have it and I don't know why, just "full"
plus, I returned it and I don't know whether to buy it (or Pro version) again because of that
joi.est said:
mine doesn't have it and I don't know why, just "full"
plus, I returned it and I don't know whether to buy it (or Pro version) again because of that
Click to expand...
Click to collapse
I have the 12GB/256GB version, maybe this one is different, but I have doubt. This API exists since many years, every high-end phones should have sensors compatible
akboy7015 said:
I have the 12GB/256GB version, maybe this one is different, but I have doubt. This API exists since many years, every high-end phones should have sensors compatibi
Click to expand...
Click to collapse
joi.est said:
mine doesn't have it and I don't know why, just "full"
plus, I returned it and I don't know whether to buy it (or Pro version) again because of that
Click to expand...
Click to collapse
akboy7015 said:
I have the 12GB/256GB version, maybe this one is different, but I have doubt. This API exists since many years, every high-end phones should have sensors compatible
Click to expand...
Click to collapse
I had the 8GB version, is maybe that, but also idk if worth to try that model because with the other one the returned back was really complicated