Question Xiaoxin Lenovo TB J607F Rom/Firmware - Lenovo P11

Hi everyone.
Hi bought this Tablet Xiaonxin Lenovo J607F and I try to change the Rom with a Global Rom but unlikely in the process of do it, i brick the tablet. I would like to re-install the same ROM. Everyone have the rom for the Lenovo TB-J607F?
Thanks

Top one on this page?
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com

in this list there is not the firmware/rom for the J607F. I can only found the J607Z which is different because the tablet is with a SIM card support.

I wish you the best of luck in your search. Locating chinese ROM's is a challenge.

Any version is fine, the important is must be a J607F Rom.
Thanks btw

Try the Chinese Lenovo forums using google translate, or contact your seller for assistance.

Does anybody know if we can use the TB-607Z firmware in the TB-607F? I want to use the global rom so badly.

ok. Good news for the owner of Lenovo J607F.
Yesterday after a long research, translation and adventure in the Chinese world forum and various group, I finally solve few of my problem.
1. I get the Original Rom/Firmware of the TB-J607F (but i still don't know how to attach or upload here because is large 2.5gb so i will attache the link).
TB-J6070F CN Firmware Wifi:
https://hkfront.wxwork.qq.com/downloadobject?fileid=08011204313330332210313638383835323933373533313832342a0131322438333730346531352d373962622d343165632d613739362d31616132626238333161353938948cb2800a421466e7bc63552ed4763f86807256cc700c22ab96dc48015802600768b8177207333030303030309001cc80958b069a0100a001faf003&filename=TB-J607F_CN_WIFI_USER_Q00010.0_R_ZUI_12.6.142_ST_210801_qpst.7z&authkey=7008001004187022701c36ff2d7563ec81a014014e77512b4fd88e27b258ab443799286dcdbdcb17dbd435ee4f94eb2ab60d1500a2b7117563d11592f84c3f62de7eb082c35288e5b17f09f70fd6b078144fd415392853d1c0ecb2781f96ece1e25de20498e443c2ca56797a34563957acfd8edf983bae2aa7&weixinnum=13102673015097907
2. You have to change the Firmware of the tablet with the J607Z Rom because the original ROM is CN Version (do not exist the Global Rom).
3. if you decide to change the Rom then just download from here the Firmware and Procedure with the QFIL: https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/
PS. the J607Z is a SIM tablet and the J607F Wifi Tablet, becareful the Mobile service will not work after you change the Rom because the J607F is not a Sim Tablet. Also there is a risk to brick the tablet.
Hope I helped a lot of people with this problem.
Thanks

franper00 said:
ok. Good news for the owner of Lenovo J607F.
Yesterday after a long research, translation and adventure in the Chinese world forum and various group, I finally solve few of my problem.
1. I get the Original Rom/Firmware of the TB-J607F (but i still don't know how to attach or upload here because is large 2.5gb so i will attache the link).
TB-J6070F CN Firmware Wifi:
https://hkfront.wxwork.qq.com/downloadobject?fileid=08011204313330332210313638383835323933373533313832342a0131322438333730346531352d373962622d343165632d613739362d31616132626238333161353938948cb2800a421466e7bc63552ed4763f86807256cc700c22ab96dc48015802600768b8177207333030303030309001cc80958b069a0100a001faf003&filename=TB-J607F_CN_WIFI_USER_Q00010.0_R_ZUI_12.6.142_ST_210801_qpst.7z&authkey=7008001004187022701c36ff2d7563ec81a014014e77512b4fd88e27b258ab443799286dcdbdcb17dbd435ee4f94eb2ab60d1500a2b7117563d11592f84c3f62de7eb082c35288e5b17f09f70fd6b078144fd415392853d1c0ecb2781f96ece1e25de20498e443c2ca56797a34563957acfd8edf983bae2aa7&weixinnum=13102673015097907
2. You have to change the Firmware of the tablet with the J607Z Rom because the original ROM is CN Version (do not exist the Global Rom).
3. if you decide to change the Rom then just download from here the Firmware and Procedure with the QFIL: https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/
PS. the J607Z is a SIM tablet and the J607F Wifi Tablet, becareful the Mobile service will not work after you change the Rom because the J607F is not a Sim Tablet. Also there is a risk to brick the tablet.
Hope I helped a lot of people with this problem.
Thanks
Click to expand...
Click to collapse
this link is dead bro

franper00 said:
está bien. Buenas noticias para el propietario de Lenovo J607F.
Ayer, después de una larga investigación, traducción y aventura en el foro mundial chino y varios grupos, finalmente resolví algunos de mis problemas.
1. Obtuve la Rom/Firmware original del TB-J607F (pero aún no sé cómo adjuntar o cargar aquí porque tiene un tamaño de 2,5 gb, así que adjuntaré el enlace).
TB-J6070F CN Firmware Wifi:
[URL desplegarse = "true"] https://hkfront.wxwork.qq.com/downl...cfd8edf983bae2aa7&weixinnum=13102673015097907 [/ URL]
2. Tienes que cambiar el Firmware de la tablet con la Rom J607Z porque la ROM original es la Versión CN (no existe la Rom Global).
3. Si decide cambiar la Rom, simplemente descargue desde aquí el Firmware y el Procedimiento con el QFIL: https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/
PD. la J607Z es una tableta SIM y la tableta Wifi J607F, tenga cuidado de que el servicio móvil no funcione después de cambiar la Rom porque la J607F no es una tableta Sim. También existe el riesgo de bloquear la tableta.
Espero haber ayudado a mucha gente con este problema.
Gracias
Click to expand...
Click to collapse
Mí amigo el enlace no funciona...crees podrías ayudarme? Te podría pagar por el servicio..!! De antemano gracias

You can flash 607Z (P11 5G global) rom onto 607F (XiaoXin Pad Plus).
Process of converting it to global firmware, broadly, is
1) Change region from China/undefined to global
https://www.ppomppu.co.kr/zboard/view.php?id=androidtab&page...
There are a couple of XDA threads on doing this region switch too. My 607F was already switched to global when I bought it (from Aliexpress, had a pseudo-global firmware on it)
2) Using Lenovo Rescue Assistant in rescue mode, setting it to P11 5G
you cannot flash the lolinet firmwares with QFIL - the packages don't seem to be correctly configured for QFIL flashing - so you must use Lenovo Assistant to "rescue" the tablet to flash. It will download its own copy of the firmware.
Note: It didn't work for me on windows 10 - I had to use a windows 7 machine to get it working.

suuperboom said:
You can flash 607Z (P11 5G global) rom onto 607F (XiaoXin Pad Plus).
Process of converting it to global firmware, broadly, is
1) Change region from China/undefined to global
https://www.ppomppu.co.kr/zboard/view.php?id=androidtab&page...
There are a couple of XDA threads on doing this region switch too. My 607F was already switched to global when I bought it (from Aliexpress, had a pseudo-global firmware on it)
2) Using Lenovo Rescue Assistant in rescue mode, setting it to P11 5G
you cannot flash the lolinet firmwares with QFIL - the packages don't seem to be correctly configured for QFIL flashing - so you must use Lenovo Assistant to "rescue" the tablet to flash. It will download its own copy of the firmware.
Note: It didn't work for me on windows 10 - I had to use a windows 7 machine to get it working.
Click to expand...
Click to collapse
Did you change the firmware on your xioxin plus to the p11 5g rom? Is it an official firmware? Im asking because i want to improve the speakers performance on my xioxin plus (pseudo global). I understood that on the pseudo global its not possible to enhance the speakers performance? Any ideas would be a huge help

I have no idea about speakers and firmware.
I changed by xiaoxin pad plus from Aliexpress with pseudoglobal to the official P11 5G rom, using LMSA to "rescue" the tablet. I think the setting in LMSA is P11 5G & "61".
My tablet came with the region already set to global when I checked, so I did not have to do that step.
Yes instructions are in Russian, but it is well detailed Google Translate helped me.

franper00 said:
ok. Good news for the owner of Lenovo J607F.
Yesterday after a long research, translation and adventure in the Chinese world forum and various group, I finally solve few of my problem.
1. I get the Original Rom/Firmware of the TB-J607F (but i still don't know how to attach or upload here because is large 2.5gb so i will attache the link).
TB-J6070F CN Firmware Wifi:
https://hkfront.wxwork.qq.com/downloadobject?fileid=08011204313330332210313638383835323933373533313832342a0131322438333730346531352d373962622d343165632d613739362d31616132626238333161353938948cb2800a421466e7bc63552ed4763f86807256cc700c22ab96dc48015802600768b8177207333030303030309001cc80958b069a0100a001faf003&filename=TB-J607F_CN_WIFI_USER_Q00010.0_R_ZUI_12.6.142_ST_210801_qpst.7z&authkey=7008001004187022701c36ff2d7563ec81a014014e77512b4fd88e27b258ab443799286dcdbdcb17dbd435ee4f94eb2ab60d1500a2b7117563d11592f84c3f62de7eb082c35288e5b17f09f70fd6b078144fd415392853d1c0ecb2781f96ece1e25de20498e443c2ca56797a34563957acfd8edf983bae2aa7&weixinnum=13102673015097907
2. You have to change the Firmware of the tablet with the J607Z Rom because the original ROM is CN Version (do not exist the Global Rom).
3. if you decide to change the Rom then just download from here the Firmware and Procedure with the QFIL: https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/
PS. the J607Z is a SIM tablet and the J607F Wifi Tablet, becareful the Mobile service will not work after you change the Rom because the J607F is not a Sim Tablet. Also there is a risk to brick the tablet.
Hope I helped a lot of people with this problem.
Thanks
Click to expand...
Click to collapse
Did you re-install the j607f rom successfully? I’m using the j607z rom. Now i want to re-install the j607f.
Thank you!

franper00 said:
ok. Good news for the owner of Lenovo J607F.
Yesterday after a long research, translation and adventure in the Chinese world forum and various group, I finally solve few of my problem.
1. I get the Original Rom/Firmware of the TB-J607F (but i still don't know how to attach or upload here because is large 2.5gb so i will attache the link).
TB-J6070F CN Firmware Wifi:
https://hkfront.wxwork.qq.com/downloadobject?fileid=08011204313330332210313638383835323933373533313832342a0131322438333730346531352d373962622d343165632d613739362d31616132626238333161353938948cb2800a421466e7bc63552ed4763f86807256cc700c22ab96dc48015802600768b8177207333030303030309001cc80958b069a0100a001faf003&filename=TB-J607F_CN_WIFI_USER_Q00010.0_R_ZUI_12.6.142_ST_210801_qpst.7z&authkey=7008001004187022701c36ff2d7563ec81a014014e77512b4fd88e27b258ab443799286dcdbdcb17dbd435ee4f94eb2ab60d1500a2b7117563d11592f84c3f62de7eb082c35288e5b17f09f70fd6b078144fd415392853d1c0ecb2781f96ece1e25de20498e443c2ca56797a34563957acfd8edf983bae2aa7&weixinnum=13102673015097907
2. You have to change the Firmware of the tablet with the J607Z Rom because the original ROM is CN Version (do not exist the Global Rom).
3. if you decide to change the Rom then just download from here the Firmware and Procedure with the QFIL: https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/
PS. the J607Z is a SIM tablet and the J607F Wifi Tablet, becareful the Mobile service will not work after you change the Rom because the J607F is not a Sim Tablet. Also there is a risk to brick the tablet.
Hope I helped a lot of people with this problem.
Thanks
Click to expand...
Click to collapse
I can't download the CN rom. can some one pls re-upload it

raiso said:
I can't download the CN rom. can some one pls re-upload it
Click to expand...
Click to collapse
Xiaoshin Pad Plus Chinese ROM 12.6.142 Firmware
https://drive.google.com/file/d/11JbIGoC1-sucYjBaQY-omJ7ce1BzRj_W/view?usp=sharing
Xiaoshin Pad Plus Chinese ROM 12.5.040 Firmware
https://drive.google.com/file/d/1EEtPfkt-ilj-Z6-7kdB4qRJg011LAqNe/view?usp=sharing
Do you know how to go back the CN rom?

kiendta said:
Xiaoshin Pad Plus Chinese ROM 12.6.142 Firmware
https://drive.google.com/file/d/11JbIGoC1-sucYjBaQY-omJ7ce1BzRj_W/view?usp=sharing
Xiaoshin Pad Plus Chinese ROM 12.5.040 Firmware
https://drive.google.com/file/d/1EEtPfkt-ilj-Z6-7kdB4qRJg011LAqNe/view?usp=sharing
Do you know how to go back the CN rom?
Click to expand...
Click to collapse
Yes, very simple
I flash base on Win 7. You have to download minimal ADB, QPST, all driver.....
1. unlock your pad plus
-Visit here to get the unlock file (The serial number case-sensitive)
https://www.zui.com/iunlock
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Your wait for about 10min, Lenovo send the unlock file to your email (sn.img)
- Copy sn.img to ADB folder.
- Restart your pad plus to fastboot:
adb reboot bootloader
- Then you type these code:
fastboot flash unlock sn.img
fastboot oem unlock-go
2. Flash rom
- After unlock bootloader, turn off your pad plus.
- press and hold volume + button, then plug cable to pc/laptop (9008 mode)
- go to QPST install folder (maybe C:\Program Files (x86)\Qualcomm\QPST\bin), run QFIL.exe.
- Then Load content (rom folder), choose content.xml
- press download content button, wait for 5 minute and relax

raiso said:
Yes, very simple
I flash base on Win 7. You have to download minimal ADB, QPST, all driver.....
1. unlock your pad plus
-Visit here to get the unlock file (The serial number case-sensitive)
https://www.zui.com/iunlock
View attachment 5586103
- Your wait for about 10min, Lenovo send the unlock file to your email (sn.img)
- Copy sn.img to ADB folder.
- Restart your pad plus to fastboot:
adb reboot bootloader
- Then you type these code:
fastboot flash unlock sn.img
fastboot oem unlock-go
2. Flash rom
- After unlock bootloader, turn off your pad plus.
- press and hold volume + button, then plug cable to pc/laptop (9008 mode)
- go to QPST install folder (maybe C:\Program Files (x86)\Qualcomm\QPST\bin), run QFIL.exe.
- Then Load content (rom folder), choose content.xml
- press download content button, wait for 5 minute and relax
View attachment 5586125
Click to expand...
Click to collapse
I have known what you said. I did go to the ZUI unlock website an fill in all the required information and click on the submit application button to apply for device-specific unlock. But the web said “请输入正确的序列号” (Please enter the correct IMEI1). I’m sure I filled serial number correctly. Until now, i have not got the unlock img. Please help me to get the unlock img, my device serial number is HA1GZ2HA, my email is: [email protected]. Thank you!

I have received an official email later.
Offer some possible suggestions:
1. To activate the tablet account and wait for more than 24 hours (I'm not sure)
2. The sn.img contains the serial number of the machine, so other people's sm.img cannot be used

kiendta said:
Xiaoshin Pad Plus Chinese ROM 12.6.142 Firmware
https://drive.google.com/file/d/11JbIGoC1-sucYjBaQY-omJ7ce1BzRj_W/view?usp=sharing
Xiaoshin Pad Plus Chinese ROM 12.5.040 Firmware
https://drive.google.com/file/d/1EEtPfkt-ilj-Z6-7kdB4qRJg011LAqNe/view?usp=sharing
Do you know how to go back the CN rom?
Click to expand...
Click to collapse
I can't download the CN rom. can some one pls re-upload it

Related

If you have an NXT-L29 or NXT-L09, please test!

Could anyone please help me out? I have a bricked device and am looking into how to unbrick it.
I'm particularly interested if the English version of HiSuite which says it supports the L09 and L29 actually does.
Could anyone with an L29 or an L09 please put their device in fastboot and try the system recovery from hisuite:
http://consumer.huawei.com/minisite/HiSuite_en/
A new version which supposedly supports the phones was released.
Could anyone confirm if this works?
cmon guys, help out this man, so that he can continue to help us with new firmware updates
Sent from my Huawei Mate 8 NXT-AL10 using Tapatalk
I did it with a L29 device. The app says Device is in recovery mode, and once I clicked next, It says your device is not supported for system recovery. Please take your device to a nearby huawei service center.
If your device is unlocked reflash through fastboot
Sent from my HUAWEI NXT-L29 using Tapatalk
M.Noury said:
If your device is unlocked reflash through fastboot
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
I wish that I could do that, but there are partitions that I can't flash with fastboot, which I did flash using other means when reverse engineering the updates. Those are the partitions which are broken and don't allow my phone to boot, or show anything on the screen for that matter.
There is a restore mechanism built into Huawei's fastboot to get into a separate restore mode, but I think there is a special recovery image needed which the Huawei Hisuite app can access. I just don't know how to find it when all the devices come back as unsupported, despite being shown as supported in the documentation. It's very strange.
This is something that Sony had done with two hidden partitions FOTA and TA . This makes the device unbrickable and also.Have the OEM ways to keep the boot locked with hidden features.
Hisuite latest Windows app has these features to restore and when I tried,it scanned my.phone and found.My.phone to be working fine.
1) start the hisuite App on pc
2) connect to the phone in fastboot mode
3) restore
4) the app scans and looks for the partitions and then restores the bricked phone ONLY
---------- Post added at 12:58 PM ---------- Previous post was at 12:55 PM ----------
Sorry to make this as another post
After downloading from that site the app is old edition.
After installing, check updates and you get latest hisuite app with material design with more features.
If anyone wants, I can upload the app which is 30+mb
bluheart said:
This is something that Sony had done with two hidden partitions FOTA and TA . This makes the device unbrickable and also.Have the OEM ways to keep the boot locked with hidden features.
Hisuite latest Windows app has these features to restore and when I tried,it scanned my.phone and found.My.phone to be working fine.
1) start the hisuite App on pc
2) connect to the phone in fastboot mode
3) restore
4) the app scans and looks for the partitions and then restores the bricked phone ONLY
---------- Post added at 12:58 PM ---------- Previous post was at 12:55 PM ----------
Sorry to make this as another post
After downloading from that site the app is old edition.
After installing, check updates and you get latest hisuite app with material design with more features.
If anyone wants, I can upload the app which is 30+mb
Click to expand...
Click to collapse
Duraaraa I was wondering if the suggestion from Bluheart resolved your issues
---------- Post added at 06:59 PM ---------- Previous post was at 06:58 PM ----------
Duraaraa I was wondering if the suggestion from Bluheart resolved your issues
duraaraa said:
Could anyone please help me out? I have a bricked device and am looking into how to unbrick it.
I'm particularly interested if the English version of HiSuite which says it supports the L09 and L29 actually does.
Could anyone with an L29 or an L09 please put their device in fastboot and try the system recovery from hisuite:
http://consumer.huawei.com/minisite/HiSuite_en/
A new version which supposedly supports the phones was released.
Could anyone confirm if this works?
Click to expand...
Click to collapse
Hi, I have a mate 8 NXT-L09 with C212B120 firmware, I tried the procedure you describe because I unlocked the bootloader, installed TWRP and rooted only to discover I did not like the out come, I lost some functionality of the huawei themes app and now I like to go back to its original out of the box state, to make long story short (not really), the huawei tool says it doesnt recognize the device and that I should take it to them for repairs, I tried this while i had TWRP and also while I had stock recovery on the device.
I wonder if it doesnt recognize the device because its rooted or with an unlocked bootloader?, im tempted to unroot and relock the bootloader and see if that will do the trick?, if i try this ill let you know what goes.
Cheers.
rom stock l09c212b120
danywalkert said:
Hi, I have a mate 8 NXT-L09 with C212B120 firmware, I tried the procedure you describe because I unlocked the bootloader, installed TWRP and rooted only to discover I did not like the out come, I lost some functionality of the huawei themes app and now I like to go back to its original out of the box state, to make long story short (not really), the huawei tool says it doesnt recognize the device and that I should take it to them for repairs, I tried this while i had TWRP and also while I had stock recovery on the device.
I wonder if it doesnt recognize the device because its rooted or with an unlocked bootloader?, im tempted to unroot and relock the bootloader and see if that will do the trick?, if i try this ill let you know what goes.
Cheers.
Click to expand...
Click to collapse
bunas danywalkert mira tengo un mate 8 de iusacel de fabrica venia con nxt-l09c212b120 y lo actulice a ala vercion b170 peor no hice un back up =( ahora tengo la vercion nxt-l0900b170 y tengo algunos errores como el de temas y otros mee gustaria saber si puedo regresar ami rom original y como le puedo hacer ? me podrias pasar tu backup o donde podria conseguir la rom original espero me puedas ayudar de ante mano muchas gracias.
Sorry amigo, only english is allowed in this forum.
alangastic said:
bunas danywalkert mira tengo un mate 8 de iusacel de fabrica venia con nxt-l09c212b120 y lo actulice a ala vercion b170 peor no hice un back up =( ahora tengo la vercion nxt-l0900b170 y tengo algunos errores como el de temas y otros mee gustaria saber si puedo regresar ami rom original y como le puedo hacer ? me podrias pasar tu backup o donde podria conseguir la rom original espero me puedas ayudar de ante mano muchas gracias.
Click to expand...
Click to collapse
Hi there, sorry for taking this long, didnt realize I had a message on this thread, hopefuly you already fixed your situation, if not, let me know, for sure I can help.
Saludos.

Samsung Galaxy J4 SM-J400M

Hello.
Hey someone knows anything about the version "J4" without the "+" i have one, the Samsung Galaxy J4 Model: SM-J400M i'm trying to unlock the bootloader using this instructions but i do the thing but nothing happend. Also i tried changing the date, resetting the phone or enabling and disabling the knox feature etc etc... but the OEM line does not appears in developer options.
Specs info: CPU-Z
help?
Also the phone it tends a lot of random unexpectedly shutting down, especially playing games... :crying:
kapmino269 said:
Also J4+
Does your phone support treble Rom ?
Click to expand...
Click to collapse
How i can check that?
kapmino269 said:
Write in play store
check treble
And download app .
Click to expand...
Click to collapse
supposedly Yes.
New Picture. https://prnt.sc/n26sz5
kapmino269 said:
@Jorgeapp
Upload picture in another site this site is unsafe or upload it by xda labs apk .
I can't find picture in that site .
Also you don't need to ask for that just google "how to check treble support ".
Click to expand...
Click to collapse
I finally finish the Prenormal RMM state and when i turn ON the OEM unlock the phone restart and return to the factory mode, i check again and the OEM unlock is missing like nothing happend... i dont know what to do, no one has rooted my device... all tutorials are for others models. i also try using kingroot and similars and nothing.
what a disappointment.
Jorgeapp said:
I finally finish the Prenormal RMM state and when i turn ON the OEM unlock the phone restart and return to the factory mode, i check again and the OEM unlock is missing like nothing happend... i dont know what to do, no one has rooted my device... all tutorials are for others models. i also try using kingroot and similars and nothing.
what a disappointment.
Click to expand...
Click to collapse
Hi! I've the same model as you, and it looks like samsung it's updating without the option now.
I wrote about this about 2 month ago i think, if you want you can read it here:
https://forum.xda-developers.com/general/help/oem-t3892877
But, if you want modify some layers read about Andromeda and Substratum here:
https://forum.xda-developers.com/apps/substratum/official-starting-substratum-andromeda-t3798316
kapmino269 said:
Reflash stock and try again alo you can root your j400f:
Unlock oem from DEVELOPERS DEVELOPERS OPTION
Then
- Go to download mode .
-Flash this with odin .
https://github.com/TwrpBuilder/andr....2.3-TwrpBuilder-j4ltejx-2018-10-22_17-38.tar
-Reboot twrp recovery.
-Then flash this by twrp
Rmm disable security :
Link:
https://forum.xda-developers.com/attachment.php?attachmentid=4481843&d=1524258795
-then flash magisk :
Link:
https://github.com/topjohnwu/Magisk/releases/download/v18.1/Magisk-v18.1.zip
---------- Post added at 08:52 PM ---------- Previous post was at 08:49 PM ----------
Don't flash stock send picture from download mode may by another phone and upload it .
Click to expand...
Click to collapse
wow.. i just bought this phone and want root access due to dev needings. i study programming and i was looking for twrp and some way to get root. and you just posted this!. :laugh::laugh::highfive:
just want to know if this works? becuase i already found twrp for the j4+ but was looking for the normal J4.
also i need to learn everything about the prenormal stuff and all that before rooting. but you're a lifesaver.
kapmino269 said:
Flash RMM-State_Bypass_Mesa_v2.zip after installing twrp .
Click to expand...
Click to collapse
I'll do soon as I can.
Forgot to say.. how do you enable oem unlock on this device? Do I have to wait a whole week with it turned on? I want all the necessary information before installing TWRP and rooting. Also.. what about Android pie? Because Samsung posted that they will update this device to Android Pie, same for the j4+ one. I don't want to softbrick the phone or lose root when updating.
Sent from my Samsung SM-J400M using XDA Labs
Alguien tiene algun kernel para el j4lte que funciome para el nethunter ?
Es lo mismo J400 M que J400F
No entiendo ,porque parten hablando del j400 M y terminan dando remedios para el J400 F ....
Just came here as a way to thank everyone for this thread and say that the twrp for j4lte works perfect fine for SM-J400m on latest version android 10. Just enable OEM lock and flash it through ODIN.
[QUOTE = "endmjwknj, postagem: 84400367, membro: 11390151"]
Vim aqui como uma forma de agradecer a todos por este tópico e dizer que o twrp para j4lte funciona perfeitamente bem para SM-J400m na versão mais recente do Android 10. Basta habilitar o bloqueio de OEM e atualizá-lo através do ODIN.
[/CITAR]
can you help me install twrp on android 10 on j400m?
can you help me install twrp on android 10 on j400m?
brunoyp said:
[QUOTE = "endmjwknj, postagem: 84400367, membro: 11390151"]
Vim aqui como uma forma de agradecer a todos por este tópico e dizer que o twrp para j4lte funciona perfeitamente bem para SM-J400m na versão mais recente do Android 10. Basta habilitar o bloqueio de OEM e atualizá-lo através do ODIN.
[/CITAR]
can you help me install twrp on android 10 on j400m?
Click to expand...
Click to collapse
i could but there are guys who are more experienced to help you through all the process. Join this telegram group https://t.me/SamsungGalaxyJ4 and they're certainly assist you without a doubt.
Exynos Galaxy J4 is kind of similar to J3 2017 in terms of chipset and resolution so TWRP and ROMs of J3 2017 may work on J4.
Samsung Galaxy J3 (2017) ROMs, Kernels, Recoveries
Improve your Samsung Galaxy J3 (2017)'s battery life, performance, and look by rooting it and installing a custom ROM, kernel, and more.
forum.xda-developers.com

[ROM][STOCK][SPtools, Recovery&OSTLA][TA-1028] Android 7.1 - 8.0 - 8.1 - 9

Basically, all the ROMs I've found and used on my cell phone
According to Nokia support, all variants are the same, only the supported SIMs vary
So
Support Variant: TA-1028, TA-1038, TA-1032, TA-1020 (Theoretically)
Tested only on TA-1028
some are for mounting with SP tools, and others through the option Update From SDcard, in the recovery
And one for OSTLA(to recover bricks)
>>>OSTLA<<<
OSTLA Software
Version: 7.1
NE1-215H-0-00WW-B02.nb0
>>>SPTools<<<
SPTools(DA Included)
Version: 7.1(2.15H)December 2017
NE1-215H-0-00WW-B02
Version: 8.0(3.380) July 2018
NE1-3380-0-00WW-B01
Version: 8.1(4.42D) December 2018
NE1-442D-0-00WW-B01
>>>RECOVERY<<<
Version: 8.1(4.43E) May 2019
NE1-443E-0-00WW-B01(update)
Version: 9.0(5.120) May 2019
NE1-5120-0-00WW-B01(update)
all SPTool version they have their scatter inside
P.D:I am not an English speaker, so if you notice that everything is misread, it is to translate
Thanks
Thank you I'll try those stock rom on my hard brick Nokia 1028.. any other rom with ost (no working just connect your phone at the bottom) or flash tool works.. (flash tool ask for auth file)
Can't find tool
Can you upload all the tools you used? I can't find a working one
Upload a working driver too
tadpole975 said:
Thank you I'll try those stock rom on my hard brick Nokia 1028.. any other rom with ost (no working just connect your phone at the bottom) or flash tool works.. (flash tool ask for auth file)
Click to expand...
Click to collapse
Normally, when you request AUTH file, it is because you are using the wrong button combination, or you have not selected the correct download-agent
xuanhaivptthn said:
Can you upload all the tools you used? I can't find a working one
Upload a working driver too
Click to expand...
Click to collapse
added files.
DA included in the sptools folder.
The drivers you can use are in the OSTLA folder
djxpro said:
added files.
DA included in the sptools folder.
The drivers you can use are in the OSTLA folder
Click to expand...
Click to collapse
Thanks!
Anyways, my friend had a Nokia 3 TA-1032 on Android 9 lasted security build (i dont remember that) but he was trying to unlock bootloader. There are some tutorials on how to do that, but they all using Android 7 and/or Android 8.1 so he used SP Flash Tool to downgrade to Android 7 and now his phone is bricked. Do you have any idea on how to fix his phone?
---------- Post added at 12:52 PM ---------- Previous post was at 12:46 PM ----------
Extra information, after flashing his phone using SP Flash Tool, the phone won't turn on, it just keep vibrating, like bootloop. So he formatted whole flash using SP Flash Tool, he thought that he can just format and flash again like with Windows, but now it doesn't even vibrate
xuanhaivptthn said:
Thanks!
Anyways, my friend had a Nokia 3 TA-1032 on Android 9 lasted security build (i dont remember that) but he was trying to unlock bootloader. There are some tutorials on how to do that, but they all using Android 7 and/or Android 8.1 so he used SP Flash Tool to downgrade to Android 7 and now his phone is bricked. Do you have any idea on how to fix his phone?
---------- Post added at 12:52 PM ---------- Previous post was at 12:46 PM ----------
Extra information, after flashing his phone using SP Flash Tool, the phone won't turn on, it just keep vibrating, like bootloop. So he formatted whole flash using SP Flash Tool, he thought that he can just format and flash again like with Windows, but now it doesn't even vibrate
Click to expand...
Click to collapse
use OSTLA (ROM Android 7.1), if it works on the first try, fine.
If the process fails (after flashing the bootloader, according to the application states), try again with sptools (Rom 7.1).
if it doesn't work either, try ROM 8.0 with sptools
I went through a lot of bricks, and managed to fix them trying anyway. Just try until you turn on.
in this same forum, there is the correct way to unlock the bootloader in android 9, since what changes are the commands to use in the ADB
djxpro said:
use OSTLA (ROM Android 7.1), if it works on the first try, fine.
If the process fails (after flashing the bootloader, according to the application states), try again with sptools (Rom 7.1).
if it doesn't work either, try ROM 8.0 with sptools
I went through a lot of bricks, and managed to fix them trying anyway. Just try until you turn on.
in this same forum, there is the correct way to unlock the bootloader in android 9, since what changes are the commands to use in the ADB
Click to expand...
Click to collapse
OSTLA doesn't recognize his phone, but I read online that SP Tools only works if the bootloader has been unlocked so...?
I will try those ROM anyways
Download miracle thunder from this link https://androidfilehost.com/?fid=11410963190603915389 Now Install in your pc click on write button and select scatter file (Android 7.1 ROM) you can see there is universal written just click on that and select Nokia 3...Now click on start button and connect your phone press volume up down button to detect your device and it will definitely unbrick your phone after that you need to write your IMEI cause previously you done with format all + download this will delete entire emmc partition nvram...
Thanks me later it will work?
To unlock bootloader of NOKIA 3 in Android pie 9.0 follow my thread I wrote the instructions ????
https://forum.xda-developers.com/nokia-3/how-to/method-to-unlock-bootloader-nokia-3-pie-t4012285
Sent from my NE1 using XDA Labs
Arin59 said:
Download miracle thunder from this link https://androidfilehost.com/?fid=11410963190603915389 Now Install in your pc click on write button and select scatter file (Android 7.1 ROM) you can see there is universal written just click on that and select Nokia 3...Now click on start button and connect your phone press volume up down button to detect your device and it will definitely unbrick your phone after that you need to write your IMEI cause previously you done with format all + download this will delete entire emmc partition nvram...
Thanks me later it will work
To unlock bootloader of NOKIA 3 in Android pie 9.0 follow my thread I wrote the instructions ??
https://forum.xda-developers.com/nokia-3/how-to/method-to-unlock-bootloader-nokia-3-pie-t4012285
Sent from my NE1 using XDA Labs
Click to expand...
Click to collapse
Doesn't work. Any ideas?
Gracias hermano, sucede que instale una ROM sin estar desbloqueado mi telefono, ni el blootloader, asi que me quedo en la pantalla de recovery y de ahi no pasaba, me descargue el recovery que dejaste, lo instale desde la SD y recupere el sistema, ahora si puede desbloquear el cargador de inicio de manera correcta y todo quedo solucionado.
MIL GRACIAS EN VERDAD PROBÉ DE TODO Y ESTE FUE EL ÚNICO QUE ME FUNCIONO, DIOS TE BENDIGA.
Kofseven said:
Gracias hermano, sucede que instale una ROM sin estar desbloqueado mi telefono, ni el blootloader, asi que me quedo en la pantalla de recovery y de ahi no pasaba, me descargue el recovery que dejaste, lo instale desde la SD y recupere el sistema, ahora si puede desbloquear el cargador de inicio de manera correcta y todo quedo solucionado.
MIL GRACIAS EN VERDAD PROBÉ DE TODO Y ESTE FUE EL ÚNICO QUE ME FUNCIONO, DIOS TE BENDIGA.
Click to expand...
Click to collapse
acabo de ver estos msg viejo, estuve fuera mucho tiempo por culpa del trabajo.
genial que hayas podido arreglarlo.
es bueno ser de ayuda D:

Question flashed RETAPAC firmware successful but “Software Channel” still retcn??

Hi there
I got my new edge S, it's a China version. I unlocked it and flashed RETAPAC firmware (XT2125-4_NIO_RETAPAC_JP_11_RRT31.Q1-20-43-1_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip) successful, everything is OK, the Device Name changed to moto g (100), but, “Software Channel” still retcn? Is that meaning when it update it will get Chinese firmware? Oh no! No **** CN rom! How to change the Software Channel to APAC? Thanks!
And another question: which firmware only contain google service and google play? I only need these two google apps, I do not want google Assistant, one, calendar, photo, yuotube etc, these are in the RETAPAC firmware.
Thanks a lot!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
dfert said:
Hi there
I got my new edge S, it's a China version. I unlocked it and flashed RETAPAC firmware (XT2125-4_NIO_RETAPAC_JP_11_RRT31.Q1-20-43-1_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip) successful, everything is OK, the Device Name changed to moto g (100), but, “Software Channel” still retcn? Is that meaning when it update it will get Chinese firmware? Oh no! No **** CN rom! How to change the Software Channel to APAC? Thanks!
And another question: which firmware only contain google service and google play? I only need these two google apps, I do not want google Assistant, one, calendar, photo, yuotube etc, these are in the RETAPAC firmware.
Thanks a lot!
View attachment 5322783
Click to expand...
Click to collapse
I don't think you can change the software channel, it's in the efs or something that you shouldn't mess with.
when there's an update you will need to flash manually.
sd_shadow said:
I don't think you can change the software channel, it's in the efs or something that you shouldn't mess with.
when there's an update you will need to flash manually.
Click to expand...
Click to collapse
I see, give up auto update....
And sir, do you know which region's firmware only contain google service and google play? No other google app like google Assistant, one, calendar, photo, yuotube etc, RETEU or RETAIL?
RETEU: XT2125-4_NIO_RETEU_11_RRTS31.Q1-20-14-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
RETAIL: NIO_RETAIL_11_RRTS31.Q1-20-24-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
yes, I just flashed my Chinese Edge S firmware to EU firmware. And I got this issue too. Any one can solve it ?
And also, I have another problem. How can I remove the bootloader unlocked error when boot up?
Thank you
skyers13 said:
yes, I just flashed my Chinese Edge S firmware to EU firmware. And I got this issue too. Any one can solve it ?
And also, I have another problem. How can I remove the bootloader unlocked error when boot up?
Thank you
Click to expand...
Click to collapse
First of all, Software Channel does NOT change no matter which firmware you flash.
Secondly you cannot remove the the bootloader unlocked message and it is NOT an error, it is the warning you get for UNLOCKING the bootloader.
Electimon said:
First of all, Software Channel does NOT change no matter which firmware you flash.
Secondly you cannot remove the the bootloader unlocked message and it is NOT an error, it is the warning you get for UNLOCKING the bootloader.
Click to expand...
Click to collapse
ok.. thanks.
skyers13 said:
sí, acabo de actualizar el firmware de mi Edge S chino al firmware de la UE. Y también tengo este problema. ¿Cualquiera puede resolverlo?
Y también tengo otro problema. ¿Cómo puedo eliminar el error de desbloqueo del cargador de arranque al arrancar?
Gracias
Click to expand...
Click to collapse
hola, ¿instalaste rom global retapac o reteu en tu moto edge chino? Como dice el colega, el canal no va a cambiar. Me interesa saber si reciben ota y no hay problema, ¿qué usaste para instalar stock rom? rsdlite or comand adb fastboot
iron maiden said:
hola, ¿instalaste rom global retapac o reteu en tu moto edge chino? Como dice el colega, el canal no va a cambiar. Me interesa saber si reciben ota y no hay problema, ¿qué usaste para instalar stock rom? rsdlite or comand adb fastboot
Click to expand...
Click to collapse
Hi, yes, I flashed my Chinese Edge S to RETEU ROM. You need to use RSD tool to flash another ROM. But I'm now facing a problem, I can't update through OTA. I know that there are new ROM released, but no update message when I click system update. I still finding solution how to flash a new ROM without lose my data. I don't want to backup data and reinstall APP again.
If you flash wrong region you cannot take anymore OTA updates
dfert said:
Hola
Conseguí mi nuevo edge S, es una versión de China. Lo desbloqueé y flasheé el firmware RETAPAC (XT2125-4_NIO_RETAPAC_JP_11_RRT31.Q1-20-43-1_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip) con éxito, todo está bien, el nombre del dispositivo cambió a moto g (100), pero, “Software Channel ¿Todavía retcn? ¿Significa eso que cuando se actualice obtendrá firmware chino? ¡Oh, no! No **** CN rom! ¿Cómo cambiar el canal de software a APAC? ¡Gracias!
Y otra pregunta: ¿qué firmware solo contiene el servicio de Google y Google Play? Solo necesito estas dos aplicaciones de Google, no quiero Google Assistant, una, calendario, foto, yuotube, etc., estas están en el firmware RETAPAC.
¡Muchas gracias!
View attachment 5322783
Click to expand...
Click to collapse
Hola amigo, ¿puedes ayudarme? Necesito un tutorial de cómo flash edge S n Unlock BL Ty bro
Kal84 said:
Hola amigo, ¿puedes ayudarme? Necesito un tutorial de cómo flash edge S n Unlock BL Ty bro
Click to expand...
Click to collapse
hi,
Actually you need go to official website to unlock your bootloader. Please follow the website instruction to generate the unquie key.
Official Motorola Site UNLOCK BOOTLOADER
Unlocking the Bootloader | Motorola Support US
Visit the customer support page to view user guides, FAQs, bluetooth pairing, software downloads, drivers, tutorials and to get repair and contact us information.
motorola-global-portal.custhelp.com
After you received a mail from motorola, you can use ADB tool to unlock bootloader through below command
fastboot oem unlock UNIQUE_KEY(email has this key)
ADB tool download site:
[OFFICIAL][TOOL][WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3
15 seconds ADB Installer v1.4.3 ADB, Fastboot and Drivers What is this? This is All-in-One installer for 3 most needed PC tools for Android. No need to download big SDK for 3 small things. I originaly made it for my Kurdish friend AnGrY DuDe in...
forum.xda-developers.com

P40 Pro - ELS-NX9 (ELS-N29) - Huawei ID / FRP Lock problem

Hey guys,
the problem looks like this: I bought an used P40 Pro (with a little display damage) with a Huawei ID/FRP lock, which I honestly didn't understand before or even know that this leads to a problem. So I simply can not use that device. I have now done a lot of research and found that probably in my area only Huawei itself can remove the lock, but they MUST unfortunately also repair the display damage, which drives the cost so high that I can buy a new phone right away.
After more research, I found out that you can probably downgrade to the EMUI 10 use the emergancy backup function (in EMUI 11 not available for me) to bypass the problem. However, I can't find a firmware that fits my phone and I can flash it via the dload method. Using the HISuite proxy method, the phone must already be unlocked to be able to flash it.
Now my questions:
1. Is it correct that I can bypass the Huawei ID lock with EMUI 10 (e.g. 10.1.0.176) (many YouTube videos show that)?
2. Where can I find the correct firmware for my device or can I download somehow it from https://www.firmfinder.ml/ or https://pro-teammt.ru/en/online-firmware-database/ for the dlog method? How to search actually for that?
3. On http://huawei-firmware.com/ there are the right numbers but its for the P40 Pro+ what I really not understand why the build numbers are same. (Edit: no there are not EMUI 10 versions)
4. Can I use maybe similar firmwares? Instead of C432E3R6P4 it would be C432E8R6P1 or so. Will this even flash or show me only an error.
5. I tried to flash this firmware https://disk.yandex.ru/d/NrGTS46l8zcWtg/Huawei-Honor/Huawei P40 pro Huawei ID but it shows me an error that the version does not fit. Why?
Please, can someone point me to the right direction because I really dont know what to do rigth now.
Current cell phone data:
____________________________
Model : ELS-NX9
IMEI : FAILED
Build Number : ELS-N29 11.0.0.230(C432E3R6P4)
Battery : 4326MV
Checking Bootloader...LOCKED
Device Firmware: :ELS-N29 11.0.0.230(C432E3R6P4)
Base Firmware: :ELS-LGRP4-OVS 11.0.0.230
Custom Firmware: :ELS-N29-CUST 11.0.0.3(C432)
Preload Firmware: :ELS-N29-PRELOAD 11.0.0.4(C432R6)
Device FB Lock: LOCKED
Device USER Lock: LOCKED
On that site is a mixture of firmware and phone names. In fact, N39 is P40 Pro plus and N29 is P40 Pro.
badmania98 said:
On that site is a mixture of firmware and phone names. In fact, N39 is P40 Pro plus and N29 is P40 Pro.
Click to expand...
Click to collapse
Do you mean on http://huawei-firmware.com/ ? Actually I must have looked in the wrong place. There is no 10 version there.
Why dont you ask the seller?
badmania98 said:
Why dont you ask the seller?
Click to expand...
Click to collapse
The seller is a used goods dealer and he got that phone already locked. I have only the email on the phone with some *** inside. If I would know the whole Email I would write him but its not possible. Maybe its possible to extract somehow that email from that phone?
Olá pessoal. Existe alguma ajuda para resolver um P40 pro que está bloqueado para huawei id? Alguns métodos incluem backup de emergência, mas acho que não funciona com o firmware 11.0.0.180.
É possível fazer uma reversão para algum firmware 10.xxxxx? Acho que a reversão com o proxy huawei não funcionaria, porque não seria possível conectá-lo a uma suíte hi .... alguma sugestão? Agradeço antecipadamente ..

Categories

Resources