Related
Could anyone please help me out? I have a bricked device and am looking into how to unbrick it.
I'm particularly interested if the English version of HiSuite which says it supports the L09 and L29 actually does.
Could anyone with an L29 or an L09 please put their device in fastboot and try the system recovery from hisuite:
http://consumer.huawei.com/minisite/HiSuite_en/
A new version which supposedly supports the phones was released.
Could anyone confirm if this works?
cmon guys, help out this man, so that he can continue to help us with new firmware updates
Sent from my Huawei Mate 8 NXT-AL10 using Tapatalk
I did it with a L29 device. The app says Device is in recovery mode, and once I clicked next, It says your device is not supported for system recovery. Please take your device to a nearby huawei service center.
If your device is unlocked reflash through fastboot
Sent from my HUAWEI NXT-L29 using Tapatalk
M.Noury said:
If your device is unlocked reflash through fastboot
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
I wish that I could do that, but there are partitions that I can't flash with fastboot, which I did flash using other means when reverse engineering the updates. Those are the partitions which are broken and don't allow my phone to boot, or show anything on the screen for that matter.
There is a restore mechanism built into Huawei's fastboot to get into a separate restore mode, but I think there is a special recovery image needed which the Huawei Hisuite app can access. I just don't know how to find it when all the devices come back as unsupported, despite being shown as supported in the documentation. It's very strange.
This is something that Sony had done with two hidden partitions FOTA and TA . This makes the device unbrickable and also.Have the OEM ways to keep the boot locked with hidden features.
Hisuite latest Windows app has these features to restore and when I tried,it scanned my.phone and found.My.phone to be working fine.
1) start the hisuite App on pc
2) connect to the phone in fastboot mode
3) restore
4) the app scans and looks for the partitions and then restores the bricked phone ONLY
---------- Post added at 12:58 PM ---------- Previous post was at 12:55 PM ----------
Sorry to make this as another post
After downloading from that site the app is old edition.
After installing, check updates and you get latest hisuite app with material design with more features.
If anyone wants, I can upload the app which is 30+mb
bluheart said:
This is something that Sony had done with two hidden partitions FOTA and TA . This makes the device unbrickable and also.Have the OEM ways to keep the boot locked with hidden features.
Hisuite latest Windows app has these features to restore and when I tried,it scanned my.phone and found.My.phone to be working fine.
1) start the hisuite App on pc
2) connect to the phone in fastboot mode
3) restore
4) the app scans and looks for the partitions and then restores the bricked phone ONLY
---------- Post added at 12:58 PM ---------- Previous post was at 12:55 PM ----------
Sorry to make this as another post
After downloading from that site the app is old edition.
After installing, check updates and you get latest hisuite app with material design with more features.
If anyone wants, I can upload the app which is 30+mb
Click to expand...
Click to collapse
Duraaraa I was wondering if the suggestion from Bluheart resolved your issues
---------- Post added at 06:59 PM ---------- Previous post was at 06:58 PM ----------
Duraaraa I was wondering if the suggestion from Bluheart resolved your issues
duraaraa said:
Could anyone please help me out? I have a bricked device and am looking into how to unbrick it.
I'm particularly interested if the English version of HiSuite which says it supports the L09 and L29 actually does.
Could anyone with an L29 or an L09 please put their device in fastboot and try the system recovery from hisuite:
http://consumer.huawei.com/minisite/HiSuite_en/
A new version which supposedly supports the phones was released.
Could anyone confirm if this works?
Click to expand...
Click to collapse
Hi, I have a mate 8 NXT-L09 with C212B120 firmware, I tried the procedure you describe because I unlocked the bootloader, installed TWRP and rooted only to discover I did not like the out come, I lost some functionality of the huawei themes app and now I like to go back to its original out of the box state, to make long story short (not really), the huawei tool says it doesnt recognize the device and that I should take it to them for repairs, I tried this while i had TWRP and also while I had stock recovery on the device.
I wonder if it doesnt recognize the device because its rooted or with an unlocked bootloader?, im tempted to unroot and relock the bootloader and see if that will do the trick?, if i try this ill let you know what goes.
Cheers.
rom stock l09c212b120
danywalkert said:
Hi, I have a mate 8 NXT-L09 with C212B120 firmware, I tried the procedure you describe because I unlocked the bootloader, installed TWRP and rooted only to discover I did not like the out come, I lost some functionality of the huawei themes app and now I like to go back to its original out of the box state, to make long story short (not really), the huawei tool says it doesnt recognize the device and that I should take it to them for repairs, I tried this while i had TWRP and also while I had stock recovery on the device.
I wonder if it doesnt recognize the device because its rooted or with an unlocked bootloader?, im tempted to unroot and relock the bootloader and see if that will do the trick?, if i try this ill let you know what goes.
Cheers.
Click to expand...
Click to collapse
bunas danywalkert mira tengo un mate 8 de iusacel de fabrica venia con nxt-l09c212b120 y lo actulice a ala vercion b170 peor no hice un back up =( ahora tengo la vercion nxt-l0900b170 y tengo algunos errores como el de temas y otros mee gustaria saber si puedo regresar ami rom original y como le puedo hacer ? me podrias pasar tu backup o donde podria conseguir la rom original espero me puedas ayudar de ante mano muchas gracias.
Sorry amigo, only english is allowed in this forum.
alangastic said:
bunas danywalkert mira tengo un mate 8 de iusacel de fabrica venia con nxt-l09c212b120 y lo actulice a ala vercion b170 peor no hice un back up =( ahora tengo la vercion nxt-l0900b170 y tengo algunos errores como el de temas y otros mee gustaria saber si puedo regresar ami rom original y como le puedo hacer ? me podrias pasar tu backup o donde podria conseguir la rom original espero me puedas ayudar de ante mano muchas gracias.
Click to expand...
Click to collapse
Hi there, sorry for taking this long, didnt realize I had a message on this thread, hopefuly you already fixed your situation, if not, let me know, for sure I can help.
Saludos.
Hi.
I can't unlock my bootloader, since i can't get my bootloader unlock code.
I've tried it a lot of times and i'm sure that IMEI, Serial number and Product ID are correct.
I guess that the problem is because all i have as a modell number is "JAZZ".
My build number is MT7-C900B512
(I've had some previous experience with Huawei phones, and i guess that build number is missing a part, but thats all that is showing up, that's how i got this phone from my father)
Downgrade to lolipop and try unlock again
chudy_85 said:
Downgrade to lolipop and try unlock again
Click to expand...
Click to collapse
How to do that without root and with locked BL?
Any help on downgrading?
chudy_85 said:
Downgrade to lolipop and try unlock again
Click to expand...
Click to collapse
How do you want me to downgrade?
HuanitoBRB said:
Hi.
I can't unlock my bootloader, since i can't get my bootloader unlock code.
I've tried it a lot of times and i'm sure that IMEI, Serial number and Product ID are correct.
I guess that the problem is because all i have as a modell number is "JAZZ".
My build number is MT7-C900B512
(I've had some previous experience with Huawei phones, and i guess that build number is missing a part, but thats all that is showing up, that's how i got this phone from my father)
Click to expand...
Click to collapse
Try to get your unlock code using HCU client. Its a paid service. It will cost you 4 euro.
Sometimes the unlock code with huawei database and one stored in your phone dows not match.
Hcu client will read code from your phone itself and it will surely work.
Tengo él mismo problema con mi JAZZ no lo puedo rootear y no consigo el código de desbloquear en la página de huawei ayuda o como puedo bajar el android que es 6.0 en mi equipo?
Hello.
Hey someone knows anything about the version "J4" without the "+" i have one, the Samsung Galaxy J4 Model: SM-J400M i'm trying to unlock the bootloader using this instructions but i do the thing but nothing happend. Also i tried changing the date, resetting the phone or enabling and disabling the knox feature etc etc... but the OEM line does not appears in developer options.
Specs info: CPU-Z
help?
Also the phone it tends a lot of random unexpectedly shutting down, especially playing games... :crying:
kapmino269 said:
Also J4+
Does your phone support treble Rom ?
Click to expand...
Click to collapse
How i can check that?
kapmino269 said:
Write in play store
check treble
And download app .
Click to expand...
Click to collapse
supposedly Yes.
New Picture. https://prnt.sc/n26sz5
kapmino269 said:
@Jorgeapp
Upload picture in another site this site is unsafe or upload it by xda labs apk .
I can't find picture in that site .
Also you don't need to ask for that just google "how to check treble support ".
Click to expand...
Click to collapse
I finally finish the Prenormal RMM state and when i turn ON the OEM unlock the phone restart and return to the factory mode, i check again and the OEM unlock is missing like nothing happend... i dont know what to do, no one has rooted my device... all tutorials are for others models. i also try using kingroot and similars and nothing.
what a disappointment.
Jorgeapp said:
I finally finish the Prenormal RMM state and when i turn ON the OEM unlock the phone restart and return to the factory mode, i check again and the OEM unlock is missing like nothing happend... i dont know what to do, no one has rooted my device... all tutorials are for others models. i also try using kingroot and similars and nothing.
what a disappointment.
Click to expand...
Click to collapse
Hi! I've the same model as you, and it looks like samsung it's updating without the option now.
I wrote about this about 2 month ago i think, if you want you can read it here:
https://forum.xda-developers.com/general/help/oem-t3892877
But, if you want modify some layers read about Andromeda and Substratum here:
https://forum.xda-developers.com/apps/substratum/official-starting-substratum-andromeda-t3798316
kapmino269 said:
Reflash stock and try again alo you can root your j400f:
Unlock oem from DEVELOPERS DEVELOPERS OPTION
Then
- Go to download mode .
-Flash this with odin .
https://github.com/TwrpBuilder/andr....2.3-TwrpBuilder-j4ltejx-2018-10-22_17-38.tar
-Reboot twrp recovery.
-Then flash this by twrp
Rmm disable security :
Link:
https://forum.xda-developers.com/attachment.php?attachmentid=4481843&d=1524258795
-then flash magisk :
Link:
https://github.com/topjohnwu/Magisk/releases/download/v18.1/Magisk-v18.1.zip
---------- Post added at 08:52 PM ---------- Previous post was at 08:49 PM ----------
Don't flash stock send picture from download mode may by another phone and upload it .
Click to expand...
Click to collapse
wow.. i just bought this phone and want root access due to dev needings. i study programming and i was looking for twrp and some way to get root. and you just posted this!. :laugh::laugh::highfive:
just want to know if this works? becuase i already found twrp for the j4+ but was looking for the normal J4.
also i need to learn everything about the prenormal stuff and all that before rooting. but you're a lifesaver.
kapmino269 said:
Flash RMM-State_Bypass_Mesa_v2.zip after installing twrp .
Click to expand...
Click to collapse
I'll do soon as I can.
Forgot to say.. how do you enable oem unlock on this device? Do I have to wait a whole week with it turned on? I want all the necessary information before installing TWRP and rooting. Also.. what about Android pie? Because Samsung posted that they will update this device to Android Pie, same for the j4+ one. I don't want to softbrick the phone or lose root when updating.
Sent from my Samsung SM-J400M using XDA Labs
Alguien tiene algun kernel para el j4lte que funciome para el nethunter ?
Es lo mismo J400 M que J400F
No entiendo ,porque parten hablando del j400 M y terminan dando remedios para el J400 F ....
Just came here as a way to thank everyone for this thread and say that the twrp for j4lte works perfect fine for SM-J400m on latest version android 10. Just enable OEM lock and flash it through ODIN.
[QUOTE = "endmjwknj, postagem: 84400367, membro: 11390151"]
Vim aqui como uma forma de agradecer a todos por este tópico e dizer que o twrp para j4lte funciona perfeitamente bem para SM-J400m na versão mais recente do Android 10. Basta habilitar o bloqueio de OEM e atualizá-lo através do ODIN.
[/CITAR]
can you help me install twrp on android 10 on j400m?
can you help me install twrp on android 10 on j400m?
brunoyp said:
[QUOTE = "endmjwknj, postagem: 84400367, membro: 11390151"]
Vim aqui como uma forma de agradecer a todos por este tópico e dizer que o twrp para j4lte funciona perfeitamente bem para SM-J400m na versão mais recente do Android 10. Basta habilitar o bloqueio de OEM e atualizá-lo através do ODIN.
[/CITAR]
can you help me install twrp on android 10 on j400m?
Click to expand...
Click to collapse
i could but there are guys who are more experienced to help you through all the process. Join this telegram group https://t.me/SamsungGalaxyJ4 and they're certainly assist you without a doubt.
Exynos Galaxy J4 is kind of similar to J3 2017 in terms of chipset and resolution so TWRP and ROMs of J3 2017 may work on J4.
Samsung Galaxy J3 (2017) ROMs, Kernels, Recoveries
Improve your Samsung Galaxy J3 (2017)'s battery life, performance, and look by rooting it and installing a custom ROM, kernel, and more.
forum.xda-developers.com
So, I have a P40 Pro ELS-N04 with build no. 10.1. 0.148 (C792E7R3P1)
Canadian user here.
I tried using googefier, and concluded I would need to downgrade for it to be able to use LZplay, a lot of people seem to suggest .131 for this, so I've been looking around for the firmware to use or how to proceed.
I've searched a few firmware sources and haven't had anything come up for some reason.
I did see a link on ictfix (new user, can't share link) , which lists ELS-N04 in the YouTube title, but not the download link, but I'm not sure how to verify this without bricking my phone...
Am I right in the simplest list way to do this as well is with a USB?
And that it previously could be done with standard HiSuite, but newer versions have anti rollback and older HiSuite can't connect to newer devices?
Any advice would be appreciated.
Keep on keeping on!
Savageperson said:
So, I have a P40 Pro ELS-N04 with build no. 10.1. 0.148 (C792E7R3P1)
Canadian user here.
I tried using googefier, and concluded I would need to downgrade for it to be able to use LZplay, a lot of people seem to suggest .131 for this, so I've been looking around for the firmware to use or how to proceed.
I've searched a few firmware sources and haven't had anything come up for some reason.
I did see a link on ictfix (new user, can't share link) , which lists ELS-N04 in the YouTube title, but not the download link, but I'm not sure how to verify this without bricking my phone...
Am I right in the simplest list way to do this as well is with a USB?
And that it previously could be done with standard HiSuite, but newer versions have anti rollback and older HiSuite can't connect to newer devices?
Any advice would be appreciated.
Keep on keeping on!
Click to expand...
Click to collapse
Just got my P40 Pro as well, and also a Canadian user with the exact model and build number as yours.
Were you able to find the firmware link for our version of this phone?
Rhombuss said:
Just got my P40 Pro as well, and also a Canadian user with the exact model and build number as yours.
Were you able to find the firmware link for our version of this phone?
Click to expand...
Click to collapse
Was anyone able to find the firmware?
Randomcitizen237 said:
Was anyone able to find the firmware?
Click to expand...
Click to collapse
Hey guys fellow Canadian here, I have the same model as you guys and have managed to downgrade and install GMS on my device.
Here is a great guide on how to downgrade your device using HiSuite and HiSuite Proxy:
I have went ahead and grabbed the links you guys will need to paste into HiSuite Proxy to downgrade your device. I recommend using 10.1.0.121.
FileList/Package URL:
http://update.dbankcdn.com/TDS/data/files/p3/s15/G5633/g1604/v392311/f1/full/filelist.xml
Update Information (Paste this in the small box next to the package URL on HiProxy):
ELS-LGRP4-OVS 10.1.0.121
Full update download link if you want it for some reason:
http://update.dbankcdn.com/TDS/data/files/p3/s15/G5633/g1604/v392311/f1/full/update_full_base.zip
Hope you guys figure it out!
Randomcitizen237 said:
Was anyone able to find the firmware?
Click to expand...
Click to collapse
Unfortunately no luck so far. I PMed bender007 but have not received a response yet.
Rhombuss said:
Unfortunately no luck so far. I PMed bender007 but have not received a response yet.
Click to expand...
Click to collapse
I legit just posted a working firmware. 10.1.0.121. Currently running it.
After using ELS-LGRP4-OVS 10.1.0.121, you can update to new firmware by OTA on your phone?
I noted that I did as ictfix guide (10.1.0.131 and 10.1.0.134) and mobile cannot update by OTA. It is stopping at version 10.1.0.134 due to used ELS-NX9
You will have to update to EMUI 11 using the same method as downgrading. Use firmware finder to find the proper Firmware for your device and after installing GMS etc you can update using HiSuite and HiSuite Proxy.
My phone is the original firmware version ELS-LGRP4-OVS 10.1.0.148 (C792E7R3P1).
I downgraded to both ELS-LGRP4-OVS 10.1.0.131, ELS-LGRP4-OVS 10.1.0.134 to install GMS, I tried many times but the phone lost OTA.
I have just updated to version ELS-LGRP4-OVS 10.1.0.148 and, now I can update the phone by OTA.
Perhaps the phone is flagship with version ELS-LGRP4-OVS 10.1.0.148 (C792E7R3P1), so the phone cannot update OTA on ELS-LGRP4-OVS 10.1.0.131, ELS-LGRP4-OVS 10.1.0.134. And we need update to original version to get OTA.
Randomcitizen237 said:
Was anyone able to find the firmware?
Click to expand...
Click to collapse
Please see my comment at #8, thanks.
xSimplyEpic said:
Full update download link if you want it for some reason:
http://update.dbankcdn.com/TDS/data/files/p3/s15/G5633/g1604/v392311/f1/full/update_full_base.zip
Hope you guys figure it out!
Click to expand...
Click to collapse
Ho do you install the full firmware on the phone?
x4ce said:
Ho do you install the full firmware on the phone?
Click to expand...
Click to collapse
Watch the video I linked, all you need to a few links pasted into HiProxy and run HiSuite on your computer. With the proxy running, HiSuite will think your phone has a regular update etc. However, it will the firmware you specified.
xSimplyEpic said:
Watch the video I linked, all you need to a few links pasted into HiProxy and run HiSuite on your computer. With the proxy running, HiSuite will think your phone has a regular update etc. However, it will the firmware you specified.
Click to expand...
Click to collapse
Thanks for the message, That I know.
I mean how to install a full firmware that I have downloaded..
Cheers,
X4ce
xSimplyEpic said:
Watch the video I linked, all you need to a few links pasted into HiProxy and run HiSuite on your computer. With the proxy running, HiSuite will think your phone has a regular update etc. However, it will install the firmware you specified.
Click to expand...
Click to collapse
[QUOTE = "VVVNNN, publicación: 84311317, miembro: 11375151"]
Mi teléfono tiene la versión de firmware original ELS-LGRP4-OVS 10.1.0.148 (C792E7R3P1).
Bajé a ELS-LGRP4-OVS 10.1.0.131, ELS-LGRP4-OVS 10.1.0.134 para instalar GMS, lo intenté muchas veces pero el teléfono perdió OTA.
Acabo de actualizar a la versión ELS-LGRP4-OVS 10.1.0.148 y ahora puedo actualizar el teléfono por OTA.
Quizás el teléfono sea insignia con la versión ELS-LGRP4-OVS 10.1.0.148 (C792E7R3P1), por lo que el teléfono no puede actualizar OTA en ELS-LGRP4-OVS 10.1.0.131, ELS-LGRP4-OVS 10.1.0.134. Y necesitamos actualizar a la versión original para obtener OTA.
[/ CITA
despues de actualizar de 131 a 148 perdiste lo de google o se mantuvo
pregunto por que yo lo degrade para google y si lo subo con proxy a 148 se pierde o de 148 puedo subirlo a google de nuevo ??
No comprendo.
+57320213 23 93
x4ce said:
Thanks for the message, That I know.
I mean how to install a full firmware that I have downloaded..
Cheers,
X4ce
Click to expand...
Click to collapse
Were you able to download from the link above. I continue to get errors both in browser and in HiSuite Proxy. Do you still have this .zip file?
I too am a Canadian with a P40 Pro ELS-N04 with build no. 10.1. 0.148 (C792E7R3P1). I can not seem to get links from #3 and #10 above to work. In fact nothing appear to work from the http://update.dbankcdn.com/... site. Any help with locating a previous build 10.1.0.131 so I can install Google Services would be greatly appreciated. Thank you,
xSimplyEpic said:
Hey guys fellow Canadian here, I have the same model as you guys and have managed to downgrade and install GMS on my device.
Here is a great guide on how to downgrade your device using HiSuite and HiSuite Proxy:
I have went ahead and grabbed the links you guys will need to paste into HiSuite Proxy to downgrade your device. I recommend using 10.1.0.121.
FileList/Package URL:
http://update.dbankcdn.com/TDS/data/files/p3/s15/G5633/g1604/v392311/f1/full/filelist.xml
Update Information (Paste this in the small box next to the package URL on HiProxy):
ELS-LGRP4-OVS 10.1.0.121
Full update download link if you want it for some reason:
http://update.dbankcdn.com/TDS/data/files/p3/s15/G5633/g1604/v392311/f1/full/update_full_base.zip
Hope you guys figure it out!
Click to expand...
Click to collapse
Unfortunately it appears that the firmware files are no longer there. "Error - Mostly likely the firmware was removed from the server" from the firmware finder.
I haven't tried the HiSuite Proxy method yet. A little nervous about that as I hear if can brick your phone.
Trying to locate an older matching firmware file still but no luck. Ideally I'd just have this an D-Load it into the phone after downgrading from EMUI 11 to 10 (latest) using HiSuite.
I was too late
tcrec said:
Unfortunately it appears that the firmware files are no longer there. "Error - Mostly likely the firmware was removed from the server" from the firmware finder.
Click to expand...
Click to collapse
I was too late too the party. Damn it
I myself am another user of a Canadian P40 pro and i realized that it's probably the rarest one to have the right firmware on to the updates and have google on it. We must find a way around it so we patch the small community who doesn't have those update or google services at the same time.
Hi everyone.
Hi bought this Tablet Xiaonxin Lenovo J607F and I try to change the Rom with a Global Rom but unlikely in the process of do it, i brick the tablet. I would like to re-install the same ROM. Everyone have the rom for the Lenovo TB-J607F?
Thanks
Top one on this page?
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
in this list there is not the firmware/rom for the J607F. I can only found the J607Z which is different because the tablet is with a SIM card support.
I wish you the best of luck in your search. Locating chinese ROM's is a challenge.
Any version is fine, the important is must be a J607F Rom.
Thanks btw
Try the Chinese Lenovo forums using google translate, or contact your seller for assistance.
Does anybody know if we can use the TB-607Z firmware in the TB-607F? I want to use the global rom so badly.
ok. Good news for the owner of Lenovo J607F.
Yesterday after a long research, translation and adventure in the Chinese world forum and various group, I finally solve few of my problem.
1. I get the Original Rom/Firmware of the TB-J607F (but i still don't know how to attach or upload here because is large 2.5gb so i will attache the link).
TB-J6070F CN Firmware Wifi:
https://hkfront.wxwork.qq.com/downloadobject?fileid=08011204313330332210313638383835323933373533313832342a0131322438333730346531352d373962622d343165632d613739362d31616132626238333161353938948cb2800a421466e7bc63552ed4763f86807256cc700c22ab96dc48015802600768b8177207333030303030309001cc80958b069a0100a001faf003&filename=TB-J607F_CN_WIFI_USER_Q00010.0_R_ZUI_12.6.142_ST_210801_qpst.7z&authkey=7008001004187022701c36ff2d7563ec81a014014e77512b4fd88e27b258ab443799286dcdbdcb17dbd435ee4f94eb2ab60d1500a2b7117563d11592f84c3f62de7eb082c35288e5b17f09f70fd6b078144fd415392853d1c0ecb2781f96ece1e25de20498e443c2ca56797a34563957acfd8edf983bae2aa7&weixinnum=13102673015097907
2. You have to change the Firmware of the tablet with the J607Z Rom because the original ROM is CN Version (do not exist the Global Rom).
3. if you decide to change the Rom then just download from here the Firmware and Procedure with the QFIL: https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/
PS. the J607Z is a SIM tablet and the J607F Wifi Tablet, becareful the Mobile service will not work after you change the Rom because the J607F is not a Sim Tablet. Also there is a risk to brick the tablet.
Hope I helped a lot of people with this problem.
Thanks
franper00 said:
ok. Good news for the owner of Lenovo J607F.
Yesterday after a long research, translation and adventure in the Chinese world forum and various group, I finally solve few of my problem.
1. I get the Original Rom/Firmware of the TB-J607F (but i still don't know how to attach or upload here because is large 2.5gb so i will attache the link).
TB-J6070F CN Firmware Wifi:
https://hkfront.wxwork.qq.com/downloadobject?fileid=08011204313330332210313638383835323933373533313832342a0131322438333730346531352d373962622d343165632d613739362d31616132626238333161353938948cb2800a421466e7bc63552ed4763f86807256cc700c22ab96dc48015802600768b8177207333030303030309001cc80958b069a0100a001faf003&filename=TB-J607F_CN_WIFI_USER_Q00010.0_R_ZUI_12.6.142_ST_210801_qpst.7z&authkey=7008001004187022701c36ff2d7563ec81a014014e77512b4fd88e27b258ab443799286dcdbdcb17dbd435ee4f94eb2ab60d1500a2b7117563d11592f84c3f62de7eb082c35288e5b17f09f70fd6b078144fd415392853d1c0ecb2781f96ece1e25de20498e443c2ca56797a34563957acfd8edf983bae2aa7&weixinnum=13102673015097907
2. You have to change the Firmware of the tablet with the J607Z Rom because the original ROM is CN Version (do not exist the Global Rom).
3. if you decide to change the Rom then just download from here the Firmware and Procedure with the QFIL: https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/
PS. the J607Z is a SIM tablet and the J607F Wifi Tablet, becareful the Mobile service will not work after you change the Rom because the J607F is not a Sim Tablet. Also there is a risk to brick the tablet.
Hope I helped a lot of people with this problem.
Thanks
Click to expand...
Click to collapse
this link is dead bro
franper00 said:
está bien. Buenas noticias para el propietario de Lenovo J607F.
Ayer, después de una larga investigación, traducción y aventura en el foro mundial chino y varios grupos, finalmente resolví algunos de mis problemas.
1. Obtuve la Rom/Firmware original del TB-J607F (pero aún no sé cómo adjuntar o cargar aquí porque tiene un tamaño de 2,5 gb, así que adjuntaré el enlace).
TB-J6070F CN Firmware Wifi:
[URL desplegarse = "true"] https://hkfront.wxwork.qq.com/downl...cfd8edf983bae2aa7&weixinnum=13102673015097907 [/ URL]
2. Tienes que cambiar el Firmware de la tablet con la Rom J607Z porque la ROM original es la Versión CN (no existe la Rom Global).
3. Si decide cambiar la Rom, simplemente descargue desde aquí el Firmware y el Procedimiento con el QFIL: https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/
PD. la J607Z es una tableta SIM y la tableta Wifi J607F, tenga cuidado de que el servicio móvil no funcione después de cambiar la Rom porque la J607F no es una tableta Sim. También existe el riesgo de bloquear la tableta.
Espero haber ayudado a mucha gente con este problema.
Gracias
Click to expand...
Click to collapse
Mí amigo el enlace no funciona...crees podrías ayudarme? Te podría pagar por el servicio..!! De antemano gracias
You can flash 607Z (P11 5G global) rom onto 607F (XiaoXin Pad Plus).
Process of converting it to global firmware, broadly, is
1) Change region from China/undefined to global
https://www.ppomppu.co.kr/zboard/view.php?id=androidtab&page...
There are a couple of XDA threads on doing this region switch too. My 607F was already switched to global when I bought it (from Aliexpress, had a pseudo-global firmware on it)
2) Using Lenovo Rescue Assistant in rescue mode, setting it to P11 5G
you cannot flash the lolinet firmwares with QFIL - the packages don't seem to be correctly configured for QFIL flashing - so you must use Lenovo Assistant to "rescue" the tablet to flash. It will download its own copy of the firmware.
Note: It didn't work for me on windows 10 - I had to use a windows 7 machine to get it working.
suuperboom said:
You can flash 607Z (P11 5G global) rom onto 607F (XiaoXin Pad Plus).
Process of converting it to global firmware, broadly, is
1) Change region from China/undefined to global
https://www.ppomppu.co.kr/zboard/view.php?id=androidtab&page...
There are a couple of XDA threads on doing this region switch too. My 607F was already switched to global when I bought it (from Aliexpress, had a pseudo-global firmware on it)
2) Using Lenovo Rescue Assistant in rescue mode, setting it to P11 5G
you cannot flash the lolinet firmwares with QFIL - the packages don't seem to be correctly configured for QFIL flashing - so you must use Lenovo Assistant to "rescue" the tablet to flash. It will download its own copy of the firmware.
Note: It didn't work for me on windows 10 - I had to use a windows 7 machine to get it working.
Click to expand...
Click to collapse
Did you change the firmware on your xioxin plus to the p11 5g rom? Is it an official firmware? Im asking because i want to improve the speakers performance on my xioxin plus (pseudo global). I understood that on the pseudo global its not possible to enhance the speakers performance? Any ideas would be a huge help
I have no idea about speakers and firmware.
I changed by xiaoxin pad plus from Aliexpress with pseudoglobal to the official P11 5G rom, using LMSA to "rescue" the tablet. I think the setting in LMSA is P11 5G & "61".
My tablet came with the region already set to global when I checked, so I did not have to do that step.
Yes instructions are in Russian, but it is well detailed Google Translate helped me.
franper00 said:
ok. Good news for the owner of Lenovo J607F.
Yesterday after a long research, translation and adventure in the Chinese world forum and various group, I finally solve few of my problem.
1. I get the Original Rom/Firmware of the TB-J607F (but i still don't know how to attach or upload here because is large 2.5gb so i will attache the link).
TB-J6070F CN Firmware Wifi:
https://hkfront.wxwork.qq.com/downloadobject?fileid=08011204313330332210313638383835323933373533313832342a0131322438333730346531352d373962622d343165632d613739362d31616132626238333161353938948cb2800a421466e7bc63552ed4763f86807256cc700c22ab96dc48015802600768b8177207333030303030309001cc80958b069a0100a001faf003&filename=TB-J607F_CN_WIFI_USER_Q00010.0_R_ZUI_12.6.142_ST_210801_qpst.7z&authkey=7008001004187022701c36ff2d7563ec81a014014e77512b4fd88e27b258ab443799286dcdbdcb17dbd435ee4f94eb2ab60d1500a2b7117563d11592f84c3f62de7eb082c35288e5b17f09f70fd6b078144fd415392853d1c0ecb2781f96ece1e25de20498e443c2ca56797a34563957acfd8edf983bae2aa7&weixinnum=13102673015097907
2. You have to change the Firmware of the tablet with the J607Z Rom because the original ROM is CN Version (do not exist the Global Rom).
3. if you decide to change the Rom then just download from here the Firmware and Procedure with the QFIL: https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/
PS. the J607Z is a SIM tablet and the J607F Wifi Tablet, becareful the Mobile service will not work after you change the Rom because the J607F is not a Sim Tablet. Also there is a risk to brick the tablet.
Hope I helped a lot of people with this problem.
Thanks
Click to expand...
Click to collapse
Did you re-install the j607f rom successfully? I’m using the j607z rom. Now i want to re-install the j607f.
Thank you!
franper00 said:
ok. Good news for the owner of Lenovo J607F.
Yesterday after a long research, translation and adventure in the Chinese world forum and various group, I finally solve few of my problem.
1. I get the Original Rom/Firmware of the TB-J607F (but i still don't know how to attach or upload here because is large 2.5gb so i will attache the link).
TB-J6070F CN Firmware Wifi:
https://hkfront.wxwork.qq.com/downloadobject?fileid=08011204313330332210313638383835323933373533313832342a0131322438333730346531352d373962622d343165632d613739362d31616132626238333161353938948cb2800a421466e7bc63552ed4763f86807256cc700c22ab96dc48015802600768b8177207333030303030309001cc80958b069a0100a001faf003&filename=TB-J607F_CN_WIFI_USER_Q00010.0_R_ZUI_12.6.142_ST_210801_qpst.7z&authkey=7008001004187022701c36ff2d7563ec81a014014e77512b4fd88e27b258ab443799286dcdbdcb17dbd435ee4f94eb2ab60d1500a2b7117563d11592f84c3f62de7eb082c35288e5b17f09f70fd6b078144fd415392853d1c0ecb2781f96ece1e25de20498e443c2ca56797a34563957acfd8edf983bae2aa7&weixinnum=13102673015097907
2. You have to change the Firmware of the tablet with the J607Z Rom because the original ROM is CN Version (do not exist the Global Rom).
3. if you decide to change the Rom then just download from here the Firmware and Procedure with the QFIL: https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/
PS. the J607Z is a SIM tablet and the J607F Wifi Tablet, becareful the Mobile service will not work after you change the Rom because the J607F is not a Sim Tablet. Also there is a risk to brick the tablet.
Hope I helped a lot of people with this problem.
Thanks
Click to expand...
Click to collapse
I can't download the CN rom. can some one pls re-upload it
raiso said:
I can't download the CN rom. can some one pls re-upload it
Click to expand...
Click to collapse
Xiaoshin Pad Plus Chinese ROM 12.6.142 Firmware
https://drive.google.com/file/d/11JbIGoC1-sucYjBaQY-omJ7ce1BzRj_W/view?usp=sharing
Xiaoshin Pad Plus Chinese ROM 12.5.040 Firmware
https://drive.google.com/file/d/1EEtPfkt-ilj-Z6-7kdB4qRJg011LAqNe/view?usp=sharing
Do you know how to go back the CN rom?
kiendta said:
Xiaoshin Pad Plus Chinese ROM 12.6.142 Firmware
https://drive.google.com/file/d/11JbIGoC1-sucYjBaQY-omJ7ce1BzRj_W/view?usp=sharing
Xiaoshin Pad Plus Chinese ROM 12.5.040 Firmware
https://drive.google.com/file/d/1EEtPfkt-ilj-Z6-7kdB4qRJg011LAqNe/view?usp=sharing
Do you know how to go back the CN rom?
Click to expand...
Click to collapse
Yes, very simple
I flash base on Win 7. You have to download minimal ADB, QPST, all driver.....
1. unlock your pad plus
-Visit here to get the unlock file (The serial number case-sensitive)
https://www.zui.com/iunlock
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Your wait for about 10min, Lenovo send the unlock file to your email (sn.img)
- Copy sn.img to ADB folder.
- Restart your pad plus to fastboot:
adb reboot bootloader
- Then you type these code:
fastboot flash unlock sn.img
fastboot oem unlock-go
2. Flash rom
- After unlock bootloader, turn off your pad plus.
- press and hold volume + button, then plug cable to pc/laptop (9008 mode)
- go to QPST install folder (maybe C:\Program Files (x86)\Qualcomm\QPST\bin), run QFIL.exe.
- Then Load content (rom folder), choose content.xml
- press download content button, wait for 5 minute and relax
raiso said:
Yes, very simple
I flash base on Win 7. You have to download minimal ADB, QPST, all driver.....
1. unlock your pad plus
-Visit here to get the unlock file (The serial number case-sensitive)
https://www.zui.com/iunlock
View attachment 5586103
- Your wait for about 10min, Lenovo send the unlock file to your email (sn.img)
- Copy sn.img to ADB folder.
- Restart your pad plus to fastboot:
adb reboot bootloader
- Then you type these code:
fastboot flash unlock sn.img
fastboot oem unlock-go
2. Flash rom
- After unlock bootloader, turn off your pad plus.
- press and hold volume + button, then plug cable to pc/laptop (9008 mode)
- go to QPST install folder (maybe C:\Program Files (x86)\Qualcomm\QPST\bin), run QFIL.exe.
- Then Load content (rom folder), choose content.xml
- press download content button, wait for 5 minute and relax
View attachment 5586125
Click to expand...
Click to collapse
I have known what you said. I did go to the ZUI unlock website an fill in all the required information and click on the submit application button to apply for device-specific unlock. But the web said “请输入正确的序列号” (Please enter the correct IMEI1). I’m sure I filled serial number correctly. Until now, i have not got the unlock img. Please help me to get the unlock img, my device serial number is HA1GZ2HA, my email is: [email protected]. Thank you!
I have received an official email later.
Offer some possible suggestions:
1. To activate the tablet account and wait for more than 24 hours (I'm not sure)
2. The sn.img contains the serial number of the machine, so other people's sm.img cannot be used
kiendta said:
Xiaoshin Pad Plus Chinese ROM 12.6.142 Firmware
https://drive.google.com/file/d/11JbIGoC1-sucYjBaQY-omJ7ce1BzRj_W/view?usp=sharing
Xiaoshin Pad Plus Chinese ROM 12.5.040 Firmware
https://drive.google.com/file/d/1EEtPfkt-ilj-Z6-7kdB4qRJg011LAqNe/view?usp=sharing
Do you know how to go back the CN rom?
Click to expand...
Click to collapse
I can't download the CN rom. can some one pls re-upload it