I tried flashing the a125f firmware via Odin but it gave me a pit error, currently on the Canadian firmware
comicc said:
I tried flashing the a125f firmware via Odin but it gave me a pit error, currently on the Canadian firmware
Click to expand...
Click to collapse
You cannot, unless you use BROM Mode, which I do not recommend, since A125W and A125F are really different even though the model just has a change in the letter at the end, and it can brick your device permanantly.
TheWorldYT said:
You cannot, unless you use BROM Mode, which I do not recommend, since A125W and A125F are really different even though the model just has a change in the letter at the end, and it can brick your device permanantly.
Click to expand...
Click to collapse
how would it brick? could I not just reflash og firm?
comicc said:
how would it brick? could I not just reflash og firm?
Click to expand...
Click to collapse
Yeah you cannot, because the A125F is very different, and the A125W, if unlocked version is already equivalent to the A125F, so why would you? I think you can use A125F TWRP, and etc on A125W fine, so no need.
and A125F will give you pretty much the exact same signal and speed capabilities as the A125W, so if that's your reasoning, there's absolutely no need to do it.
TheWorldYT said:
Yeah you cannot, because the A125F is very different, and the A125W, if unlocked version is already equivalent to the A125F, so why would you? I think you can use A125F TWRP, and etc on A125W fine, so no need.
and A125F will give you pretty much the exact same signal and speed capabilities as the A125W, so if that's your reasoning, there's absolutely no need to do it.
Click to expand...
Click to collapse
i wanted to use a custom kernel because the a12 is pretty slow but they all boot loop, and twrp has my storage encrypted and touch doesnt work
comicc said:
i wanted to use a custom kernel because the a12 is pretty slow but they all boot loop, and twrp has my storage encrypted and touch doesnt work
Click to expand...
Click to collapse
You could ask @physwizz
comicc said:
i wanted to use a custom kernel because the a12 is pretty slow but they all boot loop, and twrp has my storage encrypted and touch doesnt work
Click to expand...
Click to collapse
If your storage is encrypted you didn't install twrp correctly.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp tar file into the ap slot
5. reboot to recovery
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
physwizz said:
If your storage is encrypted you didn't install twrp correctly.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp tar file into the ap slot
5. reboot to recovery
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Click to expand...
Click to collapse
my twrp works now but i still cant install any kernels
comicc said:
my twrp works now but i still cant install any kernels
Click to expand...
Click to collapse
What is your baseband?
physwizz said:
What is your baseband?
physwizz said:
What is your baseband?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
just to be sure i can install it just bootloops, my baseband is A125WVLS5BVL2
comicc said:
just to be sure i can install it just bootloops, my baseband is A125WVLS5BVL2
Click to expand...
Click to collapse
There are no kernels available for this baseband.
I will order the source code
physwizz said:
There are no kernels available for this baseband.
I will order the source code
Click to expand...
Click to collapse
did you get the kernel?
comicc said:
did you get the kernel?
Click to expand...
Click to collapse
Source code has just been posted
physwizz said:
Source code has just been posted
Click to expand...
Click to collapse
how do i build it?
comicc said:
how do i build it?
Click to expand...
Click to collapse
You can follow my guides or you can wait for me to have some time.
Physwizz Collection
INDEX: Kernel Building Guides from physwizz About Me https://t.me/physwizz2/2 Building with GCC (beginners start here) https://t.me/physwizz2/182 GITHUB for Beginners https://t.me/physwizz2/10 Building with Clang https://t.me/physwizz2/43 AOSP https://t.me/physwizz2/645 Using Anykernel3...
t.me
physwizz said:
You can follow my guides or you can wait for me to have some time.
Physwizz Collection
INDEX: Kernel Building Guides from physwizz About Me https://t.me/physwizz2/2 Building with GCC (beginners start here) https://t.me/physwizz2/182 GITHUB for Beginners https://t.me/physwizz2/10 Building with Clang https://t.me/physwizz2/43 AOSP https://t.me/physwizz2/645 Using Anykernel3...
t.me
Click to expand...
Click to collapse
okay, please tell me when you have the time because i dont have a device to build it on
comicc said:
okay, please tell me when you have the time because i dont have a device to build it on
Click to expand...
Click to collapse
I just have to try to complete my current task.
I'm doing twrp for a01core
physwizz said:
I just have to try to complete my current task.
I'm doing twrp for a01core
Click to expand...
Click to collapse
what are you gonna do to the kernel? for the a12
Related
https: //youtu. be/8FnNIoP1tSA
So I made this video how I arrived to install TWRP custom recovery and root Galaxy A20!
I don't know if there is any other way maybe easier but I tried with the guides here on xda and I couldn't install it!
Soon I will make a text explanation here
I can't post a link so you will have to delete spaces from the one I put here.
Thanks
Imyou said:
https://youtube/8FnNIoP1tSA
So I made this video how I arrived to install TWRP custom recovery and root Galaxy A20!
I don't know if there is any other way maybe easier but I tried with the guides here on xda and I couldn't install it!
Soon I will make a text explanation here
I can't post a link so you will have to delete spaces from the one I put here.
Thanks
Click to expand...
Click to collapse
Sounds good.
https://www.google.com/url?sa=t&sou...gwAHoECAEQAQ&usg=AOvVaw3G4KzD-yIAtwcsK5B4g4f4
physwizz said:
Sounds good.
Click to expand...
Click to collapse
I extracted the stock firmware AP
replaced the recovery + vbmeta
Rezipped it in .tar
Tried flashing it than it worked
Than I found out that you have to flash magisk and disable vm verity in order for the system not to autoreplace TWRP with stock recovery
And rmm state disabler to not get locked out of the device ..
But after that it works flawlessly .
Just that I don't know what custom rom could be good for this phone!
Imyou said:
I extracted the stock firmware AP
replaced the recovery + vbmeta
Rezipped it in .tar
Tried flashing it than it worked
Than I found out that you have to flash magisk and disable vm verity in order for the system not to autoreplace TWRP with stock recovery
And rmm state disabler to not get locked out of the device ..
But after that it works flawlessly .
Just that I don't know what custom rom could be good for this phone!
Click to expand...
Click to collapse
Which recovery did you use?
physwizz said:
Which recovery did you use?
Click to expand...
Click to collapse
https:// androidfilehost .com/?fid=1899786940962574261
This one by afaneh92
Imyou said:
https:// androidfilehost .com/?fid=1899786940962574261
This one by afaneh92
Click to expand...
Click to collapse
This is the one I am using.
It is for the U2 bootloader only.
This one works for the later bootloaders
https://forum.xda-developers.com/ga...overy-twrp-3-3-1-0-galaxy-a10-exynos-t4013481
physwizz said:
This is the one I am using.
It is for the U2 bootloader only.
This one works for the later bootloaders
https://forum.xda-developers.com/ga...overy-twrp-3-3-1-0-galaxy-a10-exynos-t4013481
Click to expand...
Click to collapse
Yes thank you ! ?
Anyone who can confirm or tried this TWRP for Redmi 10x Pro 5G?
https://www.cyanogenmods.org/downloads/redmi-10x-pro-twrp-recovery/
Yes, I confirm -- it works.
I've install Magisk with it, that's totally ok. Can't confirm yet if its backup/restore functions work or not.
And now I can confirm the backup and restore work. I successfully restored the super and data partitions. And also have flashed stock boot instead of patched.
So, for now it seems the TWRP is nice.
WARNING:NEVER USE THIS RECOVERY WHEN YOUR PHONE IS IN THE LATEST DEVELOPER VERSION SYSTEM.IT WILL CAUSE A LOT OF UNFIXABLE PROBLEMS.
pys078 said:
WARNING:NEVER USE THIS RECOVERY WHEN YOUR PHONE IS IN THE LATEST DEVELOPER VERSION SYSTEM.IT WILL CAUSE A LOT OF UNFIXABLE PROBLEMS.
Click to expand...
Click to collapse
Also,you should not upgrade your system when you have flashed this recovery
Funny thing is that i have done what i said and now my phone is in repairing by changing the motherboard(within one year i dont need to pay for it)
pys078 said:
Also,you should not upgrade your system when you have flashed this recovery
Click to expand...
Click to collapse
TWRP 3.4.1B-0606 is outdated and unavailable for firmware V12.0.5.0 and higher.
Please, keep on V12.0.4.0 or lower.
VD171 said:
TWRP 3.4.1B-0606 is outdated and unavailable for firmware V12.0.5.0 and higher.
Please, keep on V12.0.4.0 or lower.
Click to expand...
Click to collapse
i did not know that and my phone now is repairing QAQ
pys078 said:
i did not know that and my phone now is repairing QAQ
Click to expand...
Click to collapse
You just have to format or erase misc partition, if you've flashed misc.bin.
Or just flash stock rom recovery.img again, my friend.
And everything will works again.
So easy.
Good luck
VD171 said:
TWRP 3.4.1B-0606 is outdated and unavailable for firmware V12.0.5.0 and higher.
Please, keep on V12.0.4.0 or lower.
Click to expand...
Click to collapse
Anyway i should say thank you for telling me that.
VD171 said:
You just have to format or erase misc partition, if you've flashed misc.bin.
Click to expand...
Click to collapse
VD171 said:
You just have to format or erase misc partition, if you've flashed misc.bin.
Or just flash stock rom recovery.img again, my friend.
And everything will works again.
So easy.
Good luck
Click to expand...
Click to collapse
I dont know what was wrong.But my phone could not get in the fastboot mode.
VD171 said:
You just have to format or erase misc partition, if you've flashed misc.bin.
Or just flash stock rom recovery.img again, my friend.
And everything will works again.
So easy.
Good luck
Click to expand...
Click to collapse
And the SP flash tool has not support this phone's chip yet.I feel sad about it.
pys078 said:
I dont know what was wrong.But my phone could not get in the fastboot mode.
Click to expand...
Click to collapse
Because misc.bin. If you've flashed it to misc partition, it will boot on recovery forever.
You have to erase or format it.
That's simple. I will create a guide for it.
VD171 said:
Because misc.bin. If you've flashed it to misc partition, it will boot on recovery forever.
You have to erase or format it.
That's simple. I will create a guide for it.
Click to expand...
Click to collapse
Thank you for helping me !!!!
VD171 said:
Because misc.bin. If you've flashed it to misc partition, it will boot on recovery forever.
You have to erase or format it.
That's simple. I will create a guide for it.
Click to expand...
Click to collapse
i am not an expert in this field.
Usually when i face a problem like this,i use fastboot to settle it.If that dosen't work ,i will use SP flash tool then.
Maybe i should learn more skills about it.
pys078 said:
i am not an expert in this field.
Usually when i face a problem like this,i use fastboot to settle it.If that dosen't work ,i will use SP flash tool then.
Maybe i should learn more skills about it.
Click to expand...
Click to collapse
Done. Try this: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209295/
VD171 said:
Done. Try this: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209295/
Click to expand...
Click to collapse
maybe i was too young.i only know that i can use adb when i am in the miui.i didn't know that when the phone is not in the miui i can use adb.
pys078 said:
maybe i was too young.i only know that i can use adb when i am in the miui.i didn't know that when the phone is not in the miui i can use adb.
Click to expand...
Click to collapse
Adb is default and needed for every android device.
VD171 said:
Done. Try this: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209295/
Click to expand...
Click to collapse
my phone now is back in xiaomi's factory to change the motherboard.sorry for being unable to try your guide article.
VD171 said:
Adb is default and needed for every android device.
Click to expand...
Click to collapse
i don't get it.when i am in miui i have to enable the adb debugging in developer options before i use adb to debug my phone
I got a Motorola G8 Power, and as far as I know, it will not get Android 12, so I was wondering if there is already any Android 12 stable GSI (because I doubt that there are any ROMS, and even less likely for this device).
Also, if I installed it, would I get any OTA updates? What about Google Play Services? Would it be better to just install a ROM like HavocOS (GSI) and wait for them to release the Android 12 update?
Thanks in advance.
Apparently now their is. Check https://ci.android.com/builds/branches/aosp-android12-gsi/grid?
Tell me how it goes!
KevinKraze said:
Apparently now their is. Check https://ci.android.com/builds/branches/aosp-android12-gsi/grid?
Tell me how it goes!
Click to expand...
Click to collapse
Thanks! Will try to flash it and I'll tell you
ByteSeb said:
Thanks! Will try to flash it and I'll tell you
Click to expand...
Click to collapse
Did it work?
kelvinchinedu said:
Did it work?
Click to expand...
Click to collapse
It did not work for me. I just think that this has to do with Android 11, as I tried to install other ROMS and none of them worked. Well, one did, but it was stuck in a bootloop. I am planning on trying again, though.
When u xtract the zip file did u get system img
kelvinchinedu said:
When u xtract the zip file did u get system img
Click to expand...
Click to collapse
Yes. You have to get the version that corresponds to your phone. For example, my Moto G8 Power is an ARM64 device, so I visited this website and downloaded this zip file containing the boot images, the system image and the vbmeta image.
How did u flash it
kelvinchinedu said:
How did u flash it
Click to expand...
Click to collapse
I am trying to flash it via Fastboot, so I rebooted my phone into the bootloader and entered the commands:
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
It has not worked for me, as I get the "Preflash validation failed" error, but it could work for you
I have latest twrp I can use it.
kelvinchinedu said:
I have latest twrp I can use it.
Click to expand...
Click to collapse
Yes, just flash the images one by one instead of flashing the zip
How?
One by one
kelvinchinedu said:
How?
One by one
Click to expand...
Click to collapse
In TWRP, Go to Install, then tap on "Install Image" and select the images
What about the vendor am I going to flash it?
Team Win Recovery Project or TWRP for short. Its a fully touch driven user interface, completely theme-able & you can change just about every aspect of the look and feel.
Now ported to the SM-A315F | SM-A315F/DS | SM-A315G/DS | SM-A315G | SM-A315N. (DS means Dual Sim, thing that doesn't matter a lot for TWRP)
I am not responsible for any bricked imei, when flashing TWRP backup the EFS & NVRAM partitions to be safe, do not root until having an actually good working backup, if you signal goes restore your backup, if you didn't have a previous backup I got a fix for you , flash your firmware as always but on the CP slot in Odin Flash Tool get the CP slot from a CUD4 firmware corresponding your CSC code.
Click to expand...
Click to collapse
Download - You'll always find the latest release in here: https://github.com/Galaxy-MT6768/android_device_samsung_a31x/releasesKnown Issues / Report Issues - https://github.com/Galaxy-MT6768/android_device_samsung_a31x/issuesTelegram support group - http://t.me/a31nsxx
How to install
[Boot Into Download mode by inserting an usb cable while holding both volume buttons]
Flash the latest .tar release from releases.
Hold the recovery combination (Volume Up + Power) while the .tar is flashing via the odin tool.
When booted up into TWRP go Flash and flash this zip, then go to Wipe > Format Data, all your data will be lost.
You can now boot into your system and do whatever you want.
Click to expand...
Click to collapse
Flashing Disabled vbmeta (To boot a modified system)
Spoiler: View
Extract the vbmeta.img.lz4 from the AP slot in your firmware.
Remove it's lz4 compression [for Windows use lz4]:
Code:
sudo apt-get install lz4 -y
lz4 vbmeta.img.lz4
Click to expand...
Click to collapse
Reboot into fastboot from TWRP flash vbmeta using this command line:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Click to expand...
Click to collapse
Sources
TWRP Source - https://github.com/minimal-manifest-twrp/platform_manifest_twrp_aosp/tree/twrp-11
Device Tree - https://github.com/Galaxy-MT6768/android_device_samsung_a31x/tree/android-12
Click to expand...
Click to collapse
Special thanks to:
TeamWin for the Recovery Project.
Physwizz for his a315g kernel.
Zillion for doing the device tree.
Click to expand...
Click to collapse
Actual TWRP status: Bugfixing; Try at your own risk and only if you know what you're doing.
Thanks for doing something for A31 (the forgotten phone). I'll be test as soon as possible. It's a pity there is no rom for flashing through TWRP though.
thanks
Haknor said:
Thanks for doing something for A31 (the forgotten phone). I'll be test as soon as possible. It's a pity there is no rom for flashing through TWRP though.
Click to expand...
Click to collapse
U can use GSI, someone booted A51 GSI successfully on A31. Search Nippon GSI on TG.
GalaxyA51user said:
U can use GSI, someone booted A51 GSI successfully on A31. Search Nippon GSI on TG.
Click to expand...
Click to collapse
Flashing A51 GSI is kinda useless as you got OneUi 4.1 built with love by samsung.
Zillion said:
Flashing A51 GSI is kinda useless as you got OneUi 4.1 built with love by samsung.
Click to expand...
Click to collapse
Okay, there are a lot of AOSP GSI, even MIUI, FuntouchOS, etc which booted successfully. Give then a try if u hate OneUI
GalaxyA51user said:
Okay, there are a lot of AOSP GSI, even MIUI, FuntouchOS, etc which booted successfully. Give then a try if u hate OneUI
Click to expand...
Click to collapse
I still need OneUi to fix Internal Storage decryption xD
I have installed twrp version 3.6.2 many times with different methods and faced bootloop problem . I hope this problem will be solved soon (sm-a315f android11)
rezatavakkol1400 said:
I have installed twrp version 3.6.2 many times with different methods and faced bootloop problem . I hope this problem will be solved soon (sm-a315f android11)
Click to expand...
Click to collapse
Your issue is not flashing a disabled vbmeta + not using the latest Android Version.
For Android 11 you'll have to build twrp from my android-11 branch.
please help me i want a custom rom for my samsung a31
GalaxyA51user said:
U can use GSI, someone booted A51 GSI successfully on A31. Search Nippon GSI on TG.
Click to expand...
Click to collapse
can you please provide the link. i searched but haven't found any custom rom for samsung a31.
Blitzed901 said:
can you please provide the link. i searched but haven't found any custom rom for samsung a31.
Click to expand...
Click to collapse
Just do it, nothing is impossible. Make your dreams come true
For now A31 only got ZROM
Blitzed901 said:
can you please provide the link. i searched but haven't found any custom rom for samsung a31.
Click to expand...
Click to collapse
google Nippon GSI maybe?
Blitzed901 said:
please help me i want a custom rom for my samsung a31
Click to expand...
Click to collapse
There's no rom for A31, just for A30 and A32 just don't ask me why... A31 seems like a forgotten phone
Haknor said:
There's no rom for A31, just for A30 and A32 just don't ask me why... A31 seems like a forgotten phone
Click to expand...
Click to collapse
Never heard of custom roms for A32.
A31 is not forgotten, stop saying that ****.
It just got no developers and ppl who just ask for things 3 developers can't do.
Zillion said:
Never heard of custom roms for A32.
A31 is not forgotten, stop saying that ****.
It just got no developers and ppl who just ask for things 3 developers can't do.
Click to expand...
Click to collapse
There is for A32 -- not much as it should, but it at least has. A31 has no, basically no rom other than the stock. It's a real pity.
I won't stop saying that until one pops up out of nowhere then I shut my mouth while it didn't happen I couldn't... deal with it the same way we do
Send me the xda thread of that roms.
I doubt A32 got more to offer than A31
And roms don't pop out of nowhere, we're trying to develop and that requires time, money and people.
Is it able to decrypt encrypted folder? i got random string (encrypted) after installing twrp.
lyqd said:
Is it able to decrypt encrypted folder? i got random string (encrypted) after installing twrp.
Click to expand...
Click to collapse
Make sure to follow this section:
How to install
[Boot Into Download mode by inserting an usb cable while holding both volume buttons]
Flash the latest .tar release from releases, it may require Magisk patched vbmeta.img
Hold the recovery combination (Volume Up + Power) while the .tar is flashing via the odin tool.
When booted up into TWRP go Flash and flash this zip, then go to Wipe > Format Data, all your data will be lost.
You can now boot into your system and do whatever you want.
Click to expand...
Click to collapse
Zillion said:
Send me the xda thread of that roms.
I doubt A32 got more to offer than A31
And roms don't pop out of nowhere, we're trying to develop and that requires time, money and people.
Click to expand...
Click to collapse
money pls
Hello forum! I need help. After using the TWRP guide, I get a bootloop. Also, I tried installing a GSI (.img) file, but result is a bootloop. I used this GSI.
M1ST0R said:
Hello forum! I need help. After using the TWRP guide, I get a bootloop. Also, I tried installing a GSI (.img) file, but result is a bootloop. I used this GSI.
Click to expand...
Click to collapse
Maybe you need to flash vbmeta.img before first boot. Or try another GSI (verify using Treble Info app to know which variant you need)
What was the stock? Android 12 or 13?
Operating System Tester said:
What was the stock? Android 12 or 13?
Click to expand...
Click to collapse
Android 13. Stock by Samsung. CSC: XME; VER: A536EXXS5CWDA.
_allaie_ said:
flash vbmeta.img before first boot
Click to expand...
Click to collapse
i make it. that says in the TWRP guide.
verify using Treble Info app to know which variant you need
Click to expand...
Click to collapse
K, i try this app
but whats about bootloop after kernel flashing? and magisk too
I've checked, and I can say that the bootloop occurs after flashing TWRP_3.6.2 and disabling_vbmeta_R.
M1ST0R said:
I've checked, and I can say that the bootloop occurs after flashing TWRP_3.6.2 and disabling_vbmeta_R.
Click to expand...
Click to collapse
You need to flash the patched kernel;
1. Run multidisabler in TWRP terminal
2. Factory reset via TWRP
3. Reboot to recovery
4. ADB Push the kernel or use the sd card and flash it.
5. Boom, you can boot now.