Twrp + root for Galaxy A20 simple tutorial for beginners! - Samsung Galaxy A20 Guides, News, & Discussion

https: //youtu. be/8FnNIoP1tSA
So I made this video how I arrived to install TWRP custom recovery and root Galaxy A20!
I don't know if there is any other way maybe easier but I tried with the guides here on xda and I couldn't install it!
Soon I will make a text explanation here
I can't post a link so you will have to delete spaces from the one I put here.
Thanks

Imyou said:
https://youtube/8FnNIoP1tSA
So I made this video how I arrived to install TWRP custom recovery and root Galaxy A20!
I don't know if there is any other way maybe easier but I tried with the guides here on xda and I couldn't install it!
Soon I will make a text explanation here
I can't post a link so you will have to delete spaces from the one I put here.
Thanks
Click to expand...
Click to collapse
Sounds good.
https://www.google.com/url?sa=t&sou...gwAHoECAEQAQ&usg=AOvVaw3G4KzD-yIAtwcsK5B4g4f4

physwizz said:
Sounds good.
Click to expand...
Click to collapse
I extracted the stock firmware AP
replaced the recovery + vbmeta
Rezipped it in .tar
Tried flashing it than it worked
Than I found out that you have to flash magisk and disable vm verity in order for the system not to autoreplace TWRP with stock recovery
And rmm state disabler to not get locked out of the device ..
But after that it works flawlessly .
Just that I don't know what custom rom could be good for this phone!

Imyou said:
I extracted the stock firmware AP
replaced the recovery + vbmeta
Rezipped it in .tar
Tried flashing it than it worked
Than I found out that you have to flash magisk and disable vm verity in order for the system not to autoreplace TWRP with stock recovery
And rmm state disabler to not get locked out of the device ..
But after that it works flawlessly .
Just that I don't know what custom rom could be good for this phone!
Click to expand...
Click to collapse
Which recovery did you use?

physwizz said:
Which recovery did you use?
Click to expand...
Click to collapse
https:// androidfilehost .com/?fid=1899786940962574261
This one by afaneh92

Imyou said:
https:// androidfilehost .com/?fid=1899786940962574261
This one by afaneh92
Click to expand...
Click to collapse
This is the one I am using.
It is for the U2 bootloader only.
This one works for the later bootloaders
https://forum.xda-developers.com/ga...overy-twrp-3-3-1-0-galaxy-a10-exynos-t4013481

physwizz said:
This is the one I am using.
It is for the U2 bootloader only.
This one works for the later bootloaders
https://forum.xda-developers.com/ga...overy-twrp-3-3-1-0-galaxy-a10-exynos-t4013481
Click to expand...
Click to collapse
Yes thank you ! ?

Related

[Simple Guide] Rooting Oppo F1 Plus X9009

Hello, this is simple guide to root Oppo F1 Plus. No need to unlock bootloader :fingers-crossed:
This method worked and tested :highfive:
Yes i know there's another guide in this forum but it only link to youtube video tutorial.
First, download this update.zip and then copy it to your device (internal or MicroSD is allright, up to you)
*You can download file update.zip via attachment below
1. Go to recovery mode. Turn off your F1 Plus, wait for a second and then turn it on again with Power + Volume Down
2. Select language (english of course ahh is up to you)
3. Choose Install from storage and select update.zip
4. Wait the process (below 1 minute) and when it done just reboot system
5. Finishing updating and then check in your app drawer SuperSu should appear
6. Update SuperSU binary if needed
7. Done
will this work with the F1f version of the phone?
chooky536 said:
will this work with the F1f version of the phone?
Click to expand...
Click to collapse
There are instructions in a guide in this very section of this forum.
Works like a charm. Having recently purchased the phone I didn't want to root it. But after I realized that Oppo released the May firmware (around 1.3 GB) on their website. Everything works as it should. I'm hoping for an official forum with more stuff.
A question, what theme are you using with the default launcher?
Ron1209 said:
Works like a charm. Having recently purchased the phone I didn't want to root it. But after I realized that Oppo released the May firmware (around 1.3 GB) on their website. Everything works as it should. I'm hoping for an official forum with more stuff.
A question, what theme are you using with the default launcher?
Click to expand...
Click to collapse
Lucid launcher with darkonis icon theme
Can you confirm if Xposed is working with stock recovery? If working please specify the version
Ron1209 said:
Can you confirm if Xposed is working with stock recovery? If working please specify the version
Click to expand...
Click to collapse
I tried flashing Xposed with stock recovery.
Install failed.
Is it still working?
Danusyakti said:
Lucid launcher with darkonis icon theme
Click to expand...
Click to collapse
Have u tried flashfire to flash xposed?
kazuya_gonzalez said:
Have u tried flashfire to flash xposed?
Click to expand...
Click to collapse
What is FlashFire? I'm new to this, I had a Samsung S3 earlier so CWM was the king. Also, I get notifications for software updates but it just won't download. Even after unrooting and factory reset.
Ron1209 said:
What is FlashFire? I'm new to this, I had a Samsung S3 earlier so CWM was the king. Also, I get notifications for software updates but it just won't download. Even after unrooting and factory reset.
Click to expand...
Click to collapse
Flashfire is a tool that can flash zip / backup ur phone without unlocking bootloader or install custom recovery.. So u can install xposed.zip.. But there is no one try it for x9009 oppo f1 plus.. Make sure u check ur hardware info first so u download the right thing for ur phone if arm64 u must download for arm64.. Do it on ur own risk..
Just tried, its not working with Flashfire
theobeaudenon said:
Just tried, its not working with Flashfire
Click to expand...
Click to collapse
Rooted stockrom , arm64 xposed and flashfire? Makes ur device brick?
kazuya_gonzalez said:
Rooted stockrom , arm64 xposed and flashfire? Makes ur device brick?
Click to expand...
Click to collapse
No brick, no bugs but xposed app do not detect it
There was a link for TWRP in the YouTube video. Anyone tried? If you want to try it's in Chinese but TWRP has a translate option.
I am now able to get OTA after 5th factory reset.
Ron1209 said:
There was a link for TWRP in the YouTube video. Anyone tried? If you want to try it's in Chinese but TWRP has a translate option.
I am now able to get OTA after 5th factory reset.
Click to expand...
Click to collapse
Any link and tutorial ?
Link for TWRP - pan.baidu.com/s/1qXNnLdq#path=%252Fandroid%252F%25E7%25AC%25AC%25E4%25B8%2589%25E6%2596%25B9ROM%252FOPPO%2520R9m%252Ftwrp%2520recovery
Ron1209 said:
Link for TWRP - pan.baidu.com/s/1qXNnLdq#path=%252Fandroid%252F%25E7%25AC%25AC%25E4%25B8%2589%25E6%2596%25B9ROM%252FOPPO%2520R9m%252Ftwrp%2520recovery
Click to expand...
Click to collapse
Just made it !!
I used this link : https://ce398c.lt.yunpan.cn/lk/cPi8mZgDBbGRk
and xposed-v86-sdk22-arm64.zip
theobeaudenon said:
Just made it !!
I used this link : https://ce398c.lt.yunpan.cn/lk/cPi8mZgDBbGRk
and xposed-v86-sdk22-arm64.zip
Click to expand...
Click to collapse
Hmm thanks for confirming it is work
theobeaudenon said:
Just made it !!
I used this link : https://ce398c.lt.yunpan.cn/lk/cPi8mZgDBbGRk
and xposed-v86-sdk22-arm64.zip
Click to expand...
Click to collapse
Please share the whole method. Thank you.
Another thing, the link I sent has an unofficial cm12.1 link for our device. Can someone please check that as well?

Help to flash ULEFONE S8 PRO GOLD

Hello, I need help to recover my S8 PRO, it does not start,:crying::crying: and I have try flashed with flash tool and with "smartphone multi port download tool" and it gives me these errors, if someone can help me. Thank you
mfonemaello said:
Hello, I need help to recover my S8 PRO, it does not start,:crying::crying: and I have try flashed with flash tool and with "smartphone multi port download tool" and it gives me these errors, if someone can help me. Thank you
Click to expand...
Click to collapse
Can you specify what errors you're receiving, maybe I can help you, I have a S8 Pro too
thxs Klima i fixed
Klima1123 said:
Can you specify what errors you're receiving, maybe I can help you, I have a S8 Pro too
Click to expand...
Click to collapse
thanks I could fix it:good: Do you know that the latest firmware has 1 Trojan on the sound recorder?
mfonemaello said:
thanks I could fix it:good: Do you know that the latest firmware has 1 Trojan on the sound recorder?
Click to expand...
Click to collapse
I've heard about it, but I didn't noticed nothing strange coming from the app, I'll scan it with avast, if he finds something, I'll deleted him, my phone does have root
---------- Post added at 01:50 PM ---------- Previous post was at 01:41 PM ----------
Hey guy, I'm trying to port lineage os 14 & 15 to the S8 Pro, do you have experience with twrp, flash etc.? You could help with being my beta tester, next I'll put some betas on android file host, and make a forum here on XDA for the phone
Does anyone have a link to the twrp img file, or any other custom recovery, i cant find it anywhere, all the links just point to the flash tool but it doesn't contain the twrp img file?
4ndyroid said:
Does anyone have a link to the twrp img file, or any other custom recovery, i cant find it anywhere, all the links just point to the flash tool but it doesn't contain the twrp img file?
Click to expand...
Click to collapse
I have found it on 4pda.
Just google ulefone s8 pro 4pda.
You need to let translate by google, because of different language.
4ndyroid said:
Does anyone have a link to the twrp img file, or any other custom recovery, i cant find it anywhere, all the links just point to the flash tool but it doesn't contain the twrp img file?
Click to expand...
Click to collapse
Here: https://androidfilehost.com/?fid=962021903579483650
Use this to install twrp and magisk root
Hi, thanks you for your help, was able to flash twrp using the tool you directed me to, however now im stuck at the splash screen (ulefone s8 image) and phone wont boot (am able to flash stock rom to revocer phone, so not a complete brick, just cant get it to boot after flashing twrp), any ideads?
Klima1123 said:
Here: https://androidfilehost.com/?fid=962021903579483650
Use this to install twrp and magisk root
Click to expand...
Click to collapse
Doesn't work with the firmware V3.01 and V3.03. Getting in the recovery works fine, but booting the system is impossible. The boot stay stuck at the "S8 Pro With android (something)" splash screen.
4ndyroid said:
Hi, thanks you for your help, was able to flash twrp using the tool you directed me to, however now im stuck at the splash screen (ulefone s8 image) and phone wont boot (am able to flash stock rom to revocer phone, so not a complete brick, just cant get it to boot after flashing twrp), any ideads?
Click to expand...
Click to collapse
Something like this has happened to me too. Boot your phone on twrp then select the option 'Wipe', then "Format data", my phone only booted up after I did this
---------- Post added at 04:41 PM ---------- Previous post was at 04:36 PM ----------
mfonemaello said:
thanks I could fix it:good: Do you know that the latest firmware has 1 Trojan on the sound recorder?
Click to expand...
Click to collapse
In the sound recorder I didnt find nothing, but the app GYBeautySnap aka BeautyMakeup open some annoyng processes (that consumes about 40mb of ram) that has something like ads, I think he is the real virus
Tried wiping then 'format system', still didn't work, stays stuck at the boot logo, bit thanks for the help anyway.
It rebootq only to a green TWRP!
Touf344 said:
Doesn't work with the firmware V3.01 and V3.03. Getting in the recovery works fine, but booting the system is impossible. The boot stay stuck at the "S8 Pro With android (something)" splash screen.
Click to expand...
Click to collapse
My phone use V3.01 firmware and it's worked
Klima1123 said:
My phone use V3.01 firmware and it's worked
Click to expand...
Click to collapse
What was the process you used?
4ndyroid said:
What was the process you used?
Click to expand...
Click to collapse
I've retried the whole process: flashed the stock rom, booted the phone on fastboot, used this (https://androidfilehost.com/?fid=962021903579483650) to install twrp, and then i tried booting the phone..... :silly: it's don't started , so i used that noverity.zip that comes with the tool, after this my phone booted, the tutorial that i used demands the installantion of this zip View attachment noverity.zip
Klima1123 said:
I've retried the whole process: flashed the stock rom, booted the phone on fastboot, used this (https://androidfilehost.com/?fid=962021903579483650) to install twrp, and then i tried booting the phone..... :silly: it's don't started , so i used that noverity.zip that comes with the tool, after this my phone booted, the tutorial that i used demands the installantion of this zip View attachment 4460246
Click to expand...
Click to collapse
Hi, thanks for your help, seems I missed the noverity.zip part. What is the noverity.zip and how did you install it? (flashed via TWRP, ADB or using the tool?) Could you link the tutorial you used?
4ndyroid said:
Hi, thanks for your help, seems I missed the noverity.zip part. What is the noverity.zip and how did you install it? (flashed via TWRP, ADB or using the tool?) Could you link the tutorial you used?
Click to expand...
Click to collapse
That noverity.zip disables a mechanism in the boot partition that verify the boot itself and the system partition, when you install twrp a little bit of the boot partition is altered and so the boot is blocked.
Install the zip using twrp. You can take a look at this (https://www.getdroidtips.com/twrp-recovery-ulefone-s8-pro/), but if I remember well, that s8 pro toolkit app is the one that asks you to install the zip
Klima1123 said:
That noverity.zip disables a mechanism in the boot partition that verify the boot itself and the system partition, when you install twrp a little bit of the boot partition is altered and so the boot is blocked.
Install the zip using twrp. You can take a look at this (https://www.getdroidtips.com/twrp-recovery-ulefone-s8-pro/), but if I remember well, that s8 pro toolkit app is the one that asks you to install the zip
Click to expand...
Click to collapse
Hi, thanks for the help, still didn't work even after flashing the noverity.zip but cheers anyway
4ndyroid said:
Hi, thanks for the help, still didn't work even after flashing the noverity.zip but cheers anyway
Click to expand...
Click to collapse
which firmware version are installed on your phone? Have you tried flashing the official ROM from the ulefone site, then retried the process?
Have tried on both v3. 01 & v3. 03 firmwares. Stock firmware wasn't downloaded directly from ulefone site, imagine it will be the same but will give it a go.

ROOTED STOCK KERNEL (Magisk 18.1) - 53.0.A.6.92

DO NOT UPGRADE MAGISK TO 19.x OR YOUR PHONE WILL BOOTLOOP!
All you need is an unlocked bootloader.
Install:
1. Download the file for your device
2. Flash via fastboot
Code:
fastboot flash boot boot.img
3. Reboot
4. Install Magisk Manager
Download for Firmware 53.0.A.6.92:
I3113: Download
I4113: Download
If you like my work, press thanks
I would appreciate your Donation
​
thanks a lot!
My device is I4193, I flashed the your rooted image of I4113(as they have the same boot image).
my device can boot normally, but in magisk manager , the device still shown as unroot.
wang4632 said:
thanks a lot!
My device is I4193, I flashed the your rooted image of I4113(as they have the same boot image).
my device can boot normally, but in magisk manager , the device still shown as unroot.
Click to expand...
Click to collapse
You need to download the boot-magisk.img and not the boot-stock.img
Schritti said:
You need to download the boot-magisk.img and not the boot-stock.img
Click to expand...
Click to collapse
yes, I download the boot-magisk.img. of wihch the file size is a bit larger then stock one.
wang4632 said:
yes, I download the boot-magisk.img. of wihch the file size is a bit larger then stock one.
Click to expand...
Click to collapse
Could you try the I3113 one? Should also boot.
Schritti said:
Could you try the I3113 one? Should also boot.
Click to expand...
Click to collapse
I tried this one. it can boot normally, but magisk manager still shows unroot..
can you please help patching the stock boot image of I4193?
i uploaded the stock boot image, here is the download link:
https://drive.google.com/file/d/1aN-kTQN8g_HodjSqcPr42e-cyvMriDd0/view?usp=sharing
wang4632 said:
I tried this one. it can boot normally, but magisk manager still shows unroot..
can you please help patching the stock boot image of I4193?
i uploaded the stock boot image, here is the download link:
https://drive.google.com/file/d/1aN-kTQN8g_HodjSqcPr42e-cyvMriDd0/view?usp=sharing
Click to expand...
Click to collapse
Here you go
https://mega.nz/#F!DyQDHI5S!BN44I8xHfk8yf-9AFj5axg
Please report if it works, so i can add it to OP
Schritti said:
Here you go
https://mega.nz/#F!DyQDHI5S!BN44I8xHfk8yf-9AFj5axg
Please report if it works, so i can add it to OP
Click to expand...
Click to collapse
it didn't work. same as before, it boot normally, but shows unroot in magisk manager.
Form XperiaFirm, I saw I4193 is only for HongKong and Taiwan, I'm not sure if it has some difference form other models, maybe I can post the patched boot image in some Chinese forums, I hope some more users can help test it .
Schritti said:
DO NOT UPGRADE MAGISK TO 19.x OR YOUR PHONE WILL BOOTLOOP!
All you need is an unlocked bootloader.
Install:
1. Download the file for your device
2. Flash via fastboot
Code:
fastboot flash boot boot.img
3. Reboot
4. Install Magisk Manager
Download for Firmware 53.0.A.6.92:
I3113: Download
I4113: Download
If you like my work, press thanks
I would appreciate your Donation
​
Click to expand...
Click to collapse
I wiped my device by using newflasher to flash the stock 53.0.A.6.92 firmware and then flashed boot-magisk-I4113, and now it works. I can see root status in magisk manager.
I don't know what is the reason, but anyweay it works now. thnak you!
wang4632 said:
DO NOT UPGRADE MAGISK TO 19.x OR YOUR PHONE WILL BOOTLOOP!
All you need is an unlocked bootloader.
Install:
1. Download the file for your device
2. Flash via fastboot
I wiped my device by using newflasher to flash the stock 53.0.A.6.92 firmware and then flashed boot-magisk-I4113, and now it works. I can see root status in magisk manager.
I don't know what is the reason, but anyweay it works now. thnak you!
Click to expand...
Click to collapse
Great!
Could be because you maybe had your phone rooted with 19.0 on the previous firmware
But i cant install modules from magisk. MMMM, can install, after restart not appear modules in modules part
@Schritti Can you make this for .8.71 firmware if possible please? Many thanks in advance
Chronic2k13 said:
@Schritti Can you make this for .8.71 firmware if possible please? Many thanks in advance
Click to expand...
Click to collapse
You can use my TWRP to flash Magisk 18.1
https://forum.xda-developers.com/xperia-10/development/recovery-twrp-3-3-1-0-unofficial-t3941158
Schritti said:
You can use my TWRP to flash Magisk 18.1
https://forum.xda-developers.com/xperia-10/development/recovery-twrp-3-3-1-0-unofficial-t3941158
Click to expand...
Click to collapse
I don't think it is possible to install magisk without sd card decrypt working.
ToastedToast said:
I don't think it is possible to install magisk without sd card decrypt working.
Click to expand...
Click to collapse
External SD should be fine
I flashed magisk-boot.img and all worked.
Now i wanted to unroot and stupid me, not thinking about what i am doing, i unrooted through magisk manager.
So i'm stuck in a boot loop.
Flashing the stock-boot.img in fastboot mode now got me to fastboot not recognizing my phone anymore.
When i check "fastboot devices" it returns "???????????? fastboot".
Flash mode still allows me to flash another boot.img with "fastboot flash boot stock-boot.img" but that doesn't fix the bootloop.
Any ideas?
Newflasher with xperifirm firmware files. Then factory reset from booted phone to re-gain safetynet
ToastedToast said:
Newflasher with xperifirm firmware files. Then factory reset from booted phone to re-gain safetynet
Click to expand...
Click to collapse
Wow! That worked! Thank you so much!!!
VelocityHD said:
Wow! That worked! Thank you so much!!!
Click to expand...
Click to collapse
blade85 said:
Since I'm in a similar situation can you please send me the links where I can download the original firmware images?
Thanks in advance
Click to expand...
Click to collapse
Forget it I found everything, which Market and Operator did you take? I see there's no Austrian package?
Does anyone also have a european 53.0.A.6.92 firmware? Would need it to be able to root it

The lastest firmware ESG5 leads to boot loop when TWRP existing

Hi all
I just updated to ESG5 version of OREO. The nightmare comes... I cannot boot again now !!
Until I flash back the original version of OREO, that is , with ESG5 bootloader one, it can boot.
However, I cannot use TWRP and root anymore !
Anyone has idea? thanks a lot
AP_G930FXXS5ESG5_CL14843133_QB24881129_REV00_user_low_ship_meta.tar
BL_G930FXXS5ESG5_CL14843133_QB24881129_REV00_user_low_ship.tar
CP_G930FXXS5ESG5_CP13334970_CL14843133_QB24881129_REV00_user_low_ship.tar
CSC_OZS_G930FOZS5ESG5_CL14843133_QB24881129_REV00_user_low_ship.tar
sonic997 said:
Hi all
I just updated to ESG5 version of OREO. The nightmare comes... I cannot boot again now !!
Until I flash back the original version of OREO, that is , with ESG5 bootloader one, it can boot.
However, I cannot use TWRP and root anymore !
Anyone has idea? thanks a lot
AP_G930FXXS5ESG5_CL14843133_QB24881129_REV00_user_low_ship_meta.tar
BL_G930FXXS5ESG5_CL14843133_QB24881129_REV00_user_low_ship.tar
CP_G930FXXS5ESG5_CP13334970_CL14843133_QB24881129_REV00_user_low_ship.tar
CSC_OZS_G930FOZS5ESG5_CL14843133_QB24881129_REV00_user_low_ship.tar
Click to expand...
Click to collapse
what version of TWRP are you using? Theyre not all cross compatible
youdoofus said:
what version of TWRP are you using? Theyre not all cross compatible
Click to expand...
Click to collapse
twrp-3.3.1-0-herolte
I have already flashed the following but cannot boot !
no-verity-opt-encrypt-6.0.zip
sonic997 said:
twrp-3.3.1-0-herolte
I have already flashed the following but cannot boot !
no-verity-opt-encrypt-6.0.zip
Click to expand...
Click to collapse
wait, what? what is that file and why are you flashing it? Also, its a zip file, im at work atm and its 756 am and and ive only had 2 sips of my first monster, but as i recall, you only flash tar.md5 files in Odin
youdoofus said:
wait, what? what is that file and why are you flashing it? Also, its a zip file, im at work atm and its 756 am and and ive only had 2 sips of my first monster, but as i recall, you only flash tar.md5 files in Odin
Click to expand...
Click to collapse
I flash TWRP in Odin and flash no-verity-opt-encrypt-6.0.zip in TWRP.
It has a normal boot for previous version of bootloader.
sonic997 said:
I flash TWRP in Odin and flash no-verity-opt-encrypt-6.0.zip in TWRP.
It has a normal boot for previous version of bootloader.
Click to expand...
Click to collapse
ok, that other post made it seem like you were trying to flash that in Odin LoL anyways so, when you do all that and then reboot, it just goes black or does it bootloop?
youdoofus said:
ok, that other post made it seem like you were trying to flash that in Odin LoL anyways so, when you do all that and then reboot, it just goes black or does it bootloop?
Click to expand...
Click to collapse
yes, it just bootloop
Don't use no-verity-opt-encrypt-6.0.zip (you probably don't need it) .
Start all over. Flash the stock ROM with Odin, then flash TWRP, and then flash Magisk (via TWRP).

[RECOVERY] TWRP for Samsung Galaxy A31 [SM-A315G/F/N] [UNOFFICIAL] [BINARY 1 & 2]

Team Win Recovery Project or TWRP for short. Its a fully touch driven user interface, completely theme-able & you can change just about every aspect of the look and feel.
Now ported to the SM-A315F | SM-A315F/DS | SM-A315G/DS | SM-A315G | SM-A315N. (DS means Dual Sim, thing that doesn't matter a lot for TWRP)​
I am not responsible for any bricked imei, when flashing TWRP backup the EFS & NVRAM partitions to be safe, do not root until having an actually good working backup, if you signal goes restore your backup, if you didn't have a previous backup I got a fix for you , flash your firmware as always but on the CP slot in Odin Flash Tool get the CP slot from a CUD4 firmware corresponding your CSC code.
Click to expand...
Click to collapse
Download - You'll always find the latest release in here: https://github.com/Galaxy-MT6768/android_device_samsung_a31x/releases​Known Issues / Report Issues - https://github.com/Galaxy-MT6768/android_device_samsung_a31x/issues​Telegram support group - http://t.me/a31nsxx​​
How to install​
[Boot Into Download mode by inserting an usb cable while holding both volume buttons]
Flash the latest .tar release from releases.
Hold the recovery combination (Volume Up + Power) while the .tar is flashing via the odin tool.
When booted up into TWRP go Flash and flash this zip, then go to Wipe > Format Data, all your data will be lost.
You can now boot into your system and do whatever you want.
Click to expand...
Click to collapse
​Flashing Disabled vbmeta (To boot a modified system)​
Spoiler: View
Extract the vbmeta.img.lz4 from the AP slot in your firmware.
Remove it's lz4 compression [for Windows use lz4]:
Code:
sudo apt-get install lz4 -y
lz4 vbmeta.img.lz4
Click to expand...
Click to collapse
Reboot into fastboot from TWRP flash vbmeta using this command line:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Click to expand...
Click to collapse
Sources​
TWRP Source - https://github.com/minimal-manifest-twrp/platform_manifest_twrp_aosp/tree/twrp-11
Device Tree - https://github.com/Galaxy-MT6768/android_device_samsung_a31x/tree/android-12
Click to expand...
Click to collapse
Special thanks to:​
TeamWin for the Recovery Project.
Physwizz for his a315g kernel.
Zillion for doing the device tree.
Click to expand...
Click to collapse
Actual TWRP status: Bugfixing; Try at your own risk and only if you know what you're doing.
Thanks for doing something for A31 (the forgotten phone). I'll be test as soon as possible. It's a pity there is no rom for flashing through TWRP though.
thanks
Haknor said:
Thanks for doing something for A31 (the forgotten phone). I'll be test as soon as possible. It's a pity there is no rom for flashing through TWRP though.
Click to expand...
Click to collapse
U can use GSI, someone booted A51 GSI successfully on A31. Search Nippon GSI on TG.
GalaxyA51user said:
U can use GSI, someone booted A51 GSI successfully on A31. Search Nippon GSI on TG.
Click to expand...
Click to collapse
Flashing A51 GSI is kinda useless as you got OneUi 4.1 built with love by samsung.
Zillion said:
Flashing A51 GSI is kinda useless as you got OneUi 4.1 built with love by samsung.
Click to expand...
Click to collapse
Okay, there are a lot of AOSP GSI, even MIUI, FuntouchOS, etc which booted successfully. Give then a try if u hate OneUI
GalaxyA51user said:
Okay, there are a lot of AOSP GSI, even MIUI, FuntouchOS, etc which booted successfully. Give then a try if u hate OneUI
Click to expand...
Click to collapse
I still need OneUi to fix Internal Storage decryption xD
I have installed twrp version 3.6.2 many times with different methods and faced bootloop problem . I hope this problem will be solved soon (sm-a315f android11)
rezatavakkol1400 said:
I have installed twrp version 3.6.2 many times with different methods and faced bootloop problem . I hope this problem will be solved soon (sm-a315f android11)
Click to expand...
Click to collapse
Your issue is not flashing a disabled vbmeta + not using the latest Android Version.
For Android 11 you'll have to build twrp from my android-11 branch.
please help me i want a custom rom for my samsung a31
GalaxyA51user said:
U can use GSI, someone booted A51 GSI successfully on A31. Search Nippon GSI on TG.
Click to expand...
Click to collapse
can you please provide the link. i searched but haven't found any custom rom for samsung a31.
Blitzed901 said:
can you please provide the link. i searched but haven't found any custom rom for samsung a31.
Click to expand...
Click to collapse
Just do it, nothing is impossible. Make your dreams come true
For now A31 only got ZROM
Blitzed901 said:
can you please provide the link. i searched but haven't found any custom rom for samsung a31.
Click to expand...
Click to collapse
google Nippon GSI maybe?
Blitzed901 said:
please help me i want a custom rom for my samsung a31
Click to expand...
Click to collapse
There's no rom for A31, just for A30 and A32 just don't ask me why... A31 seems like a forgotten phone
Haknor said:
There's no rom for A31, just for A30 and A32 just don't ask me why... A31 seems like a forgotten phone
Click to expand...
Click to collapse
Never heard of custom roms for A32.
A31 is not forgotten, stop saying that ****.
It just got no developers and ppl who just ask for things 3 developers can't do.
Zillion said:
Never heard of custom roms for A32.
A31 is not forgotten, stop saying that ****.
It just got no developers and ppl who just ask for things 3 developers can't do.
Click to expand...
Click to collapse
There is for A32 -- not much as it should, but it at least has. A31 has no, basically no rom other than the stock. It's a real pity.
I won't stop saying that until one pops up out of nowhere then I shut my mouth while it didn't happen I couldn't... deal with it the same way we do
Send me the xda thread of that roms.
I doubt A32 got more to offer than A31
And roms don't pop out of nowhere, we're trying to develop and that requires time, money and people.
Is it able to decrypt encrypted folder? i got random string (encrypted) after installing twrp.
lyqd said:
Is it able to decrypt encrypted folder? i got random string (encrypted) after installing twrp.
Click to expand...
Click to collapse
Make sure to follow this section:
How to install​
[Boot Into Download mode by inserting an usb cable while holding both volume buttons]
Flash the latest .tar release from releases, it may require Magisk patched vbmeta.img
Hold the recovery combination (Volume Up + Power) while the .tar is flashing via the odin tool.
When booted up into TWRP go Flash and flash this zip, then go to Wipe > Format Data, all your data will be lost.
You can now boot into your system and do whatever you want.
Click to expand...
Click to collapse
Zillion said:
Send me the xda thread of that roms.
I doubt A32 got more to offer than A31
And roms don't pop out of nowhere, we're trying to develop and that requires time, money and people.
Click to expand...
Click to collapse
money pls

Categories

Resources