Related
Hi All,
I have a fairly old Nexus S (Android 4.1.2). For some reason or other it switches itself off if not used for a few hours. I then have to go through a re-boot and PIN No. routine to use it again. While it is off I frequently miss calls.
I can't find anything in "Settings" which will enable me to adjust the period which it remains active.
Has anyone else experienced this?
Any help greatly appreciated
Regards
Art
artpayne said:
Hi All,
I have a fairly old Nexus S (Android 4.1.2). For some reason or other it switches itself off if not used for a few hours. I then have to go through a re-boot and PIN No. routine to use it again. While it is off I frequently miss calls.
I can't find anything in "Settings" which will enable me to adjust the period which it remains active.
Has anyone else experienced this?
Any help greatly appreciated
Regards
Art
Click to expand...
Click to collapse
Hi There,
Well i am sorry to say that either you didnt explain your problem correctly or i didnt get it properly well all i can say that there is some kind of a Bug in your device which switches it off by it self.
You can try This:
*Factory Reset your device.
OR
*Reinstall the Rom.
Hope someone may be able to help. Recently on my S6E, whenever I make or answer a phone call the speaker phone is always turned on. Any idea how to remedy this? Its quite annoying.
Thanks
BassTeQ said:
Hope someone may be able to help. Recently on my S6E, whenever I make or answer a phone call the speaker phone is always turned on. Any idea how to remedy this? Its quite annoying.
Thanks
Click to expand...
Click to collapse
Dear @BassTeQ
See if this helps go to [S voice settings] and uncheck auto-start speaker
Regards
bluff master said:
Dear @BassTeQ
See if this helps go to [S voice settings] and uncheck auto-start speaker
Regards
Click to expand...
Click to collapse
Hi @bluff master,
Thanks for your reply, I have tried that, the option was already disabled.
BassTeQ said:
Hi @bluff master,
Thanks for your reply, I have tried that, the option was already disabled.
Click to expand...
Click to collapse
Anyone ??
BassTeQ said:
Anyone ??
Click to expand...
Click to collapse
I had the same horrible issue, i tried some fixes online but it didn't work, i had to restore.
hosmsdos said:
I had the same horrible issue, i tried some fixes online but it didn't work, i had to restore.
Click to expand...
Click to collapse
Ohh dear, not the answer I wanted to hear. Glad to see I'm not the only one with the issue. So you did a factory reset to resolve it?
Same here. After so many bugs I am about to sell that damn thing. It really is a shame! Common, but those are core basic things that should never NEVER ever have issues like this!
I have the same issue since a day... I tested many workaround ut nothing works and I will not do a factory reset for that!
Hope we will find a solution.
I read a lot of posts speaking about a USB connector issue.
The connector needs to be cleaned or changed.
Any one have more info ?
For those who are interested, I really think it is a software bug because when I connect my phone into my car in bluetooth, the speakerphone shut off.
So it's so annoying to manually cut the speakerphone that I decided to reset my phone today.
I'm currently doing a backup with Helium (because I'm not yet rooted) and then I will do a factory reset.
I will keep you informed.
Problem still persists. Please keep us informed.
Finally...
After resetting my phone the problem is solved !!!
I reinstalled all my applications and it is still ok.
Now the question is for how long...
You know what you have to do.
Enjoy !
I for sure won't do that! I'll better be selling this bug loaded piece. Memory leakage issue is driving me nuts. Can't handle 3 apps without having to reload them every time. Veeeery disappointed. And I mean common.. the basic calling feature is not able to work properly.. WTF
Seems like not many are facing this issue? It came out of nowhere on mine and I really dont want to reset my phone for this. I'd like to keep this thread active.
Just reset your phone and that's it!
Sent from my SM-G920F using XDA Free mobile app
Same problem here and same case. When on Bluetooth in my car, the speaker will not auto enable, but whe I turn off BT, the problem persists. I tried the Svoice, The Partition Cache cleaning, the reset, etc. Up to now, no positive results.
I admitted defeat and reset my phone, problem gone
I've solved my speaker phone problem
Hi,
I use note 4 and had similar problem. After long testing, I've found out mine was related to Gear VR. If I turn on "do not disturb" inside the Gear VR setup Menu and unplug the phone. My phone will always go into speakerphone. Very annoying. If I go back into the Gear VR and enable the "do not disturb" and then disable it again (so "do not disturb" is off). My speaker phone problem goes away.
Do you use Gear VR on your phone? If you do, then your speaker phone issue is probably related to the problem I had.
I hope this post will help some of you.
i got here by doing google.
my phone is doing that too. everytime i answer the phone, the speaker is on, i have to turn it off everytime !
cant find any setting to disable it, i think i going to reset my phone too.
@netnerd, Never found a fix, quite easy to do a backup and restore using Helium app after resetting the phone.
Hello all I need help!
Just bought a seicane H286 MTCE_HF_V3.07_1 9" android 9 everything looks good except for the clock. everytime I turn off the engine and the time is 2:15pm, when I turn the engine back on 30mins or however long later the clock is starting at 2:15pm and counting. I toggled update time with GPS on/off, I toggled update with carrier on/off but nothing work. The only time it's update the time with GPS is when I reset the unit. really frustrating with tech support they keep insisting that the unit is automatically update time with gps! If anyone have any solution please help. thank you.
Yes, this is a known issue, search forums for details on update or contact reseller for support/update.
hello, even my autoradio (wondefoo) rh3368 mtce_cz, cpu octacore cortex-a53 @ 1.5 android 9 has your same problem ... surely there is a software bug, the seller told me that he will send me an update. .. ps to the most expert: is it possible to downgrade from android 9 to 8 without risking ?
ilfn143 said:
Hello all I need help!
Just bought a seicane H286 MTCE_HF_V3.07_1 9" android 9 everything looks good except for the clock. everytime I turn off the engine and the time is 2:15pm, when I turn the engine back on 30mins or however long later the clock is starting at 2:15pm and counting. I toggled update time with GPS on/off, I toggled update with carrier on/off but nothing work. The only time it's update the time with GPS is when I reset the unit. really frustrating with tech support they keep insisting that the unit is automatically update time with gps! If anyone have any solution please help. thank you.
Click to expand...
Click to collapse
I recently purchased a 10.1 Seicane H2038 rk3368 unit that seems to be using the same MTCE_HF_V3.07_1 firmware. I also had an issue with the time being incorrect when returning from sleep. I was able to correct the issue by updating the android OS to the latest available (in the Daisata updates thread) HA_px5_9.0_ota(20190521) - please note that that this performed a data reset when applying.
There appears to be a newer PX5 HA_px5_9.0_ota(20190528) firmware posted now that I have not tested, but I assume that should work as well:
https://forum.xda-developers.com/an...asaita-mcu-updates-rockchip-px5-octa-t3575155
I did not upgrade the MCU firmware.
If I know how to root it I can install clocksync and have it automatically sync the clock to gps signal
ilfn143 said:
If I know how to root it I can install clocksync and have it automatically sync the clock to gps signal
Click to expand...
Click to collapse
Or read the second post....
ilfn143 said:
Hello all I need help!
Just bought a seicane H286 MTCE_HF_V3.07_1 9" android 9 everything looks good except for the clock. everytime I turn off the engine and the time is 2:15pm, when I turn the engine back on 30mins or however long later the clock is starting at 2:15pm and counting. I toggled update time with GPS on/off, I toggled update with carrier on/off but nothing work. The only time it's update the time with GPS is when I reset the unit. really frustrating with tech support they keep insisting that the unit is automatically update time with gps! If anyone have any solution please help. thank you.
Click to expand...
Click to collapse
yesterday I installed the version ha_px5_9_ota and the problem of updating the timetable has been solved, the only problem is that as equalization power and audio volume is less than the original rom.
I solved it by rooting it and using tasker. What I found out was whenever I toggle location on and off the timeupdate to gps time, so I used tasker to toggle it.
First I rooted by using adb method found here: https://forum.xda-developers.com/an...5-mtcd-e-head-unit-discussion-thread-t3734189 (very helpful to watch the youtube video)
be sure to install hacker's keyboard from play store and use notepad++ on your pc. not sure why regular keyboard didn't work in terminal emulator. I had to root twice for it to work.
install tasker, in profile I set "Display State" to "on" so every time I turn on the car it'll run the task. In task I set it to wait 5 seconds, turn off location, wait a second and turn it back on.
go back to adb on pc and run command: adb shell pm grant net.dinglisch.android.taskerm android.permission.WRITE_SECURE_SETTINGS
that's it! now whenever I turn on the car it'll take a couple seconds to set the correct time.
hello, I have finished configuring everything and I must say that I am very satisfied with this version, if I can afford to give you some advice ... try installing it also because it seems better to receive gps satellites and do not need other applications to update the 'schedule.
My hu has Carplay built in and don’t want to risk it with a new rom
would it be the carplay?
mrt.angelo69 said:
would it be the carplay?
Click to expand...
Click to collapse
Apple Carplay
ilfn143 said:
First I rooted by using adb method found here: https://forum.xda-developers.com/an...5-mtcd-e-head-unit-discussion-thread-t3734189
Click to expand...
Click to collapse
Which method exactly?
kebul said:
Which method exactly?
Click to expand...
Click to collapse
Post #3
Any body have any version of mtce_hf plz
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk
I have a seicane radio in my ram truck, everything works well but I can't change the balance or fader, any ideas on how to correct this?
Sent from my VS996 using Tapatalk
moeduss said:
I have a seicane radio in my ram truck, everything works well but I can't change the balance or fader, any ideas on how to correct this?
Click to expand...
Click to collapse
What version of Android?
C75 said:
What version of Android?
Click to expand...
Click to collapse
Android 8
Sent from my VS996 using Tapatalk
moeduss said:
Android 8
Click to expand...
Click to collapse
Try installing this app on you HU and see if it works for you.
https://play.google.com/store/apps/details?id=jp.pioneer.mle.soundtune
Hi,
I am totally newbie in all of these, so I might not understand all the abbreviations - comprehensive replies are welcome
Patient is PX5 MTCE_LM
Some time ago my Head Unit just stopped receiving Internet connection. It connects to Wi-Fi or BT hotspot, but that's it. Web pages are not loading, YT not working, neither any online app. I have not changed anything in setting and make any updates. It just stopped. I don't recall now, but it might have occured for first time after my battery died? (Its been a while since its dead). Rebooted multiple times, also disconnected battery, but it didn't help. Any chance of fixing it or is it HW issue?
Bump.
draxoth said:
Bump.
Click to expand...
Click to collapse
You don't say what you have read and tried to resolve the issue. Also, what does reseller suggest, has that been tried
draxoth said:
Hi,
I am totally newbie in all of these, so I might not understand all the abbreviations - comprehensive replies are welcome
Patient is PX5 MTCE_LM
Some time ago my Head Unit just stopped receiving Internet connection. It connects to Wi-Fi or BT hotspot, but that's it. Web pages are not loading, YT not working, neither any online app. I have not changed anything in setting and make any updates. It just stopped. I don't recall now, but it might have occured for first time after my battery died? (Its been a while since its dead). Rebooted multiple times, also disconnected battery, but it didn't help. Any chance of fixing it or is it HW issue?
Click to expand...
Click to collapse
Check your time and date after a battery failure. If the date is too far out, a security feature will not let it connect.
Bob_Sanders said:
Check your time and date after a battery failure. If the date is too far out, a security feature will not let it connect.
Click to expand...
Click to collapse
Thank you man! You saved me from reinstalling system and taking radio out. It was 2019 but appearently thats enough to make internet stop working.
I have unpaired my phone from me Teyes unit however, each time I start the unit it continuously nags me to pair. Anyway to fix this?
marlonxp said:
I have unpaired my phone from me Teyes unit however, each time I start the unit it continuously nags me to pair. Anyway to fix this?
Click to expand...
Click to collapse
Did you "forget" it on both sides? on the phone and on the unit?
Vanishes from the Head Unit once I select forget on my phone.
Hi. Maybe you should reset your phone. If it doesn't help, maybe you should go to the phone settings and try to select the right option?
marlonxp said:
I have unpaired my phone from me Teyes unit however, each time I start the unit it continuously nags me to pair. Anyway to fix this?
Click to expand...
Click to collapse
Olesya13 said:
Hi. Maybe you should reset your phone. If it doesn't help, maybe you should go to the phone settings and try to select the right option?
Click to expand...
Click to collapse
Issue resides on the head unit, thanks for the assist.