Hey all!
I dropped my phone with my 5 thumbs the other day and managed to damage the touch capacitive portion of the screen. The AMOLED is fine but the screen just doesn't register touch properly anymore.
I purchased this phone in Korea and currently reside in China. After contacting Samsung support in both Korea and China, they both refused to help me.
The Chinese support told me that the displays on the Chinese version and the Korean version of the Z Flip 3 differ and they are not interchangeable.
The Korean support told me that I couldn't mail my device to Korea for them to fix it and that I had to find a representative in Korea to help me handle the paperwork etc.
I found some displays on the aftermarket in China.
I just want to know the following:
Is China Samsung support BSing me and can I actually use a Chinese display on a Korean version of the Flip 3?
Can I replace the capacitive touch without having to replace the AMOLED display?
I plan on going the DIY route if I can use a CN display. Any other advice you guys can offer me?
Thanks!
Related
Hi, i have a qtek 1010 with a broken touchscreen (only the glass) so i can not calibrate with my stylus and would like to know is there any software like PEN IRAZU (very bugy, when using it will change the screen with some garbage) to give and move a mouse pointer on the screen with the buttons.
hello. It is very easy to replace the glass. Just buy the glass to replace it.
thanks for reply, but where i am living there is no spare glass in the market, can you tell me where i can get one?
Thanks
Hi where are you living? I think you should go check ebay.
http://www.pdasmart.com/pdaphone.htm
I am living in Dubai in middle east, do you think theywill ship to M.E.?
Hi there:
Call this number in Dubai, they can help you 971 4 8873135 / 8873133 (nasco) I think they are the agents for QTEC in the ME.
Also, I had that reply from myfono.com Feedback :
Dear Sir,
Thanks for your e-mail. To repair your PPC, please call our service center, located in Dubai, United Arab Emirates.
+971 (04) 3437710.
Best of luck
Brightpoint can repair it in Airport Free Zone. Call 042994659 and ask for service center
HI kamiar,
HOW MUCH ARE THEY GONNA CHARGE YOU FOR THE TOUCH SCREEN?
they dont have the touchscreen and for the complete module are chrging around 250 US$.
anybody has a second hand or only the touchscreen to sell?
pllllllllllllssssssssssssssssss
i have a new touch screen, I come from China
Author Message
miaokai,
how can i get one????
touch screen
you should send me some money ,then i will mail it to you
what about sending me the item and then i send you money around 30 US$.
Hello, I have the 935F from the UK, I am currently in China for a few months. When changing the brightness up and down, four lines/bars appear on my screen which then grow larger or smaller based on my brightness setting. A handful of others have experienced the same problem too with the S7 Edge (not the standard).
Samsung said I can take it to a service center or send it to them in the UK and they will repair/replace the screen free of charge, but as I'm currently in China, I don't want to be without a phone for a few weeks. I asked the Samsung service center here and they said the screen is different, please can anyone confirm this is the case? I thought the screen was the same, but the internal radio components (frequencies used) differed slightly? I am happy to pay Samsung China the repair cost as it will be considerably easier than sending it back to the UK etc, but can anyone confirm the edge screen is identical?
nugget123 said:
Hello, I have the 935F from the UK, I am currently in China for a few months. When changing the brightness up and down, four lines/bars appear on my screen which then grow larger or smaller based on my brightness setting. A handful of others have experienced the same problem too with the S7 Edge (not the standard).
Samsung said I can take it to a service center or send it to them in the UK and they will repair/replace the screen free of charge, but as I'm currently in China, I don't want to be without a phone for a few weeks. I asked the Samsung service center here and they said the screen is different, please can anyone confirm this is the case? I thought the screen was the same, but the internal radio components (frequencies used) differed slightly? I am happy to pay Samsung China the repair cost as it will be considerably easier than sending it back to the UK etc, but can anyone confirm the edge screen is identical?
Click to expand...
Click to collapse
It's not just the internal radios: the Chinese version is the only other version of the S7 Edge that uses a Snapdragon 820 other than the US variants. And there are more differences between the SM-G9350/U/A/P/T/V/... (SD) and SM-G935F (Exynos) than we might know, and Samsung certainly understands quite a lot about their own product, so I'd advise you listen. (for example of small differences between the two that impacts other parts of the phone) the SD820 variant lacks a separate DAC and utilizes the 820's internal DAC, while the E8890 version has a Wolfson DAC.
Likely the difference is going to be the chipset (Snapdragon Vs Qualcom) however I cant say for sure if the internals are all in the same places for the S7 Edge Global Varients.
Might be worth posting in the S7 Edge forum to see if they are aware of anything?
Sorry I didn't realize there was an S7 Edge forum, could a moderator move this thread to there?
Good point, there are quite a lot of differences it seems.
Do you know if I bought a phone like the S7 Edge from Hong Kong, is it fully compatible in the UK? Would it be the 935F variant? I can't seem to find what variants are sold around the world and I know like America and China uses different frequencies for LTE, but saying that, I have the 935F and I'm picking up LTE fine in China.
I want to buy a LCD display for our Fold 2 and change myself, but I only find lcd in this website:
GH82-23943A Samsung SM-F916B Galaxy Z Fold2 5G LCD+Touch Display | | Zandparts
Buy Spare Parts for GH82-23943A Samsung SM-F916B Galaxy Z Fold2 5G LCD+Touch Black frame, used as standard display for multiple colorways (including Mystic Black & Mystic Bronze)SVC ASSY SMT-OCTA(E/ZK/PF)SM-F916,SUB UB. ZandParts is focused on spare parts and accessories for smartphones, tablets...
www.zandparts.com
In Rounded.com also is it, but i dont know nothing about this sites:
Samsung Galaxy Z Fold2 5G (SM-F916B) Display module LCD + Digitizer SUB GH82-23943A
Display module LCD + Digitizer Original replacement part. GH82-23943A
rounded.com
Please some opinions about these sites . THANKS
Nobody?
I don't know where are you located, but when I dropped my Z Fold 2 weeks after I bought it new, I took it to Los Angeles Samsung service center and without appointment and waiting they took the phone in service and after 2 hrs I was picking up my phone with new front screen and the price was $134.00 out the door. The screen you are looking at is 131 euros.... So unless you really want to do it by yourself just for fun, I don't see reason to buy from non trusted sources.
Hello,
My partner broke the display in her MOTOROLA ONE VISION XT1970-3.
On the local phone repair centre I found out that there are 3 versions of this phone, but due to the fact that they deal mainly with iPhones, they are not entirely sure if the display is universal for the XT1970-1 / 2/ 3 version.
Theoretically, you can buy a digitizer on websites that fits all 3 versions of this phone, but it's always better to ask.
Thank you in advance for your answer.
Hello to forum,
I just broke my screen from my Note 20 Ultra 5G (Snapdragon) Chinese model SM-N9860
The thing is that i am in Europe and we only have international model (Exynos).
My question is this, can i put exynos display to snapdragon? And if so, am i going to have signal? Cause i've heard that the antenna paths are different.
Thank you
I know the C port PCB is likely incapable.
Check by part numbers.
I spoke with Samsung Support while ago. And I thought to replace something, camera glass and front glass and they said there isn't issue to fix US variant in UK. So I think there isn't problem to use front glass from exynos model.
If the part numbers are the same you'll be ok.
Otherwise probably not.
Have u any idea if this part is ok?
Galaxy Note 20 Ultra 5G SM-N986 - White (GH82-23596C) (50027164) for my SM-N9860 ?
You need to compare the P/Ns between the two variants.
Someone here may have tried it and can say for sure if it's the same variants.
A repair shop experienced in these can probably tell you too.
Otherwise don't bet on it.
Little suggestion.
If you still are within warranty period then don't repair it your self or anyone that is non certified samsung technician.
Doing so will make rest of your warranty invalid, so send it back to store where you bought it or send it to samsung and let them repair it.
In my case, Samsung mexico repair my 986U1, same case, in the country sales exynos but the part is the same, they change the internal parts because the screen not sale separately, only inconvenient is they not replace the batery like with the national devices service included