I have Tesco Hudl 1 I have installed Custom TMF Firmware that over-rights the wifi certificate. But I am still only running 4.2.2 os. I need 5.1 os minimal, any ideas how I can achieve that ?
Related
Hey all,
Actually i am new to this forum and also in changing phone OS .
I want to downgrade my phone from lollipop 5.1 to kitkat 4.4.4 . About my phone : My phone is moto E first generation and currently running on lollipop 5.1 which i recieve through OTA. My phone is never Rooted or unlocked or done anyother thing . this is first time for me and for my phone.
Now i want to downgrade it due to slow processing after upgrading to lollipop.
i had three things root, unlock boot loader and TWRP(which i have heard is good). Is it necessary to root or unlockboot loader or both for downgrading , If Yes , how to do that .... and after that steps of downgrading with all the softwares required for downgrading .
Please help me i am fully frustated with lollipop 5.1 .
Thanks
Hello! I have an Unlocked Motorolla Moto G 4G LTE 5.1 (XT1040)
Some time ago, I unlocked the bootloader and rooted my device with the Peregrine root Software, but now I would like to Lock the Bootloader again, and I'm reading all kinds of different messages online saying that I can only Lock it again with a software of the same Android version (5.1) or else it could get bricked. But now I can't seem to find the specific Android version that I have to use, because I've also read that it has to be the same specific system version, but I can't find it. As far as I remember, I haven't installed any other ROM before.
I've already unrooted it through the supersu app.
Can I use, for example, this firmware?: XT1040_PEREGRINE_AMXPR_5.1_LPBS23.13-35.5-1_cid12_CFC.xml.zip
Specific Moto G info.
Android Version: 5.1
System Version: 23.26.5.peregrine_retla.retla.en.01 niipe
Compilation Version: LPB23.13-35.5
TWRP 2.7.1.0
I unlocked the bootloader and rooted it I change the stock os to Cyanogen Android 6.0. The os shows some problem then i flash the twrp stock moto 5.0
2 os backup. After few month It also shows problem and mobile stops working stuck at Moto logo Then I again flashed the stock Moto Android 6.0 by rsd lite. All done now it's bootloader is unlocked but it says device is not rooted. Now it's getting it's update of security. Should I install the update. It's annoying it's always pop of. I really wanna rid of it. Please anyone help me. Should I install the update. Does the present bootloader allow me install or my mobile shows problem. Reply please....... Moto g xt1068
Cyanogen is no more updated I believe.
It is time to switch to the best Lineage OS 14.1 ROM.
Follow tutorial here : https://forum.xda-developers.com/moto-g/help/guide-tutorial-motorola-moto-g-4g-to-t3516234
You'll have OTA updates .... and unleashed Moto G 4G (if not 4G, use specific ROM, Kernel and TWRP) but steps are the same.
djibe89 said:
Cyanogen is no more updated I believe.
It is time to switch to the best Lineage OS 14.1 ROM.
Follow tutorial here : https://forum.xda-developers.com/moto-g/help/guide-tutorial-motorola-moto-g-4g-to-t3516234
You'll have OTA updates .... and unleashed Moto G 4G (if not 4G, use specific ROM, Kernel and TWRP) but steps are the same.
Click to expand...
Click to collapse
WhatEver rom I applied the mobile getting slower and slower frustration surround me then finally flashed original stitched rom the mobile lagggggggy...
DazzG said:
WhatEver rom I applied the mobile getting slower and slower frustration surround me then finally flashed original stitched rom the mobile lagggggggy...
Click to expand...
Click to collapse
Hi,
The device is old but my Moto G 4G with LOS 16 and BitGApps is decent.
Hi.
I have a Hudl 2 that I managed to defeat the Wi-Fi issue at first boot, however I wanted to flash a rooted stock ROM and all the links are from way back and the images links are all expired and go nowhere.
I did manage to get some images, but not for my build number, which must have been the latest before Tesco pulled the plug on the support servers.
Does anyone have images for my build number: 20151102.170607 please?
All I want to do is remove the Tesco bundled bloatwear.
Kind regards.
To remove bloatware it's NOT needed to flash another ROM but to root tablet's actual Android KitKat.
jwoegerbauer said:
To remove bloatware it's NOT needed to flash another ROM but to root tablet's actual Android KitKat.
Click to expand...
Click to collapse
Hi thanks for the reply.
I've looked everywhere for a method to root it and all links are outdated or dead.
Basically, rooting just means to push a binary (su) and a helper app ( SuperUser/SuperUser or SuperSU ) to Android's system partition.
KingoRoot may do this job within 2 minutes.
jwoegerbauer said:
Basically, rooting just means to push a binary (su) and a helper app ( SuperUser/SuperUser or SuperSU ) to Android's system partition.
KingoRoot may do this job within 2 minutes.
Click to expand...
Click to collapse
mediaseller said:
Hi thanks.
I tried that and a few others but the Hudl firmware is blocking it.
Click to expand...
Click to collapse
lollipop isn't rootable on the hudl 2 afaik
Hi,
In case anyone is looking for clear instructions on how to overcome the problem after a factory reset of the Tesco Hudl 1 & 2 you will find them here (works for Hudl 2 as well). Use a date between 27 June 2019 and 26 June 2020 :
HUDL bricked after factory reset and how to fix it - Hey Munky!
I did a factory reset on my HUDL and bricked it. Here's a quick step-by-step guide on how to unbrick it after a factory reset.
www.heymunky.co.uk
Or the same with pictures but remember to use a date between 27 June 2019 and 26 June 2020 :
Rob's stuff - Hudl - Fix
Update 23 May 2023: This mechanism for recovery of a factory reset Hudl 1 no longer works. Due to the Tesco server at https://device.tesco.mobile.com/ no longer responding correctly to requests this technique no longer works and will fail after Step 18. As far as I know my Custom ROM is now the
rob.themayfamily.me.uk
(If this date solution ever fails then another option is to create a new user in the settings menu and reboot into it.)
Post if it works for you
I trying to an 70 year with her tesco hudl 1 tablet. I've put on custom hardware that allows you bypass expiry tesco certificate. But we need to upgrade it from kitekat to 5.1 . Can any tell how I update to that os or higher .please
Custom Hardware??? You have to install a Custom ROM.
GitHub - remay/tmf-hudl: Custom ROM for the Tesco Hudl 1 - Keep your Hudl working after 26th June 2020
Custom ROM for the Tesco Hudl 1 - Keep your Hudl working after 26th June 2020 - GitHub - remay/tmf-hudl: Custom ROM for the Tesco Hudl 1 - Keep your Hudl working after 26th June 2020
github.com
In order to upgrade to Android 5+ you have to find a Custom Recovery suitable to device as aslso a Custom ROM ( Android 5+ ) matching your device.