Database Info

How to unbrick the soft bricked Captivate

NOTE:
So far this has been the only sure fire method I've found to 100% get around any brick situation regardless of firmware, etc. This only works for the captivate, not any other galaxy s variant.
Situations: phone-!-Computer / no download mode
Black Screen / RST_STATUS 0x0
Procedure:
1. Remove the battery, external SD card and SIM card.
2. Wait 10 seconds.
3. Open odin3
4. Connect usb cable.
5. Hold volume up + volume down + Power.
6. Insert battery.
7. Release POWER BUTTON ONLY.
You should now be in immediate download mode.
Please forgive me if this is duplicate some where, but I tried every procedure I could find on google to no avail, then accidentally found this method just before I was going to box it back up and see if my buddy at AT&T would make me eat it or not.
My situation was: Launched Odin3 to flash H3 firmware, died twice in the middle, and on the third time locked up half ways just at the beginning of factoryfs.rfs -- Then the phone did nothing. Blackscreen is all. Interestingly enough, while in the state if you hold volume up + power, it will give a hw diagnostic screen. Beyond that I could get no where. Just a black screen, no acknowledgement when connected to PC, no charging indicator, nothing.
If this is a dupe Im sorry but this method I could not find and hope to make it readily available to people who may think their phones bricked.
Update 12/22/2010:
How to BRICK the phone / WARNING!!!
If for whatever reason you decide to use Odin to flash a stock GTI9000 ROM and manually add the kernels and modems using a "pure" 2.2.1 sammy rom. BEWARE.
Researching a lot, it seems the consensus is that the sbl in the 2.2.1 versions of the GTI9000 has *hard* download mode crippled.. Meaning if there is a software screw up YOU CANNOT USE A USB JIG OR ANY OTHER METHOD OF GETTING THE PHONE IN DOWNLOAD MODE!!! To fix it you'll need a new one or JTAG to replace the bootloader.
As far as I can tell, beyond getting completely rid of the AT&T logo, there is no need to flash boot/sbl to get the "purity" of the 2.2.1 sammy roms.
Extract all files from the tar EXCEPT boot/sbl and re-tar and flash just those to avoid overwriting the stock captivate boot loader.
Also, it does not appear the boot/sbl from the captivate 2.2 leak suffers this same problem.
For any one iffy on bricking their phones, stay away from roms that remove COMPLETELY the AT&T logo on boot. This generally means the boot loader has been messed with any you may be screwed if you soft brick the phone. Most CWM roms dont overwrite the boot/sbl, but some can and do. Watch yourself.. if it the AT&T logo goes away COMPLETELY, I recommend flashing JF6 with One click while the roms alive using adb reboot download and try another rom.

thanks!
worked...took a few tries but some trick with this captivate to get it into download mode.. i was totally bricked too, diag screen with PC/Phone icons and exclamation mark. for me 1.) plug usb, 2.) hold power and vol up/down and connect battery (it fell out) and i was in download mode

I guess a similar procedure was on the odin3 one click thread, but there is something different in your procedure, it's not my case but it would be nice if some people confirms this as this may be useful and if it really works it should be included in odin thread

What worked for me was: Pull the battery, sim and micro sd card. Open odin on the PC. Insert the battery. Hold vol up and down then with the buttons held connect the usb cable. Just remember to plug in the usb cable with the vol up and down held in and odin must be open on the computer.
I also ran into the vol up plus power red text screen. Interesting to note that one of the fields will change depending if the usb cable is connected or not.

mine is dead
mi samsung captivate was working great but, suddenly it go black and only the touch bottom have light, when i plug it in the a/c it show is charging. i'm mac user and a read that i ned to use odin3 but it not work on mac. how i can unbrick the phone???
is rooted with one click lag
the dbdata was modif to
thats all
HEEEEELLLLLPPPPPP

Odin will not open on the mac?
Cant you use a virtual machine and use Odin on a Mac that way?
Or else take the odin 3 single click for JF6 and use on a friends Windows Computer.

Please help - unable to flash back with Odin3
I have pretty much tried it all at this point and am trying to figure out what I'm doing wrong.
I followed the directions just in case get to the big yellow triangle with the droid shoveling and the screen stays at "downloading, do not turn off target..."
Of course I had Odin3 open already but its not seeing my phone, USB drives are installed am using Odin3 ver. 1.30.
Any help would be appreciated, TIA!

TechNut* said:
I have pretty much tried it all at this point and am trying to figure out what I'm doing wrong.
I followed the directions just in case get to the big yellow triangle with the droid shoveling and the screen stays at "downloading, do not turn off target..."
Of course I had Odin3 open already but its not seeing my phone, USB drives are installed am using Odin3 ver. 1.30.
Any help would be appreciated, TIA!
Click to expand...
Click to collapse
Best way to get download mode is use adb and type adb reboot download.
Or follow the volume up/down held with odin open on the computer, then you plug in the usb cable to the computer.

askpcguy said:
What worked for me was: Pull the battery, sim and micro sd card. Open odin on the PC. Insert the battery. Hold vol up and down then with the buttons held connect the usb cable. Just remember to plug in the usb cable with the vol up and down held in and odin must be open on the computer.
I also ran into the vol up plus power red text screen. Interesting to note that one of the fields will change depending if the usb cable is connected or not.
Click to expand...
Click to collapse
Thank you thank you thank you. i had a totally dead no boot or anything and this worked, i was going through the whole returning the phone senerio in my head

mattbeau said:
Thank you thank you thank you. i had a totally dead no boot or anything and this worked, i was going through the whole returning the phone senerio in my head
Click to expand...
Click to collapse
Just sharing the info! Makes you think twice about trying something else don't it?

does not seem to work because as soon as my battery touches the contacts it goes to the diag screen. do I have to release the power button in super human speed times there?
looked at all threads here, looked elsewhere -- there are some that are not fixable. Wanted to add that in case others come here and think that they might be the only ones that can't get it to work.
Ended up sending mine off to Samsung to reset today. :/

I love you! I called AT&T to send me documentation to sign and it was going to cost me 125 dollars to get it replaced even with warranty. And you fixed it !

i have tried just about every single method detailed in these forums, and nothing works.
Trying what OP suggested just sends me to the battery charging animation screen.
Anybody have any ideas ?

file analysis
I keep can get to the download screen and I hit start and it does the same thing everytime it just does File analysis i cant figure what i am doing wrong here somebody please help me

I think the issue was it had something to do with 64 bit windows 7 i just re did the stock rom one click solution and it worked fine

thekurrgan said:
NOTE:
5. Hold volume up + volume down + Power.
6. Insert battery.
7. Release POWER BUTTON ONLY.
You should now be in immediate download mode.
Click to expand...
Click to collapse
Thank you for sharing your experience.
I don't have a Captivate yet but am doing research on it and hopeful of getting one. I am confused about one thing.
Every where that I have read about how to enter Recovery mode or Download mode on the Captivate using the 3 button method, it says holding down both Volume UP + Volume Down (plus Power button) will enter Recovery mode. But you say it enters Download mode which is confusing to me. As I recall, to enter Download mode you must press the Vol Down only (plus Power button). Could it be because the phone won't go into Recovery mode, it goes into Download mode instead? Am I missing something?
Thank you!

Download mode is for updating the phone's firmware.
Remove battery, plug in the usb cable to the phone, open ODIN on the computer (need usb drivers installed before hand) on the phone hold volume up and down then plug the phone into the computer. Your phone will say DOWNLOADING. This method works even if you run into problems and the phone refuses to boot properly.
Recovery mode is for installing Update.zip. The method is tricky but involves holding volume up/down and power, the phone will show ATT then go black. It will repeat that but after the second time it goes black let go of power.
If that doesnt work, android debug tools ADB reboot recovery will work even better.
Or root the phone and use Clockwork Rom manager to boot into recovery, just press the menu item.

askpcguy said:
Download mode is for updating the phone's firmware.
Remove battery, plug in the usb cable to the phone, open ODIN on the computer (need usb drivers installed before hand) on the phone hold volume up and down then plug the phone into the computer. Your phone will say DOWNLOADING. This method works even if you run into problems and the phone refuses to boot properly.
Recovery mode is for installing Update.zip. The method is tricky but involves holding volume up/down and power, the phone will show ATT then go black. It will repeat that but after the second time it goes black let go of power.
If that doesn't work, android debug tools ADB reboot recovery will work even better.
Or root the phone and use Clockwork Rom manager to boot into recovery, just press the menu item.
Click to expand...
Click to collapse
Thank you askpcguy! I understand the difference between Download and Recovery modes.
So the procedural difference here is having the battery in + Power button, versus battery not in (use USB cable instead) and no Power button. Can the phone get power from the PC via the USB cable? This seems to differ from what the original poster said about download mode. Perhaps OP could edit his original post for clarification? Or am I still missing something? Thanks to all

The phone does get power from the USB cable.
The difference is one procedure uses the USB cable (download mode) and the other does not (Recovery mode).
The volume up+down method does not use the power button, the phone is powered on into download mode once you plug in the USB cable.
We say pull the battery to get the phone powered off. If a firmware flash stalled or doesn't complete, pull the battery and try again!

I now understand the precedural difference.
Thank you askpcguy!

[Q] No download, no recovery

I can't get past the Samsung logo. I cannot boot into recovery or download. What can I do? I've searched and read an no go with any of those solutions.

does it actually boot to android or gets stuck at logo
does it stay at logo forever or reboots after about 10secs, if reboots then its a stuck power button

Stuck at logo, no reboots. It doesn't come on when battery is taken out and put back in, so not stuck button.

if it boots u should be able to get into download/odin mode, how r u trying to get it into dl mode as i think ur doing it wrong, keep trying or maybe buy a usb jig as ive read that it will get it into dl mode but i havent tested that out

Power plus volume up and down. Not working

kindofabuzz said:
Power plus volume up and down. Not working
Click to expand...
Click to collapse
http://www.samsungupdate.com/androi...ocket-galaxy-s2-sgh-i727-with-key-combination
Give this a shot. Otherwise, you may be toast.

kindofabuzz said:
Power plus volume up and down. Not working
Click to expand...
Click to collapse
thats for booting to recovery not dl, get it into dl mode

vincom said:
thats for booting to recovery not dl, get it into dl mode
Click to expand...
Click to collapse
How to enter Download Mode on Galaxy S2 Skyrocket:
First of all, know that you will not use the Power button at all.
Connect your USB cable to the computer, but not to the device.
Now, pull off the battery from your device, and then place it back.
Press simultaneously the Volume Up + Volume Down buttons. With the buttons still pressed, connect the device to the USB cable.
The phone should turn on now, and a screen with a yellow triangle and a warning should appear on the screen.
Let go of the Volume Keys and press Volume Up once to enter Download Mode.

Nothing works, up, down, both same time, nothing. This started when I used Flashify to flash newest twrp .img. I think it's hosed.

recovery flashing should not interfere w/dl mode unless you flashed it for a different device which would of hard bricked it which yours is just a soft brick.
i dont think i ever seen a soft bricked i727 not being able to recover.
go through the ts for odin in my stickies
does pc see anything connected when phone is plugged in and booting
i would hazard a guess at a bad cable, usb port on phone or pc.
try just the volume down button b4 connecting cable, thats a rogers phone technique but you never know it might work if u have not tried it.
if all else fails a cheap usb jig might help

I've had USB cables in the past that transfer power perfectly well, but don't work to transfer data at all. Before considering your phone borked, I'd try a different cable, maybe a different port on your computer as well. I've taken Skyrockets right to death's door before, but even after frying them to one stop short of Hard-bricksville, Odin was always able to read them.

T.J. Bender said:
I've had USB cables in the past that transfer power perfectly well, but don't work to transfer data at all. Before considering your phone borked, I'd try a different cable, maybe a different port on your computer as well. I've taken Skyrockets right to death's door before, but even after frying them to one stop short of Hard-bricksville, Odin was always able to read them.
Click to expand...
Click to collapse
I tried a different call and port. I guess this thing is hosed. Thanks Flashify. I should have just installed a twrp zip.

Please help me

Hi
I've made a bad mistake which I'm hoping people can help me with. I tried updating my phone wit MIUI 8 as I had an issue with my battery. My updater app on my phone was not working so I downloaded zip file and tried doing it manually from the app. Then my phone just turned off and I'm unable to turn on or charge. None of the button combinations work and when I plug in to my laptop through usb port I get a message saying it doesn't recognise device. I've tried using unlock function on website but get error messages in chinese around ip address to malfunctioned phone number so no luck there.
Appreciate any help as I had a lot of information, apps and data that i would hate to lose. I lost my wife 3 months ago and I have some precious memories on that phone. I know I should have done a backup beforehand and that was stupid of me.
Is there anyway i get can my back in without losing data. if not then anyway at all to get my phone working.
Thanks, from a very down MI4C user

Try holding one of the power buttons(don't remember which one) and plug in the cable so the phone boots into fastboot mode. If you manage to get into fastboot boot TWRP and copy your files straight from it as it has mtp support. If your PC sees your phone as an unrecognizable device there's a big chance you can recover your data. Last hope would be to use a modified usb cable for edl flashing although this way you'll most likely lose your data.

Adi393 said:
Try holding one of the power buttons(don't remember which one) and plug in the cable so the phone boots into fastboot mode. If you manage to get into fastboot boot TWRP and copy your files straight from it as it has mtp support. If your PC sees your phone as an unrecognizable device there's a big chance you can recover your data. Last hope would be to use a modified usb cable for edl flashing although this way you'll most likely lose your data.
Click to expand...
Click to collapse
Thanks, first suggestion doesn't work unfortunately. I have now been given permission to unlock bootloader but problem is the device is not recgonised due to usb issue.
So I cant turn on, won't charge etc and none of button combinations work. Has anyone encountered the issue with usb before. Unsure of 'modified usb cable for edl flashing'. All very frustrating.
thanks for any help

Anyone else have any ideas. Desperate here without my phone and important data

Have tried everything at this stage...utter despair. My phone just won't turn on or charge or enter fastboot mode etc
Anyone please help

The modified USB cable that I spoke of is used to force boot the phone into emergency download mode. It's baisicly a last hope flashing method that should work regardless of how broken the phone is. The only downside is that using this mode you only can flash via miflash and this will wipe your data. As for the cable you can either make one (look for deep flash USB cable schematic, it involves swapping 2 wires) or just buy one. Once you get into edl just follow the unofficial bootloader unlock guide to flash the 6.1.7 rom as it is flashed in the emergency mode.
Edit: whenever you plug your phone into your PC does the screen or led diode light up at all? You can also try holding vol- and power button and plug the phone into a charger (not PC) to see if it will respond at all. Charger gives more current so maybe it will force the phone to boot.

Adi393 said:
The modified USB cable that I spoke of is used to force boot the phone into emergency download mode. It's baisicly a last hope flashing method that should work regardless of how broken the phone is. The only downside is that using this mode you only can flash via miflash and this will wipe your data. As for the cable you can either make one (look for deep flash USB cable schematic, it involves swapping 2 wires) or just buy one. Once you get into edl just follow the unofficial bootloader unlock guide to flash the 6.1.7 rom as it is flashed in the emergency mode.
Edit: whenever you plug your phone into your PC does the screen or led diode light up at all? You can also try holding vol- and power button and plug the phone into a charger (not PC) to see if it will respond at all. Charger gives more current so maybe it will force the phone to boot.
Click to expand...
Click to collapse
Thanks Adi. I don't think I will be able to make one. I've seen some threads elsewhere about getting into EDL mode, do you always require modified cable to do so?
Nohting happens when I plug it into PC, no lights etc. Tried charging using normal power supply but nothing happens either. Have even tried connecting to powerbank overnight but no power is taken from it.

colb16 said:
Thanks Adi. I don't think I will be able to make one. I've seen some threads elsewhere about getting into EDL mode, do you always require modified cable to do so?
Nohting happens when I plug it into PC, no lights etc. Tried charging using normal power supply but nothing happens either. Have even tried connecting to powerbank overnight but no power is taken from it.
Click to expand...
Click to collapse
So there is no "unrecognized device" popping up in windows anymore?
If so, let the phone lie for 1 more day (without connecting any power sources to it). Afterwards charge it (with a normal charger and a cable that works for another phone) for about 2 days (or until you see the notification led charging). if nothing happens you can try a different charger or an usb port for another 2 days.
If your computer recognizes the device ("unrecognized device" or just any reaction by connecting the phone) try to reinstall all the drivers (xiaomis/qualcoms, as well as adb, fastboot) and see if there is something happening.
Report back if it helped.
Edit: Did you try different cables? had similar problems with op2 (not recognizing) with xiaomi cable...
Edit2: to make sure the device is completely dead, use a linux distro (e.g. Ubuntu, ensures that there are no driver problems, you can install it on a usb drive) and a cable which surely works (try it on at least 2 other phones, if data transfer works its ok) then first install fastboot (ctrl+t to open a terminal) by copy/pasting "sudo apt-get install android-tools-adb android-tools-fastboot". Afterwards hold vol- and power button for at least 12secs and plug mi4c in (release the buttons after plugging it in). Now you can run "sudo fastboot devices" and see if there is sth listed (should even recognize it in edl).

colb16 said:
Thanks Adi. I don't think I will be able to make one. I've seen some threads elsewhere about getting into EDL mode, do you always require modified cable to do so?
Nohting happens when I plug it into PC, no lights etc. Tried charging using normal power supply but nothing happens either. Have even tried connecting to powerbank overnight but no power is taken from it.
Click to expand...
Click to collapse
You don't need to use the modified cable as you can enter edl from fastboot, but the cable method is used to force the phone into it if you can't enter it the normal way. As for rescuing it, try the method @wertus33333 suggested.

wertus33333 said:
So there is no "unrecognized device" popping up in windows anymore?
If so, let the phone lie for 1 more day (without connecting any power sources to it). Afterwards charge it (with a normal charger and a cable that works for another phone) for about 2 days (or until you see the notification led charging). if nothing happens you can try a different charger or an usb port for another 2 days.
If your computer recognizes the device ("unrecognized device" or just any reaction by connecting the phone) try to reinstall all the drivers (xiaomis/qualcoms, as well as adb, fastboot) and see if there is something happening.
Report back if it helped.
Edit: Did you try different cables? had similar problems with op2 (not recognizing) with xiaomi cable...
Edit2: to make sure the device is completely dead, use a linux distro (e.g. Ubuntu, ensures that there are no driver problems, you can install it on a usb drive) and a cable which surely works (try it on at least 2 other phones, if data transfer works its ok) then first install fastboot (ctrl+t to open a terminal) by copy/pasting "sudo apt-get install android-tools-adb android-tools-fastboot". Afterwards hold vol- and power button for at least 12secs and plug mi4c in (release the buttons after plugging it in). Now you can run "sudo fastboot devices" and see if there is sth listed (should even recognize it in edl).
Click to expand...
Click to collapse
Did it work?? Any information would be appreciated, so the next one with this problem doesn't have to open a new thread.... @colb16

Apologies for not updating, I got an answer on MIUI official forum from a very helpful member called Codex. Below are steps he asked me to follow and although it took a few attempts my phone came back to life after following below and then pressing power and volume down for numerous minutes.
18:29, Sep-05-2017 | From PC |
Download ROM flashing Tool http://en.miui.com/a-234.html
Then download fastboot rom, if you don't have previously downloaded one. http://en.miui.com/a-234.html
extract the fastboot ROM
Select extract location in flashing tool
connect your phone
refresh
select SAVE USER DATA
flash

[Resolved] [HELP] Phone not reacting, power button broken

Hi,
I have a problem with my Motorola Moto G4. I bought it 2 months ago and unfortunately the power button broke and I am therefore not able to turn my phone on/off. That is in general not a problem since the device is still under warranty and I will get the phone repaired. The problem is that I want to backup my data, which I am not able to, before getting the device repaired since the workshop will reset the phone.
I am still able to unlock the phone but no apps or windows can be opened (taping on an app icon does not do anything). Dragging down the notification bar is possible and if connected via USB I can still see the status, unfortunately I am not able to change the setting from charging only to data connection. Since the power button is broken I am not able to reboot the device. I tried to use the adb tools to reboot but the device is not authorized and I would need to change that on the phone which I am not able to. Is there any way to reboot the phone or to access the data.
Any help would be really appreciated.

you might be able to try the commands for adb reboot recovery as the phone is booting up - iv never tried it but adb should be working after the moto splash screen (during the boot animation)
Im not sure if it needs authorisation during that stage but if you cant get into recovery and you cant change the usb connection/authorise adb then I cant see any other way to get the data off

TheFixItMan said:
you might be able to try the commands for adb reboot recovery as the phone is booting up - iv never tried it but adb should be working after the moto splash screen (during the boot animation)
Im not sure if it needs authorisation during that stage but if you cant get into recovery and you cant change the usb connection/authorise adb then I cant see any other way to get the data off
Click to expand...
Click to collapse
I am not really sure how to follow your advice since I am not able to shut down / reboot the phone (power button is not working).

Nem1c said:
I am not really sure how to follow your advice since I am not able to shut down / reboot the phone (power button is not working).
Click to expand...
Click to collapse
In that case I don't see how you can access anything if you have no adb & you can't select anything on the phone

TheFixItMan said:
In that case I don't see how you can access anything if you have no adb & you can't select anything on the phone
Click to expand...
Click to collapse
If I would drain the battery to "shut down" the phone, would there be a way to turn the phone on without the power button?

Nem1c said:
If I would drain the battery to "shut down" the phone, would there be a way to turn the phone on without the power button?
Click to expand...
Click to collapse
with older samsung devices you could use a usb jig to get into download mode without the power button (its a usb cable with some pins crossed you can buy them for only £1 off amazon/ebay)
even if it did work you would still need the power button to select the option to restart phone so the answer is nothing that I can think of

TheFixItMan said:
with older samsung devices you could use a usb jig to get into download mode without the power button (its a usb cable with some pins crossed you can buy them for only £1 off amazon/ebay)
even if it did work you would still need the power button to select the option to restart phone so the answer is nothing that I can think of
Click to expand...
Click to collapse
I found some mechanisms to get the phone turned on and I will try them out. I guess I have nothing to lose.
The interesting thing is that my phone is still receiving messages and news (I see them in the notification bar), so things like that are still working but unfortunately new "widows" can't be opened.
Thank you for your help.

I was able to get the phone rebooted and after the restart everything works as it should.
This is what I did:
Drain the battery (using the flash light), once the battery is flat connect the phone to the PC
Press and hold the volume down button until the Fastboot menu appears
Download ADB tools (the minimal version with adb and fastboot is sufficient)
Install the Motorola driver on the PC (I was not aware that I need this, since connecting the phone without the driver being installed and running adb device results in the device being shown)
run fastboot reboot

Stuck at entering fastboot mode

How can I get my Galaxy Note 20 Ultra out of stuck at 'entering fastboot mode'?

Hold down power and volume down until it reboots back to recovery. I got stuck there last week and that's what worked for me.
Sent from my SM-N986U1 using Tapatalk

Is this problem solved? I cannot boot into bootloader mode, thanks!

Switch off the device. Then hold volume up and down buttons and insert the USB cable plugged to PC. You will get to download/odin mode

shantanil said:
Switch off the device. Then hold volume up and down buttons and insert the USB cable plugged to PC. You will get to download/odin mode
Click to expand...
Click to collapse
Download mode is different from fatboot mode, I can enter, and works ok download mode. However, fastboot does not, it gets stuck in entering fastboot mode and no fastboot command works

I got same issue here, I've tried rooting via TWRP and after data wipe and "reboot to recovery" it got stuck in same thing and doesn't move at all, if I hold power and vol down it just boots the device which i dont want since i need to flash magisk as a last step. if anyone encountered this or knows how to fix it i'd be helpful

I'm not rooted but I've had past Samsung devices that I was able to root and if I'm not mistaken Samsung phones aren't able to boot into fastboot mode because Samsung removed the ability to. You can run commands via ADB mode but I think that's about it

adj998 said:
I'm not rooted but I've had past Samsung devices that I was able to root and if I'm not mistaken Samsung phones aren't able to boot into fastboot mode because Samsung removed the ability to. You can run commands via ADB mode but I think that's about it
Click to expand...
Click to collapse
Yea I fixed it somehow I don't even know myself

i cant eneter into download mode by using volume up and volume down ... the only thing that happens is the battery display kicks in .. is there a trick on how long to hold the volume bottons .. or any special way of doing it .. or for the usb c while trying to connect it to the computer
it gets stuck into fastboot entering if i try to do it the old fashion way .. please help

Guys, turn off the phone, press volume up and volume down together, and plug the usb cable while pressing volume up and down, and wait until the phone enter in downloading mode. This work for me.

leonardo_evaldy said:
Guys, turn off the phone, press volume up and volume down together, and plug the usb cable while pressing volume up and down, and wait until the phone enter in downloading mode. This work for me.
Click to expand...
Click to collapse
Thanks Man. This worked.

Since we can"t enter into fastboot mode is it possible to flash boot.img with adb commands?

I m having the same problem with a21s(a217f). I can t enter download mode using key combinations and the other way launching it from recovery doesn t work, it stays stuck at,, entering fastboot mode,,
The ROM is already bricked, it says in recovery when i try to factory reset the following error:,, can t mount. /system (structure needs cleaning)
Even with,, apply up. with adb,, doesn t work, it just doesn t get detected on my computer when i checked with adb tools.
! The only thing that works is that I can access my sd card and apply a update from sd card but I don t know where to get the update file. (I ll edit if it works to flash stock rom from,, apply update from sd card,, )
Anybody got some ideas or should i burn my motherboard and replace it?
sorry for bad english

Honestly plug device into PC.
Power off device
hold all 3 side buttons. Volume up and down and power/bixby.
Should usually work.
After in fast boot you must press a button Volume button to find via odin.

ivoe said:
Honestly plug device into PC.
Power off device
hold all 3 side buttons. Volume up and down and power/bixby.
Should usually work.
After in fast boot you must press a button Volume button to find via odin.
Click to expand...
Click to collapse
I already did that, unplugged the battery, reconnected it after 1min, connected my phone to the computer and pressed all 3 side buttons, still doesn t work. I guess the download mode is deleted or something..

Volume up & down, no side key, then connect to PC. Works for me. Connect to PC first does not work for me.

guru96 said:
I already did that, unplugged the battery, reconnected it after 1min, connected my phone to the computer and pressed all 3 side buttons, still doesn t work. I guess the download mode is deleted or something..
Click to expand...
Click to collapse
It wouldn't be deleted as it's a safety protocol if the device has a bad update and freaks out.
Maybe try to person above method.
Normally I can enter download mode with any of these methods if you cannot I'd suggest trying to get the device replaced due to software malfunction

altojd said:
Since we can"t enter into fastboot mode is it possible to flash boot.img with adb commands?
Click to expand...
Click to collapse
Samsung phones use a tool called Odin to flash firmware. If you're flashing custom firmware firmware you'll need to have your bootloader unlocked.

I got mine into download mode just now. It's a Galaxy A13 .. Like stated above, try to hold all three buttons down and connect to USB. I had to let go before it showed the battery charge icon. From off. If not from off try from charging. I think that's what I did just now. Plug the usb -> let it show the charging icon (from powered off!) -> hold all three buttons, let it power on, let go. DONE.

just follow this video it helped me a lot to unlock my boot loader