I can't get past the Samsung logo. I cannot boot into recovery or download. What can I do? I've searched and read an no go with any of those solutions.
does it actually boot to android or gets stuck at logo
does it stay at logo forever or reboots after about 10secs, if reboots then its a stuck power button
Stuck at logo, no reboots. It doesn't come on when battery is taken out and put back in, so not stuck button.
if it boots u should be able to get into download/odin mode, how r u trying to get it into dl mode as i think ur doing it wrong, keep trying or maybe buy a usb jig as ive read that it will get it into dl mode but i havent tested that out
Power plus volume up and down. Not working
kindofabuzz said:
Power plus volume up and down. Not working
Click to expand...
Click to collapse
http://www.samsungupdate.com/androi...ocket-galaxy-s2-sgh-i727-with-key-combination
Give this a shot. Otherwise, you may be toast.
kindofabuzz said:
Power plus volume up and down. Not working
Click to expand...
Click to collapse
thats for booting to recovery not dl, get it into dl mode
vincom said:
thats for booting to recovery not dl, get it into dl mode
Click to expand...
Click to collapse
How to enter Download Mode on Galaxy S2 Skyrocket:
First of all, know that you will not use the Power button at all.
Connect your USB cable to the computer, but not to the device.
Now, pull off the battery from your device, and then place it back.
Press simultaneously the Volume Up + Volume Down buttons. With the buttons still pressed, connect the device to the USB cable.
The phone should turn on now, and a screen with a yellow triangle and a warning should appear on the screen.
Let go of the Volume Keys and press Volume Up once to enter Download Mode.
Nothing works, up, down, both same time, nothing. This started when I used Flashify to flash newest twrp .img. I think it's hosed.
recovery flashing should not interfere w/dl mode unless you flashed it for a different device which would of hard bricked it which yours is just a soft brick.
i dont think i ever seen a soft bricked i727 not being able to recover.
go through the ts for odin in my stickies
does pc see anything connected when phone is plugged in and booting
i would hazard a guess at a bad cable, usb port on phone or pc.
try just the volume down button b4 connecting cable, thats a rogers phone technique but you never know it might work if u have not tried it.
if all else fails a cheap usb jig might help
I've had USB cables in the past that transfer power perfectly well, but don't work to transfer data at all. Before considering your phone borked, I'd try a different cable, maybe a different port on your computer as well. I've taken Skyrockets right to death's door before, but even after frying them to one stop short of Hard-bricksville, Odin was always able to read them.
T.J. Bender said:
I've had USB cables in the past that transfer power perfectly well, but don't work to transfer data at all. Before considering your phone borked, I'd try a different cable, maybe a different port on your computer as well. I've taken Skyrockets right to death's door before, but even after frying them to one stop short of Hard-bricksville, Odin was always able to read them.
Click to expand...
Click to collapse
I tried a different call and port. I guess this thing is hosed. Thanks Flashify. I should have just installed a twrp zip.
Related
NOTE:
So far this has been the only sure fire method I've found to 100% get around any brick situation regardless of firmware, etc. This only works for the captivate, not any other galaxy s variant.
Situations: phone-!-Computer / no download mode
Black Screen / RST_STATUS 0x0
Procedure:
1. Remove the battery, external SD card and SIM card.
2. Wait 10 seconds.
3. Open odin3
4. Connect usb cable.
5. Hold volume up + volume down + Power.
6. Insert battery.
7. Release POWER BUTTON ONLY.
You should now be in immediate download mode.
Please forgive me if this is duplicate some where, but I tried every procedure I could find on google to no avail, then accidentally found this method just before I was going to box it back up and see if my buddy at AT&T would make me eat it or not.
My situation was: Launched Odin3 to flash H3 firmware, died twice in the middle, and on the third time locked up half ways just at the beginning of factoryfs.rfs -- Then the phone did nothing. Blackscreen is all. Interestingly enough, while in the state if you hold volume up + power, it will give a hw diagnostic screen. Beyond that I could get no where. Just a black screen, no acknowledgement when connected to PC, no charging indicator, nothing.
If this is a dupe Im sorry but this method I could not find and hope to make it readily available to people who may think their phones bricked.
Update 12/22/2010:
How to BRICK the phone / WARNING!!!
If for whatever reason you decide to use Odin to flash a stock GTI9000 ROM and manually add the kernels and modems using a "pure" 2.2.1 sammy rom. BEWARE.
Researching a lot, it seems the consensus is that the sbl in the 2.2.1 versions of the GTI9000 has *hard* download mode crippled.. Meaning if there is a software screw up YOU CANNOT USE A USB JIG OR ANY OTHER METHOD OF GETTING THE PHONE IN DOWNLOAD MODE!!! To fix it you'll need a new one or JTAG to replace the bootloader.
As far as I can tell, beyond getting completely rid of the AT&T logo, there is no need to flash boot/sbl to get the "purity" of the 2.2.1 sammy roms.
Extract all files from the tar EXCEPT boot/sbl and re-tar and flash just those to avoid overwriting the stock captivate boot loader.
Also, it does not appear the boot/sbl from the captivate 2.2 leak suffers this same problem.
For any one iffy on bricking their phones, stay away from roms that remove COMPLETELY the AT&T logo on boot. This generally means the boot loader has been messed with any you may be screwed if you soft brick the phone. Most CWM roms dont overwrite the boot/sbl, but some can and do. Watch yourself.. if it the AT&T logo goes away COMPLETELY, I recommend flashing JF6 with One click while the roms alive using adb reboot download and try another rom.
thanks!
worked...took a few tries but some trick with this captivate to get it into download mode.. i was totally bricked too, diag screen with PC/Phone icons and exclamation mark. for me 1.) plug usb, 2.) hold power and vol up/down and connect battery (it fell out) and i was in download mode
I guess a similar procedure was on the odin3 one click thread, but there is something different in your procedure, it's not my case but it would be nice if some people confirms this as this may be useful and if it really works it should be included in odin thread
What worked for me was: Pull the battery, sim and micro sd card. Open odin on the PC. Insert the battery. Hold vol up and down then with the buttons held connect the usb cable. Just remember to plug in the usb cable with the vol up and down held in and odin must be open on the computer.
I also ran into the vol up plus power red text screen. Interesting to note that one of the fields will change depending if the usb cable is connected or not.
mine is dead
mi samsung captivate was working great but, suddenly it go black and only the touch bottom have light, when i plug it in the a/c it show is charging. i'm mac user and a read that i ned to use odin3 but it not work on mac. how i can unbrick the phone???
is rooted with one click lag
the dbdata was modif to
thats all
HEEEEELLLLLPPPPPP
Odin will not open on the mac?
Cant you use a virtual machine and use Odin on a Mac that way?
Or else take the odin 3 single click for JF6 and use on a friends Windows Computer.
Please help - unable to flash back with Odin3
I have pretty much tried it all at this point and am trying to figure out what I'm doing wrong.
I followed the directions just in case get to the big yellow triangle with the droid shoveling and the screen stays at "downloading, do not turn off target..."
Of course I had Odin3 open already but its not seeing my phone, USB drives are installed am using Odin3 ver. 1.30.
Any help would be appreciated, TIA!
TechNut* said:
I have pretty much tried it all at this point and am trying to figure out what I'm doing wrong.
I followed the directions just in case get to the big yellow triangle with the droid shoveling and the screen stays at "downloading, do not turn off target..."
Of course I had Odin3 open already but its not seeing my phone, USB drives are installed am using Odin3 ver. 1.30.
Any help would be appreciated, TIA!
Click to expand...
Click to collapse
Best way to get download mode is use adb and type adb reboot download.
Or follow the volume up/down held with odin open on the computer, then you plug in the usb cable to the computer.
askpcguy said:
What worked for me was: Pull the battery, sim and micro sd card. Open odin on the PC. Insert the battery. Hold vol up and down then with the buttons held connect the usb cable. Just remember to plug in the usb cable with the vol up and down held in and odin must be open on the computer.
I also ran into the vol up plus power red text screen. Interesting to note that one of the fields will change depending if the usb cable is connected or not.
Click to expand...
Click to collapse
Thank you thank you thank you. i had a totally dead no boot or anything and this worked, i was going through the whole returning the phone senerio in my head
mattbeau said:
Thank you thank you thank you. i had a totally dead no boot or anything and this worked, i was going through the whole returning the phone senerio in my head
Click to expand...
Click to collapse
Just sharing the info! Makes you think twice about trying something else don't it?
does not seem to work because as soon as my battery touches the contacts it goes to the diag screen. do I have to release the power button in super human speed times there?
looked at all threads here, looked elsewhere -- there are some that are not fixable. Wanted to add that in case others come here and think that they might be the only ones that can't get it to work.
Ended up sending mine off to Samsung to reset today. :/
I love you! I called AT&T to send me documentation to sign and it was going to cost me 125 dollars to get it replaced even with warranty. And you fixed it !
i have tried just about every single method detailed in these forums, and nothing works.
Trying what OP suggested just sends me to the battery charging animation screen.
Anybody have any ideas ?
file analysis
I keep can get to the download screen and I hit start and it does the same thing everytime it just does File analysis i cant figure what i am doing wrong here somebody please help me
I think the issue was it had something to do with 64 bit windows 7 i just re did the stock rom one click solution and it worked fine
thekurrgan said:
NOTE:
5. Hold volume up + volume down + Power.
6. Insert battery.
7. Release POWER BUTTON ONLY.
You should now be in immediate download mode.
Click to expand...
Click to collapse
Thank you for sharing your experience.
I don't have a Captivate yet but am doing research on it and hopeful of getting one. I am confused about one thing.
Every where that I have read about how to enter Recovery mode or Download mode on the Captivate using the 3 button method, it says holding down both Volume UP + Volume Down (plus Power button) will enter Recovery mode. But you say it enters Download mode which is confusing to me. As I recall, to enter Download mode you must press the Vol Down only (plus Power button). Could it be because the phone won't go into Recovery mode, it goes into Download mode instead? Am I missing something?
Thank you!
Download mode is for updating the phone's firmware.
Remove battery, plug in the usb cable to the phone, open ODIN on the computer (need usb drivers installed before hand) on the phone hold volume up and down then plug the phone into the computer. Your phone will say DOWNLOADING. This method works even if you run into problems and the phone refuses to boot properly.
Recovery mode is for installing Update.zip. The method is tricky but involves holding volume up/down and power, the phone will show ATT then go black. It will repeat that but after the second time it goes black let go of power.
If that doesnt work, android debug tools ADB reboot recovery will work even better.
Or root the phone and use Clockwork Rom manager to boot into recovery, just press the menu item.
askpcguy said:
Download mode is for updating the phone's firmware.
Remove battery, plug in the usb cable to the phone, open ODIN on the computer (need usb drivers installed before hand) on the phone hold volume up and down then plug the phone into the computer. Your phone will say DOWNLOADING. This method works even if you run into problems and the phone refuses to boot properly.
Recovery mode is for installing Update.zip. The method is tricky but involves holding volume up/down and power, the phone will show ATT then go black. It will repeat that but after the second time it goes black let go of power.
If that doesn't work, android debug tools ADB reboot recovery will work even better.
Or root the phone and use Clockwork Rom manager to boot into recovery, just press the menu item.
Click to expand...
Click to collapse
Thank you askpcguy! I understand the difference between Download and Recovery modes.
So the procedural difference here is having the battery in + Power button, versus battery not in (use USB cable instead) and no Power button. Can the phone get power from the PC via the USB cable? This seems to differ from what the original poster said about download mode. Perhaps OP could edit his original post for clarification? Or am I still missing something? Thanks to all
The phone does get power from the USB cable.
The difference is one procedure uses the USB cable (download mode) and the other does not (Recovery mode).
The volume up+down method does not use the power button, the phone is powered on into download mode once you plug in the USB cable.
We say pull the battery to get the phone powered off. If a firmware flash stalled or doesn't complete, pull the battery and try again!
I now understand the precedural difference.
Thank you askpcguy!
I've been using custom roms for over a year with no problems, but am wondering if I'm currently facing a possibly bricked Captivate (unless I pursue the jig solution).
I'm really hoping there's another solution as I can ADB into my phone, but it still won't accept reboot download commands, it just simply reboots.
So technically, I can send commands to my phone with ADB, but download mode just doesn't want to work.
Are there any other avenues I can pursue?
I've tried various 3 button combo tricks to enter download mode and the aforementioned ADB reboot download.
I've been actively searching for a solution for 3 hours now and wouldn't post here if I wasn't desperate.
Same thing happened to me. Jig fixed it all.
BelvedereWRX said:
I've been using custom roms for over a year with no problems, but am wondering if I'm currently facing a possibly bricked Captivate (unless I pursue the jig solution).
I'm really hoping there's another solution as I can ADB into my phone, but it still won't accept reboot download commands, it just simply reboots.
So technically, I can send commands to my phone with ADB, but download mode just doesn't want to work.
Are there any other avenues I can pursue?
I've tried various 3 button combo tricks to enter download mode and the aforementioned ADB reboot download.
I've been actively searching for a solution for 3 hours now and wouldn't post here if I wasn't desperate.
Click to expand...
Click to collapse
Try this:
Open Odin and plug the cable into your computer only not your phone
Remove your battery from your phone
Wait 30 seconds and put it back in, don't turn your phone on
Hold both volume buttons down and then plug the cable into your phone, it should go into download mode.
jhernand1102 said:
Try this:
Open Odin and plug the cable into your computer only not your phone
Remove your battery from your phone
Wait 30 seconds and put it back in, don't turn your phone on
Hold both volume buttons down and then plug the cable into your phone, it should go into download mode.
Click to expand...
Click to collapse
Just tried, but no go.
This thing really doesn't want to enter DL mode.
try a few more times mine did that i thought it was bricked did it like 10 x before it worked, just make sure you open and close odin each time, then plug phone in with it off holding both volume buttons, if doesnt work remove battery pull cable put battery back close odin reopen odin, hold volume buttons and insert cable
BelvedereWRX said:
Just tried, but no go.
This thing really doesn't want to enter DL mode.
Click to expand...
Click to collapse
Well if that doesn't work then I think you need to make or buy a jig to force it to download mode.
Guys need serious technical help..............................
i have rooted my phone with super one click all things were going fine.installed rom manager to backup my stock ROM and committed a mistake and installed wrong cwm and tried to backup my stock rom.selecting the backup option it Suppose reboot my phone in download mode which doesn't happen. and now i dose not have any access to my phone.
I searched whole forum and haven't found any solution.please help me.
Need guidance..
download and install pratyush.creed rom using odin and ur phone will be fine again
Bricked Screen (A.K.A. phone-!-pc or Black Screen of Death)
To recover from this problem, you'll need to get into the Download Mode.
Black Screen of Death:A fully bricked phone will not boot, or display the charging logo when connected to a USB charger. This presently cannot be recovered from any recovery attempt, it will require the phone to be sent back to Samsung and be serviced.
This screen does not always mean your phone is bricked. If you have a hardware locked vibrant, maybe, however, if your phone is not hardware locked, unplug the USB cable from the phone, Hold down Vol UP+Vol Down+Power, the screen will flash black, continue holding down all 3 buttons, you will see the "phone--!--PC" screen again, continue holding all 3 buttons, the screen will flash black again, release the power button only. This will put you into Download Mode.
If this does not work, open odin. Then connect your usb cable to your phone and computer. While the USB is plugged in and Odin running press and hold volume down + Home + Power. Once the black screen comes (flashes) release the Power Button. It should get into download mode.
Additionally it is possible to get into the Download Mode using a kind of micro-usb connector, modified with a 301k resistor as showed in this video:
http://www.youtube.com/watch?v=GjDkShT-65Y
Source:http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series
The solution in green will work for you
Thanks,
Spike
Press the Thanks button if this helped
raj3534 said:
download and install pratyush.creed rom using odin and ur phone will be fine again
Click to expand...
Click to collapse
Like i said my phone doesn't boot in downlode menu.odin will not find my port.
any other suggestion....................please
spike1902 said:
Bricked Screen (A.K.A. phone-!-pc or Black Screen of Death)
To recover from this problem, you'll need to get into the Download Mode.
Black Screen of Death:A fully bricked phone will not boot, or display the charging logo when connected to a USB charger. This presently cannot be recovered from any recovery attempt, it will require the phone to be sent back to Samsung and be serviced.
This screen does not always mean your phone is bricked. If you have a hardware locked vibrant, maybe, however, if your phone is not hardware locked, unplug the USB cable from the phone, Hold down Vol UP+Vol Down+Power, the screen will flash black, continue holding down all 3 buttons, you will see the "phone--!--PC" screen again, continue holding all 3 buttons, the screen will flash black again, release the power button only. This will put you into Download Mode.
If this does not work, open odin. Then connect your usb cable to your phone and computer. While the USB is plugged in and Odin running press and hold volume down + Home + Power. Once the black screen comes (flashes) release the Power Button. It should get into download mode.
Additionally it is possible to get into the Download Mode using a kind of micro-usb connector, modified with a 301k resistor as showed in this video:
http://www.youtube.com/watch?v=GjDkShT-65Y
Source:http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series
The solution in green will work for you
Thanks,
Spike
Press the Thanks button if this helped
Click to expand...
Click to collapse
i have gone though this thread.................this wont help in my case.but thanx for reply
And my S5670 is Death
I have one problem. The phone do not want to enter in download mode or recovery, and the screen is always black and don't vibrating.
I was flashing it and somewhere it block and after that it do not start.
I connected to PC and when i press:
- Home + Power don't enter in recovery mode and the PC don't see it.
- Volume Down + Home + Power don't enter in download mode and PC don't see it
- Volume Up + Home + Power the Odin and PC was saw it and installed the driver for USB, modem and serial. But when i trying to install the ROM it block at "setting connection"
I will try and with the modified resistor but when i will be home.
If you are any suggestion or another software or u want to try something i am in the mood to try all. I buy the phone for testing
If i find something else i will post.
antsmaster said:
I have one problem. The phone do not want to enter in download mode or recovery, and the screen is always black and don't vibrating.
I was flashing it and somewhere it block and after that it do not start.
I connected to PC and when i press:
- Home + Power don't enter in recovery mode and the PC don't see it.
- Volume Down + Home + Power don't enter in download mode and PC don't see it
- Volume Up + Home + Power the Odin and PC was saw it and installed the driver for USB, modem and serial. But when i trying to install the ROM it block at "setting connection"
I will try and with the modified resistor but when i will be home.
If you are any suggestion or another software or u want to try something i am in the mood to try all. I buy the phone for testing
If i find something else i will post.
Click to expand...
Click to collapse
I am facing the same problem when i press
- Volume Up + Home + Power the Odin and PC was saw it and installed the driver for USB, modem and serial. But when i trying to install the ROM it block at "setting connection"
Do i Need to goto customer care...............is it the final option....................
I talked to someone and he said to pres hold 3 buttons Vol Down + Home + power then insert battery and after that should appear the Download mode. I'm not have the phone whit me but i will try at home. if u succeed that and bring to life your phone let me know
i already tried that,it dosen't seems to work.
Just flash it again via odin with any firm or rom n ur phone will be fine....
just flash it properly....
thats it..
rajrocks said:
Just flash it again via odin with any firm or rom n ur phone will be fine....
just flash it properly....
thats it..
Click to expand...
Click to collapse
i think u have not gone through all the above posts......................i made this clear that my phone is not booting in download menu
vol down+home+power <----this combo keys are not working.
Anyways thank u for reply.............
stuck on flashing.........................
when i pressed vol up+home+power,the port was found by odin but it dose not start flashing
I try and schema whit modified resistor but nothing. i measured the level of battery it was at 2,4 V after some seconds it down to 0. Maybe it the battery? i charge all the night and next day i put on USB on PC all the day before it die. Maybe i broke the battery and no phone?
antsmaster said:
I try and schema whit modified resistor but nothing. i measured the level of battery it was at 2,4 V after some seconds it down to 0. Maybe it the battery? i charge all the night and next day i put on USB on PC all the day before it die. Maybe i broke the battery and no phone?
Click to expand...
Click to collapse
i dont think battery is problem in my case.i have checked my handset by replacing battery to.
Now i think service center is the last option.i'll visit there latest by tommorow.
If you send it to the service, please after they send back to you the phone, post what they do to the phone (change motherboard or change another piece or just flash it) Thanks.
antsmaster said:
If you send it to the service, please after they send back to you the phone, post what they do to the phone (change motherboard or change another piece or just flash it) Thanks.
Click to expand...
Click to collapse
i changed my decision and visited service center today instead of tomorrow. when i handovered handset to them they inspected the handset i front of me. they disassembled handset gone through it.finally they told me that "we will try to resolve your problem with software, and the problem is not resolved then they will change(replace) the board.
lets see what they will do.i'll inform u what they did to my handset..............................
I think u need to go to customer care. (even i bricked my phone once...) but never ever accept that uve rooted ur phone... Thats wat i did... and i got my phone repaired without any further issues!
Sent from my GT-S5670 using XDA App
hi every one.......i saw this post now...........i too faced this problem.......its a hardware problem.....i took my mobile to service center they changed the mother board.......a preadvice never ever try anything with rom manager.....its the main culprit......
used rom manager without any problem with my previous phone.......didn't face any problem......but i didn't know that CMD is currently not working with fit.........
Ok. I bought this Galaxy Tab 2 7.0 from a friend for cheap because I thought I could fix it, but I'm running out of options. It's in a boot loop, but an abnormal boot loop. If it's unplugged, It will do the splash screen (Samsung) boot loop. If it's plugged in, either into the wall or into my computer via usb, it will do a battery (charging) boot loop. It's kinda weird. I used to have an Epic 4G and it happened damn near all the time, without the battery loop, but it would charge normally.
I haven't successfully gotten it to boot into Download mode.
If any of you have come across this issue, please feel free to help me out.
I also attached a picture of me attempting to put it in download mode. It reboots if I hit either VOL up or VOL down.
Thanks
extasy88 said:
Ok. I bought this Galaxy Tab 2 7.0 from a friend for cheap because I thought I could fix it, but I'm running out of options. It's in a boot loop, but an abnormal boot loop. If it's unplugged, It will do the splash screen (Samsung) boot loop. If it's plugged in, either into the wall or into my computer via usb, it will do a battery (charging) boot loop. It's kinda weird. I used to have an Epic 4G and it happened damn near all the time, without the battery loop, but it would charge normally.
I haven't successfully gotten it to boot into Download mode.
If any of you have come across this issue, please feel free to help me out.
I also attached a picture of me attempting to put it in download mode. It reboots if I hit either VOL up or VOL down.
Thanks
Click to expand...
Click to collapse
Can you get into recovery? Also, have you tried unplugging the charging cable and getting into download mode with the cable unplugged?
I'm not sure how to get into recovery. With it unplugged, all I have to do hold the VOL Down physical button and ti will take me to a "are you sure you want to put the device into download mode screen". I apologize. I'm not to familiar with this device.
Edit: After I get to the screen where it asks me if i want to go into download mode, it reboots within 5-10 seconds, no matter which button I press
extasy88 said:
I'm not sure how to get into recovery. With it unplugged, all I have to do hold the VOL Down physical button and ti will take me to a "are you sure you want to put the device into download mode screen". I apologize. I'm not to familiar with this device.
Click to expand...
Click to collapse
Hold power and Volume up (volume button closest to the power button) until the tab shuts off and reboots itself and then you can let go of both buttons. If it works, try doing a factory reset. Was this tablet rooted (or have a custom rom installed) in the past?
p3113owner said:
Hold power and Volkume up (volume button closest to the power button) until the tab shuts off and reboots itself and then you can let go of both buttons. If it works, try doing a factory reset. Was this tablet rooted (or have a custom rom installed) in the past?
Click to expand...
Click to collapse
As far as I know it's been on Stock. My GTab ignores me holding the Power and Volume up keys at the same time and keeps the boot loop going strong.
extasy88 said:
As far as I know it's been on Stock. My GTab ignores me holding the Power and Volume up keys at the same time and keeps the boot loop going strong.
Click to expand...
Click to collapse
Then I guess you can (and need) to send it in for warranty service (or replacement).
p3113owner said:
Then I guess you can (and need) to send it in for warranty service (or replacement).
Click to expand...
Click to collapse
No, his device is fine.
If your device bricked, but still showing Gtab2 logo on it, it's still fine. You need to flash to stock 4.03 rom via ODIN. (Not clockworkmod)
Warranty won't work if you have flashed custom ROM before.
Rotundjere said:
No, his device is fine.
If your device bricked, but still showing Gtab2 logo on it, it's still fine. You need to flash to stock 4.03 rom via ODIN. (Not clockworkmod)
Warranty won't work if you have flashed custom ROM before.
Click to expand...
Click to collapse
He needs to be able to get into Download Mode to use Odin. He stated that he can't. When he tried to continue into download mode by pressing volume up (vol. button closes to power button) the tablet reboots. It needs warranty service.
Experiments:
Power off the tab completely and charge completely and press power +volume up for 10 seconds then release, also try to power off and press power+ volume down for 10 seconds then release do you see any screens
If it says do you want to enter download mode or so press volume up and see if you could see (downloading) try also the same with volume down instead of up
Try to connect to computer do you see any messages indicating connections
Also try to connect to kies and try restore or recover firmware from options of kies
You said it reboots after 5 to 10 seconds so try to open odin and try to go to download mode and when you press volume up try as quickly as possible to connect tab to pc while odin is open
Sent from my GT-P5100 using xda app-developers app
p3113owner said:
He needs to be able to get into Download Mode to use Odin. He stated that he can't. When he tried to continue into download mode by pressing volume up (vol. button closes to power button) the tablet reboots. It needs warranty service.
Click to expand...
Click to collapse
There's other method by using OpenRecovery (OR), by putting OR on external SdCard,
but it seems the OR for Gtab2 is not developed yet -__-
So, been running CM10 for a long time on tab. Decided to go back to stock, and downloaded the JB stock rom. Flashed via ODIN. Everything seemed to go OK, except that after the flash the screen went black for ages, and didn't reboot. So I hard powered it off. Probably what did it, but it wasn't going anywhere for about 15 minutes, so figured it was the next step.
Now, I get the battery charging icon. The system goes through the Galaxy Tab 2 7.0 white logo, the swirling then glowing Samsung logo, and then loops through that forever.
It wouldn't be such a problem if I could back into ODIN and do another flash, but I can't get into download mode (normally I do it via adb but that isn't working since there is no USB connection at all). Tried all combinations, power/up, power/down etc. It just boot loops as above. I'm pretty sure I bricked it, but just wanted some confirmation.
Been doing this on and off for a long time, and it's the first time I've ever got stuck like this.
Thanks in advance.
Plug USB charger, your device will boot into charge mode. From charge mode you can boot into recovery by keep holding VOLUME UP button and than press POWER button. Clear data and cache in recovery, reboot.
ketut.kumajaya said:
Plug USB charger, your device will boot into charge mode. From charge mode you can boot into recovery by keep holding VOLUME UP button and than press POWER button. Clear data and cache in recovery, reboot.
Click to expand...
Click to collapse
Thanks, but I tried all combinations of Power/Volume UP and Power/Volume DOWN, it just goes through a normal boot cycle until it starts looping.
I guess it's possible I'm not using the right timing. I'm assuming that you hold Volume UP or DOWN and then press and hold Power until the screen goes black, and then release? I've done it like that many times, and also continued to hold everything down as the logo appears, and then system goes back to the battery charging icon as if it powers off again. I sound like such a noob when I type stuff like that!
I saw ODIN successfully write system.img, boot.img, and recovery.img, so I'm thinking any CWM recovery I had on there is toast.
sl0ttedpig said:
Thanks, but I tried all combinations of Power/Volume UP and Power/Volume DOWN, it just goes through a normal boot cycle until it starts looping.
I guess it's possible I'm not using the right timing. I'm assuming that you hold Volume UP or DOWN and then press and hold Power until the screen goes black, and then release? I've done it like that many times, and also continued to hold everything down as the logo appears, and then system goes back to the battery charging icon as if it powers off again. I sound like such a noob when I type stuff like that!
I saw ODIN successfully write system.img, boot.img, and recovery.img, so I'm thinking any CWM recovery I had on there is toast.
Click to expand...
Click to collapse
You must pull usb cable before start.
You can try to re-flash.
tuxafgmur said:
You must pull usb cable before start.
You can try to re-flash.
Click to expand...
Click to collapse
Well, don't I feel like the idiot!
How did I not think to disconnect the USB before trying this? tuxafgmur, your first "Thanks" has been registered, I've got it from here!
P.S. Welcome to the forum!
it sounds strange. never heard of such a strange boot problem. anyway it could be that while transferring boot.img it became damaged due to some error. i know you probably tryed but you may try and connect it to linux or mac os x in order to check if you could retrive more data about the tab. for example the mac could find if it is totally corrupted. normally when i plug my samsung devices it ask me to add the samsung-modem also if they are turned off. meybe if it happens the same to you you can try to adb fastboot it also if i doubt myself about it working, but give it a shot
i hope my bad english is not preventing you to understand what i'm saying!
give us new feedback!