Stop Hal9k V5 upgrade message - MTCD Android Head Units Q&A

Hi
I have Hal9k V4 installed on my old Xtrons unit, almost every time I turn my car on the HU boots up and displays a message in Chrome saying V5 is available.
I can't access the hal9k.ru website so I assume it is being blocked in the UK so I don't think I could upgrade even if I wanted to
How do I stop the upgrade notification launching?
Thank you

#3,102

Pavel-71 said:
#3,102
Click to expand...
Click to collapse
You star! I probably would not have found that in a million searches!

Revert to factory firmware. There's not much to be had with this modded rom anyway.

marchnz said:
Revert to factory firmware. There's not much to be had with this modded rom anyway.
Click to expand...
Click to collapse
Xtrons don’t have a download page so it does involve much jumping through hoops with their support people to get the oem firmware which was Android 8 iirc.
The Hal mod provided one important thing that oem does not, security.
I can set a pin and enable the Lock Screen. I hate the fact that most oem units have zero security.
I did try a few Lock Screen apps but all seemed flawed and one never unlocked! Which was fun getting back in again.

Related

Seicane Android 9 won't update time after turn off engine

Hello all I need help!
Just bought a seicane H286 MTCE_HF_V3.07_1 9" android 9 everything looks good except for the clock. everytime I turn off the engine and the time is 2:15pm, when I turn the engine back on 30mins or however long later the clock is starting at 2:15pm and counting. I toggled update time with GPS on/off, I toggled update with carrier on/off but nothing work. The only time it's update the time with GPS is when I reset the unit. really frustrating with tech support they keep insisting that the unit is automatically update time with gps! If anyone have any solution please help. thank you.
Yes, this is a known issue, search forums for details on update or contact reseller for support/update.
hello, even my autoradio (wondefoo) rh3368 mtce_cz, cpu octacore cortex-a53 @ 1.5 android 9 has your same problem ... surely there is a software bug, the seller told me that he will send me an update. .. ps to the most expert: is it possible to downgrade from android 9 to 8 without risking ?
ilfn143 said:
Hello all I need help!
Just bought a seicane H286 MTCE_HF_V3.07_1 9" android 9 everything looks good except for the clock. everytime I turn off the engine and the time is 2:15pm, when I turn the engine back on 30mins or however long later the clock is starting at 2:15pm and counting. I toggled update time with GPS on/off, I toggled update with carrier on/off but nothing work. The only time it's update the time with GPS is when I reset the unit. really frustrating with tech support they keep insisting that the unit is automatically update time with gps! If anyone have any solution please help. thank you.
Click to expand...
Click to collapse
I recently purchased a 10.1 Seicane H2038 rk3368 unit that seems to be using the same MTCE_HF_V3.07_1 firmware. I also had an issue with the time being incorrect when returning from sleep. I was able to correct the issue by updating the android OS to the latest available (in the Daisata updates thread) HA_px5_9.0_ota(20190521) - please note that that this performed a data reset when applying.
There appears to be a newer PX5 HA_px5_9.0_ota(20190528) firmware posted now that I have not tested, but I assume that should work as well:
https://forum.xda-developers.com/an...asaita-mcu-updates-rockchip-px5-octa-t3575155
I did not upgrade the MCU firmware.
If I know how to root it I can install clocksync and have it automatically sync the clock to gps signal
ilfn143 said:
If I know how to root it I can install clocksync and have it automatically sync the clock to gps signal
Click to expand...
Click to collapse
Or read the second post....
ilfn143 said:
Hello all I need help!
Just bought a seicane H286 MTCE_HF_V3.07_1 9" android 9 everything looks good except for the clock. everytime I turn off the engine and the time is 2:15pm, when I turn the engine back on 30mins or however long later the clock is starting at 2:15pm and counting. I toggled update time with GPS on/off, I toggled update with carrier on/off but nothing work. The only time it's update the time with GPS is when I reset the unit. really frustrating with tech support they keep insisting that the unit is automatically update time with gps! If anyone have any solution please help. thank you.
Click to expand...
Click to collapse
yesterday I installed the version ha_px5_9_ota and the problem of updating the timetable has been solved, the only problem is that as equalization power and audio volume is less than the original rom.
I solved it by rooting it and using tasker. What I found out was whenever I toggle location on and off the timeupdate to gps time, so I used tasker to toggle it.
First I rooted by using adb method found here: https://forum.xda-developers.com/an...5-mtcd-e-head-unit-discussion-thread-t3734189 (very helpful to watch the youtube video)
be sure to install hacker's keyboard from play store and use notepad++ on your pc. not sure why regular keyboard didn't work in terminal emulator. I had to root twice for it to work.
install tasker, in profile I set "Display State" to "on" so every time I turn on the car it'll run the task. In task I set it to wait 5 seconds, turn off location, wait a second and turn it back on.
go back to adb on pc and run command: adb shell pm grant net.dinglisch.android.taskerm android.permission.WRITE_SECURE_SETTINGS
that's it! now whenever I turn on the car it'll take a couple seconds to set the correct time.
hello, I have finished configuring everything and I must say that I am very satisfied with this version, if I can afford to give you some advice ... try installing it also because it seems better to receive gps satellites and do not need other applications to update the 'schedule.
My hu has Carplay built in and don’t want to risk it with a new rom
would it be the carplay?
mrt.angelo69 said:
would it be the carplay?
Click to expand...
Click to collapse
Apple Carplay
ilfn143 said:
First I rooted by using adb method found here: https://forum.xda-developers.com/an...5-mtcd-e-head-unit-discussion-thread-t3734189
Click to expand...
Click to collapse
Which method exactly?
kebul said:
Which method exactly?
Click to expand...
Click to collapse
Post #3
Any body have any version of mtce_hf plz
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk
I have a seicane radio in my ram truck, everything works well but I can't change the balance or fader, any ideas on how to correct this?
Sent from my VS996 using Tapatalk
moeduss said:
I have a seicane radio in my ram truck, everything works well but I can't change the balance or fader, any ideas on how to correct this?
Click to expand...
Click to collapse
What version of Android?
C75 said:
What version of Android?
Click to expand...
Click to collapse
Android 8
Sent from my VS996 using Tapatalk
moeduss said:
Android 8
Click to expand...
Click to collapse
Try installing this app on you HU and see if it works for you.
https://play.google.com/store/apps/details?id=jp.pioneer.mle.soundtune

Dasaita PX6

Ok,
So I got a on some recommendations here.
now what? Are there any custom roms I can use?
I would recommend read trough the forums...
And no, there are no modded Android 9 Roms at the moment.
You have to wait for Hal9k_ and Malaysk to come out with one when they are done.
LinkseD said:
I would recommend read trough the forums...
And no, there are no modded Android 9 Roms at the moment.
You have to wait for Hal9k_ and Malaysk to come out with one when they are done.
Click to expand...
Click to collapse
I've spent hours on the forums but there is so much out there its hard to get a handle on. the last unit I had was a nu3001 and was a bit more straight forward.
I'm not sure I care about android 9 if there is a ROM I can put on mine that is android 8 or whatever I don't care as long as it de-china-fied. I'll continue to look but was hoping for a quicker answer as I'm about to pull the trigger on buttoning up the car with wiring and dash....
Thanks!
Stormbringer! said:
I've spent hours on the forums but there is so much out there its hard to get a handle on. the last unit I had was a nu3001 and was a bit more straight forward.
I'm not sure I care about android 9 if there is a ROM I can put on mine that is android 8 or whatever I don't care as long as it de-china-fied. I'll continue to look but was hoping for a quicker answer as I'm about to pull the trigger on buttoning up the car with wiring and dash....
Thanks!
Click to expand...
Click to collapse
Your px6 came with android 9 anyway. There is no custom roms for px6 at the moment. With that said, android 9 is what I'm running (px5) and has been the most stable out of any modded ROM available from Hal9k or anyone else. You'll need to wait before a modded release is issued . They are being worked on.
For the time being, you could install FCC Launcher for A9. There's a thread in the forums here.
Sent from my SM-N920W8 using Tapatalk
Furthermore you could root your unit aswell. Even it is just possible by using SuperSu at the moment with Android 9.
Youll find the guides in the forums.
i have orderd one to, same as in first post.
can anyone say if tomtom or tomtom nds is working on this unit?
geldorf said:
i have orderd one to, same as in first post.
can anyone say if tomtom or tomtom nds is working on this unit?
Click to expand...
Click to collapse
I have the Dasita max6 as well, and can confirm: TomTom works perfectly.
S1W-brn said:
I have the Dasita max6 as well, and can confirm: TomTom works perfectly.
Click to expand...
Click to collapse
thanks.. yours is also px6 processor?
Yes, latest version px6
My Dasaita Px6 head unit has been working flawlessly for a little bit less than a month aside from a few disconnects with Android Auto.
However, today my head unit crashed 2x. Each time I heard a speaker popping distortion noise for a second and then the head unit restarted.
The only app that was running was Spotify with the unit connected to my phone's hot spot. Weather was about 60F so it wasn't a very hot day.
Has anyone encountered this before and if so, do you know what might be causing it?
rubberchickenmob said:
My Dasaita Px6 head unit has been working flawlessly for a little bit less than a month aside from a few disconnects with Android Auto.
However, today my head unit crashed 2x. Each time I heard a speaker popping distortion noise for a second and then the head unit restarted.
The only app that was running was Spotify with the unit connected to my phone's hot spot. Weather was about 60F so it wasn't a very hot day.
Has anyone encountered this before and if so, do you know what might be causing it?
Click to expand...
Click to collapse
could be a wiring issue or might need to factory reset the unit. I think everyone should factory reset as soon as they get the unit anyway.
lennylen said:
Your px6 came with android 9 anyway. There is no custom roms for px6 at the moment. With that said, android 9 is what I'm running (px5) and has been the most stable out of any modded ROM available from Hal9k or anyone else. You'll need to wait before a modded release is issued . They are being worked on.
For the time being, you could install FCC Launcher for A9. There's a thread in the forums here.
Sent from my SM-N920W8 using Tapatalk
Click to expand...
Click to collapse
I'm having the same issue and was blaming Malaysk mod for this...
Have you solved the issue? I will go back to stock and factory reset everything next week (is there a MCU factory reset option?).
I too have experienced the same exact problem and it happens once or twice a day. The UI freezes for a few seconds then there is a loud crackling sound coming from the speakers for another few seconds followed by a crash and reboot. It appears to happen randomly when I'm interacting with apps and more than likely is not heat related since it's been only a few degrees above freezing here and has happened only a few minutes after turning on my car. I've also had freezes where the UI and all buttons stop working but the radio keeps playing and only a forced reboot fixes it. I'm on Malaysk full mod and plan to go back to stock to do some troubleshooting and see if it's hardware or software-related.
jwallsuva said:
I too have experienced the same exact problem and it happens once or twice a day. The UI freezes for a few seconds then there is a loud crackling sound coming from the speakers for another few seconds followed by a crash and reboot. It appears to happen randomly when I'm interacting with apps and more than likely is not heat related since it's been only a few degrees above freezing here and has happened only a few minutes after turning on my car. I've also had freezes where the UI and all buttons stop working but the radio keeps playing and only a forced reboot fixes it. I'm on Malaysk full mod and plan to go back to stock to do some troubleshooting and see if it's hardware or software-related.
Click to expand...
Click to collapse
I tried going back to stock and changing many different MCU versions with the same exact issues you are describing: freezing or rebooting in the first few minutes after starting the car.
Today I had another new issue: I had one of the described freezes but after shutting down the car the display of Dasaita went black but the touch buttons remained on (LEDs on). I had to disassemble the HU to unplug the power cable... This is not a small bug anymore, this is a huge issue, I am trying to contact support with no answers. Did you find a solution or have any suggestion?
Do you have stock recovery? Do you know how to install stock recovery?
I also would like to factory reset MCU setting but I have no idea how to do it. Did you change any setting in factory settings menu? I'm worried that it could be something there.
The Android Attorney said:
could be a wiring issue or might need to factory reset the unit. I think everyone should factory reset as soon as they get the unit anyway.
Click to expand...
Click to collapse
I have the same issue sometimes my HU crashes with popping sound. I blame MCU 3.37 but i am not sure. Maybe i should re-update it without cfg settings files because i flashed it with exported MCU settings and put the cfg file next to the img file when i flashed the new MCU
matrixx1 said:
I have the same issue sometimes my HU crashes with popping sound. I blame MCU 3.37 but i am not sure. Maybe i should re-update it without cfg settings files because i flashed it with exported MCU settings and put the cfg file next to the img file when i flashed the new MCU
Click to expand...
Click to collapse
Where do you get the cfg file? I always flashed MCU without cfg file but maybe we could get a cfg file from a device with no issues and flash it alongside the MCU.
Frankk said:
Where do you get the cfg file? I always flashed MCU without cfg file but maybe we could get a cfg file from a device with no issues and flash it alongside the MCU.
Click to expand...
Click to collapse
You create it for your unit from factory config menu. Or document factory settings before updating MCU, right. Perhaps search for more info or read wiki.
marchnz said:
You create it for your unit from factory config menu. Or document factory settings before updating MCU, right. Perhaps search for more info or read wiki.
Click to expand...
Click to collapse
Thank you, I'm going to read it, but I assume that the cfg file you create from the factory settings menu is a backup of your current configuration, not a real clean factory configuration, am I right?
Frankk said:
Thank you, I'm going to read it, but I assume that the cfg file you create from the factory settings menu is a backup of your current configuration, not a real clean factory configuration, am I right?
Click to expand...
Click to collapse
Yes but actually the only thing i changed is SWC settings for Canbus so i can configure it manually.
matrixx1 said:
Yes but actually the only thing i changed is SWC settings for Canbus so i can configure it manually.
Click to expand...
Click to collapse
You have a Dasaita MAX6, right?
If yes, can you send me a dmcu.cfg file generated with your device?
If you changed only that setting it is pratically a stock configuration, I think I changed something more...
I'm not sure if it is the normal behaviour but when I update the MCU or if I wipe data from recovery or if I do a factory reset from system settings, the MCU settings are never changed. My custom configuration is never overwritten or deleted.
Thank you,
Francesco Comi

Xz3 - 52.1.A.0.672 RU version

Xperia XZ3 (H9493) - 52.1.A.0.672 - RU version
Notification seek bar bug - STILL!!! – If I’m playing media through chrome, soundcloud or another app, the notification seek bar does not work in most situations. This has been a bug since the initial Android 10 roll out and I’m still shocked that we’re still going through this.
Swipe up from the lock screen – I’ve noticed this since the update from Android 9 to 10. It used to be a quick flick of the thumb where I could go from the notifications on the lock screen to the security pattern. Now since the A10 update, I can’t do that anymore. It is a longer swipe, more exaggerated swipe to get to the security options. It was easier with 1 hand before and it needs to go back to whatever it was in Android 9
Camera – Still gives error unknown error. It’s MUCH EASIER to fix than the first and second android 10 releases but it still shouldn’t be like this. It’s at the point where I don’t know if it’s an actual software or hardware problem. And with everything that’s going on, I probably won’t be able to confirm for the next 6 months. I'll probably end up wasting$200 fixing the hardware, that was really a software issue all along.
Fingerprint – Good, I believe either at or close to Android 9 speed
Battery – Good
Networking issues – I believe better than the last update. It seems good so far so
No idea why the software version has to be in the notification quick settings. That doesn’t need to be there. It’s out of place/doesn't add value by being there
I am so frustrated by Sony. They’re taking steps to fix this but damn you should have been on the ball. I do a clean install each update because I don't trust Sony to do this correctly.
This phone is like the Renault Formula 1 team. It's a great product and each update is a step further but holy **** you all should have been a lot farther along by now. Now Mclaren (One Plus) is starting to pass you.
Edit: I forgot to add this earlier. I found a bug by random. In dark mode, About phone -> Emergency Information, the notification bar text is black. So you've got a dark screen with black text.
I still have not received an air update on my H9493. my software version is still 532.
Wa1ker_ru said:
I still have not received an air update on my H9493. my software version is still 532.
Click to expand...
Click to collapse
I too haven't received an update since December on my xz3 h9493 my version is 532
kaderzaim said:
I too haven't received an update since December on my xz3 h9493 my version is 532
Click to expand...
Click to collapse
In the morning I received an update with the numbers 618
Wa1ker_ru said:
In the morning I received an update with the numbers 618
Click to expand...
Click to collapse
I too received it this morning and I'm still waiting for the 672
supervf1s said:
Xperia XZ3 (H9493) - 52.1.A.0.672 - RU version
Notification seek bar bug - STILL!!! – If I’m playing media through chrome, soundcloud or another app, the notification seek bar does not work in most situations. This has been a bug since the initial Android 10 roll out and I’m still shocked that we’re still going through this.
Swipe up from the lock screen – I’ve noticed this since the update from Android 9 to 10. It used to be a quick flick of the thumb where I could go from the notifications on the lock screen to the security pattern. Now since the A10 update, I can’t do that anymore. It is a longer swipe, more exaggerated swipe to get to the security options. It was easier with 1 hand before and it needs to go back to whatever it was in Android 9
Camera – Still gives error unknown error. It’s MUCH EASIER to fix than the first and second android 10 releases but it still shouldn’t be like this. It’s at the point where I don’t know if it’s an actual software or hardware problem. And with everything that’s going on, I probably won’t be able to confirm for the next 6 months. I'll probably end up wasting$200 fixing the hardware, that was really a software issue all along.
Fingerprint – Good, I believe either at or close to Android 9 speed
Battery – Good
Networking issues – I believe better than the last update. It seems good so far so
No idea why the software version has to be in the notification quick settings. That doesn’t need to be there. It’s out of place/doesn't add value by being there
I am so frustrated by Sony. They’re taking steps to fix this but damn you should have been on the ball. I do a clean install each update because I don't trust Sony to do this correctly.
This phone is like the Renault Formula 1 team. It's a great product and each update is a step further but holy **** you all should have been a lot farther along by now. Now Mclaren (One Plus) is starting to pass you.
Edit: I forgot to add this earlier. I found a bug by random. In dark mode, About phone -> Emergency Information, the notification bar text is black. So you've got a dark screen with black text.
Click to expand...
Click to collapse
Same here like a attached photo
Camera unknown error most of the time
Very sometime good again .but I can't
find anyway to slove that problem.I tried to clear cached clear data forced stop disabled
and restart still have that unknown error
After that I flashed stock ftf 10.0
again with full wiped and then repair software with PC suited also wasting time
Please give me any ideas guys thz
PS Xz3 H9493 .618
kokokmt said:
Same here like a attached photo
Camera unknown error most of the time
Very sometime good again .but I can't
find anyway to slove that problem.I tried to clear cached clear data forced stop disabled
and restart still have that unknown error
After that I flashed stock ftf 10.0
again with full wiped and then repair software with PC suited also wasting time
Please give me any ideas guys thz
PS Xz3 H9493 .618
Click to expand...
Click to collapse
It's possible it's a hardware problem. It happens to me too but it was worse with the initial A10 update. My understanding is if you squeeze beside the camera when turning the phone, it can solve the issue. This is because it's a possible loose ribbon.
The initial A10 release was terrible so flash up to .672 and it may fix the problem (if it's a software issue)
supervf1s said:
It's possible it's a hardware problem. It happens to me too but it was worse with the initial A10 update. My understanding is if you squeeze beside the camera when turning the phone, it can solve the issue. This is because it's a possible loose ribbon.
The initial A10 release was terrible so flash up to .672 and it may fix the problem (if it's a software issue)
Click to expand...
Click to collapse
I really appreciated your reply I'm so confused that problem is hardware or not.Coz I got back my camera very sometime but after few days
It happened again ??? and also I found
another user reported that bugs at Sony'
Discussion and any other places when they upgraded to A10.Another problem is
My device is H9394 Dual So latest ver
Of A10 is .618 . Ver 672 is not yet for my
Region thz
PS Now I tried to downgraded android 9
If Downgrade is fix this problem I will
let you know
kokokmt said:
I really appreciated your reply I'm so confused that problem is hardware or not.Coz I got back my camera very sometime but after few days
It happened again and also I found
another user reported that bugs at Sony'
Discussion and any other places when they upgraded to A10.Another problem is
My device is H9394 Dual So latest ver
Of A10 is .618 . Ver 672 is not yet for my
Region thz
PS Now I tried to downgraded android 9
If Downgrade is fix this problem I will
let you know
Click to expand...
Click to collapse
Hey I am also facing this problem on my xz3 dual. Failed to restart the camera is consistently occuring in the past few weeks but restarting the phone worked then. But now its been almost 2 days, camera app says unknown error, I tried everything mentioned above but still unable to resolve the issue. Kindly let me know if downgrading the firmware resolves the issue.
Thank you
Camera unknown error issue
Splinter07 said:
Hey I am also facing this problem on my xz3 dual. Failed to restart the camera is consistently occuring in the past few weeks but restarting the phone worked then. But now its been almost 2 days, camera app says unknown error, I tried everything mentioned above but still unable to resolve the issue. Kindly let me know if downgrading the firmware resolves the issue.
Thank you
Click to expand...
Click to collapse
Of course
I am waiting to downgrade 9
But it was delay coz of covid 19
I can not go to any service center.
Because I can't downgrade it myself .
I hope that problem is software issue .
After downgrade to android 9
That problem can fix or not I will
let you know
Thank you
It is not a software problem for my device
Splinter07 said:
Hey I am also facing this problem on my xz3 dual. Failed to restart the camera is consistently occuring in the past few weeks but restarting the phone worked then. But now its been almost 2 days, camera app says unknown error, I tried everything mentioned above but still unable to resolve the issue. Kindly let me know if downgrading the firmware resolves the issue.
Thank you
Click to expand...
Click to collapse
Today I downgrade my Xz3 H9493 to android
9 but my camera didn't get back.So I decided
to check hardware.that is really sad.
Coz I have to take out all water proof
Seal from my back cover .After that I found
my Camera connector is loose.That's why
occurring unknowm error and after
2 or 3 days is good again.At last that is
not a software error at all.
I got error while enabling tethering
Anyone else?
I'm having signal issues. Dropping connection all the time. Latest firmware hurt this badly.
Same SIM on a Samsung A30S on android 9 works fine.
Hello guys. I need your help finding 52.1.A.0.618 for H9436

Unusual unresponsive screen lag

Hi! Ive recently been facing problems with my phone screen being unresponsive. I have search throughout the entire forums. However none of threads have similar screen problems like the one I'm facing right now.
https://youtu.be/gpSToymc3CI (Sorry i'm new to the forums so I cant insert link)
If you look at the video closely, my slides are not registered occasionally and it jumps from place to place. This problem appears and disappears randomly (It worsens when there are multiple fingers on the screen) making me unable to play FPS games like PUBG or COD at times.
Can anyone help explain if this is a software (Ive updated from EMUI 9.1 to 10 but the problem still persists) or hardware issue (probably broken digitiser?)? Thanks!
It must be a hardware issue. How much time do you have it? If the guarantee is still valid, you should send it for service, otherwise you will need to pay a lot for the original screen..
By the way, how did you manage to update to android 10? From what country are you from? When did you receive it?
arvacon said:
It must be a hardware issue. How much time do you have it? If the guarantee is still valid, you should send it for service, otherwise you will need to pay a lot for the original screen..
By the way, how did you manage to update to android 10? From what country are you from? When did you receive it?
Click to expand...
Click to collapse
Hi! Yea I figured out it was an hardware problem and decided to change to another phone. I managed to follow one of the threads in updating my device to emu 10 well ahead of my country (Singapore) which only received it today. You can apparently force proxy update on the global version (EML-L29) with the use of Hisuite proxy.
You can check out the thread here: https://forum.xda-developers.com/huawei-p20/how-to/android10-emui10-update-t4088233/page3

November 2020 security update is now available

Hi,
Just got it
Only 7MB... I don't think it will fix performance errors after several days
By now I highly doubt these updates have ever fixed anything
I'll probably still have to restart my phone every day to keep it snappy.
Yes, at least for me bugs are still here. Made a clean install
Our device is officially abandoned by Xiaomi even though there's still 8 months of security patches for it. They just refuse to fix anything since they updated to Android 10. I had a slight hope but not anymore.
Funny thing, if you use the navigation gesture the icon text is bigger lol
For exemple, in the app drawer it will display "Chro" instead of "Chrome".
If you go back to 2 buttons navigation the display is correct.
Dont know how to fix that without tweaking dpi in dev option...
Wanted to test again the stock version but it's not very good... lol
Could you report if it has been any improvement?
I'm using it second day and RAM management is much better, phone feel more snappy then v11.0.10.0.
Problems with "customize your pixel" and "add another email account" are still present.
exBBoi said:
I'm using it second day and RAM management is much better, phone feel more snappy then v11.0.10.0.
Problems with "customize your pixel" and "add another email account" are still present.
Click to expand...
Click to collapse
I can confirm that, I can see an improvement too. The fingerprint reader also works better.
Unfortunately, the transfer of USB files to the memory card is completely unstable. Sometimes I have to reset my phone to see the changes.
For me, these are the first changes since updating to Android 10. Unfortunately, many things still don't work, for example Volte.
Nico100g said:
I can confirm that, I can see an improvement too. The fingerprint reader also works better.
Unfortunately, the transfer of USB files to the memory card is completely unstable. Sometimes I have to reset my phone to see the changes.
For me, these are the first changes since updating to Android 10. Unfortunately, many things still don't work, for example Volte.
Click to expand...
Click to collapse
Did you try the volte code on phone app ? *#*#86583#*#* disable the carrier check on that.
I did it and volte is working fine. My provider had to activate it on my line
neopbm said:
Did you try the volte code on phone app ? *#*#86583#*#* disable the carrier check on that.
I did it and volte is working fine. My provider had to activate it on my line
Click to expand...
Click to collapse
I tried, Volte in my country stopped working since android 10 update. It worked fine on android 8 and 9. Now I have Volte in options (it's not translated...), it is active and the phone still logs to 3G while talking. Many people have complained about this on the official Xiaomi forum but it has not been corrected. The code *#*# 86583#*#* also gives nothing. In the menu *#*#4636*#*# Volte is active but the phone does not use it.
Nico100g said:
I tried, Volte in my country stopped working since android 10 update. It worked fine on android 8 and 9. Now I have Volte in options (it's not translated...), it is active and the phone still logs to 3G while talking. Many people have complained about this on the official Xiaomi forum but it has not been corrected. The code *#*# 86583#*#* also gives nothing. In the menu *#*#4636*#*# Volte is active but the phone does not use it.
Click to expand...
Click to collapse
Oh ok, so it must be different for some countrys
Is there still problems with ram management?
Maximuous said:
Is there still problems with ram management?
Click to expand...
Click to collapse
Yes. Don't expect a fix any time soon. We're only getting security fixes and that's not a security issue
Battery is draining faster since the update.
Battery seems ok to me. At least the same as before when i was using custom rom.
But i am pretty sure that my battery is dying as i cant get more than 6h of screen on time now, no matter what rom/kernel i use lol
I'm not getting any update. May it be because of unlocked bootloader? I'm still at May security update for now.
c3497605 said:
I'm not getting any update. May it be because of unlocked bootloader? I'm still at May security update for now.
Click to expand...
Click to collapse
Maybe you can try to update manualy : https://forum.xda-developers.com/t/...m-11-0-2-0-to-11-0-14-0.4197727/post-84038155

Categories

Resources