Related
Code:
/*
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
For more info check the main Fly-On Mod thread : here
Index :
-Post 1 : Introduction.
-Post 2 : Download links.
-Post 3 : Changelog.
-Post 4 : Technical info and explications about Tweaking Android.
Introduction :
Hello guys,
After more than two years of the launch of Fly-On Mod, and the very good feedback it received, I decided me and my friend @thetechnologician
to work on a Fly-On app.
The aim is to provide a simplified access to the Mod, while freeing the users from the hassle that comes with installing the Mod.
And so with a simple on the fly switch, you can enable Fly-On tweaks but with an enhanced sense of control as you can enable and disable every single script and part of the mod as you like.
It doesn't come without mentioning that my friend @thetechnologician was the one who worked on the app, while im concentrating on the Fly-On Mod core.
Features
- The ability to control every part of the Mod.
- Simplified access for new users/not willing to flash the Mod through the recovery.
- Booster Mode for better performance and battery life.
- Full memory management/Better multitasking.
- Linux kernel tweaks and improvements for better performance and battery life.
- Less lags for gamers.
- Entropy generator engine used to reduce lags.
- Zipalign apps in "/system" and apps in "/data" every 24 hours which result in less RAM usage.
- Better thermal management and less overheating.
- Sqlite optimizations and faster database access.
- Increased SD Card read-ahead cache to 2048 KB for faster SD card read and write.
- Build.prop tweaks and improvements.
- Cleans log files and tombstones at every boot.
- Many other tweaks for better performance and battery life!
Requirements :
- Android 4.0.x or higher.
- Root.
- At least 10MB of free space at /system .
FAQ : (coming soon)
Credits:
-Thanks to Chainfire for the Superuser Lib.
-Thanks to Jack Palevich for the built-in terminal emulator.
If you liked our App, please rate this thread to 5 stars and press the Thanks button !
Try the latest F.O.M. App here :
Fly-On Mod App 2.0 Alpha 2
Changelog
Fly-On Mod App Alpha 1 : (08/03/2015)
-Initital release
-Supporting 7 scripts from Fly-On
Fly-On Mod App Alpha 2 : (08/07/2015)
-Sqlite optimizer script support
-Toast memory leak fix
-Init.d permissions fix
-fstrim binary support
Fly-On Mod App Alpha 3 : (08/11/2015)
-Removed the "Extract files button" (Process now happens automatically)
-Added full Init.d support
-Added Dns caching script support
-Added Logging engine support
-Changed the Apply changes button from soft reboot to reboot to accomodate loggin engine's dependencies
-Minor other design changes
Fly-On Mod App Alpha 4 : (08/17/2015)
-Added full busybox support and removed its button
-Added internal support for Jack Palevich's terminal emulator for entropy execution
-Removed the "Uninstaller" button (Process now happens automatically)
-Entropy engine support
-Full fly engine support, chopped to 5 different switches, therefore allowing full control over the engine
Fly-On Mod App Beta 1 : (08/21/2015)
-Reworked splash screen with better task management
-Fly-On Mod files updated to match Alpha 8
-Few design changes (Fly-On Engine collapse menu)
-Added OpenVPN Support
-Added tune2fs support
Fly-On Mod App Beta 2 : (08/24/2015)
-tune2fs becomes Ext4 tweaks, restricting the use to only the supported devices
-Added Vm tweaks to the Fly Engine
-Added Entropy monitor bar
-Added Android M support for the Sqlite optimize script
Fly-On Mod App Beta 3 : (08/28/2015)
-Logging dialogs : You can finally view the logs in-app (make sure you reboot after modifying your toggles, otherwise the logs will be empty)
-Expended compatibility by removing the EXT4 mounting restriction The app is fully universal now
-Fixed Entropy toggle bug
-Fully monitered and controlled Entropy engine without requiring the terminal emulator ( you can uninstall the terminal now)
-RAM management defragmentation into 3 scripts
-Tweaks sorted by type
Fly-On Mod App Beta 4 : (09/06/2015)
-Icon overhaul
-Added Booster Mode : Different modes that adapt your phone's performance/battery life ratio to your needs
-Added LMK profiles : New RAM Management profiles that optimizes your phone's multitasking abilities depending on your usage.
-Added description to toggles
-Minor bug fixes
Fly-On Mod App Beta 5 : (09/12/2015)
-Logs bug fixed
-Adblocker bug fixed
-Fixed Xperia Dual Recovery Bug
- Many minor miscellaneous bugs fixed
-Booster Mode fix
-Lmk Profiles fix
Fly-On Mod App Beta 6 : (09/20/2015)
-Fixed Entropy Engine and Ext4 Tweaks Toggles Bug
-Added "Enable All" toggle
-Added a Dark Theme
-Updated Booster Mode to v1.3
-Added Butter Mod : For a smoother User Experience
-Added I/O Scheduler tweaks
Fly-On Mod App 2.0 Alpha1 : (09/29/2015)
-Refreshed materiel design UI !
-Rebuilt from scratch for optimization purposes.
Fly-On Mod App 2.0 Alpha2 : (30/11/2015)
Major bugfix update :
-Fixed root issues related to fragments.
-Fixed force closes related to swiping between fragments.
-Fixed slowdown issues related to the home fragment.
-Root optimisations.
Use:
The Fly-On Mod App serves as a Graphical Interface to the now-famous Fly-On Mod script, which means that you no longer need to flash the latter through recovery since it will evantually be included in every new App release . However, as of the Alpha releases, only select scripts are supported. We now support all of the Fly-On Mod scripts.
How to:
EDIT: The app no longer needs any installable requisites : Just install the apk, toggle the wanted tweaks and click the "apply changes" button. Let the phone reboot and enjoy
Useful Info About Tweaks:
-Fly engine :
As of Beta2: Fly engine comes in 6 different scripts, every script is packed with some useful tweaks aimed to provide a lagfree experience while being battery friendly.
and thus Fly engine's tweaking target is your android's phone core(system+linux kernel), and here are some detailed info :
-Network tweaks : Used to improve overall network speed, by tweaking ipv4, netcore and TCP settings.
-Build.prop tweaks : as you all know the build.prop file is your android handset’s ‘ID card’, thus it controls many of your Android system's settings, tweaking those settings would greatly improve responsiveness as well as battery life.
-Disable sleepers : Disabling I/O scheduler sleepers would improve I/O smoothness.
-Sysctl tweaks : system control tweaks are used to tune virtual machine settings according to your device's RAM amount. Used with the Ram manager, the combo provides a lagfree experience.
-Kernel tweaks : as the name states.
-VM tweaks : more virtual machine tweaks( VM heap size tweak for now).
-I/O tweaks :
-R/W Turbo : Read/Write turbo script increases your SDcard's read-ahead speed, and contains some useful I/O tweaks.
-EXT4 tweak (For devices with EXT4 File system only) : Disables journalism which would improve File system performance.
Ram manager :
-LMK : The Low Memory Killer is a constant debate between more free RAM and more multitasking capabilities as free RAM is actually wasted RAM.
The Low Memory Killer is actually a feature in the Android OS used to improve memory management.
This is an important feature due to the perennial problem of having low free memory causing lagginess and slowness in launching apps. When you have free memory lingering around the number of 40MB or less, the Android OS just lags like hell.
What this would mean is, you would want to tweak the LMK to not have the situation of it having less than 100MB.
The modern Linux machine in the Android ecosystem relies on a mechanism called Low Memory Killer (LMK) to consistently free up RAM. This is due to Android's internal mechanism of caching apps (and never fully exiting them) when you press the back button. This is to enable faster app switching and provide a seamless experience for apps usage model. Android also, by itself will also constantly look for often used apps to cache them for faster app opening. This will happen even before your system fully boots.
Now, when you mention LMK, the most obvious thoughts that come up are minfrees and Out Of Memory (OOM) groupings. Yes, those two are integral parts when it comes to LMK. The issue here is that no one actually mentioned that there are two LMK systems in Android, that being:
+ Linux LMK
+ Android Dalvik VM LMK
-ZRAM : is a Linux kernel feature that provides a form of virtual memory compression. zram increases performance by avoiding paging to disk and using a compressed block device in RAM.
-KSM : Kernel same-page merging lets the system share identical memory pages amongst different processes. The result is obviously an improved multitasking experience.
-Killer : that's a script used to kill media seerver and google play services when battery draining wakelocks occur to improve battery life.
-Cleaner : Cleans /system and /data partitions by deleting many unuseful logs.
-Governor tweaks : Tunes your CPU's governor settings to provide a smoother, yet battery friendly experiece.
-Fstrim : Some Android users suffer from poor performance after some days/weeks of heavy usage. This is due to a well-known TRIM bug affecting these devices, so this lagfixer script is used to fix such a bug.
-Zipalign : is a tweak used to optimize Android application (.apk) files. The purpose is to ensure that all uncompressed data starts with a particular alignment relative to the start of the file. Specifically, it causes all uncompressed data within the .apk, such as images or raw files, to be aligned on 4-byte boundaries. This allows all portions to be accessed directly with mmap() even if they contain binary data with alignment restrictions. The benefit is a reduction in the amount of RAM consumed when running the application.
-SQlite optimizer : Vacuum and Reindex tweaks are used to optimize database of all apps in /data and /system, to achieve better performance.(expect longer boot time when this tweak is enabled)
-DNS caching : There are thousands of DNS servers on the internet, and your smartphone will be querying a lot of them. They start to "talk" to eachother to see if any server has information on the domain you are trying to access. Assuming the site has never been queried before, your request will eventually reach one of the nameservers (the primary source of the information), and the domain will be 'resolved', the IP identified, and your device now knows where the server is and can initiate communication; what about if your device already knows that server, it'll initiate communciation immediatly reducing the lag, that's what DNS caching is all about.
-Entropy engine : This engine can reduce lag by keeping a section of the Android file system (/dev/random) full of random bits so that the system does not have to wait for the file system to generate them.
OpenVPN : https://openvpn.net/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Reserved 5
Launcher restart every time....:crying:
phil_greg2001 said:
Launcher restart every time....:crying:
Click to expand...
Click to collapse
Can you explain a little more?
I'm on KK with my old sgs i9000 and with this mod Novalauncher restart all time.
But with your mod beta 6 it works fine.
phil_greg2001 said:
I'm on KK with my old sgs i9000 and with this mod Novalauncher restart all time.
But with your mod beta 6 it works fine.
Click to expand...
Click to collapse
Would you please specify which tweaks are enabled ?
Sent from my SM-G920F using Tapatalk
All tweaks without openVPN... Maybe I must uninstall beta6 before?
phil_greg2001 said:
All tweaks without openVPN... Maybe I must uninstall beta6 before?
Click to expand...
Click to collapse
Theoretically, the two versions won't cause any conflicts.
Although, you can try uninstalling Beta6, it may help.
Sent from my SM-G920F using Tapatalk
I must delete all files at initd.d to use the apk and fuction?
xn0live said:
I must delete all files at initd.d to use the apk and fuction?
Click to expand...
Click to collapse
I think not. Simply uninstall L_speed (if you're using it). Install FOMA check the options you want & reboot
xn0live said:
I must delete all files at initd.d to use the apk and fuction?
Click to expand...
Click to collapse
mauam said:
I think not. Simply uninstall L_speed (if you're using it). Install FOMA check the options you want & reboot
Click to expand...
Click to collapse
I forget to mention, that before using FOMA you should uninstall any previously used mod or script and clean your init.d directory.
Sent from my SM-G920F using Tapatalk
It this working on android 6.0?
Inviato dal mio Nexus 5 utilizzando Tapatalk
Balino said:
It this working on android 6.0?
Inviato dal mio Nexus 5 utilizzando Tapatalk
Click to expand...
Click to collapse
Yes, all android versions from 4.0 and up are supported.
Sent from my SM-G920F using Tapatalk
i'm use Sony Z3 dual and use 5.0.2 lollipop
when i install fly-on-mod app 2.0 alpha 1, i still can not view log via show logs button and this app usually "has stoping worked".
Please help me to resolve it
UIT_GHOST said:
i'm use Sony Z3 dual and use 5.0.2 lollipop
when i install fly-on-mod app 2.0 alpha 1, i still can not view log via show logs button and this app usually "has stoping worked".
Please help me to resolve it
Click to expand...
Click to collapse
When did it stop working ?
Are you able to view logs using a file manager ?
Sent from my SM-G920F using Tapatalk
slaid480 said:
When did it stop working ?
Are you able to view logs using a file manager ?
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
when i tap to change view in the app, sometimes it has stop worked.
i use ES manager,in folder system/data/FlyOn, it has some log but all log was empty(0 Byte) and folder FlyOn also 0 Byte
SmoothMod Kernel (SMK) for Samsung Galaxy Tab 3 8.0 3G (SM-T311), also may work on WiFi version (SM-T310), all stock and CM ROMs.
Development discontinued, read reason here.
This kernel is developed to give you more smoothness and stability than you can have on stock kernel and others.
Warning. Kernel may work on your device/ROM and may not. For me it works at all ROMs and for many people (on 4PDA.RU forum) it works too. Some people say (or said before kernel worked, this also can be) it doesn't work. So do a kernel backup please before you flash it first time. I've never had boot or usage problems with SMK, but it could be because i'm its developer (though it can not be the reason for that I'm always successfully boot it..). So it seems that our devices of the same model might be different. Be careful as I can not help you.
Features:
- Kernel version updated up to 3.2.26 and keeps updating
- Safe CPU overclock to 1.9 GHz with CPU-Boost kernel driver developed also by myself
- Custom (and only here) governor Smooth that is made to give both good battery saving and absolute smoothness. Uses GPU load and io_wait to additionally increase frequency at the right time.
- Kernel has a custom Android service smkd that controls all its features and provides many tweakable settings that you can change very simply: through terminal command "smkd" (instructions below) or "by hands" at folder "/smk" (like usual linux kernel settings at "/proc/sys/{kernel|vm|net}"). The program is written in C language, not as a script, for performance (shell-scripts are very slow when comparing with optimized C-programs).
- Tweak Menu that can be found if you type 'smkd' in your terminal.
- SmoothnessControl - one of smkd's functions that tries to guarantee UI smoothness to your tablet even if there are very CPU-hungry (but not I/O) apps/programs running like android.process.media and others. By default disabled. To enable, type this: 'su -c "scd --enable"' in terminal emulator. To disable, type 'scd --disable'.
- CPU Undervolt controlled through smkd.
- DynBS program (also developed by me) used by smkd to improve battery saving by 40% and more.
- Boeffla Sound Engine with custom settings, not working with Boeffla Sound Control app because smkd controls them (it's needed because smkd fixes engine's sound effects bug). Settings are stored folder "/smk" in files beginning with "boeffla.".
- Cron scheduler configured from file /sdcard/cron/root.
- All the custom tweakable settings described upper are reloading instantly after you change them or on delete (cron schedule file is also under the same watch).
- Kernel is compiled with optimized HYPER-TOOLCHAIN with gcc version 6.0 and maximally optimized compiler configuration.
Customizing kernel:
There is now nothing that needs to be explained, as customizing is pretty simple! Just type command 'smkd' (without quotes) and go through the menu (by entering appropriate symbols) as you want, changing parameters as you need.
Ask, if you have questions
If you have questions or suggestions about my kernel, feel free to write about that here and I will try to answer.
F.A.Q.:
Q.: Do I need to wipe Dalvik/ART cache before/after flashing this kernel?
A.: It is even not useful to wipe caches because they are used by Android only, not by kernel. So, it's not needed.
Q.: The kernel does not boot! What do I have to do to boot it?
A.: Write a message in this thread providing info about what ROM do you use, what Android version it is and what kernel build (kk/lp/mm) and version you are trying to boot. I will reply to that message and try to fix that problem.
Author: me, igoryan94
Download from Google Drive
Before flashing this kernel please do a backup yours first!
Warning! If you have a Jellybean/Kitkat rom, then download the smoothmod-kernel-kk-... build. If you use Lollipop (CM12), then your build to download will be ...-lp.... If it is a Marshmallow (CM13), then download mm build.
Other choice will cause your device to not be able to boot!
(Sorry for my (maybe )bad english)
Plans:
-
Developing now:
-
Changelogs (old*):
1.2.1/1.2.2:
- Returned possibility to load a profile from command line (command 'smkd --load [name]' or 'smkd ld [name]')
- Added custom setting for apps CPU time, now it has two groups: idle and high.
Idle group gives an app very small amount of CPU time, use for hungry apps that you don't need.
High group grants an app a 95% of all CPU time. Use to speed up some apps or games.
It is all very similar to Greenify and others, excepting that this is not battery saving solution, only to smooth up your Android, as Greenify disables an app and CGroup lowers app's CPU execution time available to it.
- I/O settings fully rebalanced for smoothness for system processes and apps processes
- Also added control group for I/O that does like one for CPU, but for I/O and developed its correct (for Android) behavior.
- Current configuration name in smkd menu now correctly saves and loads after reboot.
- Default LMK level changed to 125
XDA->SMK:
1.2:
- Got a smoother UI with better CGroup tweaking
- In case of some situations smkd will notify user with drawing a small square of some color at the left upper screen edge (portrait orientation). For overheat the color is red. When SmoothnessControl gets to work, color is light blue/cyan. If device's load is too high, the color will be blue.
"Notification" will blink when screen updates because the framebuffer devices are not support this method of screen drawing. But it works for now and I think that it is very useful to know the reasons of device's lags and freezes.
- Menu now immediately reacts to input, instead of pressing some characters and then Enter. Modified all menus that way so the interface is now much better.
- When exiting menu, parameters are automatically saved to default profile. No need to care about it anymore...
- Added Quick settings also to RAM and I/O
- Main menu: moved all "p)" menu elements to main menu level, it is quicker to access now
- Some more Quick settings options added
- Added Quick settings to my menu templates, so I will add this to most of the new menus in the future
- Main Quick settings colors changed to blue, additional are still white
- Overclock to 1920 MHz lowered to 1800 MHz because 1800 is much more stable (1920 causes reboots on Marshmallow on my tablet)
- Device now reboots when charging speed is too bad. By default this is disabled. Also added setting "Charge cycle time" and Quick settings for that so you can quickly set up to what charge speed you need (reboots are helpful but not very good for users that want to play device when it charges).
- 'Boost' feature disabled so now DynBS will work as always even when device is laggy
Previous:
1.1.22:
- CPU, Boeffla Sound and Network setting menus in smkd now have the Quick settings feature that helps to configure them by one click instead of tweaking them each
1.1.21.1:
- DynBS updated: now it uses frequencies from 350 to 700 MHz too, so more battery can be saved.
1.1.21:
- smkd now has menu interface which opens by default by command 'smkd' without options.
- All setting commands are removed. Use menu instead.
- In Cyanogenmod ROMs SystemUI is restarted every time when screen becomes disabled, so you may never see it lags or freezes again.
- PCS renamed to SC (SmoothnessControl).
- Overclock enables when device is laggy even when it is disabled in settings
- Redone temperature control: now smkd monitors a device temperature instead of CPU. It leads to better smoothness. Also overheat situations disable some functions like I/O readahead, ZRam, KSM.
- Overheat prevention function fully removed
- Governor Smooth now enables both cores on gestures with two or more fingers instead of simple tap.
1.1.20:
- Added charging compensation: now when battery charging is too slow, CPU Topology and voltage will be changed appropriately for quicker charge.
- Touch boost changed from 1400 to 1000 MHz, but it also boosts busfreq to 400 instead of 267 MHz. Results in better reaction on screen touch.
- Governor Smooth's default sampling_rate changed from 27000 to 16000 for quicker reaction
1.1.19:
- Added ARM CPU Topology for better multithread scheduling
- Some CPU Scheduler changes for smoothness or power saving (tweakable)
- Improved smkd UI code
1.1.18.1:
- Fixed performance/smoothness problems.
1.1.18:
- Added new default configuration "throughput"
- GPU acceleration is now forced for all apps and it is changeable from smkd.
- I/O scheduler SIOPlus added.
- DynBS is returned (one user asked for it as it really saves battery, as he said).
1.1.17:
- User profiles are no more exist, replaced with default configurations" instead. They are: smooth, battery, ram and cool. After each launch of smkd (mostly on reboot) configurations are removed and recreated to always be fresh and up to date.
- Added ability to create, rename and delete profiles by normal way, but default profiles cannot be replaced, deleted or renamed through smkd (only "by hands").
- GPU settings: composition and forced GPU-acceleration from Android settings for developers.
- Tripndroid and Zen I/O schedulers are added.
1.1.16.1:
- Configurations loading is now be always successful (but only if appropriate file exists), without that annoying errors "try again later, please..."
- Small tweaks optimization
1.1.16:
- Overclock now disabled by default, as it was on 1.1.14 and before, for battery saving (overclock eats too much battery). Can be enabled with command 'smkd -c -o 1'. Temperature control is now optimized for both CPU overclock and hardware maximal frequency modes.
- smkd interface improved a little.
- KSM functionality added with some fixes for Mali GPU driver bugs in userspace.
- Default temperature limit is now 64 C (before it was 67 C). This is done for more stability when the weather is hot.
- Some changes for smoothness and stability...
1.1.15:
- Overclock is enabled now for any time when screen is enabled (no more boost).
- Developed overheat preventing functions that cool device when temperature is between 90% of threshold and higher. CPU frequency will be set according to temperature for the moment (for every 2% will be a different frequency). Function can be disabled but it is not recommended.
- All cooling functions now control voltage too to be more effective.
- Governor Smooth tweaked for more balance (oc_nr_run_threshold->6)
- Governor Smooth: changed logic: half-overclock (to 1.7 GHz) will occur if number of processes running is a half of oc_nr_run_threshold tunable.
- smkd now controls I/O scheduler and I/O readahead settings, they are tweakable with smkd command. Profiles change this parameters too.
1.1.14:
- smkd tweaker program fully translated to english and comes now in two languages. Now it uses Android's property 'persist.sys.language'.
If your device configured for any language excepting russian, then program will be in english for you. At the other case it will print out text and messages in russian.
- Improved custom configurations in smkd. Now it loads profiles synchronous with service (by using mutex) instead of relaunching it with shell stop/start (it was too slow and even buggy to do that).
- DynBS will not be in kernel anymore, it is not so effective as needed. Instead, I've added a profile tweaks for my governor Smooth, that tweaks easily changeable from smkd (cmd. "smkd -c -s [0-2]").
1.1.13:
- Cron scheduler now works correctly (i'm happy ), doing exactly what was scheduled by the user at the exact times.
- I don't remember what was in this version because forgot this as I worked on 1.1.14 intensively.
-----
* Newer versions contain changelogs in install archive itself.
Very good kernel. Use [5.1.1] Resurrection Remix 5.5.9 + SMK 1.0.20.1 lp.
Nerovinger said:
Very good kernel.
Click to expand...
Click to collapse
Thanks
stuck at bootanimation..
Sent from my SM-T311 using XDA-Developers mobile app
so.hell said:
stuck at bootanimation..
Sent from my SM-T311 using XDA-Developers mobile app
Click to expand...
Click to collapse
What ROM do you use? Android version, SMK version?
AICP BY GR8NOLE.
SMK V-1.1.12
i try dirty flash n clean flash.stuck at bootamination..
Sent from my SM-T311 using XDA-Developers mobile app
so.hell said:
AICP BY GR8NOLE.
SMK V-1.1.12
i try dirty flash n clean flash.stuck at bootamination..
Sent from my SM-T311 using XDA-Developers mobile app
Click to expand...
Click to collapse
Looks like it will not work on AICP ROM, on Cyanogenmod 13 and ResurrectionRemix kernel works fine (I've tested that)... Sorry The reason for that I can not fix this problem is that I do not know (even cannot know) how to make an init.rc (this file starts all Android services on boot) file universal (to support absolutely all ROMs at one time). This is also the reason for three builds of kernel: kk, lp and mm...
Nice kernel. But can you please make a version of your kernel work with the T310 (WiFi)?
Stuck at Bootanimation
ROM: Resurrection Remix 5.6.9 by powermetza
Android Version:6.0.1
SMK version 1.1.12
pawas99 said:
Stuck at Bootanimation
ROM: Resurrection Remix 5.6.9 by powermetza
Android Version:6.0.1
SMK version 1.1.12
Click to expand...
Click to collapse
Try to flash on a clean ROM (with backup of cource)... All fine for me on RR.
Luis_0 said:
Nice kernel. But can you please make a version of your kernel work with the T310 (WiFi)?
Click to expand...
Click to collapse
I can't as i don't know much about modding in '/init.rc' script and also about what differences it has in kernels for T310, T311 and T315... Sorry.
There are too much incompatibilities with builds that are now (they must work everywhere but they don't)...
Ok. Added one question to poll. There are three variants for ROM and two for working or not (six at all), for me all works fine, so I voted for the first three answers.
Version 1.1.14 developer testing ends now, smkd fully translated to english. I will now build the kernel and then begin uploading it to Google Drive.
(sorry for my incorrect english)
igoryan94 said:
Try to flash on a clean ROM (with backup of cource)... All fine for me on RR.
Click to expand...
Click to collapse
Stuck at bootanimation even after flashing on a clean ROM.
waiting for update..
Hey @igoryan94,
Thanks a lot for making this great kernel!
I've flashed the KK version along with the stock ROM http://forum.xda-developers.com/showthread.php?t=2789510. It works very nicely. Would you please show an instruction (or a specific terminal command for newbies like me) of how to overclock CPU to 1.9GHz? Currently the max speed is 1.5Ghz according to kernel audit.
Thanks again
Hey I cant change the cpu frequent through kernel adiutor. As soon as i change the freq to 1920 it changes back to 1500.
igoryan94 said:
I can't as i don't know much about modding in '/init.rc' script and also about what differences it has in kernels for T310, T311 and T315... Sorry.
Click to expand...
Click to collapse
@gr8nole could help him in this?
xdaSEx10 said:
Hey @igoryan94,
Thanks a lot for making this great kernel!
I've flashed the KK version along with the stock ROM http://forum.xda-developers.com/showthread.php?t=2789510. It works very nicely. Would you please show an instruction (or a specific terminal command for newbies like me) of how to overclock CPU to 1.9GHz? Currently the max speed is 1.5Ghz according to kernel audit.
Thanks again
Click to expand...
Click to collapse
CPU frequency is automatically changed to 1920 MHz when special conditions are met (they are: "blocked" processes and waiting for I/O).. Version 1.1.5 will have full 1920 MHz CPU frequency.
I will now upload "developer" version of kernel 1.1.15_dev for KitKat users. If you want, test that) It is not fully contains all changes that i've done, but I'm not at home now and cannot compile new build... For now it has smooth overheat prevention and overclock fully enabled.
Hunter97 said:
Hey I cant change the cpu frequent through kernel adiutor. As soon as i change the freq to 1920 it changes back to 1500.
Click to expand...
Click to collapse
Please wait for SMK version 1.1.15, it will use 1920 MHz as a default frequency always excepting overheat moments (that will disapear very quickly) and governor's battery saver mode.
You can also use a developer version 1.1.15_dev if you use JellyBean/KitKat as your ROM.
Ok, "dev" version released for testing.
When I will return home, I will release another testing version that has an I/O scheduler change functionality, optional Overheat Prevention and changing min_freq to minimal (50 MHz) when temperature event occurs. Maybe it will have even more features (I have smkd code with me, PC is only needed for compiling kernel and ramdisk).
on NoleKat.T310. v1.1 KK 4.4.2 not boot. on CM13 it's ok, but, for me, the best android versioni for this tablet is kk stock and i install NoleKat.T310. v1.1.
jamax80 said:
on NoleKat.T310. v1.1 KK 4.4.2 not boot. on CM13 it's ok, but, for me, the best android versioni for this tablet is kk stock and i install NoleKat.T310. v1.1.
Click to expand...
Click to collapse
SMK will not boot on T310. Only T311.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
High performance & power saving tweaks for all devices (THAT ACTUALLY WORK)
Introduction
LKT is a cumilation of different strategies that target certain kernel settings. What makes this special and stand out from the crowd is being universal and device specific at the same time. And it's also BS free. Using simple functions LKT detects the hardware of your device then it applies the corresponding changes. It does support all mainstream platforms including Snapdragon, Kirin, MediaTek etc. covering hundreds of devices.
These tweaks have been tested and can stand up to 12-14H of SOT with no-compromise on performance all smooth as a baby's bottom.
However, it should be noted that this does not apply to gaming, facebook, snapchat, instagram and heavy camera usage ...etc
Nothing can be done for anything that is an automatic battery killer and forces maximum resources usage at all the time.
How does it work?
LKT aims to achieve a balance between power consumption and performance. Compared to tuning the parameters manually, LKT adopts Project WIPE open source interactive parameters for all mainstream SOCs that are generated via machine learning AI and can adapt to multiple styles of workload sequences. This idea is similar to EAS, which takes into account both performance and power consumption costs through power consumption models and workload sequence. But obviously, EAS has a much lower response time and replaces tuning with decision logic. In addition, it also includes other parameter tuning, such as HMP scheduler parameters, virtual Memory, GPU, IO blocks tuning, and doze rules to unify the rest of the kernel parameters for a more consistent experience.
LKT also supports schedutil and other EAS governors in devices like the Pixel 2. Unlike interactive, schedutil does not provide a wide range of tuning parameters but there are some workarounds. In Snapdragon 835 for example depending on what profile is selected, LKT limits the maximum frequency of big cores accordingly because big clusters power efficiency of SD835 dramatically decreases above 2 GHz, as a trade of losing 15% performance, improving power consumption by 40% or more is a much better deal.
Features
Multi-Profile
Improved smoothness & battery life
Advanced interactive governor tuning (Project WIPE)
EAS devices Support
RAM management enhancements
IO blocks enhancements
Enabled & configured wakelock blocking
Disabled a excessive logging at kernel level (Improves battery life as well as performance)
Other miscellaneous adjustments to enhance power efficiency
Profiles
Battery - Can acheive ~2 hours or more longer on-screen battery life, may lag in some scenarios where the load fluctuates dramatically.
Balanced - Can acheive ~1.5 hours or more longer on-screen battery life with little performance compromise .(Recommended)
Performance - Can acheive ~1 hour longer on-screen battery life , same as balanced profile with more responsiveness. .
Turbo - Ideal for intense high demanding tasks, where the load drastically fluctuate (not necessarily in games) . Will ensure reducing lags by ~90% for no more than ~20% increase power in consumption.
Click to expand...
Click to collapse
Requirements
Magisk or SuperSU or init.d support
Busybox
Installation
Flash in TWRP or Magisk manager
Follow the given instructions
Reboot
Read the FAQ from here or here before asking anything. (Regularly updated)
Credits
Code:
Project WIPE contributors [URL="https://github.com/yc9559/cpufreq-interactive-opt/tree/master/project/20180603-2"]Github[/URL]
yc9559 - @CoolApk
cjybyjk - @CoolApk
[U]Special Thank[/U]
Zackptg5 & ahrion - Unity template
topjohnwu - Magisk
osm0sis - Busybox
Contributors
@korom42
Sources
Original XDA thread
Github
License
Licensed under the GNU General Public License v3
Donate to support further LKT development
FAQ(frequently asked question)
Also check for FAQ here (More often updated)
• How do I apply these tweaks?
Simply flash LKT zip in recovery or Magisk app then reboot.
• Do I have to be rooted?
Yes, LKT needs either Magisk or SuperSU or init.d support.
Beware that LKT is a collection of advanced tweaks that act on kernel level. If you don't know how it works, then please try this at your own risk. I won't be responsible for any damage or loss. Never forget to make backups.
• What are the available profiles ?
Battery: Can acheive ~2 hours or more longer on-screen battery life, may lag in some scenarios where the load fluctuates dramatically
Balanced: Can acheive ~1.5 hours or more longer on-screen battery life with little performance compromise (recommended)
Performance: Can acheive ~1 hour longer on-screen battery life , same as balanced profile with more responsiveness
Turbo: Ideal for intense high demanding tasks, butter smooth gaming for a long periods. Will ensure reducing lags by ~90% for up to ~20% more power consuption than stock.
Click to expand...
Click to collapse
• How to switch between profiles?
Method 1
To access the command controls screen using terminal type
Code:
su
lkt
Then follow the instructions
Method 2
Now you can also you run these commands to directly switch profiles (must run with root permissions)
Code:
lkt 1 (for battery profile)
lkt 2 (for balanced profile)
lkt 3 (for performance profile)
lkt 4 (for turbo profile)
Method 3
You can also to re-flash the module twice to change the profile but you will have to reboot using this way.
• Can I use LKT with another MOD ?
** Compatibility list** You can still these mods since they do not affect LKT parameters.
Universal XML Patcher
GMS Doze
ForceDoze, Naptime, Greenify, Amplify, Power Nap
MCS (Magic charging switch) & Charging control mods..etc
BlackenedMod (Pixel 2)
** Incompatibility list ** Do not use similar mods with LKT, here is a list of some known MODs that will interfere
AKT (Advanced Kernel Tweaks)
Spectrum
Helix Engine
L-Speed
GovTuner
Every bullsh*t placebo MOD like : CrossBreeder, NFS, KITANA, FeraDroid ..etc
Heavily tweaked ROM such as : xXx (OP6/6T)
• Will this work on my ROM & Kernel ?
It should work on almost every Stock, AOSP or Lineage based ROM & Kernel
The only problem is with heavily tweaked ROMs, they can interfere with LKT.
• Will this work on my device?
This mod support a large list of devices you can check the compatibility list.
• How to make sure that LKT is working ?
Using a file explorer with root access check LKT logs in the location below ( share & upload yours in case of having troubles)
Code:
/data/LKT.prop
•I cannot find or open LKT logs
To properly open LKT.prop you need a file manager with root access your app may not be working correctly. Here's some apps I can recommend
MiXplorer
FX File Explorer + ROOT addon
You can also access your alogs using terminal by running this code
First type su then copy and past this line :
Code:
cat /data/LKT.prop
• My logs are incomplete
Make sure you are using the latest version of Magisk 18.0+
Install busybox by @osm0sis
• My device Lags or not longer smooth What do I do?
This can happen and it's a normal thing. As I have stated before, all these tweaks have been done for fit certain usage which might not be the same as yours. Because this, your device may lag in some scenarios under heavy loads (If you are experimenting huge lags, you have done something wrong). And yes, this can be fixed. We have a couple of ways of fixing it. First of all if you are using battery profile try switching to another one, if this doesn't help you consider the following steps :
Do a factory reset
Get rid of unnecessary background apps
Try a different ROM or Kernel
Try another profile
• These settings don't work & I'm not getting great screen on time
Keep in mind these tweaks have been tested on certain scenario that might not the same as yours, read the introduction in OP to understand more about this. However if you are getting worse results than before you are probably doing something wrong and here are some recommendations for you
Do a factory reset
Get rid of unnecessary background apps
Try a different ROM or Kernel
Try another profile
• How to update LKT?
Dirty flash the new zip or install the update via Magisk manager and it will automatically upgrade.
• How to uninstall LKT?
Flashing the module for the second time will remove LKT. You can also remove it from Magisk app.
Compatibility
Snapdragon 845
Snapdragon 835
Snapdragon 820-821
Snapdragon 810-808
Snapdragon 801-800-805
Snapdragon 660
Snapdragon 652-650
Snapdragon 636
Snapdragon 625-626-630
Snapdragon 615-616
Snapdragon 450
Snapdragon 435
Snapdragon 430
Snapdragon 425
Snapdragon 410-412
Snapdragon 400
Exynos 9810 (Samsung)
Exynos 8895 (Samsung)
Exynos 8890 (Samsung)
Exynos 7420 (Samsung)
Kirin 970 (Huawei)
Kirin 960 (Huawei)
Kirin 950-955 (Huawei)
kirin 650-655-658-659 (Huawei)
Helio x20-x25 (MT6797-MT6797T)
Helio x10 (MT6795-MT6795T)
Helio P10 (MT6755)
Intel atom Z3560-3580
Click to expand...
Click to collapse
**Please note that even if your device isn't listed here some parameters may still apply
Changelog
Code:
v1.5.2 (11/03/2019)
- Disabled GPU thermal restrictions on Mediatek SoCs
- Various fixes and CPU enhancements for Mediatek SoCs
- Removed zRAM (SWAP) configuration
- Other minor changes & enhancements
- Bug fixes
v1.5.1 (07/03/2019)
- Bug fixes
v1.5.0 (06/03/2019)
- EAS fixes and performance enhancements
- GPU parameters adjustements
- Disabled GPU thermal restrictions on Snapdragon SoCs
- Adreno Idler tweaks enhancements
- Storage scheduler enhancements
- Memory management enhancements
- Various zRAM & SWAP optimisations
- Other minor changes & enhancements
- Bug fixes
v1.4.9 (09/02/2019)
- Memory management adjustments
- Fixed interactive governor parameters being overwritten by system after a while for some devices
- Added back deep-sleep enhancements props
- SWAPs/zRAM are no longer disabled
- Auto-detect existing profile when upgrading (user interaction is not needed anymore)
- Minor bug fixes
v1.4.8 (05/02/2019)
- Increased delay after boot
- Bug fixes
v1.4.7 (04/02/2019)
- EAS profiles fixes
- CPU boost fixes for some devices
- Memory management enhancements
- Removed any deep-sleep related tweaks
- Bug fixes
v1.4.6 (02/02/2019)
- Important bug fixes
- zRAM is not tweaked anymore and left for the kernel (only disabled for devices +6GB RAM)
v1.4.5 (01/02/2019)
- Re-worked EAS profiles
- Prefer schedutil on EAS kernels
- Added CPUSET optimizations
- Added schedtune optimizations
- Added control groups (CGroups) optimization
- Enabled zRAM for 4GB RAM devices
- Enabled & adjusted Low memory killer
- IO block tuning enhancements
- FileSystem (FS) enhancements
- Enabled Fast Dormancy (may help with cellular network idle drain)
- Major bug fixes
v1.4.4 (19/01/2019)
- Unity template update 3.2
- SoC detecion enhancements
- Increased delay at boot before applying tweaks to 1 min
- Minor enhancements
- Bug fixes
v1.4.3 (16/01/2019)
- Unity template update v3.1
- Fixed changing LKT profile not sticking after reboot
- Added ability to change profiles with simple commands (useful for tasker)
```
lkt 1 : for battery profile
lkt 2 : for balanced profile
lkt 3 : for performance profile
lkt 4 : for turbo profile
```
- EAS fixes
- Improved compatibility for custom kernels
- Removed Low Memory Killer tweaks
- Swapping is no longer disabled for devices less than 4GB RAM
- Bug fixes
v1.4.2 (01/01/2019)
- More Bug fixes
v1.4.1 (01/01/2019)
- Fixed some bugs after last update
v1.4.0 (01/01/2019)
- SoC detecion enhancements
- Bug fixes
v1.3.9 (29/12/2018)
- Added command line controls
- Now LKT perefers interactive if kernel has both schedutil & interactive
- Less aggressive LMK
- Crash fix for some devices
- Other minor changes & bug fixes
To access the new commands screen using terminal type
```
su
lkt
```
Then follow the instructions
v1.3.8 (28/12/2018)
- SoC detection issues fixes for samsung & other devices
v1.3.7 (27/12/2018)
- Fixed system crash & missing logs after last update
- Other minor changes
v1.3.6 (27/12/2018)
- Fixed soc.txt file not being created when SoC detection fail
- Added new wakelocks to block
- Adreno Idler parameters changes
- Minor enhancements
- Bug fixes
v1.3.5 (26/12/2018)
- SoC detection issues fixes
- Reduced entropy values
- Minor enhancements
- Bug fixes
v1.3.4 (24/12/2018)
- Added support for snapdragon 4xx series
- Added support for Helio P10 (MT6755), kirin655, kirin658, kirin659
- Fixed LTE Signal bug
- Fixed some parameters not being applied
- Fixed detection bug for snapdragon 660
- Added device support check in logs
- Unity template update 2.2
- Script enhancements
- Bug fixes
v1.3.3 (23/12/2018)
- EAS parameters adjustments
- Reverted HMP scheduler changes
- Fixed RAM capacity & CPU frequency not displayed properly in LKT.prop
- Crashes bug fix
- Scrolling bug fix
- Crashing apps bug fix
- Minor enhancements
- Bug fixes
v1.3.2 (22/12/2018)
- Minor installation bug fixes
v1.3.1 (22/12/2018)
- EAS tuning is back for more devices (manual parameters - not WIPE)
- EAS parameters adjustments
- HMP scheduler adjustments
- Updated RAM detection method
- Memory management fixes
- LMK enhancements
- Added Lazyplug tunning
- Removed busybox check
- Module template updated to latest UNITY 2.1
- Module installation fixes
- Minor enhancements
- Bug fixes
v1.3.0 (19/12/2018)
- Fixed hardware auto-detection fail after last update for some devices
- Added support for sultanxda cpu boost implementations
- Updated to latest UNITY template 2.0
- Bug fixes and refinemetns
v1.2.9 (18/12/2018)
- Important chip detection fixes
- Improved swap detection & removal
- Bug fixes
v1.2.8 (18/12/2018)
- Bug fixes for manual chip detection workarround
v1.2.7 (18/12/2018)
- Minor fixes
v1.2.6 (17/12/2018)
- Added manual workarround for devices with unrecognized chip (Huawei,Xiaomi etc..)
- Removed EAS support (except sd845) untill further notice (too experimental)
- Corrected SD845 configs
- Agressive tunded LMK for Turbo profile for better gaming experience
- Fixed Termux app conflicts
- Bug fixes and refinemetns
v1.2.5 (17/12/2018)
- Added Performance & Turbo profiles
- Added partial support (balanced profile only) for exynos9810, kirin650, sd615
- Fixed battery drain for EAS devices
- Fixed some devices not being recognized (again)
- Fixed some bugs with low RAM devices
- Fixed RAM capacity not being displayed correctlly
- Script refinements
- A lot of bug fixes
v1.2.4 (16/12/2018)
- Fixed connectivity issues for some devices
- Improved SOC chip recognition for some devices
- Other minor bug fixes & refinements
Thanks to @pKrysenko & all telegram group members for testing
v1.2.3 (15/12/2018)
- Minor bug fixes
v1.2.2 (14/12/2018)
- EAS parameters enhacements
- Memory tuning enhancements
- Added support to SD615/SD616
- Changed hardware detection method
- I/O scheduler changes
- Removed forced doze for GMS & ril services
- Improved scrolling & FPS in applications
- Added detailed battery health check
- Other minor bug fixes & improvements
v1.2.1 (07/12/2018)
- Fixed a bug that makes governor parameters not stick after a while
- Fixed a bug where CPU is not recognized correctly (Improved SoC detecting)
- Other minor bug fixes & improvements
v1.2 (05/12/2018)
- Added missing cpu boost for some SoCs on balanced profile
- Improved swap detection & disabling (again)
- Reviewed & removed some stuff
- Other minor bug fixes & improvements
v1.1 (04/12/2018)
- Fixed a bug where chip name in upper case isn't recognized
- Swap partitions detecting improvements
- Some small but important script code fixes
Thanks to whalesplaho @XDA for testing and discovering this
v1.0 (04/12/2018)
- First release
Downloads
• Google Drive
You can also download LKT from Attachments or Magisk repo
Beta testing & Support
• Join our telegram chat
Will this change any of my settings in kernel auditor and HEBF optimizer? Cause you said don't use with L speed and L speed can change some of my kernel parameters in kernel auditor and HEBF can if not setup the right way.... Does this module have a U.I
PoochyXXX
PoochyX said:
Will this change any of my settings in kernel auditor and HEBF optimizer? Cause you said don't use with L speed and L speed can change some of my kernel parameters in kernel auditor and HEBF can if not setup the right way.... Does this module have a U.I
PoochyXXX
Click to expand...
Click to collapse
It's better to not use any other mods with this so they won't conflict, if your device is supported you won't need anything else
This module does have a UI, to access it via terminal type su then lkt and follow the instructions. Please refer to the help section next time before asking anything.
korom42 said:
It's better to not use any other mods with this so they won't conflict, if your device is supported you won't need anything else
This module does have a UI, to access it via terminal type su then lkt and follow the instructions. Please refer to the help section next time before asking anything.
Click to expand...
Click to collapse
Alright will do
PoochyXXX
Unistaller zip.......?
Plz
Sent from my GT-I9500 using Tapatalk
nomigujjar said:
Unistaller zip.......?
Plz
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
Read the FAQ
Hello,
My device is Samsung Note 4 - SM-N910F.
I'm not on Samsung but on AOSP (6.0.1 - because of some outdated xposed mods) as I prefer stock, bloatware-less, android ROM.
The thing is, battery life has always been worse than original Samsung ROM, mainly because of doze not being strict enough, and lack of wakelocks optimisation.
Naptime, Greenify and Amplify helped me reducing those issues, along with Kernel Adiutor underclock increasing battery life. And Icebox for freezing battery using when screen is turned off.
Now comes your work, I flashed your zip. I was a bit skeptical of what it could make to my OS to magically improve battery life... But I have to be honest, it improved blocking those ridiculous wakelocks when my phone is idle.
See by yourself : 0.2% of battery during 6h sleep (airplane mode on, because radio waves). When it is usually 0.8% to 1%. Ofc when phone is used like using camera, it won't do magic over battery, but those unnecessary wakelocks event seems to be fixed.
So, yes. Thank you, thank you very much.
I got a weird bug on the poco f1 using lkt (mostly balanced profile) when I charge my battery indicator get stuck to 75%. However it still charge since it rest a bunch of time stuck to 75%
Rom xiaomi.eu
Kernel Extreme kernel v9
Hello. I installed the zip without problems and restarted my phone. Nowhere, however, do I see something of cloudy. Neither at Mtweaks or in the info settings themselves. How do I know that it works now? And how can I change the profiles?
cosmobi said:
Hello. I installed the zip without problems and restarted my phone. Nowhere, however, do I see something of cloudy. Neither at Mtweaks or in the info settings themselves. How do I know that it works now? And how can I change the profiles?
Click to expand...
Click to collapse
Read the F.A.Q
Does this mod stay active after each reboot? Or do I've to select each profile on reboot
fi5z.x9 said:
Does this mod stay active after each reboot? Or do I've to select each profile on reboot
Click to expand...
Click to collapse
Yes it does stay active by saving the selected profile even after reboot.
Would you consider LeeDroid a heavily tweaked ROM, and one that would interfere with LKT? I removed all L-Speed settings, and I'm getting incredible performance yet slightly less SOT. I'm willing to make the sacrifice, unless you would advise against using this MOD with LeeDroid. Thanks in advance for any response, and awesome work!
How does this mod compare to the NFS-Injector module? Can they be used safely together
Hi, how do I change profile.. I am on balanced need to go to performance
I tried reinstalling but while reinstalling it automatically detected device in balanced and didn't ask me to change
Harshdeepagrawal said:
Hi, how do I change profile.. I am on balanced need to go to performance
I tried reinstalling but while reinstalling it automatically detected device in balanced and didn't ask me to change
Click to expand...
Click to collapse
MDV106 said:
How does this mod compare to the NFS-Injector module? Can they be used safely together
Click to expand...
Click to collapse
If you took 10 seconds to read the FAQ you wouldn't have to ask these questions.
https://telegra.ph/LKT---FAQ-03-25
korom42 said:
If you took 10 seconds to read the FAQ you wouldn't have to ask these questions.
https://telegra.ph/LKT---FAQ-03-25
Click to expand...
Click to collapse
Thanks for sarcasm
korom42 said:
If you took 10 seconds to read the FAQ you wouldn't have to ask these questions.
https://telegra.ph/LKT---FAQ-03-25
Click to expand...
Click to collapse
Im glad I didnt, this module is useless anyway.
MDV106 said:
Im glad I didnt, this module is useless anyway.
Click to expand...
Click to collapse
Right.. it clearly is ??
Features and Description :
Azure App is a profiler app wich have total 8 of profile, each profile have different kind of tunings and different processor have different kind of tunings too. and thereis no placeabo effect in this app nor collect your data.
so here is the Profile simple explanation :
- Chill = Chilling with social media, youtube and small games without worrying about battery drain.
- Chill Max = Chill with more performance
- Smart Casual = Near Default kernel Settings but with better Mem management and better CPU tunings
- Low IQ = Have Performance between Chill and Lazy Plus, Best for Social media and some multitasking. ( New )
- Fast AF = Means hope to push your phone to the limit = more heat
- Game Mode = enchanted version of Fast AF with slightly improve CPU consistency and restrict app usage
- Lazy Boi = Extreme Low power profile that hope to maxed out battery backup will cause LAG !
- Lazy Plus = up to 1.5x better performance than Lazy boi but hope still have similiar Battery Backup
Supported Processor type
- SD636HMP/EAS/OC
- SD675EAS
- SD660 non OC
Just Remember Each kernel / device have totally different tunings. and this is not a universal App that works on all kind of ****
And dont use other module otherwise will destroy enything..
For More Information you can visit this channel..
https://t.me/r0thAzureApp
Also Check Azure App Website
https://r0thbaby.github.io/AzureAppWebsite/
Love my work ? You can buy me a cup of coffee
https://www.paypal.me/r0thbaby
Cheers
r0th Baby.
Status : ALPHA
Version : 0.2.4
last Update : 13/06/2020[/QUOTE]
Changelog 0.2.4
- App now works on all sdm636/sdm660/sdm675EAS devices/kernel/rom/stock rom with fixes inside ( PLEASE UNINSTALL THE OLD APP VERSION AND INSTALL THIS VERSION )
- Mem setting now more battery oriented
- Some profiles more battery oriented
- Ultra ram setting now patched with LMKD settings trying to prevent instantly getting closed and hold more app inside memory ( BETA )
- X00T thermal change to Backup and Delete Thermal ( for all kind of phone )
- Ultra Battery saving setting changed to more battery oriented
- Fix Visible and non Visible bugs
- Lots of under the hood changes not worth writing about, but equally important
Thanks to @project_gh0st and https://instagram.com/fake.itt team for the icon. dont forget to follow the Instagram for more Cool Content
Changelog 0.2.3
- Added new kernel support for Requiem
- Added new feature Ultra Ram Setting
- Chill become slower ( More Battery Oriented )
- Change theme now required to restart app ( Prevent mem leak )
- Change App icon and other icon, thanks to Ghost
- Reduce APK size by 1mb+ ( now app much faster )
- Change Activity now will have garbage collection triggered
- Fix lots of bugs ( Visible and non Visible bugs )
- Lots of under the hood changes
Older Changelog 0.2.2
- All profile except Low IQ slightly improved ( Battery Oriented )
- Introduce 3rd UI -> Neomorphism UI : Tips -> Tap azure logo to reset profile back to default
- Change theme now required no restart
- Lot of fixes including for violet and zen+ also more bugs fixes
- Mem management now Battery Oriented
- Hack kernel checker detection so its slightly faster
- Custom doze tweak improved
- Lots of under the hood changes
Older Changelog 0.2.1
- Support Xenium Kernel ( EAS )
- Support Zen+ kernel ( STOCK )
- Support Violet device with Azure Kernel
- Source Clean Up
- Remove manual kernel checker, and become Automatic kernel Checker, more fast, more flexible, more easy to use
- Each UI now will have toggle to switch between the UI
- Fix TRB GameIT Mode Detector for Both UI error
- Fix Mode checker issue
- Stupid IQ now using some lazy boi settings ( can be seen in mode checker log 2)
- Fix Chill lock Issue
- Improve some profile for some kernel
Older Changelog 0.2.0
Changelog 0.2.0
- Support Wolf Kernel ( Caf, Non Caf, EAS)
- New Ultra Battery Saving
- New Experimental UI
- New quick tiles now working as free up memory
- Improve Custom DOZE Tweak
- Fix New UI Bug
- Fix Internal Conflict
- Lock Chill Performance
- Chill Max now fully unlock the performance
- Prevent Lazy Boi get extra performance
- EAS TUNINGS Is In ALPHA STAGE( DONT HOPE TOO MUCH, I WILL KEEP UPDATING EACH EAS PROFILE ! )
- Lots of under the hood changes
Older Changelog 0.1.9
- Fix some bugs in new Ui and Original UI
- Change Original Thermal to Thermal Option
- New Experimental feature UI
- Add Cryzen Kernel Support
- Add new mode Low IQ = Have performance between Chill and Lazy plus
- Custom Doze tunings improved
- Source Cleanup ( Reduce APK size by 90%+ and Reduce installed size by 35%+ also moderately increase app performance )
- Cheking kernel more faster than before
- Fix all typo in some modes
- Lots of under the hood changes
Older Changelog 0.1.8
Change log 0.1.8
• Fix Issue where Lazy and Lazy Plus not giving a lag at all
• Fix New UI bug
• Fix Mode Checker
• Better Looking New UI
• All modes for all supported device / kernel has been refreshed UP TO 1.5x BATTERY SAVING WHILE MAINTAINING ALMOST SAME PERFORMANCE
• New Doze Manager (Located in Experimental Feature)
• New Once you turn on the new UI, it will save and you dont have to turn on again after closing the app
• New HD Icon has been refreshed by Albert Wesker
• New System Tweak with search and match (So no placebo effect Given)
• Better Memory Management on all modes
• So much Under the hood change
• Lots of Under the hood Fixes
• Change Thermal Gaming Mod to Original Thermal (due its bad using that thermal)
• Original UI now Fits all DPI
There is 2 Theme available to select, Doze Manager, also Battery manager, Kernel Checker ( AUTOMATIC KERNEL CHECKER ) and Experimental feature, Neomorphism UI
ROAD MAP
What is the defferent between show and non show?
Tarif.tk said:
What is the defferent between show and non show?
Click to expand...
Click to collapse
Snow effect and no snow effect
This app delete all my music form sd card whay!! It happens when i cleaned cached dada. I know Cached dada does not mean to delete music file trush app.?
Tarif.tk said:
This app delete all my music form sd card whay!! It happens when i cleaned cached dada. I know Cached dada does not mean to delete music file trush app.
Click to expand...
Click to collapse
No way it could delete your music. ive only delete cache from dalvik. it must be something else. no music stored to dalvic cache
@r0th Baby Thread is being closed as it is a duplicate of this thread. Please note duplicate threads are not allowed as per the forum rules:
5. Create a thread topic or post a message only once, this includes external links & streaming media.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ButterLimitsButterLimits - Its A Magisk Module with many features that some you can see and some you can only feel by your device usage.
Its A Magisk ROM or Magisk MOD, we can call it anything. But, I am just releasing it in MOD section because I think its a right place for it because Full ROM is a complete ROM with all system files [Big size] and a small part with custom settings and patches or with some apk files can only be mod or a theme.Why its name is ButterLimits?Many of you already heard "ButterSmooth" in Android Developing, but why?, Because of its smooth functions, smooth touch responses and fast working device.
But many times ButterSmooth experience can eat a lot of battery that our device not supposed to. So, when we add some limits to it for a perfect balance between performance and battery backup.....
Then here comes A ButterLimits and yes its for OOS 11 only right now. But if we remove and edit some files then it should also work as A Universal Mod but not all the features that come for OOS 11 and Open BetaFeatures:-UI Tweaks-Blur effect in background when pull down notification panel and in some more places.
--------Sound Enhancement Tweaks-Some Volume Boost to Speakers and headphones
Much more clear sound
Clear Bass in Headphones
--------Basic Level tweaks-RAM Tweak
Faster Boot tweak (Not noticable)
Improved Audio/Video Recording Tweaks
Improved Gaming Tweaks
Improved Signal Tweaks
Internet Speed Tweaks
Makes Streaming videos Stream Faster Tweak
Graphics Enhancement Tweaks
Scroll and Touch Responsive Teak
Disabled some background logging and data sending
Small Power Saving Tweaks
Dialing/Calling fast Tweaks
Some Dalvik Tweaks
--------System Level Tweaks-Filesystem mount Tweaks
Optimized Media Servers and GMS to save battery
UGMS Doze to save battery
Some more Doze Tweaks for better battery backup
Disabled some Google Wakelocks (Will not harm anything) - will give just better battery backup-Kernel and CPU Level Tweaks-Customized CPU Active Settings for different situations
Some CPU Frequency Tweaks
Forcibly switched off some kernel logging
Some Optimization Tweaks for Improved userspace experience
Small Entropy Tweaks for good balance between performance and battery
Some kernel tweaks to remove wasted CPU cycles
Disabled some kernel Console
Optimized CPU bandwidth
Some more CPU level Miscellaneous Tweaks
Some kernel level network Tweaks to reduce battery eating
Virtual memory Tweaks for good balance between performance and battery
Turned off some kernel debuggers to improve performance and battery life
Disabled Debugging logs to reduce power usage
Disabled GPU Frequency based throttling
Kernel level tweak for better Idle Battery Life
Some more kernel level Miscellaneous Tweaks
Some kernel level Dalvik Cache Tweak
Some kernel level Deep Sleep Tweak
Some non-useful ****s Removed (Cycles timely)
Fstrim Tweak
-------Requirements to use ButterLimits:-Device in working state with Latest Magisk at its place
- OnePlus 8T with OOS 11 Stable/openBeta
-----Flash Instructions-- Download compatible version (Stable or OpenBeta)
- Do not flash just after rom install. Make sure your device is already have working magisk and Phone is fully settled when installed new/updated rom
- Flash ButterLimits in Magisk Manager only and reboot
- After boot when your device is on lockscreen or homescreen, please wait for atleast 2 minutes to make all processes done.
-------Now ButterLimits comes with 2 modes1. Normal (Original ButterLimits)
2. Extreme (Gives some boost to ButterLimits - can eat small battery backup)How to Use Extreme Mode-In Terminal App (I use this one)
-Type su and enter
-Type blboost and enter
-Wait for reboot
-To verify- Check in Magisk Manager
----
-To revert back-
In Terminal App
-Type su and enter
-Type blenable and enter
-Wait for reboot
-To verify- Check in Magisk Manager
--------Update Instructions--Before updating to latest OOS update please remove it first
-After updating to latest OOS and then install ButterLimits again-Uninstall-Same as you do with other modules
Simply in Magisk Manager's modules section, disable, remove and reboot device
-------CREDITS:A BIG THANK YOU to A Developer @topjohnwu - the founder of Magisk.
Magisk is like A God to all Android Modding world right now and the main features is System-Less (It defines itself). On the other side it comes with a lot of features...
@fOmey
@iglitch
@ lAlKenDi
@gloeyisk
@Chainfire
@Zackptg5
@osm0sis
All member of Team- Magisk and more...
If you Like my works or like ButterLimits
- You can donate me by buy me a coffee of your choice
Or
- You can Donate me here - Playstore Link
Downloads-Please don't make mirrors
Before Download please remember some points below:
Developer of ButterLimits will not be responsible for any harm to your device
ButterLimits is not developed to harm any device, but to give your device better
Precautions are in your hands.
Click to expand...
Click to collapse
1. ButterLimits is heavily based on Stock Kernel
2. Some VM Tweaks may or may not conflict while using any custom kernel (can or cannot create some issues)
3. ButterLimits on each boot force kernel to use Schedutil Governor.
4. ButterLimits uses CPU/Governor Tweaks for and on Schedutil Governor only.
5. If you change settings from any kernel tweaking app or just change governor, Then assume it that many CPU/Kernel Tweaks (from ButterLimits) are not in use anymore and conflicting.
6. With ButterLimits, If you use any other mod also that contains Kernel/CPU/GPU tweaks that can heavily create issues.
7. ButterLimits Does it's best with Stock Kernel when it's alone.
8. But obviously you can try ButterLimits with different kernels. (But in that can if you get some issues, it will be difficult or impossible for me to solve it)
9. If you have any sound mode then I recommend trying ButterLimits without any sound mod first to experience actual ButterLimits Sound Enhancement, And then later you can do experiments with other mods.
Conclusion:
Don't expect any support if you are on a custom kernel or sound mod.
However, I may help if possible but don't expect it.
But you can get help from other users in a thread.
Click to expand...
Click to collapse
-----
Please don't make mirrors
> Download latest ButterLimits versions <For any OOS 11 version or OOS 11 OpenBeta version
Changelogs-
> Check Change Logs here <
Anyone test this yet? I'm really intrigued by the blur and the gaming optimization.. I'd flash this but I'm not near any wifi rn
I have installed it and at first glance you can see that it improves the speed quite a bit in all aspects. Installed with Neutrino kernel. Thank you so much for this mod
Req: Is it possible to make the background blurry in recent applications?
Hi. Can u add black icons on quick settings? Wi-fi, Bluetooth, data...
This mod looks very promising, do you plan to relase it for other oneplus phones? Specifically oneplus 7t pro
customan said:
This mod looks very promising, do you plan to relase it for other oneplus phones? Specifically oneplus 7t pro
Click to expand...
Click to collapse
It's already available for 7 Series also.
running good
thanks dev
lpdavidgc said:
I have installed it and at first glance you can see that it improves the speed quite a bit in all aspects. Installed with Neutrino kernel. Thank you so much for this mod
Req: Is it possible to make the background blurry in recent applications?
Click to expand...
Click to collapse
Hi, can you share your compiled kernel? I'm curious to try it but unfortunately Neutrino is a compilable kernel but I don't have the skills whatsoever.
About the mod: runs perfectly, thanks a lot to the developer.
Just to let you know:
- I've been trying it for two days with Radioactive Kernel, at the moment zero problems.
- I have been trying it for two days with the Dolby Atmos app installed (apk + Magisk module), apparently there are no conflicts but I will test more thoroughly and on different scenarios.
Latest OOS 11.08.14.
Hateware said:
Hi, can you share your compiled kernel? I'm curious to try it but unfortunately Neutrino is a compilable kernel but I don't have the skills whatsoever.
About the mod: runs perfectly, thanks a lot to the developer.
Just to let you know:
- I've been trying it for two days with Radioactive Kernel, at the moment zero problems.
- I have been trying it for two days with the Dolby Atmos app installed (apk + Magisk module), apparently there are no conflicts but I will test more thoroughly and on different scenarios.
Latest OOS 11.08.14.
Click to expand...
Click to collapse
Why not just download Neutrino from the Dev? He has a pre release version that is available
Hateware said:
Hi, can you share your compiled kernel? I'm curious to try it but unfortunately Neutrino is a compilable kernel but I don't have the skills whatsoever.
About the mod: runs perfectly, thanks a lot to the developer.
Just to let you know:
- I've been trying it for two days with Radioactive Kernel, at the moment zero problems.
- I have been trying it for two days with the Dolby Atmos app installed (apk + Magisk module), apparently there are no conflicts but I will test more thoroughly and on different scenarios.
Latest OOS 11.08.14.
Click to expand...
Click to collapse
You can get it on telegram searching Neutrino
lpdavidgc said:
You can get it on telegram searching Neutrino
Click to expand...
Click to collapse
Thank you, you were very kind!
Unfortunately I often forget that developers have a Telegram channel, I'm flashing it!
Scroll lags with this module. Removed.
New update...v4.0Performance
-Optimized touch UI tweaks - improves smoothness in systemUI
-Optimized Apps' Launch
-Optimized Database data
Battery
-Some Battery optimizations
Net
-Optimized Net Buffer Tweaks
Sound
-Optimized incall volume boost
-Introducing Dolby Bass+ v3 with ButterLimits v4.0
-Enhanced by Sony Sound
-Optimized Noise Cancellation in Headphones
Other
-Now Tweaks will run every 24 hours automatically
-On each reboot also Tweaks will run and then every 24 hours.
Some RECOMMENDATION with this update: If you have any sound mode then I recommend trying ButterLimits without any sound mod first to experience actual ButterLimits Sound Enhancement, And then later you can do experiments with other mods.
Regards
Mohitash
Mohitash said:
New update...v4.0Performance
-Optimized touch UI tweaks - improves smoothness in systemUI
-Optimized Apps' Launch
-Optimized Database data
Battery
-Some Battery optimizations
Net
-Optimized Net Buffer Tweaks
Sound
-Optimized incall volume boost
-Introducing Dolby Bass+ v3 with ButterLimits v4.0
-Enhanced by Sony Sound
-Optimized Noise Cancellation in Headphones
Other
-Now Tweaks will run every 24 hours automatically
-On each reboot also Tweaks will run and then every 24 hours.
Some RECOMMENDATION with this update: If you have any sound mode then I recommend trying ButterLimits without any sound mod first to experience actual ButterLimits Sound Enhancement, And then later you can do experiments with other mods.
Regards
Mohitash
Click to expand...
Click to collapse
Thank you for this mod. The last 2 versions are working just fine on the 8T open beta 6 without any issues.
Mohitash said:
New update...v4.0Performance
-Optimized touch UI tweaks - improves smoothness in systemUI
-Optimized Apps' Launch
-Optimized Database data
Battery
-Some Battery optimizations
Net
-Optimized Net Buffer Tweaks
Sound
-Optimized incall volume boost
-Introducing Dolby Bass+ v3 with ButterLimits v4.0
-Enhanced by Sony Sound
-Optimized Noise Cancellation in Headphones
Other
-Now Tweaks will run every 24 hours automatically
-On each reboot also Tweaks will run and then every 24 hours.
Some RECOMMENDATION with this update: If you have any sound mode then I recommend trying ButterLimits without any sound mod first to experience actual ButterLimits Sound Enhancement, And then later you can do experiments with other mods.
Regards
Mohitash
Click to expand...
Click to collapse
Unfortunately with this version I have problems with voice messages on Telegram.
They are recorded at a very low volume.
I haven't tried on WhatsApp and other messaging apps because I don't use them.
I think the problem is in one of the optimizations under the "sound" section of the changelog.
Reverted back to the previous 3.8 version for now, thanks for your time.
Stock OxygenOS 11.08.14, stock kernel.
Hateware said:
Unfortunately with this version I have problems with voice messages on Telegram.
They are recorded at a very low volume.
I haven't tried on WhatsApp and other messaging apps because I don't use them.
I think the problem is in one of the optimizations under the "sound" section of the changelog.
Reverted back to the previous 3.8 version for now, thanks for your time.
Stock OxygenOS 11.08.14, stock kernel.
Click to expand...
Click to collapse
Updated the link with new one already.
Try that.
Regards
Mohitash said:
Updated the link with new one already.
Try that.
Regards
Click to expand...
Click to collapse
Thank you very much, with the new 4.0 everything works perfectly!
I disabled the Dolby Atmos app and its Magisk module as you suggested in the changelog: thank you very much for the equalization you have chosen, it's great!
Allow me to give a suggestion to everyone: for safety, disable Dolby Atmos integrated in the OxygenOS with the following command from the terminal:
Code:
su
pm disable -user 0 com.oneplus.sound.tuner
Bye!
Would it be possible to make the dark theme completely black instead of dark grey?