Hello everyone! I put to reverse gear just yellow triangle appears, I found on google that they might be a solution in my factory settings, but I don't know the Code, so do any of you know it, I would appreciate any kind of help, thanks.
Not MTCB, MCU lists MTCD type, requested via report that a moderator move to MTCD forums.
OP, suggest taking the time to getting to know your head unit and the forums. Have fun.
Related
Hi,
I'm new to the forum, and I have searched for an answer but have not found anything.
Hopefully it's a no-brainer for u experts out here.
I'm very tempted to try an update available for MTCD_MX - later than my 1.97b.
I have 5.1.1 MTCD_MX built into my car, and it works great with the original buttons of the dashborad & steering Wheel etc.
Anyhow, at the moment I have no possibility to change the key-mapping in my unit (nothing happen when I open the Key-mapping tool that came with the unit) so I want to know if an update from 1.97b to 2.59 will have any effect on the key mapping at all?
Or maybe there are other reasons why I sohuld / should not do an update - if so, please let me know.
If anyone knows this, please let me know in advance of doing something I would regret
Thanks in advance
Hello, you must modify the car model in the setting factory. You can try GM RAISE
I am running a px5 in a 2010 Insignia and running MX_2.75 on it with all the key mapping running fine. From what I can tell (and I am open to correction here) the key mapping is all done through the canbus adapter - this is why you can't change the key assignments (so my supplier in the UK says).
Thanks both for your comment.
Are updates possible through USB or is mandatory with SD-card via GPS-slot necessary?
(I failed my attempt with USB - so everything was restored to factory, still 1.97b)
GotJsv said:
Thanks both for your comment.
Are updates possible through USB or is mandatory with SD-card via GPS-slot necessary?
(I failed my attempt with USB - so everything was restored to factory, still 1.97b)
Click to expand...
Click to collapse
I use USB without a problem. Are you sure that it is a suitable img?
You might also need to update to Android 6.
GotJsv said:
Hi,
I'm new to the forum, and I have searched for an answer but have not found anything.
Hopefully it's a no-brainer for u experts out here.
I'm very tempted to try an update available for MTCD_MX - later than my 1.97b.
I have 5.1.1 MTCD_MX built into my car, and it works great with the original buttons of the dashborad & steering Wheel etc.
Anyhow, at the moment I have no possibility to change the key-mapping in my unit (nothing happen when I open the Key-mapping tool that came with the unit) so I want to know if an update from 1.97b to 2.59 will have any effect on the key mapping at all?
Or maybe there are other reasons why I sohuld / should not do an update - if so, please let me know.
If anyone knows this, please let me know in advance of doing something I would regret
Thanks in advance
Click to expand...
Click to collapse
You cant use key mapping because it's CANBUS buttons. Updates won't fix this. You can use the app in the development section to address this issue.
I just upgraded to a px5 with 4gb - it's quicker, but remapping is not an option.
i recently purchased an Android SWM 8802 from eBay. This was my very first car stereo swap. The manual described the software functions, but unfortunately didn't show anything regarding the hookup and connections. Additionally, the manual was in such small print I couldn't read it. I started to photograph it and blow it up, but it didn't seem much easier.
I do enjoy writing how-tos and helping others. Would anyone be interested in such a guide if i were to write it? I haven't tested everything such as the rear inputs for video ( although I am working on that). There are little things I've found such as the insertion of a MicroSD card that, if not entirely scanned first, will only play up to what it has scanned.
I'd like to make it more for newbies as well, or have at least a lowest common denominator. Would it be worthwhile doing this with or without contribution from others, or is it more of a niche thing?
emax4 said:
i recently purchased an Android SWM 8802 from eBay..........
Click to expand...
Click to collapse
I don't use these myself but, the following area of the forum is specific for your device and variants.
https://forum.xda-developers.com/android-auto
With that guidance...
The following are just a few threads that also discusses this device as well and may be helpful for you too.
https://forum.xda-developers.com/showthread.php?t=3750908
https://forum.xda-developers.com/showthread.php?t=3796878
Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my SM-G900V device.
emax4 said:
i recently purchased an Android SWM 8802 from eBay. This was my very first car stereo swap. The manual described the software functions, but unfortunately didn't show anything regarding the hookup and connections. Additionally, the manual was in such small print I couldn't read it. I started to photograph it and blow it up, but it didn't seem much easier.
I do enjoy writing how-tos and helping others. Would anyone be interested in such a guide if i were to write it? I haven't tested everything such as the rear inputs for video ( although I am working on that). There are little things I've found such as the insertion of a MicroSD card that, if not entirely scanned first, will only play up to what it has scanned.
I'd like to make it more for newbies as well, or have at least a lowest common denominator. Would it be worthwhile doing this with or without contribution from others, or is it more of a niche thing?
Click to expand...
Click to collapse
Hello. Ive just got installed my 8802 with a rear view cam.. is there any way to change the camera assistance rulers? Because its too small on my display.
Gizda88 said:
Hello. Ive just got installed my 8802 with a rear view cam.. is there any way to change the camera assistance rulers? Because its too small on my display.
Click to expand...
Click to collapse
I have a dedicated camera set to a separate dashcam / backup screen, and haven't had to mess with those. I think you may be stuck with that since the monitor isn't controlled by any Android type of software.
Gizda88 said:
Hello. Ive just got installed my 8802 with a rear view cam.. is there any way to change the camera assistance rulers? Because its too small on my display.
Click to expand...
Click to collapse
I've been thinking about this, but keep in mind I haven't gotten any video on my monitor yet. What is the resolution of the camera? Maybe it's too big or too small so that the reverse guidelines aren't accurate.
phone link issue
hello, i bought the car radio andoid swm 8802 and when trying to connect to phone link - gives me an error to go in mob setting - developpers option - usb debug to allow . but have nothing on my samsung s9+ about that can someone help thank you in advance.
Mine seems to be working ok after a couple of months. The GPS stopped work so I figured it just needed a reboot, but I couldn't figure out how to do that. Long press on the main button just seems to turn off the screen. In the end I pulled the fuse out. When it restarted there was the swirling car logo and I had to reset the time and a couple of other things and, lo, the GPS was working again. If it stops it would be nice to be able to reboot without pulling the fuse again.
I have set up the SWM 8802
Some how I switch out of english
I am not able to set the time
I can not get to setup
Does anyone know how to do a reboot to get the factory settings
The reset does not reboot The changes have all been saved
Glen
emax4 said:
i recently purchased an Android SWM 8802 from eBay. This was my very first car stereo swap. The manual described the software functions, but unfortunately didn't show anything regarding the hookup and connections. Additionally, the manual was in such small print I couldn't read it. I started to photograph it and blow it up, but it didn't seem much easier.
I do enjoy writing how-tos and helping others. Would anyone be interested in such a guide if i were to write it? I haven't tested everything such as the rear inputs for video ( although I am working on that). There are little things I've found such as the insertion of a MicroSD card that, if not entirely scanned first, will only play up to what it has scanned.
I'd like to make it more for newbies as well, or have at least a lowest common denominator. Would it be worthwhile doing this with or without contribution from others, or is it more of a niche thing?
Click to expand...
Click to collapse
I am struggling along...
I swapped my 2017 Horda Ridgeline PH-3804 Clarion out for the SWM 8802
Somehow I have changed the language from english and cant return...
I can not set the clock...It has set eastern time with GPS
I have radio and bluetooth working but can not get to setups
I think I have to reset or reboot the ROM to get to factory settings?
The reset does not reset the ROM changes...
I have looked at posts for 8.01 firmware upgrades but can not figure them out?
Any idea of how to reboot the SWM 8802? I have to start over to return to
english and get clock set and settings...
I hope USB to USB B adapters that will arrive shortly will connect sat receiver and the
CD player and the back up camera...
Glen [email protected]
Glen F said:
I am struggling along...
I swapped my 2017 Horda Ridgeline PH-3804 Clarion out for the SWM 8802
Somehow I have changed the language from english and cant return...
I can not set the clock...It has set eastern time with GPS
I have radio and bluetooth working but can not get to setups
I think I have to reset or reboot the ROM to get to factory settings?
The reset does not reset the ROM changes...
I have looked at posts for 8.01 firmware upgrades but can not figure them out?
Any idea of how to reboot the SWM 8802? I have to start over to return to
english and get clock set and settings...
I hope USB to USB B adapters that will arrive shortly will connect sat receiver and the
CD player and the back up camera...
Glen [email protected]
Click to expand...
Click to collapse
wiring for the swm8802 colours noted attach my 2017 honda ridgeline
Hello everyone. I’ve got a hizpo stereo that a friend of mine give me a few weeks back. The numbers on the side of the radio is ADY17009. It’s running Android 7.1.2. The problem I’m having with it is the screen is inverted. I’ve tried the reset button tried erasing everything no luck. I tried accessing developer mode pressing build number 7 times and it didn’t let me access it. Anyone know where I can get a copy of the stock firmware and operating system on this thing or can I upgrade it to the latest and hopefully it will fix the issue. I can’t sign up on hizpo website. Every time I try to I get a connection timed out error. I had posted in the general forum so please delete that. That’s what I get for not reading lol.
robert6983 said:
Hello everyone. I’ve got a hizpo stereo that a friend of mine give me a few weeks back. The numbers on the side of the radio is ADY17009. It’s running Android 7.1.2. The problem I’m having with it is the screen is inverted. I’ve tried the reset button tried erasing everything no luck. I tried accessing developer mode pressing build number 7 times and it didn’t let me access it. Anyone know where I can get a copy of the stock firmware and operating system on this thing or can I upgrade it to the latest and hopefully it will fix the issue. I can’t sign up on hizpo website. Every time I try to I get a connection timed out error. I had posted in the general forum so please delete that. That’s what I get for not reading lol.
Click to expand...
Click to collapse
This is usually a symptom of a loose connection in the hardware(believe it or not, a good shake, tap or bump this way or that way has been known to solve this) or a symptom of the sensor needing to be recalibrated(also solved by shaking/bumping or even lightly dropping on a soft surface from about 12 inches, but doing it while the device is powered off)
Or, if the device still functions correctly, there are apps that can recalibrate the sensors for you.
As for finding the stock firmware...
If a Google search for:
"Return to stock (your model number)"
Is not finding anything, then it probably isn't available. These cheap, off brand devices usually do not get any software support of any kind from the manufacturers, they do not release the stock source or the stock firmware to the public.
If it came down to really needing to flash the device, you'd have to look for a firmware from a device that uses the exact same hardware as the device you own. That can be very difficult, it requires opening the device to look at the numbers on the hardware components, then using those to compare to other devices. If one of those devices is the same as yours and has a firmware available, you can use it.
Sent from my LGL84VL using Tapatalk
Hi All new here so hello first.
I have just bought a Android TMOTEC head unit for my corsa and come across a problem.
The launcher wont load and so wont let me onto the main screen it just keeps looping.
I have tried the reset button and pulled the power but still same.
There is a factory reset I have found but requires a password and its not in the manual.
So does anyone know the password to these models.
Thanks
Hello, I recently tried to change the MCU of my unit. I changed it directly for an HA MCU, but obviously I got an unmatched version.
I have reinstalled the HXD but now the unmatch version is not removed, a beep sounds every few seconds, the touch buttons and bluetooth do not work.
All this before reading the "verified cross compatible MCUs" thread (I know, my fault). I have read and understand that I have to export the mcu.cfg file, but now I don't have the file with the initial configuration, and I don't have the latest MCU either, since it came with version V3.71_1, and now I only find v3. 62e.
I would appreciate if someone can help me.
Thank you very much.
To remove the beeping, try Mcu Unmatch Unlock. Button calibration and bluetooth settings are in factory settings. Choose your bluetooth type, if you don't know what you have, you have to try. For example, I have bluetooth WQ-BC6 on my Isudar MCU GS.
Solution for 'Version unmatch' (I hope final)
I know that this topic has already been discussed many times in many threads (most in MTCD - Verified Cross compatible MCUs). I also know that there is a known solution to this problem. However, there are users who report that they still have a...
forum.xda-developers.com
Pavel-71 said:
To remove the beeping, try Mcu Unmatch Unlock. Button calibration and bluetooth settings are in factory settings. Choose your bluetooth type, if you don't know what you have, you have to try. For example, I have bluetooth WQ-BC6 on my Isudar MCU GS.
Solution for 'Version unmatch' (I hope final)
I know that this topic has already been discussed many times in many threads (most in MTCD - Verified Cross compatible MCUs). I also know that there is a known solution to this problem. However, there are users who report that they still have a...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks for the reply. I have already tried Mcu Unmatch Unlock and it doesn't work, it doesn't open the application, i have read that it doesn't work on android 10.
Button calibration and bluetooth settings I have already tried in factory settings, but it doesn't work either, the buttons don't even light up.
jack43 said:
Thanks for the reply. I have already tried Mcu Unmatch Unlock and it doesn't work, it doesn't open the application, i have read that it doesn't work on android 10.
Button calibration and bluetooth settings I have already tried in factory settings, but it doesn't work either, the buttons don't even light up.
Click to expand...
Click to collapse
It is possible that the update changed your customer version, if you originally had MCU 3.71_1, then the 1 at the end indicates that your subversion is 1. Check what your customer version number is. (Factory settings/ Other/ Customer version)
WARNING: If you change the initial values (up to 3) of this number in the factory settings, the buttons on the front panel may stop working normally, and above (more than 3) problems may begin until the absence of an image on the screen, respectively, I strongly recommend saving immediately after buying a new radio factory reset image to the dmcu.cfg file and additionally write / remember the native MCU firmware extension and subversion number. Source 4pda.
Pavel-71 said:
It is possible that the update changed your customer version, if you originally had MCU 3.71_1, then the 1 at the end indicates that your subversion is 1. Check what your customer version number is. (Factory settings/ Other/ Customer version)
WARNING: If you change the initial values (up to 3) of this number in the factory settings, the buttons on the front panel may stop working normally, and above (more than 3) problems may begin until the absence of an image on the screen, respectively, I strongly recommend saving immediately after buying a new radio factory reset image to the dmcu.cfg file and additionally write / remember the native MCU firmware extension and subversion number. Source 4pda.
Click to expand...
Click to collapse
I tried changing the customer version, I tried all 3 modes, but it still doesn't work. I do not know what else to do.
Thanks for your kindness anyway.