Related
Is there going to be any xda support on this? It's still trickling into Kmart stores right now. but if we are able to OC this, that would be great
Doubt it...
its a great little device for little cash. i bought one today after i heard. glad i did. was this or the bb chumby. this blows it away
Hey Pen --
Have you tried the Kindle app on it? I want an ereader that is bigger than my MT3G and I think one of these would foot the bill if I can find one. My local store only had one and it was on hold for somebody.
I am going to get a rain check today.
until they release the patch which allows the market to work i havent tried it. they should have the patch released by tomorrow
How is the screen?
How do you like the screen and how is its performance in general.
over all i like the device. im used to a resistive screen so thats not a problem. doesnt appear to have the auto rotate screen but waiting to hear back from them to find out what the deal is. the manual talks about auto rotating the screen so it should have it. lack of bluetooth is another draw back but i really dont need it. they also have a 2.5mm headphone jack on them instead of a 3.5 like normal but they are addressing that with an adapter i do believe.
power consumption wasnt too bad. i was using the device for 5 hours yesterday and only used a 1/4 reserve from what it said. so i was only down to around 72% charge after playing with it for 5 hours. was reasonably bright enough in a brightly lit room. the angle one can see is pretty good as well.
the microsd card slot isnt in line properly. so if you insert a card you will want to put a price of tape on the end of it so when you release it you can pull it out. i played hell getting the thing to pull out and it was dragging the top of the card so had to use a pair of tweezers to pull it out.
cant access the market yet so havent tried the nook or kindle apps but that will be my next thing. looking at pictures was good. just as good as my digi pic frame.
over all for what i bought it for i do believe it will work a treat. i was going to buy a chumby either the bb or the sony branded chumby and this will work so much better then either of those two devices.
Augen Tablet
Thanks for the info pen.
It surprises me that that it has a 2.5mm jack. I wonder how it ended up with that. You can get an adapter on Amazon or ebay for a buck or two. That would be important for me because I'd like to be able to watch movies on it when I am on the train to work. That is also why I am interested in the Kindle app.
Everything that I have read seems to indicate that it has an accelerometer to rotate the screen.
I get the feeling that Augen underestimated the interest this device was going to generate and put it on the market when it wasn't completely ready, thinking they could dabble a little and fix problems on the fly with the couple of people that bought them. oops.
My Augen Gentouch78 experience
I just picked up my Augen yesterday at the KMart here in Phoenix (KMart actually called me on my raincheck I had made over the phone! Kudos to them). I like the form factor but am quite disappointed overall. While I don't think it is sluggish in general, the resistive touch screen makes it seem that way. Using your fingernail or an old pda stylus helps considerably in that regard.
Couple of negatives:
1. Market download does not work, as others have pointed out (it just stays in the "Starting Download" phase.
2. Micro SD card is hard to insert/remove (you need to use your fingernail in both cases, and to remove you need to also flick it down a bit to slide out as it seems to catch on the lip of the slot).
3. The device could not "Mount" when connected to my PC via USB. I had better luck when the SD card was not in the device, as I was able to Mount it once then, and saw that I had 1.3GB of free space... even though the device SD card info showed only 246ishMB free... what's up with that? (documentation did say there was 2GB available, so the Mounted drive size was closer).
4. I lost sound twice.. had to power off to get it back (all sounds started coming out as loud white noise). Seems to occur when pressing the top front part of the frame... yup, near where the menu/home/back buttons are.
5. Percentage battery use shows that monitoring cellular network was using 57% of the battery, and suggested turning it off. However, you can't... network settings only have WiFi (I curiously did find a place where it prompted me to turn on Bluetooth, but I don't think it did anything).
6. I wanted to return the unit due to the sound problem, but wanted to clear out my google account info... the factory reset does nothing other than power off the unit, even though that is how they say to clear out all data including the google account data.
7. No auto-rotate. No rotate at all that I can see. Nothing in the setup relating to that, even though the manual says it should be there.
8. Non-US Standard earphone jack
9. No mic or web cam
10. Resistive touch screen makes typing on the on-screen keyboard a PITA. I did get somewhat use to it after a while, but still don't like having to press firmly.
On the positive side:
After manually copying a ripped DVD movie in mp4 format onto my SD card and inserting it into the unit, it played great.
So, first impressions are basically way down there for me.
Some other specs:
- Telechips TCC8900 ARM CPU (on an eval board no-less!)
- Android 2.1 - Update 1
- Build 2010-07-21 (boy did they push these out the door... likely with no testing!!)
Eric
whisper1980 said:
I just picked up my Augen yesterday at the KMart here in Phoenix (KMart actually called me on my raincheck I had made over the phone! Kudos to them). I like the form factor but am quite disappointed overall. While I don't think it is sluggish in general, the resistive touch screen makes it seem that way. Using your fingernail or an old pda stylus helps considerably in that regard.
Couple of negatives:
1. Market download does not work, as others have pointed out (it just stays in the "Starting Download" phase.
2. Micro SD card is hard to insert/remove (you need to use your fingernail in both cases, and to remove you need to also flick it down a bit to slide out as it seems to catch on the lip of the slot).
3. The device could not "Mount" when connected to my PC via USB. I had better luck when the SD card was not in the device, as I was able to Mount it once then, and saw that I had 1.3GB of free space... even though the device SD card info showed only 246ishMB free... what's up with that? (documentation did say there was 2GB available, so the Mounted drive size was closer).
4. I lost sound twice.. had to power off to get it back (all sounds started coming out as loud white noise). Seems to occur when pressing the top front part of the frame... yup, near where the menu/home/back buttons are.
5. Percentage battery use shows that monitoring cellular network was using 57% of the battery, and suggested turning it off. However, you can't... network settings only have WiFi (I curiously did find a place where it prompted me to turn on Bluetooth, but I don't think it did anything).
6. I wanted to return the unit due to the sound problem, but wanted to clear out my google account info... the factory reset does nothing other than power off the unit, even though that is how they say to clear out all data including the google account data.
7. No auto-rotate. No rotate at all that I can see. Nothing in the setup relating to that, even though the manual says it should be there.
8. Non-US Standard earphone jack
9. No mic or web cam
10. Resistive touch screen makes typing on the on-screen keyboard a PITA. I did get somewhat use to it after a while, but still don't like having to press firmly.
On the positive side:
After manually copying a ripped DVD movie in mp4 format onto my SD card and inserting it into the unit, it played great.
So, first impressions are basically way down there for me.
Some other specs:
- Telechips TCC8900 ARM CPU (on an eval board no-less!)
- Android 2.1 - Update 1
- Build 2010-07-21 (boy did they push these out the door... likely with no testing!!)
Eric
Click to expand...
Click to collapse
they are pushing an update out should be out tonight or tomorrow to fix a couple of the things. i believe the eval board is not correct as someone has found the chinese version of this and it has been out for a while. i just think the cooking of this device wasnt the best. i am just hoping they push 2.2 out on it pretty quickly.
I also got one today
I can confirm the market is not working for me either.. Yes build date is really new. haha.. I'm trying to get apps installed by emailing myself APK's to Gmail but I need something like APKatcher to do it. So so far I've not installed anything, but going into settings, aplications and manage I was able to kill the running apps and speed it up.
So far it's a cool little device. I also lost sound once and a reboot fixed it. haha (interesting) I watched 20 minutes of avatar and it looks incredible and gets much louder than a cell phone.. My 16GB MicroSD card went in fine.
There's a Stylus if you guys didn't figure that out yet. Makes typing extremely easy.
Anyone know how I can install some APK's?
ES File Manager comes Pre Loaded.. you can add any app APK to the SD card. and use ES File Manager to install
Installing Quadrant, and some games right now.. I'll post back
Rainchecks
I got two rain checks tonight. I want to get one for myself and I know my wife will want one if it is cool.
If anybody really wants one and lives in Eastern PA, they have 4 of them in the Reading PA store. That is a little far for me to drive and I like getting a rain check because I can make sure they are going to put out an update to make the market work.
It seems like the early reviews are mixed at best but c'mon...they are $150. I mean, if I can get my 6 year old to watch a thomas the tank engine video on it for a few minutes of peace each day, I have gotten my money's worth.
Dev thread here http://forum.xda-developers.com/showthread.php?p=7409528#post7409528
Well I got one yesterday and it is horrible.
I am hoping their support can help me get the screen a bit more responsive.
I mean I have to press on it like I'm trying to push through it.
The manual says there supposed to be a calibrations but there isn't.
The manual says there is an option to allow this to orientate according tot he direction held but theres not.
The manual says that when you charge the device the light should be red in color turning green when fully charged well I charged over night and its still red.
When I turn it on it says 100% battery...
Also I went into market which is like that on my Droid1, Incredible, Droidx... and chose to install a app like dropbox, weatherbug, MyMemo, SlingPlayer and it sis there saying downloading but its not.
I have my wifi connected to the device...
Anyone else with ideas???
I so wanted this to be a iPad alternative!!!
Thanks
I got one last night... I side loaded a bunch of apps from my Incredible... LauncherPro, Pandora, Quick Settings, Android System Info... Awesome Drop...they all work... The weird thing is some of the apps force the screen to Portrait, but i haven't found an app yet to turn it back.. (aside from rebooting)
I noticed the sound is wonky... sometimes it works...
I also noticed something installed called Dev Tools... It has a terminal, a bunch of dev settings, a package browser, sync tester, and some google tools..
I got one today as well. So far, all is not well.
Wifi seems to be an issue. I can connect to my network if I turn off security, but when I enable WEP, this thing just sits here and says 'Obtaining IP Address' and then shows 'Unsuccessful'. I have tons of other devices connected. The problem is not the network.
So, with security off, I played with it a bit. The browser seems to work fine. It defaults to mobile pages and I'd love to turn that off. No Flash as expected.
I also have a problem with sound. When anything produces sound (mp3, video, youtube, even clicking on something) all I get is horrible white noise.
I get constant alerts that things have failed to download. I assume that this is due to the Marketplace issue.
I threw in a micro SD that I had. I have no problems with it sticking as others have reported.
I will admit that this is my first taste of Android. I am a professional developer for other platforms though so I'm not a total knucklehead - just partial.
I hear that an update is imminent. Anyone have any info about this? Will it be done via the SD card? USB?
I REALLY want this to work
Greg
Update:
Looks like a reboot fixed a few things now. I am now connected to my secured network and sound is ok. So now I have a more or less functioning tablet.
You guys aren't having screen issues?
This is posted on the Augen website:
Patch for GENTOUCH78 Tablet (available 1700EST)
Dear Augen Customers (GEN Nation),
Thank you for showing your support and interest in our GENTOUCH78 Tablet. We became aware of the technical difficulties over the past 24 hours, and we will be posting an update for a patch to the software at the following link: http://augen.helpserve.com/ under latest download files within the next 48 hours.
Just to mention a few technical difficulties we have found and are patching are:
the memory size of 284mb not being shown as 2GB will be corrected as this is a glitch in the software.
Android Market place not being able to download apps will be fixed in this patch, as this is a glitch in the software. As of right now the operating system and pre-loaded applications are using .5 Gb so the available space displayed should be approximately 1.5GB.
To solve the issue with the headphone jack being too small for a 3.5 mm headphone connection, we ask you to send us an email to [email protected] with your Name, Adress, eMail Adress along with a proof of purchase. We will be sending you at our expense the 2.5 mm headphones to go along with the unit within 15-20 days. All future products that will be manufactured will have the new patch and a 2.5mm earbud to go along with the unit.
We want to make it a great experience for our customers. We apologize for disappointing some of you, and we are doing our best to make it a great experience at Augen.
Thank you for your support,
Daniel Gofman
Vice President
Augen Electronics Corp.
the screen sucks
I have been looking at an low cost tablet to tinker/play/abuse. I can't see spending 400-500 on a tablet that I will break/brick while playing around with. I was looking at the superpad/a8/flytouch2/etc, then I found the superpad2/flytouch3.
Anyone have any input or suggestions about this device.
I have had mine a week or so, which this is my first android device. I like it so far, but, not that many prople have them yet so I am afraid to start *tinkering*. I have been trying to find a official forum thread dedicated to the tablet, but cannot. The tablet runs froyo ok at most. The mic is awful, speakers are less output then my blackberry. The touchscreen could be somewhat more responsive. I am having a hard time rooting without a usb to usb. The tablet has some potential in the sense that it has 512 mb ram. The tablet does not run flash. I am waiting for someone to develop a honeycomb rom, which is tablet oriented.
hcdevils1 said:
I have had mine a week or so, which this is my first android device. I like it so far, but, not that many prople have them yet so I am afraid to start *tinkering*. I have been trying to find a official forum thread dedicated to the tablet, but cannot. The tablet runs froyo ok at most. The mic is awful, speakers are less output then my blackberry. The touchscreen could be somewhat more responsive. I am having a hard time rooting without a usb to usb. The tablet has some potential in the sense that it has 512 mb ram. The tablet does not run flash. I am waiting for someone to develop a honeycomb rom, which is tablet oriented.
Click to expand...
Click to collapse
I received mine today and I am having same trouble to root the tablet.
I have also a FLYTOUCH2 (now on sale) which I have easy rooted with Universalroot, but don't work with this one.
If you find a solution please let me know. I also want to root my tablet.
Thanks
dcoelho said:
I received mine today and I am having same trouble to root the tablet.
I have also a FLYTOUCH2 (now on sale) which I have easy rooted with Universalroot, but don't work with this one.
If you find a solution please let me know. I also want to root my tablet.
Thanks
Click to expand...
Click to collapse
I figured it out, but have not done it yet because the stupid usb to usb cord. All I have is micro and mini usb to usb.
First, you must declare your application as "debuggable" in your Android Manifest. To do this, go to the android website and go to devoloping then device. What I am not sure about is how to find the right driver for the ft3 that will allow you to see the system files and write to the android manifest file. If you are able to view and write to the android manifest, then that will enable the devolopers setting to actually enable the usb debugging. In essence, you have to enable the settings to enable the usb debugging. As soon as usb debugging is enabeled, then you can run Z4root.
Just ordered mine from Ebay last Sunday, so hopefully it will be here soon. Any estimates? I have a feeling there is a growing community for these tablets, because they really are a bang for your buck.
Well, it turned out to not be made by "Gnome" so I'm thinking we have all been shammed. Anyone that bought it, including me, has a knock off of a knock off in their hands. :/
Good Evening!
Any more progress with rooting this device?
I am having an impossible time trying to tether my Windows Mobile Phone to this device without Ad-Hoc Network Cababilities!
Thanks, Audi2Audi.
robsch said:
I have been looking at an low cost tablet to tinker/play/abuse. I can't see spending 400-500 on a tablet that I will break/brick while playing around with. I was looking at the superpad/a8/flytouch2/etc, then I found the superpad2/flytouch3.
Anyone have any input or suggestions about this device.
Click to expand...
Click to collapse
Why not get the nook?
-mark
I just received mine and in one week I manage to root it, there is a program will makes you enabling the USB debugging, after enabling the USB debugging then I used the z4root to root it. the program for USB debugging is in the market I forget it's name since I'm new to android but search fro "root" or "rooted" then try the programs for that.
but now I played with the system and it's stopped in android logo. I press the MENU button mean while I pressed the POWER ON button then the system interned the recovery mode which has a default process by automatic recovery only with out any interfering from my side. also it's not working.
Any body has an idea how to format it from the laptop?
Just an update:
I think this is the program to enable the USB debugging:
Button Savior (Root)
bukhaled said:
I just received mine and in one week I manage to root it, there is a program will makes you enabling the USB debugging, after enabling the USB debugging then I used the z4root to root it. the program for USB debugging is in the market I forget it's name since I'm new to android but search fro "root" or "rooted" then try the programs for that.
but now I played with the system and it's stopped in android logo. I press the MENU button mean while I pressed the POWER ON button then the system interned the recovery mode which has a default process by automatic recovery only with out any interfering from my side. also it's not working.
Any body has an idea how to format it from the laptop?
Just an update:
I think this is the program to enable the USB debugging:
Button Savior (Root)
Click to expand...
Click to collapse
I would post the links to a guide to successfully root this device and to the "official" (such as it is) tech support site for the Flytouch3 / Superpad 2. However, forums rules...
Contact me at [email protected] and I will forward you the links if you wish to have them...
djw
flytouch 3
apad tv has a forum for the flytouch, latest firmware has youtube working
usb debugging can be enabled threw one of launcher under advanced settings launcher pro or adw
can be unrooted with likes of z4unroot universal unroot
any android rom chefs willing to optimize unit
ebay has a few now with 8gb nand flash
im going to order one just for browsing videos, but the main reason resistive screen for my 5 year old be great to draw and play angry birds, external gps antenna booster good idea for car.
for price great tablet
JUST NEED A ROM CHIEF
don't know where else to post
i have purchased a flytouch 3 tablet.it has gps and needs an antenna which is external and a seperate piece.i would like to open the case and install an internal antenna.this antenna would still need to be powerful enough to grab the satelites (gps internal antenna available on ebay).don't know if this is doable,no electronics experience,just a thought.
then i was thinking of using the external space on the case from where the external gps antenna mount has been removed.i would like to connect a stronger dbs external(swivel)antenna to the wifi to extend my signal.
should you have a moment,thankyou.
i have a link on another computer,but if i remember,search for disassemble superpad 2.it has written instructions how to take apart the flytouch 2.there are two versions,one with screws and one without.mine has screws. i believe it to be the same case,minus the second tf slot.other take apart searches yielded little info.
to confirm, button savior and z4 worked for me to root.
flytouch 3 open instructions,from slatedroid, duno
Posted 20 December 2010 - 12:17 AM
Please be carefull when you open the device!
When you break your device, it's your problem
01. remove the 4 cover plates with a needle, then the 4 screws
02. you'll need a flat knife with a (about) 5mm blade
03. put the knife with the 5mm blade close to camera into the pad
04. lift up the display with the knife
05. lift up the display with a screw driver from inside the pen holder
06. unplug the touchscreen plug carefully
07. unplug the tft carefully
have fun!
poke around the same link and there are more instructions for the non screw version.as well as clips and tips.
Teardown
Hello guys, my first post here.
I bought mine on mar 26th from this store
ankaka . com
it was us$ 170 for the tablet + 25 for airmail shipping
I'm waiting for its arrival anything near 3 weeks and I'll post here
details when i will get hand on it.
For our friend who will install the internal GPS, please give us a kind
of teardown for the tablet with picutres!!
cheers, Denis
Sounds like an interesting operation...
Good luck & success!
Flytouch 3 has 5000mah battery, more nand (4gb), only one tft slot, froyo, usally comes with external gps antenna. I think there might be a option or two more that I missed. I believe these will become super popular if the hardware is generic enough, to warrent more development.
sent from "The Other Woman"
You can find firmware update here
Link for firmware is http://www.4shared.com/file/11HgaFfO/Disco_10inch_android22_2011031.html
To install the firmware, download the .zip on a PC from the link below. Extract the contents of the zip on a PC and copy the two files to the root directory of a formatted TF-Flash Card. The two extracted files must be placed in the root directory of the TF-card. Insert the card in to the Superpad2 FlyTouch3 and power on the tablet. The installation will be automatic.
Sent from my wwe10 using XDA Premium App
Screen ?
Hi guys,
I have Flytouch 2 so I am interested what is diference in screen responce comparing it to Fly2.
Is it posible to do any finger taps (not nails) or not?
Thanks
hi
i thoguht flytouch 3 suppose to have 512mb ram,
i use task manager, memory used is 32%, available is 254MB.
my kernal version is 2.6.32.9.
i see my total ram seem like only 300mb+, is it normal, is the rest of the ram lock up by system for graphic use?
hi,
the firmware update is for what purpose, to update which software and what improvement will it have?
thanks, i am quite a noob in android.
stupidy said:
You can find firmware update here
To install the firmware, download the .zip on a PC from the link below. Extract the contents of the zip on a PC and copy the two files to the root directory of a formatted TF-Flash Card. The two extracted files must be placed in the root directory of the TF-card. Insert the card in to the Superpad2 FlyTouch3 and power on the tablet. The installation will be automatic.
Sent from my wwe10 using XDA Premium App
Click to expand...
Click to collapse
Hi everyone,
I have a problem with Internet Explorer on my HD7
Since yesterday, Internet Explorer refuses to open from the start screen or Apps list. Clicking on web links in emails does not work, clicking on pinned web pages does not work. Live tiles, Emails, RSS feeds, texts, Phone calls etc. work as expected. I have downloaded several third party browsers which work as expected.
I have checked using 3G and Wifi connections, and soft reset multiple times to no avail
I have searched and have not seen anyone else reporting this problem which leads me to suspect it's a device specific software problem. I was following my normal morning routine yesterday, reading the emails with new and updated posts from XDA when it suddenly stopped opening the links in the emails. I tried opening up Internet Explorer and this too failed. The animation transition starts to take place when pushing the I.E. tile, and then it comes back to the start screen.
I am running 7720 and have not played around with the phone or changed anything to cause this problem.
Does anyone have any suggestions or thoughts before I go ahead and press the "Reset your phone" button ??
Thanks in advance,
Garrickus
Work around
Hi,
Got the same problem with no available solution till now.
I just have a workaround for you, disable in settings the "open links in new tab" and you should be able to use IE9 again afterwards.
Tabs will not work though.
I even read somewhere that hard reseting device will not solve the problem !!??
Do it or not and tell me if you find something.
Regards,
Thomas
Thanks
tlefeuvre said:
Hi,
Got the same problem with no available solution till now.
I just have a workaround for you, disable in settings the "open links in new tab" and you should be able to use IE9 again afterwards.
Tabs will not work though.
I even read somewhere that hard reseting device will not solve the problem !!??
Do it or not and tell me if you find something.
Regards,
Thomas
Click to expand...
Click to collapse
Thanks Thomas
I can confirm your solution does indeed work as you describe, and yes, tabs are now broken
I'm curious as to your firmware version and operator, as there may be a link ?
You say you read "somewhere" that hard resetting the phone doesn't fix the problem , (I haven't as yet done so myself, as I'm currently compiling word docs of Internet Explorer favourites etc. and uploading them to Skydrive so I can restore them later ) which implies someone else has also encountered this problem ?
If a hard reset doesn't work for me (I'm waiting on the weekend to do this as it'll probably take hours ) then I'm seriously thinking of upgrading the sdhc card to a 32gb one and flashing a custom rom
I'll keep you updated.
And once again, thank you for taking the time to reply , with well over a hundred views, I was beginning to think I was invisible
Garrickus
i would flash a custom rom (you have the requirements), its easy to do (just search for it) and the advantages of it are great. you would never want to go back to an official rom again.
I haven't heard of this problem before, and don't have a direct fix - I'd need to examine your phones in some detail to do so.
However, if you have a full-unlocked phone, or you have WP7 Root Tools, I'm releasing an app that can configure your phone to use a third-party app as the default beowser (on my phone, I'm currently using IE+, for example). There are some caveats - not all browsers will be supported, and not all of IE's features work on third-party browsers - but it should work to let you open links sent in emails or SMS or apps. They have tabs too (in fact, IE+ has better tab management than IE9; one reason I use it).
Glad to see it partially solved your problem ;-)
My device is a Samsung Omnia 7 with latest firmware and mango installed (do not have the disapearing keyboard fix).
I suspect either windowbreak interop unlock method or windows phone manager to be the culprit with our tabs problem. Are you interop unlocked ? Have you installed Windows Phone Manager ? Have you sideloaded any app ?
Sent from my OMNIA7 using Board Express
Thanks
GoodDayToDie said:
I haven't heard of this problem before, and don't have a direct fix - I'd need to examine your phones in some detail to do so.
However, if you have a full-unlocked phone, or you have WP7 Root Tools, I'm releasing an app that can configure your phone to use a third-party app as the default beowser (on my phone, I'm currently using IE+, for example). There are some caveats - not all browsers will be supported, and not all of IE's features work on third-party browsers - but it should work to let you open links sent in emails or SMS or apps. They have tabs too (in fact, IE+ has better tab management than IE9; one reason I use it).
Click to expand...
Click to collapse
Funnily enough, I hadn't heard of this problem either, before it manifested itself on my phone so it can't be widespread.
I'd love to allow you (you Windows Phone Guru ) access to my phone, if it would help me and the community, but, it's my main device and your too far away to visit
I have a stock phone so I doubt there is any kind of dump or something I can do to provide more clarification on the problem, but it's very real and very annoying
I had a quick search for "IE+" in the marketplace, but didn't see it. Could you provide a link please ? Or did you sideload it ?
If the hard reset doesn't work, my carrier has said they will swop it out for a refurbished unit, so I have a couple of options.
If I get my act together by the weekend, I might upload a video of the problem to YouTube for information purposes.
Also, my phone has been exhibiting some strangeness for a while now. Occasionally freezing up, then unfreezing itself. Internet Explorer freezing when the loading bar reaches 4/5's distance, and taking ages to finish loading. Some tiles (third party only) losing their images but not the text, or backing out of an app to the Start screen resulting in all the tiles being empty for a few seconds before filling in. Start screen flashing green and crackly looking. None of them particularly bothered me too much till now.
I'll keep you all posted.
Garrickus
Thanks
tlefeuvre said:
Glad to see it partially solved your problem ;-)
My device is a Samsung Omnia 7 with latest firmware and mango installed (do not have the disapearing keyboard fix).
I suspect either windowbreak interop unlock method or windows phone manager to be the culprit with our tabs problem. Are you interop unlocked ? Have you installed Windows Phone Manager ? Have you sideloaded any app ?
Sent from my OMNIA7 using Board Express
Click to expand...
Click to collapse
Yes, thank you. I was beginning to go mad with it lol.
I too am running Mango without the disappearing keyboard fix, but I am not windows broken, iterop or any other kind of unlock, or used any kind of programs other than Zune, so we don't have that in common I'm afraid.
Thanks anyway
Garrickus
IE+ is being published to the Marketplace this week, I think. There's a pre-release build of it available on this forum, but I'm not sure if that version supports the required behavior for be-the-default-browser support. I'm looking at other apps too (requires decompiling them, unless I can get a chance to talk to the developer, but that's usually easy).
However, if your phone isn't interop-unlocked, you wouldn't be able to use the switcher anyhow, though. It requires TCB (or "root") permissions, because it needs to write to the registry. It's possible to interop-unlock your phone (I have an HD7 myself), but you'd need to downgrade the firmware first.
The list of bugs you're experienced sounds like it *might* actually be some kind of defective hardware. The usual problem is the internal microSD card that is used for storage on the phone being defective or coming loose. There are a few other possibilities too, though. Unfortunately, trying to fix them yourself is likely to void your warranty, with no guarantee of success.
Video uploaded to Youtube
Hi all,
So my problem persists, and I am due to hard reset the phone to see if that solves the issue in the next couple of days. Before I do so however, I have uploaded a video showing the problem to Youtube for information purposes.
Lets see if anyone else is having the same problem, and if a solution exists.
Here's the link to the video
http://youtu.be/L0YIkCybvhg
If the hard reset doesn't work, my carrier have said they will swop the unit for a refurbished one. Does anyone have any experiences of this ? Are they like new ? Or beaten up a bit ?
Regards
Garrickus
More people reporting the problem on Microsoft answers forum
Hi everyone,
I checked the Microsoft answers forum and it seems Others are reporting the issue as well
I counted at least half a dozen posts with the same problem as myself here
http://answers.microsoft.com/en-us/...one&CurrentScope.Filter=&askingquestion=false
So far, the only advice offered is to hard reset the phone, with some users reporting this solved their issue. One user reported that although it solved their issue, now their phone tile doesn't work
Regards
Garrickus
After hard reset
Hey everyone,
So I hard reset my phone on Thursday
and as a result, Internet Explorer now works again as it should
I decided not to restore a backup, and set up the phone manually (which took about 3 hours ).
A couple of things I've noticed since -
Battery life seems massively improved , now reporting over a days use on a full battery. I'll keep an eye on this as before I was only getting about 14 hours.
Another thing I've noticed is the keyboard. Now when I type, it highlights the word it thinks I want to use in bold, and it definitely didn't do that before
I'll keep you all posted on how things go over the next couple of weeks, if any of the problems I reported show up again, but, fingers crossed, it's all good for now, and loving my phone again.
Thanks for all your input.
Garrickus
Have a question... Does Hard resetting the device keep the os updates ?? (Mango, etc..) Or do you have to apply them again afterwards ?
Thanks for your answer
Thomas
Sent from my OMNIA7 using Board Express
tlefeuvre said:
Have a question... Does Hard resetting the device keep the os updates ?? (Mango, etc..) Or do you have to apply them again afterwards ?
Thanks for your answer
Thomas
Sent from my OMNIA7 using Board Express
Click to expand...
Click to collapse
Yes it does.
Thanks !! Another and last question, does hard resetting keep the phone windowbreak interop unlocked ?
Sent from my MID74C using XDA
Too bad. I have this problem too. Last night after connect to public wi-fi and enter username & password in automatic IE pop-up.
You can't open IE if your setting of "Open links from other apps in" is "A new tab". If change this settings to "The current tab" you can open multi-IE for multi-tab but can't use normal tab.
I think I will HR my device too.
tlefeuvre said:
Thanks !! Another and last question, does hard resetting keep the phone windowbreak interop unlocked ?
Sent from my MID74C using XDA
Click to expand...
Click to collapse
No, interop unlocked will go away.
I am facing similar issue. I guess I know when it started (but not sure about it)
I had opened Google Search app. I was searching some images. In results displayed, I clicked 1 imgage. It opened Internet Explorer. When I tried to open "Tab" from Menu to close tab and exit IE, IE was simply not getting close and it was opening continously. I finally pressed Power button to switch off phone. After phone was restarted, I observed that while internet explorer is open and I open the tabs, it shows absolutely nothing, it doesn't show the tab for the page that is currently open or none of the other tabs that are open. Rather it shows Blank page with symbol to add new tab. But even new tab is not getting added. I tried several reboot on phone but somehow "Tab" thing is broken. I am also having feeling that Internet Explorer running in the backround that will not close even after a restart.
I dont want to Hard Rest Phone, but I think its only Solution for now. Hope MS fix this issue in WP7.8.
There is getting to be quite a bit of information to look through when looking for tip/solutions related to the new Joying 2GB / Sofia units. Since this is not a MTCB or MTCD unit, the threads seem to be scattered all over and very difficult to find in searching. I have seen roll-up threads for other units, that contain information such as ROMS available, tips, tricks and useful information. Kind of a "one stop shop" for the newer Joying HUs. If you have useful software, mod, tips, customization's, get something to work, etc please post here and I can include.
CPU Information - Rockchip Sofia x64 C3230RK / mali 450 GPU / Up to 1.2Ghz / 4 core / FYT5009 SoM - rated to run at up to 85C. My particular is unit clocked at 1.04Ghz.
Advanced Settings Password: 3368
Homescreen menu: 8086
Backlight Current menu: 5768
Android 6 Thread
https://forum.xda-developers.com/an...ing-intel-head-unit-android-6-update-t3597121
Android 6 specific tips:
ADB Access: https://forum.xda-developers.com/showpost.php?p=71616884&postcount=273 -OR-
https://forum.xda-developers.com/showpost.php?p=72057022&postcount=12
Viper4Android: https://forum.xda-developers.com/showpost.php?p=72064749&postcount=41
Latest ROM - Current ROM can be downloaded from link on the Joying blog site.
https://www.carjoying.com/Joying-blog/59.html
Android 5.1 Discussion about the Feb 22, 2017/March 5, 2017/March 15, 2017 updates:
https://forum.xda-developers.com/an...d-units/joying-intel-update-feb-22nd-t3561285
People have experienced issues with the Joying Launcher (UI3) after the update. This seems related to having other packages (google voice search ) installed prior to installing the ROM. Install time 25-35 minutes.
Recovery from non-bootable system - Without being able to access recovery, about the only solution is to reload the ROM package. Unzip ROM to SD card or USB stick, put in unit (GPS Maps slot, if using SD card ) and press the 'recessed' reset button. The unit should find the update and reload the ROM. This will wipe your data, but does leave the apps. If you use titanium backup, and have a backup, you can restore your data fairly easily. See blog article above for step by step instructions.
Root - Unit comes with root accessible in adb. SuperSU can be installed easily. There are 2 methods for installing superSU. The first method is an overwrite of the boot partition with a pre-rooted image. Problem here is if future upgrade makes boot partition changes, this method will overwrite with an older version. I recommend method 2, which modifies the existing boot partition ( need source so I can provide credit ).
https://forum.xda-developers.com/showpost.php?p=69648860&postcount=84&nocache=1&z=8361786322568856 (over-writes boot partition / may not work on Joying Feb update )
https://drive.google.com/file/d/0B4qmTV7N4JliSjZMdGg3Z18wbkU/view?usp=sharing ( modifies existing boot partition )
OS & Google Apps - Android 5.1.1 ASOP based w/ pico installation of google applications. Voice actions are supported with installation of 'Google App' from play store. No support for google search talk back.
Recovery- A recovery partition is present but does not have any type of graphical UI. It does look like a complete stock android ( command line ) recovery, but no access using USB is available. It maybe be possible using PC-PC OTG cable.
SD Cards - I have not heard of any sdcard size limitations, up to 200GB have been reported to work. Must be formatted as FAT32. NTFS, exFAT, and ext3/4 do not work. You can format a USB stick with ext4 and it will work fine.
Google Voice Calling - Stock BT dialer crashes when being called from google applications ( such as google voice search ). Workaround is available.
https://forum.xda-developers.com/an...oogle-voice-to-initiate-calls-joying-t3528923
Enable OK Google from any screen - https://forum.xda-developers.com/showpost.php?p=72447390&postcount=968
Bluetooth Tethering & BT Settings - Bluetooth tethering, connects instantly, very reliable connection, works great for streaming music, gps etc. Saves phone battery vs WIFI hotspot. Limited to ~2Mbs ( slower than WIFI sharing )
https://forum.xda-developers.com/an...elopment/bluetooth-settings-launcher-t3504526
(also good discussion here on the effects of process killing when entering standby )
Difficult to pair BT devices - Forces device pairing into database - Device pairs normally once HU thinks it has connected previously. I was able to pair TPMS, keyboard, etc using this method(s).
https://play.google.com/store/apps/details?id=com.brachcon.btautopair&hl=en
Modified stock bluetooth app to allow connection to all devices
https://forum.xda-developers.com/showpost.php?p=71280945&postcount=88
Backup Cam guideline mods - Make your lines match your camera view
https://forum.xda-developers.com/showpost.php?p=70325711&postcount=403
Apps not working after resume - The joying code will kill most applications when going into standby. This is really bad for apps that are supposed to be run at boot and background process, as they are not restarted when exiting standby. Symptoms include, widgets not updating, apps not getting GPS lock, process show running but background services are no longer running. This can be fixed by installing an updated apk file in /system/app/Sofia-1-C9-Server-V1.0 which removes the task killer. Also the key/button mods V2+ (below) will remove the task killer.
https://forum.xda-developers.com/showpost.php?p=71047452&postcount=62
Key/Button Mods - Extend the usefulness of your steering wheel keys and on unit buttons- V2+ also removes app kill on standby.
https://forum.xda-developers.com/an...-units/joying-2gb-steering-wheel-key-t3543390
If you just want to change the SRC button to call up google voice search, go here. ( also removes task killer )
https://forum.xda-developers.com/showpost.php?p=70480258&postcount=549
Immersive Mode / removes top navigation bar - No app needed - Full Screen on apps you choose, can be set from adb w/ root. Argument is list of package names separated by "," or "*" for all apps. ( survives reboot )
Specific apps:
settings put global policy_control immersive.full="com.google.android.apps.maps,com.pandora.android,com.spotify.music"
All apps:
settings put global policy_control immersive.full="*"
Clear / back to default
settings put global policy_control immersive.full=
Change Overscan - problems touching the corners, changing overscan can help:
https://forum.xda-developers.com/showpost.php?p=71492575&postcount=169
Phone/Tablet view on apps - No app needed - Change from 160dpi -> 161dpi gives "phone" view of many apps instead of "tablet" with no noticeable size change to other things. Done via adb. Requires reboot to take effect.
> wm density 161 # ( phone mode apps )
> wm density 160 # ( original tablet mode apps )
Heatsink mod Unit can run hot at heavy cpu load (such as benchmark testing). Can slightly reduce performance by throttling. Some users opt to add additional heatsink/fan to reduce temperatures.
https://forum.xda-developers.com/an...inside-look-joying-android-head-unit-t3546872
Red Themed Radio - Re-theme of stock apps - Don't like the look, change it. Can be done easily by unzipping the apk file, change images, rezip and install.
https://forum.xda-developers.com/showpost.php?p=70367793&postcount=434
More Radio Mods ( Layout change, more colors )
https://forum.xda-developers.com/showpost.php?p=71625005&postcount=286
xposed / xposed framwork - At this time, I am not aware of any way to make this work with the new Joying units. I have tried several packages and all have resulted in a non-bootable system. Please let me know you go get it to work.
Viper4android - Installer script that works on these models
https://forum.xda-developers.com/showpost.php?p=71317345&postcount=101
Nova or other launcher - Need to freeze or remove stock Joying launcher(s) in some cases, for other launchers to work correctly.
Other very useful Joying 2gb/sofia threads:
Audio Discussion / DACs - https://forum.xda-developers.com/an...ts/joying-2gb-sofia-headunits-common-t3577217
https://forum.xda-developers.com/an...pment/joying-android-5-1-1-2gb-units-t3465561
https://forum.xda-developers.com/an...opment/2gb-ram-intel-cpu-heres-specs-t3468322
Yes this is really needed. A FAQ with overview links and tips in just one post
Some people mentioned it was possible to boot into a restore function from a memory card with the update zip. If true, do we know what the exact process is? Any keys need to be held down?
Update, verified this procedure works:
sonof said:
I did recover from endless Android logo (resulting from trying to root with Joying HU root.zip found in this thread).
I did the following:
Put latest Joying update files to microSD card and insert it to GPS slot. Press and hold both reset and power buttons. Once it boots continue holding reset button.
This lead to automatic install of Joying update files and my HU was back alive but I hate the Joying company for not providing means to enter recovery and a complete ROM.
Edit: For me it did not ask if I want to update or not. It just began updating automatically. In contradict to the post above. But I was unable to boot to Android when I tried this.
Click to expand...
Click to collapse
My VW has reverse parking sensors. Does it not support those?
Just installed this unit. Speedwise it's night and day compared to my old Erisin (1gb 3188). Display is nice and crisp. Bit of a fiddle getting it mounted because of all the crap that needs to be stuffed behind it, but after some swearing and elbow grease I got it secured.
From the instructions, I cut an orange wire because I don't have a backup camera. I do however have optical parking sensors. On my Erisin this was supported (it showed a car model and visual indicators on screen). This unit doesn't appear to have this function. Can anyone confirm? I still get the beep from the speakers, so it's not really a big issue, but would be nice to know.
---------- Post added at 10:49 PM ---------- Previous post was at 10:49 PM ----------
catu said:
My VW has reverse parking sensors. Does it not support those?
Click to expand...
Click to collapse
Didn't see your post before asking the same question
anotheruserx said:
I'd like to work on this one.
But I have two questions;
1) did you manage to get any logs of how it failed?
2) When you made it unbootable, what was the exact procedure you used to recover the unit?
Click to expand...
Click to collapse
I didn't get any logs, as I couldn't connect to it until I reloaded the ROM. If I was able to make a USB connection, at least I could have looked at the logcat.
Procedure to recover: Insert USB drive with ROM, push recessed reset button, wait 30m for ROM to install, set up apps again. I have this procedure down pretty good. - The joys of playing with the system partition without USB access or recovery tools.
catu said:
My VW has reverse parking sensors. Does it not support those?
Click to expand...
Click to collapse
Actually, it turns out it does, however only when there's an obstacle (hopefully we can change this). Yesterday I only tested while stationary. Today I used it while driving, and noticed that whenever the sensor picked something up, the unit does actually display the sensors. It feels next to useless for me when it only shows on beeps, but at least we know it's there.
Well, that is the way my discarded Newsmy worked. Takes getting used to, but you then again you don't really need confirmation that "nothing" is in your way
Will need to think about this then, thank you.. Cant make up if I want this or the Ownice C500.
catu said:
Well, that is the way my discarded Newsmy worked. Takes getting used to, but you then again you don't really need confirmation that "nothing" is in your way
Will need to think about this then, thank you.. Cant make up if I want this or the Ownice C500.
Click to expand...
Click to collapse
After updating to the January firmware parking sensors are gone completely.
edit: enabling "radar" is the solution
Installed supersu (like described in this thread) yesterday and updated it from the play store. Worked fine.
Then I installed Viper4android, also from the store. I didn't expect it to work, but it does! Driver installed, and after a reboot it does exactly what it's supposed to.
Also installed Nova Launcher and set as default home. No issues with that so far. I have not frozen or uninstalled any of the original launchers.
On my Joying unit 130N2 (8 inch unit for VW) the backlight on the display does not work when it is cold. We had minus 8 degrees centigrade here and it took more than 10 minutes before the backlight came on. The radio is playing music and it is actually possible to change channel as long as you know where to touch the monitor. Today it was 5 degrees and it took only about 3 seconds before the backlight came on. I wrote Joying about it and they confirmed to me that there was an issue with 8 inch models for VW. They told me that they were working on a completely new firmware that would fix the problem. I told them that to me it seemed to be a hardware problem and how they wanted to fix that with a software. Their answer of course "No worry my friend ......". I told them that I wanted to return the radio because a radio that doesn't work when it is cold is useless to me. They told me that I would have to send it to China so that their engineers could investigate the problem. I then told them that I had bought it from a German website and it was delivered to me from Germany so if their wanted it to be sent to China then they would have to pay me for it - in advance. They told me that their warehouse in Germany did not accept any returns so it was impossible for me to return it. Then I opened a case with Paypal for selling defective merchandise. Then suddenly their warehouse in Germany was accepting returns. I had put this text also on the Joying Forum, but of course they deleted it. So when dealing with Joying and in case you have problems my advice is to be very tough on them otherwise they will BS you.
Kurt Lund said:
On my Joying unit 130N2 (8 inch unit for VW) the backlight on the display does not work when it is cold.
Click to expand...
Click to collapse
I have the same problem on the same unit. With the car headlights off, backlight is dim when it's cold, but gets brighter when it has time to warm up. And when the headlights are on, the backlight isn't on at all until it warms up.
I thought about writing Joying about it but I expected the kind of response you got. Plus, I've had my unit for a few months already so a PayPal claim isn't an option. Please let us know if you hear anything else about it from Joying.
Hi Joshnat,
Yes we have the same problem. Sometimes I can get mine to light up by turning the headlights on and off a couple of times. Are you sure that you cant make a Paypal claim? As far as I know you have 180 days.
Anyway, you should write to them and let them know that you know that many others have this problem.
Regards
Kurt
Kurt Lund said:
On my Joying unit 130N2 (8 inch unit for VW) the backlight on the display does not work when it is cold. We had minus 8 degrees centigrade here and it took more than 10 minutes before the backlight came on. The radio is playing music and it is actually possible to change channel as long as you know where to touch the monitor. Today it was 5 degrees and it took only about 3 seconds before the backlight came on. I wrote Joying about it and they confirmed to me that there was an issue with 8 inch models for VW. They told me that they were working on a completely new firmware that would fix the problem. I told them that to me it seemed to be a hardware problem and how they wanted to fix that with a software. Their answer of course "No worry my friend ......". I told them that I wanted to return the radio because a radio that doesn't work when it is cold is useless to me. They told me that I would have to send it to China so that their engineers could investigate the problem. I then told them that I had bought it from a German website and it was delivered to me from Germany so if their wanted it to be sent to China then they would have to pay me for it - in advance. They told me that their warehouse in Germany did not accept any returns so it was impossible for me to return it. Then I opened a case with Paypal for selling defective merchandise. Then suddenly their warehouse in Germany was accepting returns. I had put this text also on the Joying Forum, but of course they deleted it. So when dealing with Joying and in case you have problems my advice is to be very tough on them otherwise they will BS you.
Click to expand...
Click to collapse
You may have a faulty screen, my first one did something similar and wasn't very responsive to touches. I returned and my second unit was like night and day with how much better it looked and worked.
Has anyone got a factory backup camera to work? I have a 2015 Camry and right now I have the older Pumpkin rk3066 and the place that installed it hooked up the factory backup camera. I got my new Joying hu yesterday and am going to install tomorrow myself. I'm really hoping I can use my factory camera with this head unit also.
Sent from my LG-H918 using Tapatalk
mad212 said:
Has anyone got a factory backup camera to work? I have a 2015 Camry and right now I have the older Pumpkin rk3066 and the place that installed it hooked up the factory backup camera. I got my new Joying hu yesterday and am going to install tomorrow myself. I'm really hoping I can use my factory camera with this head unit also.
Sent from my LG-H918 using Tapatalk
Click to expand...
Click to collapse
I have the same car and HU, my oem backup carmera works. I bought a harness on Amazon including backup camera, USB, and aux in.
https://www.amazon.com/gp/product/B01BM3QGCO/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Quick tip:
You can adjust backup camera brightness, saturation and contrast by touching the screen while backup camera is on.
Is there a trick to putting in the sd cards? Mine won't click in so it won't mount.
Edit: Forget it i just had to get the edge of a screwdriver and push it in. Had me worried for a minute.
Sent from my LG-H918 using Tapatalk
Does anyone have a link or info on the dummy proof DIY on how to Root the joying unit? I want to install some of these enhancements so need to root the device and have never done it so was looking to see if anyone has a link or good write up for the slow like me. Appreciate it. I have a Joying 2gb 7 inch unit.
Looking to install this option
https://drive.google.com/file/d/0B4q...ew?usp=sharing ( modifies existing boot partition )
thedru13 said:
Does anyone have a link or info on the dummy proof DIY on how to Root the joying unit? I want to install some of these enhancements so need to root the device and have never done it so was looking to see if anyone has a link or good write up for the slow like me. Appreciate it. I have a Joying 2gb 7 inch unit.
Click to expand...
Click to collapse
Within the zip there is a file with instructions - HOWTO.txt
How-To install:
1. You need a Windows PC that is connected to the same WiFi network as your HU.
2. Unzip the attached file somewhere to your disk.
3. Run CMD.exe as Administrator
4. Change directory to the folder that you unzipped.
5. Run the install.bat script with an IP address of your HU as a parameter:
C:\Users\<username>\Downloads\Joying_JY-UL135N2_SuperSU> install.bat 192.168.123.137
6. Wait until script finishes and reboot your Head Unit.
7. DONE!
You should now have the SuperSU application working.
A friend has a stock S7 with a broken screen and USB debugging disabled.
I have read posts here about this situation and it looks like the prognosis is bleak, but it has been more than a year since the last one I found, and things do change with time as more is learned, especially on popular phones like the Galaxy line, so it seemed like a good idea to ask again. His wife has baby pictures on it that are worth a good bit to them. Why they weren't backed up to the cloud is anyone's guess - I get that some folks dislike sharing private lives with Google, but there are plenty of Boxcryptor type apps one can use - but the point is moot. They have their privacy and no baby pictures. It is what it is.
A quick Google search finds lots of proprietary software that claims that it doesn't need USB debugging to be enabled or that it can enable it, but the sparse details provided about this superhuman ability makes this seem unlikely.
Someone mentioned a way to sideload a custom kernel in order to somehow enable USB debugging via ADB. Is this possible? Can USB debugging be enabled from stock recovery on the S7, or any other route?
There are all sorts of Octopus / Miracle Box type gadgets and software packages that claim to make various phones dance and sing, but I can't find one that will recover files from the S7. It might be worth buying such a package, if it existed.
Some posts, articles and videos suggest using an OTG to connect a mouse or keyboard and navigate the broken screen, either from memory or by taking screenshots and retrieving them from phone storage. We have not tried this yet, and any tips specific to the S7 would be really appreciated.
Someone posted an application here, that is apparently intended to help with this situation, but mirroring a phone screen requires USB debugging to be enabled.
https://forum.xda-developers.com/showthread.php?t=2786395
Thanks to anyone who might be able to help, and I apologize for adding a redundant question. I am just hoping that there is something new in the Galaxy world that might have made this situation salvageable.
SmilingPerson said:
A friend has a stock S7 with a broken screen and USB debugging disabled.
I have read posts here about this situation and it looks like the prognosis is bleak, but it has been more than a year since the last one I found, and things do change with time as more is learned, especially on popular phones like the Galaxy line, so it seemed like a good idea to ask again. His wife has baby pictures on it that are worth a good bit to them. Why they weren't backed up to the cloud is anyone's guess - I get that some folks dislike sharing private lives with Google, but there are plenty of Boxcryptor type apps one can use - but the point is moot. They have their privacy and no baby pictures. It is what it is.
A quick Google search finds lots of proprietary software that claims that it doesn't need USB debugging to be enabled or that it can enable it, but the sparse details provided about this superhuman ability makes this seem unlikely.
Someone mentioned a way to sideload a custom kernel in order to somehow enable USB debugging via ADB. Is this possible? Can USB debugging be enabled from stock recovery on the S7, or any other route?
There are all sorts of Octopus / Miracle Box type gadgets and software packages that claim to make various phones dance and sing, but I can't find one that will recover files from the S7. It might be worth buying such a package, if it existed.
Some posts, articles and videos suggest using an OTG to connect a mouse or keyboard and navigate the broken screen, either from memory or by taking screenshots and retrieving them from phone storage. We have not tried this yet, and any tips specific to the S7 would be really appreciated.
Someone posted an application here, that is apparently intended to help with this situation, but mirroring a phone screen requires USB debugging to be enabled.
https://forum.xda-developers.com/showthread.php?t=2786395
Thanks to anyone who might be able to help, and I apologize for adding a redundant question. I am just hoping that there is something new in the Galaxy world that might have made this situation salvageable.
Click to expand...
Click to collapse
Try the solution in the link you've posted, i'm sure you no longer need debugging enabled.
Also the real issue is you need to unlock the phone, so if the screen is just black?? You can usualy guess where the patterns or numbers appear etc, easy if you have another s7 next to it.
Also other options here
cooltt said:
Try the solution in the link you've posted, i'm sure you no longer need debugging enabled.
Also the real issue is you need to unlock the phone, so if the screen is just black?? You can usualy guess where the patterns or numbers appear etc, easy if you have another s7 next to it.
"]here [/URL]
Click to expand...
Click to collapse
Thank you! This is very helpful.
I think debugging must be enabled for that solution, but I hadn't read far enough or close enough to find Msmtx's solution for enabling it from ADB.
https://forum.xda-developers.com/showpost.php?p=66731042&postcount=260
My blind spot now rectified, I am going to give this a try. I know nothing about stock recoveries - is the one in the S7 going to allow me to do this, or will I have to install or boot TWRP or Safestrap?
Thanks again mate, it will be great to get those pics back. I just hope they have learned from this the great value of backups...
Sent from my unknown using Tapatalk
Hi @SmilingPerson - Did you get this resolved? I'm facing the same issues, and on top of all the OTG ideas, the phone I need to access has a swipe lock, so I'm pretty sure connecting a mouse without seeing anything is useless. Would appreciate any tips.
I wish I could tell you something, but nothing worked, sadly, and I used the old phone for parts.
Good luck though, hope you fare better than I.