Sorry for making second topic but do yiu also realised wheb you instal more apps on your honor your fingerprint scanner sometimes does not work like it should?
That shouldn't happen. Unless you have multiple apps that require the use of the fingerprint scanner. What apps do you have installed on your device?
Nothing what requires fingerprint
Jjust get your phone checked by the service centre, because ur facing way more problems than u should with your fingerprint sensor, my sensor also sometimes fails to read my finger print but that happens only once or twice a day
I have many apps, the fp performance is still on point
This can happen with any Android device. Due to the way Android is coded performance drops once the device hits more then 50% storage used. Happens to every device.
Hi all,
I'm trying to locate the driver for the fingerprint sensor on the S7 G930F. I'm guessing when you go to *#0*# Sensor menu, the "Version" under Fingerprint Sensor version is actually the driver version since if you go to Sensor Info, it shows you a FW version.
I can't identify anything in particular in /sys/module
It doesn't appear to be in the kernel since with
ls /sys/module
I don't see anything there
There are two .so files
/system/lib/hw/fingerprint.default.so
/system/lib64/hw/fingerprint.default.so
Swapping these out though with versions from different Samsung ROMs doesn't seem to change the version displayed in the *#0*# Sensor Menu.
Thanks
Nevermind I found it.
For anyone wondering, unfortunately it is a kernel mode driver. It's the et320_spi.
It's an Egis ET320 sensor.
I have a problem with the fingerprint sensor.. Since I switched to miui 11 with android 10 the sensor worked at times. It works for a day or two, then the menu disappears from the settings and i can no longer use it.
I try tu update vendor partition, wipe data, format data, reinstall new rom with all wipes, reinstall stock rom with Mi FlashTool, any solution works..When i wipe all, it works for a while and than, suddenly, doesn't work anymore!!
I have Mix 2S, i'm sure that is not an hardware problem..
Replace fingerprint sensor
I don't know why you say that you're sure that it's not a hardware problem, but to me, it sounds like the sensor is broken. I suffered this issue in my own Mi Mix 2s and it was caused because the "cable" of the sensor was folded (it's not really a cable, it's more like a flat plastic connector) and it worked one day and not the next. I finally decided to fix it by myself, looking for a youtube video about disassembling the phone and with these tools and the replacement sensor it was pretty easy (and quite cheap, frankly). I hope it helps!
Kaliotto said:
I don't know why you say that you're sure that it's not a hardware problem, but to me, it sounds like the sensor is broken. I suffered this issue in my own Mi Mix 2s and it was caused because the "cable" of the sensor was folded (it's not really a cable, it's more like a flat plastic connector) and it worked one day and not the next. I finally decided to fix it by myself, looking for a youtube video about disassembling the phone and with these tools and the replacement sensor it was pretty easy (and quite cheap, frankly). I hope it helps!
Click to expand...
Click to collapse
I had the same problem. Mi mix 2s had a problematic/bad assembly line.
I have exactly the same issue. After Android 10 update the fingerprint sensor works for a while. After one day I recognized that the fingerprint sensor is not working anymore. And there are no options or settings in the system settings anymore. So I assume a software problem.
Jörg Krug said:
I have exactly the same issue. After Android 10 update the fingerprint sensor works for a while. After one day I recognized that the fingerprint sensor is not working anymore. And there are no options or settings in the system settings anymore. So I assume a software problem.
Click to expand...
Click to collapse
This problem is very boring!!! Have you try a solution, or a temporary fix???
No, I have no idea how to fix. Seems we have to wait till the next update from Xiaomi, which hopefully will fix the problem. It is really boring.
Jörg Krug said:
I have exactly the same issue. After Android 10 update the fingerprint sensor works for a while. After one day I recognized that the fingerprint sensor is not working anymore. And there are no options or settings in the system settings anymore. So I assume a software problem.
Click to expand...
Click to collapse
Your assumption is wrong... these options will not show up if the system can't find the fingerprint sensor... Had the same problem and it turned out to be a hardware fault, exactly like mentioned by Kaliotto. You can do a simple test via CIT (tap multiple times on kernel-version). You will find a fingerprint sensor check in there. If it does not find the sensor, it is broken, simple as that. Replacing the sensor is really no voodoo, did it in a timeframe of 30 minutes myself and it was really the first time I ever opened a smartphone. And the parts are really cheap.
cdfs said:
Your assumption is wrong... these options will not show up if the system can't find the fingerprint sensor... Had the same problem and it turned out to be a hardware fault, exactly like mentioned by Kaliotto. You can do a simple test via CIT (tap multiple times on kernel-version). You will find a fingerprint sensor check in there. If it does not find the sensor, it is broken, simple as that. Replacing the sensor is really no voodoo, did it in a timeframe of 30 minutes myself and it was really the first time I ever opened a smartphone. And the parts are really cheap.
Click to expand...
Click to collapse
I read on differents sites a lot of people who had problems with fingerprint sensor after upgrading to miui 11 with android 10..i don't think that all of us had hardware problem at the same time of the upgrading, it's very strange...
so, to avoid any doubt, i'm searching a new fingerprint sensor..the site suggested in the second posts seems to have problems with payment, any times i try to buy with paypal o credit card, the payment was refused..so i'm searching another reliable site..
I solved the problem. In my case it was defenitely a software bug. I tried to run the fingerprint test at CIT and the phone reminded me that the phone is protected by a PIN and can not enroll fingerprint information. So I switched of the PIN protection and the fingerprint test runs positive. Since that time, the fingerprint options in the setting was back again and I was able to setup the fingerprint sensor as usually.
So I thing the deactivation of PIN protection was the solution to get the fingerprint sensor working again.
Jörg Krug said:
I solved the problem. In my case it was defenitely a software bug. I tried to run the fingerprint test at CIT and the phone reminded me that the phone is protected by a PIN and can not enroll fingerprint information. So I switched of the PIN protection and the fingerprint test runs positive. Since that time, the fingerprint options in the setting was back again and I was able to setup the fingerprint sensor as usually.
So I thing the deactivation of PIN protection was the solution to get the fingerprint sensor working again.
Click to expand...
Click to collapse
So, you only disabled pin in the lockscreen (and set swipe method to unlock the phone)??
I tried now disabling pin and restarted the phone, but no options in the settings menu
Can you give me more details? Thanks
Update! After one day of use, I have to say, that the fingerprint sensor still does not work proper. After a while the fingerprint sensor stops working again. I played around with the settings, disabled the PIN protection and start the phone several times and than the fingerprint sensor was working again for a while. There is still something wrong. Also the CIT test sometimes pass and sometimes fail. Maybe it is hardware failure after all.
What I did: I disabled the password (PIN) protection, means no protection at all. After that I was able to run the fingerprint sensor test at CIT ( as cdfs wrote). This test was pass and the settings to configure the fingerprint sensor appears again in the system settings and the sensor worked for a while.
Since this procedure the function of the sensor is not consistent and I can not definitely say what to do to get it works. In the meantime I think that all the described workaround just works by accident.
NEWS: i changed stock kernel with two modded kernel (Twisted v22 && LawRun9.0_60hz) and fingerprint start to works again!!!
So, my idea was real: it's a software problem!!!!
Try it yourself and give me your feedback
Hi,
I had also the issue that the fingerprint sensor was not recognized. I replaced it.
Then the option was there again but it doesn't read any fingerprints.
The CIT test fails by the last step "Pixel open test"
Then I got a second new fingerprint sensor and replaced it again.
The test fails again in the last step!
These are the CIT messages:
Autotest: Testing
SPI test: Success
Reset pin test: Success
Interrupt pin test: Sucess
Pixel open test: FAIL
So I would say it is a Software Issue
Hello,
so I at the end found some users, having exactly that problem!
I bought a new sensor and changed it. Pixel Opem Test failed.
I bought another sensor with the same result: Pixel Open Test failed.
Is there a usefull solution?
Mi Mix 2s MiUi 12 xioami.eu
fefuzzo said:
NEWS: i changed stock kernel with two modded kernel (Twisted v22 && LawRun9.0_60hz) and fingerprint start to works again!!!
So, my idea was real: it's a software problem!!!!
Click to expand...
Click to collapse
I had a try with twisted kernel V28.
Unfortunately it dind't solve the problem for me
meeven said:
Hi,
I had also the issue that the fingerprint sensor was not recognized. I replaced it.
Then the option was there again but it doesn't read any fingerprints.
The CIT test fails by the last step "Pixel open test"
Then I got a second new fingerprint sensor and replaced it again.
The test fails again in the last step!
These are the CIT messages:
Autotest: Testing
SPI test: Success
Reset pin test: Success
Interrupt pin test: Sucess
Pixel open test: FAIL
So I would say it is a Software Issue
Click to expand...
Click to collapse
Hello currently I am using mi note 9 pro but I am having fingerprint issue there is fingerprint option missing I am not able to mange fingerprints. Plz somebody help me
I've just replaced the screen on my friends S5 Pro and currently don't have a working FP sensor. I've double checked and the sensor is seated correctly and there is nothing obscuring its little window on the screen.
I want to recalibrate the sensor, but cannot find a way to do this. All of the useful dialer hidden codes are disabled. It might be that doing a factory reset or re-flashing the full firmware would trigger the sensor to calibrate itself, however my friend spent days getting everything just how he likes things and says he'd rather live without the sensor than have to set everything up again and doesn't trust non-root backup solutions to work properly. He doesn't want to unlock his bootloader, so rooting is out of the question.
Does anyone know of any way to get into some kind of engineering mode on this phone to be able to force a fingerprint sensor calibration?
Robbo.5000 said:
I've just replaced the screen on my friends S5 Pro and currently don't have a working FP sensor. I've double checked and the sensor is seated correctly and there is nothing obscuring its little window on the screen.
I want to recalibrate the sensor, but cannot find a way to do this. All of the useful dialer hidden codes are disabled. It might be that doing a factory reset or re-flashing the full firmware would trigger the sensor to calibrate itself, however my friend spent days getting everything just how he likes things and says he'd rather live without the sensor than have to set everything up again and doesn't trust non-root backup solutions to work properly. He doesn't want to unlock his bootloader, so rooting is out of the question.
Does anyone know of any way to get into some kind of engineering mode on this phone to be able to force a fingerprint sensor calibration?
Click to expand...
Click to collapse
The fingerprint sensor went completely over the cuckoo's nest in my Umidigi S5 Pro for no apparent reason, now I can't use it at all. Any ideas?
Same thing happened to me shortly after an OTA update if I remember correctly... any luck with a fix thus far?
I have an issue on Samsung A515U
I already did factory data reset and upgraded to Android 11, nothing works.
I'm searching for firmware of Android 9 for this model and haven't found it yet.
Can anyone help me pls
Hello!
You can check the Samsung Fingerprint Sensor with Samsung Phone Code.
Just dial (like typing in a phone number) the Samsung Sensor Code: *#0*#
Then tap on Sensor, where you can check Samsung Accelerometer Sensor, Gyroscope Sensor, DL Magnetic Sensor, and Fingerprint Sensor.
In the Fingerprint section, Tap on “Normal Scan” and see which tests it passes and which one fails.
This is just an information, you can't repair or change anything.
Your plan to downgrade to an older android version is NOT a good idea.
They made very important changes (filesystem, security, framework structure....) in the newer versions. You might brick your phone and can't use it anymore.
To improve your fingerprint take a look at this postings Speed up fingerprint
Good luck!
Thanx for answering
I've already done what you mentioned and didn't work. I checked the sensor dialing that code and it seems to be good
Same issue here... did you get yours fixed yet?
same here, I do factory reset but no fix.
why this happen ?
solution: I went to a service store and they replace the sensor.
The test reports that the sensor is ok (all tests show as PASS), but I still get the "Fingerprint sensor calibration needed" message.
How can I calibrate the sensor? Where can I find the procedure?
dornfinger4 said:
Hello!
You can check the Samsung Fingerprint Sensor with Samsung Phone Code.
Just dial (like typing in a phone number) the Samsung Sensor Code: *#0*#
Then tap on Sensor, where you can check Samsung Accelerometer Sensor, Gyroscope Sensor, DL Magnetic Sensor, and Fingerprint Sensor.
In the Fingerprint section, Tap on “Normal Scan” and see which tests it passes and which one fails.
This is just an information, you can't repair or change anything.
Your plan to downgrade to an older android version is NOT a good idea.
They made very important changes (filesystem, security, framework structure....) in the newer versions. You might brick your phone and can't use it anymore.
To improve your fingerprint take a look at this postings Speed up fingerprint
Good luck!
Click to expand...
Click to collapse
yossidme said:
The test reports that the sensor is ok (all tests show as PASS), but I still get the "Fingerprint sensor calibration needed" message.
How can I calibrate the sensor? Where can I find the procedure?
Click to expand...
Click to collapse
Well this looks like a problem faced by most Samsung users after updating their phones. There is no exact way to fix this since Samsung is yet to release a fix to this issue.
But you can try this:
Change your lock, to swipe to unlock, which will delete your fingerprint data. Then set up your fingerprint lock again, rescanning your fingerprints like you did the first time you set your lock screen options.
I had/have the same issue after installing a backup of one A51 to another A51.
All runs fine, but the fingerprint.
Doing a factory reset -> fingerprint is OK and working.
Using the copy on the "wrong" phone -> fingerprint is NOT working
So it's no hardware issue, but I have not found a solution yet
Try to reflash the whole system with Odin and get the software from samfw