Hi everyone. I have a 8227L HU, android 10, 10inch for vw passat, full touch, chinesse, from Junsun, aliexpress.
I had some canbus problems, and the seller gave me the 8227L-8.bin file to update, now the canbus problems solved, but the radio tuner application is stucked, i cant change the stations, and i have no sound on radio. I tried to make the settings in factory service mode, but nothing. I think the firmware is not ok. Can someone help me with some advice? Or a firmware that is suitable for my device ? Thanks a lot.
Did anybody paired there obdlink mx or lx to dasaita Max px6 with succes? I tryed everything but nothing works. I want to use the app “ hybrid Assistant “. Does not work with cheap obd connectors.
Same here! Can't find solution. Also tried upgrading MCU and firmware
3 decades later? Anyone? Echo..... echoooooo.....
hi friend
I have px30 unit and iPhone 12 Pro max
after update iPhone tu iOS 15 my unit can't connect to iPhone hotspot
my unit search and find hotspot wifi.after try tu connect and set password not connect
any onw have this problem?
If it worked on the previous IOS version then this is obviously an Apple issue and you should consult the Apple forums.
VAHID said:
hi friend
I have px30 unit and iPhone 12 Pro max
after update iPhone tu iOS 15 my unit can't connect to iPhone hotspot
my unit search and find hotspot wifi.after try tu connect and set password not connect
any onw have this problem?
Click to expand...
Click to collapse
Try the procedure from message # 642:
[ROM][PX5][PX6][PX30][Q][10] Hal9k Mod v5 for MTCx/HCTx head units with Android 10/9/8/6
Hal9k Mod v5 based on Android 10 for MTCx HCTx Rockchip PX5 (rk3368), PX6 (rk3399) and PX30 (rk3326) head units Compatible MCU versions: MTCD_XXXX, MTCE_XXXX, MTCP_XXXX, MTCH_XXXX, HCTG_XXXX Firmware version: 5.0.0 (31.07.2021) Version of the...
forum.xda-developers.com
tnx.problem solved
Hi I have the same problem and tried the fix in Hal9k topic without solving ... It seems my Dasaita PX6 can't find the iPhone hotspot, but if I open Settings-> Hotspot then the Dasaita finds it and connects immediately ...
With Toyota Touch 2 with Go (original equipment) I never had any problems, as soon as I started the car within 20 seconds I was already connected without doing anything ... We are talking about 3 days ago, before mounting the Dasaita, in the meantime there wasn't any iOS updates come out so nothing has changed in the phone.
Hi!
I have recently installera a Px6 Dasaita in my Toyota Rav4 and i need some help.
I cant get my Phone Contacts to show when i click on Bluetooth Phone icon. Its blank , no contacts.
Anyone that have any good advice?
//Thor
I have lately installed an android headunit purchased from a local reseller on my Mazda CX-3 2018
the unit needs a canbus decoder to interface with the original car settings. and everything working fine besides the OBD2 port
when the canbus decoder is disconnected - obd2 works (connection to ecu is succesfull)
once the decoder is connected - all car canbus stuff work , but obd2 stopps working! - getting power but cannot connect to ecu
after going back to the seller he found out that the harness that is connecting to the canbus decoder is sending both canbus info and obd2 on the same wire (wtf!??!!?)
we found a single wire thats when connected - allows canbus connection to the headunit but kills obd2
once disconnected - no canbus to headunit but the obd2 returns to life..
Did anyone encounter such an issue before?
this is the closest product to what I have that I was able to find online -
8core TS18 UIS8581A android car dvd radio video radio player stereo with DSP apple carplay auto 4G sim card
www.alibaba.com
p.s if more info is needed ill be happy to provide it
thank you
I would have thought the error was either in the canbus decoder or the car's own canbus. Which Canbus decoder have you been supplied with, if you google its name and Mazda CX-3 do any clues come up with others having similar issues.
Sometimes these Canbus decoders work better with the head unit set to a different model or year. So pick another Mazda model or year of CX-3 and see if the issue is fixed.
crimsonSP said:
I just installed an android headunit purchased from a local reseller on my Mazda CX-3 2018
the unit requires a canbus decoder to interact with the original car setup. and everything works fine apart from the OBD2 port
when canbus decoder is disconnected - obd2 works (connection to ecu is successful)
once decoder connected - all car canbus stuff works, but obd2 stopped working! - getting power but unable to connect to ecu
after returning to the seller he found that the harness connected to the canbus decoder was sending canbus and obd2 info on the same wire (wtf!??!!?)
we found one cable connected - allows canbus connection to headunit but turns off obd2
after disconnect - no canbus to headunit but obd2 is on again..
Has anyone encountered such a problem before?
this is the closest product to what i have that i can find online -
8core TS18 UIS8581A android car dvd radio video radio player stereo with DSP apple carplay auto 4G sim card
www.alibaba.com
ps if more info is needed i will be happy to provide it
Thank you
Click to expand...
Click to collapse
is it still connected when installing the original dvd???
kommando said:
I would have thought the error was either in the canbus decoder or the car's own canbus. Which Canbus decoder have you been supplied with, if you google its name and Mazda CX-3 do any clues come up with others having similar issues.
Sometimes these Canbus decoders work better with the head unit set to a different model or year. So pick another Mazda model or year of CX-3 and see if the issue is fixed.
Click to expand...
Click to collapse
It seems to be a general mazda profile... Photo attached
I can try to select other car manufacturers, but do I need to stay within BNR manufacturer ?
Can it be possible a special decoder is needed for my car model?!
Google came up with nothing that sounds similar..
avtintellegent said:
is it still connected when installing the original dvd???
Click to expand...
Click to collapse
you mean the dvd drive ? its a separate module on my car then the screen.
the original dvd is connected - the original screen is not
I have an atermarket android head unit installed that needs canbus decoder to control car steering wheel buttons and all other canbus related stuff
it is enough the original car harness is disconnected from the decoder and obd2 works
crimsonSP said:
maksudnya dvd drivenya? ini adalah modul terpisah di mobil saya lalu layarnya.
dvd asli terhubung - layar aslinya tidak
Saya memasang head unit android atermarket yang membutuhkan dekoder canbus untuk mengontrol tombol roda kemudi mobil dan semua hal terkait canbus lainnya
cukup cabut harness mobil asli dari decoder dan obd2 berfungsi
Click to expand...
Click to collapse
I had a failure while installing the android screen in my Mazda CX 3. Then I removed the original Mazda DVD connector that was still connected and the result is that everything works fine
avtintellegent said:
I had a failure while installing the android screen on my Mazda CX 3. Then I unplugged the original Mazda DVD connector which was still connected and as a result everything worked fine
Click to expand...
Click to collapse
I get you!!!!! my dvd is connected.. I will try to disconnect it and update!!
my friend, thank you for the new hope
crimsonSP said:
aku mengerti kamu!!!!! dvd saya terhubung .. saya akan mencoba untuk memutuskan dan memperbarui!!
teman saya, terima kasih atas harapan baru
Click to expand...
Click to collapse
Yes, the DVD and monitor are separate. The Mazda unit consists of 3 parts including monitor, dvd, radio & amp. when the acc is active the ecu will read these 3 components, whereas when we plug in the android monitor we unplug it and connect the cable for the monitor and radio only then the dvd part is not touched at all, sorry my brother used translate it might be a bit confusing my words
avtintellegent said:
Yes, the DVD and monitor are separate. The Mazda unit consists of 3 parts including monitor, dvd, radio & amp. when the acc is active the ecu will read these 3 components, whereas when we plug in the android monitor we unplug it and connect the cable for the monitor and radio only then the dvd part is not touched at all, sorry my brother used translate it might be a bit confusing my words
Click to expand...
Click to collapse
I believe I understand you very good
I just confirmed the dvd player is connected
and is actually working with the headunit withing "car settings" app..
but I will gladly give it up for obd2 !!
Im taking the car back the the shop - they planned to get every available harness for the canbas decoder and test it one by one until one works 100%
I will ask them to try disconnecting the dvd
deleted
Disconnecting the DVD didn't help..
Any other ideas??
crimsonSP said:
Melepaskan DVD tidak membantu..
Ada ide lain??
Click to expand...
Click to collapse
do you have the video...?? what kind of problem do you have
avtintellegent said:
do you have the video...?? what kind of problem do you have
Click to expand...
Click to collapse
no I do not have a video..
but I think the issue is with the canbus decoder.
there seems to be a specific decoder model for this car model
the issue is the OBD2 port doesnt read ECU (it is getting power - and canbus voltages are good)
do you have a canbus decoder installed ?
if yes do you have an idea which model it is?
crimsonSP said:
tidak saya tidak punya video ..
tapi saya pikir masalahnya ada pada dekoder canbus.
sepertinya ada model dekoder khusus untuk model mobil ini
masalahnya adalah port OBD2 tidak membaca ECU (mendapatkan daya - dan voltase canbus bagus)
apakah Anda sudah menginstal decoder canbus?
jika ya apakah Anda punya ide model apa itu?
Click to expand...
Click to collapse
I've been using the BNR decoder canbus so far and have had no problems. when encountering problems, simply removing the original DVD connector immediately worked without problems
avtintellegent said:
I've been using the BNR decoder canbus so far and have had no problems. when encountering problems, simply removing the original DVD connector immediately worked without problems
Click to expand...
Click to collapse
wow.. I was really hoping another decoder will solve it.. now im not so sure
is there a chance you can send a picture of the decoder? (fully understand if it a hassle.. )
are you using the mazda-all-all preset for BNR ?
oh I think I may be still using the mazda amplifier.
I have not installed an aftermarket amp and some cables are going to a harness on the passenger side which I believe is responsible for backup camera and speakers
have you disabled this also ?
crimsonSP said:
wow .. Saya sangat berharap decoder lain akan menyelesaikannya .. sekarang saya tidak begitu yakin
apakah ada kemungkinan Anda dapat mengirim gambar decoder? (sepenuhnya mengerti jika itu merepotkan .. )
apakah Anda menggunakan preset mazda-all-all untuk BNR?
oh saya pikir saya mungkin masih menggunakan amplifier mazda.
Saya belum memasang amp aftermarket dan beberapa kabel akan dipasang di sisi penumpang yang menurut saya bertanggung jawab untuk kamera cadangan dan speaker
sudahkah Anda menonaktifkan ini juga?
Click to expand...
Click to collapse
s I just deactivated the original DVD only. for other features it works fine
avtintellegent said:
s I just deactivated the original DVD only. for other features it works fine
Click to expand...
Click to collapse
1
2. Backup camera .. video from DVD original and data can H & can L
3. Power socekt and data can
4. Power amp. And radio original