Did anybody paired there obdlink mx or lx to dasaita Max px6 with succes? I tryed everything but nothing works. I want to use the app “ hybrid Assistant “. Does not work with cheap obd connectors.
Same here! Can't find solution. Also tried upgrading MCU and firmware
3 decades later? Anyone? Echo..... echoooooo.....
Related
I updated the MSU and Seicane sent me a new system update. MCU is MTCE-2.65. After updating was complete i had lost my Bluetooth. WIFI works normal and all buttons around the HU is working normal Bluetooth is missing the device name and pass code that was there when it came stock. wont find my phone or odb2 adapter. I was wondering if there is a posiblity that it some how changed the Bluetooth settings?
Did you find a fix?
Hello Cody,
Did you get any feedback on this?
I've got the same problem on a MTCD GS unit, unresolved!
Richard.
Hi, i have a dasaita headunit like the title.
I would like to pair a mini controller bluetooth (similar at devices that we using with VR visor). The problem is that the headunit detect this controller in settings and in bluetooth app, but i cannot click on it. I read in the forum that is not possible connect device: only phones and OBD. There is any workaround? I have a rooted devices.
So I have a Rockford Fosgate PMX-BTUR(it's a universal steering wheel remote) but my dasaita doesn't see the remote at all, my Oneplus 7 pro does and it connects and works fine. Any idea of how to remedy this?
The remote doesn't have a pin number, just pair it.
I'm running Hal9k rom not sure if this matters
Mcu is 3.40.1
Maybe I have the wrong bt chipset set in settings? I don't get the chipset and how to find if they work or not.
Hey,
I'm struggling for a few days with my Joying Headunit. It is an SC9853i with 4GB/64GB (1280*720 EU-JY-UO134N4GS-H).
The MCU is 2019.09.09 11:04:47 JY_53_C63L_G23P48F64_Ver:1.0
I googled for the last 2 days and couldn't find a solution.
I'm trying to use Torque pro with a Carista OBD2 adapter.
Every time I try to pair the HU and the adapter the pin prompt won't appear.
It tries to pair but after a while it will just fail.
The Pin of the adapter is 0000. I tried setting the pin in the Bluetooth app to 0000 and 1234 but nothing changed.
In the android Bluetooth app the adapter doesn't even show up.
Before I used another OBD2 adapter and it paired just fine. Except that I couldn't use custom PID's in Torque pro.
This should be because of the old Adapter, so I changed to the Carista OBD2.
Here is a video to show the problem.
(Can't post it because I'm new here. I hope you understand my problem anyway.)
The HU is atm unrooted.
What are my options?
Thank you for your help.
Greetings
Philipp
I have the same problem with the same unit. Did you resolve this ?
How are you pairing the adapter? Joying seem to have hidden the Bluetooth menu in Android. I can actually pair my generic ELM372 one with Torque Pro, and it shows connection to the adapter but no connection go the ECU (not entirely sure what an ECU is)
By default joying software will only allow connecting to obd devices with either "obd" or "gooddriver" in its name. What does your adapter identify itself as when you try to pair to it?
Yes only cheap Noname Chinese elm clones work.
I had to purchase a USB connected OBD reader because of this restriction :-(
Hi folks, I just replaced the PX30 Android 10 core board with a PX6 Android 11 board in my Eonon headunit. The MCU version is MTCE_HT_V3.53_1. I was just wondering if there was any way to downgrade to Android 10, so I can use Hal9x? I liked it quite a lot when using the PX30 board. Is there anywhere I can find firmware for it too? I can't seem to find any for this MTCE_HT.
The new board also does not have drivers for the SD-GT936 bluetooth module in my headunit. Is there a way to install the drivers? If not, are there any recommended USB bluetooth adapters?
Thanks very much.