[ROM] LineageOS 13 for Redmi 3S [Land] (Unofficial) - Xiaomi Redmi 3s ROMs, Kernels, Recoveries, & Other

First thing first, I am not the creator or builder of this awesome RUM. The credit goes to unknown developer. Please pm me if you know the developer so I can mention him here and show some respect.
Features:
Better than any CM13 based ROMS for Land till date.
Calling, call log bug fixed.
Better battery backup.
Omitted Features:
DT2W (NBigD)
Fast-charging
Reboot to recovery
Downloads:
LineageOS 13 for Land
OpenGapps (Android 7.1,ARM64, Pico)
Magisk v19.0
Eximious Kernel (Tune with any kernel tuner you like)
Installation:
Press VolumeUP+VolumeDown and Power button simultaneously and reboot to recovery.
Recommended recovery TWRP-3.5 or here.
Wipe > Advance wipe > Data, Cache, Dalvik cache, System, Vendor & Internal Storage.
Format Data > Yes > format.
Go to mount > disable MTP
Reboot to recovery
Flash ROM > Wipe cache.
Flash Gapps (Android 7.1 > arm64 > pico)
Do not flash SU now.
Format Data.
Reboot.
Finish Android Setup, reach homescreen then reboot to recovery by holding Vol+ & Vol- with power button altogether.
For SU I recommend Magisk v19.0 or anything you wish.
Flash Magisk or any SU you want.
If you want to flash any custom kernel flash it now, its better flashing kernel right after flashing SU.
Recommended kernel : Eximious Kernel.
Wipe cache & dalvic cache.
Reboot
Done!
Enjoy!

Hi
This is great rom !! but for openGapps you need use the 6.0 version
And I wondering if you can install a newer android version ? this one is unsupported by some apps now

thanks for your message : can't DL Eximious Kernel ...thread seems to be closed

Related

[ROM] [AOKP] [4.4.4] - Galaxy ACE 3 LTE [UNOFFICIAL]

Galaxy ACE 3 LTE users, I represent you AOKP custom AOSP based ROM!
Everything is like CM11 from this thread i suppose : http://forum.xda-developers.com/showthread.php?t=2800259
You will need CWM from the CM11 thread in order to install!!!
GAPPS: http://forum.xda-developers.com/showthread.php?t=2608800
Download: https://mega.co.nz/#!Jk1XjJ5Q!4si-OqvZ3CYgRedBV91ieJcehJ-Tx6FO44ggQQMh8NE
INSTALLATION
1.Reboot into recovery
2.Wipe data factory reset
3.Format system
4.Flash Rom
5.Flash Gapps
6.Reboot
ENABLE ART(Need fresh install)
1. Reboot into recovery mode
2. Wipe data, cache and dalvik cache
3. Format /system partition
4. Flash cm11
5. Reboot
6. Enable ART
7. Reboot into Recovery
8. Flash Gapps
9. Reboot
This is for GT-S7275R
Attention: It is harder for me to support AOKP rather than CM so do not ask for updates, I' ll do everything i can
Don't forget to press "Thanks"!!!
PS: I am not responsible for any damage to your device
kostoulhs said:
Galaxy ACE 3 LTE users, I represent you AOKP custom AOSP based ROM!
Everything is like CM11 from this thread i suppose : http://forum.xda-developers.com/showthread.php?t=2800259
You will need CWM from the CM11 thread in order to install!!!
GAPPS: http://forum.xda-developers.com/showthread.php?t=2608800
Download: https://mega.co.nz/#!Jk1XjJ5Q!4si-OqvZ3CYgRedBV91ieJcehJ-Tx6FO44ggQQMh8NE
INSTALLATION
1.Reboot into recovery
2.Wipe data factory reset
3.Format system
4.Flash Rom
5.Flash Gapps
6.Reboot
ENABLE ART(Need fresh install)
1. Reboot into recovery mode
2. Wipe data, cache and dalvik cache
3. Format /system partition
4. Flash cm11
5. Reboot
6. Enable ART
7. Reboot into Recovery
8. Flash Gapps
9. Reboot
This is for GT-S7275R
Attention: It is harder to support AOKP rather than CM so do not ask for updates, I' ll do everything i can
Don't forget to press "Thanks"!!!
PS: I am not responsible for any damage to your device
Click to expand...
Click to collapse
Bugs?
Arcanister99 said:
Bugs?
Click to expand...
Click to collapse
I haven't tested it a lot yet, i think that everything is like in CM11
Didn't find anything major
For personal reasons the OP is not able to support this project.

[GUIDE] Flashing Custom rom in TWRP Recovery

Requirements
TWRP Recovery
Custom rom (ex. Stockrom)
Steps::good::good:
- Download this Rom and put it on your SD Card
- Go to TWRP recovery > Wipe > Factory Reset
- Go back to recovery and Tap Install
- Find the rom and install it
- Wait until its finish
- If it is finish then Tap Wipe Cache/Dalvik
- Reboot
- Wait until it opens
- Then Reboot again
- Wait until it opens
-Done
#WeAreTeamPussy
Credits:
XDA
Google
Team Win
CMA2 Team
Maximum Team
Android Matrix Team
Porting team etc.
I did like u said now my phone is booting for 1 hour.... Can you help me?

[GUIDE] How to Flash Custom ROM on OnePlus 6 (Enchilada) [Decrypted Devices]

Here is Simple guide for Flashing Every Android Pie or 10 on Decrypted Device..
Here I Prefer to Make Guide On Decrypted Device only Because Decrypted Device Giv's more flexibility while Switching ROM's.
Reasons are simple.. Flashing ROM over Encrypted device might Loose data if anything goes wrong..
For Decryption, Follow @HatRiGt Guide..
https://forum.xda-developers.com/oneplus-6/how-to/tutorial-decrypt-flash-rom-pie-oreo-roms-t3838643
Now Here is Steps to follow
When Flashing New ROM
Download OOS(Beta), TWRP 3.3, ROM, Gapps, Magisk 20, No-Verity-Treble zip & Copy them into Device
Reboot Into Recovery
Wipe > Advanced Wipe > Select Cache, System & Data & Swipe to wipe it
Flash OOS, TWRP & Reboot to Recovery
Flash OOS, TWRP Again & Reboot to Recovery
Flash ROM, TWRP & Reboot to Recovery
Flash Gapps, Magisk, No-Verity-Treble & Reboot to System
Done
When installing New Update
Download ROM Update ZIP, TWRP 3.3,, Gapps, Magisk, No-Verity-Treble zip & Copy them into Device
Reboot Into Recovery
Flash ROM, TWRP & Reboot to Recovery
Flash Gapps, Magisk, No-Verity-Treble & Reboot to System
Done
Few Point's to highlight
1. This Guide is Strictly for Decrypted Devices..
2. Follow Exactly Same Steps & Flash Exactly same ZIP's for avoid Potential data loss..
3. Flashing Magisk is totally upto you. Flash it if you want to keep rooted(You migh need it if you pay Google Pay as SafetyNet not passing on Android 10 & need module to fix it)..
4. Use No-Verity-Treble zip only from this Post as One Given in @HatRiGt Guide is only for Pie Based ROM's.. Attached ZIP is Working on Both Android 9 & 10.. Don't complain/Blame me if you did something wrong..
<Mod edit - removed>

Can´t Install Any Custom ROMs Please Help [BOOTLOOP]

Hello, so, my problem is same as title says.
I´ll try to write it as short as possible.
I tried to install Resurrection Remix, Lineage OS, Arrow OS, BootLeggers ( All are unofficial builds for my Redmi 6 ), but everytime I got the constant rebooting bootloop, so I need to go to TWRP and flash Official MIUI ROM
Here are my installation steps for Resurrection Remix ( Pretty same as In this Tutorial ) :
1. - I went to TWRP ( LR. Team TWRP 3.3.1 )
2. - It was showing Internal Storage (0MB), so I click on Wipe - Format Data - yes
3. - After that also Wipe - Advanced Wipe - I selected Dalvik / ART Cache, System, Cache, Data, Vendor
4. - I moved RR Flashable .zip file and Magisk v19.3 from my PC to phones Internal Storage (via USB Cable)
5. - I clicked on Install - RR-P-v7.0.2-20200111-cereus-Unofficial.zip - Add more zips - Magisk-v19.3.zip
6. - After that, I clicked on Wipe cache/dalvik, checked if I´ve got any errors and clicked on Reboot
7. - After that, phone started to restart around every 5 seconds until I went to TWRP and Installed Official MIUI ROM
BONUS. - Tried also on second try to flash MIUI Firmware before RR .zip file, but the results were same.
Also I don´t want Gapps in my phone so i didn´t flash them.
With other ROMs it was same, always bootloop. Here are all .zips, links to forums, tutorials that I followed.
So please message me what´s the issue, especially while installing Resurrection Remix, because this is the ROM that I would like to install the most.
I know it's too late for reply I'm just posting this so that others (like myself) can see this. Lets keep the community for this phone alive!
Install MIUI V10.4.4.0 (I found that this version works for me), Disable DM verity (https://forum.xda-developers.com/t/...ncrypt-disk-quota-disabler-11-2-2020.3817389/) and finally wipe data and install your custom rom.
It will bootloop on the first boot so wait a few seconds then force reboot

Shaco OS ROM V1

HOW TO INSTALL
- Copy the files you downloaded to PC or OTG.
- Reboot your phone to recovery mode
- Install your device's OrangeFox recovery
- Flash the included repartition script
- Format data (Ofox's menu > Manage Partitions > Data > Format Data)
- Wipe data, dalvik, system and cache
- Flash ROM file
- Reboot to system
- Wait for one minute and force reboot (Press and hold Power and Volume down button)
DOWNLOADS
Version:1.0
Mod Edit: DL link removed
CREDITS
1. @PingVN
2. @Astrako
3. @neel0210
4. @bien2004official
5. @el0xren
6. @DAvinash97
7. @xXJhunrey7870Xx
8. @TheRealModder
9. @GonicTEAM
all normally in ROM
ImperadorGusta said:
all normally in ROM
Click to expand...
Click to collapse
Please check your PM inbox. Thank you.
ImperadorGusta said:
HOW TO INSTALL
- Copy the files you downloaded to PC or OTG.
- Reboot your phone to recovery mode
- Install your device's OrangeFox recovery
- Flash the included repartition script
- Format data (Ofox's menu > Manage Partitions > Data > Format Data)
- Wipe data, dalvik, system and cache
- Flash ROM file
- Reboot to system
- Wait for one minute and force reboot (Press and hold Power and Volume down button)
DOWNLOADS
Version:1.0
Link Download
ShacoOS ROM.zip
drive.google.com
CREDITS
1. @PingVN
2. @Astrako
3. @neel0210
4. @bien2004official
5. @el0xren
6. @DAvinash97
7. @xXJhunrey7870Xx
8. @TheRealModder
9. @GonicTEAM
Click to expand...
Click to collapse
Nice original work but next time you can ask me before adding the build.prop tweaks
Still, really appreciate the effort
Mention Rom Features
Any screenshots?
What Magisk should be flashed? Stable 23.0 and canary doesn't work ;(
Thread closed until proper kernel source provided. Sorry for the inconvenience.

Categories

Resources