Related
[ROM][UNOFFICIAL][8.1.0][treble][mido] LineageOS eXtended 15.1 [Closed for posts]
Thread closed as requested by Developer. Hopefully he opens one soon for everyone to use
Rom download https://androidfilehost.com/?w=files&flid=256804
Change Log - https://pastebin.com/raw/zEH3kdjK
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS eXtended is a free, community built, aftermarket firmware distribution of Android 8 (oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS eXtended is based on LineageOS and the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS eXtended does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS eXtended is available in the LineageOS eXtended Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Source Code:
https://github.com/LineageOS-eXtended
What's working :
Boots
RIL (Calls, SMS, Data)
Fingerprint
IR Blaster
Wi-Fi
Bluetooth
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
GPS
Volte
Known issues:
You Tell me
Instructions :
Download the latest build and GApps
Reboot to recovery
Flash the latest build and GApps
Reboot
Downloads :
Twrp for Treble builds (will work with normal builds too)
Custom magisk for treble enabled builds v16.4
Un-Official build [Nightlies]: https://androidfilehost.com/?w=files&flid=256804
MIUI Camera (For Slow Motion Video Capture)
GCam (UriKill Version) - For better HDR+ photo capture
Credits :
Alexey711 - Rom Compiler / Developer
XDA:DevDB Information
LineageOS 15.1 eXtended Redmi Note 4, ROM for the Xiaomi Redmi Note 4
Contributors
p3dboard, p3dboard, alexey71
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Miui 9 8.5.x or later
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: https://androidfileh
Stable Release Date: 2018-05-05
Created 2018-05-07
Last Updated 2018-05-07
First.
Screenshot please
Akibtech said:
First.
Screenshot please
Click to expand...
Click to collapse
Done, I just added a screen shot of the Settings, showing the Build number, and also of the Advanced Settings for adjusting the flash light.
There's a Youtube video https://www.youtube.com/watch?v=ZFx21b-oT1c that explains the extra features of this over LineageOS
(Moved from LineageOS thread)
Magisk Module - to change some defaults - values listed below. Just allows me to turn off Noise Cancellation for Video recording, use fluencepro instead of regular fluence Noise Cancellation and enable EIS by default.
Verified that the getprop command from a ADB shell returns the new values. Looks like the Module is working
Build.prop additions
Code:
# Add EIS and disable noise cancelation
persist.camera.eis.enable=1
#use fluencepro instead of fluence
ro.vendor.audio.sdk.fluencetype=fluencepro
#turn off noise cancellation for audio recordings
persist.vendor.audio.fluence.voicerec=false
Charging speed slow or Normal,
Because Many oreo rom charging very slow like 500mh - - 1200mh
bujing2 said:
Charging speed slow or Normal,
Because Many oreo rom charging very slow like 500mh - - 1200mh
Click to expand...
Click to collapse
Normal, I've never seet it jumps to 2k but it was playing at 1.8-1.9
Backups - Btw, if anyone wants to get SMS Backup, Call History Backup etc, going on Oreo, and you have Root Access (Magisk Root as an example), then you can get it going by opening up a Terminal Window (get Terminal App from Google play).
Then from the terminal run
Code:
su
bmgr run
bmgr backupnow --all
Once its completed, do a reboot, and you'll notice that in your Backup Status, your SMS's, Call Logs, Device Settings etc are now backed up. They should now backup once every 24 hours to your Google Drive, for use if you need to restore your device.
Last time I tried an Oreo Rom, it wasn't backing up, and at that time, I didn't know how to fix it. So I went back to MIUI for a while, so I had the auto backup (yeah I could have used an application for SMS backup, but I wanted the OS to do it )
Dolby Atmos & ViPER4Android work properly or not?
Downloading rom.
Is it based on abhishek? If not, is it enforcing selinux?
amnher said:
Is it based on abhishek? If not, is it enforcing selinux?
Click to expand...
Click to collapse
Not sure, but I guess that because its got LineageOS as its source with extra's on top, if abhishek has contributed to the LineageOS Gerrit than that might be true. Since its a Russian Developer, you would probably have to ask on the 4pda.ru forum to get an exact answer.
At the moment, seLinux is in permissive mode, so its not enforcing.
p3dboard said:
Not sure, but I guess that because its got LineageOS as its source with extra's on top, if abhishek has contributed to the LineageOS Gerrit than that might be true. Since its a Russian Developer, you would probably have to ask on the 4pda.ru forum to get an exact answer.
At the moment, seLinux is in permissive mode, so its not enforcing.
Click to expand...
Click to collapse
Hows the thermal problem on network?
amnher said:
Hows the thermal problem on network?
Click to expand...
Click to collapse
I have only just started using the rom, but haven't experienced any issues yet.
According to Alexey's change log of recent activities, on the 2/5/2018 he "Updated thermalconfig" - so maybe that's the fix for the issue?
05/05/2018
Corrected copying to MicroSD (for example, QuickPic application or stock gallery)
Added setting "Notification display time" (Settings - Applications and notifications - Notifications - Pop-up notifications)
Added "Notification transfer time" setting (Settings - Applications and notifications - Notifications - Pop-up notifications)
================================================== =====================================
05/04/2018
Fixed crash bluetooth after reboots
================================================== =====================================
05/03/2018
Corrected the disappearance of the fingerprint, if you place another Treble core
Added patch cameras, for 60fps and from the dark video. Thanks FaXiR http://4pda.ru/forum/index.php?s=&showtopic=833225&view=findpost&p=72042322
Removed the animation of Android R. Use Ethans, as for me, even more beautiful and there is no bug
WiFi 2.4GHz - now can connect at a speed of 150Mbps
Removed warning "Not compatible image of vendor ...."
Updated the kernel to 3.18.108
================================================== =====================================
05/02/2018
New Diode Driver
Updated thermalconfig
================================================== =====================================
05/01/2018
The firmware was transferred to TREBLE.
It is necessary to make a clean installation with System-Data wikis (Data format is desirable at once) - Vendor - Cache
p3dboard said:
I have only just started using the rom, but haven't experienced any issues yet.
According to Alexey's change log of recent activities, on the 2/5/2018 he "Updated thermalconfig" - so maybe that's the fix for the issue?
05/05/2018
Corrected copying to MicroSD (for example, QuickPic application or stock gallery)
Added setting "Notification display time" (Settings - Applications and notifications - Notifications - Pop-up notifications)
Added "Notification transfer time" setting (Settings - Applications and notifications - Notifications - Pop-up notifications)
================================================== =====================================
05/04/2018
Fixed crash bluetooth after reboots
================================================== =====================================
05/03/2018
Corrected the disappearance of the fingerprint, if you place another Treble core
Added patch cameras, for 60fps and from the dark video. Thanks FaXiR http://4pda.ru/forum/index.php?s=&showtopic=833225&view=findpost&p=72042322
Removed the animation of Android R. Use Ethans, as for me, even more beautiful and there is no bug
WiFi 2.4GHz - now can connect at a speed of 150Mbps
Removed warning "Not compatible image of vendor ...."
Updated the kernel to 3.18.108
================================================== =====================================
05/02/2018
New Diode Driver
Updated thermalconfig
================================================== =====================================
05/01/2018
The firmware was transferred to TREBLE.
It is necessary to make a clean installation with System-Data wikis (Data format is desirable at once) - Vendor - Cache
Click to expand...
Click to collapse
Ethans Animation really beautiful and fast
Where is the latest update link OP is little confusing.
G camera- recording 60fps without dark video, or not
bujing2 said:
G camera- recording 60fps without dark video, or not
Click to expand...
Click to collapse
You have to have sufficient light to get 60fps. Under dark / low light, the video gradually gets darker, as the Camera doesn't let in enough light to do that high a FPS except in bright conditions.
The only way to overcome that is to use Open Camera, and set it to Manual Exposure mode, then you can drop the FPS recording to say 15fps, and up the ISO to 1600, decreasing the shutter speed. Xiaomi Miui has something automatic that drops the FPS to increase the brightness with its Camera module.
But under bright / outdoor light, you can get close to 60fps. Today I got 58.5 fps in my test.
haravtar said:
Where is the latest update link OP is little confusing.
Click to expand...
Click to collapse
"instructions : download the latest build"
what is confusing...
haravtar said:
Where is the latest update link OP is little confusing.
Click to expand...
Click to collapse
I've updated the 1st post, hopefully its a bit clearer to you now - There's an AndroidFileHosts.com site that contains the rom builds.
Dolby Atmos & ViPER4Android working in this rom?
bujing2 said:
Dolby Atmos & ViPER4Android work properly or not?
Downloading rom
If you're flashing the combined zip of foly and viper I don't think viper will work but the dolby will.
---------- Post added at 08:47 AM ---------- Previous post was at 08:43 AM ----------
Does this rom has snap camera because we can record 120fps slow motion on it.
Click to expand...
Click to collapse
MIUI Camera v2 - from Mi A2 series
Working on Oreo and Pie (TWRP or Magisk), with packages for AOSP and MIUI based ROM.
Test version includes files from BDD Camera booster patch for gcam fix (front and rear module) by BeatByDad (his work is based on RN5patch from nHappyMan).
For full compatibility (with also gcam support) use build.prop_edits addon to change build.prop
Gcam version suggested
Info:
For AOSP
From dumps of Mi A2, the Camera app works on Lineage 15.1 with the help of some libs, so I've made my module to use it on Los. Thanks to others finding I've now found my perfect combination of options and quality so far.
I've solved sound issue and made a fingerprint shutter toggler (TWRP only) that works system wide.
Note: The camera don't needs camera2 api but works with it enabled too.
For MIUI
The MIUI packages are a simpler version because there is no need to install another camera, stock one is already MIUI Camera v2. The mod just enables more functions in the stock app (you can see from the function list what is enabled and what is stock).
there is no need for camera sound fix or fp shutter toggler here since it's al managed by MIUI.
Depending on the MIUI version there are more function like 60fps available.
Link github repo:
AOSP - MIUI
Functions:
in italics options added (not enabled in stock MIUI Camera for whyred)
PHOTO
AI mode
Portrait mode
Full manual mode (1/4s max shutter)
Square mode
Panorama (full quality)
Peak focus (when manual focus)
Grid toggle
Scene modes
Tonal and color presets
HHT
Straighten
Tilt-shift
Group Selfie (works good only when phone is horizontal)
Beautify and Beautify pro (v2)
Timer (3s and 5s)
HDR (on, off, auto), HDR pro (default) and live HDR
Torch mode (back and front)
Increased burst shoot (100 pics)
Better lowlight shot
VIDEO
4K record (30fps)
1080p 60fps
Video image stabilization (software, not with 4K)
Slow motion 720p,120fps - 1080p,120fps (last one, only AOSP)
Time lapse
AUDIO
Camera sound toggle
Increased aac bitrate
ADD-ON
Fingerprint shutter toggler (system wide)
Editor for build.prop with TWRP package
Known Issue:
group selfie partially working (good when taking horizontal shot).
1/2 shutter take faster speed pic at nearly 1/6s
On indian models front filter not working (for now disabled because not supported by miui camera, new version supports it)
audio fix disables system camera sound (so they don't work with camera apps that uses them like snap camera)
TWRP package need to be reinstalled after a dirty flash or ROM updates (it gets uninstalled by doing that so can be done to remove the package)
systemwide fingerprint act as a selector when out of camera app (set your camera icon up left in home screen to have fp quick shortcut to camera too)
other camera patches (for examples some gcam patches) can reduce functionality (test without any other patches if having problems at first).
Install:
Select installer you prefer:
- Magisk if you have it installed and want easy install/uninstall and OTA survival
- TWRP if you want to keep system rootless (need to be reinstalled after a dirty flash or a ROM update).
and select:
- AOSP if on Lineage or any AOSP based ROM
- MIUI if you are on a MIUI based ROM
Install Magisk modules in magisk (from magisk repo too) or TWRP (on your choice) and reboot;
For TWRP installer make a backup of system and vendor in TWRP to uninstall. Also dirty flash ROM will restore system and vendor as before installing the package.
For Magisk AOSP since v0.20 you can choose to install FPShutter_toggle also, to enable system wide fingerprint shutter. It's on a separated module so people can chose if enable it and use it on other ports too.
Note: A second install of FPShutter toggle will revert back files as before disabling the module (uninstall), so next time only need to update Camera module/installer.
If camera don't start check permission, try to clear app data (it will reset permission too).
If still not working wipe cache and dalwik from TWRP.
Download:
LAST STABLE RELEASES - AOSP or MIUI, TWRP or MAGISK
Additional packages:
For fingerprint shutter toggle (AOSP only, MIUI not needed):
Since v0.20 Fingerprint Shutter is a separate TWRP installer, so can work on other ports too.
FPShutter_toggle-TWRP_0.4 <--install from twrp ( once, if reinstalled it will revert the mod.)
tip: I have camera icon in up left corner of home screen so when tapping on fp it get selected another tap opens camera and third tap shoots a pic.
For build.prop edits:
Since the package don't need any build.prop on most system but I like to have some set. I came up with that TWRP package that can survive OTA and dirty flash.
It will backup original system/build.prop to system/build.prop.bak and edit prop saved in system/etc/build.prop_edits.sh.
So to use your config just change content in build.prop_edits.sh relative to props and recompress the package.
build.prop_edits-TWRP_v0.2.zip
TEST releases:
AOSP-TWRP:
TEST:
- MiCamV2_whyred_v1.0.3d.zip
- AOSP-TWRP_MIUICamerav2_v1.0.2_TEST
TO PROPERLY TEST AND AVOID ERRORS: DIRTY FLASH ROM AND WIPE DALVIK AND CACHE
MAKE A TWRP BACKUP TO BE SURE TO BE ABLE TO RESTORE IF SOMETHING GOES WRONG!
WARNING! If the ROM already includes MiCam as stock, updating the app with the test package can give errors.
To avoid any update error before installing the test package manually delete:
Code:
/system/priv-app/MiuiCamera
/data/data/com.android.camera
Then restart system and after install test module from twrp.
Changes:
1.0.3 Unity installer (universal for TWRP-Magisk-MIUI-AOSP) with Stable and Test version plus options to install various patches (RN5CP v1.015 or 1.035; BBDCB v3.1 or back only) and also included fp shutter fix (optional)
1.0.2
- New apk (from jasmine miui 9.6.16 with some patches by me),
- AI mode in front cam and portrait restored for testing (but don't work so can be keept off),
- restored tilt-shift (with some gcam mod can have shutter in preview),
- beautify 3d,
- 1080p 60fps
- 720p 240fps HFR
- new advanced portrait mode with scenes and AI,
- enabled indian filter,
- test support 32s shutter for india model (reported not working),
- front cam, back camera and 1080p fix for gcam by BeatByDad (included BDD camera booster v3.1),
- seems that google photo now enables unlimited free storage for full size pic like pixel (not confirmed)
- more under the hood options enabled.
Bugs:
- wrong preview in manual mode if manual shutter is set to any value.
- Shutter is enabled to go till 32s but max shutter is 1/4s (for global/china models) till we find how to patch lib.
- 240fps in HFR works only 720p (sometimes gives errors)
- front portrait is broken by BBD camera booster front cam fix, not yet found a solution.
MIUI-TWRP: no plans for now
Magisk: will be TWRP only
Magisk repository:
Latest Magisk modules are both in magisk repo choose the one you need based on system in use.
To find them easily search for "whyred"
If MIUI based rom use: MIUIcamera v2 MODs for whyred (Redmi Note 5 / pro) MIUI;
if AOSP based rom use: MIUIcamera v2 PORT for whyred (Redmi Note 5 / pro) AOSP.
Credits:
I saw the works of @carlosggb and @ARNOB XENON and from them I've took the slow-mo fix by @Dyneteve and some video recording improvements inspiration also applied with magisk the sound fix by @lawong.
The audio recording fix by @rocker00 is not anymore supported and on some ROMs it gives problems.
Other people working on improving our camera have inspired and helped this work to be done: @jhenrique09, BeatByDad, nhappyMan and others...
Changelog
V1.0.1 Restored AI scenes, fixes for TWRP packages.
V1.0 Stable version, disabled not working good: AI mode, Group selfie, Tilt-shift (AOSP only), India filters.
v1.0_RC7 AOSP: Removed build.prop edits - MIUI: Fix incorrect module description.
v1.0_RC6 Removed TWRP addon.d support cause errors, added config files from beryllium for 3D beatify.
v1.0_RC5 Fix permission errors, revert build.prop camera aux support for some gcam.
v1.0_RC4 Added more options, fixed [email protected] on MIUI.
v1.0_RC3 Small repo fix. Addon.d fix
v1.0_RC2 Disabled HFR [email protected] for MIUI and removed audio recording fix (issue on some pie ROMs).
v1.0_RC1 Added HFR [email protected] and better video quality record, other minor fixes.
v0.21 Fix for magisk repo.
v0.20 Re-add Camera Sound Fix in camera, only FPShutter as external module. First update from Magisk repo.
v0.19 Add super resolution in MIUI build, removed audio fix and FP shutter from magisk AOSP (made separate modules).
v0.18 Revert to h264, mod watermark in all version, added build.prop edit (for pie support).
v0.17 Added more libs, HEVC codec, removed age&gender, obj. tracking and magic mirror from AOSP cause partially or not working; enabled asd night. Edited watermark.
v0.16 Removed better lowlight shot causing system FC.
v0.15 Revert camera sound toggle fix.
v0.14 Better lowlight shot, magisk module updated.
v0.13 Cleanup, new camera sound fix and first version for Oreo Pie and MIUI
v0.12 Removed tick sound and other small fixes (disabled super resolution, tele and night asd)
v0.11 Fixed FC on some ROM, Added super resolution, tele and night asd, parallel process options. Enabled back camera AI feature. First TWRP version.
v0.10 Granted needed permissions by default.
v0.9 Fixed video start and end record sounds.
v0.8 Added audio recording fix by @rocker00, restored group selfie (for test).
v0.7 Removed all devices but whyred, set default HDR pro (back) and auto (front).
v0.6 Enabled portrait mode (after LineageOS fixed the issues).
v0.5 Added initial support to Mi A1, Mi 6X, Mi A2/lite, Redmi Note 3, Redmi Note 4.
v0.4 Fixed system camera shutter sound (by @lawong), enabled magic mirror and age&gender, full size panorama and effects.
v0.3 Enabled slow motion (by @Dyneteve ), image stabilization and FP shutter. Disabled portrait mode.
v0.2 Disabled AI (gives no visible differences) and zoom options (sometimes use the worst camera).
v0.1 First test porting from Mi A2 camera with more functions.
Older releases:
GITHUB PAGE
AOSP packages:
Magisk module AOSP:
v1.0
v1.0_RC7
v1.0_RC6
v1.0_RC5
v1.0_RC4
v 1.0_RC3
v1.0_RC2
v1.0_RC1
v0.21
v0.20
v0.19
v0.18
v0.17
v0.16
v0.15
v0.14
v0.13
v0.12
v0.11
v0.10
v0.9
v0.8
TWRP installer AOSP:
v1.0
DOWNLOAD TWRP v1.0_RC7 <-- removed restore after updates (not working)
DOWNLOAD TWRP v1.0_RC6 <-- removed restore after updates (not working)
DOWNLOAD TWRP v1.0_RC5 <-- to test restore after updates
DOWNLOAD TWRP v1.0_RC4 <-- to test restore after updates
DOWNLOAD TWRP v1.0_RC3 <-- to test restore after updates
DOWNLOAD TWRP v1.0_RC2 <-- to test restore after updates
DOWNLOAD TWRP v1.0_RC1 <-- to test restore after updates
DOWNLOAD TWRP v0.21 <-- to test restore after updates
DOWNLOAD TWRP v0.20 <-- to test restore after updates
DOWNLOAD TWRP v0.19 <-- to test restore after updates
DOWNLOAD TWRP v0.18 <-- to test restore after updates
DOWNLOAD TWRP v0.17 <-- to test fingerprint shutter
DOWNLOAD TWRP v0.16 <-- to test dirty flash support
DOWNLOAD TWRP v0.15 <-- to test dirty flash support
DOWNLOAD TWRP v0.14 <-- to test dirty flash support
DOWNLOAD TWRP v0.13 <-- to test dirty flash support
DOWNLOAD TWRP v0.12 <--added addon.d (should survive rom updates)
DOWNLOAD TWRP v0.11 (TEST PACKAGE) <--based on this one by @[email protected]
note: TWRP package fixed thanks to feedback and testing by @Saabu and @woland_ca
MIUI packages:
Magisk module MIUI:
V1.0
DOWNLOAD V1.0_RC7
DOWNLOAD V1.0_RC6
DOWNLOAD V1.0_RC5
DOWNLOAD V1.0_RC4
DOWNLOAD V1.0_RC3
DOWNLOAD V1.0_RC2
DOWNLOAD V1.0_RC1
DOWNLOAD V0.21 <--UNINSTALL PREVIOUS VERSION BEFORE INSTALL
DOWNLOAD V0.20
DOWNLOAD V0.19
DOWNLOAD V0.18
DOWNLOAD V0.17
DOWNLOAD V0.16
DOWNLOAD V0.15
DOWNLOAD V0.14
DOWNLOAD V0.13
TWRP Installer MIUI:
v1.0
DOWNLOAD v1.0_RC7
DOWNLOAD v1.0_RC6 <-- removed ROM update support
DOWNLOAD v1.0_RC5 <-- to test if survives OTA
DOWNLOAD v1.0_RC4 <-- to test if survives OTA
DOWNLOAD v1.0_RC3 <-- to test if survives OTA
DOWNLOAD v1.0_RC2 <-- to test if survives OTA
DOWNLOAD v1.0_RC1 <-- to test if survives OTA
DOWNLOAD V0.21 <-- to test if survives OTA
DOWNLOAD V0.20 <-- to test if survives OTA
DOWNLOAD V0.19 <-- to test if survives OTA
DOWNLOAD V0.18 <-- to test if survives OTA
DOWNLOAD V0.17 <-- to test if survives OTA
DOWNLOAD V0.16 <-- to test if survives OTA
DOWNLOAD V0.15 <-- to test if survives OTA
DOWNLOAD V0.14 <-- to test if survives OTA
DOWNLOAD V0.13 <-- to test if survives OTA
Looks promising! Awesome buddy and thanks for share, wished i can give a try but....MIUI user is here.
I'm so interested in this part "Full manual mode (1/4s max shutter)", Please tell me what are the files or the modifications which are responsible for this so i can give a try, i think it's about libs but i am not sure!
Edit: Ohh i thought it's 4s not 1/4s, i already have max 1/2s...any chance for even 8s? redmi note 4 already got 32s https://forum.xda-developers.com/redmi-note-4/how-to/guide-long-exposure-redmi-note-4-redmi-t3657343
rocker00 said:
Looks promising! Awesome buddy and thanks for share, wished i can give a try but....MIUI user is here.
I'm so interested in this part "Full manual mode (1/4s max shutter)", Please tell me what are the files or the modifications which are responsible for this so i can give a try, i think it's about libs but i am not sure!
Click to expand...
Click to collapse
On MIUI you should be able to have same results only by editing /system/etc/device_features/whyred.xml
you can not use the one in this module because I've removed lines not for the camera that MIUI needs, but you can see from it what I've changed and added. For group selfie you need also the libs libmorpho_group_portrait.so and libmorpho_groupshot.so
you can put them in /system/lib64/ they are here
for the manual functions the line in whyred.xml is:
Code:
<!--whether support manual focus/exposure_time in camera CHANGED-->
<bool name="support_camera_manual_function">true</bool>
It's 1/4s max because 1/2 is not true at least on Los. If you compare pic taken with 1/4 and 1/2 you will see 1/2 is darker it's more like 1/6 in reality. For more shutter speed I'll start to try after monday to edit the libs.
Yeah i already have all of this, while you're reply i just edited my post.
About shutter speed, from what i gathered from the link i posted above it looks like it's all about this lib "libmmcamera_whyred_s5k2l7_ofilm_cn_i.so" for the global version
and i think imx for the Indian version, we need someone with proper skills in decompiling .so files so he can brings this mode...lets see!
i go to magisk manager -> moduls -> and press the + select the zip then i get that errror message
- Copying zip to temp directory
! This zip is not a Magisk Module!
or do i have to flash this with twrp ? im really new to magisk
Edit: DOWNLOAD Latest Release used this 0.9 version
_JaSoN_ said:
i go to magisk manager -> moduls -> and press the + select the zip then i get that errror message
- Copying zip to temp directory
! This zip is not a Magisk Module!
or do i have to flash this with twrp ? im really new to magisk
Edit: DOWNLOAD Latest Release used this 0.9 version
Click to expand...
Click to collapse
It was an error, now uploaded right file. :good:
v0.9 DOWNLOAD
Excellent work! Any chance of getting the HDR to work with flash? thanks
hmm not working for me app force close im on magisk v16.0
rom lineage-15.1-20180814-nightly-whyred-signed.zip
hey, can you make it a a normal flashable zip and not a magisk module?
I have latest ressurection remix with camera 2 api and gcam, which works great, but this app crashes at launch (flashed succesfully via latest Magisk). Any idea what is the issue?
On android pie i got a bootloop! ?
Sent from my Redmi Note5 using XDA Labs
carstenheuer said:
On android pie i got a bootloop! ?
Click to expand...
Click to collapse
This is for oreo
Bootloop on masik 2.4
_JaSoN_ said:
hmm not working for me app force close im on magisk v16.0
rom lineage-15.1-20180814-nightly-whyred-signed.zip
Click to expand...
Click to collapse
matthies00 said:
I have latest ressurection remix with camera 2 api and gcam, which works great, but this app crashes at launch (flashed succesfully via latest Magisk). Any idea what is the issue?
Click to expand...
Click to collapse
have you give all permissions?
------------
working fine on RR latest build.
fingerprint is working.
haven't tried group selfies.
only still experiencing delay/lag when switching modes or enter the settings, just like the other 2 ports.
guess it's a rom problem.
Yes, app cant even start anyway...
Working smooth on aex 5.8
60 keeps stoping. always this warning when open
matthies00 said:
Yes, app cant even start anyway...
Click to expand...
Click to collapse
have u tried the other ports? have any problem with those?
of those worked, well, I have no idea then.
mine on RR and gcam active also, and have no problem.
both runs normal.
maybe you could pull some log so the dev might know what's going on.
---------
edit :
something weird happened, don't know if it was a bug.
after I update derp kernel to v2.2, this module suddenly force close. (log attach)
so I revert back to previous version (derp v2.1). still force close.
tried to remove the module and flash it again, still force close.
tried to disable gcam, re-flash the module, still force close.
then I'm flashing derp v2.2 again, flash the other port (from carlos) in magisk manager, reboot, the port runs fine.
then I disable that port, while flashing this module in magisk manager, reboot,
and now this module runs normal, no force close.
delete the other port while enable gcam, reboot, now both working normal again.
I have no idea what was happened, lol.
Project Pixel P1.0
What is Project Pixel?
Project Pixel is a small team of developers that work on porting most, if not all of the Google Pixel features to stock firmwares.
We mostly specialize in Stock Samsung Firmwares, although we may do work on ports of OneUi once in a while. Our objective is to deliver the best performance by using stock firmware whilst also improving upon it by debloating and tweaking whilst also giving you all the features of a Pixel device.
IMPORTANT: MUST USE ASF3 PATCHED TWRP MAGISK FOR IT TO WORK!
Pixel Pie 1.0 Feature List:1. AdAway
2. Deep Debloat and DeKnoxed (Apps, permissions, framework, unnecessary features-stripped and removed)
3. Dolby Atmos with Correct Tuning and Gain (Main Speaker has most power and Earpiece just adds detail and treble)
4. Eleven Music (Lineage OS 15.1)
5. Files GO (File Manager)
6. GCam (Note: GCam might not work on all devices, because of hardware compatibility) Version is 6.0
7. Google Calculator
8. Google Calendar
9. Google Chrome
10. Google Clock
11. Google Contacts
12. Google Keep (With Handwriting Libs)
13. Google Lens (Works within Google Photos and Recents in Pixel Launcher)
14. Google Messages
15. GPay (Working Payment Method along with NFC functionality)
16. Google Phone
17. Google Pie Emojis (Not Samsung Ones)
18. Google Play Games
19. Google Tasks
20. GBoard
21. Mtweaks (Has Hardware Control - Similar to Kernel Adiutor but more tailored to Exynos)
22. Pixel Fonts
23. Pixel 3 Boot Animation
24. Pixel 3 Live Wallpapers with Normal Wallpapers
25. Pixel Google Photos (Free Original Quality Storage)
26. Pixel Module V1 - Pixel Animations, framework and configs.
27. Pixel Launcher with new recent menu
28. Pixel Sounds
29. Samsung Digital Wellbeing
30. Samsung App Lock
31. Samsung Gallery (Stripped Down and lightened to improve performance)
32. Samsung's Stock Camera with HDR parameter changes, debloated and additional video modes (4k30 at HDR- Not Fully Tested)
33. SystemUI Tuner (Provides battery stats along with other useful customiztions - Check QS icons and add it to QS Panel to view)
34. VoLTE Supported
35. YouTube Vanced (Ad-free Youtube)
CHANGELOG 1.0:
initial release
Bugs:
None
Notes:
1. To view Battery Stats and Storage, pull down the Quick Settings Panel and on the top right click the three bubbles button and then Button Order. Then move the new Battery and Storage icon to the Quick Settings.
2. Make sure you set Google Phone as your default phone app. Go-to Settings/Apps. Click the three dots in the top right corner. Then click default apps. Then Calling App and select Phone.
3. After first boot, reboot your device once to ensure dalvik optimization.
INSTALL INSTRUCTIONS:
- As the ROM zip doesn't contain any kernel, is mandatory to have the linked TWRP installed. (Please flash the correct ones)
- For people coming from other ROM than stock, please do a clean flash
- Copy the ROM zip to your phone
- Boot in TWRP and flash the ROM zip
- After flashing the ROM zip, goto Reboot --> Recovery
- Wait for the boot up (5-7 minutes) and setup your ROM to your liking.
- Don't try to update magisk or you'll get a bootloop. If you just tried and got bootloop, reflash the twrp patched with stable 19.3 magisk (link above).
Download Link and Sources:
Feel free to join us telegram via the group: https://t.me/joinchat/G-BflEMjGlgp1NeWxDA2bA
Correct TWRP: ASF3 TWRP with Magisk!!
Download Link 1.0 (MEGA: https://mega.nz/#!HepyDQIB!iytUlAoW9bEQmo4rWiQ1gZDIwTD-fQHmwUaOfNlhj6M
Magisk:https://github.com/topjohnwu/Magisk/releases
Kernel Source:http://source.samsung.com/
Credits:
Google for Android and Framework
Samsung For Their Kernel
i am rooted on asg8 how do i install it?
Zer0byZer0 said:
Project Pixel P1.0
What is Project Pixel?
Project Pixel is a small team of developers that work on porting most, if not all of the Google Pixel features to stock firmwares.
We mostly specialize in Stock Samsung Firmwares, although we may do work on ports of OneUi once in a while. Our objective is to deliver the best performance by using stock firmware whilst also improving upon it by debloating and tweaking whilst also giving you all the features of a Pixel device.
IMPORTANT: MUST USE ASF3 PATCHED TWRP MAGISK FOR IT TO WORK!
Pixel Pie 1.0 Feature List:
1. AdAway
2. Deep Debloat and DeKnoxed (Apps, permissions, framework, unnecessary features-stripped and removed)
3. Dolby Atmos with Correct Tuning and Gain (Main Speaker has most power and Earpiece just adds detail and treble)
4. Eleven Music (Lineage OS 15.1)
5. Files GO (File Manager)
6. GCam (Note: GCam might not work on all devices, because of hardware compatibility) Version is 6.0
7. Google Calculator
8. Google Calendar
9. Google Chrome
10. Google Clock
11. Google Contacts
12. Google Keep (With Handwriting Libs)
13. Google Lens (Works within Google Photos and Recents in Pixel Launcher)
14. Google Messages
15. GPay (Working Payment Method along with NFC functionality)
16. Google Phone
17. Google Pie Emojis (Not Samsung Ones)
18. Google Play Games
19. Google Tasks
20. GBoard
21. Mtweaks (Has Hardware Control - Similar to Kernel Adiutor but more tailored to Exynos)
22. Pixel Fonts
23. Pixel 3 Boot Animation
24. Pixel 3 Live Wallpapers with Normal Wallpapers
25. Pixel Google Photos (Free Original Quality Storage)
26. Pixel Module V1 - Pixel Animations, framework and configs.
27. Pixel Launcher with new recent menu
28. Pixel Sounds
29. Samsung Digital Wellbeing
30. Samsung App Lock
31. Samsung Gallery (Stripped Down and lightened to improve performance)
32. Samsung's Stock Camera with HDR parameter changes, debloated and additional video modes (4k30 at HDR- Not Fully Tested)
33. SystemUI Tuner (Provides battery stats along with other useful customiztions - Check QS icons and add it to QS Panel to view)
34. VoLTE Supported
35. YouTube Vanced (Ad-free Youtube)
CHANGELOG 1.0:
initial release
Bugs:
None
Notes:
1. To view Battery Stats and Storage, pull down the Quick Settings Panel and on the top right click the three bubbles button and then Button Order. Then move the new Battery and Storage icon to the Quick Settings.
2. Make sure you set Google Phone as your default phone app. Go-to Settings/Apps. Click the three dots in the top right corner. Then click default apps. Then Calling App and select Phone.
3. After first boot, reboot your device once to ensure dalvik optimization.
INSTALL INSTRUCTIONS:
- As the ROM zip doesn't contain any kernel, is mandatory to have the linked TWRP installed. (Please flash the correct ones)
- For people coming from other ROM than stock, please do a clean flash
- Copy the ROM zip to your phone
- Boot in TWRP and flash the ROM zip
- After flashing the ROM zip, goto Reboot --> Recovery
- Wait for the boot up (5-7 minutes) and setup your ROM to your liking.
- Don't try to update magisk or you'll get a bootloop. If you just tried and got bootloop, reflash the twrp patched with stable 19.3 magisk (link above).
Download Link and Sources:
Feel free to join us telegram via the group: https://t.me/joinchat/G-BflEMjGlgp1NeWxDA2bA
Correct TWRP: ASF3 TWRP with Magisk!!
Download Link 1.0 (MEGA: https://mega.nz/#!HepyDQIB!iytUlAoW9bEQmo4rWiQ1gZDIwTD-fQHmwUaOfNlhj6M
Magisk:https://github.com/topjohnwu/Magisk/releases
Kernel Source:http://source.samsung.com/
Credits:
Google for Android and Framework
Samsung For Their Kernel
Click to expand...
Click to collapse
Can I install it on ASH1 Base?
Can we get some screenshots??? Please.
any video tutorial pls
This is fake, not have informations essentials
hugoct said:
This is fake, not have informations essentials
Click to expand...
Click to collapse
I also think the same
"Updater process ended with error 7"
how you can decide?
rover3000 said:
"Updater process ended with error 7"
how you can decide?
Click to expand...
Click to collapse
Give logs
already found a reason now the phone does not load beyond bootanimation
kindly do not flash this rom otherwise you will get a bootloop
rover3000 said:
already found a reason now the phone does not load beyond bootanimation
Click to expand...
Click to collapse
Just give logs
I do not know how to do it
install according to instructions. But it doesn't start.
fake project?
@d14gvn yes
Any updates?
I like the idea of a non-One UI ROM that comes with samsung's camera and gallery. They just work well. And it's good that basic google apps are included without any play services.
I would like to be able to uninstall these apps though. I don't trust disabling to prevent them from running in the background.
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
(NOTE YOU CANNOT UPDATE FROM PE 11 WITHOUT SEVERE BUGS BACKUP YOUR DATA WITH NANDROID OR ANOTHER APP AND RESTORE IN 12)
Based on Android 12.0
Disclaimer:- This will void warranty.
You will need to unlock bootloader.
*All your data will be lost*
Read all the steps correctly
BUGS:-
mtp (aka transferring files from phone to pc or vice versa with a cable) will not work with adb (it will freeze phone ) to use mtp disable usb debugging in developer options then once you disable usb debugging click usb settings and choose storage
headphone jack does not work (enable use alternative way to detect headsets in phh settings)
audio volume might be low on some devices install the dsp audio module and
DO NOT let the phone die of battery you will not be able to boot and it will be hard to get back into the system (workaround- in magisk install acca https://github.com/Magisk-Modules-Repo/acc and install this apk after installing https://github.com/MatteCarra/AccA then set profile to default (this will shut down the phone at 5% hence removing the risk of your phone not booting after hitting 0%
You tell me
Links
Rom- Download
Stock Samsung kernel source.
Install-
1.Use twrp 3.5.1 (others did not work for me good luck in testing)
2 Unpack the "xz" archive and put the .img file onto the sd card or internal (if you dont have a sd card do step 3 then transfer the img file to your phone)
3. In TWRP head to factory reset format type yes and hit enter
4. Flash the img file (as system obviously)
5. flash eureka oneui kernel (DONT FLASH THE NON ONEUI ONE ONLY FLASH ONEUI EUREKA KERNEL)
6. flash magisk (it is optional but for best performance you should) (use 21.0 for android 12)
Credits-https://github.com/phhusson/
ponces - Overview
Husband of Rita. Father of Luke. Fan of Android and Linux. There is no place like /home 🤓 - ponces
github.com
Pixel Experience Team, phhusson, AndyYan and eremitein -
Zainullah Boot fix (if you cant boot)
install oneui boot into oneui change date to 3 months from now
check for updates
boot into download mode
flash twrp and vbmeta
boot into twrp
do format data
flash multidisabler
flash rom
flash kernel as boot
do factory reset
reboot
if it boots you into fastboot shutdown flash twrp only and try another factory reset and reboot (In twrp)
(Android 12 )
No gapps needed (after installing update all apps in play store including play store itself)
Camera works but use gcam go mod by greatness https://www.celsoazevedo.com/files/android/google-camera/dev-greatness/f/dl9/
if there is any working gcam mod link it so i can test it
gcam go is way way better than the stock camera with hdr night mode portrait and soon filters
(ultra wide and other cameras do not work for now)
Increase performance without any battery impact or (by feravolt and gloeysik)
Step 1
- Install FDE AI Magisk Module to make it a system app, thus it will work better and removes all kernel locks from OEMs (I'm looking at you, Samsung) https://github.com/feravolt/FDE.AI-docs/releases/download/12.4.1m/FDE.AI-as-system-app.MAGISK.zip
- Update FDE AI to the latest version by downloading the latest APK here, since the fde ai magisk module will only install fde ai 12.4.1, not the latest version: https://github.com/feravolt/FDE.AI-docs/releases
- Move to the bottom of the screen and select AI Chat, then type /advancedai (no space, no uppercase letters). This will going to make the AI more effective, without you having to do anything.
- Go to the settings tab and use the AUTO settings for FDE AI.
Optimized and adjusted Google Play services. Contribute to gloeyisk/universal-gms-doze development by creating an account on GitHub.
github.com
install cloudflaredns4magisk
[MODULE] CloudflareDNS4Magisk
install adaway (optional if you want ads or not) , allow superuser for it download this https://energized.pro/bluGo/formats/filter in adaway click he button in the middle click add click file and add the file then go back to the main menu and click the reload button now https://adaway.org/
Blog
Pixel Experience
Donate
jhenrique09
phhusson
AndyYan
eremitein
ponces
supports A307gt?
yes this is a gsi it works on all a30 and a30s but there might be bugs try on your own risk there is no issues on my a307 -fn
There is a problem in the download link my IDM did not work here!
Please Upload a new link
#Beta_tester
it works try the new link
Is the file name (Pixel experience 11 stable)?
Rafyhasan69 said:
Is the file name (Pixel experience 11 stable)?
Click to expand...
Click to collapse
yes
Rafyhasan69 said:
Is the file name (Pixel experience 11 stable)?
Click to expand...
Click to collapse
tell me how the install goes and if there are any bugs
Zainullahk1234 said:
tell me how the install goes and if there are any bugs
Click to expand...
Click to collapse
PixelExperience_a30-11.0-20210913-0041-UNOFFICIAL.zip Did not flash via TWRP IT Gets Error
Rafyhasan69 said:
PixelExperience_a30-11.0-20210913-0041-UNOFFICIAL.zip Did not flash via TWRP IT Gets Error
Click to expand...
Click to collapse
E3004: This Package is for device: a30,a30dd; this device is a30s.
Updater process ended with error: 1.
how to fix the screen
Rafyhasan69 said:
how to fix the screen
Click to expand...
Click to collapse
yes Go to settings → Phh Treble Settings → Misc features →set Rounded corners to 30
Rafyhasan69 said:
how to fix the screen
Click to expand...
Click to collapse
did it work?
yes it works
hi, does nfc work ?
makadang said:
hi, does nfc work ?
Click to expand...
Click to collapse
yes
Zainullahk1234 said:
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 11.0
Disclaimer:- This will void warranty.
You will need to unlock bootloader.
*All your data will be lost*
Read all the steps correctly
BUGS:- Fingerprint does not work (Can be fixed but is very complex and will not be included in tutorial)
fake corners that cut the screen (fix included in thread)
You tell me
Links
Rom- https://github.com/zainullahk/Pixel-expierence-For-a30-and-a30s-
Stock Samsung kernel source.
Install-
1.Need TWRP 3.4.0 or higher!
2. Unpack the "xz" archive and put the .img firmware file into your storage or sd card
3. Go to TWRP and do wipe data-yes
4. Make Wipe data, cache, cache-Dalvik in advanced wipe
5. Flash our .img file which we threw on the Usb/sdcard/storage
6. If you want flash magisk flash it
7. how to fix the rounded corners issue Go to settings → Phh Treble Settings → Misc features →set Rounded corners to 30
Credits-https://github.com/phhusson/treble_experimentations/releases
(Android 11 )
No gapps needed (after installing update all apps in play store including play store itself)
Camera works but use gcam go mod by greatness https://www.celsoazevedo.com/files/android/google-camera/dev-greatness/f/dl9/
if there is any working gcam mod link it so i can test it
gcam go is way way better with hdr night mode portrait and soon filters
(ultra wide and other cameras do not work)
(if face unlock is not working download the pixel feature drop magisk module and install it this fixed face unlock for me and also added more pixel only features
GitHub - ayush5harma/PixelFeatureDrops: Magisk Module for Pixel Feature Drops that adds the system files for the same and spoof using the latest device fingerprint from Google Pixel .
Magisk Module for Pixel Feature Drops that adds the system files for the same and spoof using the latest device fingerprint from Google Pixel . - GitHub - ayush5harma/PixelFeatureDrops: Magisk Modu...
github.com
(images)
View attachment 5447277View attachment 5447279View attachment 5447281View attachment 5447275
Click to expand...
Click to collapse
new bug fix update
nfc did not work on some devices this is fixed
face unlock fixed
minor performance improvements
Rafyhasan69 said:
yes it works
Click to expand...
Click to collapse
flash this in twrp https://forum.xda-developers.com/t/...flagship-stereo-sound-system-for-a30.4245743/ it will fix sound
Zainullahk1234, good job man. The best firmware for today. Thanks for it.
Works great! Thanks
edit: headphones true jack not working?!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Mi Pad 4 (Plus) [clover]
What is this?
PixelExperience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 13
Extra Features
PixelExperience feature
Whats working?
Almost everything
Known issues
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
--
ATTENTION: How to flash
* For full steps please check the PixelExperience wiki
Since pixel experience is packed with pixel gapps, the system partition can't hold that large originally.
So I switched to retrofit dynamic partition(aka super.img) and fastbootd(userspace fastboot).
It's logical and won't affect the real partition table which means you can still go mi flash for fastboot or 9008 to flash the system/vendor partiton for un-brick.
However this method DOES NOT support twrp.
To install/OTA update this ROM, you MUST use the pe recovery which is provided with the ROM.(For official, it is also a MUST for publishing, OTA update won't need flash again after/before rom flash, just need you keep the recovery)
For flashing recovery, use following command on your PC
fastboot flash recovery <img name>
Boot to recovery
Tap "Factory reset -> format data"（This will delete all your data! Only need for first time switch to PixelExperience）
Then tap Apply Update -> Apply from adb
Start sideload by following command on the PC
adb sideload <zip.name>
# Or you can just put ROM on a fat32/exfat/ntfs sdcard/usb otg and insert/plug it, then you can choose it in pe recovery like twrp.
If you see any "metadata" related error, just ignore it, it's common on the first dynamic partition flashing, and won't appear next time
To switch to other ROMs, format data in PE recovery first, and then install another recovery then the ROM.
Eg.
1. reboot to pe recovery -> Factory reset -> format data
2. Back to recovery home -> Advanced -> reboot to bootloader
3. flash another recovery such as twrp
4. press vol+ and power to boot recovery
5. do another factory reset (and a format data if it is twrp)
6. install(/sideload) another ROM's OTA zip like MIUI stock or LineageOS etc.(Warning: the ROM to install must have same kernel version with recovery. Eg. you can't use twrp-4.19 to format then install stock MIUI)
Stay tuned
My clover Telegram group
QQ Group: 372404210
Download
Download
History archive/Screen Overclock Image(Use it at your own risk! May damage device and have FASTER battery drain)
Android OS version: 13
Security patch level: May 2023
Build author/Device Maintainer: Alcatraz323
Special thanks to kyasu, pix106
Device Source code: Device
Kernel Source code: Kernel
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
FAQ:
1. How to enable/disable the task bar below?
Long press the space in taskbar or gesture indicator(the white bar)
2. Why 90/85/75/60Hz still laggy or feel like 30hz? Can you provide a overclocked image on pe website?
Google need warms up, so after you booted like for 5mins, it will be smooth on that refresh rate. Also don't give too much expectation on SDM660, it's just a mid-range cpu.
As for OFFICIAL version, I can't provide any overclock, so the full ROM package will be only provided with 60hz.
3. Why twrp get's error/Must use PE recovery?
Check the "ATTENTION" on #1.
4. What is 13 / 13 (Plus edition)?
The 13 (Plus Edition) NOT means it's for pad 4+, It's PE+, the 13、13 (Plus edition) both available for Mi Pad 4/4+. PixelExperience Plus will have more custom features.
Also, if you are already on normal edition, you can directly dirty flash the same date plus edition or newer plus edition.
5. How to solve heating/power drain too fast on idle?
Usually this won't happen when you clean flash this ROM, and often caused by LTE driver and a system application updated by the Google Play Store called: Android System Intelligence
So, just try enable airplane mode and uninstall the update for that app then reboot will solve (Settings - Application - Find "Android System Intelligence" and click top-right corner button)
6. Why there is always a {"Press any key to shutdown"/fastboot cmd error(like send size error something else} on PC when I try to do something in bootloader like flashing a recovery/unlocking bootloader?
Your USB port on your PC, your cable and your device is not matched. Like Mi Pad 4 is USB 2.0 but you connect to a PC with USB 3.X on that(Usually laptop user). Change your usb setup to match it same: PC USB2.0 cable USB2.0. Or you may google for USB3.0 Reg patch for xiaomi. I don't have it here.
7. How to flash certain partition with pe recovery? (like boot, frp, recovery, persist)
Use
fastboot flash partition_name partition_name.img
OR
In pe recovery:
Advanced - enable adb
Then On PC:
adb push partition_name.img /tmp
adb shell
dd if=/tmp/partition_name.img of=/dev/block/by-name/partition_name
8. Why I lost all my sensor/can't rotate screen after flash?
Clover has a fragile persist partition, sometime it will broken and cause these syndrome after a rom flash. It's not only happen when you flash pe, but flash any rom. Just flash a persist.img backup(yours' is best, but you can also download from others like from other's backup on xda post(like this: https://forum.xda-developers.com/t/...omi-mi-pad-4-unofficial.4514507/post-88228039), thanks ichigo_kurosaki), for the flashing instruction please check the #7 FAQ above.
9. Why my video recorded in 2160p(4k) can't playback(stucking)?
First of all, this device is originally support to 1080p30, the 60fps and 4k recording is force enabled, then SDM660 has a poor video decoder profile, some software may not try to decode 4k even it's announced 4k compatible, you may try playback the 2160p(4k) recordings from your computer, it will work. Or you may try some professional player like VLC.
==============================================
Special notice: Flash the OFFICIAL RECOVERY and CLEAN FLASH if you are from UNOFFICIAL or OTHER SYSTEM please!!!
Current Update(Both PAD 4/4 Plus):
PE Normal Edition(13):
2023.5.19
Device:
kernel: qcom sdm660 kernel update LA.UM.11.2.1.r1-03900-sdm660.0(kernel main/kgsl/wifi-fw-api)
device: qcom sdm660 driver/HAL update LA.UM.11.2.1.r1-03900-sdm660.0(camera/audio)
device: add fastbootd option in advanced reboot(pe plus only, normal pe has no advanced reboot function)
device: add a switch in battery management system to turn off charging ripple animation
Upstream:
Minor platform framework fix
PE Enhanced Edition(13 Plus Edition):
Dirty flash in rec to manually switch to PE Plus, but backup data in case for any accident!!!
Everything above included, and:
- N/A
==============================================
History Updates (non-plus):
2023.2.10 - First release
Introduce PE 13 for Mi Pad 4 (Plus)
2023.2.12
Device:
kernel: switched to 4.19
device: add mi settings
2023.2.18
Device:
kernel: fixed wake brightness burst
kernel: backported fuse passthrough from kernel 5.4 for better android storage performance
device: fixed camera stuck in 3rd app
device: moved xiaomi settings back in Settings -> System
device: added auto removal for wifi only/no fingerprint models
device: switched to erofs, f2fs, fbeV2+emmc_optimization(MUST use new recovcery and FORMAT DATA)
device: fixed weird power off charging ui
device: fixed SD card format in two modes
device: fixed microphone
device: enabled ZRAM writeback
2023.2.20
Device:
device: fixed backlight adjustment on Plus variant
device: fixed usb mode detect on Windows(Mtp or so)
2023.2.24 - First OFFICIAL build
Device:
device: fixed real MAC reading
device: fixed charging led won't work on high battery percent
device: fully translated xiaomi settings for CN
2023.2.27
Device:
device: fixed brightness driver burst for 8inch. (Plus has no burst issue)
device: fixed device setting can't display by side as tablet mode
kernel: update to 4.19.273
kernel: power optimized
2023.3.3
Device:
device: fixed "UNKNOWN SOC TYPE" in some system info type apps (SDA660)
device: fixed cpu freq scheduler always locks max freq by uclamp
device: enabled 60fps recording in camera
device: enabled cgroup freezer
Upstream:
February security patch
Google Apps updated
Fixed battery drain and lag spike caused by Pixel Launcher (Need to uninstall previous updates of Android System Intelligence or do a clean flash if the issue persists)
Fixed SafetyNet not passing
2023.3.24/5
Device:
kernel: update to 4.19.278
kernel: backport 5.10 fuse filesystem
kernel: reduce power consumption for 8 inch screen
device: reduce continuous ui rendering jitter/lag
2023.4.1
Device:
device: add "Usb fast charge on usb3.0 port"(500mA - 900mA) in Xiaomi Settings
device: switch to aosp task/cpu management for some critical tasks(util clampimg)
device: audio quality HUGE fix
device: "Mi Pad 4 Plus" will be differred in System info as well as the default dpi
device: lower memory pressure caused by bad Qualcomm legacy io scripting
device: optimize round corner
device: won't show a fingerprint page on first boot setup for 8inch now
device: complete software codec2 support (aosp_sw)
device: use [email protected] HAL(full USB config panel like reverse charging/role change)
device: set baseband as "Wi-Fi Only" instead of "Unknown" for wifi variant
device: further improve ui/animation lagging
device: optimize RAM consumption
device: optimize background app caching
device: deprecated sdcardfs and use native Android 11 new filesystem base, which supports better scope storage
device: more balanced irq control
device: other minor fix
kernel: minor optimize
Upstream:
Fixed something bad in QPR2(0324/5, below is copied from last)
Android 13 Quarterly Platform Release 2 (QPR2 - lots of new ui/behavior changes)
Enabled multi user switcher on lock screen for large screen device(>600dp)
Source rebased with March security patch
Updated GApps
Updated translations
Minor fixes
2023.4.19
Device:
kernel: update to 4.19.279
kernel: switch default io scheduler to bfq(reduce cpu consumption/power/lag, also +1500 AnTuTu storage score)
kernel: fixed step-chg/sw-jeita(thermal) for pm660_charger/fg
kernel: fixed otg passive mode issue, need one REBOOT after OTA/sideloading
device: fixed system partition not in erofs(increase boot up speed, system app speed)
device: make setup wizard landscape available
device: enable auto rotate by default
device: separate notification and ringtone volumes
device: fixed charge speed issue for LTE/Plus after hang off a call
device: force recovery update with system
device: irq balance now using 4 big cores (previously only 2 big cores)
device: CloverParts: add volume panel trigger in QS
device: CloverParts: add my battery manage system (Settings -> Battery -> Battery Management System) - Step charger / thermal charger switch
- Mode: limit battery around 40-60%
- Mode: limit battery around 80%
Upstream:
April security patch
Updated translations
Optimizations on battery usage of Pixel Launcher
Minor issues fixed
2023.5.3
Device:
kernel: update to 4.19.282
kernel: sdm660 kernel driver update from qcom(wifi/kernel/audio)
kernel: minor fix & optimize
device: expand wifi signal tolerance(reduce disconnect on bad wifi)
device: update display driver for sdm660(gralloc - HAL/display)
2023.5.7
Device:
emergency fix: 0503(PE Plus): headphone jack
emergency fix: 0503(PE Plus): camera video recording
device: allow 5G hotspot(called "Extend compatibility" in settings, reuquires a factory reset if you need it)
Upstream:
May security patch
Updated translations
Updated Google Apps
Minor issues fixed
2023.5.19
Device:
kernel: qcom sdm660 kernel update LA.UM.11.2.1.r1-03900-sdm660.0(kernel main/kgsl/wifi-fw-api)
device: qcom sdm660 driver/HAL update LA.UM.11.2.1.r1-03900-sdm660.0(camera/audio)
device: add fastbootd option in advanced reboot(pe plus only, normal pe has no advanced reboot function)
device: add a switch in battery management system to turn off charging ripple animation
Upstream:
Minor platform framework fix
==============================================
History Plus Updates:
2023.2.10 - First release
- N/A
2023.2.12
- N/A
2023.2.18
- N/A
2023.2.20
- N/A
2023.2.24 - First OFFICIAL build
- N/A
2023.2.27
- N/A
2023.3.3
- N/A
2023.3.24/5
- N/A
2023.4.1
- N/A
2023.4.19
- N/A
2023.5.3
- N/A
2023.5.7
- N/A
2023.5.19
- N/A
Reserved
Saw your patch on Gerrit for fixing launcher on tablets, I didn't realize that you have a clover!
perfect rom installed. I wanted to ask if you could build on kernel 4.19 and include the xiaomi parts to have screen color management and volume enhancement
( kernel 4.4 is no longer supported eol )
Piccolo1 said:
perfect rom installed. I wanted to ask if you could build on kernel 4.19 and include the xiaomi parts to have screen color management and volume enhancement
( kernel 4.4 is no longer supported eol )
Click to expand...
Click to collapse
Trying 4.19, and screen color manage is in Display->Live display for now
Alcatraz323 said:
Trying 4.19, and screen color manage is in Display->Live display for now
Click to expand...
Click to collapse
if it can be useful to you there is a very good developer pix106 you can use his 4.19 trees and believe that he also integrates the xiaomi parts. of the xiaomi parts it was useful to boost the volume of the speaker
pix106 - Overview
pix106 has 49 repositories available. Follow their code on GitHub.
github.com
Piccolo1 said:
if it can be useful to you there is a very good developer pix106 you can use his 4.19 trees and believe that he also integrates the xiaomi parts. of the xiaomi parts it was useful to boost the volume of the speaker
pix106 - Overview
pix106 has 49 repositories available. Follow their code on GitHub.
github.com
Click to expand...
Click to collapse
Successed with his kernel, uploaded 4.19 version, you may try it
thanks for the information, and the future version will be developed base on 4.19
Alcatraz323 said:
Successed with his kernel, uploaded 4.19 version, you may try it
thanks for the information, and the future version will be developed base on 4.19
Click to expand...
Click to collapse
I'm happy to have been helpful to you. I installed your new rom and it's perfect! Thank you ❤
Piccolo1 said:
I'm happy to have been helpful to you. I installed your new rom and it's perfect! Thank you ❤
Click to expand...
Click to collapse
Hi! You have mi pad 4 8'?
Zirafa said:
Hi! You have mi pad 4 8'?
Click to expand...
Click to collapse
Yes 8 LTE
Hi , fantastic rom , however I constantly get Bluetooth keeps stopping error? any help appreciated
aGoodEightInches said:
Hi , fantastic rom , however I constantly get Bluetooth keeps stopping error? any help appreciated
Click to expand...
Click to collapse
reset the tablet from the settings
0218 Updated
WARNING: Huge change to filesystem, MUST use new recovery and do format data before moving on
Check #2 for changelog
Hi
What are these files for?
boot_XXhz.img
And what's the difference?
LeshaRB said:
Hi
What are these files for?
boot_XXhz.img
And what's the difference?
Click to expand...
Click to collapse
Screen refresh rate overclock, may damage device
Thank you for a great rom.
I installed version 2023-02-18 and during various tests, I noticed an issue with microphone sound not being input.
The test app used Google recorder, and it was able to record the bluetooth microphone, but not the mipad4 device microphone.
NetHana said:
Thank you for a great rom.
I installed version 2023-02-18 and during various tests, I noticed an issue with microphone sound not being input.
The test app used Google recorder, and it was able to record the bluetooth microphone, but not the mipad4 device microphone.
Click to expand...
Click to collapse
Will look into it
Thank you very much for the great work.
Very fluid and so far working perfectly.
It only lacks the play protect certification. Uncertified device.
I hope to give my Mi pad 4 tablet a long life with this ROM.
Batoyer1 said:
Thank you very much for the great work.
Very fluid and so far working perfectly.
It only lacks the play protect certification. Uncertified device.
I hope to give my Mi pad 4 tablet a long life with this ROM.View attachment 5840005
Click to expand...
Click to collapse
That's common for Jan pe, fixed in coming Feb