[ROM][UNOFFICIAL][8.1.0][treble][mido] LineageOS eXtended 15.1 [Closed for posts]
Thread closed as requested by Developer. Hopefully he opens one soon for everyone to use
Rom download https://androidfilehost.com/?w=files&flid=256804
Change Log - https://pastebin.com/raw/zEH3kdjK
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS eXtended is a free, community built, aftermarket firmware distribution of Android 8 (oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS eXtended is based on LineageOS and the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS eXtended does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS eXtended is available in the LineageOS eXtended Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Source Code:
https://github.com/LineageOS-eXtended
What's working :
Boots
RIL (Calls, SMS, Data)
Fingerprint
IR Blaster
Wi-Fi
Bluetooth
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
GPS
Volte
Known issues:
You Tell me
Instructions :
Download the latest build and GApps
Reboot to recovery
Flash the latest build and GApps
Reboot
Downloads :
Twrp for Treble builds (will work with normal builds too)
Custom magisk for treble enabled builds v16.4
Un-Official build [Nightlies]: https://androidfilehost.com/?w=files&flid=256804
MIUI Camera (For Slow Motion Video Capture)
GCam (UriKill Version) - For better HDR+ photo capture
Credits :
Alexey711 - Rom Compiler / Developer
XDA:DevDB Information
LineageOS 15.1 eXtended Redmi Note 4, ROM for the Xiaomi Redmi Note 4
Contributors
p3dboard, p3dboard, alexey71
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Miui 9 8.5.x or later
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: https://androidfileh
Stable Release Date: 2018-05-05
Created 2018-05-07
Last Updated 2018-05-07
First.
Screenshot please
Akibtech said:
First.
Screenshot please
Click to expand...
Click to collapse
Done, I just added a screen shot of the Settings, showing the Build number, and also of the Advanced Settings for adjusting the flash light.
There's a Youtube video https://www.youtube.com/watch?v=ZFx21b-oT1c that explains the extra features of this over LineageOS
(Moved from LineageOS thread)
Magisk Module - to change some defaults - values listed below. Just allows me to turn off Noise Cancellation for Video recording, use fluencepro instead of regular fluence Noise Cancellation and enable EIS by default.
Verified that the getprop command from a ADB shell returns the new values. Looks like the Module is working
Build.prop additions
Code:
# Add EIS and disable noise cancelation
persist.camera.eis.enable=1
#use fluencepro instead of fluence
ro.vendor.audio.sdk.fluencetype=fluencepro
#turn off noise cancellation for audio recordings
persist.vendor.audio.fluence.voicerec=false
Charging speed slow or Normal,
Because Many oreo rom charging very slow like 500mh - - 1200mh
bujing2 said:
Charging speed slow or Normal,
Because Many oreo rom charging very slow like 500mh - - 1200mh
Click to expand...
Click to collapse
Normal, I've never seet it jumps to 2k but it was playing at 1.8-1.9
Backups - Btw, if anyone wants to get SMS Backup, Call History Backup etc, going on Oreo, and you have Root Access (Magisk Root as an example), then you can get it going by opening up a Terminal Window (get Terminal App from Google play).
Then from the terminal run
Code:
su
bmgr run
bmgr backupnow --all
Once its completed, do a reboot, and you'll notice that in your Backup Status, your SMS's, Call Logs, Device Settings etc are now backed up. They should now backup once every 24 hours to your Google Drive, for use if you need to restore your device.
Last time I tried an Oreo Rom, it wasn't backing up, and at that time, I didn't know how to fix it. So I went back to MIUI for a while, so I had the auto backup (yeah I could have used an application for SMS backup, but I wanted the OS to do it )
Dolby Atmos & ViPER4Android work properly or not?
Downloading rom.
Is it based on abhishek? If not, is it enforcing selinux?
amnher said:
Is it based on abhishek? If not, is it enforcing selinux?
Click to expand...
Click to collapse
Not sure, but I guess that because its got LineageOS as its source with extra's on top, if abhishek has contributed to the LineageOS Gerrit than that might be true. Since its a Russian Developer, you would probably have to ask on the 4pda.ru forum to get an exact answer.
At the moment, seLinux is in permissive mode, so its not enforcing.
p3dboard said:
Not sure, but I guess that because its got LineageOS as its source with extra's on top, if abhishek has contributed to the LineageOS Gerrit than that might be true. Since its a Russian Developer, you would probably have to ask on the 4pda.ru forum to get an exact answer.
At the moment, seLinux is in permissive mode, so its not enforcing.
Click to expand...
Click to collapse
Hows the thermal problem on network?
amnher said:
Hows the thermal problem on network?
Click to expand...
Click to collapse
I have only just started using the rom, but haven't experienced any issues yet.
According to Alexey's change log of recent activities, on the 2/5/2018 he "Updated thermalconfig" - so maybe that's the fix for the issue?
05/05/2018
Corrected copying to MicroSD (for example, QuickPic application or stock gallery)
Added setting "Notification display time" (Settings - Applications and notifications - Notifications - Pop-up notifications)
Added "Notification transfer time" setting (Settings - Applications and notifications - Notifications - Pop-up notifications)
================================================== =====================================
05/04/2018
Fixed crash bluetooth after reboots
================================================== =====================================
05/03/2018
Corrected the disappearance of the fingerprint, if you place another Treble core
Added patch cameras, for 60fps and from the dark video. Thanks FaXiR http://4pda.ru/forum/index.php?s=&showtopic=833225&view=findpost&p=72042322
Removed the animation of Android R. Use Ethans, as for me, even more beautiful and there is no bug
WiFi 2.4GHz - now can connect at a speed of 150Mbps
Removed warning "Not compatible image of vendor ...."
Updated the kernel to 3.18.108
================================================== =====================================
05/02/2018
New Diode Driver
Updated thermalconfig
================================================== =====================================
05/01/2018
The firmware was transferred to TREBLE.
It is necessary to make a clean installation with System-Data wikis (Data format is desirable at once) - Vendor - Cache
p3dboard said:
I have only just started using the rom, but haven't experienced any issues yet.
According to Alexey's change log of recent activities, on the 2/5/2018 he "Updated thermalconfig" - so maybe that's the fix for the issue?
05/05/2018
Corrected copying to MicroSD (for example, QuickPic application or stock gallery)
Added setting "Notification display time" (Settings - Applications and notifications - Notifications - Pop-up notifications)
Added "Notification transfer time" setting (Settings - Applications and notifications - Notifications - Pop-up notifications)
================================================== =====================================
05/04/2018
Fixed crash bluetooth after reboots
================================================== =====================================
05/03/2018
Corrected the disappearance of the fingerprint, if you place another Treble core
Added patch cameras, for 60fps and from the dark video. Thanks FaXiR http://4pda.ru/forum/index.php?s=&showtopic=833225&view=findpost&p=72042322
Removed the animation of Android R. Use Ethans, as for me, even more beautiful and there is no bug
WiFi 2.4GHz - now can connect at a speed of 150Mbps
Removed warning "Not compatible image of vendor ...."
Updated the kernel to 3.18.108
================================================== =====================================
05/02/2018
New Diode Driver
Updated thermalconfig
================================================== =====================================
05/01/2018
The firmware was transferred to TREBLE.
It is necessary to make a clean installation with System-Data wikis (Data format is desirable at once) - Vendor - Cache
Click to expand...
Click to collapse
Ethans Animation really beautiful and fast
Where is the latest update link OP is little confusing.
G camera- recording 60fps without dark video, or not
bujing2 said:
G camera- recording 60fps without dark video, or not
Click to expand...
Click to collapse
You have to have sufficient light to get 60fps. Under dark / low light, the video gradually gets darker, as the Camera doesn't let in enough light to do that high a FPS except in bright conditions.
The only way to overcome that is to use Open Camera, and set it to Manual Exposure mode, then you can drop the FPS recording to say 15fps, and up the ISO to 1600, decreasing the shutter speed. Xiaomi Miui has something automatic that drops the FPS to increase the brightness with its Camera module.
But under bright / outdoor light, you can get close to 60fps. Today I got 58.5 fps in my test.
haravtar said:
Where is the latest update link OP is little confusing.
Click to expand...
Click to collapse
"instructions : download the latest build"
what is confusing...
haravtar said:
Where is the latest update link OP is little confusing.
Click to expand...
Click to collapse
I've updated the 1st post, hopefully its a bit clearer to you now - There's an AndroidFileHosts.com site that contains the rom builds.
Dolby Atmos & ViPER4Android working in this rom?
bujing2 said:
Dolby Atmos & ViPER4Android work properly or not?
Downloading rom
If you're flashing the combined zip of foly and viper I don't think viper will work but the dolby will.
---------- Post added at 08:47 AM ---------- Previous post was at 08:43 AM ----------
Does this rom has snap camera because we can record 120fps slow motion on it.
Click to expand...
Click to collapse
Related
Use > this other thread < to ask questions or to discuss about something
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
ROM Downloads
<< Stable >>
20150731 Final Build: https://www.androidfilehost.com/?fid=24052804347784711
<< Misc. (Modem & Recovery) >>
GearRecovery (based on TWRP Recovery) 20150324: https://www.androidfilehost.com/?fid=95916177934545673 <= Recommended
I9500XXUHOD7 LL Modem: https://basketbuild.com/filedl/devs...s And Bootloaders/I9500-XXUHOD4-MODEM_CWM.zip <= Russian Modem, Recommended
I9500DDUHOA1 LL Modem: http://forum.xda-developers.com/attachment.php?attachmentid=3165311&d=1423927137 <= Indian Modem, use it if you're experiencing problems with Russian variant
Previous Releases:
<< Stable >>
20150506 Build: https://www.androidfilehost.com/?fid=23991606952598514
20150424 Build: https://www.androidfilehost.com/?fid=96042739161893123
20150403 Build: https://www.androidfilehost.com/?fid=95916177934550380
20150324 Build: https://www.androidfilehost.com/?fid=95916177934545672
20150228 Build: https://www.androidfilehost.com/?fid=95916177934535412
GearRecovery (based on TWRP Recovery) 20150228: https://www.androidfilehost.com/?fid=95916177934535416
20150214 Build: https://www.androidfilehost.com/?fid=95916177934529038
GearRecovery (based on CM Recovery) 20150207: https://www.androidfilehost.com/?fid=95916177934524927
20150207 Build: https://www.androidfilehost.com/?fid=95916177934524891
GearRecovery (based on CM Recovery) 20150119: https://www.androidfilehost.com/?fid=95897840722646145
20150120 Build: https://www.androidfilehost.com/?fid=95897840722646839
20150117 Build: https://www.androidfilehost.com/?fid=95897840722644860
20150105 Build: https://www.androidfilehost.com/?fid=95887005526786982
<< Beta >>
20141227 Build: https://www.androidfilehost.com/?fid=95864024717070984
20141224 Build: https://www.androidfilehost.com/?fid=95864024717069340
20141223 Build: https://www.androidfilehost.com/?fid=95864024717068584
20141216 Build: https://www.androidfilehost.com/?fid=95857557620393081
Google Apps (add-on)
http://opengapps.org/ <== Recommended <> Platform: arm | Android: 5.0 | Variant: nano
Installation
3-button-combo = "Volume Up/+" + "Home/Center" + "Power/Lock"
- First time flashing GearCM 12 to your Galaxy S4 (or coming from TouchWiz/Stock Based ROMs)?
Root your device and install latest GearCM Recovery.
Reboot into Recovery using 3-button-combo
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)
Install the ROM from internal/external sdcard using ClockworkMod Recovery
Optionally install Google Addon
Done! You can now reboot the phone to enjoy the rom
- Upgrading from Official CM10.2/CM11/CM12 or GearCM 11?
Reboot into Recovery using 3-button-combo
Do a Nandroid Backup!
Install latest latest GearCM Recovery.
Reboot into new Recovery using 3-button-combo (if needed)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)
Install the ROM from internal/external sdcard using ClockworkMod Recovery
Optionally install the Google Addon
Done! You can now reboot the phone to enjoy the rom
- Upgrading from another build of GearCM 12?
Reboot into Recovery using 3-button-combo
Do a Nandroid Backup!
Install latest latest GearCM Recovery.
Reboot into new Recovery using 3-button-combo (if needed)
Install the ROM from internal/external sdcard using ClockworkMod Recovery
WIPE Dalvik/ART Cache (wipe cache partition + wipe dalvik cache)
Done! You can now reboot the phone to enjoy the rom
Known Issues (regarding latest available Stable build)
Please do not report bugs if it is already listen in the list of known issues
Rarely, when you wake-up the device, touchscreen will have a noticeable input lag, easily fixable by turning off and on the display. (H/W or S/W bug?)
Wireless Display with some TVs could cause issues (AOSP bug related to HDCP, and Google doesn't provide a solution)
Video Stream through Screencast & Wireless Display will have inverted Red and Blue color channels due to BGR Pixel Format (actual Exynos sources don't allow to fix it)
Any Chinese (CHN, I9500XCUxxx codename) Baseband/Modem reduces Call Quality (due to forced AMR_WB, unsupported by CHN modems)
5GHz Wi-Fi Networks using Band B (52-140) and Band C (149-161) channels won't be listed (H/W or S/W bug?)
Reporting Bugs
You are allowed to report bugs only in this thread. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
REPORT BUGS IN THIS THREAD ONLY
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow. Note: If you can provide the latest night/build that the bug didn't exist, it would greatly help in tracking down what caused it.
Code:
What is your--
Phone model:
Radio (baseband) version:
GearCM version:
GearCM download url:
Google Apps version:
Did you--
wipe data/factory reset:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance Settings (other than stock):
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Changelog
20150731:
Updated CM Sources
Follow CM12.1 Changelog, until 20150731 Build.
Previous Releases:
20150506:
Updated CM Sources
KERNEL: Optimized Memory Operations
KERNEL: Optimized big.LITTLE CPU utilization
KERNEL: Optimized TCP Congestion Method
KERNEL: Some net. & ARM fixes
20150424:
Updated CM Sources
Updated Audio Driver and Configuration
Removed Hardware MPEG2 Codec
Properly Fixed and Updated XMM Modem RIL
Fixed Manual Network Operator Search
Reduced EGL Cache Size to reduce RAM usage
Fixed in-call echo problem (definitely)
Reduced Speaker Volume (to reduce distortion)
Using latest LL Hardware OMX Codecs
Optimized Wi-Fi by using Stock Configurations
Fixed Video Recording (no more pixelated videos)
KERNEL: Optimized Vibrator Driver
20150403:
Updated CM Sources
Highly Optimized
Updated Audio Driver
Updated RIL Stuff
Stabler and better audio mixer values
Optimized RAM Management
RECOVERY: Updated TWRP sources
20150324:
Updated CM Sources
Restored USB Mass Storage support
Fixed LEDs while in offline charging mode
KSM Configured and Enabled by default
Restored battery percentage while in offline charging mode
Using latest LL proprietaries
RECOVERY: Updated TWRP sources
KERNEL: Switched to LL kernel sources
KERNEL: Reduced debug
KERNEL: Merged some updates from Android 5.1
20150228:
Updated CM Sources
Improved Battery Life
Optimized Bluetooth Audio (A2DP & SCO)
Increased Speaker Volume
Decreased Headset Mic. Volume
Fixed VOIP Apps (Skype and such...)
Fixed MTP without ADB Debugging
Added F2FS Support for Cache & Data partitions (use latest GearCM Recovery to change filesystem type)
Fixed slow Flashlight toggle
Enabled Noise Suppression
Enabled Call Recording
Re-Introduced non-PIE support
Fixed touch-on-notifications (Ambient Display)
Fixed lags on some games
Disabled Equalizer Visualizer on Music app by default (laggy)
Optimized Auto-Brightness values
Reduced battery safe temperature (before 60 degrees, now 55)
Using Nexus 5 MMS User Profile
Fixed USB OTG on Lollipop
Increased External Storage speed access
Disabled Wi-Fi background scan (no one uses it and if enabled it causes battery to drain on idle)
Added Advanced Display settings
KERNEL: Optimized performance
KERNEL: Increased compression to fit new TWRP recovery
KERNEL: Enable some required flags by LL
KERNEL: Added F2FS Driver
20150214:
Updated CM Sources
DRM tested and properly working
Stabler Bluetooth Audio Quality
Added TouchScreen hovering support (untested)
Updated fingerprint to latest LL Stock Release
Increased main mic volume everywhere
Updated proprietary blobs to latest LL ones (except sensors stuff)
20150207:
Updated CM Sources
Updated Audio Driver (with new mixer_paths, now working much better than before)
Optimized Input/Output Audio Levels (no more echo effect and much more...)
Fixed Bluetooth Audio bad quality
Optimized ART Runtime for Cortex-A15
Optimized Network Speed (Mobile & WiFi)
Added Blinking Led Support (charging light uses low-power now, low light level is normal)
Re-Enabled 3D TV Support through MHL HDMI
Re-Worked CM Performance Profiles (now Balanced as default)
Some Updates from I9500XXUHOA7 (usable ones without LL kernel sources)
KERNEL: Updated Audio Driver to latest available from Wolfson
KERNEL: VPN should work properly now for ALL users
20150120:
Updated CM Sources
Fixed all DRM-Dependent apps (tested and ultra-tested)
Added some updates from I9500ZCUJOA3 leak (GPS, Radio and other minor changes)
20150117:
Updated CM Sources
Disabled S3D (3D TV through HDMI) support, useless on a mobile device
Fixed all SystemUI (Recents Apps/Apps Switcher) lags
Fixed all RIL Wakelocks (again) related to unsupported Samsung's requests
Fixed SOS Calls (i know that someone will be happy for this )
Fixed USB Charging Only mode
DRM-Dependent apps should work correctly now
Reorganized phone initialization process (now cleaner than ever, even faster)
Optimized Auto-Brightness values
Optimized Mobile Data/Wi-Fi Internet speed
Speaker and Earpiece volume is now higher (as users request)
Disabled Block-Based OTA (this should fix all problems with ROM Flashing process, e.g. Status 1 Errors; Chinese PIT is now compatible)
Switched to new CM LL Boot Animation
AC & USB Charging Values are now the same (this means that you can charge your phone with USB or with AC at the same speed)
Some other optimizations and clean-up here and there
20150105:
Updated CM Sources
Enhanced Stability and Performance
Now switched from Beta to Stable
Disabled Audio Offload (unsupported)
Fixed Google Now Voice Input on Home Screen
Switched from old AwesomePlayer (KK) to NuPlayer (LL)
Enabled Ambient Display as user request
Clean-up Wi-Fi stuff
Enabled GPS LTO Support (http://www.broadcom.com/products/GPS/Location-Based-Services/LTO-AGPS)
Clean-up Framework overlays
Enabled CM Performance Profiles like on CM11
Correctly Configured Audio/Video Decoders
Fixed Flashlight/Torch (using a temp. workaround)
Properly fixed Root and USB at first boot
A2DP Calls should work fine for everyone now
You'll probably find many other fixes that i don't remember
EXTRA: Happy new Year
20141227:
Updated CM Sources
Properly fixed & enabled Bluetooth features
A2DP Calls should work fine now
Reduced Surface Buffers for smoother UI experience
Increased EGL Cache size to reduce lags
Fixed Audience ES325 audio effect name (now it should work fine everywhere)
Fixed Wi-Fi instabilities & Tethering
Added Screencast app
Properly enabled USB Ethernet support
Added CM Performance Profiles (for future usage)
Fixed & Optimized Offline Charging mode (now using less power than before) <= On Android L 4.2 bootloaders aren't supported anymore so offline charging may work only on 4.3 and newer ones. Let me know if works or not for you.
We are probably ready for a Stable release... ( or not? )
KERNEL: reduce surface buffers
KERNEL: clean-up PVR GPU driver
KERNEL: some optimizations here and there
20141224:
Updated CM Sources
Fixed GPS
Updated NFC config
Using PIE binaries for RIL
Probably fixed all ART instabilities (app not installed and blah blah blah)
KERNEL: reverted change that was causing chrome and other app to crash
KERNEL: re-enable Android LMK
KERNEL: removed all Samsung USB rubbish
KERNEL: added some FS optimizations
EXTRA: Happy Christmas
20141223:
Updated CM Sources
Fixed all buttons features
Do not start GPS Binary (will be fixed when Samsung releases official Lollipop for our device)
Clean-up here and there
Smoother then ever, probably smoother than GearCM 11
Fixed WiFi instabilities
Fixed all Widevine (DRM) stuff
Application not installed bug should be fixed
You'll probably find many other fixes that i don't remember
20141216:
First Release
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
[GearCM][i9500][5.0.x] Optimized CyanogenMod 12 for Samsung Galaxy S4 [Final], ROM for the Samsung Galaxy S 4
Contributors
Alberto96, intervigil, codeworkx
Source Code: https://github.com/GearCM
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: No Longer Updated
Current Stable Version: 20150731
Stable Release Date: 2015-07-31
Current Beta Version: 20141227
Beta Release Date: 2014-12-27
Created 2014-12-16
Last Updated 2015-09-26
Read carefully.
Differences between GearCM (Optimized CyanogenMod) and Official CyanogenMod (NIGHTLY):
Degrated Shadow said:
Enough of those dumb questions..
The official CM rom is maintained by @Alberto96 and @intervigil
He makes the very recent changes here relating to performance.. which are then in time pushed to CM official rom. The kernel is different because it has selinux disabled and few minor tweaks you might not even notice.. this gearcm rom will have more performance. But CM rom will have their updated base changes which are included here with each update.
What I mean is you probably wont even notice what's different in terms of user interface.. gearcm will have more performance. Official cm will have updated sources. But it will include gearcm's changes in time as @Alberto96 pushes them to CM
You can decide by a simple choice. more performance and not-nightly updated sources or similar performance (improving with nightly updates) with updated sources. I would choose gearcm because of the reasons I mentioned above. Do what you will.. and let this be a note to everybody who ask this again and again and again. Don't spam the thread with same question in every alternate page.. Because there are other people who might have different problems they need to ask. Read atleast 15 previous pages and the first post changelog before asking the question. Reading most of the times will give you a solution and if not most of the info you will read will help you anyway.
Click to expand...
Click to collapse
Reserved
FAQ (Frequently asked questions)
Where are "Performance" and "Developer Options" categories?
To activate 'Performance' and 'Developer Options' categories in Settings you need to tap 7 times on 'Build number' located into Settings -> About Phone.
How can i solve problems with Hebrew language?
Go to "Developer Options" in Settings and check "Force RTL layout direction".
What can i do to reduce the "echo effect" while in-call?
Try to reduce in-call earpiece volume (if possible).
I'm having problems with battery life, what can i do?
1) Use "Greenify" to hibernate all apps with a "little cloud + 'Gcm' word inside" on the right of each app's name. Donation version is recommended because it allows deeper hibernation of apps
2) Disable "Location" or set it to mode "Battery Saving" (Settings -> Location)
3) Make sure that your 2G/3G mobile network signal level isn't always low or unstable
4) Deny "Wake Up" and "Keep Awake" permissions to Google and third-party apps. (Settings -> Privacy -> Privacy Guard -> Press menu button and check "Show built-in apps" -> Press menu button again and go to Advanced -> Horizontal Scroll to Device)
5) Disable "Sync" or sync only useful stuff like Contacts
6) Disable "Auto-rotate screen" (Settings -> Display & lights -> Rotation)
7) Use one of the latest Modem/Baseband listed on first post.
8) Disable Ambient Display
9) Install Xposed Framework and configure Amplify
If this isn't enough then replace your battery and/or reduce your phone usage. :silly:
Is GearCM OTA supported?
Yes (Since 20150707 Build)
Why is my phone over-heating while playing heavy-games or running heavy-apps?
Use a bit your brain to explain why. High CPU and GPU usage = high heat production. Your phone will automatically throttle CPU when needed so don't worry, it is safe and normal.
Can I use another kernel instead of the one included in the zip?
No. Only use the included kernel for 100% compatibility, bug reports with non-standard kernel will be ignored.
Can i disable S-View cover features (lock/unlock)?
Not yet.
*** IR Remote app isn't working anymore/was working on previous builds/causes my phone to crash, what can i do?
Contact *** IR Remote app developer.
Any question about "Can't connect to camera" issue
Do not "stress" camera on CM because we don't use yet a proper implementation. Open/Close Camera apps carefully without force-closing them.
fix stock camera try flash this zip https://www.dropbox.com/s/z2a7hegwzu9ft2c/Fix_Camera_Cmmct_5.0.zip?dl=0
Been using lollipop as a daily driver with awesome results. But still there's something that bugs me. Although GPS works fine I find that its accuracy is pretty low.
For instance I run in order to keep fit. I use adidas miCoach which calculates your speed and distance covered giving as result km speed (from Argentina). GPS has a hard time keeping up with this and every time I train I revert to TW and then back to Lollipop.
Will test this GPS and see if its better than team Cajinica
does this rom have working bluetooth calls over car stereo?
mhboooool said:
fix stock camera try flash this zip https://www.dropbox.com/s/z2a7hegwzu9ft2c/Fix_Camera_Cmmct_5.0.zip?dl=0
Click to expand...
Click to collapse
Not required here.
RoCorral said:
Been using lollipop as a daily driver with awesome results. But still there's something that bugs me. Although GPS works fine I find that its accuracy is pretty low.
For instance I run in order to keep fit. I use adidas miCoach which calculates your speed and distance covered giving as result km speed (from Argentina). GPS has a hard time keeping up with this and every time I train I revert to TW and then back to Lollipop.
Will test this GPS and see if its better than team Cajinica
Click to expand...
Click to collapse
Does it happens also on CM11?
AndresSanzH said:
does this rom have working bluetooth calls over car stereo?
Click to expand...
Click to collapse
It should.
.hackman. said:
Patiently waiting for the upload..
Click to expand...
Click to collapse
Gboss01 said:
Great work Alberto
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
Nalmaus said:
Great to see u working on this, i followed u when kitkat comes up and u made an amazing work, good luck with this!
Click to expand...
Click to collapse
Build finally uploaded.
Enjoy
Alberto96 said:
Not required here.
Does it happens also on CM11?
It should.
Build finally uploaded.
Enjoy
Click to expand...
Click to collapse
Great. Downloading now[emoji1]
"App not installed" if manually install an apk.
Is there any workaround?
@Alberto96 haven't test it on GearCM 11. I'll try and report back asap
Can't install apks.
Although pushing apks to system works. Titanium backup in not able to restore as well.
Edit: I guess Titanium Backup does work. Not with the default superuser though. I flashed supersu to get it working in frapeti's rom, strange.
RoCorral said:
@Alberto96 haven't test it on GearCM 11. I'll try and report back asap
Click to expand...
Click to collapse
With GearCM 11 latest build GPS is pretty accurate. Used Waze while driving and miCoach while walking and had good results.
Further testing done with the build posted (20141216) I can't access SD card to install apks that are not from playstore for example BBS, and getting the low memory message even if full wiped and fresh installed.
Can't install APK in this Build ...
Storage Issues
@Alberto96 Hey man there seems to be an issue with your Kernel please take a look at the changes u made as they seem to be the cause of peope not being able to install any APKS and Install from playstore as its complaining about the storage being low so what i did is compile with CM kernel and tested it and the GearCm works fine without any storage issues but if I compile it using ur GearCm Kernel thats where theres storage issues. Please take a look at it
Thanks for your time and dedication of this Alberto. Unfortunately I'm having a hard time with your CM12 Releases
With CM12-20141212v2 (I did a clear wipe) and no RIL Service. So I was not able to use it basically...
Today I gave it a second try CM12-20141216 . I was happy to see my 3G Connection. But when I started to download the app from Play Store. It was impossible. All APKS giving an error.
I will test Canjica Version. It's a pity but I will have to wait till we get to a stable version of Android 5.0.1 with GearCM12.
Despite of that, Thanks for your work on this! We wouldn't have this if it wasn't because of you
Heads Up
Brilliant to have 5.0 on our phones, look and feel is really cool.
Confirmed Working:
Calls, SMS, Internet (WIFI & 3G), Camera, Gallery
FC's:
Music, File manager, Play store (all google apps) & anything else which is on the SD card
Keep it up guys:good:
Application not installed?
thanks for update 12\21 @Alberto96 ...but issue with installing apk is here.
New build is coming with some fixed, especially performance related.
New build is up!
Enjoy
This is the Official Jaguar rom for Amami, which is based on AOSP with some flavors from Slim and Dirtyunicorn. The main difference from other roms is the emphasis on security and multiple features. With that in mind , let's see what Jaguar has to offer:
1. Hardened Kernel, modified M5 built with UBERTC 6.0; hardened rom built with HYPERTOOL 5.4
2. All ciphers enabled in kernel instead of just a few
3. Hardened/Fortified Bionic and Libs
4. Fstack protection strong to resist buffer overflows
5. Many System apps and processes are made read-only, to reduce elevation of privilege
6. Selinux replaced with Tomoyo Security, Yam security
7. Disc encryption, keymaster to 256 bit AES instead of 128
8. Latest TWRP with working brightness and ability to decrypt Data
9. Random number generation mixed hardware/software, as recommended by Linus Torwalds
10. Options to randomize host on every boot
11. Option to have a separate password for lock screen and boot
12. Qualcomm's Time Services disabled due to leaking on early boot (set time to automatic to get it from your carrier). Forget it. The rom now includes Sony TimeKeep that sets the time locally
13. WIFI Background Scanning disabled to prevent leaking
14. Internet disabled for both WIFI and Data until Afwall is set and activiated (Afwall included in download, install as regular app)
15. The phone is VOLTE ready and you have all network options available in Cell menu (not just LTE/WCDMA/GSM)
16. GRsecurity features, such as Sidechannel implemented
17. Some Pax Security Features
18. Option to deny USB connection: denied always; denied when locked; and allowed always
19. Hardened webview with Google and other "interesting" IPs removed
20. Prevention of bruteforcing screen pin: the phone will reboot upon 3 unsuccessful attempts
21. Perfect_Event_Paranoid ported from Grsecurity: now third party apps can't use other apps including system to elevate privileges
22. Camera hardware button works to focus, take pictures and start video recording
23. Option to disable writing to Tombstones (a lot of private info is dumped there if there is a crash)
24. Option to disable continuing writing of logcat
25. Option to disable device cameras: back; front, both or none
26. Always latest Google Security Patches
27. Always latest Code Aurora Security Patches
28. Changes ported directly from Google Android Gerrit, so most of those in MM and even N are in this rom
29. About 80% of kernel changes are ported into Jaguar kernel from 3.10 and 3.18 (not Sony AOSP 3.10 that has Down Syndrome, but Linux/Google/Code Aurora one)
30. Rom is odexed to significantly increase boot speed (under 30 seconds) and application start
31. Many more security features ported from Linux and Copperhead OS
32. Dns Crypt: a feature allowing to choose among many Dns providers (all encrypted)
33. Seccomp: secure computing enabled in kernel
Other features include: Layers Theme Engine; Native Call Recording with interface integrated in Dialer with no restrictions; Privacy Guard; Native Wakelock Blocker; Native Black List; Global Menu; Slim Recents; Traffic Indicators; Advanced Reboot; Slim Pie; CPU Info on Screen; Ram Bar in Recents; Supersu included and integrated in Settings; True Offline Charging with Screen Off; Kernel Adiutor included (unzip and install as a normal app) and integrated in Settings; FM Radio and Recording plus more
Things users need to know to have smooth experience:. These are not bugs, but rather an explanation of some features
1. If you want to do data encryption, keep in mind that unlike Android, Jaguar uses 256 bit encryption. If you were encrypted on other roms, you won't be able to decrypt. So, wipe encryption and then re-encrypt on Jaguar. Also, keep in mind that if you ever did factory reset on official TWRP 3+ for honami, your data partition is screwed and have to be resized to enable encryption. This has nothing to do with the rom, but rather with the official TWRP itself. Fastboot my unofficial TWRP 3.0.2, which, by the way has working brightness, as well as ability to decrypt and mount data
2. Jaguar contains a script running on early boot, which cuts the internet access to both WIFI and Data until Afwall is running. This is done to prevent leaking, as well as having all your internet traffic routed through some interesting number of servers, including this IP: 26.147.196.22. So, install Afwall and activate it, otherwise, no Internet for you
3. If your system language is different from English and you want to make changes in Phone/Cell Network settings, switch to English first, make the changes and then return to your language. The changes you made will hold. If you try to make the changes in your language, you will have com.android.phone crash. Localization takes time and is virtually impossible to implement in Jaguar, which is a one-person-rom
4. TimeKeep is ported from MM/N. Now time is set locally without the Internet or GSM signal. You need to set it once only and then TimeKeep will keep it current on each reboot, even if Airplane mode.
5. GAPPS: in order to escape f/c, you need to flash GAPPS right after the rom without reboot. If you reboot, you will have problems.
6. If you came from Kitkat directly to a custom LP (without having stock LP at least once), you might experience problems with hardware: gps/wifi irregularites. This applies to any custom rom above Kitkat. To remedy this, flash unmodified Sony stock LP 5.1.1, boot the phone and let it settle. Then you can reboot into fastboot and flash TWRP recovery. Then you can flash Jaguar
Download: All updates and change logs are in Post #3 now
Instructions:
1. You must have flashed and booted stock LP 5.1.1 once to upgrade your hardware (see explanation above)
2 Have TWRP (fastboot my unofficial version), unlocked bootloader and root
3. In TWRP, wipe data/factory reset, then wipe System/Data/Cache/Dalvik
4. Flash the rom
5. If you use xposed, flash the latest installer (As of October 2016 no longer works due to multiple implementations from Nougat)
6. Reboot, install Afwall and Kernel Adiutor as normal apps; activate Afwall to have Internet
7. Enjoy the rom, say thank you, donate or do both
Warning: If your device and/or anyone in the immediate vicinity dies, don't blame me: it is all China and Russia's fault. :laugh:
Credit: CM, AOSP, Slimroms, DU, Copperhead OS, Myself5 (kernel)
UPDATED KERNEL SOURCE: https://forum.xda-developers.com/devdb/project/dl/?id=23107 . Don't flash. This is not kernel, but rather sources to compile kernel
Kernel Sources: https://github.com/AOSP-Argon/android_kernel_sony_msm8974
XDA:DevDB Information
Jaguar Amami LP 5.1.1 r37 Official, ROM for the Sony Xperia Z1 Compact
Contributors
optimumpro
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP Slim DirtyUnicorn
Version Information
Status: Stable
Created 2016-06-11
Last Updated 2017-02-09
I broke my Z1 screen again and I am not in the mood for after market screens. And I am sick and tired of Sony crappy treatment of development community.
I am now looking at Lenovo Zuk Z2 or Z2 pro. Both excellent phones with the latest CPU and made out of metal and glass by Motorola which they bought from Google a couple of years ago. Zuk is friendly to developers and their blobs don't dumb down camera and they don't seek to "unify" bugs for all their devices. I no longer wish to support a fat bastard corporation that can't make a good phone, but thinks that just by putting their logo on the phone would make it worth $700.
RE Jaguar. I will continue to maintain Jaguar mainly with security patches... for a while, but my main work will be concentrated on Zuk. There is a lot of work to be done cleaning Android N and implementing security and other features from Jaguar...
Some screenshots: http://forum.xda-developers.com/showpost.php?p=62560391&postcount=2
February 9. New release:
1. February Security patches
2. DNS_Crypt (in settings/security)
3. Seccomp (secure computing implemented in kernel)
4. Open Source Superuser integrated
5. Silent SMS notification enabled
6. 1440p profile in camcorder added
7. Sony TimeKeep: now time is set locally without the Internet or GSM signal (you need to set it right the first time only)
8. Updated TWRP that now works with TimeKeep
If you enable Dnscrypt and you use Afwall, allow internet for apps running as root...
If you prefer closed source Supersu, just flash the zip...
Download Rom: https://forum.xda-developers.com/devdb/project/dl/?id=23073
Download TWRP: https://forum.xda-developers.com/devdb/project/dl/?id=23070
______________________________________________________
January 12: Updated release that includes a fully working NFC-HCE for Android Pay. It may be possible to bypass Safety Net by deleting Superuser or Supersu with su binary, as Lollipop doesn't have dm verity. Although, if the check includes bootloader status, you may be out of luck.
You may flash dirty on top of the previous Jaguar release.
Download: https://forum.xda-developers.com/devdb/project/dl/?id=22567
_________________________________________________________________
January 6: New release with January security patches from Google and Code Aurora. Also, qcom time service is back.
Download: https://forum.xda-developers.com/devdb/project/dl/?id=22449
You can flash on top of the previous release. Otherwise, read the OP (fresh install).
____________________________________________________________________________________
December 10. Rom updated to include:
1. December security patches
2. Signature spoofing (like in Omniroms)
3. USSD fixed (maybe)
Download: http://forum.xda-developers.com/devdb/project/dl/?id=22005
__________________________________________________________________________________
November 11. Rom updated to include November Security Patches. I have also removed Supersu, as there is a built-in root manager and quite a few people no longer trust the Chinese owned Supersu.
Download: http://forum.xda-developers.com/devdb/project/dl/?id=21448
________________________________________________________________________________
October 5. New release:
1. Kernel overclocked to 2803: experimental, I have used it for 10 days on Z1 without problems
2. October security patches from Google and Code Aurora
3. Over 80 commits from Google Master Gerrit which included changes to bionic, art, frameworks and system
4. Updated Afwall
5. Maybe more
This rom is now about 40% Nougat. One of the side effects: Xposed framework no longer works, but getting rid of it and instead using Privacy Guard is almost as good. Don't forget, Xposed is an exploit, which provides hooks for good and bad things.
Rom Download: http://forum.xda-developers.com/devdb/project/dl/?id=20791
Afwall/Kernel Adiutor Download: http://forum.xda-developers.com/devdb/project/dl/?id=20790
You can flash dirty if on a previous release
_________________________________________________________________________________
September 8. Rom updated to include:
1. September Google security patches
2. Latest Code Aurora patches https://www.codeaurora.org/projects/security-advisories
3. MPdecision is permanently disabled due to interfering with other hotplug and CPU frequencies. Default is MSMdecision, but you can pick several others in Kernel Adiutor
4. CPU overclock and underclock removed: no benefit whatsoever
5. More hardening ported from 3.18 kernel: https://android-review.googlesource.com/#/q/hardened,25 You won't find those on any rom custom or stock. This is from 3.18 kernel and it has nothing to do with Sony
6. About 70-80 commits from Android Master Branch. Folks. This is no longer a lollipop rom
7. PXN security feature implemented, which takes advantage of special instructions on ARMv7 to prevent unprivileged execution. See here: https://android-review.googlesource.com/#/c/265892/
8. Further integration of VOLTE
9. Kernel Adiutor: author has decided to go with Mobile Ads/Adview/Adbanner. So these were removed...
10. Camera: improvements to camera wrapper (missing entries), as well as some modifications in /frameworks/av/camera, so, you have a sharper picture. See photo attached, although, XDA reduces pictures... . This was taken with Open Camera.
Maybe more...
WARNING: you need to do one thing after flashing the rom: flash the latest stock baseband. BASEBAND ONLY. If you don't, you will only have LTE: no H+/H/2G. This is a one-time procedure and is due to Volte implementation. You have been warned. First flash the rom, then reboot, then flash the latest baseband. I don't want to hear cries: where is my 3G!
Download Rom: http://forum.xda-developers.com/devdb/project/dl/?id=20290
Download Afwall/Kernel Adiutor:http://forum.xda-developers.com/devdb/project/dl/?id=20288
You may flash dirty if on a previous release. Otherwise, clean flash...
So far so good but I noticed some bugs which come from CM trees - The scrolling is laggy (this fixed it http://review.cyanogenmod.org/#/c/109956/ ) screen is flickering with low brightness ( I made a fix but looks like I'm not able to complete it https://review.cyanogenmod.org/#/c/106545/ ) and WiFi Mac is wrong (starts with 00:00 and I think this commit fixed it https://review.cyanogenmod.org/#/c/117270/ ) Otherwise great ROM and thanks for the work!
optimumpro said:
This is Official Jaguar Rom LP 5.1.1 r37 which enjoyed over 4000 downloads at Xperia Z1 thread. Jaguar is the only LP rom that is being actively developed and maintained, which means latest sources including June security patches...
Important Disclaimer: I don't have Z1 compact, so, although unlikely, you may have non boot issues. So, back up your prior rom and don't complain, as for the purposes of Z1 compact, this is an experimental build...
As you all know, MM is still in bad alpha state, not to mention horrible camera and it will NOT get any better for many reasons such as: idiotic switching to AOSP (instead of CM) trees; and CM abandoning AOSP in favor of its own closed source OS. Pure AOSP has NEVER had a stable Z1 rom for any version of Android be it MM, LP, Kitkat or even Jeallybean. So, forget about MM. It is bad and isn't getting better.
Click to expand...
Click to collapse
Thanks for the rom, I look forward to trying it out. I must say, though, that we have seen at least a couple of AOSP/AOSP-based ROMs for our device that are developing nicely - fully functional and with good cameras. See DU by @SpiritCroc, and AOSP by @freexperia.
However, as far as CM goes, you're quite right. Several nice ROMs, but little camera progress.
Syssx said:
So far so good but I noticed some bugs which come from CM trees - The scrolling is laggy (this fixed it http://review.cyanogenmod.org/#/c/109956/ ) screen is flickering with low brightness ( I made a fix but looks like I'm not able to complete it https://review.cyanogenmod.org/#/c/106545/ ) and WiFi Mac is wrong (starts with 00:00 and I think this commit fixed it https://review.cyanogenmod.org/#/c/117270/ ) Otherwise great ROM and thanks for the work!
Click to expand...
Click to collapse
In Kernel Adiutor use Ondemandplus, multicore power saving disabled. Set timer_rate at 33000. Don't use mpdecision, instead use Msmpdecision hotplug with idle frequency set at 1497. Use intelithermal. You will also have cpu and gpu overclocked to 2457 and 600 respectively. Also voltage changing is in kernel. Screen flickering does not exist on Z1. I will look into it...
Edit: those old commits were in from the beginning...
12. Mandatory use of Afwall (no internet unless Afwall is activated)
Click to expand...
Click to collapse
Afwall+ has never worked right for me. It actually blocked some apps explicitly whitelisted, and some blacklisted apps would still go through it. I know OP is not to blame about this, but making it mandatory is a big "no" for me.
optimumpro said:
In Kernel Adiutor use Ondemandplus, multicore power saving disabled. Set timer_rate at 33000. Don't use mpdecision, instead use Msmpdecision hotplug with idle frequency set at 1497. Use intelithermal. You will also have cpu and gpu overclocked to 2457 and 600 respectively. Also voltage changing is in kernel. Screen flickering does not exist on Z1. I will look into it...
Edit: those old commits were in from the beginning...
Click to expand...
Click to collapse
Flickering occurs while Adaptive Brightness is on and when Brightness slider is on minimum value. Screen (and or backlight) just starts to flicker.
What gapps should I use fro this rom?
I tried opengapps but they make AOSP keyboard crash. (clean install)
Syssx said:
Flickering occurs while Adaptive Brightness is on and when Brightness slider is on minimum value. Screen (and or backlight) just starts to flicker.
Click to expand...
Click to collapse
Disable ambient display: it is broken on lp and wastes battery.
leonmorlando said:
Afwall+ has never worked right for me. It actually blocked some apps explicitly whitelisted, and some blacklisted apps would still go through it. I know OP is not to blame about this, but making it mandatory is a big "no" for me.
Click to expand...
Click to collapse
You need to use built in binaries for iptables and busybox (prefrences/binaries), as Google iptables are modified to allow certain traffic. Afwall is good in preventing all kinds of leaks, but it can't do anything until it runs and it does not run on boot. So, this rom has a script on early init that cuts the internet until the firewall starts. Without it all your internet traffic is routed through an ip like this one: 26.147.196.122.
Cant install Afwall+KernelAuditori.zip md5 failed
is it the reason why I cant use the internet via WLAN or Mobile Data? Because someone has written that a script block all internet traffic till AFWall is started?
com.android.phone FC when I try to set up some mobile settings by long holding the mobile strengh indikator
Edit: com.android.phone FC only in german language and not in english language
Thanks
AlexandreVegetaroux said:
Cant install Afwall+KernelAuditori.zip md5 failed
is it the reason why I cant use the internet via WLAN or Mobile Data? Because someone has written that a script block all internet traffic till AFWall is started?
com.android.phone FC when I try to set up some mobile settings by long holding the mobile strengh indikator
Edit: com.android.phone FC only in german language and not in english language
Thanks
Click to expand...
Click to collapse
You don't flash Kernel Adiutor and Afwall: unzip the file and install as normal apps, as it says in the OP.
With regard to phone FC, change the language to English, set whatever you need and then switch back to German...
Edit: this rom is not based on CM, which only recently implemented localizations/translations. My rom and development is a one person thing, so, it is not possible for me to do all localizations. However, as described above, you can set whatever you want in English and then switch back to your language: the settings will hold
optimumpro said:
Disable ambient display: it is broken on lp and wastes battery.
Click to expand...
Click to collapse
Man I dont think you got me right. The brightness values of CM sources are too low for Z1C (they are using stock ones and not sony ones) - this file is missing from sources with propper settings https://github.com/sonyxperiadev/de...rameworks/base/core/res/res/values/config.xml
//edit// so ive found that the values are here: https://github.com/CyanogenMod/andr...rameworks/base/core/res/res/values/config.xml and as you can see CM uses lowest value of "20" and SONY AOSP sources use "32" ( <item>32</item> <!-- 64 --> from their source)
no internet
no internet conection with this rom.what is wrong?
Syssx said:
Man I dont think you got me right. The brightness values of CM sources are too low for Z1C (they are using stock ones and not sony ones) - this file is missing from sources with propper settings https://github.com/sonyxperiadev/de...rameworks/base/core/res/res/values/config.xml
//edit// so ive found that the values are here: https://github.com/CyanogenMod/andr...rameworks/base/core/res/res/values/config.xml and as you can see CM uses lowest value of "20" and SONY AOSP sources use "32" ( <item>32</item> <!-- 64 --> from their source)
Click to expand...
Click to collapse
This rom has exactly the same value as in Sony that you linked: 10, 32, 64... . . Is there a reason CM abandoned that commit that had 13 instead of 10? But anyway, whatever the values are, don't set brightness to the extreme low and you won't have any flickering...
bubaliana said:
no internet conection with this rom.what is wrong?
Click to expand...
Click to collapse
You have to read the OP: Install afwall and kernel adiutor as normal apps (they are linked in the OP), set/activate Afwall and you will have the internet...
optimumpro said:
You need to use built in binaries for iptables and busybox (prefrences/binaries), as Google iptables are modified to allow certain traffic. Afwall is good in preventing all kinds of leaks, but it can't do anything until it runs and it does not run on boot. So, this rom has a script on early init that cuts the internet until the firewall starts. Without it all your internet traffic is routed through an ip like this one: 26.147.196.122.
Click to expand...
Click to collapse
you mean we need to follow these instructions http://forum.xda-developers.com/showpost.php?p=62560397&postcount=3?
BTW great rom,thanks for bringing it to Z1C section also:good:
broky said:
you mean we need to follow these instructions http://forum.xda-developers.com/showpost.php?p=62560397&postcount=3?
BTW great rom,thanks for bringing it to Z1C section also:good:
Click to expand...
Click to collapse
No. Since that I have integrated the changes in the rom. Right now all you need to do is to install and activate Afwall. It is simple: no afwall, no internet. Yes activated afwall - yes internet.
optimumpro said:
You have to read the OP: Install afwall and kernel adiutor as normal apps (they are linked in the OP), set/activate Afwall and you will have the internet...
Click to expand...
Click to collapse
Thank you for help.
[ROM][UNOFFICIAL][9.0] LineageOS 16.0 for Galaxy J4+ & J6+ [j4primelte & j6primelte]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 8 (oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
RIL (Calls, SMS, Data)
Wi-Fi
Bluetooth
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
GPS
NFC
Fingerprint on J6+
Sim slots
Flashlight
Mobicore keystore
Known issues:
VoLTE
Selinux is permissive
Instructions :
If you're on oreo, flash OneUI latest.
Download the latest build.
Reboot to recovery
Flash the latest build.
Optional: Flash GApps for Google Services and Magisk for root.
Reboot
Downloads :
All updates will be here.
Sources :
Device Tree
Vendor Blobs
Kernel Source
XDA:DevDB Information
[ROM][UNOFFICIAL][9.0] LineageOS 16.0 for Galaxy J4+/J6+ [j4primelte & j6primelte], ROM for the Samsung Galaxy J4+
Contributors
ataberkozen
Source Code: https://github.com/lineageos
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Pie, OneUI
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2020-01-29
Current Beta Version: 1.0
Beta Release Date: 2019-06-26
Created 2019-06-25
Last Updated 2020-01-29
Changelogs :
Stable version 1 - 29/01/2020 :
Now we are building vendor too. Goodbye OneUI vendor.
Happy news to J6+ users: my builds are now supporting j6primelte.
NFC is fixed on NFC variants.
Keystore is now fixed and got rid of aosp's software implementation. You don't need any hacks or tricks to make it work on GSIs.
SIM count detection added, single sim users won't have annoying second sim.
Previous build had dead flashlight sometimes. Fixed.
Removed Samsung's bloatwares.
RIL working delay after boot fixed.
And so much more that I did in past couple of months that I don't remember.
Public Beta 4 - 18/08/2019 :
MTP totally fixed.
Added FM Radio.
NFC should work now on FN users (Current device I have isn't NFC variant. I am not sure).
Public Beta 3 - 27/06/2019 :
Added USB and Bluetooth tethering.
Public Beta 2 - 26/06/2019 :
Lockscreen password fixed.
Audio on camcorder(video recording) fixed.
Autobrightness fixed.
Hotspot fixed.
MTP fixed.
Second SIM Slot fixed.
Public Beta 1 - 25/06/2019 :
First release.
Thanks to abhishek987 for thread template.
Screenshots on attachment.
Note(s) :
Send me logs if you've find any bug.
Reserved for just-in-case.
Please give me credits while building roms and sharing with my sources.
By hitting thanks button and following me on GitHub you can make me happy. Have fun!
Wow just wanna say thanks for this. But based on this sentence by you: "If you're on oreo, flash OneUI latest."
Does it mean that we need to upgrade it to Samsung Android Pie first?
Andhika24kd said:
Wow just wanna say thanks for this. But based on this sentence by you: "If you're on oreo, flash OneUI latest."
Does it mean that we need to upgrade it to Samsung Android Pie first?
Click to expand...
Click to collapse
Yes.
New update released. Enjoy.
ataberkozen said:
New update released. Enjoy.
Click to expand...
Click to collapse
hi ataberkozen.i must say thank you for this rom.i flash it today and is boot and all work. i have few questions if i may. in your device tree is write that architeture is armv7-a-neon,but when i compile rom then is warning about a53 is armv8-a-neon(not error just warning).,thats ok,i add line for armv8-a-neon and now is ok. then no vendorsetup.sh in device tree.dont be mad is just observation from my side.btw thank you very much for device tree,vendor tree and kernel for this device.:good: btw for people who want flash this device do as: Must be on pie;when flash twrp go to format data,write yes,go to advance wipe and wipe dalvik,cache,system,data;then Flash RMM Bypass and forceencrypt disabler and then flash rom and magisk.reboot.as i hate gapps i dont flash it.once again thanks on rom and other stuff and your hard work.
rudi021 said:
hi ataberkozen.i must say thank you for this rom.i flash it today and is boot and all work. i have few questions if i may. in your device tree is write that architeture is armv7-a-neon,but when i compile rom then is warning about a53 is armv8-a-neon(not error just warning).,thats ok,i add line for armv8-a-neon and now is ok. then no vendorsetup.sh in device tree.dont be mad is just observation from my side.btw thank you very much for device tree,vendor tree and kernel for this device.:good: btw for people who want flash this device do as: Must be on pie;when flash twrp go to format data,write yes,go to advance wipe and wipe dalvik,cache,system,data;then Flash RMM Bypass and forceencrypt disabler and then flash rom and magisk.reboot.as i hate gapps i dont flash it.once again thanks on rom and other stuff and your hard work.
Click to expand...
Click to collapse
Are you also building a ROM?
Geckyn said:
Are you also building a ROM?
Click to expand...
Click to collapse
yes.i build roms.i build also few gsi for j4+ just for test.but mostly for mtk devices.is my first samsung device.is my hobby. i have 55 years.
ataberkozen said:
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 8 (oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
RIL (Calls, SMS, Data)
Wi-Fi
Bluetooth
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
GPS
Known issues:
VoLTE
Selinux is permissive
Instructions :
If you're on oreo, flash OneUI latest.
Flash RMM Bypass and forceencrypt disabler from TWRP thread.
Download the latest build and GApps
Reboot to recovery
Flash the latest build and GApps
Optional: Flash magisk for root.
Reboot
Downloads :
All updates will be here.
Sources :
Device Tree
Vendor Blobs
Kernel Source
XDA:DevDB Information
[ROM][UNOFFICIAL][9.0] LineageOS 16.0 for Galaxy J4+ [j4primelte], ROM for the Samsung Galaxy J4+
Contributors
ataberkozen
Source Code: https://github.com/lineageos
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Pie, OneUI
Based On: LineageOS
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2019-06-26
Created 2019-06-26
Last Updated 2019-06-25
Click to expand...
Click to collapse
I tried to flash this on my SM-J415GN . It says on TWRP. "Size of image is larger than target device." How do i fix this? Thank you.
edit. I'm just dumb so uh nvm this. Lol
Necrosis Virus said:
I tried to flash this on my SM-J415GN . It says on TWRP. "Size of image is larger than target device." How do i fix this? Thank you.
edit. I'm just dumb so uh nvm this. Lol
Click to expand...
Click to collapse
Some notes and bugs encountered by me on J415F:
1) No face unlock option even after flashing GApps. Workaround: use other screen lock method
2) SIM 2 will be named as 'CARD 2' instead of its real name on many occasions. Workaround: Change your SIM 2 name manually from Settings -> Network & internet -> SIM Cards -> SIM slot 2. This may happen because your SIM carrier is unrecognized by Android
3) Samsung Pay and Samsung Max are there. Workaround: Remove the APKs manually using File Manager that supports root feature. They are located inside ./odm/app
4) If Android cant 'sign in to network' on SIM 1. It will display an error referring to SIM 2's name. It will also use mobile data from SIM 2 instead (pic 1, pic 2). No workaround
5) Bluelight filter not working (won't change settings). Workaround: Use 3rd party app to filter it (such as CF.Lumen)
6) Saved screenshot shows a blank preview image (on notification list). No workaround
7) Removing system apps cause bootloop. Workaround: Just disable it or use ADB to uninstall it instead (current user only)
8) MTP/PTP still not working, will show an error when copying files. Workaround: Use 3rd party file sharing apps like ShareIt or AirMore
9) Download manager is buggy, taking long time or failed to download something (for example Magisk module), or download file with strange name (instead of its real name on Jelly browser). Workaround: Restart the device at least once or use other browser like Chrome or Firefox (Lite)
10) 'Files' app shows an error when renaming file (but it actually works). No workaround
11) Bluetooth keeps stoping when accessed/enabled by apps (example: Google Play Games). No workaround?
12) When setting navigation bar to compact mode (or other mode), the 'change rotation' button (if you don't use auto rotate) will appear behind/on top of/in the middle of other navigation buttons. Workaround: Use the default one or use 'Gesture' navigation bar instead. This may happen if you change your screen 'Display size' (aka DPI) from Settings -> Display
13) Changing navigation bar to lefty/righty may cause the navigation bar to disappear. Workaround: Reboot the device at least once or use the same workaround as above
14) Changing home screen wallpaper will also change lock screen wallpaper and using custom image as wallpaper will cause the default 'Wallpaper' app to crash. Workaround: Use other app to change wallpaper (such as Google Wallpaper app)
15) Lock screen message does not appear, although emergency message/info works fine. Workaround: Change it and save it again (for the second time), if the problem stays reboot the device at least once
16) Keyboard will not appear on some conditions (like when writing app review on Play Store) and cause heavy lag or screen blinking. Workaround: Press home button and kill the 'hanging' app. Install alternative keyboard (such as G-Board or Simple Keyboard)
17) Changing accent color (from Settings -> Display -> Style) will not change 'Trebuchet' launcher accent color. Workaround: Change it to other color and save it again. If the problem persist force stop the launcher or reboot the device
18) 'Trebuchet' launcher is using light theme even after I change the system style color to Dark/AMOLED. Workaround: Change your wallpaper to a darker one
19) Notifications are still on white color even after I change the system style color to Dark/AMOLED. Workaround: Use 3rd party theming app (such as Substratum) or Xposed module or whatever
20) Signal bar is empty on both SIMs but mobile data, SMS, and phone work fine. No workaround?
21) Some apps notifications (like Messaging app) will be delayed or not showing up at all if 'Do no disturb' mode is activated. Workaround: Check it manually, of course
22) Minor UI bugs here and there that doesn't affect anything (maybe also DPI related issue) (pic 1, pic 2, pic 3). No workaround?
Some of this may be features/limitations of AOSP and LineageOS, not actually bugs. Tested on beta 3 release, will always update this post once I found new bugs. Thanks for the ROM by the way. Cheers
Andhika24kd said:
1) No face unlock option even after flashing GApps. Workaround: use other screen lock method
2) SIM 2 will be named as 'CARD 2' instead of its real name on many occasions. Workaround: Change your SIM 2 name manually from Settings -> Network & internet -> SIM Cards -> SIM slot 2. This may happen because your SIM carrier is unrecognized by Android
3) Samsung Pay and Samsung Max are there. Workaround: Remove the APKs manually using File Manager that supports root feature. They are located inside ./odm/app
4) If Android cant 'sign in to network' on SIM 1. It will display an error referring to SIM 2's name. It will also use mobile data from SIM 2 instead (pic 1, pic 2). No workaround
5) Bluelight filter not working (won't change settings). Workaround: Use 3rd party app to filter it (such as CF.Lumen)
6) Saved screenshot shows a blank preview image (on notification list). No workaround
7) Removing system apps cause bootloop. Workaround: Just disable it or use ADB to uninstall it instead (current user only)
8) MTP/PTP still not working, will show an error when copying files. Workaround: Use 3rd party file sharing apps like ShareIt or AirMore
9) Download manager is buggy, taking long time or failed to download something (for example Magisk module), or download file with strange name (instead of its real name on Jelly browser). Workaround: Restart the device at least once or use other browser like Chrome or Firefox (Lite)
10) 'Files' app shows an error when renaming file (but it actually works). No workaround
11) Bluetooth keeps stoping when accessed/enabled by apps (example: Google Play Games). No workaround?
12) When setting navigation bar to compact mode (or other mode), the 'change rotation' button (if you don't use auto rotate) will appear behind/on top of/in the middle of other navigation buttons. Workaround: Use the default one or use 'Gesture' navigation bar instead. This may happen if you change your screen 'Display size' (aka DPI) from Settings -> Display
13) Changing navigation bar to lefty/righty may cause the navigation bar to disappear. Workaround: Reboot the device at least once or use the same workaround as above
14) Changing home screen wallpaper will also change lock screen wallpaper and using custom image as wallpaper will cause the default 'Wallpaper' app to crash. Workaround: Use other app to change wallpaper (such as Google Wallpaper app)
15) Lock screen message does not appear, although emergency message/info works fine. Workaround: Change it and save it again (for the second time), if the problem stays reboot the device at least once
16) Keyboard will not appear on some conditions (like when writing app review on Play Store) and cause heavy lag or screen blinking. Workaround: Press home button and kill the 'hanging' app. Install alternative keyboard (such as G-Board or Simple Keyboard)
17) Changing accent color (from Settings -> Display -> Style) will not change 'Trebuchet' launcher accent color. Workaround: Change it to other color and save it again. If the problem persist force stop the launcher or reboot the device
18) 'Trebuchet' launcher is using light theme even after I change the system style color to Dark/AMOLED. Workaround: Change your wallpaper to a darker one
19) Notifications are still on white color even after I change the system style color to Dark/AMOLED. Workaround: Use 3rd party theming app (such as Substratum) or Xposed module or whatever
20) Signal bar is empty on both SIMs but mobile data, SMS, and phone work fine. No workaround?
21) Some apps notifications (like Messaging app) will be delayed or not showing up at all if 'Do no disturb' mode is activated. Workaround: Check it manually, of course
22) Minor UI bugs here and there that doesn't affect anything (maybe also DPI related issue) (pic 1, pic 2, pic 3). No workaround?
Some of this may be features/limitations of AOSP and LineageOS, not actually bugs. Tested on beta 3 release, will always update this post once I found new bugs. Thanks for the ROM by the way. Cheers
Click to expand...
Click to collapse
1-) OpenGApps telegram group aware of this problem, wait for them.
2-) Prepaid doesn't show for me too, but others shows.
3-) I'll disable it later.
4-) Send logs from telegram.
5-) I forgot to add lineage livedisplay while creating tree. I'll add next update.
6-) SkiaGL problematic on sd425, 425 phones are using opengl. I had to choose between fixing lags and other ui problems or working screenshot. I choose first one.
7-) You said yourself, removing system apps causes bootloop.
I'll fix it later.
9-) IDK is it problem or not but i am pretty sure isn't bcz of me.
10-) Same 9.
11-) I didn't faced problem while sending mp3, but if u you can send logs i'll check.
12-) Not my problem.
13-) Not bcz of me.
14-) I didn't faced but it's app bug really not my problem.
15-) Not my problem 2.
16-) You said yourself install gboard.
17-) Accent colors is overlay based. Bug isn't from my side.
1 App feature missing or buggy. Idk java I cannot fix.
19-) It's not problem by me, even official devices same.
20-) I am aware of this problem. I need to find a way to change it to rssi.
21-) Isn't this point of DND ? I am busy don't send me any notifications ?
22-) Set ro.lcd.density to 280 with build.prop editor and report back.
Sorry I'm quiet busy nowadays (and I'm sure you are). I will upload the log (you mean logcat, right?) when I have time. Yeah, some of these bugs are actually features on AOSP/LineageOS, I'm just informing other users in case it's their first time switching from Samsung ROM to LineageOS or AOSP based ROM.
11) I didn't use the Bluetooth directly, Google Play Games used it to find a match with nearby player on the game "Bowmasters", will send logcat later.
16) Installing Gboard doesn't help, I already tried that 3-4 days ago.
19) Yes, I'm just informing the others in case they never tried LineageOS/AOSP before. However some unofficial LineageOS have that. Of course I'm not asking you to make/merge it, I don't care about themes.
22) Setting it to 280 doesn't help so far, but I think I need more time to see if it works or not.
Andhika24kd said:
8) MTP/PTP still not working, will show an error when copying files. Workaround: Use 3rd party file sharing apps like ShareIt or AirMore
Click to expand...
Click to collapse
This is a real show-stopper.
@ataberkozen :
When you hopefully fix this soon, will I be able to simply flash your new ROM version on top of the current one, or will I have to clean flash the phone first ?
breversa said:
This is a real show-stopper.
@ataberkozen :
When you hopefully fix this soon, will I be able to simply flash your new ROM version on top of the current one, or will I have to clean flash the phone first ?
Click to expand...
Click to collapse
I fixed it yesterday, a new update expected today. Yes you can flash dirty.
Awesome work, @ataberkozen ! I can't wait !
---------- Post added at 13:20 ---------- Previous post was at 12:37 ----------
ataberkozen said:
I fixed it yesterday, a new update expected today. Yes you can flash dirty.
Click to expand...
Click to collapse
Now that's weird… I installed lineage-16.0-20190627-UNOFFICIAL-j4primelte while waiting for your new build, but MTP works without problem… I'm confused ! ^^
However, I can't connect to any hidden wifi. Seems to be an Android 9 issue though, as I encountered the same issue earlier today with another Android 9 ROM*: https://forum.xda-developers.com/showpost.php?p=79888858&postcount=10
breversa said:
Awesome work, @ataberkozen ! I can't wait !
---------- Post added at 13:20 ---------- Previous post was at 12:37 ----------
Now that's weird… I installed lineage-16.0-20190627-UNOFFICIAL-j4primelte while waiting for your new build, but MTP works without problem… I'm confused ! ^^
However, I can't connect to any hidden wifi. Seems to be an Android 9 issue though, as I encountered the same issue earlier today with another Android 9 ROM*: https://forum.xda-developers.com/showpost.php?p=79888858&postcount=10
Click to expand...
Click to collapse
MTP fails while copying from phone to pc.
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Whats works:
Booting
Audio
Graphics
RIL (calls, sms, mobile data)
Wi-Fi, Wi-Fi Direct
Bluetooth
GPS, GLONASS
FM Radio
Sensors
Camera
Face Unlock
Video recording
Screen cast
Offline charging
SELinux (enforcing)
SafetyNet (with hidden Magisk or without root)
Tell me, if something does not work.
FAQ
Q: Does this ROM supports double tap to wake? A: No. And will not in future.
Q: Cannot add widgets to home screen. Widgets is not supported? A: Widgets is not supported in builtin launcher. Download any third-party home app (like Nova Launcher) and enjoy!
Q: Why split screen mode is not available? How to enable? A: Due to Android Go limitations, all forms of multiwindowing is not available on this edition of Android.
Q: When my app "foo" asks permission to access to notifications or to run on top of other apps, I see "This feature is disabled"... A: This is limitations of Android Go to save memory.
Q: Cannot use my sdcard as primary storage! A: This feature is unstable and excluded from ROM.
Q: Flashed this ROM but phone don't booting! A1: Boot to recovery and wipe /data, then reboot. A2: If your /data is formatted to f2fs, format it to ext4 and boot your phone.
Q: What is "Gapps for Android Go"? A: This is Gapps set, extracted as-is from Nokia 1 Plus Android 11 Go firmware and packaged for Lenovo A6000. Nothing removed, just fixed some permissions and added Google Camera Go.
Installation
Flash latest recovery (if needed), based on TWRP >= 3.2
Reboot to recovery
Wipe /cache and /data. If your /data is formatted in f2fs, format it in ext4, otherwise OS will not boot.
Flash the rom
Flash Gapps (Gapps for Android Go or OpenGapps ARM/Android 11/pico or nano)
Flash Magisk (also if needed)
Reboot to ROM
Spoiler: Latest changes
Build 05.09:
August security patch level
ROM is signed with release-keys
Build variant now is user, not userdebug
Updates from Lineage OS team
Clipboard access notification
USB fast charging toggler
Some OEM Android Go tweaks (from Nokia, ZTE)
New default wallpaper
Stricten background limits: 2 apps for 1/8 and 4 for 2/16
Recents is limited to 4 apps
Reworked WiFi and Tethering configuration overlays
Added overlays for Gboard, MessagesGo
Disabled caching in Trebuchet (launcher is fast enough to allow us to save some amount of memory)
zRam switched to Zstandart compression algorithm
Implemented clean page protection to reduce lags under memory pressure
Disabled rounded corners in UI
SEPolicy fixes
Misc...
NOTE: Strongly not recommended "dirty" updating. If you want to do this anyway, flash migration script before flashing the ROM!
Migration script: https://drive.google.com/file/d/15hB63RkyRpCljho9jyFTHoYWvCl4cDWe/view?usp=drivesdk
Download ROM: https://drive.google.com/file/d/1vUHuS18vDowwCSIWl8Dl4xxRHR4EHir0/view?usp=drivesdk
Gapps: Gapps for Android Go(updated!) or OpenGapps (ARM, pico or nano)
Credits to:
twain55
Moto-M8916 guys
Teo Flo
dev_harsh1998
SkepticOne
Nitrogradient
IvanHephaestus
Our Telegram discussion group: Lenovo A6000/Plus Community Discussions
Contributors
acroreiser
dev_harsh1998
Source code
Device tree: https://github.com/acroreiser/android_device_lenovo_a6000
Kernel tree: https://github.com/acroreiser/android_kernel_lenovo_a6000
Vendor tree: https://github.com/acroreiser/android_vendor_lenovo_a6000
ROM OS Version: Android 11 Go
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Hex Firmware Patch, TWRP >= 3.2
Based On: LineageOS
Version Information
Status: Stable
Created 2021-05-12
Last Updated 2021-09-13
Finally android 11 for a6000 thank you
Wow, I thought the previous version (17.1) is the last one for this device.
I am really happy I was wrong!
Thank you so much for your work acroreiser and dev_harsh1998. Also thanks to everyone who is credited!
First of all thanks to all the Devs who have kept this device still alive by providing it with those up to date roms...
Well I am using this rom for last 3 days i must say its super smooth apps are opening blazing fast, all major functions are working properly and it can be used as a daily driver for sure...
Now I encounter one bug so far its in Camera Go app the thing is when i change the storage location to SD card and start video recording than it suddenly freezes after some seconds by saying "Something went wrong " than i need to restart the app for using it again, by the way when i change the storage location back to internal than video recording is working fine so its really not bothering me that much....
There is one more thing well its not a bug its just my observation with this rom that during charging its heat up more than expected even when its charging at 90% to 100% slot which i never experience with any other roms.
All in all still its worth a shot everything's working fine, thanks to the devs again...
[email protected] said:
First of all thanks to all the Devs who have kept this device still alive by providing it with those up to date roms...
Well I am using this rom for last 3 days i must say its super smooth apps are opening blazing fast, all major functions are working properly and it can be used as a daily driver for sure...
Now I encounter one bug so far its in Camera Go app the thing is when i change the storage location to SD card and start video recording than it suddenly freezes after some seconds by saying "Something went wrong " than i need to restart the app for using it again, by the way when i change the storage location back to internal than video recording is working fine so its really not bothering me that much....
There is one more thing well its not a bug its just my observation with this rom that during charging its heat up more than expected even when its charging at 90% to 100% slot which i never experience with any other roms.
All in all still its worth a shot everything's working fine, thanks to the devs again...
Click to expand...
Click to collapse
The problem is in the application itself. in the firmware the application is of the old version and there should be no problems with the video. But it is automatically updated to the latest version in the Playmarket and there is a problem. Remove the app update and it will work as expected.
Teo Flo said:
The problem is in the application itself. in the firmware the application is of the old version and there should be no problems with the video. But it is automatically updated to the latest version in the Playmarket and there is a problem. Remove the app update and it will work as expected.
Click to expand...
Click to collapse
Thanks for the info, I will try that for sure...
Hey devs,
Thanks for this brand new ROM! I use this phone as a daily driver and wanted your advice on this version or the 17.1 version. Which one is likely to be maintained in the future? I understand that 17.1 is stable but will it still get more updates or security patches or should I go ahead with this 18.1 version, please?
Thank you for your help and also for keeping this phone alive in 2021.
Cheers,
S
santoshwins said:
Which one is likely to be maintained in the future?
Click to expand...
Click to collapse
Currently Lineage OS 18.1 is maintained.
Both 17.1 and 18.1 is based on my Go device tree (forked from @dev_harsh1998 lineage-16.0 tree) but lineage-17.1 branch is not maintained since february 2021.
I don't know is @twain55 can maintain 17.1 builds for a long time (better ask him).
Lineage OS 18.1 is pretty stable for daily usage by user reports and my experience with a6010 (I don't have a6000 and primarily maintaining a6010 with merging stable changes to a6000 tree).
Can a dirty flash be done from 17.1 ?
Zack316 said:
Can a dirty flash be done from 17.1 ?
Click to expand...
Click to collapse
Of course no.
New build is up!
Changes:
June security patch level
Updates from Lineage OS team
Memory and performance optimizations for 1/8 devices
Forward-ported qcom memory optimizations (frameworks/base)
Updated Binder driver (kernel)
Implemented automatic background apps memory reclaim (kernel)
Restored Qualcomm VP8 and HEVC codecs
Updated Bluetooth HAL from Nokia 1.3
Updated some media blobs
Some kernel tweaks from other low ram devices (Redmi Go, Nokia 1.3)
Workaround for broken video recording in recent versions of Google Camera Go
Recent apps screen is limited to 5 apps to save memory
Killed multiuser support - Go devices should not have this. Also this feature is pointless in our ancient phones...
Download: https://drive.google.com/file/d/1IqRTbY9CYH9Je3bmqaavjQHnn-763bx5/view?usp=drivesdk
Wow, thank you so much for the android 11 version. It is minimalistic and smooth. Loved the rom. Also thank you devs for keeping this device alive.
Needs Undervolting.
Even the standby drain is around 600ma.
Also I've bought a new battery for this, even that cannot survive more than an hour of SOT.
Please optimised the kernel or just undervolt it a bit.
Also only one of the back speaker is working,
Hi , Dear
Thank you for your your creativity
For Lenovo A6000 1G Ram & 8Gb Rom
Which version is the best 17.1 or 18.1 ??
Can i flash Twrp 3.2 on kitkat or must to be on Lolipop ??
Cheers ^_^
so this rom i cannot use my sd card right? that's super bad for me!
-ARiCK- said:
so this rom i cannot use my sd card right? that's super bad for me!
Click to expand...
Click to collapse
There is no problem with the firmware for using the SD card
I keep getting the "This build is signed with public key" error notification every time at startup.
New build us up!
Quick changelog:
August security patch level
ROM is signed with release-keys
Build variant now is user, not userdebug
Updates from Lineage OS team
Clipboard access notification
USB fast charging toggler
Some OEM Android Go tweaks (from Nokia, ZTE)
New default wallpaper
Stricten background limits: 2 apps for 1/8 and 4 for 2/16
Recents is limited to 4 apps
Reworked WiFi and Tethering configuration overlays
Added overlays for Gboard, MessagesGo
Disabled caching in Trebuchet (launcher is fast enough to allow us to save some amount of memory)
zRam switched to Zstandart compression algorithm
Implemented clean page protection to reduce lags under memory pressure
Disabled rounded corners in UI
SEPolicy fixes
Misc...
Read notes in OP before installing!
Installed the latest build. Thank you. Great work . Everything is working very good. Battery life is extremely good. Got 7-8 hours full HD youtube playback on 4g. Go version is working very smoothly ( previously was using android 5.0 stock )
...
I also have another device 10or.E which has similar SoC SD430. Can you tell me step by step instructions. Kernel source is available. ( I read about building but did not clearly understand various terms like vendor etc... Tried to create initial .mk files for the board but errors at luch command itself )
Disclaimer:
LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
How to Install:
1- BACKUP, BACKUP, BACKUP, All will be WIPED!
2 - Unlock bootloader instructions here
3 - Flash the new mandatory TWRP Recovery
4 - Move Rom & Gapps (optional) into device storage
5 - Full Wipes
6- Flash Rom & Gapps (gapps are OPTIONAL)
for GAPPS:
Choose Gapps Package "ARM" > "7.1" > "Pico" or "Nano" visit OpenGAPPS
Working:
It Boots
Storages
Wifi
Audio
Charging
Offline Charging
Video decoding / Playback (i.e.: Youtube) up to 720p
Sensor: magnetometer: akm8963
Bluetooth (basic functions, pairing, file transfer, a2dp (Audio))
GPS - GNSS
DRM Widevine : For Netflix, Amazon Prime, etc
Front Camera: mt9m114_mipi_raw
Front camera: GC0339_RAW
ZRAM swap ( LZ4 )
etc ....
NOT Working:
Rear Camera: a5142_mipi_raw
Sensors: accelerometer (autorotation)
You tell me
Special Thanks
OMNI Rom
LineageOS
DerTeufel1980 & fire855 ( my Team mates from M.A.D)
GPL Compliance:
GitHub - dragonpt/android_device_asus_me173x: ASUS ME173x device for LineageOS 12.1 & LineageOS 13
ASUS ME173x device for LineageOS 12.1 & LineageOS 13 - GitHub - dragonpt/android_device_asus_me173x: ASUS ME173x device for LineageOS 12.1 & LineageOS 13
github.com
GitHub - dragonpt/android_kernel_asus_me173x_new: ASUS ME173x [MT6589 - MT8125] Custom Kernel for LineageOS 12.1 / 13 / 14.1
ASUS ME173x [MT6589 - MT8125] Custom Kernel for LineageOS 12.1 / 13 / 14.1 - GitHub - dragonpt/android_kernel_asus_me173x_new: ASUS ME173x [MT6589 - MT8125] Custom Kernel for LineageOS 12.1 / 13 / ...
github.com
--> "asus_n" branchs
FAQ
Small FAQ:
Q: How can i Unlock the Bootloader?
A: Instructions for Unlocking the Bootloader can be found here
Q: After locking the screen, the screen is all black, and /or flickering and I'm forced to reboot, how can I fix this?
A: If you have this issue, then your device uses the second screen/lcm hardware revision
( the lgld070wx3_dsi_vdo ), please use the second kernel.zip for this variant, it'll be added an second kernel . zip for people with this variant, on the download section with the ROM release
Q: how to flash this second kernel for the new hardware variant ?
A: After flashing the ROM, flash the second kernel afterwards
Q: Where are the Developer Options?
A: Go to Settings>About Tablet, and tap 7 times on the Build Number
Q: How can i enable the Advance Restart?
A: in the developer options, you can enable it there
Q: How can i change the WebView implementation?
A: in the developer options.
Q: How can i root this rom?
A: you can use Magisk
Magisk: v.23
note: Magisk builds v24.x and v25.x do NOT work / Not fully tested
Q: Do i really need to update recovery?
A: YES
--> If you already have Lineage13 TWRP release, your OK
Q: I can't flash this Rom on recovery "X Y Z" why?
A: You need to update your recovery to TWRP
Q: how to work with twrp?
A: in the first time TWRP boots, it'll ask if you want to allow modifications, slide to YES
Q: how to wipe and flash in twrp?
A: Go "mount" and mount "system"
then go "wipe" > and wipe dalvik / cache / data / System
Q: How can i flash the new recovery?
A: If you already have an custom recovery installed:
Download the new TWRP recovery zip
flash the new recovery
reboot to recovery again, TWRP should be now installed
If you don't have any custom recovery installed:
- You can extract the "recovery.img" from the .zip
- Open an terminal
- Boot to fastboot mode, and type:
Code:
fastboot flash recovery recovery.img
then reboot:
Code:
fastboot reboot
Q: I Love your work, how can i thank you?
A: You can press the "Thanks" button, and if you wish, you can pay me a beer
..
Changelogs
Build 20220808
First Release
Build 20220820
Fix Advance reboot Menu (removed: reboot bootloader, isn't used)
ZRAM: Increase disk size to 768MB (recommended for 1GB Ram devices)
ZRAM: Boost performance: Actually enable LZ4 compression ( inline with current kernel)
ART: Update flags (Drop old flags, Drop uneeded dex2oat, force dex2oat not to use swap file ,etc)
Enable Pinner Service: pinning files into memory, boot oat, services dex (Improves system performance)
Removed LOW RAM flag:
- Device tree & kernel has been greatly optimized
- We finnaly have working ZRAM swap since los 13, working great
- There's no need to cripple the device out of useful features like MultiUser
Fix GPS
Fix DRM Widevine : For Netflix, Amazon Prime, etc
Fix Bluetooth (basic functions, pairing, file transfer)
- Bluetooth a2dp (Audio) is still broken (work in progress)
Fix Front Camera: mt9m114_mipi_raw / GC0339_RAW ( photos )
Some optimizations done at frameworks
Build 20220911
Fix Bluetooth a2dp (Audio)
Removed Useless LineageOS apps for more free RAM
WLAN: Update blobs from MediaTek ALPS N1
LCM: lgld070wx3_dsi_vdo: Fix flickering on resume, discharge ESD properly
Improved System Animations
Fix FWB SysUI / StatusBar, power leak
Fix FWB ArraySet crash
Fix FWB backup schedule system_server crash
Fix FWB batterySendBroadcast not synchronized issue
Fix FWB SystemUI FC due to Google Assistant
Fix FWB hwui: skip empty frame
Fix FWB system server crash caused by CME in usage stats
Fix FWB batterySendBroadcast not synchronized issue
Fix FWB PackageManagerService user CE data failed
Downloads
TWRP 3.1.1
TWRP_3.1.1_ME173X.zip | by superdragonpt for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
Build 20220911
https://www.androidfilehost.com/?fid=14871746926876822197
If you have the second hardware Screen revision by LG (check FAQ), flash this
kernel for the Build 20220911
https://www.androidfilehost.com/?fid=14871746926876822201
Older Builds
Build 20220808
https://www.androidfilehost.com/?fid=15664248565197201611If you have the second hardware Screen revision by LG (check FAQ), flash this
kernel for the Build 20220808
https://www.androidfilehost.com/?fid=15664248565197201606
Build 20220820
https://www.androidfilehost.com/?fid=15664248565197206369
If you have the second hardware Screen revision by LG (check FAQ), flash this
kernel for the Build 20220820
https://www.androidfilehost.com/?fid=15664248565197206372
The year is 2082. Society as we know it has collapsed and the world is but a nuclear wasteland. I haven't seen or talked to another human in weeks. Food is scarce and shelter is hard to come by... But life lingers on, even if just for a while longer, nature tries to heal itself with the little sunlight that manages to reach the ground through the dense clouds of soot. Last night I heard screams coming from the forest of dead pine trees, east of the abandoned glass factory. I'm not sure if they were human screams or the calls of an alternate, but I'm not eager to find out... I must hurry and head north, this place is no longer safe. To add insult to injury, I broke my only weapon while I was trying to cut down a few tree branches to light a fire... until I find materials to fix it, my possessions are my pet dog Alex, an half eaten can of beans and my ME173X running Android 69 with the latest security updates.
I'm waiting for the continuation and publication of this work in the form of a book.
Haha
This made my day
Cheers
superdragonpt said:
Disclaimer:
LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
How to Install:
1- BACKUP, BACKUP, BACKUP, All will be WIPED!
2 - Unlock bootloader instructions here
3 - Flash the new mandatory TWRP Recovery
4 - Move Rom & Gapps (optional) into device storage
5 - Full Wipes
6- Flash Rom & Gapps (gapps are OPTIONAL)
for GAPPS:
Choose Gapps Package "ARM" > "7.1" > "Pico" or "Nano" visit OpenGAPPS
Working:
It Boots
Storages
Wifi
Audio
Charging
Offline Charging
Video decoding / Playback (i.e.: Youtube) up to 720p
Sensor: magnetometer: akm8963
etc ....
NOT Working:
Bluetooth
GPS - GNSS
DRM Widevine : For Netflix, Amazon Prime, etc
Front Camera: mt9m114_mipi_raw
Front camera: GC0339_RAW
Rear Camera: a5142_mipi_raw
Sensors: accelerometer (autorotation)
You tell me
Special Thanks
OMNI Rom
LineageOS
DerTeufel1980 & fire855 ( my Team mates from M.A.D)
GPL Compliance:
GitHub - dragonpt/android_device_asus_me173x: ASUS ME173x device for LineageOS 12.1 & LineageOS 13
ASUS ME173x device for LineageOS 12.1 & LineageOS 13 - GitHub - dragonpt/android_device_asus_me173x: ASUS ME173x device for LineageOS 12.1 & LineageOS 13
github.com
GitHub - dragonpt/android_kernel_asus_me173x_new: ASUS ME173x [MT6589 - MT8125] Custom Kernel for LineageOS 12.1 / 13 / 14.1
ASUS ME173x [MT6589 - MT8125] Custom Kernel for LineageOS 12.1 / 13 / 14.1 - GitHub - dragonpt/android_kernel_asus_me173x_new: ASUS ME173x [MT6589 - MT8125] Custom Kernel for LineageOS 12.1 / 13 / ...
github.com
--> "asus_n" branchs
Click to expand...
Click to collapse
This is great! Thank you so much! I never expected so much support for this tablet...
Unfortunately, I really need GPS so I have to wait for another build...
Thank you very much for providing builds for this tablet! The 13 build really helped us a lot, as our 2-year-old could watch downloaded Peppa Pig episodes from Netflix during long vacation drives. Although I did had to download a previous major version of the Netflix APK to get it to work on Android 6.
As this version doesn't have Widevine DRM, Netflix won't work, I guess. The current version of Netflix from the app store needs at least Android 7, so it would be nice if this new build would also support that in the future. Is it possible to flash that somehow, or would you need to compile that during build-time? If so, it that planned, or are there any technical difficulties regarding that?
New Build is up
Build 20220820
Fix Advance reboot Menu (removed: reboot bootloader, isn't used)
ZRAM: Increase disk size to 768MB (recommended for 1GB Ram devices)
ZRAM: Boost performance: Actually enable LZ4 compression ( inline with current kernel)
ART: Update flags (Drop old flags, Drop uneeded dex2oat, force dex2oat not to use swap file ,etc)
Enable Pinner Service: pinning files into memory, boot oat, services dex (Improves system performance)
Removed LOW RAM flag:
- Device tree & kernel has been greatly optimized
- We finnaly have working ZRAM swap since los 13, working great
- There's no need to cripple the device out of useful features like MultiUser
Fix GPS
Fix DRM Widevine : For Netflix, Amazon Prime, etc
Fix Bluetooth (basic functions, pairing, file transfer)
- Bluetooth a2dp (Audio) is still broken (work in progress)
Fix Front Camera: mt9m114_mipi_raw / GC0339_RAW ( photos )
Some optimizations done at frameworks
cheers
Which Lineage version is the fastest?
bravur said:
Which Lineage version is the fastest?
Click to expand...
Click to collapse
Lineage !4 is on-pair with LOS13.
Lineage14 is currently the best if you ask me
New Build is up
Build 20220911
Fix Bluetooth a2dp (Audio)
Removed Useless LineageOS apps for more free RAM
WLAN: Update blobs from MediaTek ALPS N1
LCM: lgld070wx3_dsi_vdo: Fix flickering on resume, discharge ESD properly
Improved System Animations
Fix FWB SysUI / StatusBar, power leak
Fix FWB ArraySet crash
Fix FWB backup schedule system_server crash
Fix FWB batterySendBroadcast not synchronized issue
Fix FWB SystemUI FC due to Google Assistant
Fix FWB hwui: skip empty frame
Fix FWB system server crash caused by CME in usage stats
Fix FWB batterySendBroadcast not synchronized issue
Fix FWB PackageManagerService user CE data failed
First of all: thank you so much for giving us Andoid 7 for this old thing!
I just found out that Adaway won't install from F-Droid:
Error installing AdAway
Parsing apk file failed! Maybe minSdk of apk is lower than current Sdk? Look into logcat for more specific warnings of Android's PackageParser.
My observations of LG kernel up to 20220911
- battery charging VERY slow
- rotation sensor not working
- camera not working
- fast stock, slow with GAPPS
Maybe these are already on the todo list. Great to have A7 on this still usable tablet.
Cheers
pimisen said:
First of all: thank you so much for giving us Andoid 7 for this old thing!
I just found out that Adaway won't install from F-Droid:
Error installing AdAway
Parsing apk file failed! Maybe minSdk of apk is lower than current Sdk? Look into logcat for more specific warnings of Android's PackageParser.
Click to expand...
Click to collapse
Yup that's normal, im also an user of it
see here: https://github.com/AdAway/AdAway
"For devices older than Android 8 Oreo, use the version 4 of AdAway."
Get the last version here:
Releases · AdAway/AdAway
AdAway is a free and open source ad blocker for Android. - AdAway/AdAway
github.com
Version 4.3.6 > on Assets download " AdAway-4.3.6-200726.apk "
cheers
tweakradje said:
My observations of LG kernel up to 20220911
- battery charging VERY slow
- rotation sensor not working
- camera not working
- fast stock, slow with GAPPS
Maybe these are already on the todo list. Great to have A7 on this still usable tablet.
Cheers
Click to expand...
Click to collapse
hi
rotation sensor not working :
Yeah this is stated on the "not working" status " > Sensors: accelerometer (autorotation)"
I could never fixed this sensor on my kernel
battery charging VERY slow
The device can be very picky with chargers, with the stock charger it can charge up to 1.2 AMP @ 5v
fast stock, slow with GAPPS
Yeah GAPPS really have an huge impact on devices, it runs really smooth without GAPPS installed
Google sucks
camera not working
This is very nice report ( Thanks ) every single user that reported me the front camera isn't working has an device with the LG screen...
I just bought my third ASUS ME173X and got it yesterday ( since my kid broke the second one .. )
unfortunately all my tablets have the same nt35521 Screen ( really hopping to grab an LG variant ) for testing :/
cheers
How can I find out, what screen our tablet has?
Plz help! I can't root this rom, can you give a manual or something? I've tryed everything
sus ඞ
This is with the tablet plugged into the wall 24/7, sometimes it gets tired and stops charging
Don't mind the second pic, that's just it being used as a wireless monitor
bravur said:
How can I find out, what screen our tablet has?
Click to expand...
Click to collapse
You need to be running any of stock firmware with root rights.
There's many apps that facilitate the task like "deviceinfohw" , give the app root on settings, and on the main page it'll show you what LCM you device has.