Disclaimer:
LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
How to Install:
1- BACKUP, BACKUP, BACKUP, All will be WIPED!
2 - Unlock bootloader instructions here
3 - Flash the new mandatory TWRP Recovery
4 - Move Rom & Gapps (optional) into device storage
5 - Full Wipes
6- Flash Rom & Gapps (gapps are OPTIONAL)
for GAPPS:
Choose Gapps Package "ARM" > "7.1" > "Pico" or "Nano" visit OpenGAPPS
Working:
It Boots
Storages
Wifi
Audio
Charging
Offline Charging
Video decoding / Playback (i.e.: Youtube) up to 720p
Sensor: magnetometer: akm8963
Bluetooth (basic functions, pairing, file transfer, a2dp (Audio))
GPS - GNSS
DRM Widevine : For Netflix, Amazon Prime, etc
Front Camera: mt9m114_mipi_raw
Front camera: GC0339_RAW
ZRAM swap ( LZ4 )
etc ....
NOT Working:
Rear Camera: a5142_mipi_raw
Sensors: accelerometer (autorotation)
You tell me
Special Thanks
OMNI Rom
LineageOS
DerTeufel1980 & fire855 ( my Team mates from M.A.D)
GPL Compliance:
GitHub - dragonpt/android_device_asus_me173x: ASUS ME173x device for LineageOS 12.1 & LineageOS 13
ASUS ME173x device for LineageOS 12.1 & LineageOS 13 - GitHub - dragonpt/android_device_asus_me173x: ASUS ME173x device for LineageOS 12.1 & LineageOS 13
github.com
GitHub - dragonpt/android_kernel_asus_me173x_new: ASUS ME173x [MT6589 - MT8125] Custom Kernel for LineageOS 12.1 / 13 / 14.1
ASUS ME173x [MT6589 - MT8125] Custom Kernel for LineageOS 12.1 / 13 / 14.1 - GitHub - dragonpt/android_kernel_asus_me173x_new: ASUS ME173x [MT6589 - MT8125] Custom Kernel for LineageOS 12.1 / 13 / ...
github.com
--> "asus_n" branchs
FAQ
Small FAQ:
Q: How can i Unlock the Bootloader?
A: Instructions for Unlocking the Bootloader can be found here
Q: After locking the screen, the screen is all black, and /or flickering and I'm forced to reboot, how can I fix this?
A: If you have this issue, then your device uses the second screen/lcm hardware revision
( the lgld070wx3_dsi_vdo ), please use the second kernel.zip for this variant, it'll be added an second kernel . zip for people with this variant, on the download section with the ROM release
Q: how to flash this second kernel for the new hardware variant ?
A: After flashing the ROM, flash the second kernel afterwards
Q: Where are the Developer Options?
A: Go to Settings>About Tablet, and tap 7 times on the Build Number
Q: How can i enable the Advance Restart?
A: in the developer options, you can enable it there
Q: How can i change the WebView implementation?
A: in the developer options.
Q: How can i root this rom?
A: you can use Magisk
Magisk: v.23
note: Magisk builds v24.x and v25.x do NOT work / Not fully tested
Q: Do i really need to update recovery?
A: YES
--> If you already have Lineage13 TWRP release, your OK
Q: I can't flash this Rom on recovery "X Y Z" why?
A: You need to update your recovery to TWRP
Q: how to work with twrp?
A: in the first time TWRP boots, it'll ask if you want to allow modifications, slide to YES
Q: how to wipe and flash in twrp?
A: Go "mount" and mount "system"
then go "wipe" > and wipe dalvik / cache / data / System
Q: How can i flash the new recovery?
A: If you already have an custom recovery installed:
Download the new TWRP recovery zip
flash the new recovery
reboot to recovery again, TWRP should be now installed
If you don't have any custom recovery installed:
- You can extract the "recovery.img" from the .zip
- Open an terminal
- Boot to fastboot mode, and type:
Code:
fastboot flash recovery recovery.img
then reboot:
Code:
fastboot reboot
Q: I Love your work, how can i thank you?
A: You can press the "Thanks" button, and if you wish, you can pay me a beer
..
Changelogs
Build 20220808
First Release
Build 20220820
Fix Advance reboot Menu (removed: reboot bootloader, isn't used)
ZRAM: Increase disk size to 768MB (recommended for 1GB Ram devices)
ZRAM: Boost performance: Actually enable LZ4 compression ( inline with current kernel)
ART: Update flags (Drop old flags, Drop uneeded dex2oat, force dex2oat not to use swap file ,etc)
Enable Pinner Service: pinning files into memory, boot oat, services dex (Improves system performance)
Removed LOW RAM flag:
- Device tree & kernel has been greatly optimized
- We finnaly have working ZRAM swap since los 13, working great
- There's no need to cripple the device out of useful features like MultiUser
Fix GPS
Fix DRM Widevine : For Netflix, Amazon Prime, etc
Fix Bluetooth (basic functions, pairing, file transfer)
- Bluetooth a2dp (Audio) is still broken (work in progress)
Fix Front Camera: mt9m114_mipi_raw / GC0339_RAW ( photos )
Some optimizations done at frameworks
Build 20220911
Fix Bluetooth a2dp (Audio)
Removed Useless LineageOS apps for more free RAM
WLAN: Update blobs from MediaTek ALPS N1
LCM: lgld070wx3_dsi_vdo: Fix flickering on resume, discharge ESD properly
Improved System Animations
Fix FWB SysUI / StatusBar, power leak
Fix FWB ArraySet crash
Fix FWB backup schedule system_server crash
Fix FWB batterySendBroadcast not synchronized issue
Fix FWB SystemUI FC due to Google Assistant
Fix FWB hwui: skip empty frame
Fix FWB system server crash caused by CME in usage stats
Fix FWB batterySendBroadcast not synchronized issue
Fix FWB PackageManagerService user CE data failed
Downloads
TWRP 3.1.1
TWRP_3.1.1_ME173X.zip | by superdragonpt for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
Build 20220911
https://www.androidfilehost.com/?fid=14871746926876822197
If you have the second hardware Screen revision by LG (check FAQ), flash this
kernel for the Build 20220911
https://www.androidfilehost.com/?fid=14871746926876822201
Older Builds
Build 20220808
https://www.androidfilehost.com/?fid=15664248565197201611If you have the second hardware Screen revision by LG (check FAQ), flash this
kernel for the Build 20220808
https://www.androidfilehost.com/?fid=15664248565197201606
Build 20220820
https://www.androidfilehost.com/?fid=15664248565197206369
If you have the second hardware Screen revision by LG (check FAQ), flash this
kernel for the Build 20220820
https://www.androidfilehost.com/?fid=15664248565197206372
The year is 2082. Society as we know it has collapsed and the world is but a nuclear wasteland. I haven't seen or talked to another human in weeks. Food is scarce and shelter is hard to come by... But life lingers on, even if just for a while longer, nature tries to heal itself with the little sunlight that manages to reach the ground through the dense clouds of soot. Last night I heard screams coming from the forest of dead pine trees, east of the abandoned glass factory. I'm not sure if they were human screams or the calls of an alternate, but I'm not eager to find out... I must hurry and head north, this place is no longer safe. To add insult to injury, I broke my only weapon while I was trying to cut down a few tree branches to light a fire... until I find materials to fix it, my possessions are my pet dog Alex, an half eaten can of beans and my ME173X running Android 69 with the latest security updates.
I'm waiting for the continuation and publication of this work in the form of a book.
Haha
This made my day
Cheers
superdragonpt said:
Disclaimer:
LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
How to Install:
1- BACKUP, BACKUP, BACKUP, All will be WIPED!
2 - Unlock bootloader instructions here
3 - Flash the new mandatory TWRP Recovery
4 - Move Rom & Gapps (optional) into device storage
5 - Full Wipes
6- Flash Rom & Gapps (gapps are OPTIONAL)
for GAPPS:
Choose Gapps Package "ARM" > "7.1" > "Pico" or "Nano" visit OpenGAPPS
Working:
It Boots
Storages
Wifi
Audio
Charging
Offline Charging
Video decoding / Playback (i.e.: Youtube) up to 720p
Sensor: magnetometer: akm8963
etc ....
NOT Working:
Bluetooth
GPS - GNSS
DRM Widevine : For Netflix, Amazon Prime, etc
Front Camera: mt9m114_mipi_raw
Front camera: GC0339_RAW
Rear Camera: a5142_mipi_raw
Sensors: accelerometer (autorotation)
You tell me
Special Thanks
OMNI Rom
LineageOS
DerTeufel1980 & fire855 ( my Team mates from M.A.D)
GPL Compliance:
GitHub - dragonpt/android_device_asus_me173x: ASUS ME173x device for LineageOS 12.1 & LineageOS 13
ASUS ME173x device for LineageOS 12.1 & LineageOS 13 - GitHub - dragonpt/android_device_asus_me173x: ASUS ME173x device for LineageOS 12.1 & LineageOS 13
github.com
GitHub - dragonpt/android_kernel_asus_me173x_new: ASUS ME173x [MT6589 - MT8125] Custom Kernel for LineageOS 12.1 / 13 / 14.1
ASUS ME173x [MT6589 - MT8125] Custom Kernel for LineageOS 12.1 / 13 / 14.1 - GitHub - dragonpt/android_kernel_asus_me173x_new: ASUS ME173x [MT6589 - MT8125] Custom Kernel for LineageOS 12.1 / 13 / ...
github.com
--> "asus_n" branchs
Click to expand...
Click to collapse
This is great! Thank you so much! I never expected so much support for this tablet...
Unfortunately, I really need GPS so I have to wait for another build...
Thank you very much for providing builds for this tablet! The 13 build really helped us a lot, as our 2-year-old could watch downloaded Peppa Pig episodes from Netflix during long vacation drives. Although I did had to download a previous major version of the Netflix APK to get it to work on Android 6.
As this version doesn't have Widevine DRM, Netflix won't work, I guess. The current version of Netflix from the app store needs at least Android 7, so it would be nice if this new build would also support that in the future. Is it possible to flash that somehow, or would you need to compile that during build-time? If so, it that planned, or are there any technical difficulties regarding that?
New Build is up
Build 20220820
Fix Advance reboot Menu (removed: reboot bootloader, isn't used)
ZRAM: Increase disk size to 768MB (recommended for 1GB Ram devices)
ZRAM: Boost performance: Actually enable LZ4 compression ( inline with current kernel)
ART: Update flags (Drop old flags, Drop uneeded dex2oat, force dex2oat not to use swap file ,etc)
Enable Pinner Service: pinning files into memory, boot oat, services dex (Improves system performance)
Removed LOW RAM flag:
- Device tree & kernel has been greatly optimized
- We finnaly have working ZRAM swap since los 13, working great
- There's no need to cripple the device out of useful features like MultiUser
Fix GPS
Fix DRM Widevine : For Netflix, Amazon Prime, etc
Fix Bluetooth (basic functions, pairing, file transfer)
- Bluetooth a2dp (Audio) is still broken (work in progress)
Fix Front Camera: mt9m114_mipi_raw / GC0339_RAW ( photos )
Some optimizations done at frameworks
cheers
Which Lineage version is the fastest?
bravur said:
Which Lineage version is the fastest?
Click to expand...
Click to collapse
Lineage !4 is on-pair with LOS13.
Lineage14 is currently the best if you ask me
New Build is up
Build 20220911
Fix Bluetooth a2dp (Audio)
Removed Useless LineageOS apps for more free RAM
WLAN: Update blobs from MediaTek ALPS N1
LCM: lgld070wx3_dsi_vdo: Fix flickering on resume, discharge ESD properly
Improved System Animations
Fix FWB SysUI / StatusBar, power leak
Fix FWB ArraySet crash
Fix FWB backup schedule system_server crash
Fix FWB batterySendBroadcast not synchronized issue
Fix FWB SystemUI FC due to Google Assistant
Fix FWB hwui: skip empty frame
Fix FWB system server crash caused by CME in usage stats
Fix FWB batterySendBroadcast not synchronized issue
Fix FWB PackageManagerService user CE data failed
First of all: thank you so much for giving us Andoid 7 for this old thing!
I just found out that Adaway won't install from F-Droid:
Error installing AdAway
Parsing apk file failed! Maybe minSdk of apk is lower than current Sdk? Look into logcat for more specific warnings of Android's PackageParser.
My observations of LG kernel up to 20220911
- battery charging VERY slow
- rotation sensor not working
- camera not working
- fast stock, slow with GAPPS
Maybe these are already on the todo list. Great to have A7 on this still usable tablet.
Cheers
pimisen said:
First of all: thank you so much for giving us Andoid 7 for this old thing!
I just found out that Adaway won't install from F-Droid:
Error installing AdAway
Parsing apk file failed! Maybe minSdk of apk is lower than current Sdk? Look into logcat for more specific warnings of Android's PackageParser.
Click to expand...
Click to collapse
Yup that's normal, im also an user of it
see here: https://github.com/AdAway/AdAway
"For devices older than Android 8 Oreo, use the version 4 of AdAway."
Get the last version here:
Releases · AdAway/AdAway
AdAway is a free and open source ad blocker for Android. - AdAway/AdAway
github.com
Version 4.3.6 > on Assets download " AdAway-4.3.6-200726.apk "
cheers
tweakradje said:
My observations of LG kernel up to 20220911
- battery charging VERY slow
- rotation sensor not working
- camera not working
- fast stock, slow with GAPPS
Maybe these are already on the todo list. Great to have A7 on this still usable tablet.
Cheers
Click to expand...
Click to collapse
hi
rotation sensor not working :
Yeah this is stated on the "not working" status " > Sensors: accelerometer (autorotation)"
I could never fixed this sensor on my kernel
battery charging VERY slow
The device can be very picky with chargers, with the stock charger it can charge up to 1.2 AMP @ 5v
fast stock, slow with GAPPS
Yeah GAPPS really have an huge impact on devices, it runs really smooth without GAPPS installed
Google sucks
camera not working
This is very nice report ( Thanks ) every single user that reported me the front camera isn't working has an device with the LG screen...
I just bought my third ASUS ME173X and got it yesterday ( since my kid broke the second one .. )
unfortunately all my tablets have the same nt35521 Screen ( really hopping to grab an LG variant ) for testing :/
cheers
How can I find out, what screen our tablet has?
Plz help! I can't root this rom, can you give a manual or something? I've tryed everything
sus ඞ
This is with the tablet plugged into the wall 24/7, sometimes it gets tired and stops charging
Don't mind the second pic, that's just it being used as a wireless monitor
bravur said:
How can I find out, what screen our tablet has?
Click to expand...
Click to collapse
You need to be running any of stock firmware with root rights.
There's many apps that facilitate the task like "deviceinfohw" , give the app root on settings, and on the main page it'll show you what LCM you device has.
Related
[ROM][UNOFFICIAL][8.1.0][treble][mido] LineageOS eXtended 15.1 [Closed for posts]
Thread closed as requested by Developer. Hopefully he opens one soon for everyone to use
Rom download https://androidfilehost.com/?w=files&flid=256804
Change Log - https://pastebin.com/raw/zEH3kdjK
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS eXtended is a free, community built, aftermarket firmware distribution of Android 8 (oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS eXtended is based on LineageOS and the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS eXtended does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS eXtended is available in the LineageOS eXtended Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Source Code:
https://github.com/LineageOS-eXtended
What's working :
Boots
RIL (Calls, SMS, Data)
Fingerprint
IR Blaster
Wi-Fi
Bluetooth
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
GPS
Volte
Known issues:
You Tell me
Instructions :
Download the latest build and GApps
Reboot to recovery
Flash the latest build and GApps
Reboot
Downloads :
Twrp for Treble builds (will work with normal builds too)
Custom magisk for treble enabled builds v16.4
Un-Official build [Nightlies]: https://androidfilehost.com/?w=files&flid=256804
MIUI Camera (For Slow Motion Video Capture)
GCam (UriKill Version) - For better HDR+ photo capture
Credits :
Alexey711 - Rom Compiler / Developer
XDA:DevDB Information
LineageOS 15.1 eXtended Redmi Note 4, ROM for the Xiaomi Redmi Note 4
Contributors
p3dboard, p3dboard, alexey71
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Miui 9 8.5.x or later
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: https://androidfileh
Stable Release Date: 2018-05-05
Created 2018-05-07
Last Updated 2018-05-07
First.
Screenshot please
Akibtech said:
First.
Screenshot please
Click to expand...
Click to collapse
Done, I just added a screen shot of the Settings, showing the Build number, and also of the Advanced Settings for adjusting the flash light.
There's a Youtube video https://www.youtube.com/watch?v=ZFx21b-oT1c that explains the extra features of this over LineageOS
(Moved from LineageOS thread)
Magisk Module - to change some defaults - values listed below. Just allows me to turn off Noise Cancellation for Video recording, use fluencepro instead of regular fluence Noise Cancellation and enable EIS by default.
Verified that the getprop command from a ADB shell returns the new values. Looks like the Module is working
Build.prop additions
Code:
# Add EIS and disable noise cancelation
persist.camera.eis.enable=1
#use fluencepro instead of fluence
ro.vendor.audio.sdk.fluencetype=fluencepro
#turn off noise cancellation for audio recordings
persist.vendor.audio.fluence.voicerec=false
Charging speed slow or Normal,
Because Many oreo rom charging very slow like 500mh - - 1200mh
bujing2 said:
Charging speed slow or Normal,
Because Many oreo rom charging very slow like 500mh - - 1200mh
Click to expand...
Click to collapse
Normal, I've never seet it jumps to 2k but it was playing at 1.8-1.9
Backups - Btw, if anyone wants to get SMS Backup, Call History Backup etc, going on Oreo, and you have Root Access (Magisk Root as an example), then you can get it going by opening up a Terminal Window (get Terminal App from Google play).
Then from the terminal run
Code:
su
bmgr run
bmgr backupnow --all
Once its completed, do a reboot, and you'll notice that in your Backup Status, your SMS's, Call Logs, Device Settings etc are now backed up. They should now backup once every 24 hours to your Google Drive, for use if you need to restore your device.
Last time I tried an Oreo Rom, it wasn't backing up, and at that time, I didn't know how to fix it. So I went back to MIUI for a while, so I had the auto backup (yeah I could have used an application for SMS backup, but I wanted the OS to do it )
Dolby Atmos & ViPER4Android work properly or not?
Downloading rom.
Is it based on abhishek? If not, is it enforcing selinux?
amnher said:
Is it based on abhishek? If not, is it enforcing selinux?
Click to expand...
Click to collapse
Not sure, but I guess that because its got LineageOS as its source with extra's on top, if abhishek has contributed to the LineageOS Gerrit than that might be true. Since its a Russian Developer, you would probably have to ask on the 4pda.ru forum to get an exact answer.
At the moment, seLinux is in permissive mode, so its not enforcing.
p3dboard said:
Not sure, but I guess that because its got LineageOS as its source with extra's on top, if abhishek has contributed to the LineageOS Gerrit than that might be true. Since its a Russian Developer, you would probably have to ask on the 4pda.ru forum to get an exact answer.
At the moment, seLinux is in permissive mode, so its not enforcing.
Click to expand...
Click to collapse
Hows the thermal problem on network?
amnher said:
Hows the thermal problem on network?
Click to expand...
Click to collapse
I have only just started using the rom, but haven't experienced any issues yet.
According to Alexey's change log of recent activities, on the 2/5/2018 he "Updated thermalconfig" - so maybe that's the fix for the issue?
05/05/2018
Corrected copying to MicroSD (for example, QuickPic application or stock gallery)
Added setting "Notification display time" (Settings - Applications and notifications - Notifications - Pop-up notifications)
Added "Notification transfer time" setting (Settings - Applications and notifications - Notifications - Pop-up notifications)
================================================== =====================================
05/04/2018
Fixed crash bluetooth after reboots
================================================== =====================================
05/03/2018
Corrected the disappearance of the fingerprint, if you place another Treble core
Added patch cameras, for 60fps and from the dark video. Thanks FaXiR http://4pda.ru/forum/index.php?s=&showtopic=833225&view=findpost&p=72042322
Removed the animation of Android R. Use Ethans, as for me, even more beautiful and there is no bug
WiFi 2.4GHz - now can connect at a speed of 150Mbps
Removed warning "Not compatible image of vendor ...."
Updated the kernel to 3.18.108
================================================== =====================================
05/02/2018
New Diode Driver
Updated thermalconfig
================================================== =====================================
05/01/2018
The firmware was transferred to TREBLE.
It is necessary to make a clean installation with System-Data wikis (Data format is desirable at once) - Vendor - Cache
p3dboard said:
I have only just started using the rom, but haven't experienced any issues yet.
According to Alexey's change log of recent activities, on the 2/5/2018 he "Updated thermalconfig" - so maybe that's the fix for the issue?
05/05/2018
Corrected copying to MicroSD (for example, QuickPic application or stock gallery)
Added setting "Notification display time" (Settings - Applications and notifications - Notifications - Pop-up notifications)
Added "Notification transfer time" setting (Settings - Applications and notifications - Notifications - Pop-up notifications)
================================================== =====================================
05/04/2018
Fixed crash bluetooth after reboots
================================================== =====================================
05/03/2018
Corrected the disappearance of the fingerprint, if you place another Treble core
Added patch cameras, for 60fps and from the dark video. Thanks FaXiR http://4pda.ru/forum/index.php?s=&showtopic=833225&view=findpost&p=72042322
Removed the animation of Android R. Use Ethans, as for me, even more beautiful and there is no bug
WiFi 2.4GHz - now can connect at a speed of 150Mbps
Removed warning "Not compatible image of vendor ...."
Updated the kernel to 3.18.108
================================================== =====================================
05/02/2018
New Diode Driver
Updated thermalconfig
================================================== =====================================
05/01/2018
The firmware was transferred to TREBLE.
It is necessary to make a clean installation with System-Data wikis (Data format is desirable at once) - Vendor - Cache
Click to expand...
Click to collapse
Ethans Animation really beautiful and fast
Where is the latest update link OP is little confusing.
G camera- recording 60fps without dark video, or not
bujing2 said:
G camera- recording 60fps without dark video, or not
Click to expand...
Click to collapse
You have to have sufficient light to get 60fps. Under dark / low light, the video gradually gets darker, as the Camera doesn't let in enough light to do that high a FPS except in bright conditions.
The only way to overcome that is to use Open Camera, and set it to Manual Exposure mode, then you can drop the FPS recording to say 15fps, and up the ISO to 1600, decreasing the shutter speed. Xiaomi Miui has something automatic that drops the FPS to increase the brightness with its Camera module.
But under bright / outdoor light, you can get close to 60fps. Today I got 58.5 fps in my test.
haravtar said:
Where is the latest update link OP is little confusing.
Click to expand...
Click to collapse
"instructions : download the latest build"
what is confusing...
haravtar said:
Where is the latest update link OP is little confusing.
Click to expand...
Click to collapse
I've updated the 1st post, hopefully its a bit clearer to you now - There's an AndroidFileHosts.com site that contains the rom builds.
Dolby Atmos & ViPER4Android working in this rom?
bujing2 said:
Dolby Atmos & ViPER4Android work properly or not?
Downloading rom
If you're flashing the combined zip of foly and viper I don't think viper will work but the dolby will.
---------- Post added at 08:47 AM ---------- Previous post was at 08:43 AM ----------
Does this rom has snap camera because we can record 120fps slow motion on it.
Click to expand...
Click to collapse
Disclaimer:
LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
How to Install:
1- BACKUP, BACKUP, BACKUP
2 - Unlock bootloader via fastboot
3 - Flash TWRP
4 - Move Rom & Gapps into internal storage
5 - Full Wipes
6- Flash Rom & Gapps (OPTIONAL)
WORKING:
-Mostly all
NOT Working:
-SE Linux is Permissive
- Video, Camcorder FIXED
- You tell me
GPL:
device:
https://github.com/dragonpt/android_device_lenovo_x103f
vendor:
https://github.com/dragonpt/proprietary_vendor_lenovo_x103f
kernel:
https://github.com/dragonpt/android_kernel_lenovo_msm8909
Thanks
@bbelos (all the initial bring up)
@GartimusPrime
LineageOS
XDA:DevDB Information
[ROM] [UNOFFICIAL] LineageOS 14.1 | Lenovo TB-X103F | 7.1.2, ROM for the Android General
Contributors
superdragonpt, bbelos, GartimusPrime
Source Code: https://github.com/dragonpt
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: Unlock BL, TWRP
Based On: LineageOS
Version Information
Status: Beta
Created 2018-12-14
Last Updated 2018-12-14
FAQ
Small FAQ:
Q: How can i Unlock Bootloader & flash TWRP?
A: Instructions for Unlocking Bootloader & TWRP can be found here
Q: How can i root this rom?
A: You need to flash LineageOS root addon via TWRP, download from here
Choose the Version 14.1 "addonsu-14.1-arm-signed.zip"
--> Then go to Settings > Developer Options > Choose your root access
Changelogs / Downloads
ChangeLogs:
Build: 20181213
First Release
build.id=NJH47F
version.release=7.1.2
Security_patch=2018-11-05
Device Specifics Changes:
Custom Kernel (upstream, fixs, etc)
Increase Volume Level
Fix (mostly) of speakers *pop* issues
Memory management improvements
Other stuff ...
https://www.androidfilehost.com/?fid=11410963190603873991
Build: 20181214
Fix Video Recording & media server issues
Update GPU Adreno blobs ( Better UI / UX )
Add missing OMX codecs
Update and fine tune mediacodec performance values
https://www.androidfilehost.com/?fid=11410963190603875272
Build: 20181215
Add FMRadio support
https://www.androidfilehost.com/?fid=11410963190603875738
Build: 20191124
Rom Updated to latest patch level 2019-11-05
Kernel: Disable CRC for a bit more performance
Device: Merged (most) of @deadman96385 clean up and changes, thanks for the cleaning
(left out offended commits that where leading to constant reboots, and that broke camera), check my github for more info
Recents optimizations
Actually Enable KSM
zram: decrease it's size (512 > 256mb) for a bit more performance
ART: some tuning
etc
https://www.androidfilehost.com/?fid=4349826312261644319
..
thanks very much, been looking for a new ROM for my daughters tablet for a while now
JaffaTB said:
thanks very much, been looking for a new ROM for my daughters tablet for a while now
Click to expand...
Click to collapse
yeah it's also my daughters tablet
will be doing another build soon, think i fixed some other issues that had been around forever
edit: just noticed Video recording is broken on all custom roms ... i never really recorded anything on this device
...either way.. seems fixed now, doing a clean build
cheers
That might have been why Snapchat didnt load up?
JaffaTB said:
That might have been why Snapchat didnt load up?
Click to expand...
Click to collapse
yup, very possible, was broken
is fixed now...
im just updating other stuff while i have the time
edit: Snapchat Opens and takes pics just fine
( new user here) i guess this is fine now?
Thanks, very appreciated
EDIT: snapchat would let me even log in before, kept getting the "snapchat keeps closing" error, so yeah looks fixed
JaffaTB said:
Thanks, very appreciated
EDIT: snapchat would let me even log in before, kept getting the "snapchat keeps closing" error, so yeah looks fixed
Click to expand...
Click to collapse
cool then, great :laugh:
New build is up
Build: 20181214
Fix Video Recording & media server issues
Update GPU Adreno blobs ( Better UI / UX )
Add missing OMX codecs
Update and fine tune mediacodec performance values
cheers
woohoo i can flash it for my daughter to play on in the morning, much appreciated
thanks very much
omg thx I've been searching for this ?
unfortunately i was looking for oreo, but it's not a problem anyway.
New build is up
Build: 20181215
Add FMRadio support
Cheers :laugh:
hi guys!
We need Gapps for this ROM ?
cause the Gapps i found for 7.1 gets the device too slow
without that it works perfect the rom even the cam/video recorder
radio all..
Indeed gapps has become heavier and heavier..
also, the device lacks ram (1gb Ram) & the emmc is also slow.
You could try:
Full wipes (backup your stuff first)
Flash rom + pico gapps arm 7.1
Clean cache + clean dalvik/art cache
Reboot
There's couple things Im around to take out all the juice I can out of this device
The latest GPU adreno blobs changes introduced , gave it an extra speed , and better UI overall
Cheers
Thankyou
Thanks for this ROM with volume fix, very speedy, the best the tablet
Has performed since new using latest opengapps 7.1 pico without problems
superdragonpt said:
Indeed gapps has become heavier and heavier..
also, the device lacks ram (1gb Ram) & the emmc is also slow.
You could try:
Full wipes (backup your stuff first)
Flash rom + pico gapps arm 7.1
Clean cache + clean dalvik/art cache
Reboot
There's couple things Im around to take out all the juice I can out of this device
The latest GPU adreno blobs changes introduced , gave it an extra speed , and better UI overall
Cheers
Click to expand...
Click to collapse
I followed ur way and now my tab work better than ever... ??
In fact I think for a device like ours its already the Top. ?
Thank u for your hard work ?
Ok next release will have some changes to what concerns to zram / memory allocation
The current ( also on stock ) 512 mb of swap is too much for this device, taking out way too much precious (real) ram , up to +100mb of real ram used by the 512 mb virtual swap...
Ram is the one resource that needs more attention on this device..
Cheers
superdragonpt said:
Ok next release will have some changes to what concerns to zram / memory allocation
The current ( also on stock ) 512 mb of swap is too much for this device, taking out way too much precious (real) ram , up to +100mb of real ram used by the 512 mb virtual swap...
Ram is the one resource that needs more attention on this device..
Cheers
Click to expand...
Click to collapse
Hello, I have ordered one of these tablets, in the meantime, I downloaded the latest qpst flashable firmware for it from a paid site i belong too, It includes the firehose for the device. Here it is in case you didn't have it already.
https://www.androidfilehost.com/?fid=11410963190603888971
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix Q
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
--> ROM is stable for daily-usage. <--
--> Only the N910C version is tested by me. <--
--> All Exynos models support full functionality (Sim , calls etc) <--
--> For Stable Camera (Photo/Video) Use this GoogleCamera or XDA Thanks @Kaper_20 and enable camera2Api <--
--> RR-Q DOES NOT support dualboot patcher! <--
--> The kernel is fully customizable using HKTweaks by corsicanu: Github <--
--> Personal Notes <--
Release notes :
RR builds are now in sync with latest lineage 04/30/2022 release, RR builds include FaceUnlock and system info overlay
I have also moved to releasing everything on sourceForge, and ive made Bootloader / modem update packages for those who need it, Head over to WiKi for instructions
20220421 Lineage Release notes :
Hey everyone! Glad to be back again for another release, This one has been in development for couple months now, and comes with massive upgrades and improvements, the most major is a full transition into Exynos7420 Oreo graphics drivers, which modernizes our device graphics stack significantly, and finally allows us to use proper OMX media codecs which solves many issues including the dreaded low quality playback! (You no longer need to flash FakeDeviceInfo)
Further more the new GPU driver significantly boosts performance in games and UI which is always a welcome (including fixing graphical glitches in games)
Other major fixes include full encryption support, Please refer to Updated TWRP to perform first time encryption setup, i must warn however, Encryption might interfere with future rom flashes, so only use it if you can keep your data backed up, as it will fully deny you access to it from TWRP.
This release also includes fixes for the random reboots, and Audio leakage, sadly this does not address the tiny microphone quality, so that remains an issue, Please refer to bugs for an uptodate bug list and instructions on how to easily report new issues
Big thanks to @ISoreo and @TrisTanster for a ton of help with testing
If you appreciate the effort behind this, don't hesitate to leave a thanks, provide constructive criticism and maybe consider donating some "totally not illegal stuff" over at my paypal
Submitting new issues/Requests
--> First read existing issues and the F.A.Q Below to ensure its not a duplicate/workaround <--
--> Head over to universal5433 for logging and issue reporting guide <--
--> provide as much info as possible and upload your logs on the forum <--
--> Footej and This GoogleCamera or Custom Opencamera XDA can record videos only <--
--> Kernel is Permissive <--
--> Microphone quality outside of calls is weak <--
--> Issues Page <--
Documentation
- Our project is also at SourceForge
TWRP
- My builds (3.5.9) WIth encryption support - XDA
-> Additional <-
ROOT Method
Magisk
- Simple follow Install instructions , Make sure to enable Magisk Hide to restore SafetyNet functionality
- i recommend Magisk V23 + Magisk hide for most usage
Google Apps
Open GApps
- Pick ARM > Android 10. No MicroG support currently
or
BiTGApps
- Pick ARM Package
Odin
- Odin3 v3.13.3
Heimdall
- Glass Echidna
Bootloader/Modem
- Latest Packages here
Sources
Resurrection Remix Source
Exynos5433 Source
Credits
@bonuzzz for his work in los-15.1 and exynos5433 Tablets and @dl12345 for his los-14.1 contributions
@Stricted for help throughout this project, and porting modern BSP for exynos5xxx
@Alastor89 for help with custom powerHAL and contributions from Galaxy S7
@ripee & @tripLr for contributions to maintain the trees and build server
@RaymanFX & @erickwill for their work in maintaining this device on CyanogenMod 13.0
@lineage project and all team members.
If you helped with this project and I forgot to add you, please PM or mention below.
Testers
@Fuadmoin for extensive N910S/L/K Testing
@ISoreo for extensive N910C Testing
ck on telegram for N910U testing
@Voytec83 @claude96 @Enginyaman @MrNova @podiwadda @muddii_yasser @Mohelsayedplus @SypeR_ @exalented @Seemanthinis @clewisit
t
-> RR Team <-
XDA Developers
Phhusson for Treble trees
LineageOs Team
Omni Team
And Of Course To All The Supporters, Donators And UsersXDA:DevDB Information
Resurrection Remix Q, ROM for the Samsung Galaxy Note 4
Contributors
ananjaser1211
Source Code: https://github.com/universal54335433/
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest Bootloader/Modem and TWRP
Based On: AOSP RR-Q
Version Information
Status: Stable
Stable Release Date: 2022-04-30
Created 2019-10-11
Last Updated 2022-05-01
Downloads and changelogs
Track changes on RefinedChannel : Telegram
Come hang with us on our chat : Telegram
My TWRP (3.5.9) For all Galaxy Note 4 Exynos Variants With Encryption : XDA
--> Downloads <--
Resurrection Remix Q v8.7.3 (04/30/2022 - STABLE)
N910C/H (treltexx) MD5 : 533d759dd2dd7dbe8e8768947b1ae699
N910S/L/K (trelteskt) MD5 833e67df2d3143ae65051d394be0bc3c
N915SLK (tbelteskt) MD5 : 92e6a946f5d06c9a3714ae152e8ab3d0
N916SLK (tre3calteskt) MD5 : 1d2a660d0a33d6891ce84eca71b68a9c
N910U (trhpltexx) MD5 : b3ca4cf4e424b746e302ada4221c8c00
SourceForge : Download
Old Builds (Only on AFH)
Resurrection Remix Q v8.7.0 (6/30/2021 - STABLE)
N910C/H (treltexx) : AFH | MD5 : 729b7000fc8e96d7fadfac49add853c9
N910S/L/K (trelteskt) : AFH | MD5 : 6b904260f77e67eb93d35221de6eef5b
N915SLK (tbelteskt) : AFH | MD5 : 7c96a1a7d695a10be271a95feac13355
N916SLK (tre3calteskt) : AFH | MD5 : f511947031c692ece1b1f360584c1ff7
N910U (trhpltexx) : AFH | MD5 : 27e2fe1346cd9ae450c1d55559a13b37
Google Drive mirror : Download
FakeDeviceInfo v2 : GDrive | AFH (Read more about it in F.A.Q)
->> Resurrection Remix Pie builds (10/19/2019) [LATEST]
N910C/H (treltexx) : AFH | MD5 : 47d28aab6df51628e6b09f6bbf243f67
N910S/L/K (trelteskt) : AFH | MD5 : 7814250d8a7efb6cfd81a81a7ef15b60
N915SLK (tbelteskt) : AFH | MD5 : 36878ec58ee4dedf85376f712d9c5f6f
N916SLK (tre3calteskt) : AFH | MD5 : e536e02efb45873a351fc5dec8d1f372
GoogleDrive mirror and test folder : Drive
->> Resurrection Remix Pie builds (11/10/2019) [LATEST]
N910C/H (treltexx) : AFH | MD5 : 42e7f3ddf8fd0a148bc8c55595791ca3
N910S/L/K (trelteskt) : AFH | MD5 : cfb14fb04ad7564bc184e795195d3d86
N915SLK (tbelteskt) : AFH | MD5 : fc58f1e8bdf981439aa5108d12b71384
N916SLK (tre3calteskt) : AFH | MD5 : 2c534cc6c9042673a987b04c051a68d2
GoogleDrive mirror and test folder : Drive
--> Changelog <--
Resurrection Remix Q v8.7.3 (04/30/2022 - STABLE)
- Include VR Support Pacakges
- Fix bootloop caused by encryption
- Resync latest RR Source
- Include FaceUnlock support
- Include System Information Overlay support
Resurrection Remix Q v8.7.3 (04/21/2022 - STABLE)
* This is a cumulative release of the past couple months
- Fix interactive governor performance issues
- build missing OMX hidl
- update media configs to fix some playback issues
- Switch to N935FXXS7CTJ2 OMX to fix video recording (screen record/footej)
- Increase min cpu clock to 700mhz
- restore stock little cpu boosting frequency
- Revert Agressive hotplug power saving mods
- Fix bluetooth audio suttering when screen is off
- Switch to Exynos7420 Oreo R22P0 GPU
- Update Gralloc to oreo buffer
- Patch camera to work with new gralloc
- Fix AdaptivePlayback low quality issues
- add 4K camera recording profile (ofc wont work)
- re-do media configs and bunch of other **** for oreo graphics
- update power_profiles to use proper power values
- Fix Power management in PowerProfile switcher (Balanced / Powersaving and performance now properly apply)
- Add custom audioroute which fixes various Audio issues (leakout in headphone jack, some echo, other audio route issues)
- Enable AOSP dynamic audio processing
- Reserve 128MB of internal storage for critical system operations (to avoid losing data when internal is full)
- Fix parse errors in media configs
- Fix MFC dec/enc permissions
- Improve RIL mobile data stability / latching onto network
- Remove unused things such as DRK, F2FS and deprecated camera configs
- Add Encryption support (Follow F.A.Q For how to get encrypted)
- Add 2017 August Vendor patch level
- Fix USB MIDI mode crash
- Remove unsupported audio sampling rates to avoid extra processing
- Fix WiFI Direct / P2P
- Significantly reduce Drain caused by broken P2P
- Add back GPS NTP server configs
- Fix-up and update XTRA configs for GPS
- Remove unsupported software decoders
- Revert broken audio processing in the lineage audio HAL
- Fix random reboots caused by invalid GNSS/GPS config
- Disable legacy hardware keystore
- Switch from proprietary keystore/tee to OSS for future support
- Various fixes to USB / MTP
- Add a fix for WiFi turning off after doze
- And a bunch of other minor things here and there in the device trees
Kernel :-
- Fully re-do USB upstream to fix weird issues with MTP
- Fix FBE Encryption
- Switch to OSS Mobicore driver
- Remove default Boeffla block list as it broke WiFi and other parts
- Update interactive governor
- Disable broken/unused governors
Old releases changelogs
Lineage 17.1 Update (6/30/2021 - STABLE)
- Sync GPS headers with exynos5420
- add patch for our old gps hal
- remove custom LMK stuff
- add ZRAM configs
- cleanup LMK
- add binary to detect device and set 3g/4g and proper codename/fingerprint
- support devices with engineering bootloader
- Remove problematic old commits from kernel
- re-do memfd and sdcardfs updates for Q
- backport zpool/zbud/zsmalloc and zRAM drivers
- Disable ZSWAP, and samsung swap (vnswap)
- Enable 1.5GB LZ4 ZRAM
- add proper LMK driver
- improve powerHAL frequency changing
- Downgrade sdfat driver to 2.0.6 to fix random reboots
- Add FreeForm multiwindow lineage patches
Lineage 17.1 N910U Update (3/08/2021 - STABLE)
- Fix simcard recognition
- Fix mobile data
- Fix voice call verbs and scenarios
- Now fully functional Sim calls, 3rd party calls, SMS and mobile data
Lineage 17.1 (3/04/2021 - STABLE)
- Fix modem startup on N910C/H/U that caused random reboots and sim issues overtime
- improve modem stability and fix a bug that caused the phone to panic if you unlock it fast after boot
- Enable Full screen gestures (See F.A.Q for how to enable)
- Replace custom fingerprint service with stock AOSP one
- Disable camera debugging and custom params that cause issues
- Rework media profiles to improve camera video quality in gcam
- Fix media performance issues to fix playback issues (Read F.A.Q for quality fix for instagram)
- Remove buggy AptXHD bluetooth codec and keep Aptx only
- Rework DRM service for full L1 support (No secure L1 playback yet)
- Disable absolute volume to fix bluetooth audio issues
- Add Wifi/Gps wakelock group to prevent issues on long uptimes
- More fixes to disable buggy P2P/WiFi Direct spam
- use low-end video profiles for smoother playback in some apps
- Add back and fix missing NFC
- Massive Audio rework to fix issues listed below :-
- Fix calls on earpiece, speaker, bluetooth and headphones for C/H/S/L/K
- Fix microphone issues on speaker calls
- Fix microphone issues on video calls
- Fix bluetooth call issues on all models
- Fix an issue that caused headphone volume to leak from speaker
- Fix an issue that caused earpiece to work when doing bluetooth calls
- Add custom workaround to fix no incall volume and other audio routing when you boot muted
Lineage 17.1 (2/17/2021)
- set default gpu clock to 600mhz to fix instability
- add FB notifier for power hal
- reduce mobicore logging
- fix HMP up/down tune to fix performance issues
- disable P2P Spam
- add support for lineage/twrp recoveries in the device tree
- add odex optimizations
- let aosp only compile the needed resources for our DPI
- add RAM pinner and pin SystemUI, graphics and runtime to RAM
- organize ramdisk into vendor
- add FastCharging hidl to turn on / off fast charging in settings
- add improved SQLITE overlays for app database optimization
- add custom max_volume warning for headphones
- remove guard that made flipflap (sview) not compile on korean variants
- build custom powerHAL
- add stock interactive profiles in powerHAL (balanced, performance and power saving)
- let the powerHAL manage CPU FREQ for all 3 modes and use stock powersaving freqs for max clocks
- overall powerHAL now has real management now and multiple tunable presets
- remove camera param debugging that clutter logs
- rebrand our custom hardware HALs into universal5433
- enable vibration intensity control in settings for some options
- update calling overlays and signal overlays
- organize app overlays in device tree
- add some props for HWC
- add mali gpu props
- fix-up core services startup in ramdisk
- let zram go across all 1.5GB of swap
- add AOSP RCS packages
- disable NFC debugging
- properly override AOSP APNS
- remove outdated configs and features from tree
- add fixes for random reboots
- update and improve audio hal / policy
- add basic support for audio cancelation (not fully working yet)
- re-organize stock aosp audio effect support
- fully reworked audio mixers
- redo mic quality / gains for all mics including headphone mic
- redo verbs and channels for audio recording
- reduce and remove clutter from mixers and update the used paths for speaker/earpiece and heaphones
- let camera use both left and right microphones when recording
- remove useless BT code and try to improve stability in media (untested in calls)
- commonize mixers_path for all variants
NOV 24 limited Test build changelog
- Fix OpenCL and Vulkan devices
- Improve UI performance and scrolling
- Disable loggy script to not fill /cache and cause issues. use adb for debugging
- Add fixes for bluetooth SCO (calls)
- Switch to better dalvik-heap config
- expose our opencl and vulkan devices to apps
- properly set max surface buffers to avoid lag over time
- Fix APN issues that broke LTE , 3G on some phones
- Fix Bluetooth stability issues / stuttering
- Increase proximity detection range to match stock
- overall graphics and UI improvements
Lineage 17.1 (11/23/2020
- Rebased trees and update to lineage 17.1 running android ten
- resolved an issue that broke GPS + RIL Connection and affected GNSS Locking
- Updated widevine and implemented clearkey to match modern devices with netflix playback support (requires magisk hide + reboot and some time to show up on the store)
- Updated kernel net driver significantly to resolve connectivity issues
- Remove broken/unsupported WiFi display that caused severe draining
- Fixed Fingerprint for android Q (read F.A.Q For more details)
- Allow direct booting from offline charging mode
- Added logging service to help with user debugging (When facing issues zip me /cache) read F.A.Q if you want to disable it
- Improve network scanning for RIL
- Improve graphics performance
- Early boot system for faster booting speeds
- Include official lineage power HAL which works better on our phones
- Apply fixes for media playback that required hacks previously
- and everything else Android ten brings!
Lineage 16.0 (11/01/2020).
ROM :-
- Updated to latest lineage sources with October 2020 Patch
- Switched to new BSP to compile most blobs (including video , display etc) big thanks @Stricted
- build and update OMX from BSP to resolve many codec issues
- Fix graphical glitches / issues during games (pink stuff)
- remove unused shims from the trees and do general cleanup
- update GPS shim and and improve its stability
- implement MultiHAL Sensors wrapper to resolve rotation and other sensor issues
- Disable broken CPUSETS
- update WiFi Configs and disable broken wifi features
- update TCP and other throughput configs
- Fix spammy P2P wifi logging
- bring back argosd service to fix slow WiFi / lag when downloading (tested upto 260mbps)
- Fixes to Wifi during Doze
- build open source bluetooth blobs with some call fixes
- update and adjust SWAP rates and switch to ZRAM
- disable nearby service by default which makes wifi unstable when bluetooth is active
- use second mic when using speaker calls to avoid echos
- other misc mixer and audio changes
- Disable GPU errors caused by unsupported screen fade effect
- Fix Front camera in stock/3rd party
- fixed video recording in footej camera and its quality to 1080p
- Fix headphone mic one more time
- Add workaround for muted incall audio
Kernel :-
- Remove broken wakelock controls
- implement devfreq boost driver by @Lunarixus
- update LMK driver to resolve issues with memory leaks
- properly kill GPU DVFS control from the driver
- adjust GPU interactive governor
- Fix an issue that made the GPU stuck at 100% utilization with min frequencies (this also resolved serious lag issues)
- bring back stock input booster settings (to maintain decent performance).
Lineage 16.0 (10/19/2019)
1- Fixed low quality video in instagram/twitter and so on by fixing AVC decoder (And encoder was improved)
2- Fixed offline charging animation
3- inline encryption with stock (untested)
4- Tons of fixes to WiFi, will remain working when screen is off, and more stable in games (and enabled background scan/batched scan)
5- Generally improved the quality of video playback / recording (to inline with stock)
6- LowMemoryKiller tweaks added that should help with the memory leak issue
7- Enabled burn-in protection
8- Added some fixes for mediaserver and made it more stable (It will crash less often now, but it will if you try hard enough)
9- Many changes to ramdisk to fix missing nodes (NFC, DVFS, GPS And sensors)
10- Adjust LowBattery warns (to inline with stock)
11- fix some errors in miracast so it works more often
12- Entire rework to the GPU to fix Graphical glitches, crashes and many more to heavy games (PUBG, CSR, COD etc)
13- Removed 100mhz GPU clock, set default min 266, max 600 as stock, removed 800mhz overclock option (Max is 730)
14- Sync with latest lineageOS source
15- And other misc changes to fix performance and battery in general
Lineage 16.0 (10/10/2019)
Cumulative changes from all the previous test versions
1- Re-work Audio fully with a new mixer_path based on stock tinyucm conf
2- Fix call echo in all scenarios (3rd party calls not tested)
3- restore stock gains (the ones we had were all over the place)
4- fix headphone mic in 3rdpaty apps and in calls
5- add missing wideband/narrowband scenarios
6- update the lineage audio hardware hal
7- restore mic level to stock without hurting voice recorders
8- Fix memory issues (with improved LowMemoryKiller and swap)
9- fix random shutdowns due to low memory after long useage
10- Set the minimum GPU frequency to 160
11- Set the GPU to be always online (due to lack of HWC, this fixes performance issues)
12- reduce the effect of touch booster to save battery
13- Disable swipe-up gestures
14- Massive liveDisplay fixing (ColorProfile , Displaymode (Night/day) , Color temperature , Outdoor mode And color calibration support)
15- Other performance improvments
16- Improvments to calls by reverting some broken changes
17- removed AudioFX (Qcom only)
18- added lineage vibration hal
19- removed custom gnss hal that wasnt needed
20- more fixes to GPS
21- slight changes to sensors
22- built healthd hal (still no offline charging)
23- enabled and fixed HWC
24- added a prop that helps with performance
25- Fixed NFC so it no longer ****s everything up when its turned off (and now can be turned on without also ****ing said things up)
26- other misc changes you can see in git
27- Fixed all HWC leaks (therefore you shouldnt have random reboots anymore)
28- Disabled always_on GPU for better battery saving
29- Animations and layers will have improved performance
30- removed a workaround that delayed boots
31- critical kernel changes to remove many workarounds we had by :
32- updated sdcardfs driver to remove legacy stuff
33- updated sdfat driver and enabling it for exFAT
34- updated EXT4 driver and using it for EXT2/3 instead of dedicated drivers for both
35- updated USB and ADB so we dont need legacy stuff anymore
36- updated and enabled F2FS Driver (support not tested)
37- patch a ion leak
38- updated wireless/wifi driver to remove the need for workarounds
39- Added back AudioFX as it works
40- DRM changes
41- default hotspot name
42- fixes to rotation sensor (it works fine with/without location enabled here, but if it as slow, enable location)
43- remove duplicated tether config
44- fix nfc config
45- Updated powerprofiles
46- slight changes to meda and camera set for the future
47- synced with latest lineage sources
TLDR : tons of fixes, better performance and having an actual usable phone.
Lineage 16.0 (9/21/2019)
1- Full hardware video playback (no lag even on 1080p60 playback)
2- LiveDisplay enabled (color mode changing) with more features to be added later
3- updated and enabled back ambient and aod (not fully tested yet)
4- added and updated APN and SPN configs
5- improvments to camera and include camera2 instead of snap
6- fix a mic bug that introduces artifacts in audio recording
7- OMX and media fully redone based on herolte
8- Rotation sensor should be more robust now
9- few changes to spen
10- Bluetooth range and issues fixed
11- improve RIL for SLK variants
12- Fix NFC issues on N916 variants
13- improvments to NFC on intl variants
14- set default color mode to cinema for vivid colors
15- Removed a binary that caused SLK variants to over-heat
16- latest lineageOS sources
17- compiled stable builds for N910SLK|N915SLK|N916SLK
18- overall the build is more responsive and stable due to MFC/OMX fixes
Lineage 16.0 build (9/16/2019)
1- Fixed Video playback for 3rd party apps
2- Youtube and other social media apps will no longer freeze randomly
3- fixed an issue that took a toll on performance
4- over all the rom will be noticeably smoother
Lineage 16.0 initial build (9/14/2019)
1- Updated and reworked the tree all together
2- A decent powerHAL modded to N4
3- Bluetooth APTX errors resolved
4- Fully fixed RIL (no workarounds needed)
5- Entire Kernel has been built from scratch
6- New binder, sdcardfs, and WiFi drivers
7- all the features of HeliosKernel built it and customizable
8- Updated brightness tables to conform with stock
9- removed ugly workarounds and hacks
10- Audio much more stable
11- stock APN , TCP configs and much more
12- Added more LED modes
13- Added AOD and ambient display support that kinda works
14- updated most libs and shims
15- built lineage trust and touch HALs
16- enabled gesture support
17- enabled smart pixels for ROMs that support it
18- And tons of other changes covered in the github source
F.A.Q And Notes
Q : How to use Encryption ?
A : First, head over to TWRP Thread And follow the notes for First time encryption setup (this involves formatting internal storage while using that twrp, This is mandatory as previous twrps did not create proper partition state for encryption), Then head over to settings > security > encryption > Encrypt Phone, the phone will reboot once or twice
Warning : Encryption will prevent TWRP from reading your internal storage at all, And encryption is very sensitive, any untested customization or mods might brick the ROM, and putting your data at risk, only use if required
UPDATE : You will bootloop if you did not set PIN/lockscreen in setup wizard before encrypting
Q : How to Tune for Performance or battery life ?
A : Latest release offers proper Power profiles which can be adjusted in Settings > Battery > EnergySaver and Performance. The slider will adjust MAX CPU frequency as follows,
Power saving Big: 1.4GHz Little: 1.0GHz
Balanced: Big: 1.7GHz Little: 1.3GHz
Performance: Big: 1.9GHz Little: 1.4GHz
Q: N910H wont detect SIM / network
A: This is due to it trying to force LTE, Go to settings > network > mobile networks And change preferred network type to 3G, then enable and disable Airplane Mode. Here is a Video by @mvrul2k20 to explain the procedure
Q : Korean variants (S/L/K) have tube / robotic audio in calls
A : this bug is unfixable for now as those models rely on stock audio hardware effects to fix this issue, but we cant use that and open source H/W does not support them
Q : How to enable android 10 gestures
A : First you need to enable navigation bar (this will disable touchkeys) then go to gesture settings and enable full screen gestures
Q : Recommended camera app to use ?
A : This Google Camera : Download or Footej2 from the play store
Q : When registering FP, i dont see progress or vibration
A : It is fine, keep enrolling your finger, and at the end it will show you pass. this seems to only happen with first enrollment
Q: Whenever I try flashing any lineage- build, I get the following error in TWRP: Updater process ended with ERROR: 7
A: Update your TWRP to 3.2.3 or higher available Here or newer
Q : Device is too warm
A : After first boot that is common, let the phone finish setting up and cool down
Q : How to get google apps ?
A : Go to Opengapps.org . Select ARM > 10 > [your choice] and flash opengapps*.zip after the ROM.zip
Q : How to get Root ?
A : Flash Magisk Root From Here (Recommended version 23.0 for better MagiskHide)
Q : How to tune the kernel ?
A : use HKTweaks app from @corsicanu : Github
reserved3
reserved4
Another great AOSP ROM from a great developer. Keep it up Anan! :highfive:
My boy is on fire!!! You nailed it again, congrats fam!!
Awesome ROM, thank you mate. Congrats
Thanks
Gửi từ SM-N910C của tôi bằng cách sử dụng Tapatalk
Ahhh Yess..
Finally arrive...
Thanks boss
Congrats and thanks for a new rom for our beloved note 4.
I have N916k korean variant i a gonna flash it and see how it runs.
Thumbs up bro???
well done bro, i used to use rr on many phones before, i'll try this too on my n4 right now... but i need an advice for the recommended pack of gapps for this RR.
Tamer Ali said:
well done bro, i used to use rr on many phones before, i'll try this too on my n4 right now... but i need an advice for the recommended pack of gapps for this RR.
Click to expand...
Click to collapse
I am using 20190917 with rr . 20191006 worked with lineage but not rr . That's why i tried 20190917 and it is working very well .
Gửi từ SM-N910C của tôi bằng cách sử dụng Tapatalk
ohh wow.... the best Custom OS coming to the Exynos variant... I greatly appreciate your efforts.
but I have a question: can this work perfectly on my N910S model?
Camera error
Camera dont work please help!
speedpervert said:
Camera dont work please help!
Click to expand...
Click to collapse
Did You read first post?
Few things, is s pen commands work (disabled screen notes on black display? galaxy wearable app?). I need it. Thanks for the info.
cant seem to install this ROM
Newbie here ; So i have a problem with this ROM , I was using your Nougat ROM and installed it without any problems ( 2nd rom ever!) but this one is giving me some trouble so if anyone can help that would be great.
So I rooted the phone ; installed TWRP ; flashed the bootloader ( actions in that order )
Now i selected 3 options when wiping with advanced wipe and did one factory wipe just to make sure im following all the tips in tutorial
Then i when i try to flash the ROM it says " image mounting complete " or something along those lines , then it 2 rows of message that I shoulda wrote down but I was so excited about this ROM and didn't (but can tomorrow ) nothing actually installs and everything takes like 3 seconds for that message to display and the only option is to reboot and I am warned with ( There is no OS installed do you still want to reboot and If i do i'm stuck on logo during booting )
Does anyone have any ideas what am I doing wrong?
Using n910c btw
EDIT :This is where im stuck it asks me this when i want to flash
boot img
select partition to flash image
system image
boot
recovery
Updating partition details...
...done
Full SELinux support is present
MTP Enabled
[ IMAGE FLASH STARTED ]
Image to flash : '/external_sd/RR-P-v7.0.2-20191010-treltexx-Unofficial/boot.img
Calculating restore details
[IMAGE FLASH COMPLETED ]-
Palir93 said:
Newbie here ; So i have a problem with this ROM , I was using your Nougat ROM and installed it without any problems ( 2nd rom ever!) but this one is giving me some trouble so if anyone can help that would be great.
So I rooted the phone ; installed TWRP ; flashed the bootloader ( actions in that order )
Now i selected 3 options when wiping with advanced wipe and did one factory wipe just to make sure im following all the tips in tutorial
Then i when i try to flash the ROM it says " image mounting complete " or something along those lines , then it 2 rows of message that I shoulda wrote down but I was so excited about this ROM and didn't (but can tomorrow ) nothing actually installs and everything takes like 3 seconds for that message to display and the only option is to reboot and I am warned with ( There is no OS installed do you still want to reboot and If i do i'm stuck on logo during booting )
Does anyone have any ideas what am I doing wrong?
Using n910c btw
EDIT :This is where im stuck it asks me this when i want to flash
boot img
select partition to flash image
system image
boot
recovery
Updating partition details...
...done
Full SELinux support is present
MTP Enabled
[ IMAGE FLASH STARTED ]
Image to flash : '/external_sd/RR-P-v7.0.2-20191010-treltexx-Unofficial/boot.img
Calculating restore details
[IMAGE FLASH COMPLETED ]-
Click to expand...
Click to collapse
sorry but, why are you flashing an IMG ?? the rom is a zip file, install it like you would any other zip file. and NOT an img
Sir thnx for the great rom.. I just have one problem i cant connect to 5g wifi network. It just says obtaining but not connecting
Disclaimer:
LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
How to Install:
1- BACKUP, BACKUP, BACKUP, All will be WIPED!
2 - Unlock bootloader instructions here
3 - Flash New Recovery (with newer kernel for Lollipop)
4 - Move Rom & Gapps into external (or internal) storage
5 - Full Wipes ( recommended, wipe All -Preflash)
6- Flash Rom & Gapps (gapps are OPTIONAL)
After ROM is finished flashing, there will be a prompt for
To fix "SU"
--> press "NO", otherwise it'll mess some permissions and wifi (among other things) won't work properly
for GAPPS:
Choose Gapps Package "ARM" > "5.1" > "Pico" or "Nano" visit OpenGAPPS
Working:
Boots
Wifi
Bluetooth
GPS
Audio ( all: Speaker and headphones)
Charging and Offline Charging
Mediaserver
SW enc/dec
Both storages working
HW Composer
etc ....
NOT Working:
No camera support (broken in my kernel, and likely broken in Lineage as well)
Auto rotation (accelerometer broken in my kernel)
You tell me
Thanks
OMNI Rom and their work on MT6589 (special thanks to: xplodwild & Dr-Shadow)
chrmhoffmann
kashifmin & blackrebel75
DerTeufel1980 & fire855 ( my Team mates from M.A.D) some of our "madOS" optimizations where used here / other stuff
BSydz for Carliv-CWM Recovery ( im too lazy to build one)
recovery has been repacked with my kernel for lollipop flash)
XDA:DevDB Information
[ROM] [UNOFFICIAL] LineageOS 12.1 |ASUS Memo Pad HD 7 (me173x) [MT8125], ROM for the Android General
Contributors
superdragonpt
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlock Bootloader
Based On: CyanogenMod/LineageOS
Version Information
Status: Beta
Created 2019-10-28
Last Updated 2020-04-27
FAQ & Changelogs / Downloads
Small FAQ:
Q: How can i Unlock the Bootloader?
A: Instructions for Unlocking the Bootloader can be found here
Q: After locking the screen, the screen is all black, and I'm forced to reboot, how can I fix this?
A: If you have this issue, then your device uses an different hardware LCM
( the lgld070wx3_dsi_vdo ), please use the second kernel.zip for this variant, it'll be added an second kernel . zip for people with this variant, on the download section with the ROM releases
how to flash this ?
After flashing the ROM, flash the second kernel afterwards
This kernel containing the LCM for this HW variant will be always WIP, as both my units have the first LCM HW variant ( nt35521_dsi_vdo).
So my testing will be always based on other people logs
Q: Where are the Developer Options?
A: Go to Settings>About Phone, and tap 7 times on the Build Number
Q: How can i root this rom?
A: Rom is already pre-rooted with Lineage's su
--> Enable Developer Options by tapping 7 times on Build Number
then in Developer Options > Check the "root access" option
Q: Can i root with another method ?
A: Sure, you can also use latest SuperSU (v 2.82)
Magisk root, haves some issues with Legacy MediaTek Devices, use/ test at your own risk
Q: I can't flash this Rom on recovery, why?
A: You need to update your recovery in order to flash this Lollipop Builds
Q: How can i flash the new recovery?
A: If you already have an custom recovery installed:
Download the new recovery zip
flash the new recovery
reboot to recovery again
If you don't have any custom recovery installed:
- You can extract the "recovery.img" from the .zip
- Open an terminal
- Boot to fastboot mode, and type:
Code:
fastboot flash recovery recovery.img
then reboot:
Code:
fastboot reboot
Q: I Love your work, how can i thank you?
A: You can press the "Thanks" button, and if you wish, you can pay me a beer
Changelogs:
Build: 20191028
First Release
build.id=LMY49J
version.release=5.1.1
Security_patch=2016-11-01
Build: 20191103
GPU PowerVR SGX 544: Update driver & DDK update from 2204701 > 2564405
LCM: nt35521_dsi_vdo: Improved Gamma / color
cpufreq & HotPlug Mechanism Backport from MTK KitKat
Reverted ASMP
Charger: BQ24156: Corrections: in some scenarios (thermal) current was too low to init charging
LCM: nt35521_dsi_vdo: More reverse engineering done ( greatly improved resume, suspend, etc)
Other Kernel optimizations, check github for full list
Fixed and enabled HWC (hardware composer)
ART: improvements for low ram devices
Many low ram optimizations
Frameworks: tune for Faster app switching
Frameworks: tune System Animations for low ram
Frameworks: tune Scrolling, velocitytracker, other system animations
Build: 20200413
Kernel:
New Kernel, based on latest 6589 platform baseline
Upstream to Linux 3.4.11
Many (many...) issues fixed, being the main ones:
Linaro 4.9.1
Update ExFat to 1.2.9
Many GPIOS issues fixed (mediatek power)
Update BFQ to v7r8
mediatek board: MSDC fixs
Removed MediaTek LMK (low memory killer) implementation, switch to android's and upstream lowmemorykiller
selinux and binder updates
Removed some MediaTek SCSI mess implementation (very bad)
Increase Swappiness
Video: Fix LCD Blinking & ESD discharge
mediatek: Update connectivity, Sync with MediaTek LP 3.10 kernel
Backported from mediatek kernel 3.10.x (lp1 & MM) several Kernel security vulnerabilies & updates
Battery: New battery percentage tables
charger: Fix several issues
Power OFF charging: fix issues
combo chip improvements
LCM improvements
etc
Device:
Fix some ramdisk permissions
Switch to tablet optimized recents interface
Fix screen flipping before screen goes off
Disable config_wifi_background_scan_support
Switch to shim lib
SW OMX improvements
ART optimizations
Remove useless packages ( reclaim more RAM)
etc
Frameworks, others:
CM -> Lineage, last steps rebranding
Fix some eGL crashs
remove cmstats to stop tracking...
Improve GPS assist
SW OMX improvements
Fix two NullPointerExceptions
Backport security vulnerability on SQL
Fix fix memory leaks
Track down and fixed an issue where audio would stop playing ( Facebook videos)
Fix WVM, widevine DRM
Add Chromium Browser to replace the old and insecure AOSP Browser
Disable HWC (we don't really need it for now)
Fix a missing symbol from ICU
Backport security vulnerabilies on fw_opt_net wifi & external wpa supplicant
Fix an issue with Bluetooth share
other stuff...
Build: 20200516
Kernel:
Upstream to Linux 3.4.34
LCM: nt35521_dsi_vdo: Be compatible with the newer Hynix nand
mmc: Hynix HAG2E: Work around sdio resume
Power: Turn off VMC 3V For power saving
WiFi: Adjust regs for better WiFi Power flow (Decreases WiFi Power consuption)
mediatek: remove MTK SCHED
WiFi: Final corrections (Fully working now)
Sound corrections
video: Improve on-resume responsiveness
LCM: lgld070wx3_dsi_vdo Is fully working now
Other small issues & clean up fixs
Frameworks:
native: libUi : Add compatibility with MediaTek MT6589
native: surfaceflinger: Add compatibility with MediaTek MT6589
EGL: Add further compatibility with MediaTek MT6589
av: libstagefright: WIP MT6589 Fixs
Better integration of MTK MT6589 hwcomposer (forward port code from MediaTek MT6589 KK BSP)
Better integration of MTK MT6589 gralloc (forward port code from MediaTek MT6589 KK BSP)
Downloads:
Recovery:
https://www.androidfilehost.com/?fid=4349826312261609065
Download Builds:
20191028
https://www.androidfilehost.com/?fid=4349826312261609061
20191103
https://www.androidfilehost.com/?fid=4349826312261615659
20200413
https://www.androidfilehost.com/?fid=4349826312261770467
Kernel for users with second LCM HW variant
(check F.A.Q. above for more info )
https://androidfilehost.com/?fid=4349826312261777404
20200516
https://www.androidfilehost.com/?fid=4349826312261811603
Kernel build 20200516 (for second LCM HW variant)
(check F.A.Q. above for more info )
https://www.androidfilehost.com/?fid=4349826312261811606
..
Info and GPL Compliance
Some small intro:
Asus never complied with GPL (despite the efforts of many people, myself included)
Asus always denied to provide the *real kernel source code, instead they provided an generic kernel that is useless, as it doesn't contained ANY driver used by this device
My Kernel, was made from *scratch, and this took some years to achieve the current state, yet, it's not completed nor perfect:
Broken:
- No cameras support ( the image sensors are highly customized by Asus), this is broken at kernel level, let alone on ROM...
- Sensors ( accelerometer & magnetometer are still kinda broken, they are registered, but don't work most of the times)
half Broken:
- WiFi : WiFi driver has also been highly customized, right now WiFi is working just fine, but with just one small bug
--> if you disconnect WiFi, and then afterwards try to connect it'll hang ( you need to reboot) FIXED since Build 20200516
- Reported battery percentage, isn't very precise , and may have sudden drops
Working:
LCM nt35521_dsi_vdo
LCM lgld070wx3_dsi_vdo
(second HW revision), support available in an seperate kernel .zip
( check F.A.Q above)
Touch (GT927)
Charging (BQ24156)
Storages
All the rest
GPL:
Kernel:
https://github.com/dragonpt/android_kernel_asus_me173x
New Kernel starting from 20200413 builds
https://github.com/dragonpt/android_kernel_asus_me173x_new
Device:
https://github.com/dragonpt/android_device_asus_me173x
Oh god. This looks amazing!
Dang that I sold mine a few years ago...
Good work!
Thanks for your efforts to make this working. Great job!
Still have one lying around here so definetly gonna try this.
If remaining problems with CM12.x are solved will there be like CM14 in the future too?
Thanks.
tweakradje said:
Thanks for your efforts to make this working. Great job!
Still have one lying around here so definetly gonna try this.
If remaining problems with CM12.x are solved will there be like CM14 in the future too?
Thanks.
Click to expand...
Click to collapse
Funny you asked this
There's some early work already towards los 14
( Nougat)
Let's see
Thanks for work!
Yesterday I install this version on my tablet. Good side: tablet booted But after screen lock, I only can see screen backlight and sounds when I tap to a black screen, reboot helped solve this problem, but after screen lock, this problem repeated. And I can't turn on wifi
taller_stk said:
Thanks for work!
Yesterday I install this version on my tablet. Good side: tablet booted But after screen lock, I only can see screen backlight and sounds when I tap to a black screen, reboot helped solve this problem, but after screen lock, this problem repeated. And I can't turn on wifi
Click to expand...
Click to collapse
Interesting...
As I mentioned previously, this tablet came with two versions of LCM, I own two and both have the same :
"nt35521_dsi_vdo"
I can only assume your have the other LCM variant from LG "lgld070wx3_dsi_vdo"
As you can see here in kernel project configuration:
https://github.com/dragonpt/android...sus/mediatek/config/asus/ProjectConfig.mk#L49
Thanks for your provided feedback, you gave me an clue in how to possibly fix this second LCM variant, I'll look into it.
Meanwhile if you please: before your tablet went into locking, where the colors alright, any noticeable artifacts in the screen?
Thanks
Yep, I see some artifacts on the screen: screen blink and white line on the bottom of the screen
JFYI, I have RUS tablet version
superdragonpt said:
Interesting...
As I mentioned previously, this tablet came with two versions of LCM, I own two and both have the same :
"nt35521_dsi_vdo"
I can only assume your have the other LCM variant from LG "lgld070wx3_dsi_vdo"
Click to expand...
Click to collapse
Hi, is there a method from stock to determine that LCM version?
Trubbs said:
Hi, is there a method from stock to determine that LCM version?
Click to expand...
Click to collapse
yes
If you have stock rom (or any of my AOSP roms)
you need root, install deviceinfohw app
https://play.google.com/store/apps/details?id=ru.andr7e.deviceinfohw&hl=en_US
then on this app go to settings, allow root permissions
reload the app, and it'll show the LCM driver
edit check picture:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What are people using for root on this? I've tried flashing Magisk (v20) but it fails in an unsupported image format when extracting the boot image.
dt_matthews said:
What are people using for root on this? I've tried flashing Magisk (v20) but it fails in an unsupported image format when extracting the boot image.
Click to expand...
Click to collapse
Lineage have their own su, you can activate it on developer settings
- you can also flash latest SuperSu 2.82 (tested working)
-Magisk haves some issues with some Mediatek devices (some other mtk devices my team supports haves this issue as well)
If I recall ... only until version 14 or 16 works
( I'll confirm this later)
Cheers
I have graphic artifacts after waking up the device. in addition, tablet charging does not work. after uploading the re-stock ROM loading works
Wysłane z mojego motorola one vision przy użyciu Tapatalka
con01 said:
I have graphic artifacts after waking up the device. in addition, tablet charging does not work. after uploading the re-stock ROM loading works
Wysłane z mojego motorola one vision przy użyciu Tapatalka
Click to expand...
Click to collapse
Really Weird charging is not working...
Working fine for me, (16 GB variant WW) also a user with the 16GB variant RU also confirmed this to be working
About after waking up the device I have this sometimes as well, its ESD discharge from the LCM, not something to worry about, the LCM is not perfect, needs some more tuning .
Could you tell me what LCM does your variant uses?
You just need to install an app and check .
Seems to me , there's some more model variants
( with slightly different hardware that I was aware )
Cheers
superdragonpt said:
Lineage have their own su, you can activate it on developer settings
- you can also flash latest SuperSu 2.82 (tested working)
-Magisk haves some issues with some Mediatek devices (some other mtk devices my team supports haves this issue as well)
If I recall ... only until version 14 or 16 works
( I'll confirm this later)
Cheers
Click to expand...
Click to collapse
Ah, great, ok, I'll activate the provided su in settings.
WOW!
Thank you, mate, for a great job!
It was pity to realise the good device is gonna die on JB.
Looking forward for a reliable ROM.
@superdragonpt sorry for became a bit OT,
Can I use some commits from your tree for another mt6589 device that I working on it?
Thanks!
Rortiz2 said:
@superdragonpt sorry for became a bit OT,
Can I use some commits from your tree for another mt6589 device that I working on it?
Thanks!
Click to expand...
Click to collapse
Of course
Cheers
Installed rom without issue, good instructions :good:
I also get problems waking device, in fact always have to reboot. Main reason to install was to allow netflix downloads however it appears that is a deeper issue than just android version, possibly architecture. But it does allow install of kodi so positive there. Main use is entertainment device in my car during lunch break.
Also have weird keyboard issues, double key entry type android get androoid and random other key presses miles away from where my fat fingers are pressing.
Great work so far otherwise, thanks
Let me know if I can assist dev with any test or info.
Cheers
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Whats works:
Booting
Audio
Graphics
RIL (calls, sms, mobile data)
Wi-Fi, Wi-Fi Direct
Bluetooth
GPS, GLONASS
FM Radio
Sensors
Camera
Face Unlock
Video recording
Screen cast
Offline charging
SELinux (enforcing)
SafetyNet (with hidden Magisk or without root)
Tell me, if something does not work.
FAQ
Q: Does this ROM supports double tap to wake? A: No. And will not in future.
Q: Cannot add widgets to home screen. Widgets is not supported? A: Widgets is not supported in builtin launcher. Download any third-party home app (like Nova Launcher) and enjoy!
Q: Why split screen mode is not available? How to enable? A: Due to Android Go limitations, all forms of multiwindowing is not available on this edition of Android.
Q: When my app "foo" asks permission to access to notifications or to run on top of other apps, I see "This feature is disabled"... A: This is limitations of Android Go to save memory.
Q: Cannot use my sdcard as primary storage! A: This feature is unstable and excluded from ROM.
Q: Flashed this ROM but phone don't booting! A1: Boot to recovery and wipe /data, then reboot. A2: If your /data is formatted to f2fs, format it to ext4 and boot your phone.
Q: What is "Gapps for Android Go"? A: This is Gapps set, extracted as-is from Nokia 1 Plus Android 11 Go firmware and packaged for Lenovo A6000. Nothing removed, just fixed some permissions and added Google Camera Go.
Installation
Flash latest recovery (if needed), based on TWRP >= 3.2
Reboot to recovery
Wipe /cache and /data. If your /data is formatted in f2fs, format it in ext4, otherwise OS will not boot.
Flash the rom
Flash Gapps (Gapps for Android Go or OpenGapps ARM/Android 11/pico or nano)
Flash Magisk (also if needed)
Reboot to ROM
Spoiler: Latest changes
Build 05.09:
August security patch level
ROM is signed with release-keys
Build variant now is user, not userdebug
Updates from Lineage OS team
Clipboard access notification
USB fast charging toggler
Some OEM Android Go tweaks (from Nokia, ZTE)
New default wallpaper
Stricten background limits: 2 apps for 1/8 and 4 for 2/16
Recents is limited to 4 apps
Reworked WiFi and Tethering configuration overlays
Added overlays for Gboard, MessagesGo
Disabled caching in Trebuchet (launcher is fast enough to allow us to save some amount of memory)
zRam switched to Zstandart compression algorithm
Implemented clean page protection to reduce lags under memory pressure
Disabled rounded corners in UI
SEPolicy fixes
Misc...
NOTE: Strongly not recommended "dirty" updating. If you want to do this anyway, flash migration script before flashing the ROM!
Migration script: https://drive.google.com/file/d/15hB63RkyRpCljho9jyFTHoYWvCl4cDWe/view?usp=drivesdk
Download ROM: https://drive.google.com/file/d/1vUHuS18vDowwCSIWl8Dl4xxRHR4EHir0/view?usp=drivesdk
Gapps: Gapps for Android Go(updated!) or OpenGapps (ARM, pico or nano)
Credits to:
twain55
Moto-M8916 guys
Teo Flo
dev_harsh1998
SkepticOne
Nitrogradient
IvanHephaestus
Our Telegram discussion group: Lenovo A6000/Plus Community Discussions
Contributors
acroreiser
dev_harsh1998
Source code
Device tree: https://github.com/acroreiser/android_device_lenovo_a6000
Kernel tree: https://github.com/acroreiser/android_kernel_lenovo_a6000
Vendor tree: https://github.com/acroreiser/android_vendor_lenovo_a6000
ROM OS Version: Android 11 Go
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Hex Firmware Patch, TWRP >= 3.2
Based On: LineageOS
Version Information
Status: Stable
Created 2021-05-12
Last Updated 2021-09-13
Finally android 11 for a6000 thank you
Wow, I thought the previous version (17.1) is the last one for this device.
I am really happy I was wrong!
Thank you so much for your work acroreiser and dev_harsh1998. Also thanks to everyone who is credited!
First of all thanks to all the Devs who have kept this device still alive by providing it with those up to date roms...
Well I am using this rom for last 3 days i must say its super smooth apps are opening blazing fast, all major functions are working properly and it can be used as a daily driver for sure...
Now I encounter one bug so far its in Camera Go app the thing is when i change the storage location to SD card and start video recording than it suddenly freezes after some seconds by saying "Something went wrong " than i need to restart the app for using it again, by the way when i change the storage location back to internal than video recording is working fine so its really not bothering me that much....
There is one more thing well its not a bug its just my observation with this rom that during charging its heat up more than expected even when its charging at 90% to 100% slot which i never experience with any other roms.
All in all still its worth a shot everything's working fine, thanks to the devs again...
[email protected] said:
First of all thanks to all the Devs who have kept this device still alive by providing it with those up to date roms...
Well I am using this rom for last 3 days i must say its super smooth apps are opening blazing fast, all major functions are working properly and it can be used as a daily driver for sure...
Now I encounter one bug so far its in Camera Go app the thing is when i change the storage location to SD card and start video recording than it suddenly freezes after some seconds by saying "Something went wrong " than i need to restart the app for using it again, by the way when i change the storage location back to internal than video recording is working fine so its really not bothering me that much....
There is one more thing well its not a bug its just my observation with this rom that during charging its heat up more than expected even when its charging at 90% to 100% slot which i never experience with any other roms.
All in all still its worth a shot everything's working fine, thanks to the devs again...
Click to expand...
Click to collapse
The problem is in the application itself. in the firmware the application is of the old version and there should be no problems with the video. But it is automatically updated to the latest version in the Playmarket and there is a problem. Remove the app update and it will work as expected.
Teo Flo said:
The problem is in the application itself. in the firmware the application is of the old version and there should be no problems with the video. But it is automatically updated to the latest version in the Playmarket and there is a problem. Remove the app update and it will work as expected.
Click to expand...
Click to collapse
Thanks for the info, I will try that for sure...
Hey devs,
Thanks for this brand new ROM! I use this phone as a daily driver and wanted your advice on this version or the 17.1 version. Which one is likely to be maintained in the future? I understand that 17.1 is stable but will it still get more updates or security patches or should I go ahead with this 18.1 version, please?
Thank you for your help and also for keeping this phone alive in 2021.
Cheers,
S
santoshwins said:
Which one is likely to be maintained in the future?
Click to expand...
Click to collapse
Currently Lineage OS 18.1 is maintained.
Both 17.1 and 18.1 is based on my Go device tree (forked from @dev_harsh1998 lineage-16.0 tree) but lineage-17.1 branch is not maintained since february 2021.
I don't know is @twain55 can maintain 17.1 builds for a long time (better ask him).
Lineage OS 18.1 is pretty stable for daily usage by user reports and my experience with a6010 (I don't have a6000 and primarily maintaining a6010 with merging stable changes to a6000 tree).
Can a dirty flash be done from 17.1 ?
Zack316 said:
Can a dirty flash be done from 17.1 ?
Click to expand...
Click to collapse
Of course no.
New build is up!
Changes:
June security patch level
Updates from Lineage OS team
Memory and performance optimizations for 1/8 devices
Forward-ported qcom memory optimizations (frameworks/base)
Updated Binder driver (kernel)
Implemented automatic background apps memory reclaim (kernel)
Restored Qualcomm VP8 and HEVC codecs
Updated Bluetooth HAL from Nokia 1.3
Updated some media blobs
Some kernel tweaks from other low ram devices (Redmi Go, Nokia 1.3)
Workaround for broken video recording in recent versions of Google Camera Go
Recent apps screen is limited to 5 apps to save memory
Killed multiuser support - Go devices should not have this. Also this feature is pointless in our ancient phones...
Download: https://drive.google.com/file/d/1IqRTbY9CYH9Je3bmqaavjQHnn-763bx5/view?usp=drivesdk
Wow, thank you so much for the android 11 version. It is minimalistic and smooth. Loved the rom. Also thank you devs for keeping this device alive.
Needs Undervolting.
Even the standby drain is around 600ma.
Also I've bought a new battery for this, even that cannot survive more than an hour of SOT.
Please optimised the kernel or just undervolt it a bit.
Also only one of the back speaker is working,
Hi , Dear
Thank you for your your creativity
For Lenovo A6000 1G Ram & 8Gb Rom
Which version is the best 17.1 or 18.1 ??
Can i flash Twrp 3.2 on kitkat or must to be on Lolipop ??
Cheers ^_^
so this rom i cannot use my sd card right? that's super bad for me!
-ARiCK- said:
so this rom i cannot use my sd card right? that's super bad for me!
Click to expand...
Click to collapse
There is no problem with the firmware for using the SD card
I keep getting the "This build is signed with public key" error notification every time at startup.
New build us up!
Quick changelog:
August security patch level
ROM is signed with release-keys
Build variant now is user, not userdebug
Updates from Lineage OS team
Clipboard access notification
USB fast charging toggler
Some OEM Android Go tweaks (from Nokia, ZTE)
New default wallpaper
Stricten background limits: 2 apps for 1/8 and 4 for 2/16
Recents is limited to 4 apps
Reworked WiFi and Tethering configuration overlays
Added overlays for Gboard, MessagesGo
Disabled caching in Trebuchet (launcher is fast enough to allow us to save some amount of memory)
zRam switched to Zstandart compression algorithm
Implemented clean page protection to reduce lags under memory pressure
Disabled rounded corners in UI
SEPolicy fixes
Misc...
Read notes in OP before installing!
Installed the latest build. Thank you. Great work . Everything is working very good. Battery life is extremely good. Got 7-8 hours full HD youtube playback on 4g. Go version is working very smoothly ( previously was using android 5.0 stock )
...
I also have another device 10or.E which has similar SoC SD430. Can you tell me step by step instructions. Kernel source is available. ( I read about building but did not clearly understand various terms like vendor etc... Tried to create initial .mk files for the board but errors at luch command itself )