Please i need the full firmware of JCAC10003-OC2-20412011210
I need to patch the img with magisk and to reinstall it into the head unit
Please where i can find all the firmwares files of thoose head units
Request it from seller / manufacturer, if you can't find it in Internet at your own.
xXx yYy said:
Request it from seller / manufacturer, if you can't find it in Internet at your own.
Click to expand...
Click to collapse
Pm me bro, i wanna ask you some questions if you dont mind
you can readback ROM from SP Flash Tool on windows (complicated) or mtkclient on linux (easier). I am lazy but have written already here and there many times. some of the links might help.
https://forum.xda-developers.com/t/4541917/post-88021497
(no support via pm, keep it in the threads)
aIecxs said:
you can readback ROM from SP Flash Tool on windows (complicated) or mtkclient on linux (easier). I am lazy but have written already here and there many times. some of the links might help.
https://forum.xda-developers.com/t/4541917/post-88021497
(no support via pm, keep it in the threads)
Click to expand...
Click to collapse
The problem how to make the head unit reboot into recovery mode, or into download mod, and how to connect it via computer due it has no port or anything..
no recovery mode or download mode needed. preloader mode works without power (it is powered over usb)
aIecxs said:
no recovery mode or download mode needed. preloader mode works without power (it is powered over usb)
Click to expand...
Click to collapse
And from where i will get this preloader ?
preloader mode is yet another mode, like boot mode, recovery mode, fastboot mode, ...
for Windows you need to install VCOM preloader drivers
youtu.be/O2XWTAYmNUo
aIecxs said:
you can readback ROM from SP Flash Tool on windows (complicated) or mtkclient on linux (easier). I am lazy but have written already here and there many times. some of the links might help.
https://forum.xda-developers.com/t/4541917/post-88021497
(no support via pm, keep it in the threads)
Click to expand...
Click to collapse
Bro have you a mod version of netflix working on this car android ?
I need netflix and shahid
The shahid it make errors to me : this version not compatible with your android version
Please is there any help
I don't have android head unit in car. I don't have netflix account.
aIecxs said:
I don't have android head unit in car. I don't have netflix account.
Click to expand...
Click to collapse
Ok whats the best way to install magisk into this android, i have only port reading USB, so how can i flash the boot of the android with magisk ?
disconnect from battery and get VCOM preloader drivers installed. SP Flash Tool is fine on locked bootloader, fastboot is best on unlocked bootloader.
Related
Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29
Files You Need To Download:
1:Miracle Box Tool-https://mega.nz/#!lVsQGSaC!6TTJopMyntMQA0IKYdC_5BlsxIjV_Ibhx2qWL_ZqDyI
2:Stock Rom- https://mega.nz/#F!ncMFUaaa!0fVNwJ_Io0EMFv8YLjBZlQ [Select Download As Zip]
3:https://androidmtk.com/install-android-cdc-driver-manually [Install Drivers Using This Guide]
Click to expand...
Click to collapse
Steps To Flash Stock Rom:
1:Install Miracle Box And Drivers
2:Launch Miracle Box
3: Open Mtk Tab
4:Click on Services
5:Select Write From The Available Options
6:Select 8th Boot From Boot Options
7:In Second Options,Select Oppo Realme 1
8:Check Skip Preloader File
9:Hit Start
10:Now connect your phone and hold volume and power buttons... It will flash and turn off your phone
11:Remove Cable And Press Power+VOLUME Up For 15 Seconds
You Have Unbricked Your Device
Click to expand...
Click to collapse
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)
1st link miracle box is not working plz correct it bro
can you share download links from other providers? mega asks for premium account.
thank you.
Didn't work for me
anurag rai said:
Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)
Click to expand...
Click to collapse
After flashing twrp recovery when I booted my device, a software update popped up and it automatically updated over night and my device hard bricked. I tried everything but couldn't fix it. My pc is not even recognising my phone so can't follow your steps. Any suggestion or help to fix my device will be appreciated.
same mine bro,
rom version was a31 and after installed twrp, my device hard bricked. i couldnt solve yet, waiting a newer version of miracle box or etc.
anurag rai said:
Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)
Click to expand...
Click to collapse
i dumped the stock rom bro @besttipsYT Not Shobith
this method is not working at this time...when i trying to flash by this method only show.......phone connected......downloding boot8....then disconnect my phone ..&reboot
Please don't flash custom recovery (here twrp) without proper knowledge or just sake of modding device. The builds and methods are not always working and may end up bricking your device.
Hi There, Can someone PLZ help me setting up OPPO PRELOADER Drivers correctly. Everytime i try to use miracle thunder i get the following log:
Waiting for USB Port...
Set USB Serial Device (COM9)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6771 SW:0000 Ver: CA00
>>Downloading Boot8 ...
and it remains on here forever.
Actually oppo preloader shows for some time in pc and after that it goes away and hence it is not letting the miracle thunder work properly (i guess)
when my phone was working (booting in coloros 6, then also oppo preloader was doing the same thing and after a few seconds my battery would start charging), now i can't see anything on screen as it's bricked now.
Preloader doesn't even work with SP Flash Tools also.
EDIT : I have tried almost everything i knew, drivers manager add legacy option etc.
If someone could help me get out of this problem, i would really be grateful.
Brick Reason : Flashed TWRP but used fastboot command to boot into that : (
PLEASE HELP SOMEONE
Alen012 said:
Hi There, Can someone PLZ help me setting up OPPO PRELOADER Drivers correctly. Everytime i try to use miracle thunder i get the following log:
Waiting for USB Port...
Set USB Serial Device (COM9)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6771 SW:0000 Ver: CA00
>>Downloading Boot8 ...
and it remains on here forever.
Actually oppo preloader shows for some time in pc and after that it goes away and hence it is not letting the miracle thunder work properly (i guess)
when my phone was working (booting in coloros 6, then also oppo preloader was doing the same thing and after a few seconds my battery would start charging), now i can't see anything on screen as it's bricked now.
Preloader doesn't even work with SP Flash Tools also.
EDIT : I have tried almost everything i knew, drivers manager add legacy option etc.
If someone could help me get out of this problem, i would really be grateful.
Brick Reason : Flashed TWRP but used fastboot command to boot into that : (
PLEASE HELP SOMEONE
Click to expand...
Click to collapse
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.
Bootloop if i try t access fastboot mode. Can go to recovery but its not allowing me to flash amything saying its an older version. Any work around yet?
Naveen56 said:
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.
Click to expand...
Click to collapse
StripsOfTatti said:
Bootloop if i try t access fastboot mode. Can go to recovery but its not allowing me to flash amything saying its an older version. Any work around yet?
Click to expand...
Click to collapse
Which recovery are you in? Is it Stock or Custom?
If u have stock first wipe data and then flash boot.img or ozip file (stock ROM).
If u have custom recovery then you need to flash stock recovery + stock ROM.
plz help me ihave realme 1 and it stuck in logo and orange state and restart over and over and icannot boot into recovery or fastboot plz help me
Simba Gaara said:
plz help me ihave realme 1 and it stuck in logo and orange state and restart over and over and icannot boot into recovery or fastboot plz help me
Click to expand...
Click to collapse
If recovery and fastboot are inaccessible means you need to visit service center.
When trying to connect realme 1 to miracle it showing usb device not connected, how to solve this? Drivers are installed
Naveen56 said:
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.
Click to expand...
Click to collapse
So bro in case if I brick my phone then I can flash stock rom using stock recovery.......??
Do I get those Rom files from official realme website?
AwesomeVk47 said:
So bro in case if I brick my phone then I can flash stock rom using stock recovery.......??
Do I get those Rom files from official realme website?
Click to expand...
Click to collapse
Yes. Do remember you need both fastboot and recovery to be working, so you can flash Stock Recovery (only if you have TWRP installed).
If you have stock recovery installed then download stock rom from official Realme site and place it in the Sdcard (otg wont help). Enter into recovery and update/install the ozip.
If your phone is completely dead then above method wont help and you have to follow another one.
Note: If your device is rooted then installing (from stock recovery) stock rom fails. At this time flash TWRP from fastboot then flash zip file (convert stock rom from ozip to zip).
Naveen56 said:
Yes. Do remember you need both fastboot and recovery to be working, so you can flash Stock Recovery (only if you have TWRP installed).
If you have stock recovery installed then download stock rom from official Realme site and place it in the Sdcard (otg wont help). Enter into recovery and update/install the ozip.
If your phone is completely dead then above method wont help and you have to follow another one.
Note: If your device is rooted then installing (from stock recovery) stock rom fails. At this time flash TWRP from fastboot then flash zip file (convert stock rom from ozip to zip).
Click to expand...
Click to collapse
Sorry to bother you bro but let's say I bricked my phone and have twrp installed......where will I get the stock recovery from and how to enter the fastboot mode of realme phone if it's bricked
AwesomeVk47 said:
Sorry to bother you bro but let's say I bricked my phone and have twrp installed......where will I get the stock recovery from and how to enter the fastboot mode of realme phone if it's bricked
Click to expand...
Click to collapse
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Code:
fastboot oem reboot-recovery
Install ozip.
Naveen56 said:
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Install ozip.
Click to expand...
Click to collapse
Is that link for realme 1 stock recovery?.......it would be great help if you could tell me how to obtain it....just for future use
---------- Post added at 03:18 PM ---------- Previous post was at 03:07 PM ----------
Naveen56 said:
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Install ozip.
Click to expand...
Click to collapse
Will this link work for stock rom file?
Link1
https://www.realme.com/in/support/software-update
Link2
https://www.getdroidtips.com/oppo-realme-1-stock-firmware-collections/
Which one of these should I use?
Please help
I bricked my OP7 Pro , i unlocked it , and install recovery normally
then i tried to install Havac OS , and when i am in TWRP , i did restart to recovery , but the phone stuck in fastboot
what i did so far , i installed fastboot rom 10.0 , do flash all.bat but it keep stuck on fastboot
i am not sure on what version of OS i was.
can any one help me ?
You should be able to recover from this by using the MSM tool. Download that and make sure you follow instructions on installing the correct USB driver. You'll boot the phone with VolUP/VolDN pressed while you connect the phone to a computer and the MSM tool should be able to wipe and put software back on.
fastboot versions are beta's. Check these links.
https://forum.xda-developers.com/oneplus-7-pro/how-to/guide-mega-unbrick-guide-hard-bricked-t3934659
Use this link for Root tools.
https://forum.xda-developers.com/on...pro-roms-kernels-recoverys-firmwares-t3931126
Downgrade tool if you're not happy on Q.
https://techbeasts.com/downgrade-android-q-dp-to-android-pie-on-oneplus-7-pro/
blas4me said:
fastboot versions are beta's. Check these links.
https://forum.xda-developers.com/oneplus-7-pro/how-to/guide-mega-unbrick-guide-hard-bricked-t3934659
Use this link for Root tools.
https://forum.xda-developers.com/on...pro-roms-kernels-recoverys-firmwares-t3931126
Downgrade tool if you're not happy on Q.
https://techbeasts.com/downgrade-android-q-dp-to-android-pie-on-oneplus-7-pro/
Click to expand...
Click to collapse
Nic2112 said:
You should be able to recover from this by using the MSM tool. Download that and make sure you follow instructions on installing the correct USB driver. You'll boot the phone with VolUP/VolDN pressed while you connect the phone to a computer and the MSM tool should be able to wipe and put software back on.
Click to expand...
Click to collapse
Thanks , From where i can download MSM tool ? can you help me to find the thread ?
also what the steps please ? i am newbie
fixed ,
i followed this link
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691
new_world_2006 said:
fixed ,
i followed this link
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691
Click to expand...
Click to collapse
it's all the same crew.
Help me. pls . i cant boot to fastboot
Lingg said:
Help me. pls . i cant boot to fastboot
Click to expand...
Click to collapse
If you have TWRP then you are saved otherwise you need to visit service centre.
Lingg said:
Help me. pls . i cant boot to fastboot
Click to expand...
Click to collapse
Search internet how to enter edl mode to flash ROM with Qfil
People are willing to help, but no response from the post creator. Many others might be in the same situation waiting for a solution. Come on.
I've bricked my device countless times but it only disabled booting to system and recovery for me. Fastboot always kept usable for me no matter how badly I messed up anything. Then I could flash twrp and vbmeta through fastboot.bat solution on PC and finally a working ROM from TWRP. What did you do? Please write about your situation in detail so I might try to come up with a solution. I'm also a realme Q user.
jijojamie said:
People are willing to help, but no response from the post creator. Many others might be in the same situation waiting for a solution. Come on.
Click to expand...
Click to collapse
You need to open your phone and "short" the board using a paperclip or tweezers
Install Qualcomm Snapdragon drivers on pc
When you connect your phone it will appear as Qualcomm 9008 in device manager of windows
Download Qfil flashing program from Qualcomm..install it. ..run it ..it will detect your phone
Flash stock fastboot rom to device using QFIL
nobody can do all the work for you
Google :
-Testpoint realme
-Qfil Qualcomm
-Qualcomm 9008 drivers
- fastboot stock ROM realme
-emmc firehose programmers files realme
KevMetal said:
You need to open your phone and "short" the board using a paperclip or tweezers
Install Qualcomm Snapdragon drivers on pc
When you connect your phone it will appear as Qualcomm 9008 in device manager of windows
Download Qfil flashing program from Qualcomm..install it. ..run it ..it will detect your phone
Flash stock fastboot rom to device using QFIL
nobody can do all the work for you
Google :
-Testpoint realme
-Qfil Qualcomm
-Qualcomm 9008 drivers
- fastboot stock ROM realme
-emmc firehose programmers files realme
Click to expand...
Click to collapse
Ohhh god, that's so advanced stuff.
Msg misunderstood...
I just said there maybe others in the same situation, not me. I won't dare to open my phone and do those stuff because i have messed many in the past. I am on stock rom and very happy..
I was just concerned about the person who posted this thread. Sorry if you misunderstood my msg.
I upgraded to realme ui 1.0, and then formatted data. The result is the same as you. Finally, I can only change the motherboard
gigdn said:
I upgraded to realme ui 1.0, and then formatted data. The result is the same as you. Finally, I can only change the motherboard
Click to expand...
Click to collapse
If you are on RUI 1.0, you will have fastboot and stock recovery access. You can download latest UI and install it via stock recovery. Why change MB?
KevMetal said:
You need to open your phone and "short" the board using a paperclip or tweezers
Install Qualcomm Snapdragon drivers on pc
When you connect your phone it will appear as Qualcomm 9008 in device manager of windows
Download Qfil flashing program from Qualcomm..install it. ..run it ..it will detect your phone
Flash stock fastboot rom to device using QFIL
nobody can do all the work for you
Google :
-Testpoint realme
-Qfil Qualcomm
-Qualcomm 9008 drivers
- fastboot stock ROM realme
-emmc firehose programmers files realme
Click to expand...
Click to collapse
I am not able to get emmc firehose file for realme x2 pro.. still searching for that. can you suggest me where to get?
Hi everyone, I tried to flash a patched Magisk boot image on my Ulefone Armor 8 Pro via fastboot but the device is now stuck in bootloop. I have already read some threads about trying to flash the stock firmware using the proprietary SP Flash Tool, but the phone doesn't remain in download mode for more than a few seconds. I can't even boot in recovery/fastboot mode again to try to flash the stock boot image since the phone just keeps rebooting. If someone could give me a hint it would be really appreciated.
stwm25 said:
Hi everyone, I tried to flash a patched Magisk boot image on my Ulefone Armor 8 Pro via fastboot but the device is now stuck in bootloop. I have already read some threads about trying to flash the stock firmware using the proprietary SP Flash Tool, but the phone doesn't remain in download mode for more than a few seconds. I can't even boot in recovery/fastboot mode again to try to flash the stock boot image since the phone just keeps rebooting. If someone could give me a hint it would be really appreciated.
Click to expand...
Click to collapse
You need write the model of device.
Currently I know of 3 models: 4GB RAM(Armor 8); 6&8GB RAM(Armor 8 Pro).
So with the correct stock ROM you can flash the device.
To use SPFT you need to specify which OS you have: Linux; Win7_8_10; other
This is to know if you actually installed the USB MTK drivers correctly and if further action is needed.
Also, write if you have the device with the bootloader locked or unlocked.
I have the 6GB RAM and have downloaded a time ago the GQ3090RH3_KSX70H_Ulefone_20210902_V01(Non-EU).zip file aka stock ROM. That's aka Non_EEA model. In the Ulefone site have SP_MDT_exe_v3.2048.02.00(Client).zip aka flash tool.
You used that tool?
Thanks for the reply. I have the model with 6GB of RAM as well and I am currently trying to recover my phone by using Windows 11 in a virtual machine. The bootloader is unlocked and I tried to flash the EU version of the stock ROM (GQ3090RH3_KSX70H_Ulefone_EEA_20210902_V01(EU).zip) by using SP_MDT_exe_v3.2048.02.00(Client).zip (after installing the required drivers), but as I have already specified I can't boot in download mode for more than a few seconds. My computer recognises the device as "MediaTek MT65xx Preloader" but the phone immediately reboots and I am not able to flash the stock ROM.
stwm25 said:
Thanks for the reply. I have the model with 6GB of RAM as well and I am currently trying to recover my phone by using Windows 11 in a virtual machine. The bootloader is unlocked and I tried to flash the EU version of the stock ROM (GQ3090RH3_KSX70H_Ulefone_EEA_20210902_V01(EU).zip) by using SP_MDT_exe_v3.2048.02.00(Client).zip (after installing the required drivers), but as I have already specified I can't boot in download mode for more than a few seconds. My computer recognises the device as "MediaTek MT65xx Preloader" but the phone immediately reboots and I am not able to flash the stock ROM.
Click to expand...
Click to collapse
Win11 is not good to use SP tool.
Maybe using Win10?!
"MediaTek MT65xx Preloader" is normal but need installing drivers correctly. You can try this: Driver_Auto_Installer_EXE_v5.1632.00.zip - 8.8MB
Reboot VM and try with the device turned off!
For using SPFT or SP_MDT your device not need in the bootloader mode. Device turned off - conect USB - look about USB PORT COM - Scan - Start All
If you not know how to do so Read Upgrade software guide for factory assembly line.pdf
Here file and more about: Upgrade tools and USB driver - Armor 8 Pro
___________________________
UP: Maybe SP need more than you know.
I used the SPFT and worked good to me with Win10.
May be SPFT can help more than SP: SP_Flash_Tool_v5.2124_Win
For using SPFT your device not need in the bootloader mode. Device turned off - open sxcatter file - look for Download Only option (NOT use FORMAT+....!!!!) - now with the device turned off conect USB - press DOWNLOAD (Ctrl + D).
Well, you saved my phone. Thanks for the help, I really appreciate that. I installed Windows 10 and the drivers you linked me and via SP Flash Tool I managed to flash the stock ROM after connecting the device with a USB cable. Thanks again.
How do I get this phone into download mode? Cannot seem to get it to flash
I've followed your tips but I cannot get the phone recognized by the flash tool.
I've collected full details here: https://android.stackexchange.com/questions/248035/bootloop-in-ulefone-armor-8-pro
Can SPFT be used with Linux?
jlbradl said:
How do I get this phone into download mode? Cannot seem to get it to flash
Click to expand...
Click to collapse
I know the fastboot mode. It is entered by pressiong Volume + and power button simultaneously.
stwm25 said:
Thanks for the reply. I have the model with 6GB of RAM as well and I am currently trying to recover my phone by using Windows 11 in a virtual machine. The bootloader is unlocked and I tried to flash the EU version of the stock ROM (GQ3090RH3_KSX70H_Ulefone_EEA_20210902_V01(EU).zip) by using SP_MDT_exe_v3.2048.02.00(Client).zip (after installing the required drivers), but as I have already specified I can't boot in download mode for more than a few seconds. My computer recognises the device as "MediaTek MT65xx Preloader" but the phone immediately reboots and I am not able to flash the stock ROM.
Click to expand...
Click to collapse
did you fix your phone?
Alex76rod said:
did you fix your phone?
Click to expand...
Click to collapse
i have the same problem.
it wont stay turn off
so the sp tool can't flash it.
I didn't know what I was doing and now I'm paying the price (tbf the guides I found weren't very beginner friendly).
I tried installing Magisk on my device. The guides online told me to use a .img file patched by the app and flash it. I did that and now I'm stuck in fastboot mode.
Sorry if I need stuff explained. A lot of this goes over my head and evidence shows that I'm dumb, so bare with me.
You don't flash the boot image or you risk a brick, use fastboot boot boot.img instead. When it boots, open Magisk and do the direct install.
To fix it you'll need to get a stock copy of your boot image and try flashing that or just use the MSM Tool for your device.
karmazogs said:
I didn't know what I was doing and now I'm paying the price (tbf the guides I found weren't very beginner friendly).
I tried installing Magisk on my device. The guides online told me to use a .img file patched by the app and flash it. I did that and now I'm stuck in fastboot mode.
Sorry if I need stuff explained. A lot of this goes over my head and evidence shows that I'm dumb, so bare with me.
Click to expand...
Click to collapse
Index of /list/Unbrick_Tools
You can also find the variant for your particular device and MSM the device back to stock. Easy to do. This is how a OnePlus tech remotely fixes a device without being sent in.
mattie_49 said:
Index of /list/Unbrick_Tools
You can also find the variant for your particular device and MSM the device back to stock. Easy to do. This is how a OnePlus tech remotely fixes a device without being sent in.
Click to expand...
Click to collapse
I have the MSM downloader but it says I need a username and password?
EDIT: Nevermind I figured it out.
What does EDL mode look like btw? Is it just a black screen or does it tell you?
karmazogs said:
What does EDL mode look like btw? Is it just a black screen or does it tell you?
Click to expand...
Click to collapse
It's a black screen.
Power off device. Hold vol +/- while inserting usb cable. Should be in EDL mode. PC will make a sound or MSM will say "connected".
First off you could always extract the ROM that you're using by downloading ROM and payload.bin dumper, extract pay load takes a long time please wait till the window closes by itself. Make sure your bootloader is unlocked.
reflash the boot.img over your device through fastboot mode with the extracted boot.img.
Make sure you open command prompt inside the folder that contains the fastboot files and adb files to run fastboot in command prompt. Connect your phone in fastboot mode.
/Fastboot flash boot boot.img
Boot.img has to be located within your fastboot files that you have downloaded. Or if you internally installed with platform-tools then use that specified folder and insert your boot.img there. If you do not command prompt won't be able to locate the file and will fail.
If it does not boot after successfully flashing stock boot.img you will have to follow a tutorial to use MSMtool for OnePlus 9. Depending on what firmware you need download appropriate files,. Make a space on your computer for your files because there will be a lot. Or you could also format data and see if that was the problem before considering MSM tool
You need the correct drivers for EDL mode to function correctly, you also may want to install OnePlus drivers from there website.,
For EDL mode to be detected with OnePlus 9 you must download a driver called
Qualcomm HS-USB QDloader 9008
Anymore questions feel free to PM me I may be able to help and same with some of the other guys on here that have also commented above.