Hi all,
I'm looking for the phone that allows charging and using OTG simultaneously. I have the Carplay adapter that can be connected to the android phone and I want to use it in my motorcycle as media dashboard. The problem I'm facing right now is that every phone I'm using doesn't support the charging. When I connect the power supply the communication with accessory stops and when it's disconnected the accessory is working again.
I was testing on Motorola G31, Samsung S10 and Pixel 2 XL. The adapter itself works fine as I was testing it on my Macbook and I can charge and use usb accessory at the same time.
If you know some phone that will work I would be greatfull for the recommendation. I prefer the usbc connection.
The second question I have which is way less important. Is there an custom rom that is very lightweight and allow just to run the application for the adapter to boot as fast as possible?
=====================================================
For anyone looking for simple answer I can confirm that Poco X3 is working fine, if you know other phones please add a post
LexDuck said:
(...)
I'm looking for the phone that allows charging and using OTG simultaneously. (...)
Click to expand...
Click to collapse
Does this phone support OTG and charging at the same time?
I am running Havoc OS 3.x but cannot charge and use otg at the same time, do I need a custom kernel or is this not supported on this phone
forum.xda-developers.com
ze7zez said:
Does this phone support OTG and charging at the same time?
I am running Havoc OS 3.x but cannot charge and use otg at the same time, do I need a custom kernel or is this not supported on this phone
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks man for the link, but honestly I don't know how it should help in my case
Fun with resistors (home/car dock mode + more)
We've already established that a resistor on the micro USB port can be used to force the Galaxy S into download mode, but the USB switching chip used on the phone has a lot of other capabilities that are triggered by different resistors between...
forum.xda-developers.com
Android tab which supports OTG and charging at the same time
I'm looking for devices (Android tablets) which supports OTG (to connect slave-devices, e.g., a mouse) and charging at the same time There was a thread about Nexus 7 https://forum.xda-developers.com/tab-s2/help/usb-otg-charge-t3588019 It needed...
forum.xda-developers.com
if you read through the links you will stumple about explanation why USB-C don't have any OTG mode at all..
aIecxs said:
(...) USB-C don't have any OTG mode at all..
Click to expand...
Click to collapse
Is it possible that gsmarena is wrong?
micro USB OTG port has ID pin which is shorted to GND to determinate the host.
where is ID pin on USB-C?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
aIecxs said:
where is ID pin on USB-C?
Click to expand...
Click to collapse
It's just that people buy it and it works, because they don't think about the number of pins.
aIecxs said:
if you read through the links you will stumple about explanation why USB-C don't have any OTG mode at all..
Click to expand...
Click to collapse
Say what??? You're killing me.
Yes, of course there is OTG over USB 3 Type C.
You buy a (passive) adapter and it works, just like with micro USB 2.
Now you're going to ask me how.
I actually have a device that I build that switches dynamically straight USB vs OTG.
It's a 5.1k resistor from a CC to ground puts it in OTG.
Here's a video of two Androids hooked together with one being a "digitizer" and the other using it through a OTG adapter.
See: https://www.amazon.com/24pin-USB-C-Resistor-Black-Housing/dp/B07T97LC9L
I've found the youtube channel that shows that it's possible using Poco X3.
Here's an adapter I made for Type C. You can use it normally (with a straight micro USB cable) or as OTG with a micro USB OTG adapter.
And if you connect it to a 5 wire device that switches the micro USB ID, then it can do both alternately.
The black heat shrink hides a 5.1k resistor.
Oh, as far as PD goes:
Code:
# USB power role changes
on property:sys.usb.typec.power_role=source
write /sys/class/dual_role_usb/otg_default/power_role ${sys.usb.typec.power_role}
on property:sys.usb.typec.power_role=sink
write /sys/class/dual_role_usb/otg_default/power_role ${sys.usb.typec.power_role}
you should maybe read about USB-C and its protocols especially USB-PD.
oh I have one too, and it works. with custom kernel you can even charge on host mode.
smnc said:
USB-C devices don't use USB On-The-GO (OTG) like the older devices discussed here, instead they use something called Dual-Role-Mode/Dual-Role-Devices (DRD).
Whereas USB-OTG host/client was determined by hardware; DRD uses context to determine the host/client devices, which needs to be implemented in firmware/software/logic.
Click to expand...
Click to collapse
https://microchipsupport.force.com/s/article/How-to-do-USB-On-the-go-OTG-on-USB-Type-C
aIecxs said:
you should maybe read about USB-C and its protocols especially USB-PD.
oh I have one too, and it works. with custom kernel you can even charge on host mode.
View attachment 5822233
https://microchipsupport.force.com/s/article/How-to-do-USB-On-the-go-OTG-on-USB-Type-C
Click to expand...
Click to collapse
Uh, what?
I'm fully aware of how USB-C signalling works, thanks.
The link you pointed me to confirms exactly what I said:
All existing OTG methodologies (ID pin, Host Negotiation Protocol, and Session Request Protocol) are prohibited from being used on USB Type-C ports!
Click to expand...
Click to collapse
@smnc if I would reply to you I would have mentioned you. I just quoted your post from another thread.
Maybe you don't know this, but if you quote someone, it actually does tag them, exactly like a reply.
If you don't want to drag someone into a conversation you can just copy/paste the text and then manually apply the quote formatting.
Have a good evening.
Yawn.
Of course there is no "OTG" in Type C.
But if somebody wants to use a regular USB A plug of a keyboard/mouse on their Type C device they just buy an "OTG adapter".
USB Type-C plugs associated with the “A” end of a legacy adapter cable are required to have Rd (5.1 kΩ ± 20%) termination incorporated into the plug assembly – see Section 4.5.3.2.1.
Click to expand...
Click to collapse
smnc said:
If you don't want to drag someone into a conversation you can just copy/paste the text and then manually apply the quote formatting.
Click to expand...
Click to collapse
I don't think it's polite to quote people without giving a citation.
Related
Is it possible?
My xoom is NOT rooted and I do not intend to root it. I just want to manual update it because the update still haven't showed up on the device
Thx.
Sorry, nope. I'm in the same boat with an unactivated 3g.
Hi, I also have a non rooted wifi Xoom and I just downloaded the Honeycomb 3.1 update zip file but I don't know how to install it. Any idea?
Thanks
rfreddy said:
Hi, I also have a non rooted wifi Xoom and I just downloaded the Honeycomb 3.1 update zip file but I don't know how to install it. Any idea?
Thanks
Click to expand...
Click to collapse
several how-to guides available. You must have a USB micro-USB female OTG adapter and a thumb drive. If you don't, go get one then read these forums again.
slack04 said:
several how-to guides available. You must have a USB micro-USB female OTG adapter and a thumb drive. If you don't, go get one then read these forums again.
Click to expand...
Click to collapse
Yes, the problem is that i don´t have one right now and can´t get one shipped quickly. I live in Brazil and bought one on ebay last week. It´s coming from Hong Kong lol
But i have read on the forum that the recovery option trough USB is avaible ONLY to 3G models and that´s not my case. Is that true?
Thx.
Tried OTG Cable - No Luck
I tried the procedure outlined in the forums. I've made my own OTG cable by connecting a gender USB Female-to-Female adapter. Tried formatting my San Disk Cruzer or even micro-SD to USB converter and following the procedure. I get E: Cannot locate /sdcard (No such file or directory) I have the update.zip file in the root of either the thumbdrive or microSD card plugged into the microSD to USB converter. I saw someone make their own cable and provide a photo and I pretty much did the same thing. Any ideas?
OTG in any USB cable?
jstefani said:
I tried the procedure outlined in the forums. I've made my own OTG cable by connecting a gender USB Female-to-Female adapter. Tried formatting my San Disk Cruzer or even micro-SD to USB converter and following the procedure. I get E: Cannot locate /sdcard (No such file or directory) I have the update.zip file in the root of either the thumbdrive or microSD card plugged into the microSD to USB converter. I saw someone make their own cable and provide a photo and I pretty much did the same thing. Any ideas?
Click to expand...
Click to collapse
Someone should correct me if I'm wrong, but an OTG cable is different from a converter. OTG is a specification that requires a very small chip in the cable. All you made with a F-F adapter is a USBmicro to USB converter. But the idea was good
Anyone know if the OTG is built into the USB cable that came with the xoom? Is it built into any cable? I can get a F-F adapter tomorrow and give this a try, but if someone says that it's never in the cables then I won't bother.
host cable doest need any chip.
I bought a standard USB adapter and connected pin 4 to pin 5 on the micro USB plug side, worked great.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
poisike said:
host cable doest need any chip.
I bought a standard USB adapter and connected pin 4 to pin 5 on the micro USB plug side, worked great.
Click to expand...
Click to collapse
NICE! How sis you connect the wires? Did it require soldering? There's lot's of people on here who would love to know how you did this!
slack04 said:
NICE! How sis you connect the wires? Did it require soldering? There's lot's of people on here who would love to know how you did this!
Click to expand...
Click to collapse
Yes, i did solder the wire. I removed the plastic cover with a knife and soldered the wire to the pins 4 and 5.
I must say I'm not good at soldering, but it worked, so i believe anyone can do it. Just check with a multimeter that there is no short with other pins before you use your creation.
The LG V20 H990ds supports USB to Ethernet adapter over OTG. Just connect the adapter (USB or micro-usb) to the USB-C port and choose from the notifications panel "Power supply (charge the connected device)".
Tested working adapters are:
Apple A1277
and Ugreen USB 2.0 OTG to RJ45 Ethernet Network Adapter 10/100Mbps (use Aukey micro-USB to USB-C adapter model CB-A9).
You can see the ethernet interface called "sit0" with app Ethwork - Network interfaces:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LG V20 H990ds just after connecting the OTG USB to Ethernet adapter. Notice the USB symbol in the notifications bar, then you should select Connection type.
Choose Power Suply -> Charge the connected device from notification panel. Notice that you are connected to ethernet when the symbol <-> is shown.
Interface sit0 being shown in Ethwork.
List of all interfaces shown in Ethwork.
Check this thread to get a list of adapters:
(OTG) List of USB to ethernet RJ45 adapters that work with Nexus devices
Samsung Galaxy S8/S8+ capabilities:
THE NEW SAMSUNG GALAXY S8 AND S8+ WITH PLUGABLE USB-C PRODUCTS
thanks for the tip
Does it matter which OS?
Are you using Android 6 or 7?
Also, does the adapter work even if you don't install the Ethwork app?
Also here's another adapter that works on nexus, but the company says does not work on LG due to missing driver....
https://forum.xda-developers.com/sho....php?t=2238840
scandiun said:
Samsung Galaxy S8/S8+ capabilities:
THE NEW SAMSUNG GALAXY S8 AND S8+ WITH PLUGABLE USB-C PRODUCTS
Click to expand...
Click to collapse
Wrong forum
oldnewbie2 said:
Are you using Android 6 or 7?
Click to expand...
Click to collapse
Also, does the adapter work even if you don't install the Ethwork app?
---------- Post added at 01:20 AM ---------- Previous post was at 12:44 AM ----------
oldnewbie2 said:
Also, does the adapter work even if you don't install the Ethwork app?
Click to expand...
Click to collapse
Also here's another adapter that works on nexus, but the company says does not work on LG due to missing driver....
https://forum.xda-developers.com/showthread.php?t=2238840
I forgot to say something: to really know that you are connected over ethernet and not over wifi, you can check that with the utility IP Tools: Network utilities.
Check for Connection type: ethernet inside "IP information" tab.
Always check for the <···> in the status (notification) bar and wait some seconds for the connection to stabilize before checking.
Connection doesn't work for me on LG G5
I don't see the <...> icon. I am using the Plugables USB-C adapter based on the same chip as the others.
sit0 interface enabled(up) in Ethwork says No. How do I bring it up?? But also in the screen shots above
sit0 says No but the <....> is present. What does that mean??
oldnewbie2 said:
I don't see the <...> icon. I am using the Plugables USB-C adapter based on the same chip as the others.
sit0 interface enabled(up) in Ethwork says No. How do I bring it up?? But also in the screen shots above
sit0 says No but the <....> is present. What does that mean??
Click to expand...
Click to collapse
Select charge for USB connection.
Cool to hear this! I wonder if it will work on the US996 model? But more than that I would love to get it working on my tablet (V525) which I use for game streaming; it would be cool to have the option of using a hardline rather than Wi-Fi when available. I'm not holding out too much hope that I'd be able to though because I've looked up a bunch of USB Ethernet adapters that are advertised to work on Android and I've seen a lot of "no support for LG devices". I could see LG going the extra mile and adding support for their flagships like the V20 but I don't know about a mid-range tablet.
Which adapter
scandiun said:
The LG V20 H990ds supports USB to Ethernet adapter over OTG. Just connect the adapter (USB or micro-usb) to the USB-C port and choose from the notifications panel "Power supply (charge the connected device)".
Tested working adapters are:
Apple A1277
and Ugreen USB 2.0 OTG to RJ45 Ethernet Network Adapter 10/100Mbps (use Aukey micro-USB to USB-C adapter model CB-A9).
You can see the ethernet interface called "sit0" with app Ethwork - Network interfaces:
LG V20 H990ds just after connecting the OTG USB to Ethernet adapter. Notice the USB symbol in the notifications bar, then you should select Connection type.
Choose Power Suply -> Charge the connected device from notification panel. Notice that you are connected to ethernet when the symbol <-> is shown.
Interface sit0 being shown in Ethwork.
List of all interfaces shown in Ethwork.
Check this thread to get a list of adapters:
(OTG) List of USB to ethernet RJ45 adapters that work with Nexus devices
Click to expand...
Click to collapse
Hi
Which adapter did you test to get this to work?
mkermali99 said:
Hi
Which adapter did you test to get this to work?
Click to expand...
Click to collapse
Almost any adapter works, I mention two of them that work.
mkermali99 said:
Hi
Which adapter did you test to get this to work?
Click to expand...
Click to collapse
Tested the Anker and the Ugreen, and both work perfect. Couldn't test the Apple because couldn't find it, but I'm pretty sure it will work too.
THE GOOD:
I bought a USB-C hub (TOPGEEK USB C to HDMI 3-in-1 Digital Multiport Adapter on Amazon for $21.99, can't post the link on here) for my Chromebook Pro and it works great mirroring and extending the desktop on an external monitor. I figured I'd give it a shot on my unlocked S8+, and low and behold, it launched Dex from my phone without help from any 3rd party app, rooting the device, etc.!
THE BAD:
I can run Dex and have connected a USB keyboard/mouse combo, but this setup only works using the phone battery. As soon as I plug in the Samsung charger, it kills Dex and exits the app. I tried skipping the HDMI cord and just tried charging the S8, but that does not work either -- BUT, it will charge the chromebook. So I am confused as ever, and everything I've read on XDA, googled, YouTubed, etc. does not match exactly what I'm using or have setup, so it's hard to draw any conclusions.
Any thoughts of what could be going on? I'm tempted to buy another hub, but I don't know what to look for that would fix my problem.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Anyone have a suggestion of what to try next? I thought there'd be more excitement since I am not rooted, did not flash a custom kernel, etc. Just plugged in the USB-C hub and launched Dex directly.
Or am I missing something??? Nothing I've read exactly matches the case I've got right now...
gime_time said:
Anyone have a suggestion of what to try next? I thought there'd be more excitement since I am not rooted, did not flash a custom kernel, etc. Just plugged in the USB-C hub and launched Dex directly.
Or am I missing something??? Nothing I've read exactly matches the case I've got right now...
Click to expand...
Click to collapse
It certainly is curious, but it still is Dex. - totally not interesting for 99% of the S8(+) Users. Plus it´s already achievable through custom Kernels.
gime_time said:
THE GOOD:
I bought a USB-C hub (TOPGEEK USB C to HDMI 3-in-1 Digital Multiport Adapter on Amazon for $21.99, can't post the link on here) for my Chromebook Pro and it works great mirroring and extending the desktop on an external monitor. I figured I'd give it a shot on my unlocked S8+, and low and behold, it launched Dex from my phone without help from any 3rd party app, rooting the device, etc.!
THE BAD:
I can run Dex and have connected a USB keyboard/mouse combo, but this setup only works using the phone battery. As soon as I plug in the Samsung charger, it kills Dex and exits the app. I tried skipping the HDMI cord and just tried charging the S8, but that does not work either -- BUT, it will charge the chromebook. So I am confused as ever, and everything I've read on XDA, googled, YouTubed, etc. does not match exactly what I'm using or have setup, so it's hard to draw any conclusions.
Any thoughts of what could be going on? I'm tempted to buy another hub, but I don't know what to look for that would fix my problem.
Click to expand...
Click to collapse
For using Dex and charging simultaneously you can use the wireless charger free given by Samsung. Let me know if that works
Wireless charger offer still active?
Can anyone confirm for me whether Samsung is still offering the free wireless charger for new S8/S8+ owners? I have a new AT&T Galaxy S8+ and it does not have the "My Galaxy" app loaded on it. I also can't find it in either the Play Store or the Galaxy Apps store. Does anyone know if this offer is still being honored? I see a page about it on the Samsung website, but all the instructions talk about using the "My Galaxy" app to get the coupon code to claim one.
Thanks!
sp1312 said:
For using Dex and charging simultaneously you can use the wireless charger free given by Samsung. Let me know if that works
Click to expand...
Click to collapse
Has anyone tried to connect the S8 to a USB-C enabled display (that also possess a USB hub) to see if it would work (as the USB-C from the display should deliver power and data)
Hello all!
I have bought the Apple Carplay Dongle with the app called AutoPlay. (https://www.amazon.de/gp/product/B076D2BP4S) The App and the dongle have the newest version.
The problem is that the head unit will start completely new or the connection get lost to the device. I tried several devices (iPhone 5S, iPhone 6S Plus, iPhone 7 Plus, iPhone X) - I also changed the lightning cable.
The usb from my device is working. Maybe I do something wrong?
I used a XTRONS, Android 8, Octa-Core, 4GB RAM, 32GB ROM device.
Some suggestions would be great.
Just curious, what did the reseller suggest?
marchnz said:
Just curious, what did the reseller suggest?
Click to expand...
Click to collapse
They told me that everything worked fine at their devices. I bought it at a german reseller. Is it possible to get in touch with the creator?
I attached a photo of my versions. Maybe you have some ideas?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Have you tried using a powered USB hub? These Carplay dongles often need more than 500mA
Does anyone know the Autoplay Android app developer? We need some help for mapping one bmw button that does not work on Android 7.1
mnikitas said:
Does anyone know the Autoplay Android app developer? We need some help for mapping one bmw button that does not work on Android 7.1
Click to expand...
Click to collapse
The original adaptor appears to be made by Carlinke. They have a website of the same name - you should start there (sorry, I can't post external links yet).
I had to buy a USB splitter to get my CarPlay dongle to work reliably. A single USB port just wasn’t enough.
Now in the cold time of the year I have a problem with the dongle. The dongle is not connect over the usb to the android device. The app says that I have to connect the box. Is this normal? - After some time of driving it is working.
Now it is the problem that I have to restart my device to get the box recognized by the app. Did someone have some suggestions?
yfain said:
They told me that everything worked fine at their devices. I bought it at a german reseller. Is it possible to get in touch with the creator?
I attached a photo of my versions. Maybe you have some ideas?
Click to expand...
Click to collapse
looks like you have the carlinkit dongle like mine, you may need to update firmware on box. I got the latest box firmware from alliexpress selleer ( as per time of this post )
install instuctions
1) format a USB drive as FAT32
2) place img file in root of USB
3) plug dongle into andorid unit ( do not put in USB yet )
4) open app
5) once app asks you to connect phone, plug in USB drive into dongle.
6) you will get message on app saying box updating.
7 ) finally check setting menu in APP to see box and software up to date ( you will need to be connected to WIFI for this I belive)
Thanks for your post.
Is it right that the latest version of app and dongle is from the end of december 2018?
I have the same box on a px5 android 6 and it keeps restarting/disconnecting when I use a navigation app like google maps. I tried using 2 usb ports for extra charge, different phone, cable, etc.
nothing works
Yes, for me it is the same.
I think there is also no update available since 4 months. I do not know why.
usb splitter
mitchello said:
I had to buy a USB splitter to get my CarPlay dongle to work reliably. A single USB port just wasn’t enough.
Click to expand...
Click to collapse
hey, so following the forum I found your post about the y splitter I purchased the splitter online my question now is what do I hook up on the female side and what exactly on the male sides?? also what if my android screen has only one USB output??
Soo, i've got a used P40 Pro, and I discovery the OTG is not working and the reverse wireless charger dont work too.
It have version 11.0.0.260
I know the previous owner use to have Google services on it, but when we sold me the phone, he performe the hard resert on it (mayba thats the probeme)
The phone have no google services, and I want to downgrade, but I need to fix the OTG probleme first.
How I can solve it?
Post screenshot of last screen of version info from ProjectMenu.
Details at no. 5 : here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
badmania98 said:
Post screenshot of last screen of version info from ProjectMenu.
Details at no. 5 : here.
Click to expand...
Click to collapse
Also:
Post screenshot of USB Port Settings from ProjectMenu.
Details at no. 6 : here.
badmania98 said:
Also:
Post screenshot of USB Port Settings from ProjectMenu.
Details at no. 6 : here.
Click to expand...
Click to collapse
Can you transfer a file from computer to phone using USB-C cable? Do you have fast charge when connect the phone to charger?
If the answer is yes, you have a problem with pen-drive (must be formatted NTFS) or USB-C OTG adaptor.
I did format my pen drive to FAT32 like huawei told to do in their website oO, but my samsung phones can see the otg and the flash drive. I did try 3 flash drives and 2 OTG
I dont know if is really a fast charger 40W , how I can distinguish?
Yes I did connect OTG - > UBS UBS to my Pc, and it opens the huawei software
badmania98 said:
Can you transfer a file from computer to phone using USB-C cable? Do you have fast charge when connect the phone to charger?
If the answer is yes, you have a problem with pen-drive (must be formatted NTFS) or USB-C OTG adaptor.
Click to expand...
Click to collapse
Eclipsados said:
I did format my pen drive to FAT32 like huawei told to do in their website oO, but my samsung phones can see the otg and the flash drive. I did try 3 flash drives and 2 OTG
I dont know if is really a fast charger 40W , how I can distinguish?
Yes I did connect OTG - > UBS UBS to my Pc, and it opens the huawei software
Click to expand...
Click to collapse
I already told you: format the pendrive in NTFS.
@badmania98 how about reverse wireless charger?
I will
badmania98 said:
I already told you: format the pendrive in NTFS.
Click to expand...
Click to collapse
Eclipsados said:
I will
Click to expand...
Click to collapse
You will find all you need on my thread. Start with first message here..
Man, you should have a button linking to you paypal with a ref Pay me a beer , I did it in my old profile here
I'm a old member of XDA but I left since i got my time occupied
EclipseX
forum.xda-developers.com
badmania98 said:
You will find all you need on my thread. Start with first message here..
Click to expand...
Click to collapse
Eclipsados said:
Man, you should have a button linking to you paypal with a ref Pay me a beer , I did it in my old profile here
I'm a old member of XDA but I left since i got my time occupied
EclipseX
forum.xda-developers.com
Click to expand...
Click to collapse
It is that link, on my signature. It is up to how you see the forum. On Desktop you will see it. I received just once.
Eclipsados said:
@badmania98 how about reverse wireless charger?
Click to expand...
Click to collapse
First activate from battery menu. Then avoid to use the case. And put your watch on the back of the phone (near camera). Move it slowly on the back.
I really did not saw in my phone xD, but I remember that XDA let us to put down to our avatar picture and now no :O, xda change alot, for real
badmania98 said:
It is that link, on my signature. It is up to how you see the forum. On Desktop you will see it. I received just once.
View attachment 5499051
Click to expand...
Click to collapse
I did it, it shows activated but nothing happens....and I did try with other phones too =/
badmania98 said:
First activate from battery menu. Then avoid to use the case. And put your watch on the back of the phone (near camera). Move it slowly on the back.
Click to expand...
Click to collapse
Eclipsados said:
I did it, it shows activated but nothing happens....and I did try with other phones too =/
Click to expand...
Click to collapse
Maybe your (other) device is not compatible with this kind of charging, and it uses just its charger (wireless).
See my P40 Pro + GT 2 Pro. It is not so cool. I don't use this.
Your browser is not able to display this video.
@badmania98
badmania98
soo I did my tests now. 2 usb pens formated with NTFS....still nothing. Test 2 pens in 2 OTGs and still nothing.
Both my samsung still recognizes the otgs ans pen drives
And yes, usbc to pc I can do file transfer.witch otg is compatible....
Any way I think I will recall huawei service
@badmania98 anyway to roolback to instal gsm without otg? maybe it fixes otg