Database Info

[ROM] ANIMUS 1.1.9 for samsung galaxy w

Finally, after several tests, experiments, and cursing the Rom ANIMUS 1.1.9 and ready
the rom does not want to be the best rom around for our device
ANIMUS was created to give everyone the chance to cook their own rom modding and staff.
the basis of the Rom is 2.3.6 I think the most powerful device for our
Roma is a technically stocks, but lighter, eco additions:
Android 2.3.6 (Gingerbread)
zipalign
Busy box
deodex
enabled bash
app2sd enabled
The ROM is significantly lighter than the basic
installation
1.Download the rom
2.mettere the file to the sd of the device
3.disconnect the device from the PC and turn it off
4.Switch in recovery
5.nel recovery menu to wipe ALL
6.go sd card for installation in the menu and scroll to find the file of the Rom
7.lanciare the installation
8.alla end of the recovery procedure to restart the system
this is the link http://www.megaupload.com/?d=RSVBW3HS
end!
this rom with the kitchen and customizable dsixdia easily ...
tell you guys .. a small step was taken to work. good luck to all the dev!
I do not assume any liability you do so at your own risk
thanks:
scupinatos for availability and kindness
morfes for advice and pazienzaaaaa
qzem ready for answers to any time of night and day
Raidzero for the recovery that has allowed us to get this far
Enjoy
Sorry for my bad English

have you benchmark it?

gymnastiar said:
have you benchmark it?
Click to expand...
Click to collapse
Off course! Personally tested

can u upload the screen shot plizzz . . .

mine got lag when rebooting the phone ...
ut stuck at samsung galaxy wonder while booting
and now got boot looping

Can you upload some screenshot please??..Thank a lot..

Can you reach the Download Mode ?
Hi,
can you still get into the download mode ?
Download-Mode
While switched off, keep pressing the following buttons. Release the Power-Button as soon as the SGW is switched on.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If possible and you are not able to get this fixed, I can provide you an instruction how to flash a firmware(not the custom firmware) via ODIN.
From which area are you from(country)?
greets
THE-E

THE-E said:
Hi,
can you still get into the download mode ?
Download-Mode
While switched off, keep pressing the following buttons. Release the Power-Button as soon as the SGW is switched on.
If possible and you are not able to get this fixed, I can provide you an instruction how to flash a firmware(not the custom firmware) via ODIN.
From which area are you from(country)?
greets
THE-E
Click to expand...
Click to collapse
i can reach the download mode ..
tell me how then.

jayidoans said:
i can reach the download mode ..
tell me how then.
Click to expand...
Click to collapse
First I need to know from where you are, because there are different firmwares. Or are you anyway going to flash the custom firmware again ?

THE-E said:
First I need to know from where you are, because there are different firmwares. Or are you going to flash anyway the custom firmware again ?
Click to expand...
Click to collapse
i'm from indonesia ..
if possible i want to try this custom ROM .

jayidoans said:
i'm from indonesia ..
if possible i want to try this custom' ROM .
Click to expand...
Click to collapse
THIS IS THE EUROPEAN FIRMWARE, there is also a asian one but I don't have the time to search for it now. But because you are flashing later anyway the custom firmware this shouldn't make a difference.
Instruction
1. Go into the Download mode as instructed on top. As soon as the screen with the exclamation mark appears hit the Volume up-button. Now you should be in the download mode Connect your device to the Computer.
2. Download this file https://rapidshare.com/files/2528654376/Samsung_Galaxy_W_I8150XXKK1__EUR_.rar
and extract all the files.
3. Open Odin Multi Downloader v4.43.exe .
4. click on the OPS-Button and select die Ancora.ops file.
5. Set up the settings as followed:
mark the option: One Package, Protect OPS
unmark the option: Auto Reboot, Reset Time (Sec)
6.Click on the One Package-Button and select the downloaded MD5-file.
7. Click on the Start-Button. Flashing takes around 10-15 minutes. and the first start up takes up to 5 min., so please don't panic.
I DO NOT TAKE ANY RESPONSIBILITY FOR ANY DAMAGE !!! YOUR OWN RISK !!!
Good luck and good night, it is 3:30AM in Germany ^^.

THE-E said:
THIS IS THE EUROPEAN FIRMWARE, there is also a asian one but I don't have the time to search for it now. But because you are flashing later anyway the custom firmware this shouldn't make a difference.
Instruction
1. Go into the Download mode as instructed on top. As soon as the screen with the exclamation mark appears hit the Volume up-button. Now you should be in the download mode Connect your device to the Computer.
2. Download this file https://rapidshare.com/files/2528654376/Samsung_Galaxy_W_I8150XXKK1__EUR_.rar
and extract all the files.
3. Open Odin Multi Downloader v4.43.exe .
4. click on the OPS-Button and select die Ancora.ops file.
5. Set up the settings as followed:
mark the option: One Package, Protect OPS
unmark the option: Auto Reboot, Reset Time (Sec)
6.Click on the One Package-Button and select the downloaded MD5-file.
7. Click on the Start-Button. Flashing takes around 10-15 minutes. and the first start up takes up to 5 min., so please don't panic.
I DO NOT TAKE ANY RESPONSIBILITY FOR ANY DAMAGE !!! YOUR OWN RISK !!!
Good luck and good night, it is 3:30AM in Germany ^^.
Click to expand...
Click to collapse
thanks for your response bro
anyway, is there any download site that's not limiting download speed ?
like mediafire or something ?

any screenshot of this custom rom?

jayidoans said:
mine got lag when rebooting the phone ...
ut stuck at samsung galaxy wonder while booting
and now got boot looping
Click to expand...
Click to collapse
Have you wiped everything before flashing? You should if you haven't.

qzem said:
Have you wiped everything before flashing? You should if you haven't.
Click to expand...
Click to collapse
I had ..
Wipe all + another wipe before doing the update from SD card ..
and the result is Boot Looping.
now i'm trying to flash to stock ROM .

guys I did not put any screenshots just because it's identical to the stock rom

for jayidoans I did it based on this rom Android 2.3.6 European versiione of this device
I do not know if your problem is due to the fact that you have a device with a firmware Asia
but I assure you that Rom and works I tested myself personally.

snake873 said:
for jayidoans I did it based on this rom Android 2.3.6 European versiione of this device
I do not know if your problem is due to the fact that you have a device with a firmware Asia
but I assure you that Rom and works I tested myself personally.
Click to expand...
Click to collapse
i think that there is no difference between euro or asia rom .
but i cant install your custom ROM,
as i said before, it stuck at boot looping
and anyway, for App2SD mods,
should i have a microSD card installed ? and should i format it as ntfs and ext3 ?

how much the quadrant score for this rom?..My stock rom only get 1199.

lvoonjian8888 said:
how much the quadrant score for this rom?..My stock rom only get 1199.
Click to expand...
Click to collapse
You do know that Quadrant scores mean nothing right?
As Chainfire once said: "However, if you put any trust in Quadrant scores you could use them to prove that dancing naked for 5 minutes in your garden affects device performance."

[RECOVERY] TWRP 2.8.6.1 for D80130b

Hey guys,
Using a guide for the g3 by @topet2k12001 i was able to get permanent recovery working for our d801's running the new 30b Lollipop. I compiled the necessary files into a flashable zip for you all. The zip contains bump'd lollipop boot.img, kk aboot.img, and twrp 2.8.6.1 recovery.
as always... FLASH AT YOUR OWN RISK
Prerequisites:
- Running Stock D80130b
- Rooted
- Autorec installed
Getting Started:
- Copy TWRP-2.8.6.1_D80130b.zip to your phones storage
- Run Autorec and flash TWRP (2.7)
- Reboot to recovery
- Flash TWRP-2.8.6.1_D80130b.zip
- Enjoy!
You should now have a permanent recovery.
DOWNLOAD:
Twrp for d80130b:
https://mega.co.nz/#!qFUDWC4a!nHj3R-gPAEqvZ-yLcQMZxXvTN8eFJg99vWfopnCjR_w
Stock d80130b bootstack + recovery: (flashes stock recovery in case anything goes wrong)
https://mega.co.nz/#!KI9k1YxT!HDJEDSd0X1MEsdr5oiNdutg0aADuqB3A1XrNQUjsqrQ
Credits to @blastagator for the Recovery and @Cloudyfa for Autorec

Great work man...i had a feeling you would bring us a working fix

Was going to try this and got this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

nalanotae said:
Was going to try this and got thisView attachment 3241785
Click to expand...
Click to collapse
If i remember correctly, that means you are not currently rooted - or Autorec doesnt have root permissions

Done!..you're awesome man. By the way, my lollipop charges so slowly like in 4-5 hours. Any help you can offer me?

Thanks very much!! Works great
Sent from my LG-D801 using XDA Free mobile app

snowlin said:
If i remember correctly, that means you are not currently rooted - or Autorec doesnt have root permissions
Click to expand...
Click to collapse
I am rooted and autorec had been granted root permisions........... I may try a fresh install of everything and start over tonight after work...... Thanks for your response

Messip3 said:
Done!..you're awesome man. By the way, my lollipop charges so slowly like in 4-5 hours. Any help you can offer me?
Click to expand...
Click to collapse
Just let it cycle a few days. It will improve.
Same happened for me with 30a and 30b. Of anything i reccomend using "amplify" xposed module.

nalanotae said:
I am rooted and autorec had been granted root permisions........... I may try a fresh install of everything and start over tonight after work...... Thanks for your response
Click to expand...
Click to collapse
maybe you need busybox?
I had that problem once but it was in the middle of me re-flashing the kdz a bunch of times and it didn't happen again. Start fresh if you can
KDZ > Root > Recovery

Great work man!
I knew when I saw you working on it in the other thread that you'd find something!
May I ask what you did to fix this?

snowlin said:
Just let it cycle a few days. It will improve.
Same happened for me with 30a and 30b. Of anything i reccomend using "amplify" xposed module.
Click to expand...
Click to collapse
Alright man...thank you.

mjoecarroll said:
Great work man!
I knew when I saw you working on it in the other thread that you'd find something!
May I ask what you did to fix this?
Click to expand...
Click to collapse
I pulled the aboot.img and laf.img from 20e , bumped the stock lollipop boot.img using a guide i found in the g3 forums and packaged it with twrp 2.8.6.1.
I'm not super experienced or anything but this kind of stuff interests me so i learn as i go

That's pretty awesome. I was gonna try something similar, but I was afraid I was gonna brick my phone... I didn't think about bumping the boot.img at all, that was smart haha.

mjoecarroll said:
That's pretty awesome. I was gonna try something similar, but I was afraid I was gonna brick my phone... I didn't think about bumping the boot.img at all, that was smart haha.
Click to expand...
Click to collapse
It took me a ton of trial and error haha, luckily i had the stock recovery already zip'd so if anything went wrong i could usually just flash that in order to be able to boot again and start over.

snowlin said:
It took me a ton of trial and error haha, luckily i had the stock recovery already zip'd so if anything went wrong i could usually just flash that in order to be able to boot again and start over.
Click to expand...
Click to collapse
Worked just great, thanks a million.

snowlin said:
maybe you need busybox?
I had that problem once but it was in the middle of me re-flashing the kdz a bunch of times and it didn't happen again. Start fresh if you can
KDZ > Root > Recovery
Click to expand...
Click to collapse
That was my plan....... When i first flashed this rom i had no problem with installing autorec but then i got the security error.. So i just flashed kdz then rooted and set the phone up...... Can't wait to get all this going.... Really untested to see how sins if these custom roms run with new radio

Screen goes crazy when recovery tries to dim screen...looks like back when lgd jdi screen issues used to be a problem

jamesd1085 said:
Screen goes crazy when recovery tries to dim screen...looks like back when lgd jdi screen issues used to be a problem
Click to expand...
Click to collapse
hmmm i'm not experiencing this at all, i included the panelfix script from the twrp package too. perhaps its not running correctly.
anyone else having this problem?

snowlin said:
hmmm i'm not experiencing this at all, i included the panelfix script from the twrp package too. perhaps its not running correctly.
anyone else having this problem?
Click to expand...
Click to collapse
So far it happened twice while i was testing...while attemting to back up it did it but was fine as long as i kept screen active...also on restore same issue...if no one else has issue then idk

jamesd1085 said:
So far it happened twice while i was testing...while attemting to back up it did it but was fine as long as i kept screen active...also on restore same issue...if no one else has issue then idk
Click to expand...
Click to collapse
maybe try flashing blastagators twrp package for the 801 : http://blastagator.ddns.net/twrp/2-8-6-1.php
even though this is what i used in mine anyways, it's worth a shot. You will still be able to boot after flashing this since it is only recovery.

Deleted OS

Hey guys hope you can help with my oneplus 7 pro. So I did not backup before rooting the device, however, I was able to successfully root it. The problem arose when I wanted to take the twrp official 3.3.1-2 and upgraded to 3.3.1-29 version. I flashed it on the system image in the twrp setting, but it ended up writing over OS. Now there is no OS on the oneplus 7 pro. Do you guys have a suggestion into how I can fix this problem? and bring it back into the rooted phone. I also was hoping if you guys know anyway to lock the twrp with a password in the future? thank you

1] Your TWRP should already have had a pin if you had set a pin (same one) when using the rom
2] Can you still boot into TWRP as recovery? If so then go grab the latest 9.5.7 :
Official : https://otafsg1.h2os.com/patch/amaz...ygen_21.E.11_OTA_011_all_1906040003_25c96.zip
My mirror on AFH : https://www.androidfilehost.com/?fid=6006931924117889610
You should be able to flash it using TWRP if you've not messed up too badly, then you may be back to default rom and can start again.
If you get that far then read the guide on the @mauronofrio TWRP properly and flash everything again. I've also uploaded a rooted 9.5.7 boot image here if you want to try that way instead :
https://forum.xda-developers.com/showpost.php?p=79678478&postcount=522
If the worst comes to the worst then you may be able to boot into fastboot then run :
fastboot boot twrp-3.3.1-29-guacamole.img
Boot into TWRP and try sideloading the whole 9.5.7 rom instead

18os13 said:
Hey guys hope you can help with my oneplus 7 pro. So I did not backup before rooting the device, however, I was able to successfully root it. The problem arose when I wanted to take the twrp official 3.3.1-2 and upgraded to 3.3.1-29 version. I flashed it on the system image in the twrp setting, but it ended up writing over OS. Now there is no OS on the oneplus 7 pro. Do you guys have a suggestion into how I can fix this problem? and bring it back into the rooted phone. I also was hoping if you guys know anyway to lock the twrp with a password in the future? thank you
Click to expand...
Click to collapse
You could always download one of the fastboot ROMs and flash them again. You're obviously unlocked etc so all you'd need to do is fastboot flash system system.img. just make sure it's the same version.

ok since the update I was able to get the twrp installed again, but choose a wrong option in the reboot menu, something to do with edl, now the phone turn on at all :/

I give up, apparently people just can't follow instructions.

djsubterrain said:
I give up, apparently people just can't follow instructions.
Click to expand...
Click to collapse
it was slightly before I read this post :/. Is there anything possible now or am i screwed?

18os13 said:
it was slightly before I read this post :/. Is there anything possible now or am i screwed?
Click to expand...
Click to collapse
honestly I have no idea what I just did, but everything just came back online again

18os13 said:
it was slightly before I read this post :/. Is there anything possible now or am i screwed?
Click to expand...
Click to collapse
MSM tool, guac recovery.
theres a thread in this section. It will wipe the phone.

18os13 said:
honestly I have no idea what I just did, but everything just came back online again
Click to expand...
Click to collapse
Be vewy vewy careful...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

just get out of EDL, either hold down the power button or hold - and Power for like 10 seconds until u boot out of it

Ok so I basically pressed the volume and down buttom with the power button, then the phone recovered back to the when I first got it and it got uprooted. Anyway, the whole reason I was wanted to root the phone was so that I can lock the TWRP with a password. This would only give me access to hard resetting the phone. Do any of you guys have a solution to this? its a phone for my little brother, and I want to restrict his access to the internet, but he knows how to hard reset the phone using the volume down and power. however, if I can lock the TWRP with a password he cant get around that part as easily.

18os13 said:
Ok so I basically pressed the volume and down buttom with the power button, then the phone recovered back to the when I first got it and it got uprooted. Anyway, the whole reason I was wanted to root the phone was so that I can lock the TWRP with a password. This would only give me access to hard resetting the phone. Do any of you guys have a solution to this? its a phone for my little brother, and I want to restrict his access to the internet, but he knows how to hard reset the phone using the volume down and power. however, if I can lock the TWRP with a password he cant get around that part as easily.
Click to expand...
Click to collapse
You might be able to do that with a guest account but you can't lockout TWRP with a password, it will use the pin applied to the phone. If you set it up as the default user with a pin then that's the pin that will be applied to TWRP so I would look at setting him up as a guest instead which should keep him out of TWRP too.

djsubterrain said:
You might be able to do that with a guest account but you can't lockout TWRP with a password, it will use the pin applied to the phone. If you set it up as the default user with a pin then that's the pin that will be applied to TWRP so I would look at setting him up as a guest instead which should keep him out of TWRP too.
Click to expand...
Click to collapse
perfect, thanks for the help

Question The current system is not compatible with the hardware........What's the problem?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello~
After a long time I got p11.
happy sitting at the computer
Changed to global rom.
The latest version of the current global rom is 210805 (8/27)
After installing 210805 ROM, a message is displayed like the picture.
And it turns off automatically
But if I install older version 210520(5/31)
There's nothing wrong with it! Messages like pictures are not displayed
Also, if I update from version 210520 (after all, the latest version 210805)
Also displayed like a picture
What's the problem?
Because my native language is not English
I am very sorry for the poor language
I wish you good luck in your daily life
I look forward to your kind comments
thank you

1. Flash J606F Factory rescue.
2. Flash J606F 210805 ROW.
But after these processes, I lost my serial number.

guess you are from China lol
me with the same problem.
TRY 1. Unbox, then Qfil, flash 210906, incompatible;
TRY 2. downgrade to 12.0.519 then Qfil 210121, it's ok. But the first OTA, incompatible;
now I'm staying at 12.6.084, adb delete most of the useless apps.
I don't like ZUI HOME, dare not to delete it though.

me too ((

the bad is: it's said they add some restrictions to prevent users flashing cross-region roms in ZUI 12.6.
the good: we can use Qfil to flash back to any firmware that can run normally.
Now, I'm using the latest ZUI 12.6 (cuz I'm in China), with adb having deleted most of the useless apps. And since it has the google framework, we can simply install a googleplay.apk. It runs pretty good for now.

Upppppp.

ong14 said:
1. Flash J606F Factory rescue.
2. Flash J606F 210805 ROW.
But after these processes, I lost my serial number.
Click to expand...
Click to collapse
please more elaborate.

famicom9x said:
please more elaborate.
Click to expand...
Click to collapse
1. Flash rescue mode from h*t*t*p*s*://4pda.to/pages/go/?u=https%3A%2F%2Fandroidhost.ru%2FY1n&e=103996404
2. Flash latest firmware from h*t*t*p*s*://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/TB-J606F_S120228_210906_ROW.zip
3. Done

ong14 said:
1. Flash rescue mode from h*t*t*p*s*://4pda.to/pages/go/?u=https%3A%2F%2Fandroidhost.ru%2FY1n&e=103996404
2. Flash latest firmware from h*t*t*p*s*://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/TB-J606F_S120228_210906_ROW.zip
3. Done
Click to expand...
Click to collapse
1. can i use qfil to flash rescue rom ?
2. do i need to open the rom to see it work ?
3. then i immediately flash the lastest firmware rom?
4. do i need to unlock device or something?

Just flash rescue mode via qfil as usual, then official pad11(global) or xiaoxin(Chinese) firmware.
Be warned, you may lost your serial number.

ong14 said:
Just flash rescue mode via qfil as usual, then official pad11(global) or xiaoxin(Chinese) firmware.
Be warned, you may lost your serial number.
Click to expand...
Click to collapse
is there any way to restore serial number? and now my device can't boot it lost recovery, and is stuck in bootloader mode! Can you help me!

Did you flash rescue mode? It should boot up without problem.

ong14 said:
Did you flash rescue mode? It should boot up without problem.
Click to expand...
Click to collapse
it's still the same! after flashing finished, it rebooted and entered fastboot mode.

Please post your qfil settings.

ong14 said:
Please post your qfil settings.
Click to expand...
Click to collapse
Its.

hauuet said:
Its.
View attachment 5425061
Click to expand...
Click to collapse
i've seen someone posted that you need to unlock the device to flash international rom, not sure it's true or not, still wait for someone to post a VERY DETAIL tutorial about how to do this for noob like me

famicom9x said:
i've seen someone posted that you need to unlock the device to flash international rom, not sure it's true or not, still wait for someone to post a VERY DETAIL tutorial about how to do this for noob like me
Click to expand...
Click to collapse
No need to unlock to flash Global Rom.
Only version 210520 can be used. The other versions cannot be used.
Config like me.
Sorry I use GG tranlate

hungali33 said:
No need to unlock to flash Global Rom.
Only version 510520 can be used. The other versions cannot be used.
Config like me.
Sorry I use GG tranlate
Click to expand...
Click to collapse
where can i download the old 510520 version?

whitemilk_kor said:
View attachment 5407263
Hello~
After a long time I got p11.
happy sitting at the computer
Changed to global rom.
The latest version of the current global rom is 210805 (8/27)
After installing 210805 ROM, a message is displayed like the picture.
And it turns off automatically
But if I install older version 210520(5/31)
There's nothing wrong with it! Messages like pictures are not displayed
Also, if I update from version 210520 (after all, the latest version 210805)
Also displayed like a picture
What's the problem?
Because my native language is not English
I am very sorry for the poor language
I wish you good luck in your daily life
I look forward to your kind comments
thank you
Click to expand...
Click to collapse
닉네임 보니 한국인이신것 같네요!
LMSA를 이용해서 210906 펌웨어 재설치해보시겠어요?

hungali33 said:
No need to unlock to flash Global Rom.
Only version 510520 can be used. The other versions cannot be used.
Config like me.
Sorry I use GG tranlate
Click to expand...
Click to collapse
guess you are talking about "210520". That's the only "latest" rom working on Chinese version pad.

How To Guide [CLOSED] Bypass the region check in Lenovo p12 pro 12.6(CN version)

Having had a long research after I bricked my lenovo p12 pro 12.6(the CN version) ,I thought I finally figured out what is happening when boot ROW firmware on my tablet and a method to bypass such region check. Here is detail procedure:
First of all ,you DO NOT need to return your bricked tablet back to the seller or manufactures, any of which costs time and patience.
1、Download the super partition image file Mod edit: Links removed ,and extract super.img from it using 7z x ... command.
2、You can choose to use my bash shell script (flash_stock_firmware.sh)or your manual instructions: to flash the stock firmware
Bash:
bash 'flash_stock_firmware.sh' 'PATH/TO/THE/STOCK/FIRMWARE/FOLDER'
,it takes about 5 minutes to end.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After it booted to framework ,the init process will play a bootanimation ,in my case it shows :
This is exactly what we should to remove.And now you could reboot the tablet into fastboot mode
Code:
fastboot flash super PATH/TO/EXTRACTED/SUPER/IMAGE
fastboot erase userdata
fastboot erase metadata
fastboot reboot
In my case ,my tablet successfully launches the SetupWizard for registering device to google:

Wow fantastic work? Any chance you can elaborate anymore in your instructions for the more novice users? I've not used ADB before. When I tried and the tablet was broke ADB couldn't see the tablet where as QFIL could.
Does the boot loader have to be unlocked?
I'm still waiting for mine back from china but depending on the stability of the Global ROM I may move across.
Is the above doable only with ADB or can it also be done in QFIL?
Does the Global ROM successfully OTA for you or does it fail after download? Can you search from the settings menu?
Going forward are you able to use the Lenovo Recovery Centre to flash updates Global ROM's without having to do the steps above again?

mardon85 said:
Wow fantastic work? Any chance you can elaborate anymore in your instructions for the more novice users? I've not used ADB before. When I tried and the tablet was broke ADB couldn't see the tablet where as QFIL could.
Does the boot loader have to be unlocked?
I'm still waiting for mine back from china but depending on the stability of the Global ROM I may move across.
Is the above doable only with ADB or can it also be done in QFIL?
Does the Global ROM successfully OTA for you or does it fail after download? Can you search from the settings menu?
Going forward are you able to use the Lenovo Recovery Centre to flash updates Global ROM's without having to do the steps above again?
Click to expand...
Click to collapse
Edited

ZTE AXON 7 said:
otloader
2、fastboot boot rec/recovery.img(Here you should wait for about thirty seconds before initialization completed)
3、adb push systemrw_1.32_flashable.zip /sdcard
4、Go to Install->/sdcard/ and choo
Click to expand...
Click to collapse
ZTE AXON 7 said:
Edited
Click to expand...
Click to collapse
Thanks for this. Its the info I think a lot of us have been waiting for.
Did you find the following issues with your global ROM the same as the video below @ 27:14

That is some really good news, great work!

Thanks for sharing your work. However, could you kindly make the link available without requesting permission asking to share our gmail address with you?

Thanks!

ZTE AXON 7 said:
h costs time and patience.
1、Download the super partition image file Mod edit: Link removed ,and extract super.img from it using 7z x ... command.
Click to expand...
Click to collapse
famaTV said:
Thanks for sharing your work. However, could you kindly make the link available without requesting permission asking to share our gmail address with you?
Click to expand...
Click to collapse
Download link was updated

Thanks for updating download links.
Once these changes have been updated can we simply download and flash newer ROW ROM's?
How is your device performing, any glitches?

ZTE AXON 7 said:
Download link was updated
Click to expand...
Click to collapse
Thanks … but even the other website requests mobile number or email address to download.
Too much work and privacy exposure to take. I would wait for someone else to re-upload the file to a more straight forward user friendly site.
Meanwhile, what have you changed to the super.img to make it bypass the region check? Do you have the CN full firmware file?
On the other hand, with your fix, will the tablet update firmware OTA without any issues?
Thanks again.

ZTE AXON 7 said:
EXTRAC
Click to expand...
Click to collapse
mardon85 said:
Thanks for updating download links.
Once these changes have been updated can we simply download and flash newer ROW ROM's?
How is your device performing, any glitches?
Click to expand...
Click to collapse
So far so good, all works fine ,120hz refresh rate,precision 3 pencil ,precisicion keyboard,fast charging,etc...

There is a brand new ROM out today. Are you able to flash that now? Have you tried changing the region code via a hex editor?
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com

famaTV said:
Thanks … but even the other website requests mobile number or email address to download.
Too much work and privacy exposure to take. I would wait for someone else to re-upload the file to a more straight forward user friendly site.
Meanwhile, what have you changed to the super.img to make it bypass the region check? Do you have the CN full firmware file?
On the other hand, with your fix, will the tablet update firmware OTA without any issues?
Thanks again.
Click to expand...
Click to collapse
I updated to S212017 with this super image ,no problem:

ZTE AXON 7 said:
I updated to S212017 with this super image ,no problem:
View attachment 5506983
Click to expand...
Click to collapse
Is that via QFIL or OTA and also can you check if the search box works within the settings menu.

mardon85 said:
Is that via QFIL or OTA and also can you check if the search box works within the settings menu.
Click to expand...
Click to collapse
OTA,I changed the original ota update logic from aosp.

ZTE AXON 7 said:
OTA,I changed the original ota update logic from aosp.
Click to expand...
Click to collapse
Wow it seems you've cracked it even better than the Ali Express sellers. Most of the reports are that it can't OTA and the issue with the Settings search bar.
If mine ever clears Chinese customs (been stick there for 12days now) I'll get mine back and be able to play.

Ok I'm looking at your instructions.
The flashing of the stock firmware is the easy bit.
Once you do that you get the not compatible message as per your original instructions.
At this point the tablet is stuck in a screen similar to below. It does not matter which option you chose the tablet will reset back to the same screen.
What exactly do you do from this point to flash these instructions and your Super Image.
fastboot flash super PATH/TO/EXTRACTED/SUPER/IMAGE
fastboot erase userdata
fastboot erase metadata
fastboot reboot
If I try and run abd I get the following:
Sorry these are probably a no brainer with your capabilities but this is all quite new to me.
Basically I can see the tablet when Android is up and running but not from fastboot mode?

mardon85 said:
Ok I'm looking at your instructions.
The flashing of the stock firmware is the easy bit.
Once you do that you get the not compatible message as per your original instructions.
At this point the tablet is stuck in a screen similar to below. It does not matter which option you chose the tablet will reset back to the same screen.
View attachment 5507019
What exactly do you do from this point to flash these instructions and your Super Image.
fastboot flash super PATH/TO/EXTRACTED/SUPER/IMAGE
fastboot erase userdata
fastboot erase metadata
fastboot reboot
If I try and run abd I get the following:
View attachment 5507027
Sorry these are probably a no brainer with your capabilities but this is all quite new to me.
Basically I can see the tablet when Android is up and running but not from fastboot mode?
Click to expand...
Click to collapse
UPDATE... Fast boot commands do actually work. Even though it wont list devices commands like reboot work fine.
Did you have to unlock your bootloader for this? Have you kept widevine L1?

@ZTE AXON 7 you seem to be using Linux like me, mostly. I've used QFIL to flash the ROW ROMs but never did it from Linux. Do you have instructions on how to do that?
Oh wait, I reread your post. That script is for flashing the stock ROM, just like you said. Sorry about that.

Thank you for your work
I don't understand this very well. Do you have detailed operation steps?