Database Info

[ROM] ANIMUS 1.1.9 for samsung galaxy w

Finally, after several tests, experiments, and cursing the Rom ANIMUS 1.1.9 and ready
the rom does not want to be the best rom around for our device
ANIMUS was created to give everyone the chance to cook their own rom modding and staff.
the basis of the Rom is 2.3.6 I think the most powerful device for our
Roma is a technically stocks, but lighter, eco additions:
Android 2.3.6 (Gingerbread)
zipalign
Busy box
deodex
enabled bash
app2sd enabled
The ROM is significantly lighter than the basic
installation
1.Download the rom
2.mettere the file to the sd of the device
3.disconnect the device from the PC and turn it off
4.Switch in recovery
5.nel recovery menu to wipe ALL
6.go sd card for installation in the menu and scroll to find the file of the Rom
7.lanciare the installation
8.alla end of the recovery procedure to restart the system
this is the link http://www.megaupload.com/?d=RSVBW3HS
end!
this rom with the kitchen and customizable dsixdia easily ...
tell you guys .. a small step was taken to work. good luck to all the dev!
I do not assume any liability you do so at your own risk
thanks:
scupinatos for availability and kindness
morfes for advice and pazienzaaaaa
qzem ready for answers to any time of night and day
Raidzero for the recovery that has allowed us to get this far
Enjoy
Sorry for my bad English

have you benchmark it?

gymnastiar said:
have you benchmark it?
Click to expand...
Click to collapse
Off course! Personally tested

can u upload the screen shot plizzz . . .

mine got lag when rebooting the phone ...
ut stuck at samsung galaxy wonder while booting
and now got boot looping

Can you upload some screenshot please??..Thank a lot..

Can you reach the Download Mode ?
Hi,
can you still get into the download mode ?
Download-Mode
While switched off, keep pressing the following buttons. Release the Power-Button as soon as the SGW is switched on.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If possible and you are not able to get this fixed, I can provide you an instruction how to flash a firmware(not the custom firmware) via ODIN.
From which area are you from(country)?
greets
THE-E

THE-E said:
Hi,
can you still get into the download mode ?
Download-Mode
While switched off, keep pressing the following buttons. Release the Power-Button as soon as the SGW is switched on.
If possible and you are not able to get this fixed, I can provide you an instruction how to flash a firmware(not the custom firmware) via ODIN.
From which area are you from(country)?
greets
THE-E
Click to expand...
Click to collapse
i can reach the download mode ..
tell me how then.

jayidoans said:
i can reach the download mode ..
tell me how then.
Click to expand...
Click to collapse
First I need to know from where you are, because there are different firmwares. Or are you anyway going to flash the custom firmware again ?

THE-E said:
First I need to know from where you are, because there are different firmwares. Or are you going to flash anyway the custom firmware again ?
Click to expand...
Click to collapse
i'm from indonesia ..
if possible i want to try this custom ROM .

jayidoans said:
i'm from indonesia ..
if possible i want to try this custom' ROM .
Click to expand...
Click to collapse
THIS IS THE EUROPEAN FIRMWARE, there is also a asian one but I don't have the time to search for it now. But because you are flashing later anyway the custom firmware this shouldn't make a difference.
Instruction
1. Go into the Download mode as instructed on top. As soon as the screen with the exclamation mark appears hit the Volume up-button. Now you should be in the download mode Connect your device to the Computer.
2. Download this file https://rapidshare.com/files/2528654376/Samsung_Galaxy_W_I8150XXKK1__EUR_.rar
and extract all the files.
3. Open Odin Multi Downloader v4.43.exe .
4. click on the OPS-Button and select die Ancora.ops file.
5. Set up the settings as followed:
mark the option: One Package, Protect OPS
unmark the option: Auto Reboot, Reset Time (Sec)
6.Click on the One Package-Button and select the downloaded MD5-file.
7. Click on the Start-Button. Flashing takes around 10-15 minutes. and the first start up takes up to 5 min., so please don't panic.
I DO NOT TAKE ANY RESPONSIBILITY FOR ANY DAMAGE !!! YOUR OWN RISK !!!
Good luck and good night, it is 3:30AM in Germany ^^.

THE-E said:
THIS IS THE EUROPEAN FIRMWARE, there is also a asian one but I don't have the time to search for it now. But because you are flashing later anyway the custom firmware this shouldn't make a difference.
Instruction
1. Go into the Download mode as instructed on top. As soon as the screen with the exclamation mark appears hit the Volume up-button. Now you should be in the download mode Connect your device to the Computer.
2. Download this file https://rapidshare.com/files/2528654376/Samsung_Galaxy_W_I8150XXKK1__EUR_.rar
and extract all the files.
3. Open Odin Multi Downloader v4.43.exe .
4. click on the OPS-Button and select die Ancora.ops file.
5. Set up the settings as followed:
mark the option: One Package, Protect OPS
unmark the option: Auto Reboot, Reset Time (Sec)
6.Click on the One Package-Button and select the downloaded MD5-file.
7. Click on the Start-Button. Flashing takes around 10-15 minutes. and the first start up takes up to 5 min., so please don't panic.
I DO NOT TAKE ANY RESPONSIBILITY FOR ANY DAMAGE !!! YOUR OWN RISK !!!
Good luck and good night, it is 3:30AM in Germany ^^.
Click to expand...
Click to collapse
thanks for your response bro
anyway, is there any download site that's not limiting download speed ?
like mediafire or something ?

any screenshot of this custom rom?

jayidoans said:
mine got lag when rebooting the phone ...
ut stuck at samsung galaxy wonder while booting
and now got boot looping
Click to expand...
Click to collapse
Have you wiped everything before flashing? You should if you haven't.

qzem said:
Have you wiped everything before flashing? You should if you haven't.
Click to expand...
Click to collapse
I had ..
Wipe all + another wipe before doing the update from SD card ..
and the result is Boot Looping.
now i'm trying to flash to stock ROM .

guys I did not put any screenshots just because it's identical to the stock rom

for jayidoans I did it based on this rom Android 2.3.6 European versiione of this device
I do not know if your problem is due to the fact that you have a device with a firmware Asia
but I assure you that Rom and works I tested myself personally.

snake873 said:
for jayidoans I did it based on this rom Android 2.3.6 European versiione of this device
I do not know if your problem is due to the fact that you have a device with a firmware Asia
but I assure you that Rom and works I tested myself personally.
Click to expand...
Click to collapse
i think that there is no difference between euro or asia rom .
but i cant install your custom ROM,
as i said before, it stuck at boot looping
and anyway, for App2SD mods,
should i have a microSD card installed ? and should i format it as ntfs and ext3 ?

how much the quadrant score for this rom?..My stock rom only get 1199.

lvoonjian8888 said:
how much the quadrant score for this rom?..My stock rom only get 1199.
Click to expand...
Click to collapse
You do know that Quadrant scores mean nothing right?
As Chainfire once said: "However, if you put any trust in Quadrant scores you could use them to prove that dancing naked for 5 minutes in your garden affects device performance."

S6 Bootloader and Modem Odin Flash Failed Red

Greetings, this might be a better place to post this. Up till now my roots have been ok and bootloader and modems are ok. But recently (yesterday) i wanted to use Xtresolite Rom again and wanted to update to newest recommend BL and Modem, however im getting a fail. I already tried a new computer so its not that. I never had this issue before and its a bit concerning.
The phone works ok, but i can no longer update the BL and Modem on it.... any ideas on how to get around this ? Reset it or something like that ? I have read that a possible complete FORMAT might fix it, but does that mean it removes everything on the phone including SDcard storage files or just the mainphone files ? Here is a screenshot of what i get in Odin, would really appreciate some help.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

agentdangermouse said:
Greetings, this might be a better place to post this. Up till now my roots have been ok and bootloader and modems are ok. But recently (yesterday) i wanted to use Xtresolite Rom again and wanted to update to newest recommend BL and Modem, however im getting a fail. I already tried a new computer so its not that. I never had this issue before and its a bit concerning.
The phone works ok, but i can no longer update the BL and Modem on it.... any ideas on how to get around this ? Reset it or something like that ? I have read that a possible complete FORMAT might fix it, but does that mean it removes everything on the phone including SDcard storage files or just the mainphone files ? Here is a screenshot of what i get in Odin, would really appreciate some help.
Click to expand...
Click to collapse
you phone g920i?

agentdangermouse said:
Greetings, this might be a better place to post this. Up till now my roots have been ok and bootloader and modems are ok. But recently (yesterday) i wanted to use Xtresolite Rom again and wanted to update to newest recommend BL and Modem, however im getting a fail. I already tried a new computer so its not that. I never had this issue before and its a bit concerning.
The phone works ok, but i can no longer update the BL and Modem on it.... any ideas on how to get around this ? Reset it or something like that ? I have read that a possible complete FORMAT might fix it, but does that mean it removes everything on the phone including SDcard storage files or just the mainphone files ? Here is a screenshot of what i get in Odin, would really appreciate some help.
Click to expand...
Click to collapse
If you previously firmware (OI9 and new) had it, you can return to the boot loader only to release OI9.
Older bootloader cause an error.

furkanndk said:
you phone g920i?
Click to expand...
Click to collapse
Yeah sorry i mentioned its Samsung SM-G920i

bininga59 said:
If you previously firmware (OI9 and new) had it, you can return to the boot loader only to release OI9.
Older bootloader cause an error.
Click to expand...
Click to collapse
I never had I09, pretty sure previous to this i had one B0F or something like that. What is the latest for Samsung 920i that i can try ?

agentdangermouse said:
I never had I09, pretty sure previous to this i had one B0F or something like that. What is the latest for Samsung 920i that i can try ?
Click to expand...
Click to collapse
Actually issue is resolved, i installed Samsung Phone Info from app store and i double checked my bootloader and modem installed i am already running latest bootloader from here http://forum.xda-developers.com/galaxy-s6/development/g920i-bootloader-modem-updated-10-10-t3221796
So i guess the fact is i cannot downgrade maybe thats why this is the issue. So i think all is ok
Thanks for the assistance

S7 G930T HARD BRICKED qualcomm hs-usb qdloader 9008

Hello everybody!
My S7 is hard bricked after me restore it by Odin
I have tried in many ways but not sucess!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm happy when you care my threads.

Did you verified your Usb drivers, or tried a different port oj your computer? Try unistalling drivers completely and try again

atrix_noob said:
Did you verified your Usb drivers, or tried a different port oj your computer? Try unistalling drivers completely and try again
Click to expand...
Click to collapse
I tried, but it not work!

Hiep2409 said:
Hello everybody!
My S7 is hard bricked after me restore it by Odin
I have tried in many ways but not sucess!
I'm happy when you care my threads.
Click to expand...
Click to collapse
What files did you use to restore from odin? What version was you phone on and what versi9n was the firmware you flashed? Also where did you download it from? (Check for the obvious, like deleting drivers and installing the correct ones or just reinstalling them. Or just use a different computer) Let us know as much as you do, so we can help you out

Looks to me like you have A LOT of driver compatibility issues on your computer. I see some that have to do with HTC.. Do you have an HTC phone as well?
Try these steps:
1. In device Manager, double click on one of the devices with the exclamation mark
2. Click on the "Details" tab
3. Under the "Property" drop down, look for "Hardware Ids" and click on it
Highlight the first thing you see under "Value" right click on it and copy it.
Mine says: USB\VID_04E8&PID_6860&REV_0400
And it's for the SAMSUNG Mobile USB Composite Device
4. Try googling that value. You should find compatible drivers for it.
I'm attaching the USB drivers I'm using.
Hope this helps.

my question is why are you flashing your S7 with tools other than Odin? those tools are not meant to flash the S7

micallan_17 said:
my question is why are you flashing your S7 with tools other than Odin? those tools are not meant to flash the S7
Click to expand...
Click to collapse
As i can see you did not read the first post!
"My S7 is hard bricked after me restore it by Odin"
Basically this means: flash memory is not good for booting divice, so it stays in Qualcomm's Snapdragon USB serial bootloader/flash mode.
These are qualcomm tools.
Grow up!

PadsPCB said:
As i can see you did not read the first post!
"My S7 is hard bricked after me restore it by Odin"
Basically this means: flash memory is not good for booting divice, so it stays in Qualcomm's Snapdragon USB serial bootloader/flash mode.
These are qualcomm tools.
Grow up!
Click to expand...
Click to collapse
Without an unlocked bootloader, it's nearly impossible to brick our S7 unless you try super hard to do so. Instead of getting snappy with people here, giving us information would help.
Can you put the phone into download mode? (power off, hold vol down, home, power until a blue screen appears, then press vol up)
What exactly did you flash with Odin?
Was the flash interrupted? can you provide a log?
Whatever you did to your phone, YOU did it. So dont come here, ask for help, and then tell the people trying to help to "Grow up".

I am having the same issue, except I didn't do anything wrong with Odin, I was a just reflashing, and it broke. How can I fix this?

If you can link the xml files, i can try from my end

anyone fix this have the same issue with a s8 +

[email protected] said:
anyone fix this have the same issue with a s8 +
Click to expand...
Click to collapse
My recommendation is to go on the s8/s8+ forums, hopefully someone had the same issue and resolved it there...

unbrick hardbricked
hi,guys i'm new at this but i found this files on the web that works for me like a charm no configuration needed only double click on file recover.bat and buala.
https:// mega.nz/ #!UyQ11ZIA

Can i have the password for the file
PLZ

carlitossatan said:
hi,guys i'm new at this but i found this files on the web that works for me like a charm no configuration needed only double click on file recover.bat and buala.
https:// mega.nz/ #!UyQ11ZIA
Click to expand...
Click to collapse
decryption key PLEASE

I want this file, too
---------- Post added at 03:56 AM ---------- Previous post was at 03:50 AM ----------
My S7 edge has also become brick. Can you send repair methods and tool files to my Google mail? Thank you!([email protected])

Guys, OP posted 6 months ago and has not posted again since, unlikely they will post the file now

Im on it...
*Detection* said:
Guys, OP posted 6 months ago and has not posted again since, unlikely they will post the file now
Click to expand...
Click to collapse

Here File without password work only with old binary Like 4 But New Binary Not work I have G930V Bricked After Flash Downgrade Companion file From 8.0 I hope any one can share or make file with new binary
G930XU5
https://mega.nz/#!6NEz2I7Q!df-ITxjS0w7YZJmn1_dSoqil7KWgzYmuvLNss-qTePg
G935XU5
https://mega.nz/#!GIkh0DQD!mKb2vR6p6ivYKofhFXl9iT7DAkIg04qn-Nk32VuTHqk

g955u bit5
gonnaneedaburnheal said:
If you can link the xml files, i can try from my end
Click to expand...
Click to collapse
if you need g955u bit5 unbrick solution
whatsapp+2348067369016

How To Guide [CLOSED] Bypass the region check in Lenovo p12 pro 12.6(CN version)

Having had a long research after I bricked my lenovo p12 pro 12.6(the CN version) ,I thought I finally figured out what is happening when boot ROW firmware on my tablet and a method to bypass such region check. Here is detail procedure:
First of all ,you DO NOT need to return your bricked tablet back to the seller or manufactures, any of which costs time and patience.
1、Download the super partition image file Mod edit: Links removed ,and extract super.img from it using 7z x ... command.
2、You can choose to use my bash shell script (flash_stock_firmware.sh)or your manual instructions: to flash the stock firmware
Bash:
bash 'flash_stock_firmware.sh' 'PATH/TO/THE/STOCK/FIRMWARE/FOLDER'
,it takes about 5 minutes to end.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After it booted to framework ,the init process will play a bootanimation ,in my case it shows :
This is exactly what we should to remove.And now you could reboot the tablet into fastboot mode
Code:
fastboot flash super PATH/TO/EXTRACTED/SUPER/IMAGE
fastboot erase userdata
fastboot erase metadata
fastboot reboot
In my case ,my tablet successfully launches the SetupWizard for registering device to google:

Wow fantastic work? Any chance you can elaborate anymore in your instructions for the more novice users? I've not used ADB before. When I tried and the tablet was broke ADB couldn't see the tablet where as QFIL could.
Does the boot loader have to be unlocked?
I'm still waiting for mine back from china but depending on the stability of the Global ROM I may move across.
Is the above doable only with ADB or can it also be done in QFIL?
Does the Global ROM successfully OTA for you or does it fail after download? Can you search from the settings menu?
Going forward are you able to use the Lenovo Recovery Centre to flash updates Global ROM's without having to do the steps above again?

mardon85 said:
Wow fantastic work? Any chance you can elaborate anymore in your instructions for the more novice users? I've not used ADB before. When I tried and the tablet was broke ADB couldn't see the tablet where as QFIL could.
Does the boot loader have to be unlocked?
I'm still waiting for mine back from china but depending on the stability of the Global ROM I may move across.
Is the above doable only with ADB or can it also be done in QFIL?
Does the Global ROM successfully OTA for you or does it fail after download? Can you search from the settings menu?
Going forward are you able to use the Lenovo Recovery Centre to flash updates Global ROM's without having to do the steps above again?
Click to expand...
Click to collapse
Edited

ZTE AXON 7 said:
otloader
2、fastboot boot rec/recovery.img(Here you should wait for about thirty seconds before initialization completed)
3、adb push systemrw_1.32_flashable.zip /sdcard
4、Go to Install->/sdcard/ and choo
Click to expand...
Click to collapse
ZTE AXON 7 said:
Edited
Click to expand...
Click to collapse
Thanks for this. Its the info I think a lot of us have been waiting for.
Did you find the following issues with your global ROM the same as the video below @ 27:14

That is some really good news, great work!

Thanks for sharing your work. However, could you kindly make the link available without requesting permission asking to share our gmail address with you?

Thanks!

ZTE AXON 7 said:
h costs time and patience.
1、Download the super partition image file Mod edit: Link removed ,and extract super.img from it using 7z x ... command.
Click to expand...
Click to collapse
famaTV said:
Thanks for sharing your work. However, could you kindly make the link available without requesting permission asking to share our gmail address with you?
Click to expand...
Click to collapse
Download link was updated

Thanks for updating download links.
Once these changes have been updated can we simply download and flash newer ROW ROM's?
How is your device performing, any glitches?

ZTE AXON 7 said:
Download link was updated
Click to expand...
Click to collapse
Thanks … but even the other website requests mobile number or email address to download.
Too much work and privacy exposure to take. I would wait for someone else to re-upload the file to a more straight forward user friendly site.
Meanwhile, what have you changed to the super.img to make it bypass the region check? Do you have the CN full firmware file?
On the other hand, with your fix, will the tablet update firmware OTA without any issues?
Thanks again.

ZTE AXON 7 said:
EXTRAC
Click to expand...
Click to collapse
mardon85 said:
Thanks for updating download links.
Once these changes have been updated can we simply download and flash newer ROW ROM's?
How is your device performing, any glitches?
Click to expand...
Click to collapse
So far so good, all works fine ,120hz refresh rate,precision 3 pencil ,precisicion keyboard,fast charging,etc...

There is a brand new ROM out today. Are you able to flash that now? Have you tried changing the region code via a hex editor?
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com

famaTV said:
Thanks … but even the other website requests mobile number or email address to download.
Too much work and privacy exposure to take. I would wait for someone else to re-upload the file to a more straight forward user friendly site.
Meanwhile, what have you changed to the super.img to make it bypass the region check? Do you have the CN full firmware file?
On the other hand, with your fix, will the tablet update firmware OTA without any issues?
Thanks again.
Click to expand...
Click to collapse
I updated to S212017 with this super image ,no problem:

ZTE AXON 7 said:
I updated to S212017 with this super image ,no problem:
View attachment 5506983
Click to expand...
Click to collapse
Is that via QFIL or OTA and also can you check if the search box works within the settings menu.

mardon85 said:
Is that via QFIL or OTA and also can you check if the search box works within the settings menu.
Click to expand...
Click to collapse
OTA,I changed the original ota update logic from aosp.

ZTE AXON 7 said:
OTA,I changed the original ota update logic from aosp.
Click to expand...
Click to collapse
Wow it seems you've cracked it even better than the Ali Express sellers. Most of the reports are that it can't OTA and the issue with the Settings search bar.
If mine ever clears Chinese customs (been stick there for 12days now) I'll get mine back and be able to play.

Ok I'm looking at your instructions.
The flashing of the stock firmware is the easy bit.
Once you do that you get the not compatible message as per your original instructions.
At this point the tablet is stuck in a screen similar to below. It does not matter which option you chose the tablet will reset back to the same screen.
What exactly do you do from this point to flash these instructions and your Super Image.
fastboot flash super PATH/TO/EXTRACTED/SUPER/IMAGE
fastboot erase userdata
fastboot erase metadata
fastboot reboot
If I try and run abd I get the following:
Sorry these are probably a no brainer with your capabilities but this is all quite new to me.
Basically I can see the tablet when Android is up and running but not from fastboot mode?

mardon85 said:
Ok I'm looking at your instructions.
The flashing of the stock firmware is the easy bit.
Once you do that you get the not compatible message as per your original instructions.
At this point the tablet is stuck in a screen similar to below. It does not matter which option you chose the tablet will reset back to the same screen.
View attachment 5507019
What exactly do you do from this point to flash these instructions and your Super Image.
fastboot flash super PATH/TO/EXTRACTED/SUPER/IMAGE
fastboot erase userdata
fastboot erase metadata
fastboot reboot
If I try and run abd I get the following:
View attachment 5507027
Sorry these are probably a no brainer with your capabilities but this is all quite new to me.
Basically I can see the tablet when Android is up and running but not from fastboot mode?
Click to expand...
Click to collapse
UPDATE... Fast boot commands do actually work. Even though it wont list devices commands like reboot work fine.
Did you have to unlock your bootloader for this? Have you kept widevine L1?

@ZTE AXON 7 you seem to be using Linux like me, mostly. I've used QFIL to flash the ROW ROMs but never did it from Linux. Do you have instructions on how to do that?
Oh wait, I reread your post. That script is for flashing the stock ROM, just like you said. Sorry about that.

Thank you for your work
I don't understand this very well. Do you have detailed operation steps?

Help, I have a redmi 9a and after trying to downgrade a version of miui it gave it hardbrick and when flashing it in sp it gives me a status error

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

duvanlop04 said:
Click to expand...
Click to collapse
Use this sp flash tool

Rares6567 said:
Utilice esta herramienta flash sp
Click to expand...
Click to collapse
thanks I'm going to flash it to see if it lets me

duvanlop04 said:
thanks I'm going to flash it to see if it lets me
Click to expand...
Click to collapse
Did it work?

Dalzz said:
Did it work?
Click to expand...
Click to collapse
Not yet, I'm talking with him in private. Do you have the same problem, hard bricked device??

Rares6567 said:
Not yet, I'm talking with him in private. Do you have the same problem, hard bricked device??
Click to expand...
Click to collapse
Yes, I have the same problem after flashing old MIUI version.

Dalzz said:
Yes, I have the same problem after flashing old MIUI version.
Click to expand...
Click to collapse
You can flash new miui version?

Rares6567 said:
You can flash new miui version?
Click to expand...
Click to collapse
I can't right now since I dont have access to my PC

Dalzz said:
I can't right now since I dont have access to my PC
Click to expand...
Click to collapse
Ahhhh sad

why does it become hard bricked after trying to downgrade?

Download latest china rom then use sp flash v5.2020

jdd1996 said:
why does it become hard bricked after trying to downgrade?
Click to expand...
Click to collapse
I don't know but i think because when you have like data from miui 12.5 and want to downgrade to 12.0.10 your miui 12.5 data will be there and this will not work properly, and yeahh.... You can't do that if u don't format ig

i see i understand.
I have 12.5.4.0 RCDMIXM --
How can i flash a custom recovery in it ? I try flashing orange fox but it gives me a dm-verity error, and even if i get to the recovery, it gets stuck on the loading screen.

jdd1996 said:
i see i understand.
I have 12.5.4.0 RCDMIXM --
How can i flash a custom recovery in it ? I try flashing orange fox but it gives me a dm-verity error, and even if i get to the recovery, it gets stuck on the loading screen.
Click to expand...
Click to collapse
I don't think there is a orange fox version for android 11( I'm not sure) so can u try twrp. If no try flashing the vbmeta (idk)

Rares6567 said:
I don't think there is a orange fox version for android 11( I'm not sure) so can u try twrp. If no try flashing the vbmeta (idk)
Click to expand...
Click to collapse
My last stock ROM was 12.5.7 A11 based.
I tried twrp 3.4 and .5 and both work good.
In second time I flashed orange fox with success (despite android 11 not supported) and everything works fine.
However I suggest first to flash stock 12.0.10 and after.flashing OF to see working wifi and BT.

I tried flashing 12.0.10.0 and phone would never boot, i'm not very tech savvy, i ended up deleting that ROM by mistake one day. So i dont have it anymore, 4.2 gb i lost there. In regards to the custom recovery, i'll maybe try twrp, thanks
(it all sounds too risky and problematic, im not sure if i want to continue with this phone, for now i just keep it off, its so bad, i dont use it, no custom recovery, no roms, nothing, everything bugged, it gets bricked easily, xiomi cloud, xiomi login, 3 different security methods, SLA, DA, im so overwhelmed by the amount of sh!"# it has, that its just not a pleasant experience, i haven't been able to use a single custom rom, and i have downloaded around 11 GB's in files with mobile data, i haven't been able to do anything, and i have been trying to mod it for the past 2-3 months and no progress. The rest of the phones i've had just , sudo fastboot flash system <image name> and its done, simple to use recoveries, everything easy. This one is a puzzle saying
" Do not buy me or use me " Going back 20 versions to flash a rom , what a joke, what did they smoke? kornflakes?
The Pinephone allows root on the default Rom, just simply go to developer options, and toggle
" Root Access " And the integrated options will give it to you, no google in it, nothing. Many phones like that one allow OEM unlock (Bootloader- Unlock) Natively, integrated without adb or fastboot. This Xiomi crap sold its soul to the china president and the gouverments, and to google. Bloated with crap, no freedom(they try to tie you to a MIUI account), No proper user control/autonomy, no capabilities, a cpu older than their previous releases.
I honestly feel like an old man trapped in 1980 with an old Commodore 64 , not knowing how to program anything with it ,or how to make a command work. Everything just gives error. And most importantly i feel i own a product worst than the Commodore 64.
I feel like i will have to wait another 20 years in order to see improvements, some kind of Windows, or more advanced version of Linux on the phone, polished ubuntu touch, or Fedora in it. Because right now it just sucks. The whole playstore structure, and the whole default OS is garbage on 92% of the phones.
I quit on them for the next 20 years.
WE should support the Pinephone, Oneplus, raspberry, in any case, Good Companies, not this Xiaomi crap.

<Moderator Edit>: Original English version of quote added.
jdd1996 said:
why does it become hard bricked after trying to downgrade?
Click to expand...
Click to collapse
yes

Thank god I fixed my phone, I just had to press volume + and - and wait a few seconds after I did the bypass with the latest china rom and sp flash tool v5.2020

duvanlop04 said:
Thank god I fixed my phone, I just had to press volume + and - and wait a few seconds after I did the bypass with the latest china rom and sp flash tool v5.2020
Click to expand...
Click to collapse
Happy to hear that bro! Have a good night/day!