Database Info

[Q] How to generate nvram database (the BPLGUInfoCustomAppSrcP file) ?

Hello,
Any of the nvram db files I found on the internet are being rejected by Maui meta 3g ("nvram database file is inconsistent with target load").
I hence tried to generate my own nvram db with MTK droid tools, but the only file it gives me that approaches the size of those db file is an "nvram.bin". Which isn't either accepted by Maui meta ("execution failure initialize nvram database file").
So where do these BPLGUInfoCustomAppSrcP files come from, initially?
(My initial problem being that I Formatted NVRAM using SP Flash Tool and lost IMEI on my Jiayu G4S).
Thanks in advance.

up

up

nvram
How to get get them

I am wondering the same. I am using lenovo A536, and from what i've read i should have some "database" folder in my stock rom... which isnt there Can anyone share with me how can i generate my own, or at least find the ones i need ?

amynbe said:
Hello,
Any of the nvram db files I found on the internet are being rejected by Maui meta 3g ("nvram database file is inconsistent with target load").
I hence tried to generate my own nvram db with MTK droid tools, but the only file it gives me that approaches the size of those db file is an "nvram.bin". Which isn't either accepted by Maui meta ("execution failure initialize nvram database file").
So where do these BPLGUInfoCustomAppSrcP files come from, initially?
(My initial problem being that I Formatted NVRAM using SP Flash Tool and lost IMEI on my Jiayu G4S).
Thanks in advance.
Click to expand...
Click to collapse
Root the phone and find it in directory /system/etc/mddb/

anandnitin25 said:
How to get get them
Click to expand...
Click to collapse
Just install the TWRP you can find it here. I hope you know how to install it.
Then enter to TWRP recovery holding "volume up " + restart the phone. From TWRP you can make NVRAM backup copy.

sur. said:
Root the phone and find it in directory /system/etc/mddb/
Click to expand...
Click to collapse
I do that but the file BPLGUInfoCustomAppSrcP_MT6735_S00_K5_ROW_LWG_V56_1_lwg_n into the folder give me the following message on MAUI Meta:
"please check the version of load and NVRAM database are same" on Download Flash action.
If i use the file into Flash Tools, the message is about inconscistence, and pop-up on Change NVRAM Database action on the Maui
??
Thanks for some help

aredejrf said:
I do that but the file BPLGUInfoCustomAppSrcP_MT6735_S00_K5_ROW_LWG_V56_1_lwg_n into the folder give me the following message on MAUI Meta:
"please check the version of load and NVRAM database are same" on Download Flash action.
If i use the file into Flash Tools, the message is about inconscistence, and pop-up on Change NVRAM Database action on the Maui
??
Thanks for some help
Click to expand...
Click to collapse
I would like to know this too, having the same problem!

Same error
aredejrf said:
I do that but the file BPLGUInfoCustomAppSrcP_MT6735_S00_K5_ROW_LWG_V56_1_lwg_n into the folder give me the following message on MAUI Meta:
"please check the version of load and NVRAM database are same" on Download Flash action.
If i use the file into Flash Tools, the message is about inconscistence, and pop-up on Change NVRAM Database action on the Maui
??
Thanks for some help
Click to expand...
Click to collapse
hey did you get a solution for that or did u get any other olution for fixing the invalid imei problem????

[Q] How to extract build.prop from system.img

I have the stock rom for the Galaxy S6 Cricket variant... I am having trouble in getting the build.prop from the system.img. I have tired many methods from other threads but none seem to work. Any suggestions or working ways to extract the build.prop from the system.img or any way to open up the .img file.
I am doing this to post the rom in the ROM WIP section for the root.

gmx1994 said:
I have the stock rom for the Galaxy S6 Cricket variant... I am having trouble in getting the build.prop from the system.img. I have tired many methods from other threads but none seem to work. Any suggestions or working ways to extract the build.prop from the system.img or any way to open up the .img file.
I am doing this to post the rom in the ROM WIP section for the root.
Click to expand...
Click to collapse
Try the tools in this thread . I used them last week to extract a build prop.
Just load up the system.IMG and drag the file from the system folder to your desktop.

gmx1994 said:
I have the stock rom for the Galaxy S6 Cricket variant... I am having trouble in getting the build.prop from the system.img. I have tired many methods from other threads but none seem to work. Any suggestions or working ways to extract the build.prop from the system.img or any way to open up the .img file.
I am doing this to post the rom in the ROM WIP section for the root.
Click to expand...
Click to collapse
The tar file for Cricket has already been posted in the general section of ATT
Sent from my SAMSUNG-SM-G920AZ

daniel4653 said:
The tar file for Cricket has already been posted in the general section of ATT
Sent from my SAMSUNG-SM-G920AZ
Click to expand...
Click to collapse
I already downloaded that file.... I just need to extract the build.prop from the system.img which I already have. The thing is I am having trouble getting the build.prop
Sent from my SAMSUNG-SM-G920AZ

gmx1994 said:
I have the stock rom for the Galaxy S6 Cricket variant... I am having trouble in getting the build.prop from the system.img. I have tired many methods from other threads but none seem to work. Any suggestions or working ways to extract the build.prop from the system.img or any way to open up the .img file.
I am doing this to post the rom in the ROM WIP section for the root.
Click to expand...
Click to collapse
I got your PM. Sorry for the late reply. I'm posting here in case someone else needs the info.
Download Ext2explore.
Extract to your PC.
Run as administrator.
In app: go to file - open image - (find your system image) and open
It will display your image in tree and folder view
Use either one (depending on your preference) (but your build.prop will be in the first view as its in the root of the system).
Right click the file/s you want to extract
Select save
Save your file.......profit
Hope this helps

tiboric said:
I got your PM. Sorry for the late reply. I'm posting here in case someone else needs the info.
Download Ext2explore.
Extract to your PC.
Run as administrator.
In app: go to file - open image - (find your system image) and open
It will display your image in tree and folder view
Use either one (depending on your preference) (but your build.prop will be in the first view as its in the root of the system).
Right click the file/s you want to extract
Select save
Save your file.......profit
Hope this helps
Click to expand...
Click to collapse
When I try to open the file the program just closes and i go to the log and this is what it says.
Error Opening \\.\PhysicalDrive1. Error Code 2
No of disks 1
Scanning \\.\PhysicalDrive0
index 0 ID 7 size 976769024
Partition Table Error on C:/Users/giovany/Desktop/New folder (2)/system.img
Invalid End of sector markerBad Super Block. The drive is not ext2 formatted.

Drive is not right formatted.

solution for img extraction/fix here

Rom PD1805_A_1.14.5-update-full.zip

Hello,
I was able to dowload this file +Rom PD1805_A_1.14.5-update-full.zip" . Is anyone able to make it flashable with SP_Flash_Tool ?
Here is the link : https://mega.nz/#!5I4hxaQD!FBdmF9C8q8AWfOmb0qlFvIrvP2BI1JgXNBHdpyABjlE
Thanks for your help

Is this a global ROM or the stock China one?

Jeweettoch13 said:
Is this a global ROM or the stock China one?
Click to expand...
Click to collapse
There are all languages but as far as I know there is no Global Rom at the moment.

evenshop said:
Hello,
I was able to dowload this file +Rom PD1805_A_1.14.5-update-full.zip" . Is anyone able to make it flashable with SP_Flash_Tool ?
Here is the link : https://mega.nz/#!5I4hxaQD!FBdmF9C8q8AWfOmb0qlFvIrvP2BI1JgXNBHdpyABjlE
Thanks for your help
Click to expand...
Click to collapse
Eh, I've downloaded it but found this file was corrupt

You can't unzip it, you have to flash it by copying it on the device

evenshop said:
You can't unzip it, you have to flash it by copying it on the device
Click to expand...
Click to collapse
The file is corrupt. You should be able to open it (archive viewer) and see the files. I even attempted to repair the file using terminal commands, it seems that half the files are missing/damaged.

You can also get it directly from vivo: http://sysupwrdl.vivo.com.cn/upgrad...es/PD1805_A_1.15.7-update-full_1530708851.zip
(1.15.7)

Nokia 3 build number and serial number lost

Hello,
so I accidentally flashed Nougat through SPF Tools and choose format all + download, so I lost both serial numbers and also Build number..
I searched all over the forums and found multiple threads here and there, but the problem is I don't have original serial number, I've searched in the phone box and found nothing.. I cannot open bootloader nor flashing TWRP through SPFT works..
Any idea how I can retrieve build number back?

NVM, I fixed it. If anyone had this problem you can contact me.

Hello
hello I have the same problem can you help me

Ga1lan said:
NVM, I fixed it. If anyone had this problem you can contact me.
Click to expand...
Click to collapse
Hey!
same problem please help

Ericksebitas said:
hello I have the same problem can you help me
Click to expand...
Click to collapse
Qgmad said:
Hey!
same problem please help
Click to expand...
Click to collapse
ibb. * co/kBfGDNX
When you open the firmware folder there is another folder in it called extra files. In that there are 2 files named nvram and proinfo. You have to flash those files too.
ibb. * co/y0c5fJs
You have to change android scatter file in the main folder. Open android scatter file and search for nvram Just change file_name : nvram.bin and is_download : true as shown in the image. Then search for proinfo (proinfo.bin) and do the same. Then copy both nvram.bin and proinfo.bin to main folder While flashing, only uncheck preloader and flash everything as Download only .
ibb. * co/GCSXV5d
ibb. * co/VL0wJdk
P.S. : I was having a problem (error :2004). But it was solved after I updated my phone to android pie.
But after the flash my phone was not starting. It was just vibrating after every couple of seconds, and the same error kept showing up when I tried to flash the files again.
turns out that the problem was the Download-Agent. So I changed that and the flashing went perfectly.
Helped by Ga1lan

[SOLVED] Looking for a V500N LGU Korean variant QFIL dump and rawprogram files

EDIT: I don't need this anymore since I've fixed the problem
Could anyone please help me to upload the QFIL partition dump and the rawprogram files of a V500N LGU variant V50? I tried the dump files for the Sprint variant, and it enabled me to go into the download mode. However, I can't flash any stock ROM, neither the Korean ones nor the American ones. LG Bridge can't detect anything as well.

I think there is a patched LGUP here in this LG G8 thread but I'm not sure if it works on V50, you can use it to flash KDZ which you can download from LG website according to your variant

Bronnel said:
I think there is a patched LGUP here in this LG G8 thread but I'm not sure if it works on V50, you can use it to flash KDZ which you can download from LG website according to your variant
Click to expand...
Click to collapse
I think I have already been using that version of LGUP. I didn't have any problem with flashing the stock ROM before. Now I am facing this problem where I can't flash any stock ROM because LGUP always encounters a cross-flashing problem. Most likely, this is because of the incompatible partition dump files I've used.

wibigdog said:
EDIT: I don't need this anymore since I've fixed the problem
Could anyone please help me to upload the QFIL partition dump and the rawprogram files of a V500N LGU variant V50? I tried the dump files for the Sprint variant, and it enabled me to go into the download mode. However, I can't flash any stock ROM, neither the Korean ones nor the American ones. LG Bridge can't detect anything as well.
Click to expand...
Click to collapse
Hello i am currently facing the same problem, no download mode only edl mode, how are u able to revive your phone? Im using lg v50 korean variant

wibigdog said:
I think I have already been using that version of LGUP. I didn't have any problem with flashing the stock ROM before. Now I am facing this problem where I can't flash any stock ROM because LGUP always encounters a cross-flashing problem. Most likely, this is because of the incompatible partition dump files I've used.
Click to expand...
Click to collapse
Hi, I have a same problem, how can you fix this case?

optimus207 said:
Hi, I have a same problem, how can you fix this case?
Click to expand...
Click to collapse
1. download the Korean KDZ
2. get the rawprogram.xml from the sprint backup
3. download the .exe version of KZDtool here: https://bbs.lge.fun/thread-69.htm. Btw, the link in the tutorial has been outdated, I found the correct URL using Google: https://www.lanzoux.com/ia1u5ub
4. follow the tutorial using google translate to get most of the .img files
5. follow this tutorial https://bbs.lge.fun/thread-75.htm to get the OP.img, because KDZtool won't work for this OP img. You'll need a hex editor.
6. Drag and replace everything in the original Sprint backup with the Korean .img files
7. Flash in QFIL with firehose and the rawprogram files from the Sprint backup
8. You'll finally be able to go into the download mode
9. Now flash the Korean KDZ in PARTITION DL mode, since the refurbish or upgrade mode won't work

wibigdog said:
1. download the Korean KDZ
2. get the rawprogram.xml from the sprint backup
3. download the .exe version of KZDtool here: https://bbs.lge.fun/thread-69.htm. Btw, the link in the tutorial has been outdated, I found the correct URL using Google: https://www.lanzoux.com/ia1u5ub
4. follow the tutorial using google translate to get most of the .img files
5. follow this tutorial https://bbs.lge.fun/thread-75.htm to get the OP.img, because KDZtool won't work for this OP img. You'll need a hex editor.
6. Drag and replace everything in the original Sprint backup with the Korean .img files
7. Flash in QFIL with firehose and the rawprogram files from the Sprint backup
8. You'll finally be able to go into the download mode
9. Now flash the Korean KDZ in PARTITION DL mode, since the refurbish or upgrade mode won't work
Click to expand...
Click to collapse
can i need the raw.xml file for the v500n variant

Hi man, how you fix the problem?

wibigdog said:
1. download the Korean KDZ
2. get the rawprogram.xml from the sprint backup
3. download the .exe version of KZDtool here: https://bbs.lge.fun/thread-69.htm. Btw, the link in the tutorial has been outdated, I found the correct URL using Google: https://www.lanzoux.com/ia1u5ub
4. follow the tutorial using google translate to get most of the .img files
5. follow this tutorial https://bbs.lge.fun/thread-75.htm to get the OP.img, because KDZtool won't work for this OP img. You'll need a hex editor.
6. Drag and replace everything in the original Sprint backup with the Korean .img files
7. Flash in QFIL with firehose and the rawprogram files from the Sprint backup
8. You'll finally be able to go into the download mode
9. Now flash the Korean KDZ in PARTITION DL mode, since the refurbish or upgrade mode won't work
Click to expand...
Click to collapse
I followed and got the file. OP_LGU_KR.img what to do next please help

Aumkup said:
I followed and got the file. OP_LGU_KR.img what to do next please help
Click to expand...
Click to collapse
Hi man, how you find the OP_LGU_KR.img? I can't read the tutorial because the sites down for me.

Aumkup said:
I followed and got the file. OP_LGU_KR.img what to do next please help
Click to expand...
Click to collapse
OMG now i can read the website, i'll do today!!

Aumkup said:
I followed and got the file. OP_LGU_KR.img what to do next please help
Click to expand...
Click to collapse
Friend i win this battle, follow this:
1. download the Korean KDZ
2. download the .exe version of KZDtool here: https://bbs.lge.fun/thread-69.htm. Btw, the link in the tutorial has been outdated, I found the correct URL using Google: https://www.lanzoux.com/ia1u5ub
3. Download the v50unbrickbackup https://drive.google.com/file/d/13AJ8SnKmpOrTQF2EQ1odJK7-4qfUTIdF/view
4. join the folders with the images and the .bin
5. download .raw files that i make https://mega.nz/folder/dAYzySqA#IMxrMAZeBCaAuUZ_eFB6Uw
(notice that there is a mix of img and bin files.
This is due to missing some files from step 2)
6. put your cell in EDL and open qfil, select all rawprogrames with ctrl+a, and download!
7. After process, your phone go to download mode.
8. In LGUP, select refurbished, and join
(in this step i tried a few times without success. The process failed midway.
But after 2 attempts, success!)
FOR ME WORKS, I'm VERY GLAD! I PRAY A LOT, AND JESUS SAVE THE DAY. LOVE JESUS REALLY, GOD SAVE MY MONEY AFTER I PRAY.
Friend i try but.. Nothing just lose phone. i'm sick because this!

Aumkup said:
I followed and got the file. OP_LGU_KR.img what to do next please help
Click to expand...
Click to collapse
Friend i win this battle, follow this:
1. download the Korean KDZ
2. download the .exe version of KZDtool here: https://bbs.lge.fun/thread-69.htm. Btw, the link in the tutorial has been outdated, I found the correct URL using Google: https://www.lanzoux.com/ia1u5ub
3. Download the v50unbrickbackup https://drive.google.com/file/d/13AJ8SnKmpOrTQF2EQ1odJK7-4qfUTIdF/view
4. join the folders with the images and the .bin
5. download .raw files that i make https://mega.nz/folder/dAYzySqA#IMxrMAZeBCaAuUZ_eFB6Uw
(notice that there is a mix of img and bin files.
This is due to missing some files from step 2)
6. put your cell in EDL and open qfil, select all rawprogrames with ctrl+a, and download!
7. After process, your phone go to download mode.
8. In LGUP, select refurbished, and join
(in this step i tried a few times without success. The process failed midway.
But after 2 attempts, success!)
FOR ME WORKS, I'm VERY GLAD! I PRAY A LOT, AND JESUS SAVE THE DAY. LOVE JESUS REALLY, GOD SAVE MY MONEY AFTER I PRAY.

andress722 said:
Friend i win this battle, follow this:
1. download the Korean KDZ
2. download the .exe version of KZDtool here: https://bbs.lge.fun/thread-69.htm. Btw, the link in the tutorial has been outdated, I found the correct URL using Google: https://www.lanzoux.com/ia1u5ub
3. Download the v50unbrickbackup https://drive.google.com/file/d/13AJ8SnKmpOrTQF2EQ1odJK7-4qfUTIdF/view
4. join the folders with the images and the .bin
5. download .raw files that i make https://mega.nz/folder/dAYzySqA#IMxrMAZeBCaAuUZ_eFB6Uw
(notice that there is a mix of img and bin files.
This is due to missing some files from step 2)
6. put your cell in EDL and open qfil, select all rawprogrames with ctrl+a, and download!
7. After process, your phone go to download mode.
8. In LGUP, select refurbished, and join
(in this step i tried a few times without success. The process failed midway.
But after 2 attempts, success!)
FOR ME WORKS, I'm VERY GLAD! I PRAY A LOT, AND JESUS SAVE THE DAY. LOVE JESUS REALLY, GOD SAVE MY MONEY AFTER I PRAY.
Friend i try but.. Nothing just lose phone. i'm sick because this!
Click to expand...
Click to collapse
hello, I don't understand how to do it in step 2, the links are no longer there. can you re-explain? thank