Question pls i need your help for SAT101B030142R18-45143M048IN-517 30pin - FYT Android Head Units

Hello everyone, I need a firmware for a display of the type SAT101B030142R18-45143M048IN-517
because my head unit is stopped now

mohamed_mohi said:
Hello everyone, I need a firmware for a display of the type SAT101B030142R18-45143M048IN-517
because my head unit is stopped now
Click to expand...
Click to collapse
Stick to your original thread. Do not start a new post about the same issue.

Is it FYT, post Android system information including MCU version

Related

[Completed] hi my android head unit start sound problem and the slid screen stop to move

my devise is 4.1.1 android head unit cortex a9 dual core mcu ver :4.3.1-1-10-0901 system ver 2.7.9
plz help
[email protected]
Hi,
We need to know the actual make and model number of your device to point you towards help. Also, some clearer details of your issue please .
If you're using a translate program to post in English, perhaps be more clear and specific.
Thanks!

[Completed] Question on USB input in Android car headunit

Hello guys, I was just referred to the forum by a friend of mine to hopefully receive some expert advice from.
I have recently purchased and installed an android headunit in to my car, and out of it there are two USB ports.
One is for 3G/4G internet dongle, and another is for Media transfer.
When i plugged in the USB stick, instead of it flashing (when it works on computer it flashes constantly), it flashed for one second and gone.
The headunit itself cannot pick up any signals/cant recognise the USB stick.
Would you guys have any ideas how to tackle this?
In specific, the specs are:
Android: 4.4.2
MCU version: 5.3 18-60-10-C00101-160111
System version: 4.5.9_20160322
Cheers in advance.
Bernie
Hello Bernie
Thank you for using XDA Assist.
Please use the below link to register a XDA Account first, prior to start posting and replying onto our forums.
Join the Experts
When you complete your registration, I invite you to post over your request in the below forum as our team of experts there should be able to help you:
Connected Car
Best regards and good luck.
.
XDA Visitor said:
Hello guys, I was just referred to the forum by a friend of mine to hopefully receive some expert advice from.
I have recently purchased and installed an android headunit in to my car, and out of it there are two USB ports.
One is for 3G/4G internet dongle, and another is for Media transfer.
When i plugged in the USB stick, instead of it flashing (when it works on computer it flashes constantly), it flashed for one second and gone.
The headunit itself cannot pick up any signals/cant recognise the USB stick.
Would you guys have any ideas how to tackle this?
In specific, the specs are:
Android: 4.4.2
MCU version: 5.3 18-60-10-C00101-160111
System version: 4.5.9_20160322
Cheers in advance.
Bernie
Click to expand...
Click to collapse

[Completed] Head unit without android .

I bought a head unit thinking it would come with android on it . I'm just wondering if there is anyway I can have android installed on it , device info ,if anyone can tell me if I can have android put on it and be able to connect to hotspot from phone.
HMI :KLD020.1.1 14.11.11.08.48
MCU :KLD01.140619(54)
MEDIA :MMP.2014.11.3.9.20.
NKV :A10.2.0 2014.11.06.13.29
BTV :BT201409181728(F8:0C:54:39:7E:3F)
DVDROM:13.42.1.NAND.1200XH.c.0
gaz1971 said:
I bought a head unit thinking it would come with android on it . I'm just wondering if there is anyway I can have android installed on it , device info ,if anyone can tell me if I can have android put on it and be able to connect to hotspot from phone.
HMI :KLD020.1.1 14.11.11.08.48
MCU :KLD01.140619(54)
MEDIA :MMP.2014.11.3.9.20.
NKV :A10.2.0 2014.11.06.13.29
BTV :BT201409181728(F8:0C:54:39:7E:3F)
DVDROM:13.42.1.NAND.1200XH.c.0
Click to expand...
Click to collapse
Greetings and welocme to xda. If you ask your question here
http://forum.xda-developers.com/android-auto/android-head-units
the experts there will be able to help you
Good Luck
Sawdoctor

[Completed] Scaeine 9inch Car head Unit WiFi Missing

Hello Everyone,
I hope this is the correct thread to ask this question.
I have recently installed a Secaine 9” android Radio in my 2009 Porsche Cayenne GTS. I had it working well but then tried to update the firmware to IQ Navi which has been used by several others that I know of successfully in this very same radio. The update seemed to go well except now I have no wifi options available . I can no longer see my LAN or those off my neighbors which I could see before updating the firmware.
I have not updated The MCU.
I have tried to reset the unit to factory defaults but still no wiFi!
Specs:
quadcore-R16 1.6G
Android 4.4.2
MCU : 5.3.18-B32-E43101-160531
Thanks in advance for any help you can offer and let me know if I should post this some where else. I am just a bit desperate!
DES in Austin
daveguy said:
Thanks in advance for any help you can offer and let me know if I should post this some where else. I am just a bit desperate!
Click to expand...
Click to collapse
Hi there and welcome to assist,
Unfortunately there is nothing about your question on XDA forum. Try a Google search.
Good luck

Problem sound maximum Android 8 Px5

Hello. I have a px5.
Occasional, when I start the car, the sound at navigation starts at maximum and I must always restart navigation. Has anyone encountered this problem before?
Please help me!!!
Is the device an MTCD/E unit? Post MCU version/code.
marchnz said:
Is the device an MTCD/E unit? Post MCU version/code.
Click to expand...
Click to collapse
MTCE_GS_V2.78_1 ( I had MTCE_GS_V2.78_3 but I gave an update, my navigation had broken down and then I found V2.78_1 on the internet ...
I didn't know what MTCE Update to install.)

Categories

Resources