Hello Everyone,
I hope this is the correct thread to ask this question.
I have recently installed a Secaine 9†android Radio in my 2009 Porsche Cayenne GTS. I had it working well but then tried to update the firmware to IQ Navi which has been used by several others that I know of successfully in this very same radio. The update seemed to go well except now I have no wifi options available . I can no longer see my LAN or those off my neighbors which I could see before updating the firmware.
I have not updated The MCU.
I have tried to reset the unit to factory defaults but still no wiFi!
Specs:
quadcore-R16 1.6G
Android 4.4.2
MCU : 5.3.18-B32-E43101-160531
Thanks in advance for any help you can offer and let me know if I should post this some where else. I am just a bit desperate!
DES in Austin
daveguy said:
Thanks in advance for any help you can offer and let me know if I should post this some where else. I am just a bit desperate!
Click to expand...
Click to collapse
Hi there and welcome to assist,
Unfortunately there is nothing about your question on XDA forum. Try a Google search.
Good luck
Related
Hello,
I'm new here and i have a question about my gps on the gt-I9100.
Here on the site is a patch that solves the connecting problem on the GT-I9100 G.
So i installed the patch and then i noticed that it din't work at all anymore. It was only then that i noticed that it was for the model GT_I9100 G
and not mine the GT-I9100. I didn't even know there was a G model. But alas the harm was done.
Now my question is, has anyone the original file for the gps of my model (so i could flash it back to normal)? I've been searching the site but could'nt find a solution.
Thanks in advance
Not sure on your question but you might get better answers posting your question in your devices Q&A forum. Good luck!
Thanks, I'll try
Hello!
II'm from Germany and I'm new registered here in the forum because I have a problem with the ES9401GE Erisin. I've read a lot of interresting and helpful tips here on the forum. Sorry for my Google English
I hope you can help me.
I have the Erisin ES9401GE installed in my Polo 6R and I am very satisfied.
But after updating to 4.4.4 KitKat of Boo is my OPS display incorrectly. It is probably because of the resolution. Can I fix it? How can I adjust the resolution so that the display reads correctly again?
Thanks
Stephan
Hi there guys,
First of all grear job i've found so many assists in this forum. I have a new issue comming, see i had this android tv box and i wanted to flash a new firmware, and it went all complete, but after i rebooted it stood there: can't mount cache, and i think the reason why is that i didn't do reset factory. I have tried so hard from recovery mode to wipe data/cache/ and media but no success at all. I think that the tv box is bricked now and it does not function nor accept anything. The tv box is : geniatech atv310b, with an arm cortex a9 processor, 1gb rom. You are more than welcome to flood me with your ideas, and inform me so that i will try every option to fix this issue.
Thank you in advance for participating,
Rizvan,
Hi there,
I see you already posted another thread in the right forum here: http://forum.xda-developers.com/general/general/unsupported-video-t3052217
Please keep waiting an answer there from the owners/experts.
Thanks
Good luck
Yeah sure any help will be appreciated ?
I did also shoot a picture so that it might be clearer for you. Any help guys ?
Hi every body and thank you for your help along with my last android phones ;
i had a problem with my new tab Condor Ctab980ri "Algeria" and i start messing it so i searched but i found nothing but its stock-rom from its manufacturer . and the last time, i had problem with dongle app settings, so i managed to uninstall and reinstall it ; but i couldn't reinstall it ,so i had to return to the stock rom but when i did . i couldn't hear anything from the speakers while everythink works normally with earphones )
and these are the information of my tab release :
model number : ctab890ri
ifwi version : f9.db
kernel version 3.4.34-92211-gafeff8d [email protected]#1 tue dec 3 18:48:01 cst 2013
build number: condor_ctab890ri_20131203
CPU Intel® Atom® Z2580 2.0GHz
RAM 2 Go
Memoire interne 16 Go
Systeme d'exploitation Android 4.2.2 Jelly Bean
so anybody can help me please
Hi
Thanks for writing to us at XDA Assist. Unfortunately I can't find anything relating to your question on XDA, please ask here:
Questions and Answers
timmaaa said:
Hi
Thanks for writing to us at XDA Assist. Unfortunately I can't find anything relating to your question on XDA, please ask here:
Questions and Answers
Click to expand...
Click to collapse
tanks for replying , today i found a tablet with the same specifications and i tried its firmware for my tab. mine was "condor ctab890ri" and the similaire one is freetab 9000 ips and firm was :
http://freetab.eu/softy/ENG/Tablets...2.2/PZPN/Firmware_9000_PZPN_android_4.2.2.rar
the sound problem has been solved but the OTG "Usb 3 G dongle" still crushes . i hope that you can help me in this one bye
ahkhel said:
tanks for replying , today i found a tablet with the same specifications and i tried its firmware for my tab. mine was "condor ctab890ri" and the similaire one is freetab 9000 ips and firm was :
http://freetab.eu/softy/ENG/Tablets...2.2/PZPN/Firmware_9000_PZPN_android_4.2.2.rar
the sound problem has been solved but the OTG "Usb 3 G dongle" still crushes . i hope that you can help me in this one bye
Click to expand...
Click to collapse
Please ask your question in the q&a section I linked you to above, thanks.
Thread closed, thanks.
I have a seicane 10.1 head unit in my jeep wrangler I factory reset it and now I have lost everything. Like my car play and I had Netflix but when I try to reinstall them it tells me there not compatible with my radio when they came from the factory installed already...my question is can I update the mcu if so where could I find it...it currently has mcu version MTCP_HF_V3.30_1 her is some pictures of I think everything need please if there is an update please lead me in that direction thanks Bo.