Hello everyone, I know that many on this forum have many desires for this phone, such custom kernel, root, gsi, twrp.
Let's get started:
How to install root access on RMX3261/3262/3263
1. Download stock ROM version 97: Download and extract .pac file from it Link
2. Install SPD research tool and it's drivers: GDrive
3. Open it
4. Click on single gear icon
5. Select stock rom's .pac file
6. Wait until it loads
7. Click on two gears icon
8. Find BOOT in list
9. Right click on path near it
10. Download from here Boot and Select
11. Click OK then click arrow icon
12. Turn off your phone
13. Hold Power + VolumeDown until you see "Downloading" text
14. After you see it, release buttons
15. Wait until you see "Passed" text
16. Click stop icon, disconnect your phone and power it on
How to install custom ROM || GSI
As everyone knows, unlocking bootloader on this device is impossible. But you can modify the BOOT partition to make 3261/3263/3263 boot GSIs
So what you need to do:
Firstly, you need to unlock fastbootd:
1. Download stock ROM version 91: Download and extract .pac file from it Link
2. Install SPD research tool and it's drivers: GDrive
3. Open it
4. Click on single gear icon
5. Select stock rom's .pac file
6. Wait until it loads
7. Click on two gears icon
8. Find BOOT in list
9. Right click on path near it
10. Download from here and Select boot_r1.img
11. Click OK then click arrow icon
12. Turn off your phone
13. Hold Power + VolumeDown until you see "Downloading" text
14. After you see it, release buttons
15. Wait until you see "Passed" text
16. Click stop icon, disconnect your phone and power it on
Now you have unlocked fastbootd so you can flash ROMs:
1. Install ADB fastboot drivers from here: GDrive
2. Download your GSI and extract it to .img file
3. Enable USB debugging on your phone and connect it to pc
4. Open adb platform tools
5. type adb reboot fastboot and hit enter
6. Wait until phone reboots into fastbootd mode
7. Type fastboot flash system "path to GSI" and hit enter.
8. If you get error "Not enough space to resize partition" type fastboot delete-logical-partition product_a and hit enter
9. When it finished Type fastboot erase userdata and hit enter
10. When it finished Type fastboot reboot and hit enter
11. Enjoy using a custom ROM
How to unbrick if ROM doesn't boot:
perform same steps like when you unlock fastbootd
Bugs in GSI
A12/A13
1. Overlay(Brightness fix): install this magisk module GDrive
2. Bluetooth audio can interrupt when wifi is turned on
3. Use Footej Camera if no sound in video recording
A13 only
Videocodec fix
Replacing the stock codec On a Vulcan GDrive - this is a magisk module
This is a module magisk made by me and my colleagues in 4pda
For all questions, write to the topic.
Pixel Experience Plus 12.1 v416
Android Version: 12.1
Phh Source version: v416
Build date: 11/18/22
Download: Link
Changelog:
• Sync with November sources of PE+
• Sync with AOSP 12.1 v416
❗️Known Bugs:
- Overlay
- Bluetooth audio can interrupt when wifi is turned on
- Low quality of stock screen recorder
- Use Footej Camera if no sound in video recording
Do android 11 gsi custom ROMs have bugs?
Did you find stable gsi rom
all of the above bugs do not depend on gsi, although some A11-A13 have their own bugs
idon'tknowu said:
Do android 11 gsi custom ROMs have bugs?
Click to expand...
Click to collapse
There are none, download Pixel Experience A11 AB
leanord said:
There are none, download Pixel Experience A11 AB
Click to expand...
Click to collapse
thanks can u pls send me link
https://github.com/ponces/treble_build_pe/releases/download/v313/PixelExperience_arm-ab-11.0-20211009-UNOFFICIAL.img.xz
leanord said:
https://github.com/ponces/treble_build_pe/releases/download/v313/PixelExperience_arm-ab-11.0-20211009-UNOFFICIAL.img.xz
Click to expand...
Click to collapse
Rom not booting and I unbricked by flashing realme firmware
leanord said:
https://github.com/ponces/treble_build_pe/releases/download/v313/PixelExperience_arm-ab-11.0-20211009-UNOFFICIAL.img.xz
Click to expand...
Click to collapse
Please give me another rom
And can you give me magisk patched boot.img 97 version just in case
Boot.img not extracting in spd tried using pac unpacker 2.1 boot img not pachting in magisk error
Now my phone can't be turned on, please help me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
mink.juong said:
Now my phone can't be turned on, please help me View attachment 5825141
Click to expand...
Click to collapse
Use research tool 24 version not upgrade tool
idon'tknowu said:
Use research tool 24 version not upgrade tool
Click to expand...
Click to collapse
mink.juong said:
View attachment 5825757
Click to expand...
Click to collapse
use r4.0.0001 upgrade tool
mink.juong said:
View attachment 5825757
Click to expand...
Click to collapse
r4.0.0001 upgrade tool link https://www.mediafire.com/file/cy2j6rcldu75t6z/SPD_Upgrade_Tool_R4.0.0001.zip/file
leanord said:
tom RO
Click to expand...
Click to collapse
leanord said:
fastboot erase u
Click to expand...
Click to collapse
idon'tknowu said:
r4.0.0001 upgrade tool link https://www.mediafire.com/file/cy2j6rcldu75t6z/SPD_Upgrade_Tool_R4.0.0001.zip/fi
Click to expand...
Click to collapse
mink.juong said:
View attachment 5825757
Click to expand...
Click to collapse
You have to wait, then everything will load
idon'tknowu said:
And can you give me magisk patched boot.img 97 version just in case
Click to expand...
Click to collapse
Second
Related
Hi now TWRP 3.0.2 its out for your Vernee Apollo Lite [WORKS]
special [email protected][email protected]
tested with latest original Vernee OTA K15TB-A.A.vR1C.N1.160727 (27.07.2016)
bugs: ADB not working. Same isue for ADB sideload and MTP too.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Download this Files:
TWRP_302_for_Vernee_Apollo_Lite_P6.zip
UPDATE-SuperSU-v2.76-20160630161323.zip
01-driver-Pc_Windows.rar - If you are under Windows 8/10[FONT=Verdana, Arial, sans-serif, Tahoma] you need to disable signature verification of drivers ! HOWTO)
[/FONT]SP_Flash_Tool_5.1612.00.000_Windows.zip
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Installation:
1. copy UPDATE-SuperSU-v2.76-20160630161323.zip directly to internal or externeal SD Card.
2. In Phone goto Settings->About Phone->tab 5-7times on (Build number) to activate Developer Options.
3. goto Settings->Developer Options and activate (OEM Unlocking) and (USB debugging).
4. turn Phone completly off.
5. extract (01-driver-Pc_Windows.rar) on your Windows with (7zip) and install with (InstallDriver.exe).
6. extract (SP_Flash_Tool_5.1612.00.000_Windows.zip) on your Windows with (7zip).
7. extract (TWRP_302_for_Vernee_Apollo_Lite_P6.zip) on your Windows with (7zip).
8. open the folder (SP_Flash_Tool_5.1612.00.000_Windows)and run (flash_tool.exe).
9. in SP Flash Tool search the file scatter (MT6797_Android_scatter.txt) with the yellow button on the right (Scatter-loading) in the folder of extract TWRP.
10. Now SP Flash Tool must look like this with only marked at recovery:
11. now in SP Flash Tool press the green (DOWNLOAD) Button on the middle.
12. Plug your Usb Cable into Phone and wait until SP Flash Tool says FINISH! (plz use a USB2 Connector on your Pc!)
13. Now TRWP was flashed and ready to use if NOT, try Step 6-9 again.
14. turn Phone completly off.
15. hold Volume(+) and Power Button for ~5sec until you see the mini Apollo Lite Recovery Menu.
16. with Volume(+) chose RECOVERY Press Volume(-) for Ok.
17. Now you can see TWRP Main Menu Use Language English!!!
18. in TWRP goto (Install ZIP) then (Choose zip from SD Card) or search in (Choose zip from ExtraSD) for UPDATE-SuperSU-v2.76-20160630161323.zip and flash.
19. in TWRP go back and do REBOOT.
20. Now you have a working TWRP and ROOT
xx. If you want to install / flash Xposed and the amazing Dolby Atmos too, check my another HowTo
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Youtube Tutorial English:
https://www.youtube.com/watch?v=5XWoAniehhI
Youtube Tutorial Deutsch:
https://www.youtube.com/watch?v=VjZXw7Bs8jA
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
have fun regards ice
plz move to Vernee Apollo Lite section.
regards ice
Hey, can I use this with the Apollo X25?
Hello. I tried several times to install TWRP. I would like use superdragonpt nougat ROM but I can't do it without rooting my phone. Is there a way to do it with the latest OTA installed?
cant i just use ADB / fastboot to install TWRP? im on linux and im really not the biggest fan of tools like this..
scatter file
how can i create my own scatter file to backup stock rom first ?
mtk droid tool not support mt6797
Anyone gonna do 3.1.1 now?
#ApolloLiteProblems said:
Anyone gonna do 3.1.1 now?
Click to expand...
Click to collapse
Hopefully
Still got 3.0.2....want to go to 3.1 but don't know how without a pc......
Maybe I build TWRP 3.1.1 this week.
Black Manta said:
Maybe I build TWRP 3.1.1 this week.
Click to expand...
Click to collapse
Thanks!
#ApolloLiteProblems said:
Thanks!
Click to expand...
Click to collapse
There is already a new release
#ApolloLiteProblems said:
Thanks!
Click to expand...
Click to collapse
Check the FAQ from madOS. They released it!
Black Manta said:
Check the FAQ from madOS. They released it!
Click to expand...
Click to collapse
Is it for 3.1.1? I just flashed the 3.1 img so it should be fine. Success
---------- Post added at 11:13 AM ---------- Previous post was at 11:11 AM ----------
Black Manta said:
Check the FAQ from madOS. They released it!
Click to expand...
Click to collapse
Can't find the file
I can't unlock the boot loader
Hi, I can't unlock the boot loader. Could someone help me?
I just did it as op instructed.
Kernel version 3.18.22
built version 20170118194258
Many, many thanks
The only difference, I had to use ONLY usb3.
pezmarino said:
Hi, I can't unlock the boot loader. Could someone help me?
Click to expand...
Click to collapse
I didn't need to on mine.
Enjoy the latest beauty with root.
To root your phone using Magisk,
1) Enable "USB Debugging"
2) Install MagiskManager
3) Download patched boot image from https://mega.nz/#!WZhCFIoT!ddpaDe-3XF_Ozj4UIVZkCS2MZ3Si-rEEQ8jSMTwtAHw
[ New Image Provided by @Trissi - Test Required : https://mega.nz/#!YBJ3HYAC!4NSCKVGLveXTgvloj--K_CzghyL33Zd1aGz_2TPRClw ]
4) Run "adb reboot bootloader"
5) Type "fastboot boot NB1_4.88B_Rooted_Magisk.img" from same folder where downloaded that img file. [ Don't FLASH it. It will break your WiFi !!! ]
6) Let it boot, and then Open MagiskManager --> Install --> Direct Install.
Once install is done, reboot normally. And - voila - you have MagiskRooted NOKIA 8 ( NB1 )
P.S: For TWRP based on v4.88B - check https://forum.xda-developers.com/nokia-8/development/unofficial-twrp-based-v4-88b-wifi-t3802333.
If I'm already on a Magisk-rooted TA-1004 (March 1 Security patch), Build 00WW_4_84A_SP01,
do I need to just go through steps 3-5?
(p.s. it won't erase any data on the phone, right?)
1st update to the latest v4.88B . Then follow 1-5
bidhata said:
Enjoy the latest beauty with root.
To root your phone using Magisk,
1) Enable "USB Debugging"
2) Install MagiskManager
3) Download patched boot image from deleted
3) Run "adb reboot bootloader"
4) Type "fastboot boot NB1_4.88B_Rooted_Magisk.img" from same folder where downloaded that img file. [ Don't FLASH it. It will break your WiFi !!! ]
5) Let it boot, and then Open MagiskManager --> Install --> Direct Install.
Once install is done, reboot normally. And - voila - you have MagiskRooted NOKIA 8 ( NB1 )
P.S: Please put hand together for a working TWRP.
Click to expand...
Click to collapse
1
2
3
3
4
5
Nice count :fingers-crossed:
PS: Ty for the boot image
erik128766 said:
1
2
3
3
4
5
Nice count :fingers-crossed:
PS: Ty for the boot image
Click to expand...
Click to collapse
Lol - fixed.
Wifi ok after it action?
And I can install SP w/o error?
head66 said:
Wifi ok after it action?
And I can install SP w/o error?
Click to expand...
Click to collapse
Don't flash it - expected wifi will not work. Rather use it to boot your device from fastboot, then use MagiskManager to patch your own boot partition. Previously SP updated worked well ( SP1 --> SP2 ) . But not sure about future update. Though - we will find-out a way together
Thank you so much.
I have an unlocked bootloader and a root via Magisk. How to prepare the device for updating OTA?
Nice. It work perpectly
bidhata said:
Enjoy the latest beauty with root.
To root your phone using Magisk,
1) Enable "USB Debugging"
2) Install MagiskManager
3) Download patched boot image from https://mega.nz/#!WZhCFIoT!ddpaDe-3XF_Ozj4UIVZkCS2MZ3Si-rEEQ8jSMTwtAHw
4) Run "adb reboot bootloader"
5) Type "fastboot boot NB1_4.88B_Rooted_Magisk.img" from same folder where downloaded that img file. [ Don't FLASH it. It will break your WiFi !!! ]
6) Let it boot, and then Open MagiskManager --> Install --> Direct Install.
Once install is done, reboot normally. And - voila - you have MagiskRooted NOKIA 8 ( NB1 )
P.S: For TWRP based on v4.88B - check https://forum.xda-developers.com/nokia-8/development/unofficial-twrp-based-v4-88b-wifi-t3802333.
Click to expand...
Click to collapse
My device is not detected in CMD for adb devices. I remembered I have installed the driver. Does updating the firmware to latest June Security patch make it undetected? Is there anyone having the latest driver? My phone can't go into bootloader if it can't detect in CMD.
Look under developer settings if USB debugging is on
Powered by View 10
2WildFirE said:
Look under developer settings if USB debugging is on
Powered by View 10
Click to expand...
Click to collapse
It is on of course. Else, why would I ask in here? hehehe
Wifi is broken with 4.88B SP1, how can I downgrade to 4.88B?
On my Device it have work.
But i have the TWRP in the Boot_a. how i can delete this?
chris.aus.at said:
On my Device it have work.
But i have the TWRP in the Boot_a. how i can delete this?
Click to expand...
Click to collapse
OK i have found a way.
If anyone has problem when root 4.88B June Security Patch, or doesn't have Direct Install option, this is what I have done to get rooted:
1. Enable "USB Debugging"
2. Download MagiskManager and Magisk zip, copy to phone but DO NOT install
3. Download patched boot image by @bidhata, copy to adb folder
4. Open CMD from adb folder and run "adb reboot bootloader"
5. Run "fastboot boot NB1_4.88B_Rooted_Magisk.img"
6. Let it boot, you will see wifi is broken (it's ok) and then install MagiskManager --> Add Magisk zip to Module --> Reboot when installation finishes.
After reboot the phone still has root and wifi working normally. Good luck!
hot to fix
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
iyadengle said:
hot to fixView attachment 4539271
Click to expand...
Click to collapse
You must unlock the Bootloader
iyadengle said:
hot to fixView attachment 4539271
Click to expand...
Click to collapse
Pre-Rooted Boot Image for Nokia NB1 v4.88B for Unlocked Nokia 8
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: I AM NOT RESPONSIBLE OF ANY DAMAGE WILL HAPPEN AFTER YOU FLASH THIS TWRP ,
ALWAYS DO BACKUP FIRST
A Warm welcome to All m11 users & lots of Love:highfive:
DOWNLOAD MODE
1. power off your samsung m11
2. press & hold both vol+ & vol- keys and insert USB driver
3. now you are in Download mode
INSTALLING RECOVERY
1. open odin flash tool
2. make sure you are in download mode and USB is connected
4. now you will see Added logs in log Tab
3. click on AP Tab and select TWRP-3.4.0_10-m11q-goldfish07.tar file
4. now click on start & wait for recovery to be flashed .
5. if recovery flashed correctly you see pass message
NOTE: when you see pass message suddenly press and hold vol- key and power
6. Congratulations you are in recovery now
ROOTING SAMSUNG M11 (Android 10)
1. now flash Magisk 20.4.zip
2. after flashing just reboot
3.now your device will boot successfully
4. Congratulations
[NOTE:]
can't mount data & internal storage is 0
1. click wipe in recovery
2 . click on format data type yes and hit return
3. check, you will able to mount data [internal storage]
vbmeta error
1. download vbmeta-goldfish07-Odin-AP.tar
2. flash through odin
3 and reboot to recovery
BUGS
Tell me if you find any:fingers-crossed:
DOWNLOADThanks to :
@TeamWin For the TWRP IMG
Contributors:
goldfish07(Ayush Bisht)
Source: https://github.com/goldfish07
TWRP 3.5.x.x for m11
CLICK HERE
#reserved
I got this FAIL message when ever I tried
beki21 said:
View attachment 5311963I got this FAIL message when ever I tried
Click to expand...
Click to collapse
you are flashing wrong recovery, download from above link
need to download samsung usb drivers/adb and fastboot drivers/sdk-platform tools for that?or just follow your steps? .....please tell...hurry.....
HirukaNU15 said:
need to download samsung usb drivers/adb and fastboot drivers/sdk-platform tools for that?or just follow your steps? .....please tell...hurry.....
Click to expand...
Click to collapse
yes, you need samsung usb driver , if not installed
Sir my phone does not boot after flashing it
It remains in download mode (Samsung m11)
Please reply
Sir
Souvik10 said:
Sir my phone does not boot after flashing it
It remains in download mode (Samsung m11)
Click to expand...
Click to collapse
make a video and send me
Souvik10 said:
Sir my phone does not boot after flashing it
It remains in download mode (Samsung m11)
Click to expand...
Click to collapse
You probably did the wrong steps
Can i use it for M11 having Android 11 and oneui 3.1?
Please help
Hey.bro....thank you..! its working successfully!.....but when i going to flash a zip its saying invalid zip format...any solutions for it...?
4yush5663 said:
TWRP 3.5.x.x for m11
CLICK HERE
Click to expand...
Click to collapse
Sir plz provide samsung m11 custom rom
can i install twrp even if its updated to android 11
C
HirukaNU15 said:
Hey.bro....thank you..! its working successfully!.....but when i going to flash a zip its saying invalid zip format...any solutions for it...?
Click to expand...
Click to collapse
Just download magisk 24 apk then change the apk to zip when it will work
Did you unlock the bootloader? Pls answer
4yush5663 said:
make a video and send me
Click to expand...
Click to collapse
please my samsung m11 is always rebooting to twrp recovery instead of systems and they all passed
joeshua007 said:
please my samsung m11 is always rebooting to twrp recovery instead of systems and they all passed
Click to expand...
Click to collapse
you need to reboot to system from twrp recovery
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: I AM NOT RESPONSIBLE OF ANY DAMAGE WILL HAPPEN AFTER YOU FLASH THIS TWRP ,
ALWAYS DO BACKUP FIRST
A Warm welcome to All m11 users & lots of Love:highfive:
DOWNLOAD MODE
1. power off your samsung m11
2. press & hold both vol+ & vol- keys and insert USB driver
3. now you are in Download mode
INSTALLING RECOVERY
1. open odin flash tool
2. make sure you are in download mode and USB is connected
4. now you will see Added logs in log Tab
3. click on AP Tab and select TWRP-3.5.x.x_10-m11q-goldfish07.tar file
4. now click on start & wait for recovery to be flashed .
5. if recovery flashed correctly you see pass message
NOTE: when you see pass message suddenly press and hold vol- key and power
6. Congratulations you are in recovery now
ROOTING SAMSUNG M11 (Android 10)
1. now flash Magisk 20.4.zip
2. after flashing just reboot
3.now your device will boot successfully
4. Congratulations
[NOTE:]
can't mount data & internal storage is 0
1. click wipe in recovery
2 . click on format data type yes and hit return
3. check, you will able to mount data [internal storage]
vbmeta error
1. download vbmeta-goldfish07-Odin-AP.tar
2. flash through odin
3 and reboot to recovery
BUGS
Tell me if you find any:fingers-crossed:
-Internal may shows 0mb (temp fix go to back up and click refresh sizes )
-Giving prompt "No OS installed when pressing Reboot to system" that a false negative
DOWNLOADThanks to :
@TeamWin For the TWRP IMG
Contributors:
goldfish07(Ayush Bisht)
Source: https://github.com/goldfish07
#reserved
#reserved
Not working:
* recovery loop
* recovery screen touch disabled
salvag said:
Not working:
* recovery loop
* recovery screen touch disabled
Click to expand...
Click to collapse
can you explain me whats not working ?
can you reproduce this error you are facing ?
Hi,
basically what i said:
* i was unable to reboot to system
* i could not enter custom recovery either; the touch screen did not work (the swipe buttom)
I did not try again; I reeinstalled the stock rom and used the magick patch to get root
#reserved
salvag said:
I did not try again; I reeinstalled the stock rom and used the magick patch to get root
Click to expand...
Click to collapse
Yes, it is correct solution!
1. Install a new (latest) firmware /at current moment it is SM-M115F_M115FXXU2BUD9_R(Android 11)_SEK_Factory Rom (5 File)_20210517/.
2. Go to download mode (screenshots in attachment), start Odin, uncheck "Auto Reboot in "Options" and in "AP" put patched file from attachment to this post (magisk_patched-23000_Av3SK.tar).
3. Press start.
4. After finish go to Recovery Mode and run "Wipe data/Factory Reset" and "Wipe cache partition"
5. Reboot.
6. Install Magisk-v23.0.
Enjoy!
N.B. Patched file in attachment work ONLY with firmware that specified above (SM-M115F_M115FXXU2BUD9_R)!!!
@4yush5663
Add support for Android 11 please, it is actualy working on it but with a lot of bugs, mount partitions errors, please add support
TheDevelopper said:
@4yush5663
Add support for Android 11 please, it is actualy working on it but with a lot of bugs, mount partitions errors, please add support
Click to expand...
Click to collapse
send logs if you get error
4yush5663 said:
send logs if you get error
Click to expand...
Click to collapse
It's just based on Android 10
stuck on recovery loop not booting to system despite complete wipe
Tolong solisinya, saya sudan install twrp m11 sukses dengan benar, tapi tidak bisa masuk home screen, cuma tampilan android is not runing, itu bagai mana ??
4yush5663 said:
View attachment 5293887
Note: I AM NOT RESPONSIBLE OF ANY DAMAGE WILL HAPPEN AFTER YOU FLASH THIS TWRP ,
ALWAYS DO BACKUP FIRST
A Warm welcome to All m11 users & lots of Love:highfive:
DOWNLOAD MODE
1. power off your samsung m11
2. press & hold both vol+ & vol- keys and insert USB driver
3. now you are in Download mode
INSTALLING RECOVERY
1. open odin flash tool
2. make sure you are in download mode and USB is connected
4. now you will see Added logs in log Tab
3. click on AP Tab and select TWRP-3.5.x.x_10-m11q-goldfish07.tar file
4. now click on start & wait for recovery to be flashed .
5. if recovery flashed correctly you see pass message
NOTE: when you see pass message suddenly press and hold vol- key and power
6. Congratulations you are in recovery now
ROOTING SAMSUNG M11 (Android 10)
1. now flash Magisk 20.4.zip
2. after flashing just reboot
3.now your device will boot successfully
4. Congratulations
[NOTE:]
can't mount data & internal storage is 0
1. click wipe in recovery
2 . click on format data type yes and hit return
3. check, you will able to mount data [internal storage]
vbmeta error
1. download vbmeta-goldfish07-Odin-AP.tar
2. flash through odin
3 and reboot to recovery
BUGS
Tell me if you find any:fingers-crossed:
-Internal may shows 0mb (temp fix go to back up and click refresh sizes )
-Giving prompt "No OS installed when pressing Reboot to system" that a false negative
DOWNLOADThanks to :
@TeamWin For the TWRP IMG
Contributors:
goldfish07(Ayush Bisht)
Source: https://github.com/goldfish07
Click to expand...
Click to collapse
Can I use it for Android 11 updated M11 ??
Please reply and help.
Hari12a said:
Can I use it for Android 11 updated M11 ??
Please reply and help.
Click to expand...
Click to collapse
i am in currently in Android 10 , yes, you can try installing twrp in android 11
4yush5663 said:
i am in currently in Android 10 , yes, you can try installing twrp in android 11
Click to expand...
Click to collapse
I'm not dare to take risk. will it brick by deviice ? i am a noob .so i am so confused
my device is galaxy M11 on android version 11 UI 3.1.
Jalalludin said:
my device is galaxy M11 on android version 11 UI 3.1.
Click to expand...
Click to collapse
You flashed it??
Yes, I successfully flashed it, but the result is that the phone doesn't work, I've formatted the data and wiped the cache
I downgraded my latest firmware to android 10 stock rom (which had bit security level 2 because i couldn't downgrade to versions with bit security less than 2) to make this work, then I was able to flash the recovery by flashing vbmeta first then tried flashing 3.4.x.x as well as 3.5.x.x twrp recovery... I had a problem with /data partition but it was solved by doing nand erase in odin when flashing stock rom... but anyways I don't know if the problem is with modded twrp or unofficial lineageos cause in both versions of twrp I get stuck in bootloop on the lineageos loading...
Hope this helps anyone who comes here like me...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BlissRoms comes with a wide selection of customization options from around the Android community as well as unique options developed by our team. With so many options available, you’ll find it hard not to enjoy the Blissful experience.
Our focus is to bring the Open Source community a quality OS that can run on all your devices as a daily driver, syncing your apps + settings + customization's across all platforms you run Bliss on.
BlissRoms Download
Code:
[/B][/SIZE][/CENTER]
[SIZE=5][B][CENTER]-Make sure you are on the latest OOS 12
- Dump the BlissROM zipfile through payload_dumper
- flash the partition images with the following commands
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash odm odm.img
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img
- Reboot and #StayBlissful
Create Bug Report on our Issues Tracker
BlissRoms Github
BlissRoms Gerrit
Kernel Source
| Website | Blog | Facebook | Twitter | Instagram | Telegram Group | Telegram Channel | Docs
If someone wants to donate, please do so via this PayPal link
Thank you for using BlissRoms! And as always: #StayBlissful
Notes:Oneplus Cam included but video recoerding is not working. GCam GO is also included.
reserved too
I see the installation process is different than the usual factory wipe from recovery, and then flash zip to both sides. Would this process not work?
jp85041 said:
I see the installation process is different than the usual factory wipe from recovery, and then flash zip to both sides. Would this process not work?
Click to expand...
Click to collapse
There are a couple of ways to flash this rom. The important thing is that you are on the latest OOS 11 on the slot you are going to flash the rom on. One way to flash is to follow the install instructions in the first post or what I like to do is flash it through twrp. The problem is decryption doesn't work so you will have to have the rom image on a flash drive. I always recommend formatting data when the android version changes.
Noob question here. Why is it necessary to get the various img files via payload dumper? Why can't they just be assembled in a rar/zip file? Thanks
I love the ROM, haven't ran Bliss since the OnePlus One iirc, not bad at all. Visible works too so that's a plus. Thank you! Aside from going with something like substratum, is there a way to change accent color? I looked in Themes under Blissify settings but can't find where to change it. The only bugs I have had was the screen not coming back up until clicking power but it was literally one time and only waited 5 seconds to resolve.
Does it have built-in phone recorder
Not by default as far as I have seen, not something I looked into that closely. Fun note, my phone is also a bit glitchy compared to others, so don't take my weird issues as representative of the entire ROM, but if I watch videos that have too loud of a noise and I have my volume turned all the way up, my phone powers down. Happened on the daily dose of internet video where they show a slow motion bolt being cut.
Bliss is one of the best custom roms I have experienced, thanks for beating this titan work to support oneplus 7 pro
New build v16.2
Many new features
Built on OOS 12 firmware
GCam
Download: https://downloads.blissroms.org/media/guacamole/Bliss-v16.2-guacamole-OFFICIAL-gapps-20221226.zip
Rom Changelog: https://blog.blissroms.org/2022-12-06-typhoon-16.2-updates-dec-2022/
Enjoy!
srgrusso said:
There are a couple of ways to flash this rom. The important thing is that you are on the latest OOS 11 on the slot you are going to flash the rom on. One way to flash is to follow the install instructions in the first post or what I like to do is flash it through twrp. The problem is decryption doesn't work so you will have to have the rom image on a flash drive. I always recommend formatting data when the android version changes.
Click to expand...
Click to collapse
Are you sure we need to be on oos11 firmware? Most other A13 roms require A12 firmware
bobbylo said:
Are you sure we need to be on oos11 firmware? Most other A13 roms require A12 firmware
Click to expand...
Click to collapse
A12 Firmware. I flashed a couple days back. Running great.
sfacimma said:
A12 Firmware. I flashed a couple days back. Running great.
Click to expand...
Click to collapse
ok,thanks
bobbylo said:
ok,thanks
Click to expand...
Click to collapse
hey,one more question,How did you flash this,just from the bootloader?Or from the recovery fastboot mode? Thanks
what may be the problem when I use bliss 16.2 in oneplus 7 pro the phone heats up quite a bit and discharges quickly while with other roms everything is normal
bobbylo said:
hey,one more question,How did you flash this,just from the bootloader?Or from the recovery fastboot mode? Thanks
Click to expand...
Click to collapse
Sorry. Didn't see this earlier. Here's what I did......
Extract the boot.img from the payload.bin
From cmd prompt:
adb reboot bootloader
Once in bootloader, and from cmd prompt:
fastboot flash boot boot.img
Reboot to Recovery
--wipe/format (you'll lose all data/pics/files)
--Install via ADB option (I forget the actual option name)
Then, from cmd prompt on PC:
adb sideload Rom_Name.zip
When completed (after sitting at 47% for a while):
--Reboot to System option
Thanks for this Bliss, nice work !
sfacimma said:
A12 Firmware. I flashed a couple days back. Running great.
Click to expand...
Click to collapse
Can you guide me how I should flash oos 12 on both slots? since MSM tool only flashes to one slot
Obnomus said:
how I should flash oos 12 on both slots?
Click to expand...
Click to collapse
Go to crDroid 13 thread, it says in red text where to get the tool for flashing 12 firmware in both slots.