Database Info

Question how to bye pass organisation know security

Got this brand new A 32 5g phone. when i try to set it up it says that my organisation can control my device with knox cloud security, it does allow only limited apps via the google play store.
Is there any way to disable this and use your own Samsung account to sign and to restore this from an old backup.
many thanks
PS Just reading about Samsung Frp2020 , will this app help me to bypass

After seeing a youtube video, i have tried the Samsung Frp and use addrom, it allows me to restore from an old back up.
but when i go back it again takes me to the Knox page and asks me to enter my work email address and use ADFS seetings.
can some one help me please.
this is a new phone with no passwords setup currently.
I have done this 3 times and when i dont enter any details in the Knox and keep pressing the back up it gives the option to reset the phone and when i reset the phone i am back at square one.

i have just seen that it has intune security embedded into the phone. it activates when i am setting up the phone from scratch and wants me to add wifi to complete the setup
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Microsoft Intune to Bypass MFA

then it takes to the device setup methods which states EMM provider (enterprise mobility management (EMM) provider).
here are some pics for you to have a look.
after taking you the organisation sign in page if you dont put the correct credentials and put any other account detials it doesnot accept this and i have the option to restore the device which sets it back to factory reset.

Hey.
Did you ever find a solution to this?
I have pretty much exactly the same problem with a Samsung Tab S6 Lite and have yet to find a solution that works. Used Odin to flash new firmware and made no difference at all. The Microsoft sign in requirement via Knox Cloud Enrolment is still very much there.
All the articles and software I've found online seem only to relate to bypassing FRP (factory reset prevention) for a Google account.
???

[APP] Blue2Hotspot - Turn on the hotspot when connected to a Bluetooth device

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Blue2Hotspot is a program for automatically turning on an access point (Hotspot) when connected to certain Bluetooch devices.
Languages: English, Russian (translation planned)
It happens that you get tired of doing the same thing and constantly get into the car, look for your phone, turn on the access point, and so on every day. I decided to write a small application to automate these actions. To enable the access point, you need permission - location (I myself think this is nonsense). The program does not write your data or send it anywhere. All other permissions are needed to keep Android from being unloaded from the system.
Some water. Since the parents bought a car and there is a large screen, you can launch the navigator and all sorts of online services, but how to turn on the access point turned out to be more difficult to teach, since a couple of weeks will pass and the call "how to turn on Wi-Fi". And I decided to write a small application.
Instructions
Make pairing with Bluetooth and Wifi device.
Install Blue2Hotspot, give permission.
Make settings and select your Bluetooth device.
Click on the Start service button
That's it, the service will work on this; now, when connected to the device, the access point will turn on.
Homepage: https://inceptive.ru/projects/blue2hotspot/
Spoiler: Screenshot
Spoiler: Changelog
0.3
Android 12 support
Correction of jambs
Corrected the view
English translation
0.2
Corrected the end of the service when disconnecting a Bluetooth device
Corrected the view
Added information on "activity control" for Huawei, Xiaomi and OPPO.
Correction of minor bugs.
0.1
Optimized work
Made the access point turn on when connecting Bluetooth
Auto start on phone restart.

What is the speed that one can expect?

Thanks for the very useful app, that works very well. I tried a couple of others before finding this that didn't work.
Would it be possible to select multiple BT devices so that it could be used in more than one car?

After using Blue2Hotspot for a couple of weeks I'm an absolute fan of it. Annexhack, you have programmed a really useful program, easy to handle for beginners too. I second the requst from kk131 and add: I'd like to donate a beer to you, let us know how to do. Thanks
Bye for now Fred

Question Google pay doesn't show up on the payment list

Hi you all!
I've seen a couple of posts about gpay issues already but haven't found any about this one. I've bought my Galaxy Watch 4 BT version a couple of days ago and install gpay on it, I was able to add card, do the verification but then it asked me to set it as default payment and when I opened NFC setting the Gpay just simply not showing there like below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried a couple of things:
- I restarted my watch/reinstalled the app/cleared cache for wearable app and gpay
- I disabled samsung pay through adb
- I installed older version of GPay using adb
Neither of those options worked, I was the closest with the last one, when I installed older version it did ask me to set it as default but I was able to dismiss the pop up and I was able to see my added card (the payment didn't work at store though) and weird thing happend after some time, when I opened the app again I got message like this
which doesn't seem right cause I'm using GPay constantly on my phone plus it allowed me to download the app from the store (on the watch) and add the card :|
Has anyone experienced the same issue and have some suggestions what else I could do to make it work?
Some devices detail:
Phone: Samsung Galaxy A7
Watch: Galaxy Watch 4 (Bluetooth version)
- Software version: R870XXU1EVA8
- System version: 11
- Wear OS version: 3.2
Versions of GPay app I tried on my watch:
- 2.141.414039067
- 2.137.401329300
- 2.135.389276953
- 2.72.209520801

Hey,
I have the exact same problem with my Galaxy Watch 4 LTE.
Already contacted Google, but they're blaming Samsung.
Paying seems to be a nightmare with this watch, until yesterday it wasn't even possible to add new cards. Now you can add cards, but can't select the app in the NFC settings...
At least I havent gotten the "not launched" notification yet.
There's also a thread in the Samsung community: https://eu.community.samsung.com/t5/wearables/google-pay-on-galaxy-watch-4-not-working/m-p/4373741

Hi!
Thanks for the reply and for sharing the link! I tried this yesterday https://forum.xda-developers.com/posts/85581263/ and it worked but today morning somehow my watch got unpaired from my phone and I had to do reset and configure everything from the beginning so I guess wasn't worth it after I reset my phone tho and I change the location seems like I'm able to install the app from the google pay and use the app but it got disabled all the time for some reason

Question Google assistant is finally available.....and I can't set it up

I have downloaded it and it's searching for my watch and it can't find it. I did factory reset and still nothing
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Watch "Samsung Galaxy Watch 4: OFFICIAL GOOGLE ASSISTANT UPDATE" on YouTube

rogerandgina06 said:
Watch "Samsung Galaxy Watch 4: OFFICIAL GOOGLE ASSISTANT UPDATE" on YouTube
Click to expand...
Click to collapse
that's no help. it gets stuck at the set up

Uninstall and then reinstall then... I mean that's what I would try doing. Just trying to help. Some people don't appreciate anything anymore.

It works now, I dunno what changed but I just tried again for like the 20th time and it finally worked

Glad to hear.

Im having the same problem, i tried more that 20 times.
"Couldnt connect to your watch".

Same problem here.
Restarts don't help, reinstalling assistant (watch and phone) doesn't help, and clearing cache for assistant and Google app doesn't help

After i factory reset my watch, the setup went smoothly on the first try.

This worked

I also had to factory reset and it didnt set work on the first attempt

Could be due to your geographic location?

Try doing this.....

devils avocado.....
why couldnt this question be answered in an existing thread (of which there are 5 already of which the best palce was arguably "Official Google Assistant For GW4 Available")....was creating yet another thread on a hot topic thereby diluting discussion on the existing ones, where no doubt the issue would come up, really the best idea?
creating an entire new thread just because maybe youre in a hurry feeling FOMO and want immediate answers is possibly/maybe/arguably kinda selfish

Apparently it will not work on Android 11 below ,Well this is Bull* by Google, they are forcing you to be on Android 11 for it to work

captsingh787 said:
Apparently it will not work on Android 11 below ,Well this is Bull* by Google, they are forcing you to be on Android 11 for it to work
Click to expand...
Click to collapse
Well, I'm on android 9 and it worked perfectly fine for me.

PX30 dongle locked down

Hi, maybe somebody can help me a bit, just hope I post in the right forum. I have a C5 wireless dongle with a PX30 (RK3326-S) chip. Problem is, device is working perfectly except, that Google Assistant voice is cut (navi and music works perfectly). I already was in contact with their support, they send me an APK to change the Output from Google Assistant from phone call to music, but also didn't help. By the way, that's was the only APK I could install, all others will fail, see below.
So I wanted to try to install Headunit reloaded but regardless if tried via Play Store or direct, installation fails. That's the same for every other programm I tried (app not installed, regardless if via Play Store or direct).
I then thought, give it a try to disable USB Audio routing in developer options, but it's not possible to enable developer options the standard way. I the read that using "adbon" in factory settings menu should maybe enable Developer options, but when using that, device restarts, but the screen of the car stays blank. When using the root command (*#hct#root#) gives just a "wrong password" error. When using m123456, I can at least enter the additional settings, but that doesn't help here.
So I really would like to have a ROM where I can install my own Apps on, so if somebody could point me in the right direction, it would be great. Following thinks to take into consideration from my point of view:
1. as it's just a Dongle, up to now I only can get a graphical output in the car itself
2. on current ROM not possible to install additional apps (the one I got from manufacture support was the only exception)
3. even if it's possible to install another ROM, as it's not a Head unit, but just a Dongle, I would also need he programms for mirroring to Car screen (also I'm not new to rooting etc, I have no clue about this Dongles) - is this included in the MCU?
This C5 device seems to be sold under different brands, see 2 links below, attached also 3 Fotos from the board and current Software.
https://herilary.com/pages/如何操作
https://www.amazon.de/Carplay-Funkt...TmFtZT1zcF9waG9uZV9zZWFyY2hfdGhlbWF0aWM&psc=1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}