Bluetooth connection abort in standby - General Questions and Answers

Hi there,
I'm using my old Nexus 5 for navigation. Each time when the phone is going to standby, the bluetooth connection (tethering by another phone) get lost.
Is there a solution to avoid this?

Bluetooth timeout is one of the most common reasons Bluetooth is turned off without warning. By default, after about 10 minutes of being idle, your device will usually go into "standby" mode to conserve power. This turns the screen off and removes certain connections, like Bluetooth.

Is there anybody possibility to change the timeout? I can't find this option in developers options.

Guaranteed not to be found under Developer Options.
Not all devices will let you control when your Bluetooth turns itself off automatically.
Every smartphone or device is different when it comes to setting Bluetooth connections and connectivity preferences. You can usually find instructions on how to alter your Bluetooth online by searching for your phone model.

Related

[Q] Q - wifi takes precedence over mobile network?

Hi, I'm new to android, but tech aware. Not sure if this is android or Sensation (I'm on XE with thanks to Mike1986).
I use WiFi a lot, but also wander. I tend to forget to turn off the WiFi when I leave work/home/pub - not top of my list!
Whilst I'm wandering I often try to look something up, when WiFi's scanning, and wait for ages.
Shouldn't the 'system' failover to phone data access if WiFi is not connected - or at least ask me for an action?
As I say, I'm new to this - apologies.
Thanks
yes, it should fail over to data if it is not connected to WIFI.
Correct. If you have wifi enabled, leave the area like to work that has no wifi, then yes mobile network takes over.
But I go one above and use Llama location profiles. Where depending where are based on the conditions you set, you can trigger actions using this app. The app is free in the market and is an invaluable tool for me when I am leaving work, heading to the car with my bt and gets connected because I set my condition to look for a bt device if I am no longer connected to my wifi at work.
Gotta love Android
Hmmm. That's not the behaviour I'm seeing. Just thought it was an irritation. Should failover be auto or is there settings (or apps) to control it? I like the concept of profiles ... But you've got to be more organised than I!
nightjar56 said:
Hmmm. That's not the behaviour I'm seeing. Just thought it was an irritation. Should failover be auto or is there settings (or apps) to control it? I like the concept of profiles ... But you've got to be more organised than I!
Click to expand...
Click to collapse
It's auto. Like my n1, whenever I am in range of a known wifi connection, the wifi will auto connect if wifi was left on from the prior location or out of range and back again, if that makes sense lol...
So if you go out and are out of wifi range, and you manually turn off wifi, then no wifi won't auto connect of course.
Yes, that all works fine - when I'm wandering in and out of wifi zones. My gripe/question is :
When I am out of wifi range, and wifi is on (scanning), should the phone fall back to the phone data connection? The behaviour I see is that connecting just hangs until I turn wifi off.
Thanks

Wifi stops working after being left for a while (still connected)

Having an issue with the Tab 2 where you go to pick it up and start browsing after it has been sitting around a while (not sure if the time matters, but it seems like after sitting for most of the day) and the wifi is still connected, but nothing works than needs data. It acts like it would if you had not internet connection. Toggling the wifi off and on will fix the issue and notificaitons and emails start pouring in.
Anyone else have this problem? I found a similar issue on the 7.7 forums but nobody reported a solution and I am not even sure if it would have worked on the Tab 2 anyways. I am thinking about making a script that toggles the wifi automatically if it detects it can't connect to the internet. But that is a little ridiculous needing to do that. It shouldn't be losing connection in the first place.
Hi Pirate
it's a bit depending on the ROM you have installed - but since Android 4 you have a quite reliable setting. The default behavior of Android devices is to deactivate the wifi connection when it goes to sleep.
Some ROMs don't recognize the disconnection and the switch/button still shows "Wifi on" although disconnected.
First step: go to settings / wifi settings, hit the menu button (top right three dots) and check the advanced settings.
Somewhat like "Keep WLAN active in standby" - set this to always.
That should solve it already under android 4.x
If this doesn't help, look into Play Store - search for "wifi keep alive". But for the SGT 2 you shouldn't need it
Greetz - Chris
It was already set to "Always" so I don't think that will help. I will look at that app to see what it does.
Sent from my Nexus 7 using Tapatalk HD
wifi turns off when not in use to save battery. I think it might be a default even if you have it set to always on.
guncrasher said:
wifi turns off when not in use to save battery. I think it might be a default even if you have it set to always on.
Click to expand...
Click to collapse
The problem is that it never comes back on. Well it shows the wifi icon and the signal and everything but it just doesn't have any data connection. Any apps that use data act like wifi is off. The only way to get it to start working again is to toggle wifi or reboot. I also forgot to mention it is the stock ROM, only rooted. It got the OTA a few days ago too and it has happened since then.
You're not alone
Skurvy_Pirate said:
Having an issue with the Tab 2 where you go to pick it up and start browsing after it has been sitting around a while (not sure if the time matters, but it seems like after sitting for most of the day) and the wifi is still connected, but nothing works than needs data. It acts like it would if you had not internet connection. Toggling the wifi off and on will fix the issue and notificaitons and emails start pouring in.
Anyone else have this problem? I found a similar issue on the 7.7 forums but nobody reported a solution and I am not even sure if it would have worked on the Tab 2 anyways. I am thinking about making a script that toggles the wifi automatically if it detects it can't connect to the internet. But that is a little ridiculous needing to do that. It shouldn't be losing connection in the first place.
Click to expand...
Click to collapse
It's the same effing stuff people suggest to every wifi glitch out there.
To people who think it's due to the wifi sleep policy: although I've set it to always, why would wifi not resume, after screen is turned on? It's not the wifi that gets disconnected, it's the internet (or the download speed) that stops working.
To people who suggest it's a power saving feature under low battery conditions: Sorry, I've tested it while charging and with full battery.
To people with the above two arguments: Connection to some routers works perfect with the phone. Like when I turn on the hotspot on another phone, the wifi works great. Also, wifi on the other phone from the same source (laptop used as internet access point) works well.
To people who suggest resetting the router or wifi on phone: The internet does start working again, but only for a few minutes. Even if the screen is turned on, the internet may stop working mid-download.
The actual situation is that the phone disconnects from the internet, but keeps showing a connection to wifi. Like I used connectify hotspot to create an access point, and after a few minutes, the phone moved from "connected clients" list to the "previously connected clients", even as the phone showed connected to wifi with even the download arrows blinking, but no internet (or download speed). This only happens with certain sources (of wifi). And other phones may work well with the same source.
I have tried (several times and in different orders and permutations) the following to no effect:
1. Resetting the router.
2. Resetting the wifi on laptop.
3. Resetting the wifi on phone.
4. Restarting the phone and laptop.
5. Static IPs, gateways and DNSs. (Even though the problem was not with connecting to wifi and even internet works momentarily after resetting wifi).
6. Turning off items controlling wireless network in wireless connection properties.
7. Turning off firewall.
Waiting for a savior.
I know this isn't super helpful but I had the same bug you describe on the previous version of carbon. When I updated to the latest it seems to have stopped.
Sent from my GT-p5113 using xda premium
I had similar issue with my aTab Phone 4 and TP-Link TL-WR941ND (OpenWRT)
After disabling WMM capability in the router the problem disappeared!
Change router lease time to "2weeks"
Sent from my GT-I8190N using XDA Premium 4 mobile app
Same issue.
karankahlon said:
It's the same effing stuff people suggest to every wifi glitch out there.
To people who think it's due to the wifi sleep policy: although I've set it to always, why would wifi not resume, after screen is turned on? It's not the wifi that gets disconnected, it's the internet (or the download speed) that stops working.
To people who suggest it's a power saving feature under low battery conditions: Sorry, I've tested it while charging and with full battery.
To people with the above two arguments: Connection to some routers works perfect with the phone. Like when I turn on the hotspot on another phone, the wifi works great. Also, wifi on the other phone from the same source (laptop used as internet access point) works well.
To people who suggest resetting the router or wifi on phone: The internet does start working again, but only for a few minutes. Even if the screen is turned on, the internet may stop working mid-download.
The actual situation is that the phone disconnects from the internet, but keeps showing a connection to wifi. Like I used connectify hotspot to create an access point, and after a few minutes, the phone moved from "connected clients" list to the "previously connected clients", even as the phone showed connected to wifi with even the download arrows blinking, but no internet (or download speed). This only happens with certain sources (of wifi). And other phones may work well with the same source.
I have tried (several times and in different orders and permutations) the following to no effect:
1. Resetting the router.
2. Resetting the wifi on laptop.
3. Resetting the wifi on phone.
4. Restarting the phone and laptop.
5. Static IPs, gateways and DNSs. (Even though the problem was not with connecting to wifi and even internet works momentarily after resetting wifi).
6. Turning off items controlling wireless network in wireless connection properties.
7. Turning off firewall.
Waiting for a savior.
Click to expand...
Click to collapse
Same issue. also using connectify and also tried all things you have described. If you find any solution please let me know.
I had the same problem on my Huawei Honor. You need to set static IP in wifi settings (when connecting to AP, press "show advanced settings").
Mine settings were:
IP adress: 192.168.1.75 (make sure other devices are not connected with this IP)
Gateway: 192.168.1.254 (it could be different. Use the same as you're using to connect to your router)
Network prefix length: 24
DNS 1: 8.8.8.8
DNS 2: 4.4.4.4
No option for static IP in connectify
jopsinas said:
I had the same problem on my Huawei Honor. You need to set static IP in wifi settings (when connecting to AP, press "show advanced settings").
Mine settings were:
IP adress: 192.168.1.75 (make sure other devices are not connected with this IP)
Gateway: 192.168.1.254 (it could be different. Use the same as you're using to connect to your router)
Network prefix length: 24
DNS 1: 8.8.8.8
DNS 2: 4.4.4.4
Click to expand...
Click to collapse
There is no option in connectify for static IP and in USB wifi dongle also there is no option to set static IP.
Help!
---
---
Same issue
karankahlon said:
It's the same effing stuff people suggest to every wifi glitch out there.
To people who think it's due to the wifi sleep policy: although I've set it to always, why would wifi not resume, after screen is turned on? It's not the wifi that gets disconnected, it's the internet (or the download speed) that stops working.
To people who suggest it's a power saving feature under low battery conditions: Sorry, I've tested it while charging and with full battery.
To people with the above two arguments: Connection to some routers works perfect with the phone. Like when I turn on the hotspot on another phone, the wifi works great. Also, wifi on the other phone from the same source (laptop used as internet access point) works well.
To people who suggest resetting the router or wifi on phone: The internet does start working again, but only for a few minutes. Even if the screen is turned on, the internet may stop working mid-download.
The actual situation is that the phone disconnects from the internet, but keeps showing a connection to wifi. Like I used connectify hotspot to create an access point, and after a few minutes, the phone moved from "connected clients" list to the "previously connected clients", even as the phone showed connected to wifi with even the download arrows blinking, but no internet (or download speed). This only happens with certain sources (of wifi). And other phones may work well with the same source.
I have tried (several times and in different orders and permutations) the following to no effect:
1. Resetting the router.
2. Resetting the wifi on laptop.
3. Resetting the wifi on phone.
4. Restarting the phone and laptop.
5. Static IPs, gateways and DNSs. (Even though the problem was not with connecting to wifi and even internet works momentarily after resetting wifi).
6. Turning off items controlling wireless network in wireless connection properties.
7. Turning off firewall.
Waiting for a savior.
Click to expand...
Click to collapse
1. I have had the exact same issue for (atleast) the past 2 years. Have survived by repeatedly turning wifi on and off.
2. I too use connectify. This issue doesnt seem to happen on every wifi connection (just like your case). Even more specifically, it seems to happen ONLY when I connect my phone to the hotspot created via my laptop (connectify).
3. Even when the internet is actually working, some apps do not seem to recognise that(take some time to realize it is working), while others are able to connect instantly. Specifially, whatsapp is unable to send/receive messages for about 1-2 mins, after which I receive a whole bunch of messages at once.
This does not seem to be an issue due to connectify as well. I have tried creating a hotspot from my laptop without using connectify as well, but unfortunately, nothing changed. Further, this does not happen when my phone connects to a hotspot created via connectify by some other pc. The wifi and internet work perfectly fine when connected to a hotspot created via my friends computer.
Further, this problem happens only when a mobile connects to the hotspot. Doesn't occur when another laptop/PC connects (not sure about tablets).
I have looked into every nook and cranny on the internet, explored every forum for any working solution, but have been unsuccessful. In fact, this is the first place where I saw the exact same problem as mine, and was wondering if you have found any solution to it .
karankahlon said:
It's the same effing stuff people suggest to every wifi glitch out there.
To people who think it's due to the wifi sleep policy: although I've set it to always, why would wifi not resume, after screen is turned on? It's not the wifi that gets disconnected, it's the internet (or the download speed) that stops working.
To people who suggest it's a power saving feature under low battery conditions: Sorry, I've tested it while charging and with full battery.
To people with the above two arguments: Connection to some routers works perfect with the phone. Like when I turn on the hotspot on another phone, the wifi works great. Also, wifi on the other phone from the same source (laptop used as internet access point) works well.
To people who suggest resetting the router or wifi on phone: The internet does start working again, but only for a few minutes. Even if the screen is turned on, the internet may stop working mid-download.
The actual situation is that the phone disconnects from the internet, but keeps showing a connection to wifi. Like I used connectify hotspot to create an access point, and after a few minutes, the phone moved from "connected clients" list to the "previously connected clients", even as the phone showed connected to wifi with even the download arrows blinking, but no internet (or download speed). This only happens with certain sources (of wifi). And other phones may work well with the same source.
I have tried (several times and in different orders and permutations) the following to no effect:
1. Resetting the router.
2. Resetting the wifi on laptop.
3. Resetting the wifi on phone.
4. Restarting the phone and laptop.
5. Static IPs, gateways and DNSs. (Even though the problem was not with connecting to wifi and even internet works momentarily after resetting wifi).
6. Turning off items controlling wireless network in wireless connection properties.
7. Turning off firewall.
Waiting for a savior.
Click to expand...
Click to collapse
I'm having the exact same prob on my ZTE Grand x V 970
It started when i had kitkat and i couldnt even "fix it" restarting the wifi, i had to reset the phone in order to have my wifi work for like 2-5 mins and then stops recieving data, tried to reconnect and stays on turning on wifi.. Now i changed to the stock Rom and the problem is still there but at least now i can "fix it" restarting the wifi connection until certain point.
Issue sharing internet with Connectify from PC
Go to:
Control Panel\Network and Internet\Network and Sharing Center
On the left column, click on CHANGE ADAPTER SETTINGS.
You should be in: Control Panel\Network and Internet\Network Connections by now.
Then click on: Microsoft Virtual Miniport Adapter and click on Properties, then click on the 'Configure' button in the 'Networking' tab. From this window, go to the 'Power Management' tab and uncheck 'Allow the computer to turn off this device to save power'.
This works for me. Try this out
If this doesn't work further, you can try out mHotspot for the same purpose.
I've had the same issue, with the wifi saying it's connected even though it isn't.
This thread is 4 years old and this issue still hasn't been fixed. What a shame.
Same issue here on OnePlus 3 even after factory reset.
I have this same problem after the security patch Mid March to Jan 1, 2019. The WIFI doesn't show in the top status bar, but toggling wifi off/on fixes it till the next overnight. I did make one change to my wireless about that same time and that was moving the min connect speed from 6Mbps to 12Mbps to help with bandwidth issues being cause by devices using low speeds and having several SSID broadcast. My S7 and Tab A both work fine - so I think it was something in the security patch.

Turn hotspot off after 0 devices connected for 3 minutes?

I want to set up an nfc tag to turn on hotspot for my car head unit to connect to, and then when i turn my car (and head unit) off and get out of my car, I want my phone's hotspot to be turned off, and wi-fi re-enabled (After a 3 minute delay).
I believe this could be done with a check for 0 devices connected to hotspot, and then a delay, before turning off hotspot and turning on wi-fi. I think tasker could do this once provided with the proper parameters, but maybe another app would be better, anyone have any ideas?

Stop watch from getting Location from Phone, without turning off Bluetooth

I've noticed that if my watch is connected to my phone via bluetooth, it will try to get location data from the phone rather than the watche's own GPS.
Under normal circumstances that's not a problem, however when I go hiking, I keep my phone in my backpack and it loses the GPS signal. That means the watch also loses location data and no longer properly tracks the hike (or any other activity where the phone might not have a GPS signal).
Is there a way to force the watch to use its own GPS even when bluetooth is on?
Turning off bluetooth on the watch fixes this of course, but then I no longer get notifications of text messages coming in while my phone is not easily accessible, which is kind of the point of the watch in the first place.
Maybe turning Off Location on phone ?

How to stop Bluetooth Visibility or Discoverability?

I had an unpleasant experience with location tracking that I have described here.
Thinking about it, Bluetooth appears to be one culprit. My Galaxy Watch remains connected to my phone at all times over Bluetooth. So turning OFF the Bluetooth will disconnect the watch from my phone.
These are my current settings:
1. Under Location settings, WiFi Scanning and Bluetooth scanning are both OFF.
2. Nearby Device Scanning is OFF.
3. Ultra-Wideband (UWB) is OFF.
4. NFC is OFF.
5. Location is ON.
Under Android settings, I don't see the option to turn OFF device visibility or discoverability. This results in my phone constantly giving away it's presence to Bluetooth Beacons that are installed by several establishments.
I don't want to turn OFF my phone Bluetooth, but I want to stop it from constantly searching for other devices or appearing on scans from other devices. Once my phone is connected to my watch (or earphones), it should stop scanning for other devices, and also stop being discoverable.
Is this possible?
Same problem here. I don't want to turn Bluetooth off, however I also don't want to show the whole world that my device is in the room. It seems that all options regarding visibility or discoverability are hidden now. :-(
taffit said:
Same problem here. I don't want to turn Bluetooth off, however I also don't want to show the whole world that my device is in the room. It seems that all options regarding visibility or discoverability are hidden now. :-(
Click to expand...
Click to collapse
I think they have been removed, not just hidden. I can't find any activity, including hidden ones, that allows for disabling device visibility.

Categories

Resources