Related
Hi, I've got the 6045Y model which I've been trying to install twrp on, but I can't unlock the bootloader; it says oem unlock is not allowed.
I've tried on os x and linux with sudo but it's the same on both sides. As my phone isn't carrier locked, I don't understand why it's not allowing me to unlock the bootloader. There's also no oem unlock option in the developer options.
Any help?
You must do something wrong?
Can you trY with Windows
You need Alcatel Drivers+Minimal Adb and Fastboot
connect device you must enable debugging and then
-type "adb reboot-bootloader" to reboot into bootloader. The device should reboot to the screen showing "alcatel onetouch...powered by android". This is bootloader mode.
-Then type "fastboot -i 0x1bbb devices" should show some numbers and "fastboot" after the numbers
-Type "fastboot -i 0x1bbb oem device-info" shows device info including bootloader status (e.g. locked).
-Type "fastboot -i 0x1bbb oem unlock" to unlock the bootloader; after this you should get, for device info,
-Type "fastboot -i 0x1bbb oem device-info" and you should see "Device unlocked: true"
-To reboot normally: "fastboot -i 0x1bbb reboot"
Alek Dev said:
You must do something wrong?
Can you trY with Windows
You need Alcatel Drivers+Minimal Adb and Fastboot
connect device you must enable debugging and then
-type "adb reboot-bootloader" to reboot into bootloader. The device should reboot to the screen showing "alcatel onetouch...powered by android". This is bootloader mode.
-Then type "fastboot -i 0x1bbb devices" should show some numbers and "fastboot" after the numbers
-Type "fastboot -i 0x1bbb oem device-info" shows device info including bootloader status (e.g. locked).
-Type "fastboot -i 0x1bbb oem unlock" to unlock the bootloader; after this you should get, for device info,
-Type "fastboot -i 0x1bbb oem device-info" and you should see "Device unlocked: true"
-To reboot normally: "fastboot -i 0x1bbb reboot"
Click to expand...
Click to collapse
I tried on windows just now and the same thing happened: "FAILED (remote: oem unlock is not allowed)". I should mention though, I flashed twrp before unlocking the bootloader. I wonder if this is what's causing the problem.
I dont remember if this option was there, but you can try. Go into Settings/About Phone, scroll down and click on “build number” continuously until you see a toast notification telling you that you've enabled Developer Options. Go back to your Settings menu and enter Developer Options, scroll down and click on the “Enable OEM Unlock” checkbox, also make sure you enable USB Debugging while you're in the Developer Options menu.
DallasCZ said:
I dont remember if this option was there, but you can try. Go into Settings/About Phone, scroll down and click on “build number” continuously until you see a toast notification telling you that you've enabled Developer Options. Go back to your Settings menu and enter Developer Options, scroll down and click on the “Enable OEM Unlock” checkbox, also make sure you enable USB Debugging while you're in the Developer Options menu.
Click to expand...
Click to collapse
I have the same problem an update was pushed to the UK version last week 6045Y 5.0.2 -010 02 now unable to unlock bootloader i tried everything, so the bootloader must of changed BTW the update was about 458mb.
aradalien said:
I have the same problem an update was pushed to the UK version last week 6045Y 5.0.2 -010 02 now unable to unlock bootloader i tried everything, so the bootloader must of changed BTW the update was about 458mb.
Click to expand...
Click to collapse
same here in the uk have same version and cannot unlock bootloader anyone been sucssesful
aradalien said:
I have the same problem an update was pushed to the UK version last week 6045Y 5.0.2 -010 02 now unable to unlock bootloader i tried everything, so the bootloader must of changed BTW the update was about 458mb.
Click to expand...
Click to collapse
Same problem with same UK model and installed that patch too. I managed to flash TWRP and install PAC ROM still bootloader claims to be locked.
fastboot -i 0x1bbb oem unlock
FAILED (remote: oem unlock is not allowed)
fastboot -i 0x1bbb oem device-info
(bootloader) Device tempered:false
(bootloader) Device Unlock:false
easiest way is to download stock firmware with flsh tool for panasonic eluga switch (rebranded idol3),. Flash it with using the included flash tool. then unlock bootloader. Then use mobile upgrade Q 5.0.6 to go back to stock. And you are on stock uk firmware with unlocked bootloader.
I flashed someone's stock 6045Y(Europe) Firmware: 5.0.2-010 03 but couldn't unlock it either. After that I flashed 6045-i806-DCZ. I was really surpriced it let me do that while claiming to be locked and untempered. After that I did factory reset and flashed PAC-ROM. I'm not sure why should I bother to unlock bootloader if I already have TWRP and PAC-ROM flashed. I've no idea how can I even flash rom's with locked bootloader? Maybe oem device-info is bugged.
Anyways I download panasonic eluga switch firmwire, gonna test it after taking backups.
Reippi said:
I flashed someone's stock 6045Y(Europe) Firmware: 5.0.2-010 03 but couldn't unlock it either. After that I flashed 6045-i806-DCZ. I was really surpriced it let me do that while claiming to be locked and untempered. After that I did factory reset and flashed PAC-ROM. I'm not sure why should I bother to unlock bootloader if I already have TWRP and PAC-ROM flashed. I've no idea how can I even flash rom's with locked bootloader? Maybe oem device-info is bugged.
Anyways I download panasonic eluga switch firmwire, gonna test it after taking backups.
Click to expand...
Click to collapse
the Panasonic firmware flash also the aboot partition which has bootloader unlock enabled. without unlocked bootloader you could end with bricked device and the only solution is mobile upgrade q.
I did as you said and finally got bootloader unlocked, yey! Hopefully I don't have to go thought that process anytime soon. Thanks and thumps up!
Reippi said:
I did as you said and finally got bootloader unlocked, yey! Hopefully I don't have to go thought that process anytime soon. Thanks and thumps up!
Click to expand...
Click to collapse
no, its permanent.
I try to unlock my bootloader but two problems : oem unlock is not allowed and eluga sotware stuck at 2 %!!! I want install MM and I have stock rom can install the same the MM upgrade without unlock the bootloader? Regards
camelotto said:
I try to unlock my bootloader but two problems : oem unlock is not allowed and eluga sotware stuck at 2 %!!! I want install MM and I have stock rom can install the same the MM upgrade without unlock the bootloader? Regards
Click to expand...
Click to collapse
1-You didnt wrote phch model do you have.
2-newer heard of this issue . Install the drivers from the eluga firmware app, reboot, turn off your device, connect device to computer, run the download form the eluga firmware app.
jlocohustler said:
I tried on windows just now and the same thing happened: "FAILED (remote: oem unlock is not allowed)". I should mention though, I flashed twrp before unlocking the bootloader. I wonder if this is what's causing the problem.
Click to expand...
Click to collapse
And do you have sucess in flash? It worked? Do you have TWRP????
---------- Post added at 10:34 AM ---------- Previous post was at 10:30 AM ----------
Reippi said:
I flashed someone's stock 6045Y(Europe) Firmware: 5.0.2-010 03 but couldn't unlock it either. After that I flashed 6045-i806-DCZ. I was really surpriced it let me do that while claiming to be locked and untempered. After that I did factory reset and flashed PAC-ROM. I'm not sure why should I bother to unlock bootloader if I already have TWRP and PAC-ROM flashed. I've no idea how can I even flash rom's with locked bootloader? Maybe oem device-info is bugged.
Anyways I download panasonic eluga switch firmwire, gonna test it after taking backups.
Click to expand...
Click to collapse
That is the point from my previouse question! If you flash TWRP, your bootloader is unlocked by default!
persona78 said:
And do you have sucess in flash? It worked? Do you have TWRP????
---------- Post added at 10:34 AM ---------- Previous post was at 10:30 AM ----------
That is the point from my previouse question! If you flash TWRP, your bootloader is unlocked by default!
Click to expand...
Click to collapse
After flashing panasonic rom, you have unlockable bootloader.
Look here
http://forum.xda-developers.com/idol-3/general/guide-repair-idol-3-t3372076
I have 6045Y and panasonic rom work!
fastboot is detecting device but oem unlock/flashing unlock command not working.
I think that command has been changed since this june month security patch.
yash_rathore25 said:
fastboot is detecting device but oem unlock/flashing unlock command not working.
I think that command has been changed since this june month security patch.
Click to expand...
Click to collapse
It looks like MM update dont include aboot with commands for unlocking bootloader. You have to use mobile upgrade Q PC aPP, or Panasonic eluga firmware flash tool (for 6045Y) to go back to 5.0.2. Then unlock bootloader, and flash update to MM (or when on panasonic firmware youhave to use mobile upgrade Q to go back to stock). When on stock, wat for OTA MM or flash MM from XDA thread.
DallasCZ said:
It looks like MM update dont include aboot with commands for unlocking bootloader. You have to use mobile upgrade Q PC aPP, or Panasonic eluga firmware flash tool (for 6045Y) to go back to 5.0.2. Then unlock bootloader, and flash update to MM (or when on panasonic firmware youhave to use mobile upgrade Q to go back to stock). When on stock, wat for OTA MM or flash MM from XDA thread.
Click to expand...
Click to collapse
but fastboot flash command is working and also sending data to phone but unable to write on phone as bootloader is locked
yash_rathore25 said:
but fastboot flash command is working and also sending data to phone but unable to write on phone as bootloader is locked
Click to expand...
Click to collapse
because they have erased this command/s from aboot partition (bootloader)
Hi friends
My phone is frd-l09c10b501 in android oreo
But oem unlock is disabled and i can't flash twrp recovery
Because oem unlock is locked and can't enable it
Please help me ??
Hello,
Greyed out OEM Unlock option can means "already unlocked" or simply not available for this region (firmware region?) and/or network carrier...
Check this, it can help: How to fix OEM Unlock greyed out or OEM Unlock disabled problem
Do not forget that your need to unlock your bootloader first via fastboot unlock command (using the unlock code for your device).
Then flashing TWRP on Oreo is not the same command as previous android versions AND you need TWRP "EMUI 8.0" compatible version.
New fastboot command:
Code:
fastboot flash recovery_ramdisk twrp-filename.img
And below, I give you 3 TWRP versions that shoud work for Honor 8 EMUI 8.0 (Oreo) devices:
1) Official latest TWRP version: twrp-3.2.2-0-frd.img
2) Previous version (found in "Huawei Multi-Tool by Team MT" v8): FRD_TWRP_3.2.0_EMUI8.img
3) Modded TWRP version (found in "Huawei Multi-Tool by Team MT" v8): FRD_TWRP_S_mak_KV_v2_EMUI8.img
alimokhtarabadi said:
Hi friends
My phone is frd-l09c10b501 in android oreo
But oem unlock is disabled and i can't flash twrp recovery
Because oem unlock is locked and can't enable it
Please help me
Click to expand...
Click to collapse
apparently the Russian firmware does not allow the unlock of the OEM. I think maybe there are no solutions. I do not know how to make a rebrand with oem and boot stuck.
Micdu70 said:
Hello,
Greyed out OEM Unlock option can means "already unlocked" or simply not available for this region (firmware region?) and/or network carrier...
Check this, it can help: How to fix OEM Unlock greyed out or OEM Unlock disabled problem
Do not forget that your need to unlock your bootloader first via fastboot unlock command (using the unlock code for your device).
Then flashing TWRP on Oreo is not the same command as previous android versions AND you need TWRP "EMUI 8.0" compatible version.
New fastboot command:
Code:
fastboot flash recovery_ramdisk twrp-filename.img
And below, I give you 3 TWRP versions that shoud work for Honor 8 EMUI 8.0 (Oreo) devices:
1) Official latest TWRP version: twrp-3.2.2-0-frd.img
2) Previous version (found in "Huawei Multi-Tool by Team MT" v8): FRD_TWRP_3.2.0_EMUI8.img
3) Modded TWRP version (found in "Huawei Multi-Tool by Team MT" v8): FRD_TWRP_S_mak_KV_v2_EMUI8.img
Click to expand...
Click to collapse
Thanks my friend?... But when frp is locked i can't flash recovery or unlock bootloader
Markxdx said:
apparently the Russian firmware does not allow the unlock of the OEM. I think maybe there are no solutions. I do not know how to make a rebrand with oem and boot stuck.
Click to expand...
Click to collapse
Before frp was unlock but when i doing factory reset again frp and oem both lock
The Russian variant allows unlocking, you can't block this. It's illegal, even there. You need to unlock your bootloader. It's that simple. I do not care if you did it before, you need to do it again since you flashed firmware.
alimokhtarabadi said:
Hi friends
My phone is frd-l09c10b501 in android oreo
But oem unlock is disabled and i can't flash twrp recovery
Because oem unlock is locked and can't enable it
Please help me
Click to expand...
Click to collapse
I sloved it.....just flash service repair firmware below link
https://forum.xda-developers.com/honor-8/development/firmware-huawei-honor-8-frd-l09-stock-t3696921
To Content farms like GETDROIDTIPS: DO NOT REPOST OR REFORM MY TOPIC ON YOUR WEBSITE WITHOUT INFORMING ME!
Recent Android 10 update fixed support for TA-1054 hardware, so we can do global conversion right now. Anything older will break the phone and you have to disassemble the phone and utilize EDL to unbrick it (test point indicated below).
Therefore, we have to install Android 10 directly, but for some reason, the bootloader will be reverted back to locked state, so it has to be unlocked again via some tricks.
This guide will tell you how to install Android 10 into TA-1054. If you don't have unlocked bootloader, you have to unlock it first.
If you don't have unlocked bootloader, you may need to look for Global conversion service online.
PLEASE MAKE SURE YOU HAVE BACKED UP EVERYTHING BEFORE YOU DO SO.
Step 1: Change SKUID
To change SKUID, you need to ensure your phone is rooted, or your phone booted to TWRP (official TWRP for Nokia 6.1 is OK to use) to allow us change SKUID written in deviceinfo partition.
If you booted to TWRP via these commands under Download mode:
Code:
fastboot reboot-bootloader
fastboot boot twrp-3.4.0-0-PL2_sprout.img
Once phone booted to TWRP (even if stuck at splash screen is OK), then you can dump the devceinfo and securefs partition:
Code:
adb shell dd if=/dev/block/bootdevice/by-name/deviceinfo of=/tmp/deviceinfo.img
adb shell dd if=/dev/block/bootdevice/by-name/securefs of=/tmp/securefs.img
adb pull /tmp/deviceinfo.img
adb pull /tmp/securefs.img
The reason why I suddenly mentioned securefs partition is, it contains Widevine DRM key that related to video-on-demand services like Netflix.
You have to back it up just in case.
Then follow this guide to edit SKUID written in deviceinfo into 600WW:
https://forum.xda-developers.com/nokia-7-plus/how-to/guide-how-to-change-skuid-to-worldwide-t3808520
Once SKUID changed, write the deviceinfo partition back:
Code:
fastboot flash deviceinfo deviceinfo_600WW.img
After SKUID changed, you'll find the launcher becomes weird, which is expected behavior.
Step 2: Install Android 10 full OTA
Please download it from here:
https://android.googleapis.com/pack.../c6260831df0acdfe9828f18bcea7ffb556f4b2e5.zip
And rename it into PL2-9999-0-00CN-B99-update.zip. Copy it to root directory of internal storage, and dial *#*#874#*#* to install it.
Once install complete, you might be asked for erasing userdata, just erase it.
Step 3: Unlock bootloader again (optional)
If you think it's OK to use Android 10 without unlocked bootloader, then that wraps up the procedure and enjoy it.
But if you want to unlock the bootloader again, you have to follow some trick.
Once the phone booted to welcome screen again, power it off, boot to Download mode by using this command:
Code:
fastboot oem alive
And connect the powered off phone to PC, it will be booted to Download mode again.
Next, check which slot is Android 10 installed:
Code:
fastboot getvar current-slot
If current-slot is A, execute this:
Code:
fastboot --set-active=b reboot-bootloader
If current-slot is B, execute this:
Code:
fastboot --set-active=a reboot-bootloader
Once slot changed, you'll be switched back to the previous version with unlocked bootloader.
Now you have to downgrade the abl/xbl to allow it being unlockable again.
Now check which slot is Chinese Nokia 6.1 Android build installed:
Code:
fastboot getvar current-slot
If current-slot is A, execute these:
Code:
fastboot flash abl_b C1N-0-0430-abl_service.elf
fastboot flash xbl_b C1N-0-0430-xbl_service.elf
fastboot --set-active=b reboot-bootloader
If current-slot is B, execute these:
Code:
fastboot flash abl_a C1N-0-0430-abl_service.elf
fastboot flash xbl_a C1N-0-0430-xbl_service.elf
fastboot --set-active=a reboot-bootloader
Both C1N-0-0430-abl_service.elf and C1N-0-0430-xbl_service.elf can be obtained from https://fih-firmware.hikaricalyx.com/hmd_en.html#c1n (extract it from C1N-0-0430-0-00CN-B05 firmware).
Then you can unlock the bootloader again with what you have done before:
Code:
fastboot flash unlock unlock.bin
fastboot flashing unlock_critical
(confirm bootloader unlock on the phone)
(while waiting for erasing, execute this immediately)
fastboot oem alive
fastboot flash unlock unlock.bin
fastboot oem unlock-go
(confirm unlock again)
(while waiting for erasing, execute this immediately)
fastboot oem alive
After we unlocked the bootloader, we have to switch back to previous Chinese Nokia 6.1 Android build to reinstall Android 10.
Check which slot is Android 10 installed:
Code:
fastboot getvar current-slot
If current-slot is A, execute this:
Code:
fastboot --set-active=b reboot
If current-slot is B, execute this:
Code:
fastboot --set-active=a reboot
Repeat the step 2 to reinstall Android 10 Full OTA, and enjoy Android 10 on Chinese Nokia 6.1 with unlocked bootloader.
Under Android 10, if bootloader unlocked, you'll lose Widevine DRM key permanently, that's why I asked you to backup securefs partition.
Is the shorting wires solution to unbrick the phone or to change china to global version?
Ok, pins shorted. Whats now?
Spacepl said:
Ok, pins shorted. Whats now?
Click to expand...
Click to collapse
flash nbo Nokia 6 2018 firmware with OST LA
Sent from my TA-1054 using Tapatalk
juwelrana091 said:
flash nbo Nokia 6 2018 firmware with OST LA
Click to expand...
Click to collapse
Do i need to unlock the bootloader to do this?
And if so can so post a link for a way that doesnt require the app provided by nokia?
J0NS3N said:
Do i need to unlock the bootloader to do this?
And if so can so post a link for a way that doesnt require the app provided by nokia?
Click to expand...
Click to collapse
Is your phone already bricked? Then shorting the pins will trigger EDL mode and then you can use Qualcomm tools to flash the abl and xbl. That can make the phone usable again, but yes you will still need to flash the CN firmware as Global will not be usable on this device.
help
hello i tried shortening all 4, or one of the 2 sets but it did not trigger EDL, my phone is stuck in Download mode as soon as it turns on, my pc only recognizes it as Fastboot device, my bootloader is locked, i have the exact same model, can you help me??
Could you please clarify:
is it possible to install PL2-410C-0-00WW-B03 on TA-1054 China Version , i.e. convert it into Android 10 Global Version? So it is impossible to install earlier global versions, but it is possible to install PL2-410C-0-00WW-B03?
Thank you.
vanechka25 said:
Could you please clarify:
is it possible to install PL2-410C-0-00WW-B03 on TA-1054 China Version , i.e. convert it into Android 10 Global Version? So it is impossible to install earlier global versions, but it is possible to install PL2-410C-0-00WW-B03?
Thank you.
Click to expand...
Click to collapse
Yes, but remember to change SKUID to 600WW before installing PL2-410C-0-00WW-B03.
Also, flash PL2-410C-0-00WW-B03 into bootloader unlocked TA-1054 will revert the bootloader back to locked state, you have to unlock it again with some trick, will talk about that later.
If you use some flashing tool that can elevate like NTool, just go ahead and flash PL2-410C firmware.
hikari_calyx said:
Yes, but remember to change SKUID to 600WW before installing PL2-410C-0-00WW-B03.
Also, flash PL2-410C-0-00WW-B03 into bootloader unlocked TA-1054 will revert the bootloader back to locked state, you have to unlock it again with some trick, will talk about that later.
If you use some flashing tool that can elevate like NTool, just go ahead and flash PL2-410C firmware.
Click to expand...
Click to collapse
Thank you for the quick answer!
Hmm... Is it possible to change SKUID for this phone with locked bootloader?
I know, for some other phones it could be done using fastboot command like this:
fastboot oem CustomerSKUID set 600WW
but I'm not sure that this method is applicable to TA-1054. I checked the command CustomerSKUID:
fastboot oem CustomerSKUID get
and it is unknown.
Do you know any easy way to change SKUID without unlockng / rooting?
What will happen if I try to flash PL2-410C-0-00WW-B03 without SKUID changing?
Actually, the main reason to update the phone is the problem with mobile internet. My local mobile operator SIM does't allow to use it, but the voice service works OK. When I set this SIM to another phone, internet works, when I set SIM of another operator to TA-1054 - it works again. So, certain operator internet settings and settings in chinese ROM are different. I suppose, it is required to change bands modes or something like this, but I dont't know the real reason of this issue.
Maybe you could give me an advice about this internet problem, so I don't need to update phone to global ROM at all.
vanechka25 said:
Thank you for the quick answer!
Hmm... Is it possible to change SKUID for this phone with locked bootloader?
I know, for some other phones it could be done using fastboot command like this:
fastboot oem CustomerSKUID set 600WW
but I'm not sure that this method is applicable to TA-1054. I checked the command CustomerSKUID:
fastboot oem CustomerSKUID get
and it is unknown.
Do you know any easy way to change SKUID without unlockng / rooting?
What will happen if I try to flash PL2-410C-0-00WW-B03 without SKUID changing?
Actually, the main reason to update the phone is the problem with mobile internet. My local mobile operator SIM does't allow to use it, but the voice service works OK. When I set this SIM to another phone, internet works, when I set SIM of another operator to TA-1054 - it works again. So, certain operator internet settings and settings in chinese ROM are different. I suppose, it is required to change bands modes or something like this, but I dont't know the real reason of this issue.
Maybe you could give me an advice about this internet problem, so I don't need to update phone to global ROM at all.
Click to expand...
Click to collapse
If you don't have some special flashing utility (requires USB dongle), you cannot change SKUID without unlocked bootloader.
You can search about global conversion service remotely which could be paid.
Install global firmware with mismatch SKUID will cause the OS itself buggy, many feature missing and cannot pass Google Play Certification.
hikari_calyx said:
If you don't have some special flashing utility (requires USB dongle), you cannot change SKUID without unlocked bootloader.
You can search about global conversion service remotely which could be paid.
Install global firmware with mismatch SKUID will cause the OS itself buggy, many feature missing and cannot pass Google Play Certification.
Click to expand...
Click to collapse
Thank you very much for the answer. You clarified a lot of things!
Downgrade from android 10 to android 9
vanechka25 said:
Thank you very much for the answer. You clarified a lot of things!
Click to expand...
Click to collapse
Hey can you help me for downgrading android 10 to android 9 with locked bootloader .i want to unlock bootloader to downgrading to android 9 and also i am facing wifi disconnected and mobile restarting issues .also what this ss show is that bootloader locked or unlocked
hikari_calyx said:
If current-slot is A, execute these:
Code:
fastboot flash abl_b C1N-0-0430-abl_service.elf
fastboot flash xbl_b C1N-0-0430-xbl_service.elf
fastboot --set-active=b reboot-bootloader
If current-slot is B, execute these:
Code:
fastboot flash abl_a C1N-0-0430-abl_service.elf
fastboot flash xbl_a C1N-0-0430-xbl_service.elf
fastboot --set-active=a reboot-bootloader
Both C1N-0-0430-abl_service.elf and C1N-0-0430-xbl_service.elf can be obtained from https://fih-firmware.hikaricalyx.com/hmd_en.html#c1n (extract it from C1N-0-0430-0-00CN-B05 firmware).
Then you can unlock the bootloader again with what you have done before:
Click to expand...
Click to collapse
A very complete guide, thank you, but I have a question. From what I've seen both C1N-0-0430-abl_service.elf and C1N-0-0430-xbl_service.elf refer to Nokia 7 (android OS 7.1.1), is it ok to flash them on a Nokia 6.1 with android OS 8.1 ?
21prods said:
A very complete guide, thank you, but I have a question. From what I've seen both C1N-0-0430-abl_service.elf and C1N-0-0430-xbl_service.elf refer to Nokia 7 (android OS 7.1.1), is it ok to flash them on a Nokia 6.1 with android OS 8.1 ?
Click to expand...
Click to collapse
Yes it will work on both Nokia 6.1 and 7.
hikari_calyx said:
Yes it will work on both Nokia 6.1 and 7.
Click to expand...
Click to collapse
Thank you
Hello, EveryoneMy Nokia 6.1 2018 Hmd Global TA-1054 with Build number - 00WW_3_270 will receive a global system update and security update. Will this method described above work for me? So you will get a global version of version 10 or have to wait. My latest security fix for Android is from October 1, 2018. Can you explain in detail what steps to take to make the updates.
Hello,
Did anyone managed to unlock bootloader on Realme 5i ?
I flashed the latest Android 10 firmware from RealMe website, everything went ok, but now I want to unlock bootlader to root the device, and it seems that nothing helps.
Please help, thanks
how to unlock the bootloader in Realme 5i RMX2030
Here is a good guide that worked for me to unlock the bootloader:
www ytechb com/how-to-root-realme-5i-and-unlock-bootloader/
The root part didn't work, Magisk complains about unknow boot image format
G0bl1n said:
Here is a good guide that worked for me to unlock the bootloader:
www ytechb com/how-to-root-realme-5i-and-unlock-bootloader/
The root part didn't work, Magisk complains about unknow boot image format
Click to expand...
Click to collapse
I've done the in-depth test and it's on the Fastboot screen but when I type fastboot flashing unlock in a command window it just shows me the help text for fastboot, which doesn't show any command or option for either flashing or unlock, so how can I get it to work if those aren't valid commands?
fastboot devices shows my phone, so the device is recognised.
EDIT: I'm still on Android 9 A.15. I understand that there's no unlocked for Android 10 yet.
EDIT: Nevermind. I was using adb/fastboot from the link in this guide, which is v1.3 https://www.ytechb.com/how-to-root-realme-5i-and-unlock-bootloader/
After I updated to minimal v1.43 from here it worked https://androidmtk.com/download-minimal-adb-and-fastboot-tool
My problem was same. But i successfully downgrade to color os 6. I guess you can try it too.
Enable USB Debugging and Allow unlock boot loader option in USB debugging.
Connect your mobile with PC and use following Command.
adb reboot bootloader
fastbook flashing unlock
Check mobile for unlock option.
How did you downgraded to colour os 6?
I'm trying to root my realme 5i that i upgraded to 10.
Can you help me?
M. Farhad said:
My problem was same. But i successfully downgrade to color os 6. I guess you can try it too.
Enable USB Debugging and Allow unlock boot loader option in USB debugging.
Connect your mobile with PC and use following Command.
adb reboot bootloader
fastbook flashing unlock
Check mobile for unlock option.
Click to expand...
Click to collapse
what's the next step
Does anyone knows how to unlock bootloader in Itel a48 (L6006) device?
I tried to unlock the bootloader by using these commands...
adb reboot bootloader
fastboot oem unlock (not worked)
fastboot flashing unlock (not worked)
fastboot flashing unlock critical (not worked)
So now, How can I unlock the bootloader? I want to unlock the bootloader because I want to root my device with magisk using twrp.
Everytime I try to flash the TWRP recovery image file by using these commands...
fastboot boot recovery.img (not worked)
fastboot flash recovery recovery.img (not worked)
I failed, I also tried to directly flash the patched boot file of magisk by using the bellow command...
fastboot flash boot masgisk.img
(Note: I tried both boot_a and boot_b, none of these worked)
I once again failed...and when I tried to check if the bootloader already unlocked by using these commands...
fastboot getvar all (not worked)
fastboot oem device-info (not worked)
Upper commands returns only
OKAY [process finish time]
and I also want to mention that Fastboot and Adb both can recognize my device I also installed the usb drivers and adb drivers, Usb debugging and oem unlock is turned on.
Please help me
Look inside here:
Bootloader Mode ITEL A48, how to - HardReset.info
Check out how to open the bootloader mode in your device. Afterwards you can see how to navigate in that mode and how to quit it.
www.hardreset.info
you didn't read the whole thread, I said I want to flash twrp but not working, do you know anything about it? I know how to access bootloader mode but when I try to flash the img file it says flash is not allowed in locked device..
jwoegerbauer said:
Look inside here:
Bootloader Mode ITEL A48, how to - HardReset.info
Check out how to open the bootloader mode in your device. Afterwards you can see how to navigate in that mode and how to quit it.
www.hardreset.info
Click to expand...
Click to collapse
If Fastboot isn't working then either bootloader isn't unlocked or Fastboot isn't supported or wrong Fastboot driver used.
Did you enable the OEM unlocking option from developer option?
if not then enable it first after that boot into boot loader mode and type this command: fastboot oem unlock
mamun.mum said:
Did you enable the OEM unlocking option from developer option?
if not then enable it first after that boot into boot loader mode and type this command: fastboot oem unlock
Click to expand...
Click to collapse
yah I turned that option on
anyways now I unlocked the bootloader using a very complicated (for me) method
I unlocked the bootloader using OEM key/Identifier token
Israfil_miya said:
yah I turned that option on
anyways now I unlocked the bootloader using a very complicated (for me) method
I unlocked the bootloader using OEM key/Identifier token
Click to expand...
Click to collapse
Where and how did you find the OEM key
Kamii sama said:
Where and how did you find the OEM key
Click to expand...
Click to collapse
How to root the Itel L6006
This guide will explain how to root the Itel L6006 which is an 10 (GO) powered device. This technique only works when you have the OEM's keys used to sign the images. Luckily, we do for the Itel L6006
www.hovatek.com
I did a long research took me month to get this way of rooting, check it there's a guide on how you can unlock the bootloader which worked for me
Israfil_miya said:
How to root the Itel L6006
This guide will explain how to root the Itel L6006 which is an 10 (GO) powered device. This technique only works when you have the OEM's keys used to sign the images. Luckily, we do for the Itel L6006
www.hovatek.com
I did a long research took me month to get this way of rooting, check it there's a guide on how you can unlock the bootloader which worked for me
Hi Can you help me how to unlock bootloader Itel A48 I follow method that you shared but iam facing issue identifer token can't generated plz help
Click to expand...
Click to collapse
Israfil_miya said:
How to root the Itel L6006
This guide will explain how to root the Itel L6006 which is an 10 (GO) powered device. This technique only works when you have the OEM's keys used to sign the images. Luckily, we do for the Itel L6006
www.hovatek.com
I did a long research took me month to get this way of rooting, check it there's a guide on how you can unlock the bootloader which worked for me
Click to expand...
Click to collapse
Thanks it's working after changing little bit command
Israfil_miya said:
How to root the Itel L6006
This guide will explain how to root the Itel L6006 which is an 10 (GO) powered device. This technique only works when you have the OEM's keys used to sign the images. Luckily, we do for the Itel L6006
www.hovatek.com
I did a long research took me month to get this way of rooting, check it there's a guide on how you can unlock the bootloader which worked for me
Click to expand...
Click to collapse
After unlock bootloader we can install magisk patched file using fastboot method because I getting error when sign boot file
Where did you get the twrp ?
kavanishwar said:
Where did you get the twrp ?
Click to expand...
Click to collapse
I am looking for it
Israfil_miya said:
I am looking for it
Click to expand...
Click to collapse
Your root your itel a48 phone??
ajbadol said:
Your root your itel a48 phone??
Click to expand...
Click to collapse
yes I did but I unroot the phone and now using a GSI rom
P
Israfil_miya said:
yes I did but I unroot the phone and now using a GSI rom
Click to expand...
Click to collapse
Plz help me bro i try 1 year but no way root itel a48
ajbadol said:
P
Plz help me bro i try 1 year but no way root itel a48
Click to expand...
Click to collapse
check your inbox
Israfil_miya
To root a phone's Android it's NOT required to unlock its bootloader.
Since Android 6 the Linux command suite TOYBOX is merged with Android - what has the SU command incorporated, thus ROOT is available
xXx yYy said:
Israfil_miya
To root a phone's Android it's NOT required to unlock its bootloader.
Since Android 6 the Linux command suite TOYBOX is merged with Android - what has the SU command incorporated, thus ROOT is available
Click to expand...
Click to collapse
As of I know I need to unlock the bootloader before flashing any image file