Hi, I've got the 6045Y model which I've been trying to install twrp on, but I can't unlock the bootloader; it says oem unlock is not allowed.
I've tried on os x and linux with sudo but it's the same on both sides. As my phone isn't carrier locked, I don't understand why it's not allowing me to unlock the bootloader. There's also no oem unlock option in the developer options.
Any help?
You must do something wrong?
Can you trY with Windows
You need Alcatel Drivers+Minimal Adb and Fastboot
connect device you must enable debugging and then
-type "adb reboot-bootloader" to reboot into bootloader. The device should reboot to the screen showing "alcatel onetouch...powered by android". This is bootloader mode.
-Then type "fastboot -i 0x1bbb devices" should show some numbers and "fastboot" after the numbers
-Type "fastboot -i 0x1bbb oem device-info" shows device info including bootloader status (e.g. locked).
-Type "fastboot -i 0x1bbb oem unlock" to unlock the bootloader; after this you should get, for device info,
-Type "fastboot -i 0x1bbb oem device-info" and you should see "Device unlocked: true"
-To reboot normally: "fastboot -i 0x1bbb reboot"
Alek Dev said:
You must do something wrong?
Can you trY with Windows
You need Alcatel Drivers+Minimal Adb and Fastboot
connect device you must enable debugging and then
-type "adb reboot-bootloader" to reboot into bootloader. The device should reboot to the screen showing "alcatel onetouch...powered by android". This is bootloader mode.
-Then type "fastboot -i 0x1bbb devices" should show some numbers and "fastboot" after the numbers
-Type "fastboot -i 0x1bbb oem device-info" shows device info including bootloader status (e.g. locked).
-Type "fastboot -i 0x1bbb oem unlock" to unlock the bootloader; after this you should get, for device info,
-Type "fastboot -i 0x1bbb oem device-info" and you should see "Device unlocked: true"
-To reboot normally: "fastboot -i 0x1bbb reboot"
Click to expand...
Click to collapse
I tried on windows just now and the same thing happened: "FAILED (remote: oem unlock is not allowed)". I should mention though, I flashed twrp before unlocking the bootloader. I wonder if this is what's causing the problem.
I dont remember if this option was there, but you can try. Go into Settings/About Phone, scroll down and click on “build number” continuously until you see a toast notification telling you that you've enabled Developer Options. Go back to your Settings menu and enter Developer Options, scroll down and click on the “Enable OEM Unlock” checkbox, also make sure you enable USB Debugging while you're in the Developer Options menu.
DallasCZ said:
I dont remember if this option was there, but you can try. Go into Settings/About Phone, scroll down and click on “build number” continuously until you see a toast notification telling you that you've enabled Developer Options. Go back to your Settings menu and enter Developer Options, scroll down and click on the “Enable OEM Unlock” checkbox, also make sure you enable USB Debugging while you're in the Developer Options menu.
Click to expand...
Click to collapse
I have the same problem an update was pushed to the UK version last week 6045Y 5.0.2 -010 02 now unable to unlock bootloader i tried everything, so the bootloader must of changed BTW the update was about 458mb.
aradalien said:
I have the same problem an update was pushed to the UK version last week 6045Y 5.0.2 -010 02 now unable to unlock bootloader i tried everything, so the bootloader must of changed BTW the update was about 458mb.
Click to expand...
Click to collapse
same here in the uk have same version and cannot unlock bootloader anyone been sucssesful
aradalien said:
I have the same problem an update was pushed to the UK version last week 6045Y 5.0.2 -010 02 now unable to unlock bootloader i tried everything, so the bootloader must of changed BTW the update was about 458mb.
Click to expand...
Click to collapse
Same problem with same UK model and installed that patch too. I managed to flash TWRP and install PAC ROM still bootloader claims to be locked.
fastboot -i 0x1bbb oem unlock
FAILED (remote: oem unlock is not allowed)
fastboot -i 0x1bbb oem device-info
(bootloader) Device tempered:false
(bootloader) Device Unlock:false
easiest way is to download stock firmware with flsh tool for panasonic eluga switch (rebranded idol3),. Flash it with using the included flash tool. then unlock bootloader. Then use mobile upgrade Q 5.0.6 to go back to stock. And you are on stock uk firmware with unlocked bootloader.
I flashed someone's stock 6045Y(Europe) Firmware: 5.0.2-010 03 but couldn't unlock it either. After that I flashed 6045-i806-DCZ. I was really surpriced it let me do that while claiming to be locked and untempered. After that I did factory reset and flashed PAC-ROM. I'm not sure why should I bother to unlock bootloader if I already have TWRP and PAC-ROM flashed. I've no idea how can I even flash rom's with locked bootloader? Maybe oem device-info is bugged.
Anyways I download panasonic eluga switch firmwire, gonna test it after taking backups.
Reippi said:
I flashed someone's stock 6045Y(Europe) Firmware: 5.0.2-010 03 but couldn't unlock it either. After that I flashed 6045-i806-DCZ. I was really surpriced it let me do that while claiming to be locked and untempered. After that I did factory reset and flashed PAC-ROM. I'm not sure why should I bother to unlock bootloader if I already have TWRP and PAC-ROM flashed. I've no idea how can I even flash rom's with locked bootloader? Maybe oem device-info is bugged.
Anyways I download panasonic eluga switch firmwire, gonna test it after taking backups.
Click to expand...
Click to collapse
the Panasonic firmware flash also the aboot partition which has bootloader unlock enabled. without unlocked bootloader you could end with bricked device and the only solution is mobile upgrade q.
I did as you said and finally got bootloader unlocked, yey! Hopefully I don't have to go thought that process anytime soon. Thanks and thumps up!
Reippi said:
I did as you said and finally got bootloader unlocked, yey! Hopefully I don't have to go thought that process anytime soon. Thanks and thumps up!
Click to expand...
Click to collapse
no, its permanent.
I try to unlock my bootloader but two problems : oem unlock is not allowed and eluga sotware stuck at 2 %!!! I want install MM and I have stock rom can install the same the MM upgrade without unlock the bootloader? Regards
camelotto said:
I try to unlock my bootloader but two problems : oem unlock is not allowed and eluga sotware stuck at 2 %!!! I want install MM and I have stock rom can install the same the MM upgrade without unlock the bootloader? Regards
Click to expand...
Click to collapse
1-You didnt wrote phch model do you have.
2-newer heard of this issue . Install the drivers from the eluga firmware app, reboot, turn off your device, connect device to computer, run the download form the eluga firmware app.
jlocohustler said:
I tried on windows just now and the same thing happened: "FAILED (remote: oem unlock is not allowed)". I should mention though, I flashed twrp before unlocking the bootloader. I wonder if this is what's causing the problem.
Click to expand...
Click to collapse
And do you have sucess in flash? It worked? Do you have TWRP????
---------- Post added at 10:34 AM ---------- Previous post was at 10:30 AM ----------
Reippi said:
I flashed someone's stock 6045Y(Europe) Firmware: 5.0.2-010 03 but couldn't unlock it either. After that I flashed 6045-i806-DCZ. I was really surpriced it let me do that while claiming to be locked and untempered. After that I did factory reset and flashed PAC-ROM. I'm not sure why should I bother to unlock bootloader if I already have TWRP and PAC-ROM flashed. I've no idea how can I even flash rom's with locked bootloader? Maybe oem device-info is bugged.
Anyways I download panasonic eluga switch firmwire, gonna test it after taking backups.
Click to expand...
Click to collapse
That is the point from my previouse question! If you flash TWRP, your bootloader is unlocked by default!
persona78 said:
And do you have sucess in flash? It worked? Do you have TWRP????
---------- Post added at 10:34 AM ---------- Previous post was at 10:30 AM ----------
That is the point from my previouse question! If you flash TWRP, your bootloader is unlocked by default!
Click to expand...
Click to collapse
After flashing panasonic rom, you have unlockable bootloader.
Look here
http://forum.xda-developers.com/idol-3/general/guide-repair-idol-3-t3372076
I have 6045Y and panasonic rom work!
fastboot is detecting device but oem unlock/flashing unlock command not working.
I think that command has been changed since this june month security patch.
yash_rathore25 said:
fastboot is detecting device but oem unlock/flashing unlock command not working.
I think that command has been changed since this june month security patch.
Click to expand...
Click to collapse
It looks like MM update dont include aboot with commands for unlocking bootloader. You have to use mobile upgrade Q PC aPP, or Panasonic eluga firmware flash tool (for 6045Y) to go back to 5.0.2. Then unlock bootloader, and flash update to MM (or when on panasonic firmware youhave to use mobile upgrade Q to go back to stock). When on stock, wat for OTA MM or flash MM from XDA thread.
DallasCZ said:
It looks like MM update dont include aboot with commands for unlocking bootloader. You have to use mobile upgrade Q PC aPP, or Panasonic eluga firmware flash tool (for 6045Y) to go back to 5.0.2. Then unlock bootloader, and flash update to MM (or when on panasonic firmware youhave to use mobile upgrade Q to go back to stock). When on stock, wat for OTA MM or flash MM from XDA thread.
Click to expand...
Click to collapse
but fastboot flash command is working and also sending data to phone but unable to write on phone as bootloader is locked
yash_rathore25 said:
but fastboot flash command is working and also sending data to phone but unable to write on phone as bootloader is locked
Click to expand...
Click to collapse
because they have erased this command/s from aboot partition (bootloader)
Related
I have owned this phone for about 5-6 months now and have never unlocked the bootloader. I know I probably should of done that when I got it but for some reason I have been able to flash TWRP, Root the phone, and install custom roms without wiping the phone no problem. I am currently on Paranoid Android 4.6 Beta 6 and TWRP 2.8 but I wanted to go back to CM11S, and I thought maybe it's time that I unlock the bootloader. I have installed the correct drivers and when I type "fastboot oem unlock", the Command Prompt said "finished in 0.06 seconds", I then rebooted and nothing happens. I also tried a Toolkit to unlock it but that didn't do anything either. Can anyone help? I don't want to Hard Brick my phone.
Thanks
It sounds like your bootloader is already unlocked.
Try running
fastboot oem device-info
to see what it says. Post your results here and somebody should be able to help you.
The right command is:
Code:
fastboot oem device-info
Transmitted via Bacon
check this
Matt7262 said:
I have owned this phone for about 5-6 months now and have never unlocked the bootloader. I know I probably should of done that when I got it but for some reason I have been able to flash TWRP, Root the phone, and install custom roms without wiping the phone no problem. I am currently on Paranoid Android 4.6 Beta 6 and TWRP 2.8 but I wanted to go back to CM11S, and I thought maybe it's time that I unlock the bootloader. I have installed the correct drivers and when I type "fastboot oem unlock", the Command Prompt said "finished in 0.06 seconds", I then rebooted and nothing happens. I also tried a Toolkit to unlock it but that didn't do anything either. Can anyone help? I don't want to Hard Brick my phone.
Thanks
Click to expand...
Click to collapse
hello ..
i have oneplus 64 that the Tampered was true and unlock false.
i have original recovery . that i cant run not signed zip
i tried everything even install coloros ( and its failed)
finaly after alot of hours the soultion very simple
1.install throw adb sideload the signed rom ... https://www.androidfilehost.com/?fid=95747613655046106
2. its take you to factory rom
3. after that u can unlock your oneplus with fastboot oem unlock
thanks
timmaaa said:
The right command is:
Code:
fastboot oem device-info
Click to expand...
Click to collapse
Thanks, edited to fix.
Hi,
I tried to unlock my bootloader via flash tool, but for some reason, my rooting status (my bootloader) is unknown (before was unlockable). I relocked and unlocked it again but still no luck. I flashed the latest firmware with flashtool.. but my bootloader's status is still unknown. The device is rooted and verified. What i must to do to have back bootloader to unlockable?
Please help..
use fastboot commands
Ebin Matthew said:
Hi,
I tried to unlock my bootloader via flash tool, but for some reason, my rooting status (my bootloader) is unknown (before was unlockable). I relocked and unlocked it again but still no luck. I flashed the latest firmware with flashtool.. but my bootloader's status is still unknown. The device is rooted and verified. What i must to do to have back bootloader to unlockable?
Please help..
Click to expand...
Click to collapse
i was also facing trouble unlocking the boot loader using flashtool, how-ever i used fastboot commands, it worked fine for me, use following commands in fastboot mode
fastboot.exe -i 0x0fce oem unlock ..........
after unlock use your key
Hi everybody!
After the precious advice of user ndt192, I managed to unlock my SKR-A0 which, until this day, seemed un-unlockable.
THIS PROCEDURE WILL WIPE YOUR PHONE MEMORY SO REMEMBER TO BACKUP EVERYTHING
TL;DR
In developer options, OEM Unlocking must be ticked (if present), then I just issued a fastboot oem unlock while in fastboot mode.
I'm on the latest OTA (29-12-18, v. G66X1812291CN00MPX).
Full Tutorial
Enable developer options by tapping 7+ times on Settings -> About Phone -> Build Number
Enable USB Debugging and OEM Unlocking (if present) in Developer Options (Settings -> Other Settings -> Advanced Settings -> Developer Options)
Open a terminal and issue the command adb devices
On the phone, allow the access from your computer on the dialog that will be shown
In terminal adb reboot bootloader
Wait for the phone to reboot in bootloader mode
STOP AND THINK - DID YOU BACKUP EVERYTHING?
Issue the command fastboot oem unlock and wait for the OKAY in the terminal window
Reboot your phone with fastboot reboot
Now, you will be informed that because of the unlocking your phone memory is "corrupted" (aka not decryptable anymore) so the phone needs to be wiped. Agree and wait.
Hopefully, your bootloader will be unlocked now. You can check that by returning to fastboot mode and checking that the Status is Unlocked.
If you want TWRP/root, check out this thread.
This procedure didn't seem to work until a few months ago so I don't know exactly if this procedure works only on newest Joy UI versions or not. Try it out (at your own risk).
IMPORTANT - if you can't unlock with these steps, please post here with the version of Joy UI installed and the message shown after the fastboot oem unlock command
loriz said:
Hi everybody!
After the precious advice of user ndt192, I managed to unlock my SKR-A0 which, until this day, seemed un-unlockable.
THIS PROCEDURE WILL WIPE YOUR PHONE MEMORY SO REMEMBER TO BACKUP EVERYTHING
TL;DR
In developer options, OEM Unlocking must be ticked (if present), then I just issued a fastboot oem unlock while in fastboot mode.
I'm on the latest OTA (29-12-18, v. G66X1812291CN00MPX).
Full Tutorial
Enable developer options by tapping 7+ times on Settings -> About Phone -> Build Number
Enable USB Debugging and OEM Unlocking (if present) in Developer Options (Settings -> Other Settings -> Advanced Settings -> Developer Options)
Open a terminal and issue the command adb devices
On the phone, allow the access from your computer on the dialog that will be shown
In terminal adb reboot bootloader
Wait for the phone to reboot in bootloader mode
STOP AND THINK - DID YOU BACKUP EVERYTHING?
Issue the command fastboot oem unlock and wait for the OKAY in the terminal window
Reboot your phone with fastboot reboot
Now, you will be informed that because of the unlocking your phone memory is "corrupted" (aka not decryptable anymore) so the phone needs to be wiped. Agree and wait.
Hopefully, your bootloader will be unlocked now. You can check that by returning to fastboot mode and checking that the Status is Unlocked.
This procedure didn't seem to work until a few months ago so I don't know exactly if this procedure works only on newest Joy UI versions or not. Try it out (at your own risk).
IMPORTANT - if you can't unlock with these steps, please post here with the version of Joy UI installed and the message shown after the fastboot oem unlock command
Click to expand...
Click to collapse
It worked, now can we install magisk manager on our phone?
Synezio said:
It worked, now can we install magisk manager on our phone?
Click to expand...
Click to collapse
It looks like there's some progress on that too! What a great day!
See here: https://forum.xda-developers.com/android/development/recovery-unofficial-twrp-recovery-t3892707
Need help my blackshark bootloop after I try to unlock bootloader
i make mistake that i write wrong code
adb reboot bootloader
Fastboot oem unlock
(its make my device factory reset) and then I try go to bootloader again but this device already unlocked.
But after that, I try to open recovery mode. and factory reset it. and its going like this *bootloop
please I need help, I can't do anything to this phone again because its can't go bootloader again even I press volume down+power T_T
What should I do ?
(Sorry my english so bad)
for addition, you need to unlock the critical too
kanded said:
for addition, you need to unlock the critical too
Click to expand...
Click to collapse
how to unlock critical in china version?
isotonik said:
how to unlock critical in china version?
Click to expand...
Click to collapse
how do you know unlock critical in global ? its just the same
kanded said:
how do you know unlock critical in global ? its just the same
Click to expand...
Click to collapse
in global version use command fastboot flashing unlock_critical but not work on cn version .
i just unlock critical on cn version with command fastboot oem unlock_critical
need wipe/format data manual at stock recovery after unlock critical will ask for password if not wipe at stock recovery.
isotonik said:
in global version use command fastboot flashing unlock_critical but not work on cn version .
i just unlock critical on cn version with command fastboot oem unlock_critical
need wipe/format data manual at stock recovery after unlock critical will ask for password if not wipe at stock recovery.
Click to expand...
Click to collapse
you unlocked it, congrats. its not that hard if you want to read ton of threds in xda.
Anyone can help me... I have blackshark GLOBAL (SKR-H0)
And i need help...
How to change global to china rom.. Sorry my bad english
.big thanks...
My black shark china version suddenly unknown baseband version, no IMEI, no wifi MAC address, no service and no sim cards. Please help how to do?
kanded said:
you unlocked it, congrats. its not that hard if you want to read ton of threds in xda.
Click to expand...
Click to collapse
What do you mean? he asked about password.
Do you celebrate unlock?i dont understand
Let me know how to unlock password!
I am the same.
kanded said:
you unlocked it, congrats. its not that hard if you want to read ton of threds in xda.
Click to expand...
Click to collapse
what do u mean? he asked about password...
u tell unlock? congrats
how get about password
im same
Hi, i have a skr-a0 china bs 1.
i unlocked my bs and install twrp and magisk but i dont have a backups. anyone help me i turn to stock or enabled ota ?
TabldotLife said:
Hi, i have a skr-a0 china bs 1.
i unlocked my bs and install twrp and magisk but i dont have a backups. anyone help me i turn to stock or enabled ota ?
Click to expand...
Click to collapse
Every thread says do a backup. You didn't. Wait until someone with a China BS backs up and uploads
gilbert32 said:
Every thread says do a backup. You didn't. Wait until someone with a China BS backs up and uploads
Click to expand...
Click to collapse
sorry i dont backup first and wait now thx for reply and sory again my babblng
Unlock bootloader
You unlock bootloader without a code?my phone P10lite and need to code,it's really working?OMG
Help me pls, i unlock my black shark china, when i type fastboot oem unlock then cmd not working, why?
Help pls
Help, i got bootloop on my bs2pro, need unlock bootloder code for reflashing stock rom
this methode didnt work on android 10.
anyone know how to unlock bootloader and root balckshark on android 10 ?
Hello,
Did anyone managed to unlock bootloader on Realme 5i ?
I flashed the latest Android 10 firmware from RealMe website, everything went ok, but now I want to unlock bootlader to root the device, and it seems that nothing helps.
Please help, thanks
how to unlock the bootloader in Realme 5i RMX2030
Here is a good guide that worked for me to unlock the bootloader:
www ytechb com/how-to-root-realme-5i-and-unlock-bootloader/
The root part didn't work, Magisk complains about unknow boot image format
G0bl1n said:
Here is a good guide that worked for me to unlock the bootloader:
www ytechb com/how-to-root-realme-5i-and-unlock-bootloader/
The root part didn't work, Magisk complains about unknow boot image format
Click to expand...
Click to collapse
I've done the in-depth test and it's on the Fastboot screen but when I type fastboot flashing unlock in a command window it just shows me the help text for fastboot, which doesn't show any command or option for either flashing or unlock, so how can I get it to work if those aren't valid commands?
fastboot devices shows my phone, so the device is recognised.
EDIT: I'm still on Android 9 A.15. I understand that there's no unlocked for Android 10 yet.
EDIT: Nevermind. I was using adb/fastboot from the link in this guide, which is v1.3 https://www.ytechb.com/how-to-root-realme-5i-and-unlock-bootloader/
After I updated to minimal v1.43 from here it worked https://androidmtk.com/download-minimal-adb-and-fastboot-tool
My problem was same. But i successfully downgrade to color os 6. I guess you can try it too.
Enable USB Debugging and Allow unlock boot loader option in USB debugging.
Connect your mobile with PC and use following Command.
adb reboot bootloader
fastbook flashing unlock
Check mobile for unlock option.
How did you downgraded to colour os 6?
I'm trying to root my realme 5i that i upgraded to 10.
Can you help me?
M. Farhad said:
My problem was same. But i successfully downgrade to color os 6. I guess you can try it too.
Enable USB Debugging and Allow unlock boot loader option in USB debugging.
Connect your mobile with PC and use following Command.
adb reboot bootloader
fastbook flashing unlock
Check mobile for unlock option.
Click to expand...
Click to collapse
what's the next step
hello,
i did unlock the bootloader for my zenfone 7 pro
and installed twrp recovery then rooted via magisk
cuz I wanted voLTE but it didn't work for me so I wanted to be back to stock
I relock the phone using fastboot command
fastboot oem asus-lock
it did relock my phone
but there is no OS nor Recovery !
when I power my phone on the fastboot UI appears. even if I select recovery nothing changes. opens fastboot only
how to re install the firmware ? help plz
in case anyone has the same problem.
i did solve it by flashing the (raw) firmware via fastboot ( Flash_AFT method )
M-772007 said:
hello,
i did unlock the bootloader for my zenfone 7 pro
and installed twrp recovery then rooted via magisk
cuz I wanted voLTE but it didn't work for me so I wanted to be back to stock
I relock the phone using fastboot command
fastboot oem asus-lock
it did relock my phone
but there is no OS nor Recovery !
when I power my phone on the fastboot UI appears. even if I select recovery nothing changes. opens fastboot only
how to re install the firmware ? help plz
Click to expand...
Click to collapse
There are new guides on how to get volte if you want to try again.
[Guide] Easy method to Enable Volte (with root) on Tmobile and maybe other networks on Android 11 and maybe 10
So first you have to root. I used twrp and magisk. There are guides on how to do that you can find by searching around. Then once you do that, follow these directions, What I did was manually entered all of these setprop commands below, on the...
forum.xda-developers.com
This is one but there are others if you need the help.
After relock bootloader i can send phone to warranty?
I tried to relock the phone with the command "fastboot oem asus-lock", but it shows "waitting for any device" and my phone just sit there and do nothing..
Any other method to relock the Zenfone 7 pro?
M-772007 said:
hello,
i did unlock the bootloader for my zenfone 7 pro
and installed twrp recovery then rooted via magisk
cuz I wanted voLTE but it didn't work for me so I wanted to be back to stock
I relock the phone using fastboot command
fastboot oem asus-lock
it did relock my phone
but there is no OS nor Recovery !
when I power my phone on the fastboot UI appears. even if I select recovery nothing changes. opens fastboot only
how to re install the firmware ? help plz
Click to expand...
Click to collapse
I believe that relock is impossible and but to make the device recovery to installed status of stock rom keeping with unlock bootloader.
Please see my post. May make it help or not.
When I try to burn rom with TWRP, img burns but it doesn't start and zip gives an error and cannot burn.
When I first burned custom ROM (unofficial AEX), it did not start, so when I deleted the data from TWRP, it seems that I deleted things that should not be erased, so even if I burn it from the zip file, with the error message in the image below I...
forum.xda-developers.com