Related
Ok, i've had a problem with it, first i removed the protector that was as large as the device and made the screen very ugly, then i got the one from the box and putted it on, every air-bulb was gone when i kept rubbing etc.
1 stayed, under that bulb there was something white, i found out it was a 'piece' of dust.
It was kind of annoying so i removed the screen-protector, now when im trying to put it on i get lots of 'dust-bubbles',
Anyone has an idea of how to do it or should i just leave my diamond without the screen protector?
Protection
Personally i prefer to have a screenprotecter on my device. I can recommend invisible shield. its very durable and will not be scratched. check it out on www.zagg.com
If you remove the protector, then there will alway be dust next time, because the dust get stuck to the protector glue. (I have also remove mine several times)
I have tried zagg, but I can't recommend it. It is a little sticky (which they also says on their homepage) and I don't like that. The floating feeling is gone. It is also not that invisible.
I have selected to buy a new original protector, and will use that.
The trick to get it on without bobbles is to start on the long edge and then slowly add it. (Keep the 'paper' on as long a possible).
(Michael
willyy1991 said:
Ok, i've had a problem with it, first i removed the protector that was as large as the device and made the screen very ugly, then i got the one from the box and putted it on, every air-bulb was gone when i kept rubbing etc.
1 stayed, under that bulb there was something white, i found out it was a 'piece' of dust.
It was kind of annoying so i removed the screen-protector, now when im trying to put it on i get lots of 'dust-bubbles',
Anyone has an idea of how to do it or should i just leave my diamond without the screen protector?
Click to expand...
Click to collapse
The original is washable. Wash it and dry it with a paper towel that sucks in the water bubbles, wipe dry and clean your screen and reapply it.
By the way, this goes to Accessories forum.
mhfalken said:
If you remove the protector, then there will alway be dust next time, because the dust get stuck to the protector glue. (I have also remove mine several times)
I have tried zagg, but I can't recommend it. It is a little sticky (which they also says on their homepage) and I don't like that. The floating feeling is gone. It is also not that invisible.
I have selected to buy a new original protector, and will use that.
The trick to get it on without bobbles is to start on the long edge and then slowly add it. (Keep the 'paper' on as long a possible).
(Michael
Click to expand...
Click to collapse
Where can you buy a new one, i need it really fast because my phone is without protection right now and no i am affraid of pressing it to hard to leave a permanent mark..
tnyynt said:
The original is washable. Wash it and dry it with a paper towel that sucks in the water bubbles, wipe dry and clean your screen and reapply it.
By the way, this goes to Accessories forum.
Click to expand...
Click to collapse
I did this and the dust keeps coming at the protector and my phone and there will be bubles because the dust gives it a 'height-problem'..
I bought invisible shield for mine, its pretty nice after say 4 days from install.
For first 2 days it might seem really bad but it gets much better.
I somehow scratched it without even noticing it, so I sent picture to zagg and they sent me new one. Even though scratch was very minor.
mhf
hi. this my first post on this web site
excuse me for my bad english
i have a diamond and i remove orginal screen protecter because i write sms with letter recorgnizer and the area that i write words on the screen become white and scratch. i remove orginal and buy a new one that for iphone. i cut it for my phone size and apply it. its sooo much stiky and i have a problem like orginal one.i wnat to remove it and when i do it a tiny layer of glue stand on my diamond screen. i can't clean it. and it give a bad scene to my diamond.
what's your idea. i give u a pichture from my diamond screen.
Perhaps you could use isopropyl alcohol, usually it will remove glue without damaging the plastics surface (in that case: your display). DON'T USE nail polish remover, acetone or even benzine, it will remove the glue too - but your display would look "milky". You can get isopropyl alcohol at the pharmacy.
Tell us if that helped you
mhf said:
hi. this my first post on this web site
excuse me for my bad english
i have a diamond and i remove orginal screen protecter because i write sms with letter recorgnizer and the area that i write words on the screen become white and scratch. i remove orginal and buy a new one that for iphone. i cut it for my phone size and apply it. its sooo much stiky and i have a problem like orginal one.i wnat to remove it and when i do it a tiny layer of glue stand on my diamond screen. i can't clean it. and it give a bad scene to my diamond.
what's your idea. i give u a pichture from my diamond screen.
Click to expand...
Click to collapse
You might be interested in this thread: http://forum.xda-developers.com/showthread.php?t=421229
I didn't get a screen protector with mine... I mean, I had a shipment protector with a little tab for peeling off, but nothing came with it for long term use. It's a Sprint, did they just not include one?
the exim screen protector is very good and smooth
I always use the Brando screenprotectors. See their online shop. They ship worldwide for only $ 3,00 shippingcosts.
It is very easy to install, easy to clean, 100% garanteed scratch free and very durable.
iixnullxii said:
I didn't get a screen protector with mine... I mean, I had a shipment protector with a little tab for peeling off, but nothing came with it for long term use. It's a Sprint, did they just not include one?
Click to expand...
Click to collapse
I've got a Sprint Diamond too, and didn't think I got a protector either, but it was in the separate bag that has the manuals. It should have come with one...Wish it woulda come with an extra one too, oh well.
I had the same problem with misalignment and dust bubbles with the HTC protector on my first few tries...i did however fix the problem...
Take the protector off and clean off the phone...use a microfiber cloth to get all the dust and oil off...after its super clean...take the protector and wash it off with some mild soap...rub the soap in with your fingers and get it clean. Be sure to note which side is down. After its clean, hold it around the edges and let the water bead off...i blew on the protector to get residual water off...some water is ok...actually helps with the install...the basically carefully apply it still holding the sides making sure not to leave finger prints. Start from the top and work your way down... i used a credit card pushed against the microfiber cloth to squeegie the protector down...be carefull with the few drops of water. After you have it down...there might be little bubbles or what looks like water spots where water is trapped under the screen...dont worry...just use your phone and leave it alone. Once it heats up from the excessive phone use it will start to dry up and the protector will come out very nice and smooth. Mine is flawless and i did the wash with soap apply and remove at least 3 or 4 times to get it right...Just be patient
I use screen protector from martinfields, what do you say about, anyone have one??
I think the best in market
My HTC one got a nasty scratch in it last week, so I ordered a Martin Fields.
It arrived this morning and I've got it on without any problems. So far I've noticed:
- It's not a perfect fit like the HTC one was. The hole for the speaker at the top is larger than the hole in the phone. It's not bad though.
- The visibility of the screen does seem better than the HTC protector, but I don't know if it's just the placebo effect of having a more expensive protector.
- It was _easy_ to put on, no bubbles at all
- The protector for the bottom buttons is awful. The circle is just the right size to completely hinder using the touch wheel and it's obvious that you've got a piece of plastic on there.
- It seems smoother than the original HTC one when using the stylus.
So far I'm impressed with it. I didn't bother with the camera hole or bottom hard buttons. The in box HTC one was fine for me, but when I got a scratch on it (my stylus somehow developed a sharp edge), it annoyed me.
I'm using the one supplied as standard with a uk CompactIV and it's great- you can hardly tell it's thereand the sensitivity seems fine.
I have 24 diamond screen protectors. Because i bought 24 diamonds and sold them all without screen protectors so i am sorted untill i buy another phone.
After using the martin fields one for a couple of days, I think it's great.
The screen looks much brighter and clearer through it (I thought the HTC one was great, but I do notice the difference). Plus the smoothness is brilliant, theres pretty much no friction for the stylus or fingers
where can i purchase the htc screen protector? the original that comes in the box...
I used my Nexus S without a screen protector, and there was one day when I was using the phone heavily, this part of the screen felt a little rough to the touch when I was swiping it.
Now when I look at the screen I see these faint track marks on the screen that aren't scratches, but it's like something smudged the screen. I have wiped it with microfibre cloth (My Oakleys pouch) but I can't remove this smudge.
It's barely visible when the screen is on but you can see it if the screen is off.
Does anybody else have this problem? Is it a scratch or can I wash this off somehow?
I have similar spots... it's most likely the oleophobic coating wore off in that area. Not sure how it happens, but it seems to be ****ty coating.
Kayatoast said:
I used my Nexus S without a screen protector, and there was one day when I was using the phone heavily, this part of the screen felt a little rough to the touch when I was swiping it.
Now when I look at the screen I see these faint track marks on the screen that aren't scratches, but it's like something smudged the screen. I have wiped it with microfibre cloth (My Oakleys pouch) but I can't remove this smudge.
It's barely visible when the screen is on but you can see it if the screen is off.
Does anybody else have this problem? Is it a scratch or can I wash this off somehow?
Click to expand...
Click to collapse
dinan said:
I have similar spots... it's most likely the oleophobic coating wore off in that area. Not sure how it happens, but it seems to be ****ty coating.
Click to expand...
Click to collapse
I also have one such small spot that is only visible when the screen is off, and only visible at a certain angle with a lot of light. It's been there since I got the phone. It actually looks like it's under the glass, but I can't tell for sure. I can't feel it. I've been keeping an eye on it and I'll utilize Best Buy's protection plan if it gets worse. Im glad I'm not the only one, but this is a little disappointing.
It's problably the oleophobic coating like others said. I have the same thing on mine, and have been thinking of exchanging it because of it. But I think I might as well keep it, as this phone has no other problems, and I'm sure it will probably wear off any phone I get with due time.
Take a paper towel and lightly go over that area. I bet it comes clean so you can't see it anymore until you wipe your oily fingers in that spot again. It seems oils like to get stuck in those spots unless you clean it with something that absorbs oils, and isn't reused over and over.
Thanks for the replies guys. Yeah I am hesitant to do a return as my phone works great with none of the issues faced by others.
I'll try cleaning it as suggested. Thanks!
Sent from my Nexus S using Tapatalk
I had the smudges that Kayatoast talked about. I just wiped it off with a paper towel and it disappeared. I guess we must clean it with something that absorbs oil.
My smudges probably came from the hand lotion...
I've also decided not to return mine because I don't want to get a replacement phone with a worse problem.
As for wiping it off, this may work for others in some situations, but the spot on mine is definitely a blemish/defect. Cleaning it has zero effect.
I used iklear to clean the screen then wiped it down with a microfibre cloth. That took care of the smudge. Then I slapped a screen protector on it and that took care of the smudge..now to get rid of those air bubbles..lol.
I recommend this brand: http://www.protectionfilms24.com/pr...geraeteklasse=7&marke=Samsung&modell=4603&go=
Arrived in 2 days, made by 3M and doesn't affect my screen clarity at all.
I just realized the same type of smudge on mine today. It's not on top of the screen, but seems like it's under it. Like others, I didn't want to exchange it because everything else works fine plus I'm out of my 30 day period with no exchange.
If I remember, I'm probably going to do a warranty exchange before it ends.
When I was cleaning my screen to put on my cheap eBay screen protector, I noticed the same smudge in the middle of my screen. No amount of cleaning removed it completely. On went the screen protector, and "Voila", smudge disappeared .
BTW, the eBay screen protector is very close to screen feel as the naked screen and is completely clear. Free with the $3.99 shipped silicone case... gotta love eBay!!!
treodoc said:
When I was cleaning my screen to put on my cheap eBay screen protector, I noticed the same smudge in the middle of my screen. No amount of cleaning removed it completely. On went the screen protector, and "Voila", smudge disappeared .
BTW, the eBay screen protector is very close to screen feel as the naked screen and is completely clear. Free with the $3.99 shipped silicone case... gotta love eBay!!!
Click to expand...
Click to collapse
You know, I thought this was a joke until I got the cheap screen protectors that came with the S gel case. Yeah, it disappears. Weird since it looked like the smudge was under the screen.
Phew im glad im not the only one, the smudge is barely noticeable except under light and while the screen is off. Going to try to clean it.
Is the smudge you guys are talking about, blue by chance? I have a slight blue streak underneath my screen since it was purchased. To best describe it, it looks like a shiney blue streak from cleaning with windex that never dries.
Sent from my Nexus S using XDA App
Can anyone recommend a good brand of screen protector? I went with case mate, as I had one on my desire HD and was very pleased with it - it fitted great and even after a year it still had plenty of life in it.
However the one that turned up for my sensation is rubbish, it only covers the LCD area - no protection over the capacitive buttons, and I keep catching the top when swiping the notification bar, so it's lifting up already.
Ideally I'm after one that will cover the whole screen, and isn't cheap and nasty.
chrisund123 said:
Can anyone recommend a good brand of screen protector? I went with case mate, as I had one on my desire HD and was very pleased with it - it fitted great and even after a year it still had plenty of life in it.
However the one that turned up for my sensation is rubbish, it only covers the LCD area - no protection over the capacitive buttons, and I keep catching the top when swiping the notification bar, so it's lifting up already.
Ideally I'm after one that will cover the whole screen, and isn't cheap and nasty.
Click to expand...
Click to collapse
I have the OEM HTC ones I got from Expansys. You get two of them. I don't remember how much they cost though. I think you can get them through htcpedia.com as well.
http://www.expansys.com/htc-sensation-screen-protector-sp-p540-2-pieces-retail-pack-218032/
Didn't realise HTC did ones, will definitely check them out! Thanks for the heads up.
chrisund123 said:
Didn't realise HTC did ones, will definitely check them out! Thanks for the heads up.
Click to expand...
Click to collapse
They fit pretty exact too FYI. Any mm off and you gotta redo the stinkin thing lol. It took me a good 20 mins to place it on the way I want it. I mean if you are off, you will get some bubbles in the corners, but they fit the entire screen. There's a write up in this section back when the Senny first came out and everyone was clamoring in which screen protector to get. Some like others, I am happy with the OEM ones. I still have it on to this day. I have one hairline scratch from keys that can be seen in certain angles, but other than that, the protector is great IMO.
GL.
Cool, just bought a set from eBay. Can't be any worse than this one I'm usin now lol.
i personally like the the invisibleSHIELD by ZAGG theyre pretty good in quality and last a long time now with any screen rotector as you know with time it will get really scratched with use but you should try these maybe youll like them they usually range anywhere from.. 0.99 to 3.99 fir a pack just look around ebay amazon... etc etc
meckanoid said:
i personally like the the invisibleSHIELD by ZAGG theyre pretty good in quality and last a long time now with any screen rotector as you know with time it will get really scratched with use but you should try these maybe youll like them they usually range anywhere from.. 0.99 to 3.99 fir a pack just look around ebay amazon... etc etc
Click to expand...
Click to collapse
I like Zagg, but I tried it back for my ol Nexus One and the outer skin/protector was nice, but to me the screen protector was too hazy for me and also a little tacky for my taste. Did they change the material for the protector?
well to tell you the truth i think theyre material might have improved a tad bit in quality but its like everything it does wear out eventually with time but i can understand the hazy part it does tend to be a little bit a problem for me
Best thing is still using no protector. Tried several and always get the feeling my touch is less responsive.
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
i bought the iprotect crytalclear,
the distance from the corner to the screen protector is quite big (picture added) sometimes your finger gets stock, if you try to pull down the notification bar or using swipepad
i probally would buy another one
Well the HTC screen protectors (2 pack) arrived today, and again I'm slightly disappointed. On the plus side they are lovely and clear, and cover the whole of the screen. It's also very thin, so doesn't feel like its hampering the touch input at all (although my previous case mate screen protectors were thicker I never felt they effected the input either).
The biggest downside was that because they are so thin, they're near impossible to fit. After carefully peeling off the backing, you just cant hold the thing. It Took me forever to apply the first one, and subsequently it had one bit of dust trapped under it in the middle of the screen. Not much, but I'm a perfectionist! So one down, one to go... I peeled it off and tried again, this time I was rewarded with two specs of dust... But they were over the capacitive buttons so I'm willing to live with that.
The other problem I had was that the screen protectors were glued onto the packaging and if I'd just pulled them off they would have creased and been ruined. In the end I cut them off gently by sliding a sharp knife underneath them.
So, in conclusion I have a semi decent fitting screen protector on but I won't be buying these again when it reaches the end of its life.
I would highly recommend the Skinomi Techskin. I use them on all of my devices. Same concept as Zagg but they are a little thinner and the screen still retains the 'glass' feel. For me the Zagg is a bit too much and my finger drags on the screen at times with it.
The fit on the Sensation is perfect and installation isn't too difficult.
chrisund123 said:
Well the HTC screen protectors (2 pack) arrived today, and again I'm slightly disappointed. On the plus side they are lovely and clear, and cover the whole of the screen. It's also very thin, so doesn't feel like its hampering the touch input at all (although my previous case mate screen protectors were thicker I never felt they effected the input either).
The biggest downside was that because they are so thin, they're near impossible to fit. After carefully peeling off the backing, you just cant hold the thing. It Took me forever to apply the first one, and subsequently it had one bit of dust trapped under it in the middle of the screen. Not much, but I'm a perfectionist! So one down, one to go... I peeled it off and tried again, this time I was rewarded with two specs of dust... But they were over the capacitive buttons so I'm willing to live with that.
The other problem I had was that the screen protectors were glued onto the packaging and if I'd just pulled them off they would have creased and been ruined. In the end I cut them off gently by sliding a sharp knife underneath them.
So, in conclusion I have a semi decent fitting screen protector on but I won't be buying these again when it reaches the end of its life.
Click to expand...
Click to collapse
Have you tried the tape trick for the dust? It's always best to put screen protectors on somewhere dust free like the bathroom. Always wash your hands before as well.
And I myself took a good 20 mins putting on mine because of the exact fit of them. I had to take off and reapply like 7 times. But I got the hang of it as of now. And if you are greeted with specks of dust, get a piece of scotch tape. Lift one end of the screen protector with another piece of scotch tape that is closest to your speck(s) and then use the scotch tape in your other hand to stick the particles from the screen protector or screen itself. It takes some finesse but it can be done, I have confidence in you! :victory: lol
Here's a more recent pic of the HTC screen protector. I do have minor bubbling on the corners because I just redid the Screen protector to align correctly because the case I have on which I just got kept lifting it. Reason being, the screen protector was off to the right a bit lol. I can live with the minor bubbling on the corners and you can't see the bubbles when looking straight at it either. See the second pic
kpjimmy said:
Have you tried the tape trick for the dust? It's always best to put screen protectors on somewhere dust free like the bathroom. Always wash your hands before as well.
And I myself took a good 20 mins putting on mine because of the exact fit of them. I had to take off and reapply like 7 times. But I got the hang of it as of now. And if you are greeted with specks of dust, get a piece of scotch tape. Lift one end of the screen protector with another piece of scotch tape that is closest to your speck(s) and then use the scotch tape in your other hand to stick the particles from the screen protector or screen itself. It takes some finesse but it can be done, I have confidence in you! :victory: lol
Here's a more recent pic of the HTC screen protector. I do have minor bubbling on the corners because I just redid the Screen protector to align correctly because the case I have on which I just got kept lifting it. Reason being, the screen protector was off to the right a bit lol. I can live with the minor bubbling on the corners and you can't see the bubbles when looking straight at it either. See the second pic
Click to expand...
Click to collapse
woww, what a great lockscreen!!
Where didi you get it from?
piratashitzu said:
woww, what a great lockscreen!!
Where didi you get it from?
Click to expand...
Click to collapse
Thanks, I created it with the inspiration from cvdesignlab from mycolorscreen. The lockscreen is widgetlocker which consists of three UCCW widgets, which I created the call/email/text(each has hotspots to the corresponding app) and battery charging widget, the weather widget in the middle reporting on my local weather, which has a hotspot, when pressed, goes to my weather app of choice.
And a "hotspot" is a term by the app creator, meaning when created, the corresponding hotspot will auto open any app you direct using the UCCW app.
And the time is a simple edit to an existing clock found in the UCCW thread made by the author of the app. Oh and the calendar right below the weather is my minimalistic text widget I created because I almost missed a dental appt a few weeks ago lol
There are a bit of parts to it but it has all the info I need at first glance without needing to get "into" the phone.
i use Ishieldz, and its the best screen protector i've had!
Skinomi as many people have mention about
Sent w/ HTC Sensation 4G (Z710a) XDA Premium
ebay these are the ones i use dont last long but they are good
If you have trouble getting the edges to settle. Apply the screen protector as best you can. Then grab a hair drier, set it to hot and from about 12 inches warm up the phone. Keep moving the hair dryer as you can burn yourself. Keep doing that while working the edges down with your other hand. I have big hands so I can hold the phone in my hand and use my thumb. Eventually they will stick.
I too have BS ebay screen protectors and the reason it covers only the LCD area and not the entire face is because of the curvature at the edges.
I haven`t been using anything for almost a year and my screen is perfect...
Just installed the Bodyguardz Pure Tempered Glass screen protector with the Express Align tray on my white Galaxy S6.
It is 100% Halo Free and went on pretty much perfect. Not sure how it would come out on the black S6 but I'm not complaining about mine.
I have installed tons of screen protector over the years and this is my first Bodyguardz. The Express Align tray works perfect and I highly recommend it.
Just made sure you push real hard and wait for the protector to adhere to the phone before trying to remove the Express Align tray.
Well worth the $35.00 from the AT&T Store. I also have the Zagg as a back up but don't think I'll be needing it right now.
It's a little short on the top and bottom but that is how they avoid the halo.
I'm sure Bodyguardz will be offering their "Crown" for the S6 Pure in the near future.
I also managed to installed it without getting any junk under the screen
(the spots in pics are only in the pics, not under glass).
Here are a few pictures.
Can you share any tips that help to prevent dust or lint get under the screen during installation?
AirSupply said:
Can you share any tips that help to prevent dust or lint get under the screen during installation?
Click to expand...
Click to collapse
Just a real clean area and have a nice bright light over the area you are working on. Also a can of compressed air comes in handy. Soft Micro Fiber rags. I use the Giottos Large Rocket Blower ( used with my cameras). I believe that they are only like $10. and something you will always use as I do. Bodyguardz is coming out with their "Crown" for the S6 to fill in the spaces.
http://www.amazon.com/Giottos-Rocket-Blaster-Blower-Large/dp/B00017LSPI
My tip for a clean and lint free installation. Go into your bathroom. Turn on the shower with hot water. Let it get nice and steamy. It will settle the dust in the room and then clean and apply the screen protector. Sounds crazy but been doing this for years and never get anything under my screen protectors.
c_86 said:
My tip for a clean and lint free installation. Go into your bathroom. Turn on the shower with hot water. Let it get nice and steamy. It will settle the dust in the room and then clean and apply the screen protector. Sounds crazy but been doing this for years and never get anything under my screen protectors.
Click to expand...
Click to collapse
+1
I've been doing this for a while to.
Sent from my SM-G920V using XDA Free mobile app
c_86 said:
My tip for a clean and lint free installation. Go into your bathroom. Turn on the shower with hot water. Let it get nice and steamy. It will settle the dust in the room and then clean and apply the screen protector. Sounds crazy but been doing this for years and never get anything under my screen protectors.
Click to expand...
Click to collapse
That depends on your location actually. I also do the same but Moscow is very very dusty city and I live near the highway... so even after the hot shower I can see particles floating))) Usually I buy couple of protectors so succeed with at least one, that is not an option with a 35 bucks SP though )
Another vote for the steamy shower route.
I'm tempted to pull this one off and try the Zagg I have sitting here.
If it was not so short on the top & bottom it would be perfect.
So my idea worked and i now have a full adhesive screen protector. Covers from edge to edge and there is no halo effect. The protector is on good and does not peel/pop out. I am using a unicorn beetle pro full body case and no problems. Before the case would pop out the protector but not anymore.
What exactly was your idea?
How did you manage this? (For the people that haven't been keeping up with your posts, such as myself.)
Did you use LOCA or OCA film?
Sent from my Galaxy Note7 using Tapatalk
so much detail. so much wow. i wish there was more information, like, what you used, how you did it, instead of a brag post. thanks for the pictures though!
One of his older posts discussed using LOCA. If you use LOCA, how do you get it off if you ever want to remove the screen protector?
Yes I used LOCA glue. To take it off you just heat it. It should be easier to remove than when replacing the digitizer.
I got a couple air bubbles though but id rather have that than a scratched up screen lol
Interesting.... but more info on how to do it and what products to use would be great. Thanks OP.
I was just thinking about if this was a solution two days ago, but this is exciting news that its worked. My question is, is the LOCA a problem to handle, because i could see using too much might have some go into the speakers or just seep from the borders. when originally applied. and is there a way to make sure we don't get bubbles?
teegunn said:
Interesting.... but more info on how to do it and what products to use would be great. Thanks OP.
Click to expand...
Click to collapse
Donnyohs said:
I was just thinking about if this was a solution two days ago, but this is exciting news that its worked. My question is, is the LOCA a problem to handle, because i could see using too much might have some go into the speakers or just seep from the borders. when originally applied. and is there a way to make sure we don't get bubbles?
Click to expand...
Click to collapse
Yea i got a little on the speaker but you just have to be care full and as it seeps kut clean it with a rag. The good thing is that it wont dry until you put the black light on it. The part you have to be the most carefull with is the home button. Loca will make it sticky and a little harder to press. I also reccoment you get a protector that is completely clear as the one i got has black on the top and bottom and it prevents the black light from drying the glue under those areas. Clean the screen good. To avoid bubbles look at youtube and see how they apply it. Basically a stick figure but instead of a head it is a y shape. Carefully place the protector and let is slowly spread on its own. Once it stoos spreading then you could slowly press down on it and remove the remaining bubbles. I lined uo thw home and back buttons first and made sure the cut outs were aligned for the camera and sesors. Then i applied the black light on the bottom half furst so that it would align properly. I did this while pressing down on it because the air bubbles kept coming up. I also covered up the top half so that wouldnt dry up. Oncw i got the bottom i got rid of any air bubbles on the top half and did the same. After that i put the phone in a box., close it up, do a cut out for the black light to fit and let it sit for a couple minutes to dry more. Then i cleaned and dried the edges. Make sure not to leave too much of the loca in between the screen and protector so you wont get touch senaitivity issues. And do it where there is no dust. I oly got 1 small air bubble but some like white spots that appear to be dust. And again clean the speaker, home button, sensors, and camera before drying. You could also just scrape it off with a plastic blade that the loca came with. And make sure to use liquid version and not the film.