Hello. I have a Poco X3 NFC and this is my problem:
I had OrangeFox recovery on it. I wanted to install another rom (from Arow OS because it wasn't work well), and one of the requirements was a decrypted device. I've flashed a file which is said it can decrypt it (and it did). After the flash, I rebooted my phone and everything was fine until I rebooted my phone again. Now the recovery bootlooped, the phone can't boot the system and adb doesn't recognize my phone in fastboot mode. It's weird that when the phone stucks at OrangeFox logo, adb recognizes my device (as in recovery mode). So I type the command "adb reboot fastboot" and it loops at the recovery again. I can go fastboot mode but fastboot doesn't recognize my phone, so I can't flash anything either. It's 4:20 a.m. in here and I can't sleep because of this.
Can u restore a backup?
Arealhooman said:
Can u restore a backup?
Click to expand...
Click to collapse
No. I can't reach anything in my phone. Currently I am waiting for the battery run out maybe something would change
Can you access orange fox itself?
Your battery can take weeks to run out. But try it.
Arealhooman said:
Do you have stock recovery?
Click to expand...
Click to collapse
No. I think it's not impossible to find in somewhere but my main problem is my PC won't recognize my phone in the fastboot mode. If it would, I can flash twrp or anything.
You need fastboot to access fastbootd right?
Arealhooman said:
You need fastboot to access fastbootd right?
Click to expand...
Click to collapse
I do not understand what you mean but I can go into the fastboot mode in my phone, the problem is adb doesn't recognize my phone.
Your PC sees your device though?
Arealhooman said:
Your PC sees your device though?
Click to expand...
Click to collapse
When I plug in my cable, I can hear that "something is plugged in" voice in my pc. When I look device manager, it shows the phone as "Android Composite ADB Interface". When it stucks in recovery, it doesn't quickly boot so I can see my device in adb:
List of devices attached
940ab842 recovery
this is showed in adb when my phone stucks at recovery, but I can give commands like "reboot".
But when I type " reboot system", it doesn't reboot it system and just tries to open recovery mode, and recovery mode doesn't open, just loops.
I type ''reboot fastboot", but it still tries to open recovery and again, it loops.
I type "reboot bootloader", at this time, it can boot to the fastboot mode, there is an orange "fastboot" word at the middle. When I go back to adb and type "adb devices", it shows nothing.
Arealhooman said:
Can you access orange fox itself?
Click to expand...
Click to collapse
No, I cannot. It is looped. This is the another problem prevents me to recover my phone.
Arealhooman said:
Can u restore a backup?
Click to expand...
Click to collapse
I think Arrow OS files still in my phone but somehow it pretends like it can't detect them. And it wants to boot directly to the recovery mode but the another problem is recovery mode stuck in loop. When I want to flash a new recovery, this time I can't connect my phone to my pc when it's in the fastboot mode. It's like a problems chain and I couldn't find any exit.
sorry, no idea
Arealhooman said:
sorry, no idea
Click to expand...
Click to collapse
Guess so, I'll go to a phone repair shop to see if they can do something about it (maybe their pc can detect my phone and they can flash another recovery), and if not then I am ****ed.
Arealhooman said:
sorry, no idea
Click to expand...
Click to collapse
DUDE I ****ING SOLVED IT!
FIRSTLY, **** ORANGEFOX, if anybody see this do not use orangefox.
Secondly, actually I still have the same problem. TWRP is also stucks at the loop, but there is an interesting difference that TWRP tries to loop one time and after the fail, it suddenly boots the system.
And since I can flash something with fastboot, now I think i can save my phone. Now I'm trying to install stock rom, i'll update after.
How I solved:
Installing the Google Universal USB Drivers. It has a weird method to install, and I wasn't know you can install a driver even the phone is in the fastboot mode. So thanks to that I was able to install usb drivers and finally I could get fastboot to recognize my device. The first thing I did was installing TWRP.
My problem was not solved even I installed TWRP because TWRP was doing the same thing, but one thing was different: TWRP was trying to boot recovery, it couldn't and after it was booting to the system. So I've realized how amazing TWRP is. But it wasn't solved my problem completely though, I think its problem is related to that decryption file.
Currently, I've managed to install stock rom and I haven't encountered any problem.
And I'm happy because my mother won't beat me with her slippers.
Related
So... Anyone have any experience getting sticky bit turned off on fastboot? My phone boots to it anytime I try to reboot or do a regular boot up.
fallnSaint said:
So... Anyone have any experience getting sticky bit turned off on fastboot? My phone boots to it anytime I try to reboot or do a regular boot up.
Click to expand...
Click to collapse
Mine did that for a short while after I screwed up a flash, I reflashed boot and while running tossed the adb command to get into fastboot and then left it properly. Haven't seen it since.
KitsunePaws said:
Mine did that for a short while after I screwed up a flash, I reflashed boot and while running tossed the adb command to get into fastboot and then left it properly. Haven't seen it since.
Click to expand...
Click to collapse
To clarify... Flash boot from recovery, while that is running adb reboot bootloader? If that is the case I have a different set of problems to "boot", I can't get my pc to recognize the phone while in recovery. Everything else is recognized, even reinstalled drivers to be certain, pc doesn't even try to install a driver for recovery. Tried both TWRP & CWM.
fallnSaint said:
To clarify... Flash boot from recovery, while that is running adb reboot bootloader? If that is the case I have a different set of problems to "boot", I can't get my pc to recognize the phone while in recovery. Everything else is recognized, even reinstalled drivers to be certain, pc doesn't even try to install a driver for recovery. Tried both TWRP & CWM.
Click to expand...
Click to collapse
Memory is fuzzy but I'm pretty sure I did it from fastboot, this happened to me about the time shabby was trying to fastboot boot boot.img and I ended up flashing it instead.
KitsunePaws said:
Memory is fuzzy but I'm pretty sure I did it from fastboot, this happened to me about the time shabby was trying to fastboot boot boot.img and I ended up flashing it instead.
Click to expand...
Click to collapse
I had this same issue when porting TWRP ^^^.
I can't seem to find my posts on it right now, but someone just said do a clean flash. No problems since
how did you do this please!
fallnSaint said:
So... Anyone have any experience getting sticky bit turned off on fastboot? My phone boots to it anytime I try to reboot or do a regular boot up.
Click to expand...
Click to collapse
Okay, this will probably help you...while your device is in Sticky Bit Factory Fastboot, open up a command prompt and connect to your device (given you know how to do so in your folder containing your fastboot app and drivers). Then type "fastboot oem fb_mode_clear" This command will allow your device to boot into system normally. Problem is (I think) when a failed flash occurs sometimes it sets your device in that mode and the above command clears it. Another way to manually place a device in the same state you described is to enter this command using fastboot: fastboot oem fb_mode_set. I believe that is how RSD Lite automatically reboots your device into factory fastboot mode after flashing partitions (.mbn) on your system so that it may resume flashing the boot, recovery, and system images, etc. Let me know if it helps.....
Sent from my XT897 using xda premium
Hi,
I tried to install a ROM but it got stuck on the white screen with the HTC logo. I tried to do factory reset but it gets stuck again. I don't have clockwork recovery, and I rooted my phone using adb and ace recovery, which is not on my phone. I only temporarily used it to flash my rom, stupid I know. :-/ When I connect my phone to the PC it is not being recognized. I tried putting the PD98IMG.zip file on my sd card but it just says that it the image is incorrect. Is there anything I can do? Is this fixable?
brickdummy said:
Hi,
I tried to install a ROM but it got stuck on the white screen with the HTC logo. I tried to do factory reset but it gets stuck again. I don't have clockwork recovery, and I rooted my phone using adb and ace recovery, which is not on my phone. I only temporarily used it to flash my rom, stupid I know. :-/ When I connect my phone to the PC it is not being recognized. I tried putting the PD98IMG.zip file on my sd card but it just says that it the image is incorrect. Is there anything I can do? Is this fixable?
Click to expand...
Click to collapse
Flash a recovery.img from fastboot. What is an ace recovery? Read my signature for the HTC logo problem.
brickdummy said:
Hi,
I tried to install a ROM but it got stuck on the white screen with the HTC logo. I tried to do factory reset but it gets stuck again. I don't have clockwork recovery, and I rooted my phone using adb and ace recovery, which is not on my phone. I only temporarily used it to flash my rom, stupid I know. :-/ When I connect my phone to the PC it is not being recognized. I tried putting the PD98IMG.zip file on my sd card but it just says that it the image is incorrect. Is there anything I can do? Is this fixable?
Click to expand...
Click to collapse
I just went through some similar stuff. What type of computer are you using? PC/Mac? Are you using the original cable? What troubleshooting steps for connectivity have you done? Different cable? USB port?
Can you access the bootloader screen when you pull the battery and reboot while holding the volume button down and holding the power button? By accident, I found that the phone and PC will communicate with each other when "Fastboot" is selected on the bootloader screen (you should hear a connection chime and it should change to "Fastboot USB") except I could only get fastboot commands to work. The good news is that should be enough to flash a boot or whatever else you need to get back in business.
shadowboxx said:
I just went through some similar stuff. What type of computer are you using? PC/Mac? Are you using the original cable? What troubleshooting steps for connectivity have you done? Different cable? USB port?
Can you access the bootloader screen when you pull the battery and reboot while holding the volume button down and holding the power button? By accident, I found that the phone and PC will communicate with each other when "Fastboot" is selected on the bootloader screen (you should hear a connection chime and it should change to "Fastboot USB") except I could only get fastboot commands to work. The good news is that should be enough to flash a boot or whatever else you need to get back in business.
Click to expand...
Click to collapse
Hi, Thanks for the reply.I am using windows 7. I downloaded the drivers for HTC, and I am using a data cable and the USB port in the back of my computer, nearest the mother board. I do see "Fastboot USB" on the phone but when i type in the command prompt "adb devices" I get nothing.
brickdummy said:
Hi, Thanks for the reply.I am using windows 7. I downloaded the drivers for HTC, and I am using a data cable and the USB port in the back of my computer, nearest the mother board. I do see "Fastboot USB" on the phone but when i type in the command prompt "adb devices" I get nothing.
Click to expand...
Click to collapse
That's great you're getting the fastboot usb message! As long as you're not using a hub or some other usb extender, any functioning usb port on the pc will do. Again, I learned this by accident (ie the hard way) and found that in this mode, only fastboot commands will work, not adb. (on a side note, and others should correct me here, adb and fastboot work together when the phone is rebooted normally or in recovery but not in the bootloader screen)
Great test for connection: fastboot devices (if you get anything else except a serial # with fastboot after it, then close the cmd window, unplug, and pull battery/reboot to bootloader), fastboot reboot-bootloader. Once it reboots back into the bootloader screen, make sure you press the power button while fastboot is selected and you should again hear the chime and see fastboot usb come up. This is your phone saying it's ready to accept your fastboot commands.
Do let us know how it works.
bananagranola said:
Flash a recovery.img from fastboot. What is an ace recovery? Read my signature for the HTC logo problem.
Click to expand...
Click to collapse
Hi I actually saw your post earlier thank you. I will work on this. I found it in a tutorial when I rooted my phone with HTC dev, ace_recovery_ext_4.img. I'll post where i found it later.
bananagranola said:
Flash a recovery.img from fastboot. What is an ace recovery? Read my signature for the HTC logo problem.
Click to expand...
Click to collapse
when i flashboot the recovery.img file it goes to the red triangle.
brickdummy said:
Hi I actually saw your post earlier thank you. I will work on this. I found it in a tutorial when I rooted my phone with HTC dev, ace_recovery_ext_4.img. I'll post where i found it later.
Click to expand...
Click to collapse
Hi the program is actually called 4EXT Recovery Touch. I finally was able to open it through fastboot....Now all thats left is to find the right zip file to put my phone back to stock.
shadowboxx said:
That's great you're getting the fastboot usb message! As long as you're not using a hub or some other usb extender, any functioning usb port on the pc will do. Again, I learned this by accident (ie the hard way) and found that in this mode, only fastboot commands will work, not adb. (on a side note, and others should correct me here, adb and fastboot work together when the phone is rebooted normally or in recovery but not in the bootloader screen)
Great test for connection: fastboot devices (if you get anything else except a serial # with fastboot after it, then close the cmd window, unplug, and pull battery/reboot to bootloader), fastboot reboot-bootloader. Once it reboots back into the bootloader screen, make sure you press the power button while fastboot is selected and you should again hear the chime and see fastboot usb come up. This is your phone saying it's ready to accept your fastboot commands.
Do let us know how it works.
Click to expand...
Click to collapse
Hi, this did work, thank you. Would you happen to know how i can load the stock software on my phone? I had it rooted before im not sure if its still rooted. I also managed to get the 4ext recovery on my phone too.
shadowboxx said:
(on a side note, and others should correct me here, adb and fastboot work together when the phone is rebooted normally or in recovery but not in the bootloader screen)
Click to expand...
Click to collapse
As far as I know, fastboot only works when your phone is in fastboot mode. ADB works in recovery or system.
brickdummy said:
Hi, this did work, thank you. Would you happen to know how i can load the stock software on my phone? I had it rooted before im not sure if its still rooted. I also managed to get the 4ext recovery on my phone too.
Click to expand...
Click to collapse
Flash a rooted stock ROM from recovery. Whether you have root is in your system partition. Whether your bootloader is unlocked is in your bootloader. Whether you have a custom recovery is in your recovery partition. Three separate things.
As for your post in your other thread, read my signature.
bananagranola said:
As far as I know, fastboot only works when your phone is in fastboot mode. ADB works in recovery or system.
Flash a rooted stock ROM from recovery. Whether you have root is in your system partition. Whether your bootloader is unlocked is in your bootloader. Whether you have a custom recovery is in your recovery partition. Three separate things.
Click to expand...
Click to collapse
I'm sorry, I have no idea what I am doing. Can you show me the steps? When I try installing a stock rom zip file in my recovery from my sd card it aborts.
brickdummy said:
I'm sorry, I have no idea what I am doing. Can you show me the steps? When I try installing a stock rom zip file in my recovery from my sd card it aborts.
Click to expand...
Click to collapse
I'm guessing that you're trying to flash a PD98IMG.zip or a RUU. You need an actual stock rooted ROM, probably from here on the forum. Or just flash Android Revolution HD, an optimized rooted stock ROM, also from here on the forum in the development section. For more specific steps read the Ace Think Tank linked in my signature.
bananagranola said:
I'm guessing that you're trying to flash a PD98IMG.zip or a RUU. You need an actual stock rooted ROM, probably from here on the forum. Or just flash Android Revolution HD, an optimized rooted stock ROM, also from here on the forum in the development section. For more specific steps read the Ace Think Tank linked in my signature.
Click to expand...
Click to collapse
Ok, one more thing. I have S-ON. does that matter?
----
It did not, lol anyway it worked. Thank you everyone for you help. I really appreciate it.
-----
For those wondering I found the stock rooted rom here http://http://forum.xda-developers.com/showthread.php?t=996368
http://forum.xda-developers.com/showthread.php?p=26617631
Instructions to flash the rom
http://http://forum.xda-developers.com/showthread.php?t=2168500
brickdummy said:
Ok, one more thing. I have S-ON. does that matter?
Click to expand...
Click to collapse
Yes. You need to read the part in my signature about being stuck in the splash screen.
bananagranola said:
Yes. You need to read the part in my signature about being stuck in the splash screen.
Click to expand...
Click to collapse
ok, got it. Thank you again
Dear friends,
I have this problem: I got a brand new TCL S720 and the Google Play did not work, being a known rom issue. So, before doing anything, I've managed to make a backup of it's original rom with MTK Droid tools whichI supose it did it well. Then I've tried to install a CWM recovery to try a custom rom for it. The CWM recovery seemed to install succesfully but I didn't manage to install the new rom. If I remember well, it stucked on boot logo. Then tried to revert at it's original stock recovery, managed to have the phone back as it was in initial state, but doing more tries, It remained stucked on boot logo. The problem is that my computer doesn't recognise it anymore, when I connect it to USB it tries to install MTP usb driver but even before the driver was installed well, now it refuse to install, like the driver is not good or the proper driver doesn't exist. So the only thing I can do is to boot on stock recovery but even I tried to copy the original rom update.zip on external SD and to flash the phone using install update from sd card in recovery mode, It doesn't find the external sd card. So I'm stuck here, the computer doesn't detect the phone to try flashing it with SP flash tool or MTK Droid tool, and I also can't flash it from sd card. Have you any idea how to make it work again?
Thanks in advance.
Hey guys.
Some issues right now....
I can't get the phone to boot. It gets stuck on boot logo. I can get it into fastboot, but not recovery.
If I try to enter recovery, it shows boot logo, then change brightness level a little bit for some reason, then nothing. Back to boot logo after screen goes black.
So it appears that the TWRP isn't installed correctly, but I've reinstalled it several times, but it never actually seems to work.
I can see the device in fastboot. Bootloader is also unlocked.
So, does anyone have a solution for this issue?
I can get it into fastboot
Click to expand...
Click to collapse
This is good news as it means you should be able to just flash the recovery from fastboot.
1. Download the latest TWRP Recovery: http://twrp.me/devices/bacon (I believe this is the link, it's blocked at school )
2. type the command
fastboot flash recovery /location/of/twrp/img
Click to expand...
Click to collapse
3. Wait for it to complete and then reboot the device by holding down power and volume down.
4. Then if it boots into TWRP you should be able to mount it on the computer you plug it into and then carry over a ROM and/or GApps files.
I'm in the exact same boat, happened after I tried an OTA update. I can't flash anything into the phone via ADB because my phone isn't recognised. isn't recognised in ADB. This is while I am in Fastboot. I'm on OSX.
Rorys-MBP:~ Rory$ adb devices
List of devices attached
Click to expand...
Click to collapse
hi guys,
i my shield is stuck on the nvidia logo when booting normally, if it brings up the bootloader, it shows unlocked but hitting continue caused it to freeze on the screen, recovery freezes on nvidia logo and fastboot protocol just brings it back to this screen. i orginally installed twrp and it confirmed successful flash of new os .... on reboot it bricked to its now state, i cant get into twrp or get my pc to see it to install a new copy
anyone got any ideas
thanks
@Fairmax don't click continue, it freezes because there is nothing to continue to, as long as you can enter bootloader your device isn't fully bricked. So, to fix your problem you will have to download official ROM from nvidia's site (https://developer.nvidia.com/shield-open-source find your model and click recovery images).
When you download latest ROM unzip it and follow the textual guide, but, there will be one file missing (i can't remember which one, user data maybe or something like that), don't worry and just continue with the next step. After you flash just reboot to system by holding power button. Good luck !
i cant seem to get it to be recognised by windows all i get is this-- Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor failed.--
trying to install nvidia usb driver via have disk bring up an error that the file is not usable with x64 system
ok after many driver reinstall iv got device manager to say android adb interface but still not showing on on device list in cmd
Fairmax said:
ok after many driver reinstall iv got device manager to say android adb interface but still not showing on on device list in cmd
Click to expand...
Click to collapse
Which command did you type in?
fpozar said:
Which command did you type in?
Click to expand...
Click to collapse
adb devices shows no devices
i tried the 3 different option in the driver install which was android adb, bootloader, and something else and nothing shows in devices. i tried it on my laptop and a different cable and cant get adb to list the device :crying:
Fairmax said:
adb devices shows no devices
i tried the 3 different option in the driver install which was android adb, bootloader, and something else and nothing shows in devices. i tried it on my laptop and a different cable and cant get adb to list the device :crying:
Click to expand...
Click to collapse
Well of course adb devices shows no devices because you are not actually in adb mode, you are in the bootloader mode. Just download minimal fastboot and adb, install it and extract recovery image into the folder where you installed minimal adb and fastboot (you don't need any other drivers).After you did this and your device is in bootloader and connected, click on the path in your fastboot & adb folder and delete everything and type cmd. No need to do adb devices, just proceed with fastboot flash ...
fpozar said:
Well of course adb devices shows no devices because you are not actually in adb mode, you are in the bootloader mode. Just download minimal fastboot and adb, install it and extract recovery image into the folder where you installed minimal adb and fastboot (you don't need any other drivers).After you did this and your device is in bootloader and connected, click on the path in your fastboot & adb folder and delete everything and type cmd. No need to do adb devices, just proceed with fastboot flash ...
Click to expand...
Click to collapse
ah now that makes sence....silly me i dont do this very often . so fastboot saw device and iv uploaded all parts of the recovery image and rebooted but it is still stuck on the nvidia logo, that was the original file so now il try 5.2.0 and see if that works
Fairmax said:
ah now that makes sence....silly me i dont do this very often . so fastboot saw device and iv uploaded all parts of the recovery image and rebooted but it is still stuck on the nvidia logo, that was the original file so now il try 5.2.0 and see if that works
Click to expand...
Click to collapse
You can also try flashing twrp and then lineageos or something from twrp.
fpozar said:
You can also try flashing twrp and then lineageos or something from twrp.
Click to expand...
Click to collapse
good news after a few hours of trying (usb dropped connection a few times then battery died) it finally works again .....been over 2 years since iv had this shield running after nvidia did the recall , now goto put a different rom on there so it dosnt update and kill itself
Hello I had a similar issue with my k1 tablet and ended up flashing factory images via adb fastboot and all flashed fine. Now my tablet is stuck on the boot screen with the green and white nvidia logo. How long does it take to boot please?
I have same issue too. I can load TWRP and flash the other partitions but TWRP shows un-mountable partitions and even a full stock ROM flash will not allow it to boot. I have a similar issue with a recall tablet. what did you do to fix it?
hello guys
how do i root this phone please.
none of the google searched guides seem to work.
1. i've unlocked the bootloader using the asus app
2. i have adb installed on my pc
3. i've enabled usb debug mode on phone and allowing installation unknown apps
4. i've installed magisk v23 by downloading from github and just installing the apk file normally
5. i've downloaded a 2.9gb zip file from asus for androind 11 firmware onto phone and pc (but its a zip file that extracts a bin file, no image file)
my problem seems to be i don't know how to CREATE AND PATCH an image file or install twrp and install image file that way.
Could someone help, there doesn't seem to be any guides for rooting in this phones forum.
Look in the twrp thread: https://forum.xda-developers.com/t/recovery-official-twrp-for-asus-zenfone-7-series.4161719/
after twrp you can flash the magisk.zip
Seosam said:
Look in the twrp thread: https://forum.xda-developers.com/t/recovery-official-twrp-for-asus-zenfone-7-series.4161719/
after twrp you can flash the magisk.zip
Click to expand...
Click to collapse
i keep getting era waiting for device when i want to flash the phoben with twrp.
adb reboot bootloader (works and i enter the recovery menu start, bootloader, recovery, power off etc)
fastboot flash recovery_a twrp.img (when i type this cmd power shell just says waiting for device)
i have universal drivers installed and android sdk installed. not sure why it isn't recognising the phone?
When my phone is switched on normally, cmd recognises it, when i use adb devices. but as soon as i reboot into recovery mode using cmd "adb reboot bootloader" it stops recognising the phone on the list of devices using the cmd "adb devices"
so you don`t get an answer from your phone by "fastboot devices" ?
Have you tried another usb cable and or port?
Seosam said:
so you don`t get an answer from your phone by "fastboot devices" ?
Have you tried another usb cable and or port?
Click to expand...
Click to collapse
no answer from phone when in fastboot mode.
but i do get a reply in cmd when phone is switched on normally.
I'll try with another cable, but if it responds to adb when in normal mode. doesn't it mean it's not a cable issue but a software driver issue?
Seosam said:
so you don`t get an answer from your phone by "fastboot devices" ?
Have you tried another usb cable and or port?
Click to expand...
Click to collapse
seems when i do adb reboot bootloader it goes into what i thought was called fastboot. It even says fastboot.
but in that mode my phone isn't recognised by cmd when type adb devices, it doesn't come up.
it has 4 options reboot system now, botloader, enter recovery, reboot to bootloader, power off.
if i then select enter recovery. it enters a smaller text screen with lots of small blue writing. when inside that screen (recovery mode) cmd seems to recognise my device.
but it says it is unauthorized. this is in recovery mode.
i'm not sure why it says it is unauthorized. i've authorised my pc to control the phone through the fingerprint, when the message popped up.
but i can't push the twrp.img file through because of this.
since cmd doesn't seem to recognise phone in fastboot mode.
and cmd doesn't seem to have authorisation in recovery mode.
any ideas?
is it possible to root using adb sideload or install twrp using adb sideload?
articoceanic said:
seems when i do adb reboot bootloader it goes into what i thought was called fastboot. It even says fastboot.
but in that mode my phone isn't recognised by cmd when type adb devices, it doesn't come up.
it has 4 options reboot system now, botloader, enter recovery, reboot to bootloader, power off.
if i then select enter recovery. it enters a smaller text screen with lots of small blue writing. when inside that screen (recovery mode) cmd seems to recognise my device.
but it says it is unauthorized. this is in recovery mode.
i'm not sure why it says it is unauthorized. i've authorised my pc to control the phone through the fingerprint, when the message popped up.
but i can't push the twrp.img file through because of this.
since cmd doesn't seem to recognise phone in fastboot mode.
and cmd doesn't seem to have authorisation in recovery mode.
any ideas?
Click to expand...
Click to collapse
Thats the right mode.
Does the phone at normal start show that the bootloader is unlocked?
Your debugging mode is turned on in developer settings?
A sideload isn`t possible I think.
Seosam said:
Thats the right mode.
Does the phone at normal start show that the bootloader is unlocked?
Your debugging mode is turned on in developer settings?
A sideload isn`t possible I think.
Click to expand...
Click to collapse
yes, shows bootloader is unlocked when i start the phone.
usb debugging mode is turned on.
i think for some reason in fastboot mode the device driver is not recognised in windows. have googled seems it was a very old problem that happned on phones 6 years ago. nut i haven't found anything recent to solve same error.
articoceanic said:
yes, shows bootloader is unlocked when i start the phone.
usb debugging mode is turned on.
i think for some reason in fastboot mode the device driver is not recognised in windows. have googled seems it was a very old problem that happned on phones 6 years ago. nut i haven't found anything recent to solve same error.
Click to expand...
Click to collapse
So you can just try it on another pc.
Have you changed from USB 3 port to a USB 2?
My Xiaomi mix2s had sometimes this too. That's worked for me.
Seosam said:
So you can just try it on another pc.
Have you changed from USB 3 port to a USB 2?
My Xiaomi mix2s had sometimes this too. That's worked for me.
Click to expand...
Click to collapse
i think its definitely a driver issue. windows 10 seems to be overriding the drivers and installing wrong ones. and won't let me install right ones.
haven't tried in a different pc. will need to get hold of one and try.
Seosam said:
So you can just try it on another pc.
Have you changed from USB 3 port to a USB 2?
My Xiaomi mix2s had sometimes this too. That's worked for me.
Click to expand...
Click to collapse
dont'know what happened. but weirdly i used usb 2.0 as you said and the driver listed on page 2 of this link got recognised.
[RECOVERY][OFFICIAL] TWRP for ASUS ZenFone 7 Series
*** Disclaimer *** All flashing is done at your own risk! While nothing from this thread should break your device, don't come back here blaming anyone if it does! Introduction Team Win Recovery Project 3.x, or twrp3 for short, is a custom...
forum.xda-developers.com
all this time windows 10 wouldn't let me install it. kept saying the drivers i already had was the best ones. but weirdly this time it did.
thanks friend. i think i have root access now. magisk keeps asking me to install the app tho. not sure why. i have version 23.0 installed.
but when i opne magisk it shows install icons for magisk and an unknown App. both listed as version 23.0.
Seosam said:
So you can just try it on another pc.
Have you changed from USB 3 port to a USB 2?
My Xiaomi mix2s had sometimes this too. That's worked for me.
Click to expand...
Click to collapse
last question friend, thanks for all your help.
where do i download apps like ad block plus adaway minmingaurd etc.
magisk dowsn't seem to have an option for that.
articoceanic said:
last question friend, thanks for all your help.
where do i download apps like ad block plus adaway minmingaurd etc.
magisk dowsn't seem to have an option for that.
Click to expand...
Click to collapse
how solve com.asus.service keep stopping after install twrp? android 11 stock rom please answer
decade 1 said:
how solve com.asus.service keep stopping after install twrp? android 11 stock rom please answer
Click to expand...
Click to collapse
I'm not sure.
i only managed to root it by following the instructions here years ago.
maybe try updating the asus apps in play store? or ask some of the other people here who know more than me. or disable the asus apps. i don't use them.
sorry i couldn't help more
articoceanic said:
I'm not sure.
i only managed to root it by following the instructions here years ago.
maybe try updating the asus apps in play store? or ask some of the other people here who know more than me. or disable the asus apps. i don't use them.
sorry i couldn't help more
Click to expand...
Click to collapse
I try factory reset normal again I hope no recurrence