after flashing the crdroid custom rom, my device went into bootloop, i tried to re-flash the stock rom, nothing, i tried to re-flash the costum rom i had before, nothing, i tried to flash all the img manually , nothing, still that damn bootlooop, can someone help me please? from what i understand this is soft brick
Gamer_Mida said:
after flashing the crdroid custom rom, my device went into bootloop, i tried to re-flash the stock rom, nothing, i tried to re-flash the costum rom i had before, nothing, i tried to flash all the img manually , nothing, still that damn bootlooop, can someone help me please? from what i understand this is soft brick
Click to expand...
Click to collapse
@Gamer_Mida Thread closed as duplicate of your post here:
Gamer_Mida said:
after flashing this custom rom, my device went into bootloop, i tried to re-flash the stock rom, nothing, i tried to re-flash the costum rom i had before, nothing, i tried to flash all the img manually , nothing, still that damn bootloop, can someone help me please? from what i understand this is soft brick
Click to expand...
Click to collapse
Please review the XDA Forum Rules with special emphasis on rule no. 5 and post only ONCE! Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator
Related
Hi guys. I tried to post in the thread for this rom, but i'm a new user and i can't make it.
Well, i tried to flash this rom http://forum.xda-developers.com/showthread.php?t=2096458, hoping it was like the first image from the topic.
But, when i started the phone, it was totally different from the image! I tried to flash the other .zip "colorfix" but it still the same thing.
Anybody can help me? Thanks.
Try to get into recovery and reset it.
Daniel120201 said:
Try to get into recovery and reset it.
Click to expand...
Click to collapse
So, i've already did it but still the same
Hi guys, please help me I've downloaded the rom for p3100 and I have
philz recovery. I did the steps according to adi When the setup is finished it says flashed successful and I reboot it, It hangs at
the "samsung galaxy tab 2" screen ive waited for 5 hrs and nothings
happen. My kernel is Agni kernels that adi provided for sungsonic 2
and I did a clean install ive wiped everything. What should I do?
Should I flash jellybean 4.2.2 first? any suggestions? :crying:
ZeeOwns said:
Hi guys, please help me I've downloaded the rom for p3100 and I have
philz recovery. I did the steps according to adi When the setup is finished it says flashed successful and I reboot it, It hangs at
the "samsung galaxy tab 2" screen ive waited for 5 hrs and nothings
happen. My kernel is Agni kernels that adi provided for sungsonic 2
and I did a clean install ive wiped everything. What should I do?
Should I flash jellybean 4.2.2 first? any suggestions? :crying:
Click to expand...
Click to collapse
I suggest u to change your custom kernel to blackhawk next kernel and don't forget to flash bloob next ...
now I tried flashing the kernels first the next kernel then the blob then flashed the sung sonic v4 still no luck then I tried vice versa still nonluck anyway thank u for replying I appreciated your help
ZeeOwns said:
now I tried flashing the kernels first the next kernel then the blob then flashed the sung sonic v4 still no luck then I tried vice versa still nonluck anyway thank u for replying I appreciated your help
Click to expand...
Click to collapse
Format your internal memory via PC.. Go to recovery wipe data, cache n delvk.. Go to download mode and Flash stock 4.1.2 of ur region.. Root ur tab.. Install latest Philz touch recovery.. Then install adi's sshdv4..follow all instructions.. DONT INSTALL ANY CUSTOM RECOVERY AT THE TIME OF INSTALATION.. Good luck..
¤Help = Thanked ©
Sent from Heaven
solved?
ZeeOwns said:
now I tried flashing the kernels first the next kernel then the blob then flashed the sung sonic v4 still no luck then I tried vice versa still nonluck anyway thank u for replying I appreciated your help
Click to expand...
Click to collapse
Hi mate, did you solve it?
Don't worry, as long as you have recovery mode and download mode you have good chances for happy-end
Maybe you're too far from stock now with all your kernels etc, so something is not compatible.
Best you can do IMO is to flash via Odin3_v1.87 any stock ROM for your region (there are many tutorials for using Odin if you never did it) if after unzipping only one single big file appears, choose it under PDA (don't check re-partition), set you Tab into download mode and flash it. If several files are there, each belongs under its section. (in that case if you are not sure how, just quote my post and ask again, I will answer you)
After that you can root the stock ROM, install CWM recovery and flash whatever you wish
tetakpatak said:
Hi mate, did you solve it?
Don't worry, as long as you have recovery mode and download mode you have good chances for happy-end
Maybe you're too far from stock now with all your kernels etc, so something is not compatible.
Best you can do IMO is to flash via Odin3_v1.87 any stock ROM for your region (there are many tutorials for using Odin if you never did it) if after unzipping only one single big file appears, choose it under PDA (don't check re-partition), set you Tab into download mode and flash it. If several files are there, each belongs under its section. (in that case if you are not sure how, just quote my post and ask again, I will answer you)
After that you can root the stock ROM, install CWM recovery and flash whatever you wish
Click to expand...
Click to collapse
Bro, unfortunately I've tried it 3x but no luck... Until now I cn't flash sshdv4 anyways thanks..
ZeeOwns said:
Bro, unfortunately I've tried it 3x but no luck... Until now I cn't flash sshdv4 anyways thanks..
Click to expand...
Click to collapse
Mate, I'm bit short ov experience with the Tab as it didn't make me yet so many problems like my phone did. If you can't revive it, just send it to Samsung service.
It isn't at all especially increddible idea but it won't cost too much and should definitely help.....
I have completely wiped my phone trying to install a rom and there is nothing what so ever on it . How do install a rom to it? Please help!!
Mr Shax said:
I have completely wiped my phone trying to install a rom and there is nothing what so ever on it . How do install a rom to it? Please help!!
Click to expand...
Click to collapse
You know the sticky threads that explain how to flash a rom? They're full of information. You can flash the factory image in a few minutes.
Mr Shax said:
I have completely wiped my phone trying to install a rom and there is nothing what so ever on it . How do install a rom to it? Please help!!
Click to expand...
Click to collapse
As said above flash stock in fastboot or push/sideload a custom rom with adb in (custom) recovery.
Please, need help.
My mate only starts on fastboot mode. Can flash stock and cwm recoveries, but dont works. No dload. Nothing. Please somebody who knows what to do.
Thanks a lot.
I'm having the same issue on my MT7-L10. I flashed the stock firmware (extracted from the URL consumer.huawei.com/en/support/downloads/detail/index.htm?id=32364 using update.app extractor) using CWM and the phone never boot up again. It only shows the Ascend logo and stops there. I've never had any problem using CWM to flash firmwares on it before. So I am assuming the extracted firmware is the cause.
I can access the bootloader and flash recovery (both custom and stock) or boot img, but the phone would not boot up. Since I can't get to the recovery, there wasn't much else I could do; let alone, flash the backup. It had been 2 weeks since that happened and I tried many methods but found no solution online. Might as well give up on it unless there's a real solution for us.
please solution
semo9 said:
please solution
Click to expand...
Click to collapse
Flash original recovery put desired firmware in dload sd card and do 3BTN
semo9 said:
please solution
Click to expand...
Click to collapse
If you installed CWM it is logical that you can' t install stock ROM, neither 3buttons can start...
This has been already discussed and repeated so many times before.
Please, be so kind to use the "search" button next time and give a look in the proper section of this FORUM.
You would have fount the "solution" in a while, instead of asking.
Please consider this next time. Thank you !!!
tuddu said:
If you installed CWM it is logical that you can' t install stock ROM, neither 3buttons can start...
This has been already discussed and repeated so many times before.
Please, be so kind to use the "search" button next time and give a look in the proper section of this FORUM.
You would have fount the "solution" in a while, instead of asking.
Please consider this next time. Thank you !!!
Click to expand...
Click to collapse
I tried all what you say. Of course, i reflashed the stock recovery first, but I can't acces to recoverys stock with dload.
And of course, i read and tried all threads before asking.
Thanks.
mek32 said:
I tried all what you say. Of course, i reflashed the stock recovery first, but I can't acces to recoverys stock with dload.
And of course, i read and tried all threads before asking.
Thanks.
Click to expand...
Click to collapse
u don't need to access stock recovery .. it isn't like custom where u can move around .. in orig recovery is only wipe factory and reboot that's all...
just do what i told that other guy .. let us know..
unbrick
nekokari said:
I'm having the same issue on my MT7-L10. I flashed the stock firmware (extracted from the URL consumer.huawei.com/en/support/downloads/detail/index.htm?id=32364 using update.app extractor) using CWM and the phone never boot up again. It only shows the Ascend logo and stops there. I've never had any problem using CWM to flash firmwares on it before. So I am assuming the extracted firmware is the cause.
I can access the bootloader and flash recovery (both custom and stock) or boot img, but the phone would not boot up. Since I can't get to the recovery, there wasn't much else I could do; let alone, flash the backup. It had been 2 weeks since that happened and I tried many methods but found no solution online. Might as well give up on it unless there's a real solution for us.
Click to expand...
Click to collapse
did you find any solution to this problem.........
mpt123 said:
did you find any solution to this problem.........
Click to expand...
Click to collapse
I took it to the Huawei service center. A week later, they called and said that it was a defect on motherboard and replaced it for me. No solution on my end.
nekokari said:
I took it to the Huawei service center. A week later, they called and said that it was a defect on motherboard and replaced it for me. No solution on my end.
Click to expand...
Click to collapse
Thanks for letting me know....im facing the same problem.
So for whatever reason, I can't flash twrp. I have done it many times in the past but its not working now. i tried like 3 different versions and no success.i downloaded the file off twrp site and flashed with odin but still have the stock recovery? can someone please help
HeliosV said:
So for whatever reason, I can't flash twrp. I have done it many times in the past but its not working now. i tried like 3 different versions and no success.i downloaded the file off twrp site and flashed with odin but still have the stock recovery? can someone please help
Click to expand...
Click to collapse
Greetings,
For us to be able to assist you, you must provide your device model.
Thanks.
The Merovingian said:
Greetings,
For us to be able to assist you, you must provide your device model.
Thanks.
Click to expand...
Click to collapse
Well i already fixed it, by factory resetting with Kies 3. thank you though
Thread closed.
User resolved.